1 files changed, 0 insertions, 105 deletions
diff --git a/libre/uboot-boundary-linux-libre/6x_bootscript b/libre/uboot-boundary-linux-libre/6x_bootscript
deleted file mode 100644
index 17d68d86c..000000000
--- a/libre/uboot-boundary-linux-libre/6x_bootscript
+++ /dev/null
@@ -1,105 +0,0 @@
-echo "checking for U-Boot upgrades..";
-setenv offset 0x400
-if load ${dtype} ${disk}:1 12000000 /boot/uboot-boundary-linux-libre/u-boot.imx; then
-  echo "  found u-boot.imx $filesize bytes)";
-  if sf probe || sf probe || sf probe 1 27000000 || sf probe 1 27000000; then
-    echo "probed SPI ROM";
-    if sf read 0x12400000 $offset $filesize; then
-      if cmp.b 0x12000000 0x12400000 $filesize; then
-        echo "  no upgrade needed";
-      else
-        echo "  need U-Boot upgrade, flashing in 5 seconds..";
-        for n in 5 4 3 2 1; do
-          echo $n;
-          sleep 1;
-        done
-        echo "  erasing flash..";
-        sf erase 0 0xC0000;
-        # two steps to prevent bricking
-        echo "  writing flash..";
-        sf write 0x12000000 $offset $filesize;
-        echo "  verifying flash..";
-        if sf read 0x12400000 $offset $filesize; then
-          if cmp.b 0x12000000 0x12400000 $filesize; then
-            echo "---- U-Boot upgraded. resetting..";
-            reset;
-          else
-            echo "  read verification error";
-          fi
-        else
-          echo "  error re-reading EEPROM";
-        fi
-      fi
-    else
-      echo "  error reading boot loader from EEPROM";
-    fi
-  else
-    echo "  error initializing EEPROM";
-  fi;
-else
-  echo "  no U-Boot image found on SD card";
-fi
-
-setenv bootargs
-setenv nextcon 0;
-
-if hdmidet ; then
-	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
-	setenv fbmem "fbmem=28M";
-	setexpr nextcon $nextcon + 1
-else
-	echo "------ no HDMI monitor";
-fi
-
-i2c dev 2
-if i2c probe 0x04 ; then
-	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
-	if test "0" -eq $nextcon; then
-		setenv fbmem "fbmem=10M";
-	else
-		setenv fbmem ${fbmem},10M
-	fi
-	setexpr nextcon $nextcon + 1
-else
-	echo "------ no Freescale display";
-fi
-
-if i2c probe 0x38 ; then
-	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
-	if test "0" -eq $nextcon; then
-		setenv fbmem "fbmem=10M";
-	else
-		setenv fbmem ${fbmem},10M
-	fi
-	setexpr nextcon $nextcon + 1
-else
-	echo "------ no 1024x600 display";
-fi
-
-if i2c probe 0x48 ; then
-	setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666
-	if test "0" -eq $nextcon; then
-		setenv fbmem "fbmem=10M";
-	else
-		setenv fbmem ${fbmem},10M
-	fi
-	setexpr nextcon $nextcon + 1
-else
-	echo "------ no 800x480 display";
-fi
-
-while test "3" -ne $nextcon ; do
-	setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
-	setexpr nextcon $nextcon + 1 ;
-done
-
-setenv bootargs $bootargs $fbmem
-
-part uuid ${dtype} ${disk}:1 uuid
-
-setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M root=PARTUUID=${uuid} rw rootwait consoleblank=0
-
-setenv fdtfile imx6q-nitrogen6x.dtb
-load ${dtype} ${disk}:1 10800000 /boot/vmlinuz-linux-libre && load ${dtype} ${disk}:1 11000000 /boot/dtbs/linux-libre/${fdtfile} && bootz 10800000 - 11000000
-
-load ${dtype} ${disk}:1 10800000 /boot/uImage-linux-libre && bootm 10800000