summaryrefslogtreecommitdiff
path: root/pcr/gforth/gforth.patch
diff options
context:
space:
mode:
Diffstat (limited to 'pcr/gforth/gforth.patch')
-rw-r--r--pcr/gforth/gforth.patch366
1 files changed, 366 insertions, 0 deletions
diff --git a/pcr/gforth/gforth.patch b/pcr/gforth/gforth.patch
new file mode 100644
index 000000000..fe05be2c3
--- /dev/null
+++ b/pcr/gforth/gforth.patch
@@ -0,0 +1,366 @@
+diff -ruN gforth-0.7.3/build-ec.in gforth-0.7.3-patched/build-ec.in
+--- gforth-0.7.3/build-ec.in 2013-10-11 17:31:28.038991905 -0400
++++ gforth-0.7.3-patched/build-ec.in 2015-07-24 16:25:00.008107177 -0400
+@@ -19,7 +19,7 @@
+
+ arch=$1
+
+-./gforth --die-on-signal -m 4M -p ".:~+:." -i @kernel_fi@ exboot.fs -e 'fpath= .|~+|.' -e "s\" arch/$arch/mach.fs\"" ./kernel/main.fs -e "save-cross kernl-$arch.fi- /usr/local/bin/gforth-0.6.2-20060312 bye"
++./gforth --die-on-signal -m 4M -p ".:~+:." -i @kernel_fi@ exboot.fs -e 'fpath= .|~+|.' -e "s\" arch/$arch/mach.fs\"" ./kernel/main.fs -e "save-cross kernl-$arch.fi- /usr/bin/gforth-0.6.2-20060312 bye"
+ if [ -f `echo arch/$arch/mach.fs | sed s/fs/sh/` ]
+ then sh `echo arch/$arch/mach.fs | sed s/fs/sh/` kernl-$arch.fi
+ else cp -p kernl-$arch.fi- kernl-$arch.fi
+diff -ruN gforth-0.7.3/configure gforth-0.7.3-patched/configure
+--- gforth-0.7.3/configure 2014-06-13 18:52:28.488838343 -0400
++++ gforth-0.7.3-patched/configure 2015-07-24 16:23:27.778934664 -0400
+@@ -569,7 +569,7 @@
+ #
+ # Initializations.
+ #
+-ac_default_prefix=/usr/local
++ac_default_prefix=/usr
+ ac_clean_files=
+ ac_config_libobj_dir=.
+ LIBOBJS=
+@@ -5976,7 +5976,7 @@
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-as_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
++as_dummy="$PATH:/sbin:/usr/sbin:/usr/bin"
+ for as_dir in $as_dummy
+ do
+ IFS=$as_save_IFS
+diff -ruN gforth-0.7.3/configure.in gforth-0.7.3-patched/configure.in
+--- gforth-0.7.3/configure.in 2014-06-13 18:52:10.408636383 -0400
++++ gforth-0.7.3-patched/configure.in 2015-07-24 16:31:36.213823759 -0400
+@@ -659,7 +659,7 @@
+ AC_CHECK_FILE($srcdir/arch/$machine/disasm.fs,[disasm_fs=arch/$machine/disasm.fs],)
+ AC_SUBST(disasm_fs)
+
+-AC_PATH_PROG(INSTALL_INFO,install-info,[echo '>>>>Please make info dir entry:'],$PATH:/sbin:/usr/sbin:/usr/local/sbin)
++AC_PATH_PROG(INSTALL_INFO,install-info,[echo '>>>>Please make info dir entry:'],$PATH:/sbin:/usr/sbin:/usr/bin)
+
+ case "$host_os" in
+ *win32*)
+diff -ruN gforth-0.7.3/doc/gforth.1 gforth-0.7.3-patched/doc/gforth.1
+--- gforth-0.7.3/doc/gforth.1 2013-10-11 17:31:28.043991965 -0400
++++ gforth-0.7.3-patched/doc/gforth.1 2015-07-24 16:37:50.552874465 -0400
+@@ -75,7 +75,7 @@
+ files instead of the default in the environment variable
+ \fCGFORTHPATH\fR
+ or the path specified at installation time (typically
+-\fC/usr/local/lib/gforth:.\fR. A path is given as a
++\fC/usr/lib/gforth:.\fR. A path is given as a
+ .BR : -separated
+ list.
+ .TP
+diff -ruN gforth-0.7.3/doc/gforth.ds gforth-0.7.3-patched/doc/gforth.ds
+--- gforth-0.7.3/doc/gforth.ds 2013-10-11 17:31:28.047992013 -0400
++++ gforth-0.7.3-patched/doc/gforth.ds 2015-07-24 16:39:59.918092652 -0400
+@@ -699,7 +699,7 @@
+ Uses @i{path} for searching the image file and Forth source code files
+ instead of the default in the environment variable @code{GFORTHPATH} or
+ the path specified at installation time (e.g.,
+-@file{/usr/local/share/gforth/0.2.0:.}). A path is given as a list of
++@file{/usr/share/gforth/0.2.0:.}). A path is given as a list of
+ directories, separated by @samp{:} (on Unix) or @samp{;} (on other OSs).
+
+ @cindex --dictionary-size, command-line option
+@@ -1060,19 +1060,19 @@
+
+ @itemize @bullet
+ @item
+-@file{/usr/local/bin/gforth}
++@file{/usr/bin/gforth}
+ @item
+-@file{/usr/local/bin/gforthmi}
++@file{/usr/bin/gforthmi}
+ @item
+-@file{/usr/local/man/man1/gforth.1} - man page.
++@file{/usr/man/man1/gforth.1} - man page.
+ @item
+-@file{/usr/local/info} - the Info version of this manual.
++@file{/usr/info} - the Info version of this manual.
+ @item
+-@file{/usr/local/lib/gforth/<version>/...} - Gforth @file{.fi} files.
++@file{/usr/lib/gforth/<version>/...} - Gforth @file{.fi} files.
+ @item
+-@file{/usr/local/share/gforth/<version>/TAGS} - Emacs TAGS file.
++@file{/usr/share/gforth/<version>/TAGS} - Emacs TAGS file.
+ @item
+-@file{/usr/local/share/gforth/<version>/...} - Gforth source files.
++@file{/usr/share/gforth/<version>/...} - Gforth source files.
+ @item
+ @file{.../emacs/site-lisp/gforth.el} - Emacs gforth mode.
+ @end itemize
+@@ -4193,7 +4193,7 @@
+ In common with many, if not most, Forth compilers, most of Gforth is
+ actually written in Forth. All of the @file{.fs} files in the
+ installation directory@footnote{For example,
+-@file{/usr/local/share/gforth...}} are Forth source files, which you can
++@file{/usr/share/gforth...}} are Forth source files, which you can
+ study to see examples of Forth programming.
+
+ Gforth maintains a history file that records every line that you type to
+@@ -14890,7 +14890,7 @@
+ and one for your program, @pxref{Select Tags Table,,Selecting a Tags
+ Table,emacs, Emacs Manual}). The TAGS file for the preloaded words is
+ @file{$(datadir)/gforth/$(VERSION)/TAGS} (e.g.,
+-@file{/usr/local/share/gforth/0.2.0/TAGS}). To get the best behaviour
++@file{/usr/share/gforth/0.2.0/TAGS}). To get the best behaviour
+ with @file{etags.fs}, you should avoid putting definitions both before
+ and after @code{require} etc., otherwise you will see the same file
+ visited several times by commands like @code{tags-search}.
+@@ -15346,7 +15346,7 @@
+ format:
+
+ @example
+-#! /usr/local/bin/gforth-0.4.0 -i
++#! /usr/bin/gforth-0.4.0 -i
+ @end example
+
+ The file and pathname for the Gforth engine specified on this line is
+@@ -15358,7 +15358,7 @@
+ file into an executable. For example, if you place this text in a file:
+
+ @example
+-#! /usr/local/bin/gforth
++#! /usr/bin/gforth
+
+ ." Hello, world" CR
+ bye
+diff -ruN gforth-0.7.3/doc/gforth.info-1 gforth-0.7.3-patched/doc/gforth.info-1
+--- gforth-0.7.3/doc/gforth.info-1 2014-06-13 18:55:21.596773767 -0400
++++ gforth-0.7.3-patched/doc/gforth.info-1 2015-07-24 16:45:39.191289764 -0400
+@@ -611,7 +611,7 @@
+ Uses path for searching the image file and Forth source code files
+ instead of the default in the environment variable `GFORTHPATH' or
+ the path specified at installation time (e.g.,
+- `/usr/local/share/gforth/0.2.0:.'). A path is given as a list of
++ `/usr/share/gforth/0.2.0:.'). A path is given as a list of
+ directories, separated by `:' (on Unix) or `;' (on other OSs).
+
+ `--dictionary-size size'
+@@ -906,19 +906,19 @@
+ When you install Gforth on a Unix system, it installs files in these
+ locations by default:
+
+- * `/usr/local/bin/gforth'
++ * `/usr/bin/gforth'
+
+- * `/usr/local/bin/gforthmi'
++ * `/usr/bin/gforthmi'
+
+- * `/usr/local/man/man1/gforth.1' - man page.
++ * `/usr/man/man1/gforth.1' - man page.
+
+- * `/usr/local/info' - the Info version of this manual.
++ * `/usr/info' - the Info version of this manual.
+
+- * `/usr/local/lib/gforth/<version>/...' - Gforth `.fi' files.
++ * `/usr/lib/gforth/<version>/...' - Gforth `.fi' files.
+
+- * `/usr/local/share/gforth/<version>/TAGS' - Emacs TAGS file.
++ * `/usr/share/gforth/<version>/TAGS' - Emacs TAGS file.
+
+- * `/usr/local/share/gforth/<version>/...' - Gforth source files.
++ * `/usr/share/gforth/<version>/...' - Gforth source files.
+
+ * `.../emacs/site-lisp/gforth.el' - Emacs gforth mode.
+
+@@ -3637,7 +3637,7 @@
+ (1) Actually, there are some subtle differences - see *note The Text
+ Interpreter::.
+
+- (2) For example, `/usr/local/share/gforth...'
++ (2) For example, `/usr/share/gforth...'
+
+ 
+ File: gforth.info, Node: Review - elements of a Forth system, Next: Where to go next, Prev: Forth is written in Forth, Up: Introduction
+diff -ruN gforth-0.7.3/doc/gforth.info-2 gforth-0.7.3-patched/doc/gforth.info-2
+--- gforth-0.7.3/doc/gforth.info-2 2014-06-13 18:55:21.596773767 -0400
++++ gforth-0.7.3-patched/doc/gforth.info-2 2015-07-24 16:38:36.466931266 -0400
+@@ -6271,7 +6271,7 @@
+ (e.g., one for the Gforth sources and one for your program, *note
+ Selecting a Tags Table: (emacs)Select Tags Table.). The TAGS file for
+ the preloaded words is `$(datadir)/gforth/$(VERSION)/TAGS' (e.g.,
+-`/usr/local/share/gforth/0.2.0/TAGS'). To get the best behaviour with
++`/usr/share/gforth/0.2.0/TAGS'). To get the best behaviour with
+ `etags.fs', you should avoid putting definitions both before and after
+ `require' etc., otherwise you will see the same file visited several
+ times by commands like `tags-search'.
+@@ -6686,7 +6686,7 @@
+ just type image instead of `gforth -i image'. This works because every
+ `.fi' file starts with a line of this format:
+
+- #! /usr/local/bin/gforth-0.4.0 -i
++ #! /usr/bin/gforth-0.4.0 -i
+
+ The file and pathname for the Gforth engine specified on this line is
+ the specific Gforth executable that it was built against; i.e. the value
+@@ -6696,7 +6696,7 @@
+ You can make use of the same shell capability to make a Forth source
+ file into an executable. For example, if you place this text in a file:
+
+- #! /usr/local/bin/gforth
++ #! /usr/bin/gforth
+
+ ." Hello, world" CR
+ bye
+diff -ruN gforth-0.7.3/engine/main.c gforth-0.7.3-patched/engine/main.c
+--- gforth-0.7.3/engine/main.c 2013-10-11 17:31:28.059992157 -0400
++++ gforth-0.7.3-patched/engine/main.c 2015-07-24 16:36:42.231671688 -0400
+@@ -285,7 +285,7 @@
+
+ #ifndef STANDALONE
+ /* image file format:
+- * "#! binary-path -i\n" (e.g., "#! /usr/local/bin/gforth-0.4.0 -i\n")
++ * "#! binary-path -i\n" (e.g., "#! /usr/bin/gforth-0.4.0 -i\n")
+ * padding to a multiple of 8
+ * magic: "Gforth3x" means format 0.6,
+ * where x is a byte with
+diff -ruN gforth-0.7.3/engine/makefile.os2 gforth-0.7.3-patched/engine/makefile.os2
+--- gforth-0.7.3/engine/makefile.os2 2013-10-11 17:32:17.346584391 -0400
++++ gforth-0.7.3-patched/engine/makefile.os2 2015-07-24 16:47:16.261883095 -0400
+@@ -64,7 +64,7 @@
+ # ------------ Install directories
+
+ VPATH = .
+-prefix = /usr/local
++prefix = /usr
+ exec_prefix = ${prefix}
+ srcdir = .
+ bindir = ${exec_prefix}/bin
+diff -ruN gforth-0.7.3/filedump.fs gforth-0.7.3-patched/filedump.fs
+--- gforth-0.7.3/filedump.fs 2013-10-11 17:31:28.066992241 -0400
++++ gforth-0.7.3-patched/filedump.fs 2015-07-24 16:24:19.888463467 -0400
+@@ -1,4 +1,4 @@
+-#! /usr/local/lib/gforth/0.2.0/kernel.fi
++#! /usr/lib/gforth/0.2.0/kernel.fi
+ \ file hex dump
+
+ \ Copyright (C) 1997,2002,2003,2004,2007 Free Software Foundation, Inc.
+diff -ruN gforth-0.7.3/fixpath.fs gforth-0.7.3-patched/fixpath.fs
+--- gforth-0.7.3/fixpath.fs 2013-10-11 17:31:28.066992241 -0400
++++ gforth-0.7.3-patched/fixpath.fs 2015-07-24 16:24:32.041688325 -0400
+@@ -19,7 +19,7 @@
+
+ ." Fixing " 2 arg type ." with " 1 arg type cr
+
+-: "search s" .:/usr/local" ;
++: "search s" .:/usr" ;
+
+ include string.fs
+
+diff -ruN gforth-0.7.3/httpd.fs gforth-0.7.3-patched/httpd.fs
+--- gforth-0.7.3/httpd.fs 2013-10-11 17:31:28.070992289 -0400
++++ gforth-0.7.3-patched/httpd.fs 2015-07-24 16:24:09.921886137 -0400
+@@ -1,4 +1,4 @@
+-#! /usr/local/bin/gforth
++#! /usr/bin/gforth
+
+ \ Copyright (C) 2000,2002,2003,2004,2006,2007,2008 Free Software Foundation, Inc.
+
+diff -ruN gforth-0.7.3/INSTALL gforth-0.7.3-patched/INSTALL
+--- gforth-0.7.3/INSTALL 2013-10-11 17:31:27.998991424 -0400
++++ gforth-0.7.3-patched/INSTALL 2015-07-24 16:30:42.148538914 -0400
+@@ -85,7 +85,7 @@
+
+ configure has the following useful parameters:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+- [default: /usr/local]
++ [default: /usr]
+ --exec-prefix=PREFIX install architecture-dependent files in PREFIX
+ [default: same as prefix]
+ --help: tells you about other parameters.
+@@ -95,7 +95,7 @@
+
+ If you don't like the defaults for the installation directories, you
+ should override them already during configure. E.g., if you want to
+-install in the /gnu hierarchy instead of in the default /usr/local
++install in the /gnu hierarchy instead of in the default /usr
+ hierarchy, say
+
+ ./configure --prefix=/gnu
+@@ -168,17 +168,17 @@
+
+ If you want to have some installation-specific files loaded when
+ Gforth starts (e.g., an assembler for your processor), put commands
+-for loading them into /usr/local/share/gforth/site-forth/siteinit.fs
++for loading them into /usr/share/gforth/site-forth/siteinit.fs
+ (if the commands work for all architectures) or
+-/usr/local/lib/gforth/site-forth/siteinit.fs (for
++/usr/lib/gforth/site-forth/siteinit.fs (for
+ architecture-specific commands);
+-/usr/local/lib/gforth/site-forth/siteinit.fs takes precedence if both
++/usr/lib/gforth/site-forth/siteinit.fs takes precedence if both
+ files are present (unless you change the search path). The file names
+ given above are the defaults; if you have changed the prefix, you have
+-to replace "/usr/local" in these names with your prefix.
++to replace "/usr" in these names with your prefix.
+
+ By default, the installation procedure creates an empty
+-/usr/local/share/gforth/site-forth/siteinit.fs if there is no such
++/usr/share/gforth/site-forth/siteinit.fs if there is no such
+ file.
+
+ If you change the siteinit.fs file, you should run "make install"
+@@ -203,8 +203,8 @@
+ info files either from within Emacs (Ctrl-h i) or using the
+ stand-alone Info reader, 'info'.
+
+-If you use the default install root of '/usr/local' then the info
+-files will be installed in '/usr/local/info'.
++If you use the default install root of '/usr' then the info
++files will be installed in '/usr/info'.
+
+ Many GNU/Linux distributions are set up to put all of their
+ documentation in '/usr/info', in which case you might have to do a
+@@ -214,8 +214,8 @@
+ 1. Add an INFOPATH environment variable. The easiest place to do
+ this is '/etc/profile', right next to PATH and MANPATH:
+
+-INFOPATH=/usr/local/info:/usr/info
++INFOPATH=/usr/info:/usr/info
+
+-2. Create a file called 'dir' in 'usr/local/info'. Use the file
++2. Create a file called 'dir' in 'usr/info'. Use the file
+ '/usr/info/dir' as a template. You can add the line for gforth
+ manually, or use '/sbin/install-info' (man install-info for details).
+diff -ruN gforth-0.7.3/INSTALL.BINDIST gforth-0.7.3-patched/INSTALL.BINDIST
+--- gforth-0.7.3/INSTALL.BINDIST 2013-10-11 17:31:27.998991424 -0400
++++ gforth-0.7.3-patched/INSTALL.BINDIST 2015-07-24 16:23:44.242117997 -0400
+@@ -21,7 +21,7 @@
+ of the source distribution, and a few more, in particular the
+ executable `gforth'. The configuration options we used for creating it
+ can be seen in config.status. Basically, we use the default; among
+-other things, this means installation in the /usr/local hierarchy; if
++other things, this means installation in the /usr hierarchy; if
+ this does not suit you, "make distclean" and continue by reading
+ INSTALL.
+
+diff -ruN gforth-0.7.3/makefile.os2 gforth-0.7.3-patched/makefile.os2
+--- gforth-0.7.3/makefile.os2 2013-10-11 17:32:17.338584295 -0400
++++ gforth-0.7.3-patched/makefile.os2 2015-07-24 16:46:55.645099386 -0400
+@@ -120,7 +120,7 @@
+ # ------------ Install Directories
+
+ VPATH = .
+-prefix = /usr/local
++prefix = /usr
+ exec_prefix = ${prefix}
+ srcdir = .
+ bindir = ${exec_prefix}/bin
+diff -ruN gforth-0.7.3/mkos2mf.sed gforth-0.7.3-patched/mkos2mf.sed
+--- gforth-0.7.3/mkos2mf.sed 2013-10-11 17:31:28.086992482 -0400
++++ gforth-0.7.3-patched/mkos2mf.sed 2015-07-24 16:46:28.724939509 -0400
+@@ -28,7 +28,7 @@
+ s%@LDFLAGS@%%g
+ s%@LIBS@%-lm %g
+ s%@exec_prefix@%${prefix}%g
+-s%@prefix@%/usr/local%g
++s%@prefix@%/usr%g
+ s%@program_transform_name@%s,x,x,%g
+ s%@bindir@%${exec_prefix}/bin%g
+ s%@sbindir@%${exec_prefix}/sbin%g
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-28 11:42:28 +0000