diff options
Diffstat (limited to 'libre/uboot-beagleboard-linux-libre-pck')
3 files changed, 0 insertions, 352 deletions
diff --git a/libre/uboot-beagleboard-linux-libre-pck/0001-parabola-arm-modifications.patch b/libre/uboot-beagleboard-linux-libre-pck/0001-parabola-arm-modifications.patch deleted file mode 100644 index 699a167f0..000000000 --- a/libre/uboot-beagleboard-linux-libre-pck/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,308 +0,0 @@ -diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c -index 7b37fbe..ff986ff 100644 ---- a/board/ti/beagle/beagle.c -+++ b/board/ti/beagle/beagle.c -@@ -56,6 +56,7 @@ - #define BBTOYS_WIFI 0x01000B00 - #define BBTOYS_VGA 0x02000B00 - #define BBTOYS_LCD 0x03000B00 -+#define BBTOYS_ULCD 0x04000B00 - #define BCT_BRETTL3 0x01000F00 - #define BCT_BRETTL4 0x02000F00 - #define LSR_COM6L_ADPT 0x01001300 -@@ -211,25 +212,25 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) - * bus 1 for the availability of an AT24C01B serial EEPROM. - * returns the device_vendor field from the EEPROM - */ --static unsigned int get_expansion_id(void) -+static unsigned int get_expansion_id(int eeprom_address) - { - i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); - - /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */ -- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) { -+ if (i2c_probe(eeprom_address) == 1) { - i2c_set_bus_num(TWL4030_I2C_BUS); - return BEAGLE_NO_EEPROM; - } - - /* read configuration data */ -- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, -+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config, - sizeof(expansion_config)); - - /* retry reading configuration data with 16bit addressing */ - if ((expansion_config.device_vendor == 0xFFFFFF00) || - (expansion_config.device_vendor == 0xFFFFFFFF)) { - printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); -- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, -+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config, - sizeof(expansion_config)); - } - -@@ -341,15 +342,18 @@ int misc_init_r(void) - case REVISION_AXBX: - printf("Beagle Rev Ax/Bx\n"); - setenv("beaglerev", "AxBx"); -+ setenv("musb", "musb_hdrc.fifo_mode=5"); - break; - case REVISION_CX: - printf("Beagle Rev C1/C2/C3\n"); - setenv("beaglerev", "Cx"); -+ setenv("musb", "musb_hdrc.fifo_mode=5"); - MUX_BEAGLE_C(); - break; - case REVISION_C4: - printf("Beagle Rev C4\n"); - setenv("beaglerev", "C4"); -+ setenv("musb", "musb_hdrc.fifo_mode=5"); - MUX_BEAGLE_C(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, -@@ -390,7 +394,7 @@ int misc_init_r(void) - generate_fake_mac = true; - } - -- switch (get_expansion_id()) { -+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) { - case TINCANTOOLS_ZIPPY: - printf("Recognized Tincantools Zippy board (rev %d %s)\n", - expansion_config.revision, -@@ -473,6 +477,30 @@ int misc_init_r(void) - if (expansion_config.content == 1) - setenv(expansion_config.env_var, expansion_config.env_setting); - -+ /* Scan 0x51 as well for loop-thru boards */ -+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) { -+ case BBTOYS_ULCD: -+ printf("Recognized BeagleBoardToys uLCD-lite board\n"); -+ setenv("buddy2", "bbtoys-ulcd"); -+ setenv("defaultdisplay", "dvi"); -+ setenv("dvimode", "800x480MR-16@60"); -+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05"); -+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0"); -+ setenv("kmsmode", "video=DVI-D-1:800x480"); -+ break; -+ case BEAGLE_NO_EEPROM: -+ printf("No EEPROM on expansion board\n"); -+ setenv("buddy2", "none"); -+ break; -+ default: -+ printf("Unrecognized expansion board: %x\n", -+ expansion_config.device_vendor); -+ setenv("buddy2", "unknown"); -+ } -+ -+ if (expansion_config.content == 1) -+ setenv(expansion_config.env_var, expansion_config.env_setting); -+ - twl4030_power_init(); - switch (get_board_revision()) { - case REVISION_XM_AB: -diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h -index f25a940..9f15cf1 100644 ---- a/include/configs/omap3_beagle.h -+++ b/include/configs/omap3_beagle.h -@@ -90,6 +90,12 @@ - #define CONFIG_USB_ETHER_MCS7830 - #define CONFIG_USB_ETHER_SMSC95XX - -+/* Parabola GNU/Linux-libre extras */ -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+#define CONFIG_SUPPORT_RAW_INITRD -+#define CONFIG_CMD_PART -+#define CONFIG_PARTITION_UUIDS -+ - /* GPIO banks */ - #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ - #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ -@@ -129,50 +135,62 @@ - /* devices */ - - #define CONFIG_EXTRA_ENV_SETTINGS \ -- "loadaddr=0x80200000\0" \ -- "rdaddr=0x81000000\0" \ -+ "loadaddr=0x82000000\0" \ -+ "rdaddr=0x88080000\0" \ - "fdt_high=0xffffffff\0" \ -- "fdtaddr=0x80f80000\0" \ -- "usbtty=cdc_acm\0" \ -- "bootfile=uImage\0" \ -- "ramdisk=ramdisk.gz\0" \ -- "bootdir=/boot\0" \ -- "bootpart=0:2\0" \ -+ "fdtaddr=0x88000000\0" \ - "console=ttyO2,115200n8\0" \ -- "mpurate=auto\0" \ -- "buddy=none\0" \ -- "optargs=\0" \ -- "camera=none\0" \ -- "vram=12M\0" \ -- "dvimode=640x480MR-16@60\0" \ -- "defaultdisplay=dvi\0" \ -+ "fdtfile=undefined\0" \ -+ "bootpart=0:1\0" \ -+ "bootdir=/\0" \ -+ "fdtdir=/dtbs/linux-libre-pck\0" \ -+ "bootfile=vmlinuz-linux-libre-pck\0" \ -+ "rdfile=initramfs-linux-libre-pck.img\0" \ - "mmcdev=0\0" \ -- "mmcroot=/dev/mmcblk0p2 rw\0" \ -- "mmcrootfstype=ext3 rootwait\0" \ -- "nandroot=ubi0:rootfs ubi.mtd=4\0" \ -- "nandrootfstype=ubifs\0" \ -- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \ -- "ramrootfstype=ext2\0" \ -+ "optargs=\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ -- "mpurate=${mpurate} " \ -- "buddy=${buddy} "\ -- "camera=${camera} "\ -- "vram=${vram} " \ -- "omapfb.mode=dvi:${dvimode} " \ -- "omapdss.def_disp=${defaultdisplay} " \ -- "root=${mmcroot} " \ -- "rootfstype=${mmcrootfstype}\0" \ -- "nandargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "mpurate=${mpurate} " \ -- "buddy=${buddy} "\ -- "camera=${camera} "\ -- "vram=${vram} " \ -- "omapfb.mode=dvi:${dvimode} " \ -- "omapdss.def_disp=${defaultdisplay} " \ -- "root=${nandroot} " \ -- "rootfstype=${nandrootfstype}\0" \ -+ "root=${root} " \ -+ "${musb} " \ -+ "${cmdline}\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=usb start;" \ -+ "for devtype in mmc usb; do " \ -+ "setenv devnum 0;" \ -+ "while ${devtype} dev ${devnum}; do " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \ -+ "part uuid ${devtype} ${rootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "setexpr devnum ${devnum} + 1;" \ -+ "done;" \ -+ "done;\0" \ - "findfdt=" \ - "if test $beaglerev = AxBx; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ -@@ -185,81 +203,11 @@ - "if test $beaglerev = xMC; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ -- "echo WARNING: Could not determine device tree to use; fi; \0" \ -- "validatefdt=" \ -- "if test $beaglerev = xMAB; then " \ -- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ -- "setenv fdtfile omap3-beagle-xm.dtb; " \ -- "fi; " \ -- "fi; \0" \ -- "bootenv=uEnv.txt\0" \ -- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -- "importbootenv=echo Importing environment from mmc ...; " \ -- "env import -t -r $loadaddr $filesize\0" \ -- "ramargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "mpurate=${mpurate} " \ -- "buddy=${buddy} "\ -- "vram=${vram} " \ -- "omapfb.mode=dvi:${dvimode} " \ -- "omapdss.def_disp=${defaultdisplay} " \ -- "root=${ramroot} " \ -- "rootfstype=${ramrootfstype}\0" \ -- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ -- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ -- "source ${loadaddr}\0" \ -- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -- "mmcboot=echo Booting from mmc ...; " \ -- "run mmcargs; " \ -- "bootm ${loadaddr}\0" \ -- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \ -- "run mmcargs; " \ -- "bootz ${loadaddr} - ${fdtaddr}\0" \ -- "nandboot=echo Booting from nand ...; " \ -- "run nandargs; " \ -- "nand read ${loadaddr} 280000 400000; " \ -- "bootm ${loadaddr}\0" \ -- "ramboot=echo Booting from ramdisk ...; " \ -- "run ramargs; " \ -- "bootm ${loadaddr}\0" \ -- "userbutton=if gpio input 173; then run userbutton_xm; " \ -- "else run userbutton_nonxm; fi;\0" \ -- "userbutton_xm=gpio input 4;\0" \ -- "userbutton_nonxm=gpio input 7;\0" --/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */ -+ "echo WARNING: Could not determine device tree to use; fi; \0" -+ - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "if run userbutton; then " \ -- "setenv bootenv uEnv.txt;" \ -- "else " \ -- "setenv bootenv user.txt;" \ -- "fi;" \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootenv; then " \ -- "echo Loaded environment from ${bootenv};" \ -- "run importbootenv;" \ -- "fi;" \ -- "if test -n $uenvcmd; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadimage; then " \ -- "run mmcboot;" \ -- "fi;" \ -- "fi; " \ -- "fi;" \ -- "run nandboot;" \ -- "setenv bootfile zImage;" \ -- "if run loadimage; then " \ -- "run loadfdt;" \ -- "run mmcbootz; " \ -- "fi; " \ -+ "run mmcboot" - - /* - * OMAP3 has 12 GP timers, they can be driven by the system clock --- -2.4.2 - diff --git a/libre/uboot-beagleboard-linux-libre-pck/PKGBUILD b/libre/uboot-beagleboard-linux-libre-pck/PKGBUILD deleted file mode 100644 index d5bfa4a10..000000000 --- a/libre/uboot-beagleboard-linux-libre-pck/PKGBUILD +++ /dev/null @@ -1,44 +0,0 @@ -# U-Boot: BeagleBoard and BeagleBoard-xM -# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org> -# Contributor: André Silva <emulatorman@parabola.nu> -# Contributor: Isaac David <isacdaavid@isacdaavid.info> - -buildarch=4 - -_pkgname=linux-libre-pck -pkgname=uboot-beagleboard-${_pkgname} -pkgver=2015.04 -pkgrel=1 -pkgdesc="U-Boot for BeagleBoard and BeagleBoard-xM (built for the linux-libre-pck kernel package)" -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -license=('GPL') -depends=('linux-libre-pck') -makedepends=('bc') -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - 'uEnv.txt') -md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd' - '4d4fd0e33ddd334a79e1e85c5b418b35' - 'd41d8cd98f00b204e9800998ecf8427e') - -prepare() { - cd u-boot-${pkgver} - patch -Np1 -i ../0001-parabola-arm-modifications.patch -} - -build() { - cd u-boot-${pkgver} - - unset LDFLAGS CFLAGS CXXFLAGS - - make distclean - make omap3_beagle_config - make -} - -package() { - cd u-boot-${pkgver} - mkdir -p "${pkgdir}/boot/${pkgname}" - cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}/boot/${pkgname}" -} diff --git a/libre/uboot-beagleboard-linux-libre-pck/uEnv.txt b/libre/uboot-beagleboard-linux-libre-pck/uEnv.txt deleted file mode 100644 index e69de29bb..000000000 --- a/libre/uboot-beagleboard-linux-libre-pck/uEnv.txt +++ /dev/null |