summaryrefslogtreecommitdiff
path: root/libre/texlive-core
diff options
context:
space:
mode:
Diffstat (limited to 'libre/texlive-core')
-rw-r--r--libre/texlive-core/09-texlive-fonts.conf9
-rw-r--r--libre/texlive-core/PKGBUILD333
-rw-r--r--libre/texlive-core/texlive-core.maps61
-rw-r--r--libre/texlive-core/texlive.install58
-rw-r--r--libre/texlive-core/texmf.cnf782
-rw-r--r--libre/texlive-core/texmfcnf.lua190
6 files changed, 1433 insertions, 0 deletions
diff --git a/libre/texlive-core/09-texlive-fonts.conf b/libre/texlive-core/09-texlive-fonts.conf
new file mode 100644
index 000000000..f870fbd7a
--- /dev/null
+++ b/libre/texlive-core/09-texlive-fonts.conf
@@ -0,0 +1,9 @@
+<?xml version="1.0"?>
+<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
+<fontconfig>
+ <dir>/usr/share/texmf-dist/fonts/opentype</dir>
+ <dir>/usr/share/texmf-dist/fonts/truetype</dir>
+ <dir>/usr/local/share/texmf/fonts/opentype</dir>
+ <dir>/usr/local/share/texmf/fonts/truetype</dir>
+</fontconfig>
+
diff --git a/libre/texlive-core/PKGBUILD b/libre/texlive-core/PKGBUILD
new file mode 100644
index 000000000..9b4556602
--- /dev/null
+++ b/libre/texlive-core/PKGBUILD
@@ -0,0 +1,333 @@
+# Maintainer (Arch): Rémy Oudompheng <remy@archlinux.org>
+# Maintainer: Michał Masłowski <mtjm@mtjm.eu>
+# Contributor: André Silva <emulatorman@parabola.nu>
+
+_pkgname=texlive-core-libre
+pkgname=texlive-core
+pkgver=2014.34872
+_revnr=${pkgver#2014.}
+pkgrel=1.parabola1
+pkgdesc="TeX Live core distribution, without nonfree add-on packages (Parabola rebranded)"
+license=('GPL')
+arch=(any)
+depends=('texlive-bin' 'perl')
+optdepends=(
+ 'dialog: for texconfig'
+ 'ghostscript: for epstopdf, epspdf and other ConTeXt tools'
+ 'java-runtime: for utilities like arara'
+ 'perl-tk: for texdoctk'
+ 'psutils: to manipulate the output of dvips'
+ 'python: for pythontex'
+ 'python2: for dviasm'
+ 'ruby: for old ConTeXT MkII and epspdf'
+ 't1utils: can be useful when installing Type1 fonts'
+)
+groups=('texlive-most')
+conflicts=('tetex' 'texlive-latex3' 'texlive-core-libre')
+provides=('tetex' 'texlive-latex3')
+replaces=('tetex' 'texlive-latex3' 'texlive-core-libre')
+url='http://tug.org/texlive/'
+mksource=("ftp://ftp.archlinux.org/other/texlive/$pkgname-$pkgver-src.zip")
+noextract=("$pkgname-$pkgver-src.zip")
+source=("https://repo.parabolagnulinux.org/other/$_pkgname/$_pkgname-$pkgver-src.tar.xz"
+ "$pkgname.maps"
+ "texmf.cnf"
+ "texmfcnf.lua"
+ "09-texlive-fonts.conf")
+install=texlive.install
+backup=(etc/texmf/web2c/texmf.cnf \
+ etc/texmf/chktex/chktexrc \
+ etc/texmf/dvipdfmx/dvipdfmx.cfg \
+ etc/texmf/dvips/config/config.ps \
+ etc/texmf/tex/generic/config/language.dat \
+ etc/texmf/tex/generic/config/language.def \
+ etc/texmf/tex/generic/config/pdftexconfig.tex \
+ etc/texmf/ttf2pk/ttf2pk.cfg \
+ etc/texmf/web2c/fmtutil.cnf \
+ etc/texmf/web2c/mktex.cnf \
+ etc/texmf/xdvi/XDvi)
+mkmd5sums=('65e63bdefdc909b9d6e6624924e53feb')
+md5sums=('016626916175b074e98b6f1aa9fa9ff7'
+ '75c813acb5df57d174e4bd07019adf34'
+ 'd5a3f442ec3b7aa1518170f64f9d006b'
+ '16ad4dc53deb00029baef1b01ba1d984'
+ '393a4bf67adc7ca5df2b386759d1a637')
+
+mksource() {
+ mkdir $pkgname-$pkgver
+ pushd $pkgname-$pkgver
+ bsdtar xfv ../$pkgname-$pkgver-src.zip
+
+ # remove nonfree packages
+ # MeX licensed packages.
+ rm -v {cc-pl,cs,ec,mex,pl}.tar.xz
+ # Public domain, will be relicensed.
+ rm -v context-{account,algorithmic,fixme,games,letter,ruby}.tar.xz
+ # No specific free license.
+ rm -v euro-ce.tar.xz
+ # Remove their references from package list.
+ sed -ri '/^(cc-pl|cs|ec|mex|pl|context-(account|algorithmic|fixme|games|letter|ruby)|euro-ce) /d' CONTENTS
+
+ popd
+}
+
+build() {
+ cd $srcdir/$pkgname-$pkgver
+ echo -n " --> extracting all packages... "
+ for p in *.tar.xz; do
+ bsdtar -xf $p
+ done
+ echo "done"
+ rm -rf source doc
+
+ # remove nonfree packages references from updmap.cfg
+ sed -i '/ccpl.map/d' texmf-dist/web2c/updmap.cfg
+ sed -i '/cs-charter.map/d' texmf-dist/web2c/updmap.cfg
+ sed -i '/csfonts.map/d' texmf-dist/web2c/updmap.cfg
+ sed -i '/plother.map/d' texmf-dist/web2c/updmap.cfg
+ sed -i '/pltext.map/d' texmf-dist/web2c/updmap.cfg
+
+ # remove nonfree packages references from texlive-core.maps
+ sed -i '/ccpl.map/d' $srcdir/$pkgname.maps
+ sed -i '/cs-charter.map/d' $srcdir/$pkgname.maps
+ sed -i '/csfonts.map/d' $srcdir/$pkgname.maps
+ sed -i '/plother.map/d' $srcdir/$pkgname.maps
+ sed -i '/pltext.map/d' $srcdir/$pkgname.maps
+
+ # remove nonfree packages references from fmtutil.cnf
+ sed -i '/cslatex/d' texmf-dist/web2c/fmtutil.cnf
+ sed -i '/csplain/d' texmf-dist/web2c/fmtutil.cnf
+ sed -i '/from mex/d' texmf-dist/web2c/fmtutil.cnf
+ sed -i '/mexconf.tex/d' texmf-dist/web2c/fmtutil.cnf
+}
+
+package() {
+ cd $srcdir/$pkgname-$pkgver
+ # Install packages.
+ install -m755 -d $pkgdir/var/lib/texmf/arch/installedpkgs
+ sed -i '/^#/d' CONTENTS
+ install -m644 CONTENTS $pkgdir/var/lib/texmf/arch/installedpkgs/${pkgname}_${_revnr}.pkgs
+ install -m644 $srcdir/$pkgname.maps $pkgdir/var/lib/texmf/arch/installedpkgs/
+ install -m755 -d $pkgdir/usr/share
+ wanteddirs=$(for d in *; do test -d $d && [[ $d != texmf* ]] && echo $d; done) || true
+ for dir in $wanteddirs; do
+ find $dir -type d -exec install -d -m755 $pkgdir/usr/share/texmf-dist/'{}' \;
+ find $dir -type f -exec install -m644 '{}' $pkgdir/usr/share/texmf-dist/'{}' \;
+ done
+ find texmf-dist -type d -exec install -d -m755 $pkgdir/usr/share/'{}' \;
+ find texmf-dist -type f -exec install -m644 '{}' $pkgdir/usr/share/'{}' \;
+ find texmf-dist -type f -executable -exec chmod 755 $pkgdir/usr/share/'{}' \;
+
+ #############################################################
+ ### install texmf tree
+ echo "--> installing the /etc/texmf tree"
+ install -d -m755 "$pkgdir"/etc/texmf/web2c
+ install -d -m755 "$pkgdir"/etc/texmf/chktex
+ install -d -m755 "$pkgdir"/etc/texmf/dvips/config
+ install -d -m755 "$pkgdir"/etc/texmf/dvipdfmx
+ install -d -m755 "$pkgdir"/etc/texmf/tex/generic/config
+ install -d -m755 "$pkgdir"/etc/texmf/ttf2pk
+ install -d -m755 "$pkgdir"/etc/texmf/xdvi
+ install -d -m755 "$pkgdir"/etc/fonts/conf.avail
+ install -m644 "$srcdir"/09-texlive-fonts.conf "$pkgdir"/etc/fonts/conf.avail/
+
+ # Remove manpages (already in texlive-bin).
+ rm -rf "$pkgdir"/usr/share/texmf-dist/doc/man
+
+ # copy config files to $TEXMFCONFIG tree
+ cp -a "$pkgdir"/usr/share/texmf-dist/chktex/chktexrc \
+ "$pkgdir"/etc/texmf/chktex/
+ cp -a "$pkgdir"/usr/share/texmf-dist/web2c/mktex.cnf \
+ "$pkgdir"/etc/texmf/web2c/
+ cp -a "$pkgdir"/usr/share/texmf-dist/web2c/updmap.cfg \
+ "$pkgdir"/etc/texmf/web2c/
+ cp -a "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil.cnf \
+ "$pkgdir"/etc/texmf/web2c/
+ cp -a "$pkgdir"/usr/share/texmf-dist/dvips/config/config.ps \
+ "$pkgdir"/etc/texmf/dvips/config/
+ cp -a "$pkgdir"/usr/share/texmf-dist/dvipdfmx/dvipdfmx.cfg \
+ "$pkgdir"/etc/texmf/dvipdfmx/
+ cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/pdftexconfig.tex \
+ "$pkgdir"/etc/texmf/tex/generic/config/
+ cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.dat \
+ "$pkgdir"/etc/texmf/tex/generic/config/
+ cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.def \
+ "$pkgdir"/etc/texmf/tex/generic/config/
+ cp -a "$pkgdir"/usr/share/texmf-dist/ttf2pk/ttf2pk.cfg \
+ "$pkgdir"/etc/texmf/ttf2pk/
+ cp -a "$pkgdir"/usr/share/texmf-dist/xdvi/XDvi \
+ "$pkgdir"/etc/texmf/xdvi/
+ # remove TL specific warnings in the language.{dat,def} files:
+ sed -i -e '/DO NOT EDIT/,+3 d' "$pkgdir"/etc/texmf/tex/generic/config/language.*
+ # clean updmap.cfg
+ sed -i '/^\(Map\|MixedMap\)/d' "$pkgdir"/etc/texmf/web2c/updmap.cfg
+ sed -i '/^#! \(Map\|MixedMap\)/d' "$pkgdir"/etc/texmf/web2c/updmap.cfg
+
+
+ # replace upstream texmf.cnf with ours
+ rm -f "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf
+ install -m644 "$srcdir"/texmf.cnf "$pkgdir"/etc/texmf/web2c/texmf.cnf
+ # since the location of texmf.cnf is hard-wired to be under /usr/share/texmf/web2c
+ # we make a symlink from /etc/texmf/web2c/texmf.cnf to the latter
+ ln -sf /etc/texmf/web2c/texmf.cnf "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf
+ # replace upstream texmfcnf.lua with ours
+ install -m644 "$srcdir"/texmfcnf.lua "$pkgdir"/usr/share/texmf-dist/web2c/texmfcnf.lua
+ ## remove aleph from fmtutil.cnf
+ sed -i -e '/aleph/d' "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil.cnf
+
+ # create symlinks for formats
+ echo "--> Create symlinks for TeX formats ..."
+ mkdir -p "${pkgdir}/usr/bin"
+ bash "${pkgdir}"/usr/share/texmf-dist/scripts/texlive/texlinks.sh -f "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil.cnf "$pkgdir"/usr/bin/
+
+ # use python2 instead of python for scripts.
+ sed -i '1s/python/python2/' $pkgdir/usr/share/texmf-dist/scripts/de-macro/de-macro
+ sed -i 's/env python/env python2/' $pkgdir/usr/share/texmf-dist/scripts/dviasm/dviasm.py
+
+ # install Perl libraries
+ mv "$pkgdir"/usr/share/texmf-dist/tlpkg "$pkgdir"/usr/share
+ rm -rf "$pkgdir"/usr/share/tlpkg/tlpobj
+
+ # copy config file to texmf-config
+ #mkdir -p $pkgdir/etc/texmf/tex/context/config
+ #cp -a $pkgdir/usr/share/texmf-dist/tex/context/config/cont-usr.tex \
+ # $pkgdir/etc/texmf/tex/context/config/cont-usr.tex
+
+ # remove obsolete stuff (we don't provide the omega and aleph binaries anyway)
+ rm -f $pkgdir/usr/share/texmf-dist/tex/plain/config/{omega,aleph}.ini
+ #sed -i '/cherokee\.map/d; /oinuit\.map/d; /omega\.map/d' \
+ # "${pkgdir}/usr/share/texmf-dist/web2c/updmap.cfg"
+
+ # remove upstream updmap.cfg: it contains too many maps.
+ rm "${pkgdir}/usr/share/texmf-dist/web2c/updmap.cfg"
+
+ # more cleanup
+ rm -rf $pkgdir/usr/share/texmf-dist/scripts/context/stubs/mswin/
+
+ # link programs from /usr/share/texmf-dist/scripts
+ _linked_scripts="
+a2ping/a2ping.pl
+accfonts/mkt1font
+accfonts/vpl2ovp
+accfonts/vpl2vpl
+adhocfilelist/adhocfilelist.sh
+arara/arara.sh
+bundledoc/arlatex
+bundledoc/bundledoc
+checkcites/checkcites.lua
+chktex/chkweb.sh
+chktex/deweb.pl
+context/perl/mptopdf.pl
+context/stubs/unix/context
+context/stubs/unix/contextjit
+context/stubs/unix/ctxtools
+context/stubs/unix/luatools
+context/stubs/unix/mtxrun
+context/stubs/unix/mtxrunjit
+context/stubs/unix/pstopdf
+context/stubs/unix/texexec
+context/stubs/unix/texmfstart
+ctanify/ctanify
+ctanupload/ctanupload.pl
+de-macro/de-macro
+dosepsbin/dosepsbin.pl
+dtxgen/dtxgen
+dviasm/dviasm.py
+epstopdf/epstopdf.pl
+findhyph/findhyph
+fontools/afm2afm
+fontools/autoinst
+fontools/ot2kpx
+fragmaster/fragmaster.pl
+installfont/installfont-tl
+latex-git-log/latex-git-log
+latex2man/latex2man
+latexdiff/latexdiff-vc.pl
+latexdiff/latexdiff.pl
+latexdiff/latexrevise.pl
+latexfileversion/latexfileversion
+latexindent/latexindent.pl
+latexmk/latexmk.pl
+latexpand/latexpand
+ltxfileinfo/ltxfileinfo
+ltximg/ltximg.pl
+lua2dox/lua2dox_filter
+luaotfload/luaotfload-tool.lua
+match_parens/match_parens
+mf2pt1/mf2pt1.pl
+mkjobtexmf/mkjobtexmf.pl
+oberdiek/pdfatfi.pl
+pdfcrop/pdfcrop.pl
+pdfjam/pdf180
+pdfjam/pdf270
+pdfjam/pdf90
+pdfjam/pdfbook
+pdfjam/pdfflip
+pdfjam/pdfjam
+pdfjam/pdfjam-pocketmod
+pdfjam/pdfjam-slides3up
+pdfjam/pdfjam-slides6up
+pdfjam/pdfjoin
+pdfjam/pdfnup
+pdfjam/pdfpun
+pfarrei/a5toa4.tlu
+pfarrei/pfarrei.tlu
+pkfix-helper/pkfix-helper
+pkfix/pkfix.pl
+ps2eps/ps2eps.pl
+purifyeps/purifyeps
+pythontex/pythontex.py
+pythontex/depythontex.py
+simpdftex/simpdftex
+sty2dtx/sty2dtx.pl
+texcount/texcount.pl
+texdef/texdef.pl
+texdiff/texdiff
+texdirflatten/texdirflatten
+texdoc/texdoc.tlu
+texdoctk/texdoctk.pl
+texfot/texfot.pl
+texlive/allcm.sh
+texlive/allneeded.sh
+texlive/dvi2fax.sh
+texlive/dvired.sh
+texlive/e2pall.sh
+texlive/fmtutil-sys.sh
+texlive/fmtutil.sh
+texlive/fontinst.sh
+texlive/kpsetool.sh
+texlive/kpsewhere.sh
+texlive/ps2frag.sh
+texlive/pslatex.sh
+texlive/rungs.tlu
+texlive/texconfig-dialog.sh
+texlive/texconfig-sys.sh
+texlive/texconfig.sh
+texlive/texlinks.sh
+texlive/updmap-sys.sh
+texlive/updmap.pl
+texliveonfly/texliveonfly.py
+texloganalyser/texloganalyser
+thumbpdf/thumbpdf.pl
+typeoutfileinfo/typeoutfileinfo.sh
+xindy/texindy.pl
+xindy/xindy.pl
+"
+ install -m755 -d $pkgdir/usr/bin
+ for _script in ${_linked_scripts}; do
+ _scriptbase=$(basename $_script)
+ _scriptbase=${_scriptbase%.*}
+ [[ -f ${pkgdir}/usr/share/texmf-dist/scripts/${_script} ]] &&
+ ln -s /usr/share/texmf-dist/scripts/${_script} ${pkgdir}/usr/bin/${_scriptbase}
+ done
+ ln -s /usr/share/texmf-dist/scripts/listings-ext/listings-ext.sh ${pkgdir}/usr/bin/listings-ext.sh
+
+ # additional symlinks
+ ln -s allcm ${pkgdir}/usr/bin/allec
+ ln -s fmtutil ${pkgdir}/usr/bin/mktexfmt
+ ln -s kpsetool ${pkgdir}/usr/bin/kpsexpand
+ ln -s kpsetool ${pkgdir}/usr/bin/kpsepath
+ ln -s epstopdf ${pkgdir}/usr/bin/repstopdf
+ ln -s pdfcrop ${pkgdir}/usr/bin/rpdfcrop
+ ln -s luaotfload-tool ${pkgdir}/usr/bin/mkluatexfontdb
+}
diff --git a/libre/texlive-core/texlive-core.maps b/libre/texlive-core/texlive-core.maps
new file mode 100644
index 000000000..8cb9a9689
--- /dev/null
+++ b/libre/texlive-core/texlive-core.maps
@@ -0,0 +1,61 @@
+Map euler.map
+Map charter.map
+Map cs-charter.map
+Map csfonts.map
+Map dummy-space.map
+Map fpls.map
+Map garuda-c90.map
+Map l7x-urwvn.map
+Map lm.map
+Map marvosym.map
+Map mathpple.map
+Map norasi-c90.map
+Map original-context-symbol.map
+Map pazo.map
+Map pxfonts.map
+Map qag.map
+Map qbk.map
+Map qcr.map
+Map qcs.map
+Map qhv.map
+Map qpl.map
+Map qtm.map
+Map qzc.map
+Map tabvar.map
+Map troff-updmap.map
+Map txfonts.map
+Map uag.map
+Map ubk.map
+Map ucr.map
+Map uhv.map
+Map unc.map
+Map upl.map
+Map usy.map
+Map utm.map
+Map utopia.map
+Map uzc.map
+Map uzd.map
+MixedMap arss.map
+MixedMap artm.map
+MixedMap ccpl.map
+MixedMap cm-super-t1.map
+MixedMap cm-super-t2a.map
+MixedMap cm-super-t2b.map
+MixedMap cm-super-t2c.map
+MixedMap cm-super-ts1.map
+MixedMap cm-super-x2.map
+MixedMap cm.map
+MixedMap cmextra.map
+MixedMap cmtext-bsr-interpolated.map
+MixedMap cyrillic.map
+MixedMap eurosym.map
+MixedMap latxfont.map
+MixedMap mflogo.map
+MixedMap plother.map
+MixedMap pltext.map
+MixedMap rsfs.map
+MixedMap stmaryrd.map
+MixedMap symbols.map
+MixedMap tipa.map
+MixedMap wasy.map
+MixedMap yhmath.map
diff --git a/libre/texlive-core/texlive.install b/libre/texlive-core/texlive.install
new file mode 100644
index 000000000..77d4213be
--- /dev/null
+++ b/libre/texlive-core/texlive.install
@@ -0,0 +1,58 @@
+PKGNAME="texlive-core"
+UPDMAP="etc/texmf/web2c/updmap.cfg"
+UPDMAPLOCAL="etc/texmf/web2c/updmap-local.cfg"
+SYNCWITHTREES=''
+
+MAPFILE="var/lib/texmf/arch/installedpkgs/$PKGNAME.maps"
+
+post_install() {
+ TMPFILE=`mktemp`
+ echo ">>> texlive: saving updmap.cfg as $TMPFILE..."
+ cp "$UPDMAP" "$TMPFILE"
+ echo ">>> texlive: regenerating updmap.cfg (custom additions should go"
+ echo " into /etc/texmf/web2c/updmap-local.cfg"
+ cp usr/share/texmf-dist/web2c/updmap-hdr.cfg $UPDMAP
+ cat var/lib/texmf/arch/installedpkgs/*.maps >> $UPDMAP
+ [ -f "$UPDMAPLOCAL" ] && cat "$UPDMAPLOCAL" >> $UPDMAP
+ echo ">>> texlive: updating the filename database..."
+ usr/bin/mktexlsr
+ echo ">>> texlive: updating the fontmap files with updmap..."
+ usr/bin/updmap-sys --quiet --nohash
+ echo " done."
+ echo -n "creating all formats..."
+ usr/bin/fmtutil-sys --all 1>/dev/null
+ echo " done."
+ echo " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)"
+ echo "NB: To setup ConTeXt and the lua(la)tex font db,"
+ echo " see http://wiki.archlinux.org/index.php/TeX_Live"
+}
+
+post_upgrade() {
+ TMPFILE=`mktemp`
+ echo ">>> texlive: saving updmap.cfg as $TMPFILE..."
+ cp "$UPDMAP" "$TMPFILE"
+ echo ">>> texlive: regenerating updmap.cfg (custom additions should go"
+ echo " into /etc/texmf/web2c/updmap-local.cfg"
+ cp usr/share/texmf-dist/web2c/updmap-hdr.cfg $UPDMAP
+ cat var/lib/texmf/arch/installedpkgs/*.maps >> $UPDMAP
+ [ -f "$UPDMAPLOCAL" ] && cat "$UPDMAPLOCAL" >> $UPDMAP
+ echo ">>> texlive: updating the filename database..."
+ usr/bin/mktexlsr
+ echo ">>> texlive: updating the fontmap files with updmap..."
+ usr/bin/updmap-sys --quiet --nohash $SYNCWITHTREES
+ echo " done."
+ echo ">>> texlive: recreating all formats..."
+ usr/bin/fmtutil-sys --all 1>/dev/null
+ echo " done."
+ echo " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)"
+ echo "NB: To setup ConTeXt and the lua(la)tex font db,"
+ echo " see http://wiki.archlinux.org/index.php/TeX_Live"
+ if [[ "$2" == 200* ]]; then
+ echo "Important note. Some directories have moved:"
+ echo " \$TEXMFSYSVAR is now /var/lib/texmf (previously /usr/share/texmf-var)"
+ echo " \$TEXMFSYSCONFIG is now /etc/texmf (previously /usr/share/texmf-config)"
+ echo "Please move and update the config files you had modified and delete the rest."
+ echo "(Note however that updmap.cfg has been automatically copied and updated.)"
+ fi
+}
+
diff --git a/libre/texlive-core/texmf.cnf b/libre/texlive-core/texmf.cnf
new file mode 100644
index 000000000..c96c20e39
--- /dev/null
+++ b/libre/texlive-core/texmf.cnf
@@ -0,0 +1,782 @@
+% texmf.cnf for TeXLive/Parabola GNU/Linux-libre -- runtime path configuration file for kpathsea.
+% Public domain.
+%
+% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
+% updated. Instead, put your changes -- and only your changes, not an
+% entire copy! -- in ../../texmf.cnf. That is, if this file is
+% installed in /some/path/to/texlive/2013/texmf-dist/web2c/texmf.cnf,
+% add your custom settings to /some/path/to/texlive/2013/texmf.cnf.
+%
+% What follows is a super-summary of what this .cnf file can
+% contain. Please read the Kpathsea manual for more information.
+%
+% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
+% The `=' (and surrounding spaces) is optional.
+% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
+% Long lines can be continued with a \.
+%
+% Earlier entries (in the same or another file) override later ones, and
+% an environment variable foo overrides any texmf.cnf definition of foo.
+%
+% All definitions are read before anything is expanded, so you can use
+% variables before they are defined.
+%
+% If a variable assignment is qualified with `.PROGRAM', it is ignored
+% unless the current executable (last filename component of argv[0]) is
+% named PROGRAM. This foo.PROGRAM construct is not recognized on the
+% right-hand side. For environment variables, use FOO_PROGRAM.
+%
+% Which file formats use which paths for searches is described in the
+% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
+%
+% // means to search subdirectories (recursively).
+% A leading !! means to look only in the ls-R db, never on the disk.
+% In this file, either ; or : can be used to separate path components.
+% A leading/trailing/doubled path separator in the paths will be
+% expanded into the compile-time default. Probably not what you want.
+%
+% Brace notation is supported, for example: /usr/local/{mytex,othertex}
+% expands to /usr/local/mytex:/usr/local/othertex. We make extensive
+% use of this.
+
+
+% Part 1: Search paths and directories.
+
+% This is the parent directory of our several trees, i.e.,
+% /usr/local/texlive/YYYY in the original TeX Live distribution.
+%
+% All trees must be organized according to the TeX Directory Structure
+% (http://tug.org/tds), or files may not be found.
+%
+% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
+% Kpathsea sets SELFAUTOLOC (the directory with the binary),
+% SELFAUTODIR (its parent), and SELFAUTOPARENT (its grandparent).
+TEXMFROOT = $SELFAUTODIR/share
+
+% The main tree of distributed packages and programs:
+TEXMFDIST = $TEXMFROOT/texmf-dist
+
+% We used to have a separate /texmf tree with some core programs and files.
+% Keep the variable name.
+TEXMFMAIN = $TEXMFDIST
+
+% Local additions to the distribution trees.
+TEXMFLOCAL = /usr/local/share/texmf;/usr/share/texmf
+
+% TEXMFSYSVAR, where *-sys store cached runtime data.
+TEXMFSYSVAR = /var/lib/texmf
+
+% TEXMFSYSCONFIG, where *-sys store configuration data.
+TEXMFSYSCONFIG = /etc/texmf
+
+% Per-user texmf tree(s) -- organized per the TDS, as usual. To define
+% more than one per-user tree, set this to a list of directories in
+% braces, as described above. (This used to be HOMETEXMF.) ~ expands
+% to %USERPROFILE% on Windows, $HOME otherwise.
+TEXMFHOME = ~/texmf
+
+% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
+TEXMFVAR = ~/.texlive/texmf-var
+
+% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
+TEXMFCONFIG = ~/.texlive/texmf-config
+
+% List all the texmf trees. For an explanation of what they are, see the
+% TeX Live manual.
+%
+% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
+% explicitly and before all other trees.
+%
+% TEXMFLOCAL precedes TEXMFDIST because locally-installed versions
+% should take precedence over distribution files -- although it is
+% generally a source of confusion to have different versions of a
+% package installed, whatever the trees, so try to avoid it.
+TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFLOCAL,!!$TEXMFDIST}
+
+% Where to look for ls-R files. There need not be an ls-R in the
+% directories in this path, but if there is one, Kpathsea will use it.
+% By default, this is only the !! elements of TEXMF, so that mktexlsr
+% does not create ls-R files in the non-!! elements -- because if an
+% ls-R is present, it will be used, and the disk will not be searched.
+% This is arguably a bug in kpathsea.
+TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFLOCAL,!!$TEXMFDIST}
+
+% The system trees. These are the trees that are shared by all users.
+% If a tree appears in this list, the mktex* scripts will use
+% VARTEXFONTS for generated files, if the original tree isn't writable;
+% otherwise the current working directory is used.
+SYSTEXMF = $TEXMFSYSVAR;$TEXMFLOCAL;$TEXMFDIST
+
+% First writable tree here is used by Lua(La)TeX for the font cache.
+% LuaLaTeX uses the value here, while ConTeXt uses the same variable but
+% from texmfcnf.lua; therefore the two values should be kept in sync.
+% (As should everything else in texmf.cnf <-> texmfcnf.lua.)
+TEXMFCACHE = $TEXMFSYSVAR;$TEXMFVAR
+
+% Where generated fonts may be written. This tree is used when the sources
+% were found in a system tree and either that tree wasn't writable, or the
+% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
+VARTEXFONTS = $TEXMFVAR/fonts
+
+% On some systems, there will be a system tree which contains all the font
+% files that may be created as well as the formats. For example
+% TEXMFVAR = /var/lib/texmf
+% is used in many distros. In this case, set VARTEXFONTS like this
+%VARTEXFONTS = $TEXMFVAR/fonts
+% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
+%
+% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
+% one of the TEXMF directories (avoids overlapping ls-R files).
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Usually you will not need to edit any of the following variables.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% WEB2C is for Web2C specific files. The current directory may not be
+% a good place to look for them.
+WEB2C = $TEXMF/web2c
+
+% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
+% or \openin, including .sty, .eps, etc. We specify paths for all known
+% formats, past or present. Not all of them are built these days.
+
+% Plain TeX. Have the command tex check all directories as a last
+% resort, we may have plain-compatible stuff anywhere.
+TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
+
+% Fontinst needs to read afm files.
+TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}//
+
+% Other plain-based formats.
+TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}//
+TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
+TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+
+% LaTeX 2e specific macros are stored in latex/, macros that can only be
+% used with 2.09 in latex209/. In addition, we look in the directory
+% latex209, useful for macros that were written for 2.09 and do not
+% mention 2e at all, but can be used with 2e.
+TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//
+TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}//
+
+% MLTeX.
+TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}//
+TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}//
+
+% e-TeX.
+TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfTeX.
+TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
+TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}//
+
+% pdfeTeX.
+TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfxTeX.
+TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}//
+
+% LuaTeX.
+TEXINPUTS.lualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.luatex = .;$TEXMF/tex/{luatex,plain,generic,}//
+TEXINPUTS.dvilualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.dviluatex = .;$TEXMF/tex/{luatex,plain,generic,}//
+
+% XeTeX.
+TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}//
+TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}//
+TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}//
+
+% Omega / Aleph.
+TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.lamed = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
+
+% p(La)TeX.
+TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEXINPUTS.platex = .;$TEXMF/tex/{platex,latex,generic,}//
+
+% epTeX, and for pmpost.
+TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEX.pmpost = eptex
+
+% (e)up(La)TeX.
+TEXINPUTS.uplatex = .;$TEXMF/tex/{uplatex,platex,latex,generic,}//
+TEXINPUTS.uptex = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
+TEXINPUTS.euptex = .;$TEXMF/tex/{uptex,ptex,plain,generic}//
+
+% pBibTeX bibliographies and style files.
+BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib//
+BSTINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bst//
+
+% ConTeXt.
+TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic}//
+
+% jadetex.
+TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
+TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
+
+% XMLTeX.
+TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
+TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
+
+% Miscellany, no longer built.
+TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}//
+TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
+TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}//
+
+% Earlier entries override later ones, so put this generic one last.
+TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}//
+
+% ttf2tfm.
+TTF2TFMINPUTS = .;$TEXMF/ttf2pk//
+
+% Metafont, MetaPost inputs.
+MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
+MPINPUTS = .;$TEXMF/metapost//
+
+% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
+% We want to find the engine-specific file, e.g., cont-en.fmt can
+% exist under both pdftex/ and xetex/. But just in case some formats
+% end up without an engine directory, look directly in web2c/ too.
+% We repeat the same definition three times because of the way fmtutil
+% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
+% will not be found.
+TEXFORMATS = .;$TEXMF/web2c{/$engine,}
+MFBASES = .;$TEXMF/web2c{/$engine,}
+MPMEMS = .;$TEXMF/web2c{/$engine,}
+%
+% As of 2008, pool files don't exist any more (the strings are compiled
+% into the binaries), but just in case something expects to find these:
+TEXPOOL = .;$TEXMF/web2c
+MFPOOL = ${TEXPOOL}
+MPPOOL = ${TEXPOOL}
+
+% support the original xdvi. Must come before the generic settings.
+PKFONTS.XDvi = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
+VFFONTS.XDvi = .;$TEXMF/%s
+PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
+TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}//
+
+% Device-independent font metric files.
+VFFONTS = .;$TEXMF/fonts/vf//
+TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
+
+% The $MAKETEX_MODE below means the drivers will not use a cx font when
+% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init
+% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual.
+% The modeless part guarantees that bitmaps for PostScript fonts are found.
+PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
+
+% Similarly for the GF format, which only remains in existence because
+% Metafont outputs it (and MF isn't going to change).
+GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
+
+% A backup for PKFONTS and GFFONTS. Not used for anything.
+GLYPHFONTS = .;$TEXMF/fonts
+
+% A place to puth everything that doesn't fit the other font categories.
+MISCFONTS = .;$TEXMF/fonts/misc//
+
+% font name map files. This isn't just fonts/map// because ConTeXt
+% wants support for having files with the same name in the different
+% subdirs. Maybe if the programs ever get unified to accepting the same
+% map file syntax the definition can be simplified again.
+TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
+
+% BibTeX bibliographies and style files. bibtex8 also uses these.
+BIBINPUTS = .;$TEXMF/bibtex/bib//
+BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
+
+% MlBibTeX.
+MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
+MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
+
+% .ris and .bltxml bibliography formats.
+RISINPUTS = .;$TEXMF/bibtex/ris//
+BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml//
+
+% MFT style files.
+MFTINPUTS = .;$TEXMF/mft//
+
+% PostScript headers and prologues (.pro); unfortunately, some programs
+% also use this for acessing font files (enc, type1, truetype)
+TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
+TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
+
+% OSFONTDIR is to provide a convenient hook for allowing TeX to find
+% fonts installed on the system (outside of TeX). An empty default
+% value would add "//" to the search paths, so we give it a dummy value.
+% OSFONTDIR = /usr/share/fonts
+
+% PostScript Type 1 outline fonts.
+T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
+
+% PostScript AFM metric files.
+AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
+
+% TrueType outline fonts.
+TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR//
+
+% OpenType outline fonts.
+OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR//
+
+% Type 42 outline fonts.
+T42FONTS = .;$TEXMF/fonts/type42//
+
+% Ligature definition files.
+LIGFONTS = .;$TEXMF/fonts/lig//
+
+% Dvips' config.* files (this name should not start with `TEX'!).
+TEXCONFIG = $TEXMF/dvips//
+
+% Makeindex style (.ist) files.
+INDEXSTYLE = .;$TEXMF/makeindex//
+
+% Font encoding files (.enc).
+ENCFONTS = .;$TEXMF/fonts/enc//
+
+% CMap files.
+CMAPFONTS = .;$TEXMF/fonts/cmap//
+
+% Subfont definition files.
+SFDFONTS = .;$TEXMF/fonts/sfd//
+
+% OpenType feature files (.fea).
+FONTFEATURES=.;$TEXMF/fonts/fea//
+
+% .cid and .cidmap
+FONTCIDMAPS=.;$TEXMF/fonts/cid//
+
+% pdftex config files:
+PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
+
+% Used by DMP (ditroff-to-mpx), called by makempx -troff.
+TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps
+MPSUPPORT = .;$TEXMF/metapost/support
+
+% For xdvi to find mime.types and .mailcap, if they do not exist in
+% ~. These are single directories, not paths.
+% (But the default mime.types, at least, may well suffice.)
+MIMELIBDIR = /etc
+MAILCAPLIBDIR = /etc
+
+% Default settings for the fontconfig library as used by the Windows
+% versions of xetex/xdvipdfmx. Not used by xetex on Unixish systems.
+% ConTeXT MkIV (all platforms) also use these values.
+%
+FONTCONFIG_FILE = fonts.conf
+FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf
+FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache
+
+% TeX documentation and source files, for use with texdoc and kpsewhich.
+TEXDOCS = $TEXMF/doc//
+TEXSOURCES = .;$TEXMF/source//
+
+% Web and CWeb input paths.
+WEBINPUTS = .;$TEXMF/web//
+CWEBINPUTS = .;$TEXMF/cweb//
+
+% Omega-related fonts and other files.
+OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
+OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
+OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
+OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
+OTPINPUTS = .;$TEXMF/omega/otp//
+OCPINPUTS = .;$TEXMF/omega/ocp//
+
+% Some additional input variables for several programs. If you add
+% a program that uses the `other text files' or `other binary files'
+% search formats, you'll want to add their variables here as well.
+T4HTINPUTS = .;$TEXMF/tex4ht//
+
+%% t4ht utility, sharing files with TeX4ht
+TEX4HTFONTSET=alias,iso8859,unicode
+TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
+
+% TeXworks editor configuration and settings
+TW_LIBPATH = $TEXMFCONFIG/texworks
+TW_INIPATH = $TW_LIBPATH
+
+% For security, do not look in . for dvipdfmx.cfg, since the D option
+% would allow command execution.
+DVIPDFMXINPUTS = $TEXMF/dvipdfmx
+
+% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
+%
+% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in
+% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended
+% default expansion of TEXINPUTS will not happen and .lua files under
+% the /tex/ will not be found.
+%
+% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex.
+% The default LUAINPUTS suffices for luatex and dviluatex.
+%
+LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}//
+
+% Lua needs to look for binary lua libraries distributed with packages.
+CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
+
+% Architecture independent executables.
+TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}//
+
+% Other languages.
+JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java//
+PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl//
+PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
+RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
+
+
+%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
+% KPSE_DOT = .
+
+% This definition isn't used from this .cnf file itself (that would be
+% paradoxical), but the compile-time default in paths.h is built from it.
+% The SELFAUTO* variables are set automatically from the location of
+% argv[0], in kpse_set_program_name.
+%
+% This main texmf.cnf file is installed, for a release YYYY, in a
+% directory such as /usr/local/texlive/YYYY/texmf-dist/web2c/texmf.cnf.
+% Since this file is subject to future updates, the TeX Live installer
+% or human administrator may also create a file
+% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
+% will take precedence over the distributed one.
+%
+% For security reasons, it is best not to include . in this path.
+%
+% The idea behind this lengthy definition: for each of
+% SELFAUTO{LOC,DIR,PARENT}, look in the directory,
+% then the subdirectories share/texmf-local, share/texmf-dist, share/texmf,
+% then the subdirectories ./texmf-local, texmf-dist, ./texmf.
+% At any given installation, most of these directories will not exist,
+% but they all turn out to be useful somewhere.
+%
+% Special addition -- we want to include one more directory: the
+% great-grandparent's texmf-local, because that is how TL is installed
+% by default. That is, given a binary
+% /usr/local/texlive/YYYY/bin/PLATFORM/kpsewhich, it should find
+% /usr/local/texlive/texmf-local/web2c/texmf.cnf. I.e., not under YYYY.
+%
+% As a result, we cannot use actual brace expansion in the definition,
+% since we don't want to scatter ../'s throughout the value. Hence we
+% explicitly list every directory. Arguably more understandable anyway.
+%
+TEXMFCNF = {\
+$SELFAUTOLOC,\
+$SELFAUTOLOC/share/texmf-local/web2c,\
+$SELFAUTOLOC/share/texmf-dist/web2c,\
+$SELFAUTOLOC/share/texmf/web2c,\
+$SELFAUTOLOC/texmf-local/web2c,\
+$SELFAUTOLOC/texmf-dist/web2c,\
+$SELFAUTOLOC/texmf/web2c,\
+\
+$SELFAUTODIR,\
+$SELFAUTODIR/share/texmf-local/web2c,\
+$SELFAUTODIR/share/texmf-dist/web2c,\
+$SELFAUTODIR/share/texmf/web2c,\
+$SELFAUTODIR/texmf-local/web2c,\
+$SELFAUTODIR/texmf-dist/web2c,\
+$SELFAUTODIR/texmf/web2c,\
+\
+$SELFAUTOPARENT/../texmf-local/web2c,\
+$SELFAUTOPARENT,\
+\
+$SELFAUTOPARENT/share/texmf-local/web2c,\
+$SELFAUTOPARENT/share/texmf-dist/web2c,\
+$SELFAUTOPARENT/share/texmf/web2c,\
+$SELFAUTOPARENT/texmf-local/web2c,\
+$SELFAUTOPARENT/texmf-dist/web2c,\
+$SELFAUTOPARENT/texmf/web2c\
+}
+%
+% For reference, here is the old brace-using definition:
+%TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
+
+% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
+% expansions from binaries linked against an earlier version of the
+% library, we set $progname and $engine to something non-empty:
+progname = unsetprogname
+engine = unsetengine
+
+
+% Part 2: Options.
+
+% If this option is set to true, `tex a.b' will look first for a.b.tex
+% (within each path element), and then for a.b, i.e., we try standard
+% extensions first. If this is false, we first look for a.b and then
+% a.b.tex, i.e., we try the name as-is first.
+%
+% Both names are always tried; the difference is the order in which they
+% are tried. The setting applies to all searches, not just .tex.
+%
+% This setting only affects names being looked up which *already* have
+% an extension. A name without an extension (e.g., `tex story') will
+% always have an extension added first.
+%
+% The default is true, because we already avoid adding the standard
+% extension(s) in the usual cases. E.g., babel.sty will only look for
+% babel.sty, not babel.sty.tex, regardless of this setting.
+try_std_extension_first = t
+
+% Enable system commands via \write18{...}. When enabled fully (set to
+% t), obviously insecure. When enabled partially (set to p), only the
+% commands listed in shell_escape_commands are allowed. Although this
+% is not fully secure either, it is much better, and so useful that we
+% enable it for everything but bare tex.
+shell_escape = p
+
+% No spaces in this command list.
+%
+% The programs listed here are as safe as any we know: they either do
+% not write any output files, respect openout_any, or have hard-coded
+% restrictions similar or higher to openout_any=p. They also have no
+% features to invoke arbitrary other programs, and no known exploitable
+% bugs. All to the best of our knowledge. They also have practical use
+% for being called from TeX.
+%
+shell_escape_commands = \
+bibtex,bibtex8,\
+kpsewhich,\
+makeindex,\
+mpost,\
+repstopdf,\
+
+% we'd like to allow:
+% dvips - but external commands can be executed, need at least -R1.
+% epspdf, ps2pdf, pstopdf - need to respect openout_any,
+% and gs -dSAFER must be used and check for shell injection with filenames.
+% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides,
+% without Unix convert it hardly seems worth it, and Windows convert
+% is something completely different that destroys filesystems, so skip.
+% pygmentize - but is the filter feature insecure?
+% ps4pdf - but it calls an unrestricted latex.
+% rpdfcrop - maybe ok, but let's get experience with repstopdf first.
+% texindy,xindy - but is the module feature insecure?
+% ulqda - but requires optional SHA1.pm, so why bother.
+% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any.
+
+% plain TeX should remain unenhanced.
+shell_escape.tex = f
+shell_escape.initex = f
+
+% This is used by the Windows script wrapper for restricting searching
+% for the purportedly safe shell_escape_commands above to system
+% directories.
+TEXMF_RESTRICTED_SCRIPTS = \
+ {!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}//
+
+% Allow TeX \openin, \openout, or \input on filenames starting with `.'
+% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
+% a (any) : any file can be opened.
+% r (restricted) : disallow opening "dotfiles".
+% p (paranoid) : as `r' and disallow going to parent directories, and
+% restrict absolute paths to be under $TEXMFOUTPUT.
+openout_any = p
+openin_any = a
+
+% Write .log/.dvi/etc. files here, if the current directory is unwritable.
+%TEXMFOUTPUT = /tmp
+
+% If a dynamic file creation fails, log the command to this file, in
+% either the current directory or TEXMFOUTPUT. Set to the
+% empty string or 0 to avoid logging.
+MISSFONT_LOG = missfont.log
+
+% Set to a colon-separated list of words specifying warnings to suppress.
+% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
+% TEX_HUSH = checksum:lostchar:readable:special
+% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
+TEX_HUSH = none
+
+% Allow TeX, and MF to parse the first line of an input file for
+% the %&format construct.
+parse_first_line = t
+
+% But don't parse the first line if invoked as "tex", since we want that
+% to remain Knuth-compatible. The src_specials and
+% file_line_error_style settings, as well as the options -enctex,
+% -mltex, -8bit, etc., also affect this, but they are all off by default.
+parse_first_line.tex = f
+parse_first_line.initex = f
+
+% Control file:line:error style messages.
+file_line_error_style = f
+
+% Enable the mktex... scripts by default? These must be set to 0 or 1.
+% Particular programs can and do override these settings, for example
+% dvips's -M option. Your first chance to specify whether the scripts
+% are invoked by default is at configure time.
+%
+% These values are ignored if the script names are changed; e.g., if you
+% set DVIPSMAKEPK to `foo', what counts is the value of the environment
+% variable/config value `FOO', not the `MKTEXPK' value.
+%
+%MKTEXTEX = 0
+%MKTEXPK = 0
+%MKTEXMF = 0
+%MKTEXTFM = 0
+%MKTEXFMT = 0
+%MKOCP = 0
+%MKOFM = 0
+
+% Used by makempx to run TeX. We use "etex" because MetaPost is
+% expecting DVI, and not "tex" because we want first line parsing.
+TEX = etex
+
+% These variables specify the external program called for the
+% interactive `e' option. %d is replaced by the line number and %s by
+% the current filename. The default is specified at compile-time, and
+% we let that stay in place since different platforms like different values.
+%TEXEDIT = vi +%d '%s' % default for Unix
+%TEXEDIT = texworks --position=+%d "%s" % default for Windows
+%MFEDIT = ${TEXEDIT}
+%MPEDIT = ${TEXEDIT}
+
+% The default `codepage and sort order' file for BibTeX8, when none is
+% given as command line option or environment variable.
+BIBTEX_CSFILE = 88591lat.csf
+
+% This variable is specific to Windows. It must be set to 0 or 1. The
+% default is 0. Setting it to 1 tells the Windows script wrappers to
+% use an already installed Perl interpreter if one is found on the
+% search path, in preference to the Perl shipped with TeX Live. Thus,
+% it may be useful if you both (a) installed a full Perl distribution
+% for general use, and (b) need to run Perl programs from TL that use
+% additional modules we don't provide. The TL Perl does provide all the
+% standard Perl modules.
+%
+%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
+
+
+% Part 3: Array and other sizes for TeX (and Metafont).
+%
+% If you want to change some of these sizes only for a certain TeX
+% variant, the usual dot notation works, e.g.,
+% main_memory.hugetex = 20000000
+%
+% If a change here appears to be ignored, try redumping the format file.
+
+% Memory. Must be less than 8,000,000 total.
+%
+% main_memory is relevant only to initex, extra_mem_* only to non-ini.
+% Thus, have to redump the .fmt file after changing main_memory; to add
+% to existing fmt files, increase extra_mem_*. (To get an idea of how
+% much, try \tracingstats=2 in your TeX source file;
+% web2c/tests/memtest.tex might also be interesting.)
+%
+% To increase space for boxes (as might be needed by, e.g., PiCTeX),
+% increase extra_mem_bot.
+%
+% For some xy-pic samples, you may need as much as 700000 words of memory.
+% For the vast majority of documents, 60000 or less will do.
+%
+main_memory = 5000000 % words of inimemory available; also applies to inimf&mp
+extra_mem_top = 0 % extra high memory for chars, tokens, etc.
+extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
+
+% ConTeXt needs lots of memory.
+extra_mem_top.context = 2000000
+extra_mem_bot.context = 4000000
+
+% Words of font info for TeX (total size of all TFM files, approximately).
+% Must be >= 20000 and <= 147483647 (without tex.ch changes).
+font_mem_size = 8000000
+
+% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
+font_max = 9000
+
+% Extra space for the hash table of control sequences.
+hash_extra = 600000
+
+% Max number of characters in all strings, including all error messages,
+% help texts, font names, control sequences. These values apply to TeX.
+pool_size = 6250000
+% Minimum pool space after TeX's own strings; must be at least
+% 25000 less than pool_size, but doesn't need to be nearly that large.
+string_vacancies = 90000
+% Maximum number of strings.
+max_strings = 500000
+% min pool space left after loading .fmt
+pool_free = 47500
+
+% Buffer size. TeX uses the buffer to contain input lines, but macro
+% expansion works by writing material into the buffer and reparsing the
+% line. As a consequence, certain constructs require the buffer to be
+% very large, even though most documents can be handled with a small value.
+buf_size = 200000
+
+% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in
+% the sources), but we don't need that much. The value here suffices
+% for all known free hyphenation patterns to be loaded simultaneously
+% (as TeX Live does).
+%
+trie_size = 1000000
+
+hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767.
+ % http://primes.utm.edu/curios/page.php/8191.html
+nest_size = 500 % simultaneous semantic levels (e.g., groups)
+max_in_open = 15 % simultaneous input files and error insertions,
+ % also applies to MetaPost
+param_size = 10000 % simultaneous macro parameters, also applies to MP
+save_size = 100000 % for saving values outside current group
+stack_size = 5000 % simultaneous input sources
+
+% These are Omega-specific.
+ocp_buf_size = 500000 % character buffers for ocp filters.
+ocp_stack_size = 10000 % stacks for ocp computations.
+ocp_list_size = 1000 % control for multiple ocps.
+
+% These work best if they are the same as the I/O buffer size, but it
+% doesn't matter much. Must be a multiple of 8.
+dvi_buf_size = 16384 % TeX
+gf_buf_size = 16384 % MF
+
+% It's probably inadvisable to change these. At any rate, we must have:
+% 45 < error_line < 255;
+% 30 < half_error_line < error_line - 15;
+% 60 <= max_print_line;
+% These apply to TeX, Metafont, and MetaPost.
+error_line = 79
+half_error_line = 50
+max_print_line = 79
+
+% Metafont only.
+screen_width.mf = 1664
+screen_depth.mf = 1200
+
+% BibTeX only (max_strings also determines hash_size and hash_prime).
+ent_str_size = 250
+glob_str_size = 20000
+max_strings.bibtex = 35307
+max_strings.bibtex8 = 35307
+max_strings.bibtexu = 35307
+max_strings.pbibtex = 35307
+
+% GFtype only.
+line_length.gftype = 500
+max_rows.gftype = 8191
+max_cols.gftype = 8191
diff --git a/libre/texlive-core/texmfcnf.lua b/libre/texlive-core/texmfcnf.lua
new file mode 100644
index 000000000..4409692be
--- /dev/null
+++ b/libre/texlive-core/texmfcnf.lua
@@ -0,0 +1,190 @@
+-- public domain
+
+-- ConTeXt needs a properly expanded TEXMFLOCAL, so here is a
+-- bit of lua code to make that happen
+
+local texmflocal = resolvers.prefixes.selfautoparent();
+texmflocal = string.gsub(texmflocal, "20%d%d$", "texmf-local");
+
+return {
+
+ type = "configuration",
+ version = "1.1.0",
+ date = "2012-05-24",
+ time = "12:12:12",
+ comment = "ConTeXt MkIV configuration file",
+ author = "Hans Hagen, PRAGMA-ADE, Hasselt NL",
+
+ content = {
+
+ -- Originally there was support for engines and progname but I don't expect
+ -- other engines to use this file, so first engines were removed. After that
+ -- if made sense also to get rid of progname. At some point specific formats
+ -- will be supported but then as a subtable with fallbacks, which sounds more
+ -- natural. Also, at some point the paths will become tables. For the moment
+ -- I don't care too much about it as extending is easy.
+
+ variables = {
+
+ -- The following variable is predefined (but can be overloaded) and in
+ -- most cases you can leve this one untouched. The built-in definition
+ -- permits relocation of the tree.
+ --
+ -- TEXMFCNF = "{selfautodir:,selfautoparent:}{,{/share,}/texmf{-local,}/web2c}"
+ --
+ -- more readable than "selfautoparent:{/texmf{-local,}{,/web2c},}}" is:
+ --
+ -- TEXMFCNF = {
+ -- "selfautoparent:/texmf-local",
+ -- "selfautoparent:/texmf-local/web2c",
+ -- "selfautoparent:/texmf-dist",
+ -- "selfautoparent:/texmf/web2c",
+ -- "selfautoparent:",
+ -- }
+
+ -- only used for FONTCONFIG_PATH & TEXMFCACHE in TeX Live
+
+ TEXMFSYSVAR = "/var/lib/texmf",
+ TEXMFVAR = "home:.texlive/texmf-var",
+
+ -- We have only one cache path but there can be more. The first writable one
+ -- will be chosen but there can be more readable paths.
+
+ TEXMFCACHE = "$TEXMFSYSVAR;$TEXMFVAR",
+ TEXMFCONFIG = "home:.texlive/texmf-config",
+
+ -- I don't like this texmf under home and texmf-home would make more
+ -- sense. One never knows what installers put under texmf anywhere and
+ -- sorting out problems will be a pain. But on the other hand ... home
+ -- mess is normally under the users own responsibility.
+ --
+ -- By using prefixes we don't get expanded paths in the cache __path__
+ -- entry. This makes the tex root relocatable.
+
+ TEXMFOS = "selfautodir:share",
+ TEXMFDIST = "selfautodir:share/texmf-dist",
+
+ TEXMFLOCAL = texmflocal,
+ TEXMFSYSCONFIG = "/etc/texmf",
+ TEXMFFONTS = "selfautoparent:texmf-fonts",
+ TEXMFPROJECT = "selfautoparent:texmf-project",
+
+ TEXMFHOME = "home:texmf",
+ -- TEXMFHOME = os.name == "macosx" and "home:Library/texmf" or "home:texmf",
+
+ -- We need texmfos for a few rare files but as I have a few more bin trees
+ -- a hack is needed. Maybe other users also have texmf-platform-new trees.
+
+ TEXMF = "{$TEXMFCONFIG,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFPROJECT,!!$TEXMFFONTS,!!$TEXMFLOCAL,!!$TEXMFDIST}",
+
+ TEXFONTMAPS = ".;$TEXMF/fonts/data//;$TEXMF/fonts/map/{pdftex,dvips}//",
+ ENCFONTS = ".;$TEXMF/fonts/data//;$TEXMF/fonts/enc/{dvips,pdftex}//",
+ VFFONTS = ".;$TEXMF/fonts/{data,vf}//",
+ TFMFONTS = ".;$TEXMF/fonts/{data,tfm}//",
+ T1FONTS = ".;$TEXMF/fonts/{data,type1}//;$OSFONTDIR",
+ AFMFONTS = ".;$TEXMF/fonts/{data,afm}//;$OSFONTDIR",
+ TTFONTS = ".;$TEXMF/fonts/{data,truetype}//;$OSFONTDIR",
+ OPENTYPEFONTS = ".;$TEXMF/fonts/{data,opentype}//;$OSFONTDIR",
+ CMAPFONTS = ".;$TEXMF/fonts/cmap//",
+ FONTFEATURES = ".;$TEXMF/fonts/{data,fea}//;$OPENTYPEFONTS;$TTFONTS;$T1FONTS;$AFMFONTS",
+ FONTCIDMAPS = ".;$TEXMF/fonts/{data,cid}//",
+ OFMFONTS = ".;$TEXMF/fonts/{data,ofm,tfm}//",
+ OVFFONTS = ".;$TEXMF/fonts/{data,ovf,vf}//",
+
+ TEXINPUTS = ".;$TEXMF/tex/{context,plain/base,generic}//",
+ MPINPUTS = ".;$TEXMF/metapost/{context,base,}//",
+
+ -- In the next variable the inputs path will go away.
+
+ TEXMFSCRIPTS = ".;$TEXMF/scripts/context/{lua,ruby,python,perl}//;$TEXINPUTS",
+ PERLINPUTS = ".;$TEXMF/scripts/context/perl",
+ PYTHONINPUTS = ".;$TEXMF/scripts/context/python",
+ RUBYINPUTS = ".;$TEXMF/scripts/context/ruby",
+ LUAINPUTS = ".;$TEXINPUTS;$TEXMF/scripts/context/lua//",
+ CLUAINPUTS = ".;$SELFAUTOLOC/lib/{context,luatex,}/lua//",
+
+ -- Not really used by MkIV so they might go away.
+
+ BIBINPUTS = ".;$TEXMF/bibtex/bib//",
+ BSTINPUTS = ".;$TEXMF/bibtex/bst//",
+
+ -- Experimental
+
+ ICCPROFILES = ".;$TEXMF/tex/context/colors/{icc,profiles}//;$OSCOLORDIR",
+
+ -- A few special ones that will change some day.
+
+ FONTCONFIG_FILE = "fonts.conf",
+ FONTCONFIG_PATH = "$TEXMFSYSVAR/fonts/conf",
+
+ },
+
+ -- We have a few reserved subtables. These control runtime behaviour. The
+ -- keys have names like 'foo.bar' which means that you have to use keys
+ -- like ['foo.bar'] so for convenience we also support 'foo_bar'.
+
+ directives = {
+
+ -- There are a few variables that determine the engines
+ -- limits. Most will fade away when we close in on version 1.
+
+ ["luatex.expanddepth"] = "10000", -- 10000
+ ["luatex.hashextra"] = "100000", -- 0
+ ["luatex.nestsize"] = "1000", -- 50
+ ["luatex.maxinopen"] = "500", -- 15
+ ["luatex.maxprintline"] = " 10000", -- 79
+ ["luatex.maxstrings"] = "500000", -- 15000 -- obsolete
+ ["luatex.paramsize"] = "25000", -- 60
+ ["luatex.savesize"] = "50000", -- 4000
+ ["luatex.stacksize"] = "10000", -- 300
+
+ -- A few process related variables come next.
+
+ -- ["system.checkglobals"] = "10",
+ -- ["system.nostatistics"] = "yes",
+ ["system.errorcontext"] = "10",
+ ["system.compile.cleanup"] = "no", -- remove tma files
+ ["system.compile.strip"] = "yes", -- strip tmc files
+
+ -- The io modes are similar to the traditional ones. Possible values
+ -- are all, paranoid and restricted.
+
+ ["system.outputmode"] = "restricted",
+ ["system.inputmode"] = "any",
+
+ -- The following variable is under consideration. We do have protection
+ -- mechanims but it's not enabled by default.
+
+ ["system.commandmode"] = "any", -- any none list
+ ["system.commandlist"] = "mtxrun, convert, inkscape, gs, imagemagick, curl, bibtex, pstoedit",
+
+ -- The mplib library support mechanisms have their own
+ -- configuration. Normally these variables can be left as
+ -- they are.
+
+ ["mplib.texerrors"] = "yes",
+
+ -- Normally you can leave the font related directives untouched
+ -- as they only make sense when testing.
+
+ -- ["fonts.autoreload"] = "no",
+ -- ["fonts.otf.loader.method"] = "table", -- table mixed sparse
+ -- ["fonts.otf.loader.cleanup"] = "0", -- 0 1 2 3
+
+ -- In an edit cycle it can be handy to launch an editor. The
+ -- preferred one can be set here.
+
+ -- ["pdfview.method"] = "okular", -- default (often acrobat) xpdf okular
+
+ },
+
+ experiments = {
+ ["fonts.autorscale"] = "yes",
+ },
+
+ trackers = {
+ },
+
+ },
+
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 21:29:37 +0000