1 files changed, 0 insertions, 342 deletions
diff --git a/iosApp/WhirlyGlobeMaplyComponent.xcframework/ios-arm64/WhirlyGlobeMaplyComponent.framework/Headers/MaplyCoordinate.h b/iosApp/WhirlyGlobeMaplyComponent.xcframework/ios-arm64/WhirlyGlobeMaplyComponent.framework/Headers/MaplyCoordinate.h
deleted file mode 100644
index d1c01e8..0000000
--- a/iosApp/WhirlyGlobeMaplyComponent.xcframework/ios-arm64/WhirlyGlobeMaplyComponent.framework/Headers/MaplyCoordinate.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- *  MaplyCoordinate.h
- *  WhirlyGlobe-MaplyComponent
- *
- *  Created by Steve Gifford on 7/21/12.
- *  Copyright 2011-2022 mousebird consulting
- *
- *  Licensed under the Apache License, Version 2.0 (the "License");
- *  you may not use this file except in compliance with the License.
- *  You may obtain a copy of the License at
- *  http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software
- *  distributed under the License is distributed on an "AS IS" BASIS,
- *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *  See the License for the specific language governing permissions and
- *  limitations under the License.
- *
- */
-
-#import <Foundation/Foundation.h>
-#import <CoreLocation/CoreLocation.h>
-
-/** 
-    A 2D coordinate representation.
-    
-    The Maply Coordinate is a simple 2 dimensional coordinate
-    passed around to numerous methods.  For geo-coordinates x
-    maps to longitude and y to latitude and the values are
-    in radians.
-  */
-typedef struct
-{
-    float x,y;
-} MaplyCoordinate;
-
-
-static const MaplyCoordinate kMaplyNullCoordinate = {.x = FLT_MIN, .y = FLT_MIN};
-
-
-/** 
-    Double precision version of 2D coordinate.
-    
-    This works the same was as the MaplyCoordinate, but has
-    more precision.
-  */
-typedef struct
-{
-    double x,y;
-} MaplyCoordinateD;
-
-static const MaplyCoordinateD kMaplyNullCoordinateD = {.x = DBL_MIN, .y = DBL_MIN};
-
-
-/** 
-    A 3D coordinate representation.
-    
-    The 3D version of the Maply Coordinate adds a z values, often
-    in meters, but not always.  Consult the appropriate method to
-    be sure.
-  */
-typedef struct
-{
-    float x,y,z;
-} MaplyCoordinate3d;
-
-/** 
-    An NSObject based wrapper for 3D coordinates.
-    
-    This wrapper encapsulates a MaplyCoordinate3d so we can pass them around in NSDictionary objects.
-  */
-@interface MaplyCoordinate3dWrapper : NSObject
-
-/// Initialize with a 3D coordinate
-- (instancetype)initWithCoord:(MaplyCoordinate3d)coord;
-
-/// 3D coordinate
-@property (nonatomic,readonly) MaplyCoordinate3d coord;
-
-@end
-
-typedef struct
-{
-    double x,y,z;
-} MaplyCoordinate3dD;
-
-static const MaplyCoordinate3dD kMaplyNullCoordinate3dD = {.x = DBL_MIN, .y = DBL_MIN, .z = DBL_MIN};
-
-/** 
-    An NSObject based wrapper for 3D coordinates.
- 
-    This wrapper encapsulates a MaplyCoordinate3d so we can pass them around in NSDictionary objects.
- */
-@interface MaplyCoordinate3dDWrapper : NSObject
-
-/// Initialize with a 3D coordinate
-- (instancetype)initWithCoord:(MaplyCoordinate3dD)coord;
-
-/// 3D coordinate
-@property (nonatomic,readonly) MaplyCoordinate3dD coord;
-
-@end
-
-/** 
-    Represents a bounding box in a particular coordinate system.
-    
-    ll is the lower left and ur is the upper right.
-  */
-typedef struct
-{
-    MaplyCoordinate ll;
-    MaplyCoordinate ur;
-} MaplyBoundingBox;
-
-static const MaplyBoundingBox kMaplyNullBoundingBox = {
-	.ll = {.x = FLT_MIN, .y = FLT_MIN},
-	.ur = {.x = FLT_MIN, .y = FLT_MIN}
-};
-
-/**
-    A category that uses NSValue to store MaplyCoordinate data
- */
-@interface NSValue (MaplyCoordinate)
-+ (instancetype)valueWithMaplyCoordinate:(MaplyCoordinate)value;
-@property (readonly) MaplyCoordinate maplyCoordinateValue;
-@end
-
-/**
-    A category that uses NSValue to store MaplyCoordinateD data
- */
-@interface NSValue (MaplyCoordinateD)
-+ (instancetype)valueWithMaplyCoordinateD:(MaplyCoordinateD)value;
-@property (readonly) MaplyCoordinateD maplyCoordinateDValue;
-@end
-
-/**
-    A category that uses NSValue to store MaplyBoundingBox data
- */
-@interface NSValue (MaplyBoundingBox)
-+ (instancetype)valueWithMaplyBoundingBox:(MaplyBoundingBox)value;
-@property (readonly) MaplyBoundingBox maplyBoundingBoxValue;
-@end
-
-/** 
-    Represents a bounding box in a particular coordinate system.
-    
-    ll is the lower left and ur is the upper right.
- */
-typedef struct
-{
-	MaplyCoordinateD ll;
-	MaplyCoordinateD ur;
-} MaplyBoundingBoxD;
-
-static const MaplyBoundingBoxD kMaplyNullBoundingBoxD = {
-	.ll = {.x = DBL_MIN, .y = DBL_MIN},
-	.ur = {.x = DBL_MIN, .y = DBL_MIN}
-};
-
-#if __cplusplus
-extern "C" {
-#endif
-
-/** 
-    Construct a MaplyCoordiante with longitude and latitude values in radians.
-    
-    MaplyCoordinate's are in radians when they represent lon/lat values.  This constructs one with radians as input.
-    
-    @return A 2D MaplyCoordinate in radians (if representing a lon/lat value).
-  */
-MaplyCoordinate MaplyCoordinateMake(float radLon,float radLat);
-
-/** 
-    Construct a MaplyCoordianteD with longitude and latitude values in radians.
-    
-    MaplyCoordinate's are in radians when they represent lon/lat values.  This constructs one with radians as input.
-    
-    @return A 2D MaplyCoordinateD in radians (if representing a lon/lat value).
-    */
-MaplyCoordinateD MaplyCoordinateDMake(double radLon,double radLat);
-    
-/** 
-    Construct a MaplyGeoCoordinate with longitude and latitude values in degrees.
-    
-    MaplyCoordinate's are in radians when they represent lon/lat values.  This function does that conversion for you.
-    
-    @param degLon The longitude value (east to west) in degrees.
-    
-    @param degLat The latitude value (north to south) in degrees.
-    
-    @return A 2D MaplyCoordinate in radians (if representing a lon/lat value).
-  */
-MaplyCoordinate MaplyCoordinateMakeWithDegrees(float degLon,float degLat);
-
-/** 
-    Construct a MaplyGeoCoordinate with longitude and latitude values in degrees.
- 
-    MaplyCoordinate's are in radians when they represent lon/lat values.  This function does that conversion for you.
- 
-    @param degLon The longitude value (east to west) in degrees.
- 
-    @param degLat The latitude value (north to south) in degrees.
- 
-    @return A 2D MaplyCoordinate in radians (if representing a lon/lat value).
- */
-MaplyCoordinateD MaplyCoordinateDMakeWithDegrees(double degLon,double degLat);
-
-/** 
-    Construct a MaplyCoordinateD with a MaplyCoordinate.
-    
-    This function constructs a MaplyCoordinateD with the component values of the input MaplyCoordinate.
-    
-    @param c The input MaplyCoordinate value.
-    
-    @return A 2D MaplyCoordinateD in radians (if representing a lon/lat value).
-  */
-MaplyCoordinateD MaplyCoordinateDMakeWithMaplyCoordinate(MaplyCoordinate c);
-
-/**
-    Construct a MaplyCoordinate with a MaplyCoordinateD.
-    
-    This function constructs a MaplyCoordinate with the component values of the input MaplyCoordinateD.
-    
-    @param c The input MaplyCoordinateD value.
-    
-    @return A 2D MaplyCoordinate in radians (if representing a lon/lat value).
-  */
-MaplyCoordinate MaplyCoordinateMakeWithMaplyCoordinateD(MaplyCoordinateD c);
-
-/**
-    Construct a MaplyCoordinat3d from the values given.
-    
-    @param x The x value, or longitude in radians if we're making geo coordinates.
-    
-    @param y The y value, or latitude in radians if we're making geo coordinates.
-    
-    @param z The z value, sometimes this is display coordinates (radius == 1.0 for a sphere)
-              and sometimes this is meters.  It depends on how you're using it.
-    
-    @return A 3D MaplyCoordinate3d in radians + other (if representing a lon/lat value).
-  */
-MaplyCoordinate3d MaplyCoordinate3dMake(float x,float y,float z);
-
-/** 
-    Construct a MaplyCoordinat3d from the values given.
-    
-    @param x The x value, or longitude in radians if we're making geo coordinates.
-    
-    @param y The y value, or latitude in radians if we're making geo coordinates.
-    
-    @param z The z value, sometimes this is display coordinates (radius == 1.0 for a sphere)
- and sometimes this is meters.  It depends on how you're using it.
-    
-    @return A 3D MaplyCoordinate3d in radians + other (if representing a lon/lat value).
- */
-MaplyCoordinate3dD MaplyCoordinate3dDMake(double x,double y,double z);
-
-/** 
-    Construct a MaplyBoundingBox from the values given.
-    
-    The inputs are in degrees and the order is longitude *then* latitude.
-    
-    @param degLon0 The left side of the bounding box in degrees.
-    
-    @param degLat0 The bottom of the bounding box in degrees.
-    
-    @param degLon1 The right side of the bounding box in degrees.
-    
-    @param degLat1 The top of the bounding box in degrees.
-    
-    @return A MaplyBoundingBox in radians.
-  */
-MaplyBoundingBox MaplyBoundingBoxMakeWithDegrees(float degLon0,float degLat0,float degLon1,float degLat1);
-
-/** Double version of MaplyBoundingBoxMakeWithDegrees
-  */
-MaplyBoundingBoxD MaplyBoundingBoxDMakeWithDegrees(double degLon0,double degLat0,double degLon1,double degLat1);
-
-/** 
-    Check if two bounding boxes overlap.
-     
-    @return Returns true if they did overlap, false otherwise.
-  */
-bool MaplyBoundingBoxesOverlap(MaplyBoundingBox bbox0,MaplyBoundingBox bbox1);
-    
-/** 
-    Check if a bounding contains a given coordinate.
-     
-    @return Returns true if the bounding box contains the coordinate.
-  */
-bool MaplyBoundingBoxContains(MaplyBoundingBox bbox, MaplyCoordinate c);
-
-/**
-  Set up a bounding box from a list of 2D locations.
- */
-MaplyBoundingBox MaplyBoundingBoxFromLocations(const CLLocationCoordinate2D locs[], unsigned int numLocs);
-
-/**
-  Set up a bounding box from a list of 2D coordinates
- */
-MaplyBoundingBox MaplyBoundingBoxFromCoordinates(const MaplyCoordinate coords[], unsigned int numCoords);
-MaplyBoundingBox MaplyBoundingBoxFromCoordinatesD(const MaplyCoordinateD coords[], unsigned int numCoords);
-MaplyBoundingBoxD MaplyBoundingBoxDFromCoordinates(const MaplyCoordinate coords[], unsigned int numCoords);
-MaplyBoundingBoxD MaplyBoundingBoxDFromCoordinatesD(const MaplyCoordinateD coords[], unsigned int numCoords);
-
-/**
-  Expand a bounding box with a list of 2D coordinates
- */
-MaplyBoundingBox MaplyBoundingBoxAddCoordinates(MaplyBoundingBox box, const MaplyCoordinate coords[], unsigned int numCoords);
-MaplyBoundingBox MaplyBoundingBoxAddCoordinatesD(MaplyBoundingBox box, const MaplyCoordinateD coords[], unsigned int numCoords);
-MaplyBoundingBoxD MaplyBoundingBoxDAddCoordinates(MaplyBoundingBoxD box, const MaplyCoordinate coords[], unsigned int numCoords);
-MaplyBoundingBoxD MaplyBoundingBoxDAddCoordinatesD(MaplyBoundingBoxD box, const MaplyCoordinateD coords[], unsigned int numCoords);
-
-/**
- Return the intersection of two bounding boxes.
- */
-MaplyBoundingBox MaplyBoundingBoxIntersection(MaplyBoundingBox bbox0,MaplyBoundingBox bbox1);
-
-/** 
-    Expands a bounding box by a given fraction of its size.
-     
-    @return Returns the expanded bounding box.
-  */
-MaplyBoundingBox MaplyBoundingBoxExpandByFraction(MaplyBoundingBox bbox, float buffer);
-    
-/** 
-    Calculate the great circle distance between two geo coordinates.
-    
-    This calculates the distance on a sphere between one point and another.
-    
-    @param p0 The starting point, lon/lat in radians.
-    
-    @param p1 The end point, lon/lat in radians.
-    
-    @return The distance between p0 and p1 in meters.
-  */
-double MaplyGreatCircleDistance(MaplyCoordinate p0,MaplyCoordinate p1);
-    
-#if __cplusplus
-}
-#endif
-