summaryrefslogtreecommitdiff
path: root/libre/linux-libre-firmware/0002-Add-firmware-for-the-ATUSB-IEEE-802.15.4-USB-Adapter.patch
diff options
context:
space:
mode:
Diffstat (limited to 'libre/linux-libre-firmware/0002-Add-firmware-for-the-ATUSB-IEEE-802.15.4-USB-Adapter.patch')
-rw-r--r--libre/linux-libre-firmware/0002-Add-firmware-for-the-ATUSB-IEEE-802.15.4-USB-Adapter.patch4893
1 files changed, 4893 insertions, 0 deletions
diff --git a/libre/linux-libre-firmware/0002-Add-firmware-for-the-ATUSB-IEEE-802.15.4-USB-Adapter.patch b/libre/linux-libre-firmware/0002-Add-firmware-for-the-ATUSB-IEEE-802.15.4-USB-Adapter.patch
new file mode 100644
index 000000000..aa4cb07dc
--- /dev/null
+++ b/libre/linux-libre-firmware/0002-Add-firmware-for-the-ATUSB-IEEE-802.15.4-USB-Adapter.patch
@@ -0,0 +1,4893 @@
+From dd4bc9ff49b9a7075e579fdd62fd930d27a9a7df Mon Sep 17 00:00:00 2001
+From: Jason Self <j@jxself.org>
+Date: Thu, 4 Jul 2019 15:55:48 -0700
+Subject: [PATCH 2/8] Add firmware for the ATUSB IEEE 802.15.4 USB Adapter
+
+http://shop.sysmocom.de/products/atusb/
+---
+ INSTALL | 20 +-
+ Makefile | 6 +-
+ WHENCE | 12 ++
+ atusb/Makefile | 236 +++++++++++++++++++++
+ atusb/README | 94 +++++++++
+ atusb/an/README | 25 +++
+ atusb/an/dec.py | 127 ++++++++++++
+ atusb/an/get.py | 31 +++
+ atusb/an/plot | 12 ++
+ atusb/atusb.c | 63 ++++++
+ atusb/board.c | 120 +++++++++++
+ atusb/board.h | 95 +++++++++
+ atusb/board_app.c | 173 ++++++++++++++++
+ atusb/board_atusb.c | 162 +++++++++++++++
+ atusb/board_atusb.h | 48 +++++
+ atusb/board_hulusb.c | 179 ++++++++++++++++
+ atusb/board_hulusb.h | 66 ++++++
+ atusb/board_rzusb.c | 169 +++++++++++++++
+ atusb/board_rzusb.h | 48 +++++
+ atusb/boot.c | 77 +++++++
+ atusb/descr.c | 104 ++++++++++
+ atusb/ep0.c | 338 ++++++++++++++++++++++++++++++
+ atusb/flash.c | 97 +++++++++
+ atusb/include/at86rf230.h | 402 ++++++++++++++++++++++++++++++++++++
+ atusb/include/atusb/atusb.h | 97 +++++++++
+ atusb/include/atusb/ep0.h | 64 ++++++
+ atusb/mac.c | 250 ++++++++++++++++++++++
+ atusb/mac.h | 26 +++
+ atusb/sernum.c | 47 +++++
+ atusb/sernum.h | 37 ++++
+ atusb/spi.c | 51 +++++
+ atusb/spi.h | 30 +++
+ atusb/uart.c | 64 ++++++
+ atusb/uart.h | 25 +++
+ atusb/usb/atu2.c | 247 ++++++++++++++++++++++
+ atusb/usb/dfu.c | 260 +++++++++++++++++++++++
+ atusb/usb/dfu.h | 119 +++++++++++
+ atusb/usb/dfu_common.c | 101 +++++++++
+ atusb/usb/usb.c | 181 ++++++++++++++++
+ atusb/usb/usb.h | 189 +++++++++++++++++
+ atusb/version.h | 23 +++
+ 42 files changed, 4512 insertions(+), 3 deletions(-)
+ create mode 100644 atusb/Makefile
+ create mode 100644 atusb/README
+ create mode 100644 atusb/an/README
+ create mode 100755 atusb/an/dec.py
+ create mode 100755 atusb/an/get.py
+ create mode 100755 atusb/an/plot
+ create mode 100644 atusb/atusb.c
+ create mode 100644 atusb/board.c
+ create mode 100644 atusb/board.h
+ create mode 100644 atusb/board_app.c
+ create mode 100644 atusb/board_atusb.c
+ create mode 100644 atusb/board_atusb.h
+ create mode 100644 atusb/board_hulusb.c
+ create mode 100644 atusb/board_hulusb.h
+ create mode 100644 atusb/board_rzusb.c
+ create mode 100644 atusb/board_rzusb.h
+ create mode 100644 atusb/boot.c
+ create mode 100644 atusb/descr.c
+ create mode 100644 atusb/ep0.c
+ create mode 100644 atusb/flash.c
+ create mode 100644 atusb/include/at86rf230.h
+ create mode 100644 atusb/include/atusb/atusb.h
+ create mode 100644 atusb/include/atusb/ep0.h
+ create mode 100644 atusb/mac.c
+ create mode 100644 atusb/mac.h
+ create mode 100644 atusb/sernum.c
+ create mode 100644 atusb/sernum.h
+ create mode 100644 atusb/spi.c
+ create mode 100644 atusb/spi.h
+ create mode 100644 atusb/uart.c
+ create mode 100644 atusb/uart.h
+ create mode 100644 atusb/usb/atu2.c
+ create mode 100644 atusb/usb/dfu.c
+ create mode 100644 atusb/usb/dfu.h
+ create mode 100644 atusb/usb/dfu_common.c
+ create mode 100644 atusb/usb/usb.c
+ create mode 100644 atusb/usb/usb.h
+ create mode 100644 atusb/version.h
+
+diff --git a/INSTALL b/INSTALL
+index 74c5cfd..7fb1116 100644
+--- a/INSTALL
++++ b/INSTALL
+@@ -16,6 +16,8 @@ In order to build everything you will need the following on the host
+ system:
+
+ * A C/C++ compiler, like GCC
++ * AVR-GCC
++ * Standard C library for AVR-GCC
+ * Cmake
+ * GNU Bison/YACC
+ * GNU Flex
+@@ -32,13 +34,27 @@ system:
+
+ On GNU/Linux distros that use apt you can install these with:
+
+- apt install binutils-arm-linux-gnueabi binutils-arm-none-eabi bison \
+- cmake flex g++ gcc gcc-arm-linux-gnueabi gcc-arm-none-eabi gperf make wget
++ apt install avr-gcc avr-libc binutils-arm-linux-gnueabi \
++ binutils-arm-none-eabi bison cmake flex g++ gcc \
++ gcc-arm-linux-gnueabi gcc-arm-none-eabi gperf make wget
+
+ CARL9170 Firmware Configuration
++-------------------------------
+ When building the carl9170 firmware you will be prompted with
+ configuration questions.
+
++atusb: Firmware for the ATUSB IEEE 802.15.4 USB Adapter
++-------------------------------------------------------
++
++To flash the firmware you need dfu-util on the host. Issue
++
++ make dfu
++
++right after plugging the device into the USB port while the red led is
++still on.
++
++Refer to the included README file for more information.
++
+ Licensing
+ ---------
+
+diff --git a/Makefile b/Makefile
+index 21d16fb..8474b30 100644
+--- a/Makefile
++++ b/Makefile
+@@ -17,7 +17,7 @@ shell=/bin/sh
+ prefix=/lib/firmware
+ install_program=install
+
+-.PHONY: all test clean install a56 as31 aica ath9k_htc_toolchain ath9k_htc av7110 b43-tools carl9170fw-toolchain carl9170fw cis-tools cis dsp56k ihex2fw isci keyspan_pda openfwwf usbdux
++.PHONY: all test clean install a56 as31 aica ath9k_htc_toolchain ath9k_htc atusb av7110 b43-tools carl9170fw-toolchain carl9170fw cis-tools cis dsp56k ihex2fw isci keyspan_pda openfwwf usbdux
+
+ all: aica ath9k_htc av7110 carl9170fw cis dsp56k isci keyspan_pda openfwwf usbdux
+
+@@ -36,6 +36,9 @@ ath9k_htc_toolchain:
+ ath9k_htc: ath9k_htc_toolchain
+ cd ath9k_htc && $(MAKE) -C target_firmware
+
++atusb:
++ cd atusb && $(MAKE)
++
+ av7110:
+ cd av7110 && $(MAKE)
+
+@@ -81,6 +84,7 @@ clean:
+ if [ -a as31/Makefile ]; then cd as31 && $(MAKE) clean; fi;
+ cd ath9k_htc && $(MAKE) toolchain-clean
+ cd ath9k_htc && $(MAKE) -C target_firmware clean
++ cd atusb && $(MAKE) clean
+ cd av7110 && $(MAKE) clean
+ cd carl9170fw/toolchain && $(MAKE) clean
+ if [ -a carl9170fw/Makefile ]; then cd carl9170fw && $(MAKE) clean; fi;
+diff --git a/WHENCE b/WHENCE
+index 2932155..756de43 100644
+--- a/WHENCE
++++ b/WHENCE
+@@ -112,6 +112,18 @@ From https://github.com/qca/open-ath9k-htc-firmware
+
+ --------------------------------------------------------------------------
+
++atusb: Firmware for the ATUSB IEEE 802.15.4 USB Adapter
++http://shop.sysmocom.de/products/atusb/
++
++From http://projects.qi-hardware.com/index.php/p/ben-wpan/source/tree/master/atusb/fw
++
++License: GPL-2.0-or-later
++
++Version: Based on commit 805db6ebf5d80692158acadf88e239da9d3e67af
++dated September 13 2017
++
++--------------------------------------------------------------------------
++
+ Driver: b43 - OpenFWWF -- Free firmware for some Broadcom 43xx series WLAN chips
+
+ License: GPLv2
+diff --git a/atusb/Makefile b/atusb/Makefile
+new file mode 100644
+index 0000000..c79cb26
+--- /dev/null
++++ b/atusb/Makefile
+@@ -0,0 +1,236 @@
++#
++# Makefile - Makefile of the ATUSB firmware
++#
++# Written 2010-2011, 2013 by Werner Almesberger
++# Copyright 2010-2011, 2013 by Werner Almesberger
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++
++SHELL = /bin/bash
++
++NAME = atusb
++DEBUG = false
++
++CFLAGS = -g -mmcu=$(CHIP) -DBOOT_ADDR=$(BOOT_ADDR) \
++ -Wall -Wextra -Wshadow -Werror -Wno-unused-parameter \
++ -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes
++
++ifeq ($(DEBUG),true)
++CFLAGS += -DDEBUG
++endif
++
++ifeq ($(NAME),rzusb)
++CHIP=at90usb1287
++CFLAGS += -DRZUSB -DAT86RF230
++else ifeq ($(NAME),hulusb)
++CHIP=at90usb1287
++CFLAGS += -DHULUSB -DAT86RF212
++else
++CHIP=atmega32u2
++CFLAGS += -DATUSB -DAT86RF231
++endif
++HOST=jlime
++BOOT_ADDR=0x7000
++
++AVR_PREFIX = $(BIN_PATH) avr-
++CC = $(AVR_PREFIX)gcc
++OBJCOPY = $(AVR_PREFIX)objcopy
++#OBJDUMP = $(AVR_PREFIX)objdump
++SIZE = $(AVR_PREFIX)size
++
++# BCD notion is 0xJJMM with JJ being major and MM being minor. Thus 0x0020 is
++# version 0.2 */
++USB_BCD_VERSION = 0030
++USB_VENDOR_ID = 20b7
++USB_PRODUCT_ID = 1540
++USB_ID = $(USB_VENDOR_ID):$(USB_PRODUCT_ID)
++
++OBJS = atusb.o board.o board_app.o sernum.o spi.o descr.o ep0.o \
++ dfu_common.o usb.o app-atu2.o mac.o
++BOOT_OBJS = boot.o board.o sernum.o spi.o flash.o dfu.o \
++ dfu_common.o usb.o boot-atu2.o
++
++ifeq ($(DEBUG),true)
++OBJS += uart.o
++endif
++
++ifeq ($(NAME),rzusb)
++OBJS += board_rzusb.o
++BOOT_OBJS += board_rzusb.o
++else ifeq ($(NAME),hulusb)
++OBJS += board_hulusb.o
++BOOT_OBJS += board_hulusb.o
++else
++OBJS += board_atusb.o
++BOOT_OBJS += board_atusb.o
++endif
++
++
++vpath %.c usb/
++
++CFLAGS += -Iinclude -Iusb -I.
++
++# ----- Verbosity control -----------------------------------------------------
++
++CC_normal := $(CC)
++BUILD_normal :=
++DEPEND_normal := $(CPP) $(CFLAGS) -MM -MG
++
++CC_quiet = @echo " CC " $@ && $(CC_normal)
++BUILD_quiet = @echo " BUILD " $@ && $(BUILD_normal)
++DEPEND_quiet = @$(DEPEND_normal)
++
++ifeq ($(V),1)
++ CC = $(CC_normal)
++ BUILD = $(BUILD_normal)
++ DEPEND = $(DEPEND_normal)
++else
++ CC = $(CC_quiet)
++ BUILD = $(BUILD_quiet)
++ DEPEND = $(DEPEND_quiet)
++endif
++
++# ----- Rules -----------------------------------------------------------------
++
++.PHONY: all clean upload prog dfu update version.c bindist
++.PHONY: prog-app prog-read on off reset
++
++all: $(NAME).bin boot.hex
++
++$(NAME).elf: $(OBJS)
++ $(MAKE) version.o
++ $(CC) $(CFLAGS) -o $@ $(OBJS) version.o
++ $(SIZE) $@
++
++boot.elf: $(BOOT_OBJS)
++ $(CC) $(CFLAGS) -o $@ $(BOOT_OBJS) \
++ -Wl,--section-start=.text=$(BOOT_ADDR)
++ $(SIZE) $@
++
++%.bin: %.elf
++ $(BUILD) $(OBJCOPY) -j .text -j .data -O binary $< $@
++ @echo "build #`cat .version`, `ls -l $@`"
++
++%.dfu: %.bin
++ cp $(NAME).bin $(NAME).dfu
++ dfu-suffix -a $(NAME).dfu -d 0x$(USB_BCD_VERSION) \
++ -p 0x$(USB_PRODUCT_ID) -v 0x$(USB_VENDOR_ID)
++
++%.hex: %.elf
++ $(BUILD) $(OBJCOPY) -j .text -j .data -O ihex $< $@
++ @echo "Size: `$(SIZE) -A boot.hex | sed '/Total */s///p;d'` B"
++
++# ----- Cleanup ---------------------------------------------------------------
++
++clean:
++ rm -f $(NAME).bin $(NAME).elf $(NAME).dfu
++ rm -f $(OBJS) $(OBJS:.o=.d)
++ rm -f boot.hex boot.elf
++ rm -f $(BOOT_OBJS) $(BOOT_OBJS:.o=.d)
++ rm -f version.c version.d version.o
++
++# ----- Build version ---------------------------------------------------------
++
++version.c:
++ @if [ -f .version ]; then \
++ v=`cat .version`; \
++ expr $$v + 1 >.version; \
++ else \
++ echo 0 >.version; \
++ fi
++ @[ -s .version ] || echo 0 >.version
++ @echo '/* MACHINE-GENERATED. DO NOT EDIT ! */' >version.c
++ @echo '#include "version.h"' >>version.c
++ @echo "const char *build_date = \"`date`\";" >>version.c
++ @echo "const uint16_t build_number = `cat .version`;" \
++ >>version.c
++
++# ----- Dependencies ----------------------------------------------------------
++
++MKDEP = \
++ $(DEPEND) $< | \
++ sed \
++ -e 's|^$(basename $(notdir $<)).o:|$@:|' \
++ -e '/^\(.*:\)\? */{p;s///;s/ *\\\?$$/ /;s/ */:\n/g;H;}' \
++ -e '$${g;p;}' \
++ -e d >$(basename $@).d; \
++ [ "$${PIPESTATUS[*]}" = "0 0" ] || \
++ { rm -f $(basename $@).d; exit 1; }
++
++%.o: %.c
++ $(CC) $(CFLAGS) -Os -c $<
++ $(MKDEP)
++
++-include $(OBJS:.o=.d)
++
++# ----- Object file variants --------------------------------------------------
++
++app-%.o: usb/%.c
++ $(CC) $(CFLAGS) -Os -o $@ -c $<
++ $(MKDEP)
++
++boot-%.o: usb/%.c
++ $(CC) $(CFLAGS) -DBOOT_LOADER -Os -o $@ -c $<
++ $(MKDEP)
++
++# ----- Distribution ----------------------------------------------------------
++
++BINDIST_BASE=http://downloads.qi-hardware.com/people/werner/wpan/bindist
++ATUSB_BIN_NAME=atusb-`git rev-parse HEAD | cut -c 1-7`.bin
++
++bindist:
++ qippl atusb.bin wpan/bindist/$(ATUSB_BIN_NAME)
++ @echo $(BINDIST_BASE)/$(ATUSB_BIN_NAME)
++ @echo md5sum: `md5sum atusb.bin | sed 's/ .*//'`
++ @echo atrf-id: \
++ `sed '/.*number = \(.*\);/s//#\1/p;d' version.c` \
++ `sed '/.*date = "\(.*\)";/s//\1/p;d' version.c`
++
++# ----- Programming and device control ----------------------------------------
++
++upload: $(NAME).bin boot.hex
++ scp $(NAME).bin boot.hex $(HOST):
++
++# lfuse: external clock, slow start-up
++# hfuse: 4 kB boot loader, reset into boot loader
++# lock: allow everything but SPM to the boot loader
++# Note: when trying to program 0xef, we get back 0x2f, failing
++# verification. So we just program 0x2f.
++
++prog-app:
++ ssh $(HOST) avrdude -F -p $(CHIP) -c nanonote_atusb -e \
++ -U flash:w:atusb.bin:r \
++ -U lfuse:w:0x60:m
++
++prog:
++ ssh $(HOST) avrdude -F -p $(CHIP) -c nanonote_atusb -e \
++ -U flash:w:boot.hex:i \
++ -U lfuse:w:0x60:m \
++ -U hfuse:w:0xd8:m \
++ -U lock:w:0x2f:m
++
++prog-read:
++ ssh $(HOST) avrdude -F -p $(CHIP) -c nanonote_atusb \
++ -U flash:r:mcu.bin:r
++
++dfu: $(NAME).dfu
++ dfu-util -d $(USB_ID) -D $(NAME).dfu
++
++update: $(NAME).bin
++ -atrf-reset -a
++ usbwait -r -i 0.01 -t 5 $(USB_ID)
++ $(MAKE) dfu
++
++on:
++ ssh $(HOST) poke 0x10010318 4
++
++off:
++ ssh $(HOST) poke 0x10010314 4
++
++reset:
++ ssh $(HOST) poke 0x10010318 2048
++ ssh $(HOST) poke 0x10010314 2048
+diff --git a/atusb/README b/atusb/README
+new file mode 100644
+index 0000000..99ceb22
+--- /dev/null
++++ b/atusb/README
+@@ -0,0 +1,94 @@
++Requires a very recent toolchain, because ATmega32U2 is relatively new.
++
++- Building:
++
++ make
++
++- Uploading the firmware to a Ben (for flashing with the atusb-pgm cable):
++
++ make HOST=<hostname> upload
++
++ Example:
++
++ make HOST=ben upload
++
++ HOST defaults to "jlime".
++
++- Flashing the boot loader:
++
++ Prerequisite: avrdude on the Ben.
++
++ Disconnect the atusb board from USB. Insert the atusb-pgm connector into
++ the Ben. Place the atusb-pgm adapter on the exposed contact pads of the
++ atusb board and push it down. Then run
++
++ make prog
++
++ This takes about 30 seconds. If the programming fails with an error
++ message like "Yikes! Invalid device signature.", verify that the
++ atusb-pgm board is properly connected and placed, then try again.
++
++- Uploading the application:
++
++ Prerequisite: dfu-util installed on the PC.
++
++ Insert atusb into the PC, then run
++
++ make dfu
++
++ Note: since the boot loader resets the USB bus after timing out,
++ this operation can fail with a message like "No DFU capable USB device
++ found". Just retry, and it will eventually get through.
++
++
++HULUSB notes:
++-------------
++To prepare and flash the firmware on a HULUSB device some additional steps are
++needed;
++
++avr-objcopy -O ihex -R .signature -R .fuse -R .eeprom hulusb.elf hulusb.hex
++dfu-programmer at90usb1287 flash hulusb.hex
++dfu-programmer at90usb1287 reset
++
++--------------------------
++
++Making the toolchain:
++
++# patches according to
++# http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&p=789527
++
++# some gcc prerequisites
++
++apt-get remove avr-libc gcc-avr binutils-avr
++apt-get install libmpfr-dev libmpc-dev
++
++# binutils
++
++wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.tar.bz2
++tar xfj binutils-2.21.tar.bz2
++cd binutils-2.21
++./configure --target=avr --disable-nls
++make
++make install
++
++# gcc
++
++wget http://ftpmirror.gnu.org/gcc/gcc-4.5.2/gcc-4.5.2.tar.bz2
++wget -O gcc_452_avr.patch http://gcc.gnu.org/bugzilla/attachment.cgi?id=23050
++tar xfj gcc-4.5.2.tar.bz2
++cd gcc-4.5.2
++patch -p1 -s <../gcc_452_avr.patch
++mkdir obj-avr
++cd obj-avr
++../configure --target=avr --enable-languages=c \
++ --disable-nls --disable-libssp --with-dwarf2
++make
++make install
++
++wget http://download.savannah.gnu.org/releases/avr-libc/avr-libc-1.7.1.tar.bz2
++tar xfj avr-libc-1.7.1.tar.bz2
++cd avr-libc-1.7.1
++./bootstrap # the automake at the end takes a while
++./configure --build=`./config.guess` --host=avr
++make
++make install
+diff --git a/atusb/an/README b/atusb/an/README
+new file mode 100644
+index 0000000..8e0d2fc
+--- /dev/null
++++ b/atusb/an/README
+@@ -0,0 +1,25 @@
++workflow:
++
++- connect zprobe (note: it currently inverts because it didn't have any
++ other chips around. this may change later.)
++
++- capture the USB signals at an interesting moment with a sample rate of
++ 50 MSa/s
++
++- zoom into the frame(s) of interest
++
++- download the data with
++ ./get.py
++
++- decode with
++ ./dec.py
++
++ For manual decoding, set the coders to D+ and D- (we need D- for SE0
++ and SE1 detection), then click on a rising clock edge left of the
++ packet and move the cursor to the right.
++
++- if there are problems with the clock, the analog signal and digital
++ signals derived from it can be examined after running dec.py with
++ ./plot
++
++ (Note that the digital zprobe hides any analog anomalies.)
+diff --git a/atusb/an/dec.py b/atusb/an/dec.py
+new file mode 100755
+index 0000000..8534857
+--- /dev/null
++++ b/atusb/an/dec.py
+@@ -0,0 +1,127 @@
++#!/usr/bin/python
++
++from tmc.wave import *
++from tmc.dxplore import dxplore
++from tmc.decode import d_usb_stream
++
++
++#
++# Clock recovery: we assume that each change in the wave is triggered by a
++# clock edge. We know the clock's nominal period and resynchronize on each
++# edge. Additionally, we can obtain a list of times when a timing violation
++# has occurred.
++#
++# Note that the timing violations logic doesn't make much sense in its present
++# form, since it mainly measures noise (particularly if we're digitizing slow
++# edges) and not clock drift.
++#
++# A more useful metric would be accumulated error from some point of reference
++# or at least the timing of same edges, to eliminate (generally harmless) time
++# offsets introduced by digitizing.
++#
++# So it would probably make more sense for "recover" not to check for timing
++# violations at all, and leave this to more specialized functions.
++#
++def recover(self, period, min = None, max = None, t0 = None):
++ if t0 is None:
++ t0 = self.data[0]
++ v = not self.initial
++ res = []
++ violations = []
++ for t in self.data:
++ v = not v
++ if t <= t0:
++ continue
++ n = 0
++ while t0 < t-period/2:
++ res.append(t0)
++ t0 += period
++ n += 1
++ if min is not None:
++ if t0-t > n*min:
++ violations.append(t)
++ if max is not None:
++ if t-t0 > n*max:
++ violations.append(t)
++ t0 = t
++ return res, violations
++
++
++#
++# Load the analog waves saved by get.py
++#
++wv = waves()
++wv.load("_wv")
++
++#
++# Digitize the waves and save the result.
++#
++dp = wv[0].digitize(1.5, 1.8)
++dm = wv[1].digitize(1.5, 1.8)
++wv = waves(dp, dm, dp-dm)
++wv.save("_dig")
++
++#
++# Also record the differential signal.
++#
++wd = wv[1]-wv[0]
++dd = wd.digitize(-0.5, 0.5)
++wd.save("_diff")
++
++#
++# Run clock recovery on D+/D-. We only need one, but check both to be sure.
++#
++#p = 1/1.5e6
++p = 1/12e6
++dp_t, viol = recover(dp, p, p*0.9, p*1.1)
++print viol
++dm_t, viol = recover(dm, p, p*.9, p*1.1, t0 = dp.data[0])
++print viol
++
++#
++# Shift the clock by half a period, add a few periods to get steady state and
++# SE0s (if any), and then sample the data lines.
++#
++clk = map(lambda t: t+p/2, dp_t)
++clk.extend((clk[-1]+p, clk[-1]+2*p, clk[-1]+3*p))
++dp_bv = dp.get(clk)
++dm_bv = dm.get(clk)
++
++#
++# Save a wave with the recovered clock to make it easier to find the bits in
++# analog graphs.
++#
++dd.data = dp_t;
++dd.save("_clk")
++
++#
++# For decoding, we need a fake bit clock. We generate it by doubling each data
++# bit and generating a L->H transition during this bit.
++#
++dpd = []
++dmd = []
++dck = []
++
++# err, silly, seems that we've mixed up D+ and D- all over the place :-)
++print d_usb_stream(dm_bv[:], dp_bv[:])
++
++for v in dp_bv:
++ dpd.append(v)
++ dpd.append(v)
++ dck.append(0)
++ dck.append(1)
++
++for v in dm_bv:
++ dmd.append(v)
++ dmd.append(v)
++
++#
++# Display the reconstructed digital signal. Note that the absolute time is only
++# correct at the beginning and that relative time is only accurate over
++# intervals in which no significant clock resynchronization has occurred.
++#
++# In fact, dxplore should probably have an option to either turn off time
++# entirely or to display a user-provided time axis. The latter may be a bit
++# tricky to implement.
++#
++dxplore((dmd, dpd, dck), 0, p/2, labels = ("D+", "D-", "CLK"))
+diff --git a/atusb/an/get.py b/atusb/an/get.py
+new file mode 100755
+index 0000000..685e00f
+--- /dev/null
++++ b/atusb/an/get.py
+@@ -0,0 +1,31 @@
++#!/usr/bin/python
++
++from tmc.scope import rigol_ds1000c
++
++#-800, +1600
++s = rigol_ds1000c()
++#s.debug = False
++
++pos = s.hor.pos
++scale = s.hor.scale
++t0 = pos-scale*s.div_hor/2
++t1 = pos+scale*s.div_hor/2
++print t0, t1
++
++#zoom = 10
++#step = scale/s.samples_per_div/zoom
++#print step
++step = 4e-9
++step = 2e-9
++
++w = s.wave((s.ch[0], s.ch[1]), start = t0, end = t1, step = step)
++w[0] = 3.3-w[0]
++w[1] = 3.3-w[1]
++
++s.hor.pos = pos
++s.hor.scale = scale
++
++w[0].label = "D+";
++w[1].label = "D-";
++
++w.save("_wv")
+diff --git a/atusb/an/plot b/atusb/an/plot
+new file mode 100755
+index 0000000..1dea789
+--- /dev/null
++++ b/atusb/an/plot
+@@ -0,0 +1,12 @@
++#!/bin/sh
++#
++# Plot output of "dec"
++#
++gnuplot -persist <<EOF
++set style data lines
++plot "_wv" using 1:(\$2-4), \
++ "_dig" using 1:(\$2*3.3-4) lw 2, \
++ "_wv" using 1:3, \
++ "_dig" using 1:(\$3*3.3) lw 2, \
++ "_clk" using 1:(\$2+1) lt 7
++EOF
+diff --git a/atusb/atusb.c b/atusb/atusb.c
+new file mode 100644
+index 0000000..28faf40
+--- /dev/null
++++ b/atusb/atusb.c
+@@ -0,0 +1,63 @@
++/*
++ * fw/atusb.c - ATUSB initialization and main loop
++ *
++ * Written 2008-2011 by Werner Almesberger
++ * Copyright 2008-2011 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdint.h>
++
++#include <avr/io.h>
++#include <avr/sleep.h>
++#include <avr/interrupt.h>
++
++#include "usb.h"
++
++#include "board.h"
++#include "sernum.h"
++#include "spi.h"
++#include "atusb/ep0.h"
++
++#ifdef DEBUG
++#include "uart.h"
++#endif
++
++
++int main(void)
++{
++ board_init();
++ board_app_init();
++ reset_rf();
++
++ user_get_descriptor = sernum_get_descr;
++
++ /* now we should be at 8 MHz */
++
++#ifdef DEBUG
++ uart_init();
++ static FILE atben_stdout = FDEV_SETUP_STREAM(uart_write_char, NULL,
++ _FDEV_SETUP_WRITE);
++ stdout = &atben_stdout;
++#endif
++
++ usb_init();
++ ep0_init();
++#ifdef ATUSB
++ timer_init();
++
++ /* move interrupt vectors to 0 */
++ MCUCR = 1 << IVCE;
++ MCUCR = 0;
++#endif
++
++ sei();
++
++ while (1)
++ sleep_mode();
++}
+diff --git a/atusb/board.c b/atusb/board.c
+new file mode 100644
+index 0000000..c3b8d26
+--- /dev/null
++++ b/atusb/board.c
+@@ -0,0 +1,120 @@
++/*
++ * fw/board.c - Board-specific functions (for boot loader and application)
++ *
++ * Written 2011, 2013 by Werner Almesberger
++ * Copyright 2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <avr/io.h>
++#include <avr/interrupt.h>
++#include <avr/boot.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#include "usb.h"
++#include "at86rf230.h"
++#include "board.h"
++#include "spi.h"
++
++
++uint8_t board_sernum[42] = { 42, USB_DT_STRING };
++
++/* ----- Register access --------------------------------------------------- */
++
++void change_state(uint8_t new)
++{
++ while ((reg_read(REG_TRX_STATUS) & TRX_STATUS_MASK) ==
++ TRX_STATUS_TRANSITION);
++ reg_write(REG_TRX_STATE, new);
++}
++
++
++uint8_t reg_read(uint8_t reg)
++{
++ uint8_t value;
++
++ spi_begin();
++ spi_send(AT86RF230_REG_READ | reg);
++ value = spi_recv();
++ spi_end();
++
++ return value;
++}
++
++
++uint8_t subreg_read(uint8_t address, uint8_t mask, uint8_t position)
++{
++ /* Read current register value and mask out subregister. */
++ uint8_t register_value = reg_read(address);
++ register_value &= mask;
++ register_value >>= position; /* Align subregister value. */
++
++ return register_value;
++}
++
++
++void reg_write(uint8_t reg, uint8_t value)
++{
++ spi_begin();
++ spi_send(AT86RF230_REG_WRITE | reg);
++ spi_send(value);
++ spi_end();
++}
++
++
++void subreg_write(uint8_t address, uint8_t mask, uint8_t position, uint8_t value)
++{
++ /* Read current register value and mask area outside the subregister. */
++ uint8_t register_value = reg_read(address);
++ register_value &= ~mask;
++
++ /* Start preparing the new subregister value. shift in place and mask. */
++ value <<= position;
++ value &= mask;
++
++ value |= register_value; /* Set the new subregister value. */
++
++ /* Write the modified register value. */
++ reg_write(address, value);
++}
++
++
++void panic(void)
++{
++ cli();
++ while (1) {
++ SET(LED);
++ _delay_ms(100);
++ CLR(LED);
++ _delay_ms(100);
++ }
++}
++
++
++static char hex(uint8_t nibble)
++{
++ return nibble < 10 ? '0'+nibble : 'a'+nibble-10;
++}
++
++
++void get_sernum(void)
++{
++ uint8_t sig;
++ uint8_t i;
++
++ for (i = 0; i != 10; i++) {
++ sig = boot_signature_byte_get(i+0xe);
++ board_sernum[(i << 2)+2] = hex(sig >> 4);
++ board_sernum[(i << 2)+4] = hex(sig & 0xf);
++ }
++}
+diff --git a/atusb/board.h b/atusb/board.h
+new file mode 100644
+index 0000000..dbcd410
+--- /dev/null
++++ b/atusb/board.h
+@@ -0,0 +1,95 @@
++/*
++ * fw/board.h - Board-specific functions and definitions
++ *
++ * Written 2008-2011, 2013, 2013 by Werner Almesberger
++ * Copyright 2008-2011, 2013, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef BOARD_H
++#define BOARD_H
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <atusb/atusb.h>
++
++#ifdef ATUSB
++#include "board_atusb.h"
++#endif
++#ifdef RZUSB
++#include "board_rzusb.h"
++#endif
++#ifdef HULUSB
++#include "board_hulusb.h"
++#endif
++
++#define SET_2(p, b) PORT##p |= 1 << (b)
++#define CLR_2(p, b) PORT##p &= ~(1 << (b))
++#define IN_2(p, b) DDR##p &= ~(1 << (b))
++#define OUT_2(p, b) DDR##p |= 1 << (b)
++#define PIN_2(p, b) ((PIN##p >> (b)) & 1)
++
++#define SET_1(p, b) SET_2(p, b)
++#define CLR_1(p, b) CLR_2(p, b)
++#define IN_1(p, b) IN_2(p, b)
++#define OUT_1(p, b) OUT_2(p, b)
++#define PIN_1(p, b) PIN_2(p, b)
++
++#define SET(n) SET_1(n##_PORT, n##_BIT)
++#define CLR(n) CLR_1(n##_PORT, n##_BIT)
++#define IN(n) IN_1(n##_PORT, n##_BIT)
++#define OUT(n) OUT_1(n##_PORT, n##_BIT)
++#define PIN(n) PIN_1(n##_PORT, n##_BIT)
++
++
++#define USB_VENDOR ATUSB_VENDOR_ID
++#define USB_PRODUCT ATUSB_PRODUCT_ID
++
++#define DFU_USB_VENDOR USB_VENDOR
++#define DFU_USB_PRODUCT USB_PRODUCT
++
++
++#define BOARD_MAX_mA 40
++
++#ifdef BOOT_LOADER
++#define NUM_EPS 1
++#else
++#define NUM_EPS 2
++#endif
++
++#define HAS_BOARD_SERNUM
++
++extern uint8_t board_sernum[42];
++extern uint8_t irq_serial;
++
++
++void reset_rf(void);
++void reset_cpu(void);
++uint8_t read_irq(void);
++void slp_tr(void);
++
++void led(bool on);
++void panic(void);
++
++uint64_t timer_read(void);
++void timer_init(void);
++
++bool gpio(uint8_t port, uint8_t data, uint8_t dir, uint8_t mask, uint8_t *res);
++void gpio_cleanup(void);
++
++void get_sernum(void);
++
++void board_app_init(void);
++
++uint8_t reg_read(uint8_t reg);
++uint8_t subreg_read(uint8_t address, uint8_t mask, uint8_t position);
++void reg_write(uint8_t reg, uint8_t value);
++void subreg_write(uint8_t address, uint8_t mask, uint8_t position, uint8_t value);
++void change_state(uint8_t new);
++
++#endif /* !BOARD_H */
+diff --git a/atusb/board_app.c b/atusb/board_app.c
+new file mode 100644
+index 0000000..1fa9bf4
+--- /dev/null
++++ b/atusb/board_app.c
+@@ -0,0 +1,173 @@
++/*
++ * fw/board_app.c - Board-specific functions (for the application)
++ *
++ * Written 2011, 2013 by Werner Almesberger
++ * Copyright 2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stddef.h>
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <avr/io.h>
++#include <avr/interrupt.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#include "usb.h"
++#include "at86rf230.h"
++#include "spi.h"
++#include "mac.h"
++#include "board.h"
++
++
++static volatile uint32_t timer_h = 0; /* 2^(16+32) / 8 MHz = ~1.1 years */
++
++
++void reset_cpu(void)
++{
++ WDTCSR = 1 << WDE;
++}
++
++
++uint8_t read_irq(void)
++{
++ return PIN(IRQ_RF);
++}
++
++
++void slp_tr(void)
++{
++ SET(SLP_TR);
++ CLR(SLP_TR);
++}
++
++
++ISR(TIMER1_OVF_vect)
++{
++ timer_h++;
++}
++
++
++uint64_t timer_read(void)
++{
++ uint32_t high;
++ uint8_t low, mid;
++
++ do {
++ if (TIFR1 & (1 << TOV1)) {
++ TIFR1 = 1 << TOV1;
++ timer_h++;
++ }
++ high = timer_h;
++ low = TCNT1L;
++ mid = TCNT1H;
++ }
++ while (TIFR1 & (1 << TOV1));
++
++ /*
++ * We need all these casts because the intermediate results are handled
++ * as if they were signed and thus get sign-expanded. Sounds wrong-ish.
++ */
++ return (uint64_t) high << 16 | (uint64_t) mid << 8 | (uint64_t) low;
++}
++
++
++void timer_init(void)
++{
++ /* configure timer 1 as a free-running CLK counter */
++
++ TCCR1A = 0;
++ TCCR1B = 1 << CS10;
++
++ /* enable timer overflow interrupt */
++
++ TIMSK1 = 1 << TOIE1;
++}
++
++
++bool gpio(uint8_t port, uint8_t data, uint8_t dir, uint8_t mask, uint8_t *res)
++{
++ EIMSK = 0; /* recover INT_RF to ATUSB_GPIO_CLEANUP or an MCU reset */
++
++ switch (port) {
++ case 1:
++ DDRB = (DDRB & ~mask) | dir;
++ PORTB = (PORTB & ~mask) | data;
++ break;
++ case 2:
++ DDRC = (DDRC & ~mask) | dir;
++ PORTC = (PORTC & ~mask) | data;
++ break;
++ case 3:
++ DDRD = (DDRD & ~mask) | dir;
++ PORTD = (PORTD & ~mask) | data;
++ break;
++ default:
++ return 0;
++ }
++
++ /* disable the UART so that we can meddle with these pins as well. */
++ spi_off();
++ _delay_ms(1);
++
++ switch (port) {
++ case 1:
++ res[0] = PINB;
++ res[1] = PORTB;
++ res[2] = DDRB;
++ break;
++ case 2:
++ res[0] = PINC;
++ res[1] = PORTC;
++ res[2] = DDRC;
++ break;
++ case 3:
++ res[0] = PIND;
++ res[1] = PORTD;
++ res[2] = DDRD;
++ break;
++ }
++
++ return 1;
++}
++
++
++void gpio_cleanup(void)
++{
++ EIMSK = 1 << 0;
++}
++
++
++static void done(void *user)
++{
++ led(0);
++}
++
++
++uint8_t irq_serial;
++
++#if defined(ATUSB) || defined(HULUSB)
++ISR(INT0_vect)
++#endif
++#ifdef RZUSB
++ISR(TIMER1_CAPT_vect)
++#endif
++{
++ if (mac_irq) {
++ if (mac_irq())
++ return;
++ }
++ if (eps[1].state == EP_IDLE) {
++ led(1);
++ irq_serial = (irq_serial+1) | 0x80;
++ usb_send(&eps[1], &irq_serial, 1, done, NULL);
++ }
++}
+diff --git a/atusb/board_atusb.c b/atusb/board_atusb.c
+new file mode 100644
+index 0000000..a02fb7f
+--- /dev/null
++++ b/atusb/board_atusb.c
+@@ -0,0 +1,162 @@
++/*
++ * fw/board_atusb.c - ATUSB Board-specific functions (for boot loader and application)
++ *
++ * Written 2016 by Stefan Schmidt
++ * Copyright 2016 Stefan Schmidt
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <avr/io.h>
++#include <avr/interrupt.h>
++#include <avr/boot.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#include "usb.h"
++#include "at86rf230.h"
++#include "board.h"
++#include "spi.h"
++#include "usb/usb.h"
++
++static bool spi_initialized = 0;
++
++void reset_rf(void)
++{
++ /* set up all the outputs; default port value is 0 */
++
++ DDRB = 0;
++ DDRC = 0;
++ DDRD = 0;
++ PORTB = 0;
++ PORTC = 0;
++ PORTD = 0;
++
++ OUT(LED);
++ OUT(nRST_RF); /* this also resets the transceiver */
++ OUT(SLP_TR);
++
++ spi_init();
++
++ /* AT86RF231 data sheet, 12.4.13, reset pulse width: 625 ns (min) */
++
++ CLR(nRST_RF);
++ _delay_us(2);
++ SET(nRST_RF);
++
++ /* 12.4.14: SPI access latency after reset: 625 ns (min) */
++
++ _delay_us(2);
++
++ /* we must restore TRX_CTRL_0 after each reset (9.6.4) */
++
++ set_clkm();
++}
++
++void led(bool on)
++{
++ if (on)
++ SET(LED);
++ else
++ CLR(LED);
++}
++
++void set_clkm(void)
++{
++ /* switch CLKM to 8 MHz */
++
++ /*
++ * @@@ Note: Atmel advise against changing the external clock in
++ * mid-flight. We should therefore switch to the RC clock first, then
++ * crank up the external clock, and finally switch back to the external
++ * clock. The clock switching procedure is described in the ATmega32U2
++ * data sheet in secton 8.2.2.
++ */
++ spi_begin();
++ spi_send(AT86RF230_REG_WRITE | REG_TRX_CTRL_0);
++ spi_send(CLKM_CTRL_8MHz);
++ spi_end();
++}
++
++void board_init(void)
++{
++ /* Disable the watchdog timer */
++
++ MCUSR = 0; /* Remove override */
++ WDTCSR |= 1 << WDCE; /* Enable change */
++ WDTCSR = 1 << WDCE; /* Disable watchdog while still enabling
++ change */
++
++ CLKPR = 1 << CLKPCE;
++ /* We start with a 1 MHz/8 clock. Disable the prescaler. */
++ CLKPR = 0;
++
++ get_sernum();
++}
++
++void spi_begin(void)
++{
++ if (!spi_initialized)
++ spi_init();
++ CLR(nSS);
++}
++
++void spi_off(void)
++{
++ spi_initialized = 0;
++ UCSR1B = 0;
++}
++
++void spi_init(void)
++{
++ SET(nSS);
++ OUT(SCLK);
++ OUT(MOSI);
++ OUT(nSS);
++ IN(MISO);
++
++ UBRR1 = 0; /* set bit rate to zero to begin */
++ UCSR1C = 1 << UMSEL11 | 1 << UMSEL10;
++ /* set MSPI, MSB first, SPI data mode 0 */
++ UCSR1B = 1 << RXEN1 | 1 << TXEN1;
++ /* enable receiver and transmitter */
++ UBRR1 = 0; /* reconfirm the bit rate */
++
++ spi_initialized = 1;
++}
++
++void usb_init(void)
++{
++ USBCON |= 1 << FRZCLK; /* freeze the clock */
++
++ /* enable the PLL and wait for it to lock */
++ PLLCSR &= ~(1 << PLLP2 | 1 << PLLP1 | 1 << PLLP0);
++ PLLCSR |= 1 << PLLE;
++ while (!(PLLCSR & (1 << PLOCK)));
++
++ USBCON &= ~(1 << USBE); /* reset the controller */
++ USBCON |= 1 << USBE;
++
++ USBCON &= ~(1 << FRZCLK); /* thaw the clock */
++
++ UDCON &= ~(1 << DETACH); /* attach the pull-up */
++ UDIEN = 1 << EORSTE; /* enable device interrupts */
++// UDCON |= 1 << RSTCPU; /* reset CPU on bus reset */
++
++ ep_init();
++}
++
++void board_app_init(void)
++{
++ /* enable INT0, trigger on rising edge */
++ EICRA = 1 << ISC01 | 1 << ISC00;
++ EIMSK = 1 << 0;
++}
+diff --git a/atusb/board_atusb.h b/atusb/board_atusb.h
+new file mode 100644
+index 0000000..e5974c7
+--- /dev/null
++++ b/atusb/board_atusb.h
+@@ -0,0 +1,48 @@
++/*
++ * fw/board_atusb.h - ATUSB Board-specific functions and definitions
++ *
++ * Written 2016 by Stefan Schmidt
++ * Copyright 2016 Stefan Schmidt
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef BOARD_ATUSB_H
++#define BOARD_ATUSB_H
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#define LED_PORT B
++#define LED_BIT 6
++#define nRST_RF_PORT C
++#define nRST_RF_BIT 7
++#define SLP_TR_PORT B
++#define SLP_TR_BIT 4
++
++#define SCLK_PORT D
++#define SCLK_BIT 5
++#define MOSI_PORT D
++#define MOSI_BIT 3
++
++#define MISO_PORT D
++#define MISO_BIT 2
++#define nSS_PORT D
++#define nSS_BIT 1
++#define IRQ_RF_PORT D
++#define IRQ_RF_BIT 0
++
++#define SPI_WAIT_DONE() while (!(UCSR1A & 1 << RXC1))
++#define SPI_DATA UDR1
++
++void set_clkm(void);
++void board_init(void);
++
++void spi_begin(void);
++void spi_off(void);
++void spi_init(void);
++
++#endif /* !BOARD_H */
+diff --git a/atusb/board_hulusb.c b/atusb/board_hulusb.c
+new file mode 100644
+index 0000000..084714e
+--- /dev/null
++++ b/atusb/board_hulusb.c
+@@ -0,0 +1,179 @@
++/*
++ * fw/board_hulusb.c - Busware HUL Board-specific functions (for boot loader and application)
++ *
++ * Written 2017 by Filzmaier Josef
++ * Based on fw/board_rzusb written and Copyright 2016 Stefan Schmidt
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <avr/io.h>
++#include <avr/interrupt.h>
++#include <avr/boot.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#include "usb.h"
++#include "at86rf230.h"
++#include "board.h"
++#include "spi.h"
++#include "usb/usb.h"
++
++static bool spi_initialized = 0;
++
++void reset_rf(void)
++{
++ /* set up all the outputs; default port value is 0 */
++
++ DDRB = 0;
++ DDRC = 0;
++ DDRD = 0;
++ PORTB = 0;
++ PORTC = 0;
++ PORTD = 0;
++
++ OUT(LED_RED);
++ OUT(LED_GREEN);
++ SET(LED_RED); /* Leds are active low on HULUSB board */
++ CLR(LED_GREEN); /* Green Led indicates the dongle is running */
++ OUT(nRST_RF); /* this also resets the transceiver */
++ OUT(SLP_TR);
++
++ spi_init();
++
++ /* AT86RF212 data sheet, Appendix B, p166 Power-On Reset procedure */
++ /*-----------------------------------------------------------------*/
++ CLR(SLP_TR);
++ SET(nRST_RF);
++ SET(nSS);
++ _delay_us(400);
++
++ CLR(nRST_RF);
++ _delay_us(2);
++ SET(nRST_RF);
++
++ /* 5.1.4.5: Wait t10: 625 ns (min) */
++
++ _delay_us(2);
++
++ reg_write(REG_TRX_CTRL_0, 0x19);
++
++ change_state(TRX_CMD_FORCE_TRX_OFF);
++ /*-----------------------------------------------------------------*/
++
++ /* we must restore TRX_CTRL_0 after each reset (7.7.4) */
++
++ set_clkm();
++}
++
++void led_red(bool on) {
++ if (on)
++ CLR(LED_RED);
++ else
++ SET(LED_RED);
++}
++
++void led_green(bool on) {
++ if (on)
++ CLR(LED_GREEN);
++ else
++ SET(LED_GREEN);
++}
++
++void led(bool on)
++{
++ led_red(on);
++}
++
++void set_clkm(void)
++{
++ /* CLKM is not connected on BUSWARE HUL and therefore it is running in
++ * async mode. */
++ reg_write(REG_TRX_CTRL_0, 0x00);
++
++ /* TX_AUTO_CRC_ON, default disabled */
++ subreg_write(SR_TX_AUTO_CRC_ON, 1);
++}
++
++void board_init(void)
++{
++ /* Disable the watchdog timer */
++
++ MCUSR = 0; /* Remove override */
++ WDTCSR |= 1 << WDCE; /* Enable change */
++ WDTCSR = 1 << WDCE; /* Disable watchdog while still enabling
++ change */
++
++ CLKPR = 1 << CLKPCE;
++ /* We start with a 16 MHz/8 clock. Put the prescaler to 2. */
++ CLKPR = 1 << CLKPS0;
++
++ get_sernum();
++}
++
++void spi_begin(void)
++{
++ if (!spi_initialized)
++ spi_init();
++ CLR(nSS);
++}
++
++void spi_off(void)
++{
++ spi_initialized = 0;
++ SPCR &= ~(1 << SPE);
++}
++
++void spi_init(void)
++{
++ SET(nSS);
++ OUT(SCLK);
++ OUT(MOSI);
++ OUT(nSS);
++ IN(MISO);
++
++ SPCR = (1 << SPE) | (1 << MSTR);
++ SPSR = (1 << SPI2X);
++
++ spi_initialized = 1;
++}
++
++void usb_init(void)
++{
++ USBCON |= 1 << FRZCLK; /* freeze the clock */
++
++ /* enable the PLL and wait for it to lock */
++ /* TODO sheet page 50 For Atmel AT90USB128x only. Do not use with Atmel AT90USB64x. */
++ /* FOR 8 XTAL Mhz only!!! */
++ PLLCSR = ((1 << PLLP1) | (1 << PLLP0));
++ PLLCSR |= 1 << PLLE;
++ while (!(PLLCSR & (1 << PLOCK)));
++
++ UHWCON |= (1 << UVREGE);
++
++ USBCON &= ~((1 << USBE) | (1 << OTGPADE)); /* reset the controller */
++ USBCON |= ((1 << USBE) | (1 << OTGPADE));
++
++ USBCON &= ~(1 << FRZCLK); /* thaw the clock */
++
++ UDCON &= ~(1 << DETACH); /* attach the pull-up */
++ UDIEN = 1 << EORSTE; /* enable device interrupts */
++ // UDCON |= 1 << RSTCPU; /* reset CPU on bus reset */
++
++ ep_init();
++}
++
++void board_app_init(void)
++{
++ /* enable INT0, trigger on rising edge */
++ EICRA = 1 << ISC01 | 1 << ISC00;
++ EIMSK = 1 << INT0;
++}
+diff --git a/atusb/board_hulusb.h b/atusb/board_hulusb.h
+new file mode 100644
+index 0000000..a1dadf0
+--- /dev/null
++++ b/atusb/board_hulusb.h
+@@ -0,0 +1,66 @@
++/*
++ * fw/board_hulusb.h - Busware HUL Board-specific functions (for boot loader and application)
++ *
++ * Written 2017 by Filzmaier Josef
++ * Based on fw/board_rzusb written and Copyright 2016 Stefan Schmidt
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef BOARD_HULUSB_H
++#define BOARD_HULUSB_H
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#define LED_RED_PORT A
++#define LED_GREEN_PORT A
++#define LED_RED_BIT 3
++#define LED_GREEN_BIT 4
++#define LED_PORT LED_RED_PORT
++#define LED_BIT LED_RED_BIT
++
++#define nRST_RF_PORT B
++#define nRST_RF_BIT 5
++#define SLP_TR_PORT B
++#define SLP_TR_BIT 4
++
++#define SCLK_PORT B
++#define SCLK_BIT 1
++#define MOSI_PORT B
++#define MOSI_BIT 2
++
++#define MISO_PORT B
++#define MISO_BIT 3
++#define nSS_PORT B
++#define nSS_BIT 0
++#define IRQ_RF_PORT D
++#define IRQ_RF_BIT 4
++
++#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5
++#define SR_CHANNEL 0x08, 0x1f, 0
++
++#define RG_CC_CTRL_1 (0x14)
++
++#define SPI_WAIT_DONE() while ((SPSR & (1 << SPIF)) == 0)
++#define SPI_DATA SPDR
++
++void set_clkm(void);
++void board_init(void);
++
++void led_red(bool on);
++void led_green(bool on);
++
++void spi_begin(void);
++void spi_off(void);
++void spi_init(void);
++
++#ifdef DEBUG
++void printStatus(void);
++#define PRINT_STATUS() printStatus()
++#endif
++
++#endif /* !BOARD_HULUSB_H */
+diff --git a/atusb/board_rzusb.c b/atusb/board_rzusb.c
+new file mode 100644
+index 0000000..e83d6fa
+--- /dev/null
++++ b/atusb/board_rzusb.c
+@@ -0,0 +1,169 @@
++/*
++ * fw/board_rzusb.c - RZUSB Board-specific functions (for boot loader and application)
++ *
++ * Written 2016 by Stefan Schmidt
++ * Copyright 2016 Stefan Schmidt
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <avr/io.h>
++#include <avr/interrupt.h>
++#include <avr/boot.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#include "usb.h"
++#include "at86rf230.h"
++#include "board.h"
++#include "spi.h"
++#include "usb/usb.h"
++
++static bool spi_initialized = 0;
++
++void reset_rf(void)
++{
++ /* set up all the outputs; default port value is 0 */
++
++ DDRB = 0;
++ DDRC = 0;
++ DDRD = 0;
++ PORTB = 0;
++ PORTC = 0;
++ PORTD = 0;
++
++ OUT(LED);
++ OUT(nRST_RF); /* this also resets the transceiver */
++ OUT(SLP_TR);
++
++ spi_init();
++
++ /* AT86RF231 data sheet, 12.4.13, reset pulse width: 625 ns (min) */
++
++ CLR(nRST_RF);
++ _delay_us(2);
++ SET(nRST_RF);
++
++ /* 12.4.14: SPI access latency after reset: 625 ns (min) */
++
++ _delay_us(2);
++
++ /* we must restore TRX_CTRL_0 after each reset (9.6.4) */
++
++ set_clkm();
++}
++
++void led(bool on)
++{
++ if (on)
++ SET(LED);
++ else
++ CLR(LED);
++}
++
++void set_clkm(void)
++{
++ /* switch CLKM to 8 MHz */
++
++ /*
++ * @@@ Note: Atmel advise against changing the external clock in
++ * mid-flight. We should therefore switch to the RC clock first, then
++ * crank up the external clock, and finally switch back to the external
++ * clock. The clock switching procedure is described in the ATmega32U2
++ * data sheet in secton 8.2.2.
++ */
++ spi_begin();
++ spi_send(AT86RF230_REG_WRITE | REG_TRX_CTRL_0);
++ spi_send(0x10);
++ spi_end();
++
++ /* TX_AUTO_CRC_ON, default disabled */
++ spi_begin();
++ spi_send(AT86RF230_REG_WRITE | 0x05);
++ spi_send(0x80);
++ spi_end();
++}
++
++void board_init(void)
++{
++ /* Disable the watchdog timer */
++
++ MCUSR = 0; /* Remove override */
++ WDTCSR |= 1 << WDCE; /* Enable change */
++ WDTCSR = 1 << WDCE; /* Disable watchdog while still enabling
++ change */
++
++ CLKPR = 1 << CLKPCE;
++ /* We start with a 16 MHz/8 clock. Put the prescaler to 2. */
++ CLKPR = 1 << CLKPS0;
++
++ get_sernum();
++}
++
++void spi_begin(void)
++{
++ if (!spi_initialized)
++ spi_init();
++ CLR(nSS);
++}
++
++void spi_off(void)
++{
++ spi_initialized = 0;
++ SPCR &= ~(1 << SPE);
++}
++
++void spi_init(void)
++{
++ SET(nSS);
++ OUT(SCLK);
++ OUT(MOSI);
++ OUT(nSS);
++ IN(MISO);
++
++ SPCR = (1 << SPE) | (1 << MSTR);
++ SPSR = (1 << SPI2X);
++
++ spi_initialized = 1;
++}
++
++void usb_init(void)
++{
++ USBCON |= 1 << FRZCLK; /* freeze the clock */
++
++ /* enable the PLL and wait for it to lock */
++ /* TODO sheet page 50 For Atmel AT90USB128x only. Do not use with Atmel AT90USB64x. */
++ /* FOR 8 XTAL Mhz only!!! */
++ PLLCSR = ((1 << PLLP1) | (1 << PLLP0));
++ PLLCSR |= 1 << PLLE;
++ while (!(PLLCSR & (1 << PLOCK)));
++
++ UHWCON |= (1 << UVREGE);
++
++ USBCON &= ~((1 << USBE) | (1 << OTGPADE)); /* reset the controller */
++ USBCON |= ((1 << USBE) | (1 << OTGPADE));
++
++ USBCON &= ~(1 << FRZCLK); /* thaw the clock */
++
++ UDCON &= ~(1 << DETACH); /* attach the pull-up */
++ UDIEN = 1 << EORSTE; /* enable device interrupts */
++// UDCON |= 1 << RSTCPU; /* reset CPU on bus reset */
++
++ ep_init();
++}
++
++void board_app_init(void)
++{
++ /* enable timer input capture 1, trigger on rising edge */
++ TCCR1B = (1 << ICES1);
++ TIFR1 = (1 << ICF1);
++ TIMSK1 = (1 << ICIE1);
++}
+diff --git a/atusb/board_rzusb.h b/atusb/board_rzusb.h
+new file mode 100644
+index 0000000..c2e518f
+--- /dev/null
++++ b/atusb/board_rzusb.h
+@@ -0,0 +1,48 @@
++/*
++ * fw/board_rzusb.h - RZUSB Board-specific functions and definitions
++ *
++ * Written 2016 by Stefan Schmidt
++ * Copyright 2016 Stefan Schmidt
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef BOARD_RZUSB_H
++#define BOARD_RZUSB_H
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#define LED_PORT D
++#define LED_BIT 7
++#define nRST_RF_PORT B
++#define nRST_RF_BIT 5
++#define SLP_TR_PORT B
++#define SLP_TR_BIT 4
++
++#define SCLK_PORT B
++#define SCLK_BIT 1
++#define MOSI_PORT B
++#define MOSI_BIT 2
++
++#define MISO_PORT B
++#define MISO_BIT 3
++#define nSS_PORT B
++#define nSS_BIT 0
++#define IRQ_RF_PORT D
++#define IRQ_RF_BIT 4
++
++#define SPI_WAIT_DONE() while ((SPSR & (1 << SPIF)) == 0)
++#define SPI_DATA SPDR
++
++void set_clkm(void);
++void board_init(void);
++
++void spi_begin(void);
++void spi_off(void);
++void spi_init(void);
++
++#endif /* !BOARD_H */
+diff --git a/atusb/boot.c b/atusb/boot.c
+new file mode 100644
+index 0000000..6826ac6
+--- /dev/null
++++ b/atusb/boot.c
+@@ -0,0 +1,77 @@
++/*
++ * fw/boot.c - DFU boot loader for ATUSB
++ *
++ * Written 2008-2011 by Werner Almesberger
++ * Copyright 2008-2011 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdint.h>
++
++#include <avr/io.h>
++#include <avr/interrupt.h>
++#include <avr/pgmspace.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#include "usb.h"
++#include "dfu.h"
++
++#include "board.h"
++#include "spi.h"
++#include "atusb/ep0.h"
++
++
++#define MS_TO_LOOPS(ms) ((uint32_t) (ms)*335)
++
++
++static void (*run_payload)(void) = 0;
++
++
++int main(void)
++{
++ /*
++ * pgm_read_byte gets cached and there doesn't seem to be any other
++ * way to dissuade gcc from doing this.
++ */
++ volatile int zero = 0;
++ uint32_t loop = 0;
++
++ board_init();
++ reset_rf();
++
++ /* now we should be at 8 MHz */
++
++ usb_init();
++ dfu_init();
++
++ /* move interrupt vectors to the boot loader */
++ MCUCR = 1 << IVCE;
++ MCUCR = 1 << IVSEL;
++
++ sei();
++
++ led(1);
++
++ while (loop != MS_TO_LOOPS(2500)) {
++ if (dfu.state == dfuIDLE && pgm_read_byte(zero) != 0xff)
++ loop++;
++ else
++ loop = 0;
++ }
++
++ led(0);
++
++ cli();
++
++ usb_reset();
++ run_payload();
++
++ while (1); /* not reached */
++}
+diff --git a/atusb/descr.c b/atusb/descr.c
+new file mode 100644
+index 0000000..f96b0ee
+--- /dev/null
++++ b/atusb/descr.c
+@@ -0,0 +1,104 @@
++/*
++ * fw/descr.c - USB descriptors
++ *
++ * Written 2008-2011, 2014 by Werner Almesberger
++ * Copyright 2008-2011, 2014 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include "usb.h"
++#include "dfu.h"
++#include "board.h"
++
++
++#define LE(x) ((uint16_t) (x) & 0xff), ((uint16_t) (x) >> 8)
++
++/*
++ * Device descriptor
++ */
++
++const uint8_t device_descriptor[18] = {
++ 18, /* bLength */
++ USB_DT_DEVICE, /* bDescriptorType */
++ LE(0x200), /* bcdUSB */
++ USB_CLASS_VENDOR_SPEC, /* bDeviceClass */
++ 0x00, /* bDeviceSubClass */
++ 0x00, /* bDeviceProtocol */
++ EP0_SIZE, /* bMaxPacketSize */
++ LE(USB_VENDOR), /* idVendor */
++ LE(USB_PRODUCT), /* idProduct */
++ LE(0x0001), /* bcdDevice */
++ 0, /* iManufacturer */
++ 0, /* iProduct */
++#ifdef HAS_BOARD_SERNUM
++ 1, /* iSerialNumber */
++#else
++ 0, /* iSerialNumber */
++#endif
++ 1 /* bNumConfigurations */
++};
++
++
++/*
++ * Our configuration
++ *
++ * We're always bus-powered.
++ */
++
++const uint8_t config_descriptor[] = {
++ 9, /* bLength */
++ USB_DT_CONFIG, /* bDescriptorType */
++#if 0
++ LE(9+9+7+7), /* wTotalLength */
++#else
++ LE(9+9+7+9), /* wTotalLength */
++#endif
++ 2, /* bNumInterfaces */
++ 1, /* bConfigurationValue (> 0 !) */
++ 0, /* iConfiguration */
++ USB_ATTR_BUS_POWERED, /* bmAttributes */
++ ((BOARD_MAX_mA)+1)/2, /* bMaxPower */
++
++ /* Interface #0 */
++
++ 9, /* bLength */
++ USB_DT_INTERFACE, /* bDescriptorType */
++ 0, /* bInterfaceNumber */
++ 0, /* bAlternateSetting */
++ 1, /* bNumEndpoints */
++ USB_CLASS_VENDOR_SPEC, /* bInterfaceClass */
++ 0, /* bInterfaceSubClass */
++ 0, /* bInterfaceProtocol */
++ 0, /* iInterface */
++
++#if 0
++ /* EP OUT */
++
++ 7, /* bLength */
++ USB_DT_ENDPOINT, /* bDescriptorType */
++ 0x01, /* bEndPointAddress */
++ 0x02, /* bmAttributes (bulk) */
++ LE(EP1_SIZE), /* wMaxPacketSize */
++ 0, /* bInterval */
++#endif
++
++#if 1
++ /* EP IN */
++
++ 7, /* bLength */
++ USB_DT_ENDPOINT, /* bDescriptorType */
++ 0x81, /* bEndPointAddress */
++ 0x02, /* bmAttributes (bulk) */
++ LE(EP1_SIZE), /* wMaxPacketSize */
++ 0, /* bInterval */
++#endif
++
++ /* Interface #1 */
++
++ DFU_ITF_DESCR(1, 0, dfu_proto_runtime, 0)
++};
+diff --git a/atusb/ep0.c b/atusb/ep0.c
+new file mode 100644
+index 0000000..fa43f3b
+--- /dev/null
++++ b/atusb/ep0.c
+@@ -0,0 +1,338 @@
++/*
++ * fw/ep0.c - EP0 extension protocol
++ *
++ * Written 2008-2011, 2013 by Werner Almesberger
++ * Copyright 2008-2011, 2013 Werner Almesberger
++ * Copyright 2015-2016 Stefan Schmidt
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++#include <string.h>
++
++#include <avr/io.h>
++#include <avr/eeprom.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#include "usb.h"
++#include "dfu.h"
++
++#include "at86rf230.h"
++#include "atusb/ep0.h"
++#include "version.h"
++#include "board.h"
++#include "sernum.h"
++#include "spi.h"
++#include "mac.h"
++
++#ifdef ATUSB
++#define HW_TYPE ATUSB_HW_TYPE_110131
++#endif
++
++#ifdef RZUSB
++#define HW_TYPE ATUSB_HW_TYPE_RZUSB
++#endif
++
++#ifdef HULUSB
++#define HW_TYPE ATUSB_HW_TYPE_HULUSB
++#endif
++
++#ifdef DEBUG
++#include "uart.h"
++#include <stdio.h>
++#define debug(FORMAT,args...) printf(FORMAT,##args)
++#define error(FORMAT,args...) printf(FORMAT,##args)
++#else
++#define debug(...)
++#define error(...)
++#endif
++
++
++static const uint8_t id[] = { EP0ATUSB_MAJOR, EP0ATUSB_MINOR, HW_TYPE };
++static uint8_t buf[MAX_PSDU+3]; /* command, PHDR, and LQI */
++static uint8_t size;
++
++
++static void do_eeprom_write(void *user)
++{
++ int i;
++
++ for (i = 0; i < size; i++)
++ eeprom_update_byte((uint8_t*)i, buf[i]);
++}
++
++static void do_buf_write(void *user)
++{
++ uint8_t i;
++
++ spi_begin();
++ for (i = 0; i != size; i++)
++ spi_send(buf[i]);
++ spi_end();
++}
++
++
++#define BUILD_OFFSET 7 /* '#' plus "65535" plus ' ' */
++
++
++static bool my_setup(const struct setup_request *setup)
++{
++ uint16_t req = setup->bmRequestType | setup->bRequest << 8;
++ unsigned tmp;
++ uint8_t i;
++ uint64_t tmp64;
++
++ switch (req) {
++ case ATUSB_FROM_DEV(ATUSB_ID):
++ debug("ATUSB_ID\n");
++ if (setup->wLength > 3)
++ return 0;
++ usb_send(&eps[0], id, setup->wLength, NULL, NULL);
++ return 1;
++ case ATUSB_FROM_DEV(ATUSB_BUILD):
++ debug("ATUSB_BUILD\n");
++ tmp = build_number;
++ for (i = BUILD_OFFSET-2; tmp; i--) {
++ buf[i] = (tmp % 10)+'0';
++ tmp /= 10;
++ }
++ buf[i] = '#';
++ buf[BUILD_OFFSET-1] = ' ';
++ for (size = 0; build_date[size]; size++)
++ buf[BUILD_OFFSET+size] = build_date[size];
++ size += BUILD_OFFSET-i;
++ if (size > setup->wLength)
++ return 0;
++ usb_send(&eps[0], buf+i, size, NULL, NULL);
++ return 1;
++
++ case ATUSB_TO_DEV(ATUSB_RESET):
++ debug("ATUSB_RESET\n");
++ reset_cpu();
++ while (1);
++
++ case ATUSB_TO_DEV(ATUSB_RF_RESET):
++ debug("ATUSB_RF_RESET\n");
++ reset_rf();
++ mac_reset();
++ //ep_send_zlp(EP_CTRL);
++ return 1;
++
++ case ATUSB_FROM_DEV(ATUSB_POLL_INT):
++ debug("ATUSB_POLL_INT\n");
++ if (setup->wLength < 1)
++ return 0;
++ *buf = read_irq();
++ usb_send(&eps[0], buf, 1, NULL, NULL);
++ return 1;
++
++ case ATUSB_FROM_DEV(ATUSB_TIMER):
++ debug("ATUSB_TIMER\n");
++ size = setup->wLength;
++ if (size > sizeof(tmp64))
++ size = sizeof(tmp64);
++ tmp64 = timer_read();
++ memcpy(buf, &tmp64, sizeof(tmp64));
++ usb_send(&eps[0], buf, size, NULL, NULL);
++ return 1;
++
++ case ATUSB_FROM_DEV(ATUSB_GPIO):
++ debug("ATUSB_GPIO\n");
++ if (setup->wLength < 3)
++ return 0;
++ if (!gpio(setup->wIndex, setup->wValue, setup->wValue >> 8,
++ setup->wIndex >> 8, buf))
++ return 0;
++ usb_send(&eps[0], buf, 3, NULL, NULL);
++ return 1;
++ case ATUSB_TO_DEV(ATUSB_GPIO_CLEANUP):
++ gpio_cleanup();
++ return 1;
++
++ case ATUSB_TO_DEV(ATUSB_SLP_TR):
++ debug("ATUSB_SLP_TR\n");
++ slp_tr();
++ return 1;
++
++ case ATUSB_TO_DEV(ATUSB_REG_WRITE):
++ debug("ATUSB_REG_WRITE\n");
++ spi_begin();
++ spi_send(AT86RF230_REG_WRITE | setup->wIndex);
++ spi_send(setup->wValue);
++ spi_end();
++ //ep_send_zlp(EP_CTRL);
++ return 1;
++ case ATUSB_FROM_DEV(ATUSB_REG_READ):
++ debug("ATUSB_REG_READ\n");
++ spi_begin();
++ spi_send(AT86RF230_REG_READ | setup->wIndex);
++ *buf = spi_recv();
++ spi_end();
++ usb_send(&eps[0], buf, 1, NULL, NULL);
++ return 1;
++
++ case ATUSB_TO_DEV(ATUSB_BUF_WRITE):
++ debug("ATUSB_BUF_WRITE\n");
++ if (setup->wLength < 1)
++ return 0;
++ if (setup->wLength > MAX_PSDU)
++ return 0;
++ buf[0] = AT86RF230_BUF_WRITE;
++ buf[1] = setup->wLength;
++ size = setup->wLength+2;
++ usb_recv(&eps[0], buf+2, setup->wLength, do_buf_write, NULL);
++ return 1;
++ case ATUSB_FROM_DEV(ATUSB_BUF_READ):
++ debug("ATUSB_BUF_READ\n");
++ if (setup->wLength < 2) /* PHR+LQI */
++ return 0;
++ if (setup->wLength > MAX_PSDU+2) /* PHR+PSDU+LQI */
++ return 0;
++ spi_begin();
++ spi_send(AT86RF230_BUF_READ);
++ size = spi_recv();
++ if (size >= setup->wLength)
++ size = setup->wLength-1;
++ for (i = 0; i != size+1; i++)
++ buf[i] = spi_recv();
++ spi_end();
++ usb_send(&eps[0], buf, size+1, NULL, NULL);
++ return 1;
++
++ case ATUSB_TO_DEV(ATUSB_SRAM_WRITE):
++ debug("ATUSB_SRAM_WRITE\n");
++ if (setup->wIndex > SRAM_SIZE)
++ return 0;
++ if (setup->wIndex+setup->wLength > SRAM_SIZE)
++ return 0;
++ buf[0] = AT86RF230_SRAM_WRITE;
++ buf[1] = setup->wIndex;
++ size = setup->wLength+2;
++ usb_recv(&eps[0], buf+2, setup->wLength, do_buf_write, NULL);
++ return 1;
++ case ATUSB_FROM_DEV(ATUSB_SRAM_READ):
++ debug("ATUSB_SRAM_READ\n");
++ if (setup->wIndex > SRAM_SIZE)
++ return 0;
++ if (setup->wIndex+setup->wLength > SRAM_SIZE)
++ return 0;
++ spi_begin();
++ spi_send(AT86RF230_SRAM_READ);
++ spi_send(setup->wIndex);
++ for (i = 0; i != setup->wLength; i++)
++ buf[i] = spi_recv();
++ spi_end();
++ usb_send(&eps[0], buf, setup->wLength, NULL, NULL);
++ return 1;
++
++ case ATUSB_TO_DEV(ATUSB_SPI_WRITE):
++ size = setup->wLength+2;
++ if (size > sizeof(buf))
++ return 0;
++ buf[0] = setup->wValue;
++ buf[1] = setup->wIndex;
++ if (setup->wLength)
++ usb_recv(&eps[0], buf+2, setup->wLength,
++ do_buf_write, NULL);
++ else
++ do_buf_write(NULL);
++ return 1;
++ case ATUSB_FROM_DEV(ATUSB_SPI_WRITE2_SYNC):
++ spi_begin();
++ spi_send(setup->wValue);
++ spi_send(setup->wIndex);
++ spi_end();
++ buf[0] = irq_serial;
++ if (setup->wLength)
++ usb_send(&eps[0], buf, 1, NULL, NULL);
++ return 1;
++
++ case ATUSB_FROM_DEV(ATUSB_SPI_READ1):
++ case ATUSB_FROM_DEV(ATUSB_SPI_READ2):
++ spi_begin();
++ spi_send(setup->wValue);
++ if (req == ATUSB_FROM_DEV(ATUSB_SPI_READ2))
++ spi_send(setup->wIndex);
++ for (i = 0; i != setup->wLength; i++)
++ buf[i] = spi_recv();
++ spi_end();
++ usb_send(&eps[0], buf, setup->wLength, NULL, NULL);
++ return 1;
++
++ case ATUSB_TO_DEV(ATUSB_RX_MODE):
++ return mac_rx(setup->wValue);
++ case ATUSB_TO_DEV(ATUSB_TX):
++ return mac_tx(setup->wValue, setup->wIndex, setup->wLength);
++ case ATUSB_TO_DEV(ATUSB_EUI64_WRITE):
++ debug("ATUSB_EUI64_WRITE\n");
++ usb_recv(&eps[0], buf, setup->wLength, do_eeprom_write, NULL);
++ _delay_ms(100);
++ reset_cpu();
++ return 1;
++
++ case ATUSB_FROM_DEV(ATUSB_EUI64_READ):
++ debug("ATUSB_EUI64_READ\n");
++ eeprom_read_block(buf, (const void*)0, 8);
++ usb_send(&eps[0], buf, 8, NULL, NULL);
++ return 1;
++
++ default:
++ error("Unrecognized SETUP: 0x%02x 0x%02x ...\n",
++ setup->bmRequestType, setup->bRequest);
++ return 0;
++ }
++}
++
++
++static bool my_dfu_setup(const struct setup_request *setup)
++{
++ switch (setup->bmRequestType | setup->bRequest << 8) {
++ case DFU_TO_DEV(DFU_DETACH):
++ /* @@@ should use wTimeout */
++ dfu.state = appDETACH;
++ return 1;
++ default:
++ return dfu_setup_common(setup);
++ }
++}
++
++
++static void my_set_interface(int nth)
++{
++ if (nth) {
++ user_setup = my_dfu_setup;
++ user_get_descriptor = dfu_my_descr;
++ dfu.state = appIDLE;
++ } else {
++ user_setup = my_setup;
++ user_get_descriptor = sernum_get_descr;
++ }
++}
++
++
++static void my_reset(void)
++{
++ if (dfu.state == appDETACH)
++ reset_cpu();
++}
++
++
++void ep0_init(void)
++{
++ user_setup = my_setup;
++ user_set_interface = my_set_interface;
++ my_set_interface(0);
++ user_reset = my_reset;
++}
+diff --git a/atusb/flash.c b/atusb/flash.c
+new file mode 100644
+index 0000000..1f8e59d
+--- /dev/null
++++ b/atusb/flash.c
+@@ -0,0 +1,97 @@
++/*
++ * fw/flash.c - Board-specific flash functions
++ *
++ * Written 2011, 2013-2015 by Werner Almesberger
++ * Copyright 2011, 2013-2015 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <avr/boot.h>
++#include <avr/pgmspace.h>
++
++#include "dfu.h"
++#include "board.h"
++
++
++static uint32_t payload;
++
++
++static void flash_start(void)
++{
++ payload = 0;
++}
++
++
++static bool flash_can_write(uint16_t size)
++{
++ return payload+size <= BOOT_ADDR;
++}
++
++
++static void flash_write(const uint8_t *buf, uint16_t size)
++{
++ static uint8_t last;
++ const uint8_t *p;
++
++ for (p = buf; p != buf+size; p++) {
++ if (!(payload & (SPM_PAGESIZE-1))) {
++ boot_page_erase(payload);
++ boot_spm_busy_wait();
++ }
++
++ if (payload & 1)
++ boot_page_fill(payload, last | (*p << 8));
++ else
++ last = *p;
++ payload++;
++
++ if (!(payload & (SPM_PAGESIZE-1))) {
++ boot_page_write(payload-SPM_PAGESIZE);
++ boot_spm_busy_wait();
++ }
++ }
++}
++
++
++static void flash_end_write(void)
++{
++ if (payload & (SPM_PAGESIZE-1)) {
++ boot_page_write(payload & ~(SPM_PAGESIZE-1));
++ boot_spm_busy_wait();
++ }
++ boot_rww_enable();
++}
++
++
++static uint16_t flash_read(uint8_t *buf, uint16_t size)
++{
++ uint16_t got = 0;
++
++ while (size && payload != (uint32_t) FLASHEND+1) {
++ *buf++ = pgm_read_byte(payload);
++ payload++;
++ size--;
++ got++;
++ }
++ return got;
++}
++
++
++static const struct dfu_flash_ops flash_ops = {
++ .start = flash_start,
++ .can_write = flash_can_write,
++ .write = flash_write,
++ .end_write = flash_end_write,
++ .read = flash_read,
++};
++
++
++const struct dfu_flash_ops *dfu_flash_ops = &flash_ops;
+diff --git a/atusb/include/at86rf230.h b/atusb/include/at86rf230.h
+new file mode 100644
+index 0000000..4c3ae22
+--- /dev/null
++++ b/atusb/include/at86rf230.h
+@@ -0,0 +1,402 @@
++/*
++ * include/at86rf230.h - AT86RF230/AT86RF231 protocol and register definitions
++ *
++ * Written 2008-2011 by Werner Almesberger
++ * Copyright 2008-2011 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#ifndef AT86RF230_H
++#define AT86RF230_H
++
++enum {
++ AT86RF230_REG_WRITE = 0xc0, /* 11... */
++ AT86RF230_REG_READ = 0x80, /* 10... */
++ AT86RF230_BUF_WRITE = 0x60, /* 011... */
++ AT86RF230_BUF_READ = 0x20, /* 001... */
++ AT86RF230_SRAM_WRITE = 0x40, /* 010... */
++ AT86RF230_SRAM_READ = 0x00 /* 000... */
++};
++
++#define MAX_PSDU 127 /* octets, see AT86RF230 manual section 8.1 */
++#define SRAM_SIZE 128
++
++
++/* --- Registers ----------------------------------------------------------- */
++
++enum {
++ REG_TRX_STATUS = 0x01,
++ REG_TRX_STATE = 0x02,
++ REG_TRX_CTRL_0 = 0x03,
++
++ REG_TRX_CTRL_1 = 0x04, /* 231 only */
++
++ REG_PHY_TX_PWR = 0x05,
++ REG_PHY_RSSI = 0x06,
++ REG_PHY_ED_LEVEL = 0x07,
++ REG_PHY_CC_CCA = 0x08,
++ REG_CCA_THRES = 0x09,
++
++ REG_RX_CTRL = 0x0a, /* 231 only */
++ REG_SFD_VALUE = 0x0b, /* 231 only */
++ REG_TRX_CTRL_2 = 0x0c, /* 231 only */
++ REG_ANT_DIV = 0x0d, /* 231 only */
++
++ REG_IRQ_MASK = 0x0e,
++ REG_IRQ_STATUS = 0x0f,
++ REG_VREG_CTRL = 0x10,
++ REG_BATMON = 0x11,
++ REG_XOSC_CTRL = 0x12,
++
++ REG_RX_SYN = 0x15, /* 231 only */
++ REG_XAH_CTRL_1 = 0x17, /* 231 only */
++ REG_FTN_CTRL = 0x18, /* 231 only */
++
++ REG_PLL_CF = 0x1a,
++ REL_PLL_DCU = 0x1b,
++ REG_PART_NUM = 0x1c,
++ REG_VERSION_NUM = 0x1d,
++ REG_MAN_ID_0 = 0x1e,
++ REG_MAN_ID_1 = 0x1f,
++ REG_SHORT_ADDR_0 = 0x20,
++ REG_SHORT_ADDR_1 = 0x21,
++ REG_PAN_ID_0 = 0x22,
++ REG_PAN_ID_1 = 0x23,
++ REG_IEEE_ADDR_0 = 0x24,
++ REG_IEEE_ADDR_1 = 0x25,
++ REG_IEEE_ADDR_2 = 0x26,
++ REG_IEEE_ADDR_3 = 0x27,
++ REG_IEEE_ADDR_4 = 0x28,
++ REG_IEEE_ADDR_5 = 0x29,
++ REG_IEEE_ADDR_6 = 0x2a,
++ REG_IEEE_ADDR_7 = 0x2b,
++
++ REG_XAH_CTRL_0 = 0x2c, /* XAH_CTRL in 230 */
++ REG_CSMA_SEED_0 = 0x2d,
++ REG_CSMA_SEED_1 = 0x2e,
++ REG_CSMA_BE = 0x2f, /* 231 only */
++
++ REG_CONT_TX_0 = 0x36,
++ REG_CONT_TX_1 = 0x3d, /* 230 only */
++};
++
++/* --- TRX_STATUS --- ------------------------------------------------------ */
++
++#define CCA_DONE (1 << 7)
++#define CCA_STATUS (1 << 6)
++
++#define TRX_STATUS_SHIFT 0
++#define TRX_STATUS_MASK 0x1f
++
++enum {
++ TRX_STATUS_P_ON = 0x00, /* reset default */
++ TRX_STATUS_BUSY_RX = 0x01,
++ TRX_STATUS_BUSY_TX = 0x02,
++ TRX_STATUS_RX_ON = 0x06,
++ TRX_STATUS_TRX_OFF = 0x08,
++ TRX_STATUS_PLL_ON = 0x09,
++ TRX_STATUS_SLEEP = 0x0f,
++ TRX_STATUS_BUSY_RX_AACK = 0x11,
++ TRX_STATUS_BUSY_TX_ARET = 0x12,
++ TRX_STATUS_RX_AACK_ON = 0x16,
++ TRX_STATUS_TX_ARET_ON = 0x19,
++ TRX_STATUS_RX_ON_NOCLK = 0x1c,
++ TRX_STATUS_RX_AACK_ON_NOCLK = 0x1d,
++ TRX_STATUS_BUSY_RX_AACK_NOCLK = 0x1e,
++ TRX_STATUS_TRANSITION = 0x1f /* ..._IN_PROGRESS */
++};
++
++/* --- TRX_STATE ----------------------------------------------------------- */
++
++#define TRAC_STATUS_SHIFT 5
++#define TRAC_STATUS_MASK 7
++
++enum {
++ TRAC_STATUS_SUCCESS = 0, /* reset default */
++ TRAC_STATUS_SUCCESS_DATA_PENDING = 1,
++ TRAC_STATUS_SUCCESS_WAIT_FOR_ACK = 2, /* 231 only */
++ TRAC_STATUS_CHANNEL_ACCESS_FAILURE = 3,
++ TRAC_STATUS_NO_ACK = 5,
++ TRAC_STATUS_INVALID = 7
++};
++
++#define TRX_CMD_SHIFT 0
++#define TRX_CMD_MASK 0x1f
++
++enum {
++ TRX_CMD_NOP = 0x00, /* reset default */
++ TRX_CMD_TX_START = 0x02,
++ TRX_CMD_FORCE_TRX_OFF = 0x03,
++ TRX_CMD_FORCE_PLL_ON = 0x04, /* 231 only */
++ TRX_CMD_RX_ON = 0x06,
++ TRX_CMD_TRX_OFF = 0x08,
++ TRX_CMD_PLL_ON = 0x09,
++ TRX_CMD_RX_AACK_ON = 0x16,
++ TRX_CMD_TX_ARET_ON = 0x19,
++};
++
++/* --- TRX_CTRL_0 ---------------------------------------------------------- */
++
++#define PAD_IO_SHIFT 6
++#define PAD_IO_MASK 3
++
++enum {
++ PAD_IO_2mA, /* reset default */
++ PAD_IO_4mA,
++ PAD_IO_6mA,
++ PAD_IO_8mA
++};
++
++#define PAD_IO_CLKM_SHIFT 4
++#define PAD_IO_CLKM_MASK 3
++
++enum {
++ PAD_IO_CLKM_2mA,
++ PAD_IO_CLKM_4mA, /* reset default */
++ PAD_IO_CLKM_5mA,
++ PAD_IO_CLKM_8mA,
++};
++
++#define CLKM_SHA_SEL (1 << 3)
++
++#define CLKM_CTRL_SHIFT 0
++#define CLKM_CTRL_MASK 7
++
++enum {
++ CLKM_CTRL_OFF = 0,
++ CLKM_CTRL_1MHz = 1, /* reset default */
++ CLKM_CTRL_2MHz = 2,
++ CLKM_CTRL_4MHz = 3,
++ CLKM_CTRL_8MHz = 4,
++ CLKM_CTRL_16MHz = 5
++};
++
++/* --- TRX_CTRL_1 (231 only) ----------------------------------------------- */
++
++#define PA_EXT_EN (1 << 7)
++#define IRQ_2_EXT_EN (1 << 6)
++#define TX_AUTO_CRC_ON (1 << 5) /* 231 location */
++#define RX_BL_CTRL (1 << 4)
++
++#define SPI_CMD_MODE_SHIFT 2
++#define SPI_CMD_MODE_MASK 3
++
++enum {
++ SPI_CMD_MODE_EMPTY = 0, /* reset default */
++ SPI_CMD_MODE_TRX_STATUS = 1,
++ SPI_CMD_MODE_PHY_RSSI = 2,
++ SPI_CMD_MODE_IRQ_STATUS = 3,
++};
++
++#define IRQ_MASK_MODE (1 << 1)
++#define IRQ_POLARITY (1 << 0)
++
++/* --- PHY_TX_PWR ---------------------------------------------------------- */
++
++#define TX_AUTO_CRC_ON_230 (1 << 7) /* 230 location */
++
++#define PA_BUF_LT_SHIFT 6
++#define PA_BUF_LT_MASK 3
++
++#define PA_LT_SHIFT 4
++#define PA_LT_MASK 3
++
++#define TX_PWR_SHIFT 0
++#define TX_PWR_MASK 0x0f
++
++/* --- PHY_RSSI ------------------------------------------------------------ */
++
++#define RX_CRC_VALID (1 << 7)
++
++#define RND_VALUE_SHIFT 5 /* 231 only */
++#define RND_VALUE_MASK 3
++
++#define RSSI_SHIFT 0
++#define RSSI_MASK 0x1f
++
++/* --- PHY_CC_CCA ---------------------------------------------------------- */
++
++#define CCA_REQUEST (1 << 7)
++
++#define CCA_MODE_SHIFT 5
++#define CCA_MODE_MASK 3
++
++enum {
++ CCA_MODE_CARRIER_OR_ENERGY = 0, /* 231 only */
++ CCA_MODE_ENERGY = 1, /* reset default */
++ CCA_MODE_CARRIER = 2,
++ CCA_MODE_CARRIER_AND_ENERGY = 3
++};
++
++#define CHANNEL_SHIFT 0
++#define CHANNEL_MASK 0x1f
++
++/* --- CCA_THRES ----------------------------------------------------------- */
++
++#define CCA_ED_THRES_SHIFT 0
++#define CCA_ED_THRES_MASK 0x0f
++
++/* --- RX_CTRL (231 only) -------------------------------------------------- */
++
++#define PDT_THRES_SHIFT 0
++#define PDT_THRES_MASK 0x0f
++
++enum {
++ PDT_THRES_DEFAULT = 0x07, /* reset default */
++ PDT_THRES_DIVERSITY = 0x03,
++};
++
++/* --- TRX_CTRL_2 (231 only) ----------------------------------------------- */
++
++#define RX_SAFE_MODE (1 << 7)
++
++#define OQPSK_DATA_RATE_SHIFT 0
++#define OQPSK_DATA_RATE_MASK 3
++
++enum {
++ OQPSK_DATA_RATE_250 = 0, /* reset default */
++ OQPSK_DATA_RATE_500 = 1,
++ OQPSK_DATA_RATE_1000 = 2,
++ OQPSK_DATA_RATE_2000 = 3
++};
++
++/* --- ANT_DIV (231 only) -------------------------------------------------- */
++
++#define ANT_SEL (1 << 7)
++#define ANT_DIV_EN (1 << 3)
++#define ANT_EXT_SW_EN (1 << 2)
++
++#define ANT_CTRL_SHIFT 0
++#define ANT_CTRL_MASK 3
++
++enum {
++ ANT_CTRL_ANT_0 = 1,
++ ANT_CTRL_ANT_1 = 2,
++ ANT_CTRL_NODIV = 3, /* reset default */
++};
++
++/* --- IRQ_MASK/IRQ_STATUS ------------------------------------------------- */
++
++enum {
++ IRQ_PLL_LOCK = 1 << 0,
++ IRQ_PLL_UNLOCK = 1 << 1,
++ IRQ_RX_START = 1 << 2,
++ IRQ_TRX_END = 1 << 3,
++ IRQ_CCA_ED_DONE = 1 << 4, /* 231 only */
++ IRQ_AMI = 1 << 5, /* 231 only */
++ IRQ_TRX_UR = 1 << 6,
++ IRQ_BAT_LOW = 1 << 7
++};
++
++/* --- VREG_CTRL ----------------------------------------------------------- */
++
++#define AVREG_EXT (1 << 7)
++#define AVDD_OK (1 << 6)
++#define DVREG_EXT (1 << 3)
++#define DVDD_OK (1 << 2)
++
++/* --- BATMON -------------------------------------------------------------- */
++
++#define BATMON_OK (1 << 5)
++#define BATMON_HR (1 << 4)
++
++#define BATMON_VTH_SHIFT 0
++#define BATMON_VTH_MASK 0x0f
++
++/* --- XOSC_CTRL ----------------------------------------------------------- */
++
++#define XTAL_MODE_SHIFT 4
++#define XTAL_MODE_MASK 0x0f
++
++enum {
++ XTAL_MODE_OFF = 0x0, /* 230 only */
++ XTAL_MODE_EXT = 0x4,
++ XTAL_MODE_INT = 0xf /* reset default */
++};
++
++#define XTAL_TRIM_SHIFT 4
++#define XTAL_TRIM_MASK 0x0f
++
++/* --- RX_SYN (231 only) --------------------------------------------------- */
++
++#define RX_PDT_DIS (1 << 7)
++
++#define RX_PDT_LEVEL_SHIFT 0
++#define RX_PDT_LEVEL_MASK 0xf
++
++/* --- XAH_CTRL_1 (231 only) ----------------------------------------------- */
++
++#define AACK_FLTR_RES_FT (1 << 5)
++#define AACK_UPLD_RES_FT (1 << 4)
++#define AACK_ACK_TIME (1 << 2)
++#define AACK_PROM_MODE (1 << 1)
++
++/* --- FTN_CTRL (231 only) ------------------------------------------------- */
++
++#define FTN_START (1 << 7)
++
++/* --- PLL_CF -------------------------------------------------------------- */
++
++#define PLL_CF_START (1 << 7)
++
++/* --- PLL_DCU ------------------------------------------------------------- */
++
++#define PLL_DCU_START (1 << 7)
++
++/* --- XAH_CTRL_0 (XAH_CTRL in 230) ---------------------------------------- */
++
++#define MAX_FRAME_RETRIES_SHIFT 4
++#define MAX_FRAME_RETRIES_MASK 0x0f
++
++#define MAX_CSMA_RETRIES_SHIFT 1
++#define MAX_CSMA_RETRIES_MASK 0x07
++
++#define SLOTTED_OPERATION (1 << 0) /* 231 only */
++
++/* --- CSMA_SEED_1 --------------------------------------------------------- */
++
++#define MIN_BE_SHIFT_230 6 /* 230 location */
++#define MIN_BE_MASK_230 3
++
++#define AACK_FVN_MODE_SHIFT 6 /* 231 only */
++#define AACK_FVN_MODE_MASK 3
++
++enum {
++ AACK_FVN_MODE_0 = 0,
++ AACK_FVN_MODE_01 = 1, /* reset default */
++ AACK_FVN_MODE_012 = 2,
++ AACK_FVN_MODE_ANY = 3
++};
++
++#define AACK_SET_PD (1 << 5)
++#define AACK_DIS_ACK (1 << 4) /* 231 only */
++#define I_AM_COORD (1 << 3)
++
++#define CSMA_SEED_1_SHIFT 0
++#define CSMA_SEED_1_MASK 7
++
++/* --- CSMA_BE ------------------------------------------------------------- */
++
++#define MAX_BE_SHIFT 4
++#define MAX_BE_MASK 0x0f
++
++#define MIN_BE_SHIFT 0 /* 231 location */
++#define MIN_BE_MASK 0x0f
++
++/* --- REG_CONT_TX_0 ------------------------------------------------------- */
++
++#define CONT_TX_MAGIC 0x0f
++
++/* --- REG_CONT_TX_1 (230 only) -------------------------------------------- */
++
++#define CONT_TX_MOD 0x00 /* modulated */
++#define CONT_TX_M2M 0x10 /* f_CH-2 MHz */
++#define CONT_TX_M500K 0x80 /* f_CH-0.5 MHz */
++#define CONT_TX_P500K 0xc0 /* f_CH+0.5 MHz */
++
++#endif /* !AT86RF230_H */
+diff --git a/atusb/include/atusb/atusb.h b/atusb/include/atusb/atusb.h
+new file mode 100644
+index 0000000..555d14b
+--- /dev/null
++++ b/atusb/include/atusb/atusb.h
+@@ -0,0 +1,97 @@
++/*
++ * atusb.h - Definitions shared between kernel and ATUSB firmware
++ *
++ * Written 2013 by Werner Almesberger <werner@almesberger.net>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation, version 2, or
++ * (at your option) any later version.
++ *
++ * This file should be identical for kernel and firmware.
++ * Kernel: drivers/net/ieee802154/atusb.h
++ * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
++ */
++
++#ifndef _ATUSB_H
++#define _ATUSB_H
++
++#define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/
++#define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
++ /* -- - - */
++
++#define ATUSB_BUILD_SIZE 256 /* maximum build version/date message length */
++
++/* Commands to our device. Make sure this is synced with the firmware */
++enum atusb_requests {
++ ATUSB_ID = 0x00, /* system status/control grp */
++ ATUSB_BUILD,
++ ATUSB_RESET,
++ ATUSB_RF_RESET = 0x10, /* debug/test group */
++ ATUSB_POLL_INT,
++ ATUSB_TEST, /* atusb-sil only */
++ ATUSB_TIMER,
++ ATUSB_GPIO,
++ ATUSB_SLP_TR,
++ ATUSB_GPIO_CLEANUP,
++ ATUSB_REG_WRITE = 0x20, /* transceiver group */
++ ATUSB_REG_READ,
++ ATUSB_BUF_WRITE,
++ ATUSB_BUF_READ,
++ ATUSB_SRAM_WRITE,
++ ATUSB_SRAM_READ,
++ ATUSB_SPI_WRITE = 0x30, /* SPI group */
++ ATUSB_SPI_READ1,
++ ATUSB_SPI_READ2,
++ ATUSB_SPI_WRITE2_SYNC,
++ ATUSB_RX_MODE = 0x40, /* HardMAC group */
++ ATUSB_TX,
++ ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */
++ ATUSB_EUI64_READ,
++};
++
++enum {
++ ATUSB_HW_TYPE_100813, /* 2010-08-13 */
++ ATUSB_HW_TYPE_101216, /* 2010-12-16 */
++ ATUSB_HW_TYPE_110131, /* 2011-01-31, ATmega32U2-based */
++ ATUSB_HW_TYPE_RZUSB, /* Atmel Raven USB dongle with at86rf230 */
++ ATUSB_HW_TYPE_HULUSB, /* Busware HUL USB dongle with at86rf212 */
++};
++
++/*
++ * Direction bRequest wValue wIndex wLength
++ *
++ * ->host ATUSB_ID - - 3
++ * ->host ATUSB_BUILD - - #bytes
++ * host-> ATUSB_RESET - - 0
++ *
++ * host-> ATUSB_RF_RESET - - 0
++ * ->host ATUSB_POLL_INT - - 1
++ * host-> ATUSB_TEST - - 0
++ * ->host ATUSB_TIMER - - #bytes (6)
++ * ->host ATUSB_GPIO dir+data mask+p# 3
++ * host-> ATUSB_SLP_TR - - 0
++ * host-> ATUSB_GPIO_CLEANUP - - 0
++ *
++ * host-> ATUSB_REG_WRITE value addr 0
++ * ->host ATUSB_REG_READ - addr 1
++ * host-> ATUSB_BUF_WRITE - - #bytes
++ * ->host ATUSB_BUF_READ - - #bytes
++ * host-> ATUSB_SRAM_WRITE - addr #bytes
++ * ->host ATUSB_SRAM_READ - addr #bytes
++ *
++ * host-> ATUSB_SPI_WRITE byte0 byte1 #bytes
++ * ->host ATUSB_SPI_READ1 byte0 - #bytes
++ * ->host ATUSB_SPI_READ2 byte0 byte1 #bytes
++ * ->host ATUSB_SPI_WRITE2_SYNC byte0 byte1 0/1
++ *
++ * host-> ATUSB_RX_MODE on - 0
++ * host-> ATUSB_TX flags ack_seq #bytes
++ * host-> ATUSB_EUI64_WRITE - - #bytes (8)
++ * ->host ATUSB_EUI64_READ - - #bytes (8)
++ */
++
++#define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN)
++#define ATUSB_REQ_TO_DEV (USB_TYPE_VENDOR | USB_DIR_OUT)
++
++#endif /* !_ATUSB_H */
+diff --git a/atusb/include/atusb/ep0.h b/atusb/include/atusb/ep0.h
+new file mode 100644
+index 0000000..7777345
+--- /dev/null
++++ b/atusb/include/atusb/ep0.h
+@@ -0,0 +1,64 @@
++/*
++ * include/atusb/ep0.h - EP0 extension protocol
++ *
++ * Written 2008-2011, 2013 by Werner Almesberger
++ * Copyright 2008-2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#ifndef EP0_H
++#define EP0_H
++
++#include <atusb/atusb.h>
++
++
++/*
++ * EP0 protocol:
++ *
++ * 0.0 initial release
++ * 0.1 addition of ATUSB_TEST
++ * 0.2 First public release
++ * 0.3 ATUSB_EUI64_READ/WRITE for permanent EUI64 handling
++ * Support to run the firmware on Atmel Raven USB dongles
++ * Remove FCS frame check from firmware and leave it to the driver
++ * Use extended operation mode for TX for automatic ACK handling
++ */
++
++#define EP0ATUSB_MAJOR 0 /* EP0 protocol, major revision */
++#define EP0ATUSB_MINOR 3 /* EP0 protocol, minor revision */
++
++
++/*
++ * bmRequestType:
++ *
++ * D7 D6..5 D4...0
++ * | | |
++ * direction (0 = host->dev)
++ * type (2 = vendor)
++ * recipient (0 = device)
++ */
++
++#ifndef USB_TYPE_VENDOR
++#define USB_TYPE_VENDOR 0x40
++#endif
++
++#ifndef USB_DIR_IN
++#define USB_DIR_IN 0x80
++#endif
++
++#ifndef USB_DIR_OUT
++#define USB_DIR_OUT 0x00
++#endif
++
++#define ATUSB_FROM_DEV(req) (ATUSB_REQ_FROM_DEV | (req) << 8)
++#define ATUSB_TO_DEV(req) (ATUSB_REQ_TO_DEV | (req) << 8)
++
++
++void ep0_init(void);
++
++#endif /* !EP0_H */
+diff --git a/atusb/mac.c b/atusb/mac.c
+new file mode 100644
+index 0000000..835002c
+--- /dev/null
++++ b/atusb/mac.c
+@@ -0,0 +1,250 @@
++/*
++ * fw/mac.c - HardMAC functions
++ *
++ * Written 2011, 2013 by Werner Almesberger
++ * Copyright 2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <stddef.h>
++#include <stdbool.h>
++#include <stdint.h>
++
++#include "usb.h"
++
++#include "at86rf230.h"
++#include "spi.h"
++#include "board.h"
++#include "mac.h"
++
++#define RX_BUFS 3
++
++
++bool (*mac_irq)(void) = NULL;
++
++
++static uint8_t rx_buf[RX_BUFS][MAX_PSDU+2]; /* PHDR+payload+LQ */
++static uint8_t tx_buf[MAX_PSDU];
++static uint8_t tx_size = 0;
++static bool txing = 0;
++static bool queued_tx_ack = 0;
++static uint8_t next_seq, this_seq, queued_seq;
++
++
++/* ----- Receive buffer management ----------------------------------------- */
++
++
++static uint8_t rx_in = 0, rx_out = 0;
++
++
++static inline void next_buf(uint8_t *index)
++{
++ *index = (*index+1) % RX_BUFS;
++}
++
++
++/* ----- Interrupt handling ------------------------------------------------ */
++
++
++static void rx_done(void *user);
++static void tx_ack_done(void *user);
++
++
++static void usb_next(void)
++{
++ const uint8_t *buf;
++
++ if (rx_in != rx_out) {
++ buf = rx_buf[rx_out];
++ led(1);
++ usb_send(&eps[1], buf, buf[0]+2, rx_done, NULL);
++ }
++
++ if (queued_tx_ack) {
++ usb_send(&eps[1], &queued_seq, 1, tx_ack_done, NULL);
++ queued_tx_ack = 0;
++ }
++}
++
++
++static void tx_ack_done(void *user)
++{
++ usb_next();
++}
++
++static void rx_done(void *user)
++{
++ led(0);
++ next_buf(&rx_out);
++ usb_next();
++#ifdef AT86RF230
++ /* slap at86rf230 - reduce fragmentation issue */
++ change_state(TRX_STATUS_RX_AACK_ON);
++#endif
++}
++
++
++static void receive_frame(void)
++{
++ uint8_t size;
++ uint8_t *buf;
++
++ spi_begin();
++ spi_io(AT86RF230_BUF_READ);
++
++ size = spi_recv();
++ if (!size || (size & 0x80)) {
++ spi_end();
++ return;
++ }
++
++ buf = rx_buf[rx_in];
++ spi_recv_block(buf+1, size+1);
++ spi_end();
++
++ buf[0] = size;
++ next_buf(&rx_in);
++
++ if (eps[1].state == EP_IDLE)
++ usb_next();
++}
++
++
++static bool handle_irq(void)
++{
++ uint8_t irq;
++
++ irq = reg_read(REG_IRQ_STATUS);
++ if (!(irq & IRQ_TRX_END))
++ return 1;
++
++ if (txing) {
++ if (eps[1].state == EP_IDLE) {
++ usb_send(&eps[1], &this_seq, 1, tx_ack_done, NULL);
++ } else {
++ queued_tx_ack = 1;
++ queued_seq = this_seq;
++ }
++ txing = 0;
++ return 1;
++ }
++
++ /* likely */
++ if (eps[1].state == EP_IDLE || rx_in != rx_out)
++ receive_frame();
++
++ return 1;
++}
++
++
++/* ----- TX/RX ------------------------------------------------------------- */
++
++
++bool mac_rx(int on)
++{
++ if (on) {
++ mac_irq = handle_irq;
++ reg_read(REG_IRQ_STATUS);
++ change_state(TRX_CMD_RX_AACK_ON);
++ } else {
++ mac_irq = NULL;
++ change_state(TRX_CMD_FORCE_TRX_OFF);
++ txing = 0;
++ }
++ return 1;
++}
++
++
++static void do_tx(void *user)
++{
++ uint16_t timeout = 0xffff;
++ uint8_t status;
++ uint8_t i;
++
++ /*
++ * If we time out here, the host driver will time out waiting for the
++ * TRX_END acknowledgement.
++ */
++ do {
++ if (!--timeout)
++ return;
++ status = reg_read(REG_TRX_STATUS) & TRX_STATUS_MASK;
++ }
++ while (status != TRX_STATUS_RX_ON && status != TRX_STATUS_RX_AACK_ON);
++
++#ifdef AT86RF231
++ /*
++ * We use TRX_CMD_FORCE_PLL_ON instead of TRX_CMD_PLL_ON because a new
++ * reception may have begun while we were still working on the previous
++ * one.
++ */
++ reg_write(REG_TRX_STATE, TRX_CMD_FORCE_PLL_ON);
++#endif
++#ifdef AT86RF230
++ /*
++ * at86rf230 doesn't support force change, nevetherless this works
++ * somehow
++ */
++ reg_write(REG_TRX_STATE, TRX_CMD_PLL_ON);
++#endif
++#ifdef AT86RF212
++ /*
++ * We use TRX_CMD_FORCE_PLL_ON instead of TRX_CMD_PLL_ON because a new
++ * reception may have begun while we were still working on the previous
++ * one.
++ */
++ reg_write(REG_TRX_STATE, TRX_CMD_FORCE_PLL_ON);
++#endif
++
++ handle_irq();
++
++ spi_begin();
++ spi_send(AT86RF230_BUF_WRITE);
++ spi_send(tx_size+2); /* CRC */
++ for (i = 0; i != tx_size; i++)
++ spi_send(tx_buf[i]);
++ spi_end();
++
++ change_state(TRX_STATUS_TX_ARET_ON);
++
++ slp_tr();
++
++ txing = 1;
++ this_seq = next_seq;
++
++ /*
++ * Wait until we reach BUSY_TX_ARET, so that we command the transition to
++ * RX_AACK_ON which will be executed upon TX completion.
++ */
++ change_state(TRX_CMD_PLL_ON);
++ change_state(TRX_CMD_RX_AACK_ON);
++}
++
++
++bool mac_tx(uint16_t flags, uint8_t seq, uint16_t len)
++{
++ if (len > MAX_PSDU)
++ return 0;
++ tx_size = len;
++ next_seq = seq;
++ usb_recv(&eps[0], tx_buf, len, do_tx, NULL);
++ return 1;
++}
++
++
++void mac_reset(void)
++{
++ mac_irq = NULL;
++ txing = 0;
++ queued_tx_ack = 0;
++ rx_in = rx_out = 0;
++ next_seq = this_seq = queued_seq = 0;
++
++ /* enable CRC and PHY_RSSI (with RX_CRC_VALID) in SPI status return */
++ reg_write(REG_TRX_CTRL_1,
++ TX_AUTO_CRC_ON | SPI_CMD_MODE_PHY_RSSI << SPI_CMD_MODE_SHIFT);
++}
+diff --git a/atusb/mac.h b/atusb/mac.h
+new file mode 100644
+index 0000000..f3c92fb
+--- /dev/null
++++ b/atusb/mac.h
+@@ -0,0 +1,26 @@
++/*
++ * fw/mac.h - HardMAC functions
++ *
++ * Written 2011, 2013 by Werner Almesberger
++ * Copyright 2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef MAC_H
++#define MAC_H
++
++#include <stdbool.h>
++#include <stdint.h>
++
++
++extern bool (*mac_irq)(void);
++
++bool mac_rx(int on);
++bool mac_tx(uint16_t flags, uint8_t seq, uint16_t len);
++void mac_reset(void);
++
++#endif /* !MAC_H */
+diff --git a/atusb/sernum.c b/atusb/sernum.c
+new file mode 100644
+index 0000000..41e434c
+--- /dev/null
++++ b/atusb/sernum.c
+@@ -0,0 +1,47 @@
++/*
++ * fw/sernum.c - ATUSB serial number
++ *
++ * Written 2008-2011, 2013 by Werner Almesberger
++ * Copyright 2008-2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include "usb.h"
++
++#include "board.h"
++#include "sernum.h"
++
++
++static const uint8_t string_descriptor_0[] = {
++ 4, /* blength */
++ USB_DT_STRING, /* bDescriptorType */
++ LE(USB_LANGID_ENGLISH_US) /* wLANGID[0] */
++};
++
++
++bool sernum_get_descr(uint8_t type, uint8_t index, const uint8_t **reply,
++ uint8_t *size)
++{
++ if (type != USB_DT_STRING)
++ return 0;
++ switch (index) {
++ case 0:
++ *reply = string_descriptor_0;
++ *size = sizeof(string_descriptor_0);
++ return 1;
++ case 1:
++ *reply = board_sernum;
++ *size = sizeof(board_sernum);
++ return 1;
++ default:
++ return 0;
++ }
++}
+diff --git a/atusb/sernum.h b/atusb/sernum.h
+new file mode 100644
+index 0000000..31a8e27
+--- /dev/null
++++ b/atusb/sernum.h
+@@ -0,0 +1,37 @@
++/*
++ * fw/sernum.h - ATUSB serial number
++ *
++ * Written 2011, 2013 by Werner Almesberger
++ * Copyright 2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef SERNUM_H
++#define SERNUM_H
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include "board.h"
++
++
++#ifdef HAS_BOARD_SERNUM
++
++bool sernum_get_descr(uint8_t type, uint8_t index, const uint8_t **reply,
++ uint8_t *size);
++
++#else /* HAS_BOARD_SERNUM */
++
++static inline bool sernum_get_descr(uint8_t type, uint8_t index,
++ const uint8_t **reply, uint8_t *size)
++{
++ return 0;
++}
++
++#endif /* !HAS_BOARD_SERNUM */
++
++#endif /* !SERNUM_H */
+diff --git a/atusb/spi.c b/atusb/spi.c
+new file mode 100644
+index 0000000..3fa5715
+--- /dev/null
++++ b/atusb/spi.c
+@@ -0,0 +1,51 @@
++/*
++ * fw/spi.c - ATmega8 family SPI I/O
++ *
++ * Written 2011, 2013 by Werner Almesberger
++ * Copyright 2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include <avr/io.h>
++
++#include "board.h"
++#include "spi.h"
++
++
++uint8_t spi_io(uint8_t v)
++{
++// while (!(UCSR1A & 1 << UDRE1));
++ SPI_DATA = v;
++ SPI_WAIT_DONE();
++ return SPI_DATA;
++}
++
++
++void spi_end(void)
++{
++// while (!(UCSR1A & 1 << TXC1));
++ SET(nSS);
++}
++
++
++void spi_recv_block(uint8_t *buf, uint8_t n)
++{
++ if (!n)
++ return;
++ SPI_DATA = 0;
++ while (--n) {
++ SPI_WAIT_DONE();
++ *buf++ = SPI_DATA;
++ SPI_DATA = 0;
++ }
++ SPI_WAIT_DONE();
++ *buf++ = SPI_DATA;
++}
+diff --git a/atusb/spi.h b/atusb/spi.h
+new file mode 100644
+index 0000000..6e04f4e
+--- /dev/null
++++ b/atusb/spi.h
+@@ -0,0 +1,30 @@
++/*
++ * fw/spi.h - ATmega8 family SPI I/O
++ *
++ * Written 2011, 2013 by Werner Almesberger
++ * Copyright 2011, 2013 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef SPI_H
++#define SPI_H
++
++#include <stdint.h>
++
++
++void spi_begin(void);
++uint8_t spi_io(uint8_t v);
++void spi_end(void);
++void spi_off(void);
++void spi_init(void);
++
++#define spi_send(v) (void) spi_io(v)
++#define spi_recv(v) spi_io(0)
++
++void spi_recv_block(uint8_t *buf, uint8_t n);
++
++#endif /* !SPI_H */
+diff --git a/atusb/uart.c b/atusb/uart.c
+new file mode 100644
+index 0000000..44bec27
+--- /dev/null
++++ b/atusb/uart.c
+@@ -0,0 +1,64 @@
++/*
++ * fw/uart.h - Functions needed for debugging over uart
++ *
++ * Code adapted from http://www.roboternetz.de/wissen/index.php/UART_mit_avr-gcc
++ * and http://www.mikrocontroller.net/articles/AVR-GCC-Tutorial
++ *
++ * Published under the Creative Commons Share-Alike licence
++ * https://creativecommons.org/licenses/by-sa/2.0/de/
++ *
++ * S. Salewski 2007
++ *
++ * Adapted by
++ * Josef Filzmaier 2017
++ */
++
++#include <avr/io.h>
++#include "uart.h"
++
++#define USART_BAUD 38400UL
++#define F_CPU 8000000UL
++
++#define Wait_USART_Ready() while (!(UCSR1A & (1<<UDRE1)))
++#define UART_UBRR (F_CPU/(16L*USART_BAUD)-1)
++
++// initialize USART, 8N1 mode
++void
++uart_init(void)
++{
++/* TODO: Find a working configuration for uart for the atmega32u2 */
++#if CHIP == at90usb1287
++ CLKPR = (1 << CLKPCE);
++ CLKPR = 0; // clock prescaler == 0, so we have 16 MHz mpu frequency
++ UBRR1 = UART_UBRR;
++ UCSR1C = (1 << UCSZ10) | (1 << UCSZ11);
++ UCSR1B = (1 << TXEN1);
++ do
++ {
++ UDR1;
++ }
++ while (UCSR1A & (1 << RXC1));
++#endif
++
++}
++
++int uart_write_char(char c, FILE* stream)
++{
++ if (c == '\n'){
++ uart_new_line();
++ }
++ else {
++ Wait_USART_Ready();
++ UDR1 = c;
++ }
++ return 0;
++}
++
++void
++uart_new_line(void)
++{
++ Wait_USART_Ready();
++ UDR1 = '\r';
++ Wait_USART_Ready();
++ UDR1 = '\n';
++}
+diff --git a/atusb/uart.h b/atusb/uart.h
+new file mode 100644
+index 0000000..4810f9c
+--- /dev/null
++++ b/atusb/uart.h
+@@ -0,0 +1,25 @@
++/*
++ * fw/uart.h - Functions needed for debugging over uart
++ *
++ * Code adapted from http://www.roboternetz.de/wissen/index.php/UART_mit_avr-gcc
++ * and http://www.mikrocontroller.net/articles/AVR-GCC-Tutorial
++ *
++ * Published under the Creative Commons Share-Alike licence
++ * https://creativecommons.org/licenses/by-sa/2.0/de/
++ *
++ * S. Salewski 2007
++ *
++ * Adapted by
++ * Josef Filzmaier 2017
++ */
++
++#ifndef UART_H_
++#define UART_H_
++
++#include <stdio.h>
++
++void uart_init(void);
++int uart_write_char(char c, FILE* stream);
++void uart_new_line(void);
++
++#endif /* UART_H_ */
+diff --git a/atusb/usb/atu2.c b/atusb/usb/atu2.c
+new file mode 100644
+index 0000000..98158bf
+--- /dev/null
++++ b/atusb/usb/atu2.c
+@@ -0,0 +1,247 @@
++/*
++ * fw/usb/atu2.c - Chip-specific driver for Atmel ATxxxU2 USB chips
++ *
++ * Written 2008-2011, 2013-2014 by Werner Almesberger
++ * Copyright 2008-2011, 2013-2014 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++/*
++ * Known issues:
++ * - no suspend/resume
++ * - we don't call back after failed transmissions,
++ * - we don't reset the EP buffer after failed receptions
++ * - enumeration often encounters an error -71 (from which it recovers)
++ */
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#define F_CPU 8000000UL
++#include <util/delay.h>
++
++#include <avr/io.h>
++#include <avr/interrupt.h>
++#include "usb.h"
++#include "board.h"
++
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#if 1
++#define BUG_ON(cond) do { if (cond) panic(); } while (0)
++#else
++#define BUG_ON(cond)
++#endif
++
++
++struct ep_descr eps[NUM_EPS];
++
++
++static uint16_t usb_read_word(void)
++{
++ uint8_t low;
++
++ low = UEDATX;
++ return low | UEDATX << 8;
++}
++
++
++static void enable_addr(void *user)
++{
++ while (!(UEINTX & (1 << TXINI)));
++ UDADDR |= 1 << ADDEN;
++}
++
++
++void set_addr(uint8_t addr)
++{
++ UDADDR = addr;
++ usb_send(&eps[0], NULL, 0, enable_addr, NULL);
++}
++
++
++void usb_ep_change(struct ep_descr *ep)
++{
++ if (ep->state == EP_TX) {
++ UENUM = ep-eps;
++ UEIENX |= 1 << TXINE;
++ }
++}
++
++
++static bool ep_setup(void)
++{
++ struct setup_request setup;
++
++ BUG_ON(UEBCLX < 8);
++
++ setup.bmRequestType = UEDATX;
++ setup.bRequest = UEDATX;
++ setup.wValue = usb_read_word();
++ setup.wIndex = usb_read_word();
++ setup.wLength = usb_read_word();
++
++ if (!handle_setup(&setup))
++ return 0;
++ if (!(setup.bmRequestType & 0x80) && eps[0].state == EP_IDLE)
++ usb_send(&eps[0], NULL, 0, NULL, NULL);
++ return 1;
++}
++
++
++static bool ep_rx(struct ep_descr *ep)
++{
++ uint8_t size;
++
++ size = UEBCLX;
++ if (size > ep->end-ep->buf)
++ return 0;
++ while (size--)
++ *ep->buf++ = UEDATX;
++ if (ep->buf == ep->end) {
++ ep->state = EP_IDLE;
++ if (ep->callback)
++ ep->callback(ep->user);
++// if (ep == &eps[0])
++ usb_send(ep, NULL, 0, NULL, NULL);
++ }
++ return 1;
++}
++
++
++static void ep_tx(struct ep_descr *ep)
++{
++ uint8_t size = ep->end-ep->buf;
++ uint8_t left;
++
++ if (size > ep->size)
++ size = ep->size;
++ for (left = size; left; left--)
++ UEDATX = *ep->buf++;
++ if (size == ep->size)
++ return;
++ ep->state = EP_IDLE;
++}
++
++
++static void handle_ep(int n)
++{
++ struct ep_descr *ep = eps+n;
++ uint8_t mask;
++
++ UENUM = n;
++ if (UEINTX & (1 << RXSTPI)) {
++ /* @@@ EP_RX. EP_TX: cancel */
++ ep->state = EP_IDLE;
++ if (!ep_setup())
++ goto stall;
++ UEINTX = ~(1 << RXSTPI);
++ }
++ if (UEINTX & (1 << RXOUTI)) {
++ /* @@ EP_TX: cancel */
++ if (ep->state != EP_RX)
++ goto stall;
++ if (!ep_rx(ep))
++ goto stall;
++ /* @@@ gcc 4.5.2 wants this cast */
++ UEINTX = (uint8_t) ~(1 << RXOUTI | 1 << FIFOCON);
++ }
++ if (UEINTX & (1 << STALLEDI)) {
++ ep->state = EP_IDLE;
++ UEINTX = ~(1 << STALLEDI);
++ }
++ if (UEINTX & (1 << TXINI)) {
++ /* @@ EP_RX: cancel (?) */
++ if (ep->state == EP_TX) {
++ ep_tx(ep);
++ mask = 1 << TXINI;
++ if (n)
++ mask |= 1 << FIFOCON;
++ UEINTX = ~mask;
++ if (ep->state == EP_IDLE && ep->callback)
++ ep->callback(ep->user);
++ } else {
++ UEIENX &= ~(1 << TXINE);
++ }
++ }
++ return;
++
++stall:
++ UEINTX = ~(1 << RXSTPI | 1 << RXOUTI | 1 << STALLEDI);
++ ep->state = EP_IDLE;
++ UECONX |= 1 << STALLRQ;
++}
++
++
++void ep_init(void)
++{
++ UENUM = 0;
++ UECONX = (1 << RSTDT) | (1 << EPEN); /* enable */
++ UECFG0X = 0; /* control, direction is ignored */
++ UECFG1X = 3 << EPSIZE0; /* 64 bytes */
++ UECFG1X |= 1 << ALLOC;
++
++ while (!(UESTA0X & (1 << CFGOK)));
++
++ UEIENX =
++ (1 << RXSTPE) | (1 << RXOUTE) | (1 << STALLEDE) | (1 << TXINE);
++
++ eps[0].state = EP_IDLE;
++ eps[0].size = 64;
++
++#ifndef BOOT_LOADER
++
++ UENUM = 1;
++ UECONX = (1 << RSTDT) | (1 << EPEN); /* enable */
++ UECFG0X = (1 << EPTYPE1) | (1 << EPDIR); /* bulk IN */
++ UECFG1X = 3 << EPSIZE0; /* 64 bytes */
++ UECFG1X |= 1 << ALLOC;
++
++ while (!(UESTA0X & (1 << CFGOK)));
++
++ UEIENX = (1 << STALLEDE) | (1 << TXINE);
++
++ eps[1].state = EP_IDLE;
++ eps[1].size = 64;
++
++#endif
++}
++
++
++ISR(USB_GEN_vect)
++{
++ uint8_t flags;
++
++ flags = UDINT;
++ if (flags & (1 << EORSTI)) {
++ if (user_reset)
++ user_reset();
++ ep_init();
++ UDINT = ~(1 << EORSTI);
++ }
++}
++
++
++ISR(USB_COM_vect)
++{
++ uint8_t flags, i;
++
++ flags = UEINT;
++ for (i = 0; i != NUM_EPS; i++)
++ if (flags & (1 << i))
++ handle_ep(i);
++}
++
++
++void usb_reset(void)
++{
++ UDCON |= 1 << DETACH; /* detach the pull-up */
++ _delay_ms(1);
++}
+diff --git a/atusb/usb/dfu.c b/atusb/usb/dfu.c
+new file mode 100644
+index 0000000..c84a28d
+--- /dev/null
++++ b/atusb/usb/dfu.c
+@@ -0,0 +1,260 @@
++/*
++ * boot/dfu.c - DFU protocol engine
++ *
++ * Written 2008-2011, 2013-2015 by Werner Almesberger
++ * Copyright 2008-2011, 2013-2015 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++/*
++ * http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf
++ */
++
++/*
++ * A few, erm, shortcuts:
++ *
++ * - we don't bother with the app* states since DFU is all this firmware does
++ * - after DFU_DNLOAD, we just block until things are written, so we never
++ * enter dfuDNLOAD_SYNC or dfuDNBUSY
++ * - no dfuMANIFEST_SYNC, dfuMANIFEST, or dfuMANIFEST_WAIT_RESET
++ * - to keep our buffers small, we only accept EP0-sized blocks
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include "usb.h"
++#include "dfu.h"
++
++#include "board.h"
++
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#define debug(...)
++#define error(...)
++
++
++#ifndef DFU_ALT_SETTINGS
++#define DFU_ALT_SETTINGS 1
++#endif
++
++#ifndef DFU_ALT_NAME_0_IDX
++#define DFU_ALT_NAME_0_IDX 0
++#endif
++
++#ifndef DFU_ALT_NAME_1_IDX
++#define DFU_ALT_NAME_1_IDX 0
++#endif
++
++#ifndef DFU_ALT_NAME_2_IDX
++#define DFU_ALT_NAME_2_IDX 0
++#endif
++
++
++const uint8_t device_descriptor[] = {
++ 18, /* bLength */
++ USB_DT_DEVICE, /* bDescriptorType */
++ LE(0x100), /* bcdUSB */
++ USB_CLASS_APP_SPEC, /* bDeviceClass */
++ 0x00, /* bDeviceSubClass (per interface) */
++ 0x00, /* bDeviceProtocol (per interface) */
++ EP0_SIZE, /* bMaxPacketSize */
++ LE(DFU_USB_VENDOR), /* idVendor */
++ LE(DFU_USB_PRODUCT), /* idProduct */
++ LE(0x0001), /* bcdDevice */
++ 0, /* iManufacturer */
++ 0, /* iProduct */
++#ifdef HAS_BOARD_SERNUM
++ 1, /* iSerialNumber */
++#else
++ 0, /* iSerialNumber */
++#endif
++ 1 /* bNumConfigurations */
++};
++
++
++const uint8_t config_descriptor[] = {
++ 9, /* bLength */
++ USB_DT_CONFIG, /* bDescriptorType */
++ LE(9+9*DFU_ALT_SETTINGS), /* wTotalLength */
++ 1, /* bNumInterfaces */
++ 1, /* bConfigurationValue (> 0 !) */
++ 0, /* iConfiguration */
++// USB_ATTR_SELF_POWERED | USB_ATTR_BUS_POWERED,
++ USB_ATTR_BUS_POWERED, /* bmAttributes */
++ ((BOARD_MAX_mA)+1)/2, /* bMaxPower */
++
++ /* Interface #0 */
++
++ DFU_ITF_DESCR(0, 0, dfu_proto_dfu, DFU_ALT_NAME_0_IDX)
++#if DFU_ALT_SETTINGS > 1
++ DFU_ITF_DESCR(0, 1, dfu_proto_dfu, DFU_ALT_NAME_1_IDX)
++#endif
++#if DFU_ALT_SETTINGS > 2
++ DFU_ITF_DESCR(0, 2, dfu_proto_dfu, DFU_ALT_NAME_2_IDX)
++#endif
++};
++
++
++static uint16_t next_block = 0;
++static bool did_download;
++
++
++static uint8_t buf[EP0_SIZE];
++
++
++static void block_write(void *user)
++{
++ uint16_t *size = user;
++
++ dfu_flash_ops->write(buf, *size);
++}
++
++
++static bool block_receive(uint16_t length)
++{
++ static uint16_t size;
++
++ if (!dfu_flash_ops->can_write(length)) {
++ dfu.state = dfuERROR;
++ dfu.status = errADDRESS;
++ return 0;
++ }
++ if (length > EP0_SIZE) {
++ dfu.state = dfuERROR;
++ dfu.status = errUNKNOWN;
++ return 0;
++ }
++ size = length;
++ usb_recv(&eps[0], buf, size, block_write, &size);
++ return 1;
++}
++
++
++static bool block_transmit(uint16_t length)
++{
++ uint16_t got;
++
++ if (length > EP0_SIZE) {
++ dfu.state = dfuERROR;
++ dfu.status = errUNKNOWN;
++ return 1;
++ }
++ got = dfu_flash_ops->read(buf, length);
++ if (got < length) {
++ length = got;
++ dfu.state = dfuIDLE;
++ }
++ usb_send(&eps[0], buf, length, NULL, NULL);
++ return 1;
++}
++
++
++static bool my_setup(const struct setup_request *setup)
++{
++ bool ok;
++
++ switch (setup->bmRequestType | setup->bRequest << 8) {
++ case DFU_TO_DEV(DFU_DETACH):
++ debug("DFU_DETACH\n");
++ /*
++ * The DFU spec says thay this is sent in protocol 1 only.
++ * However, dfu-util also sends it to get out of DFU mode,
++ * so we just don't make a fuss and ignore it.
++ */
++ return 1;
++ case DFU_TO_DEV(DFU_DNLOAD):
++ debug("DFU_DNLOAD\n");
++ if (dfu.state == dfuIDLE) {
++ next_block = setup->wValue;
++ dfu_flash_ops->start();
++ }
++ else if (dfu.state != dfuDNLOAD_IDLE) {
++ error("bad state\n");
++ return 0;
++ }
++ if (dfu.state != dfuIDLE && setup->wValue == next_block-1) {
++ debug("retransmisson\n");
++ return 1;
++ }
++ if (setup->wValue != next_block) {
++ debug("bad block (%d vs. %d)\n",
++ setup->wValue, next_block);
++ dfu.state = dfuERROR;
++ dfu.status = errUNKNOWN;
++ return 1;
++ }
++ if (!setup->wLength) {
++ debug("DONE\n");
++ dfu_flash_ops->end_write();
++ dfu.state = dfuIDLE;
++ did_download = 1;
++ return 1;
++ }
++ ok = block_receive(setup->wLength);
++ next_block++;
++ dfu.state = dfuDNLOAD_IDLE;
++ return ok;
++ case DFU_FROM_DEV(DFU_UPLOAD):
++ debug("DFU_UPLOAD\n");
++ if (dfu.state == dfuIDLE) {
++ next_block = setup->wValue;
++ dfu_flash_ops->start();
++ }
++ else if (dfu.state != dfuUPLOAD_IDLE)
++ return 0;
++ if (dfu.state != dfuIDLE && setup->wValue == next_block-1) {
++ debug("retransmisson\n");
++ /* @@@ try harder */
++ dfu.state = dfuERROR;
++ dfu.status = errUNKNOWN;
++ return 1;
++ }
++ if (setup->wValue != next_block) {
++ debug("bad block (%d vs. %d)\n",
++ setup->wValue, next_block);
++ dfu.state = dfuERROR;
++ dfu.status = errUNKNOWN;
++ return 1;
++ }
++ ok = block_transmit(setup->wLength);
++ next_block++;
++ dfu.state = dfuUPLOAD_IDLE;
++ return ok;
++ case DFU_TO_DEV(DFU_ABORT):
++ debug("DFU_ABORT\n");
++ dfu.state = dfuIDLE;
++ dfu.status = OK;
++ return 1;
++ default:
++ return dfu_setup_common(setup);
++ }
++}
++
++
++static void my_reset(void)
++{
++#if 0
++ /* @@@ not nice -- think about where this should go */
++ extern void run_payload(void);
++
++ if (did_download)
++ run_payload();
++#endif
++}
++
++
++void dfu_init(void)
++{
++ user_setup = my_setup;
++ user_get_descriptor = dfu_my_descr;
++ user_reset = my_reset;
++}
+diff --git a/atusb/usb/dfu.h b/atusb/usb/dfu.h
+new file mode 100644
+index 0000000..bc35bbc
+--- /dev/null
++++ b/atusb/usb/dfu.h
+@@ -0,0 +1,119 @@
++/*
++ * boot/dfu.h - DFU protocol constants and data structures
++ *
++ * Written 2008, 2011, 2013-2015 by Werner Almesberger
++ * Copyright 2008, 2011, 2013-2015 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#ifndef DFU_H
++#define DFU_H
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include "usb.h"
++
++
++enum dfu_request {
++ DFU_DETACH,
++ DFU_DNLOAD,
++ DFU_UPLOAD,
++ DFU_GETSTATUS,
++ DFU_CLRSTATUS,
++ DFU_GETSTATE,
++ DFU_ABORT,
++};
++
++
++enum dfu_status {
++ OK,
++ errTARGET,
++ errFILE,
++ errWRITE,
++ errERASE,
++ errCHECK_ERASED,
++ errPROG,
++ errVERIFY,
++ errADDRESS,
++ errNOTDONE,
++ errFIRMWARE,
++ errVENDOR,
++ errUSBR,
++ errPOR,
++ errUNKNOWN,
++ errSTALLEDPKT,
++};
++
++
++enum dfu_state {
++ appIDLE,
++ appDETACH,
++ dfuIDLE,
++ dfuDNLOAD_SYNC,
++ dfuDNBUSY,
++ dfuDNLOAD_IDLE,
++ dfuMANIFEST_SYNC,
++ dfuMANIFEST,
++ dfuMANIFEST_WAIT_RESET,
++ dfuUPLOAD_IDLE,
++ dfuERROR
++};
++
++enum dfu_itf_proto {
++ dfu_proto_runtime = 1, /* Runtime protocol */
++ dfu_proto_dfu = 2, /* DFU mode protocol */
++};
++
++
++#define DFU_DT_FUNCTIONAL 0x21 /* DFU FUNCTIONAL descriptor type */
++
++
++#define DFU_TO_DEV(req) (0x21 | (req) << 8)
++#define DFU_FROM_DEV(req) (0xa1 | (req) << 8)
++
++
++struct dfu {
++ uint8_t status; /* bStatus */
++ uint8_t toL, toM, toH; /* bwPollTimeout */
++ uint8_t state; /* bState */
++ uint8_t iString;
++};
++
++
++#define DFU_ITF_DESCR(itf, alt, proto, idx) \
++ 9, /* bLength */ \
++ USB_DT_INTERFACE, /* bDescriptorType */ \
++ (itf), /* bInterfaceNumber */ \
++ (alt), /* bAlternateSetting */ \
++ 0, /* bNumEndpoints */ \
++ 0xfe, /* bInterfaceClass (application specific) */ \
++ 0x01, /* bInterfaceSubClass (device fw upgrade) */ \
++ (proto), /* bInterfaceProtocol (dfu_proto_*) */ \
++ (idx), /* iInterface */
++
++
++struct dfu_flash_ops {
++ void (*start)(void);
++ bool (*can_write)(uint16_t size);
++ void (*write)(const uint8_t *buf, uint16_t size);
++ void (*end_write)(void);
++ uint16_t (*read)(uint8_t *buf, uint16_t size);
++};
++
++extern struct dfu dfu;
++extern const struct dfu_flash_ops *dfu_flash_ops;
++
++
++bool dfu_setup_common(const struct setup_request *setup);
++bool dfu_my_descr(uint8_t type, uint8_t index, const uint8_t **reply,
++ uint8_t *size);
++
++void dfu_init(void);
++
++#endif /* !DFU_H */
+diff --git a/atusb/usb/dfu_common.c b/atusb/usb/dfu_common.c
+new file mode 100644
+index 0000000..9b6feef
+--- /dev/null
++++ b/atusb/usb/dfu_common.c
+@@ -0,0 +1,101 @@
++/*
++ * boot/dfu_common.c - DFU protocol engine parts common to App/DFU
++ *
++ * Written 2008-2011, 2013-2014 by Werner Almesberger
++ * Copyright 2008-2011, 2013-2014 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++/*
++ * http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf
++ */
++
++/*
++ * A few, erm, shortcuts:
++ *
++ * - we don't bother with the app* states since DFU is all this firmware does
++ * - after DFU_DNLOAD, we just block until things are written, so we never
++ * enter dfuDNLOAD_SYNC or dfuDNBUSY
++ * - no dfuMANIFEST_SYNC, dfuMANIFEST, or dfuMANIFEST_WAIT_RESET
++ * - to keep our buffers small, we only accept EP0-sized blocks
++ */
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include "usb.h"
++#include "dfu.h"
++
++#include "board.h"
++#include "../sernum.h"
++
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#define debug(...)
++#define error(...)
++
++
++static const uint8_t functional_descriptor[] = {
++ 9, /* bLength */
++ DFU_DT_FUNCTIONAL, /* bDescriptorType */
++ 0xf, /* bmAttributes (claim omnipotence :-) */
++ LE(0xffff), /* wDetachTimeOut (we're very patient) */
++ LE(EP0_SIZE), /* wTransferSize */
++ LE(0x101), /* bcdDFUVersion */
++};
++
++
++/*
++ * The worst-case activity would be flashing a one page and erasing another
++ * one, would should take less than 10 ms. A 100 ms timeout ought to be plenty.
++ */
++
++struct dfu dfu = {
++ OK, /* bStatus */
++ LE(100), 0, /* bwPollTimeout, 100 ms */
++ dfuIDLE, /* bState */
++ 0, /* iString */
++};
++
++
++bool dfu_setup_common(const struct setup_request *setup)
++{
++ switch (setup->bmRequestType | setup->bRequest << 8) {
++ case DFU_FROM_DEV(DFU_GETSTATUS):
++ debug("DFU_GETSTATUS\n");
++ usb_send(&eps[0], (uint8_t *) &dfu, sizeof(dfu), NULL, NULL);
++ return 1;
++ case DFU_TO_DEV(DFU_CLRSTATUS):
++ debug("DFU_CLRSTATUS\n");
++ dfu.state = dfuIDLE;
++ dfu.status = OK;
++ return 1;
++ case DFU_FROM_DEV(DFU_GETSTATE):
++ debug("DFU_GETSTATE\n");
++ usb_send(&eps[0], &dfu.state, 1, NULL, NULL);
++ return 1;
++ default:
++ error("DFU rt %x, rq%x ?\n",
++ setup->bmRequestType, setup->bRequest);
++ return 0;
++ }
++}
++
++
++bool dfu_my_descr(uint8_t type, uint8_t index, const uint8_t **reply,
++ uint8_t *size)
++{
++ if (type != DFU_DT_FUNCTIONAL)
++ return sernum_get_descr(type, index, reply, size);
++ *reply = functional_descriptor;
++ *size = sizeof(functional_descriptor);
++ return 1;
++}
+diff --git a/atusb/usb/usb.c b/atusb/usb/usb.c
+new file mode 100644
+index 0000000..543d8c2
+--- /dev/null
++++ b/atusb/usb/usb.c
+@@ -0,0 +1,181 @@
++/*
++ * fw/usb/usb.c - USB hardware setup and standard device requests
++ *
++ * Written 2008-2011, 2013, 2015 by Werner Almesberger
++ * Copyright 2008-2011, 2013, 2015 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++/*
++ * Known issues:
++ * - no suspend/resume
++ * - should support EP clearing and stalling
++ */
++
++#include <stdbool.h>
++#include <stdint.h>
++
++#include "usb.h"
++#include "board.h"
++
++
++#ifndef NULL
++#define NULL 0
++#endif
++
++#if 1
++extern void panic(void);
++#define BUG_ON(cond) do { if (cond) panic(); } while (0)
++#else
++#define BUG_ON(cond)
++#endif
++
++bool (*user_setup)(const struct setup_request *setup);
++void (*user_set_interface)(int nth);
++bool (*user_get_descriptor)(uint8_t type, uint8_t index,
++ const uint8_t **reply, uint8_t *size);
++void (*user_reset)(void);
++
++
++void usb_io(struct ep_descr *ep, enum ep_state state, uint8_t *buf,
++ uint8_t size, void (*callback)(void *user), void *user)
++{
++ BUG_ON(ep->state);
++ ep->state = state;
++ ep->buf = buf;
++ ep->end = buf+size;
++ ep->callback = callback;
++ ep->user = user;
++ usb_ep_change(ep);
++}
++
++
++static bool get_descriptor(uint8_t type, uint8_t index, uint16_t length)
++{
++ const uint8_t *reply;
++ uint8_t size;
++
++ switch (type) {
++ case USB_DT_DEVICE:
++ reply = device_descriptor;
++ size = reply[0];
++ break;
++ case USB_DT_CONFIG:
++ if (index)
++ return 0;
++ reply = config_descriptor;
++ size = reply[2];
++ break;
++ default:
++ if (!user_get_descriptor)
++ return 0;
++ if (!user_get_descriptor(type, index, &reply, &size))
++ return 0;
++ }
++ if (length < size)
++ size = length;
++ usb_send(&eps[0], reply, size, NULL, NULL);
++ return 1;
++}
++
++
++bool handle_setup(const struct setup_request *setup)
++{
++ switch (setup->bmRequestType | setup->bRequest << 8) {
++
++ /*
++ * Device request
++ *
++ * See http://www.beyondlogic.org/usbnutshell/usb6.htm
++ */
++
++ case FROM_DEVICE(GET_STATUS):
++ if (setup->wLength != 2)
++ return 0;
++ usb_send(&eps[0], "\000", 2, NULL, NULL);
++ break;
++ case TO_DEVICE(CLEAR_FEATURE):
++ break;
++ case TO_DEVICE(SET_FEATURE):
++ return 0;
++ case TO_DEVICE(SET_ADDRESS):
++ set_addr(setup->wValue);
++ break;
++ case FROM_DEVICE(GET_DESCRIPTOR):
++ case FROM_INTERFACE(GET_DESCRIPTOR):
++ if (!get_descriptor(setup->wValue >> 8, setup->wValue,
++ setup->wLength))
++ return 0;
++ break;
++ case TO_DEVICE(SET_DESCRIPTOR):
++ return 0;
++ case FROM_DEVICE(GET_CONFIGURATION):
++ usb_send(&eps[0], "", 1, NULL, NULL);
++ break;
++ case TO_DEVICE(SET_CONFIGURATION):
++ if (setup->wValue != config_descriptor[5])
++ return 0;
++ break;
++
++ /*
++ * Interface request
++ */
++
++ case FROM_INTERFACE(GET_STATUS):
++ return 0;
++ case TO_INTERFACE(CLEAR_FEATURE):
++ return 0;
++ case TO_INTERFACE(SET_FEATURE):
++ return 0;
++ case FROM_INTERFACE(GET_INTERFACE):
++ return 0;
++ case TO_INTERFACE(SET_INTERFACE):
++ {
++ const uint8_t *interface_descriptor =
++ config_descriptor+9;
++ const uint8_t *p;
++ int i;
++
++ i = 0;
++ for (p = interface_descriptor;
++ p != config_descriptor+config_descriptor[2];
++ p += p[0]) {
++ if (p[1] != USB_DT_INTERFACE)
++ continue;
++ if (p[2] == setup->wIndex &&
++ p[3] == setup->wValue) {
++ if (user_set_interface)
++ user_set_interface(i);
++ return 1;
++ }
++ i++;
++ }
++ return 0;
++ }
++ break;
++
++ /*
++ * Endpoint request
++ */
++
++ case FROM_ENDPOINT(GET_STATUS):
++ return 0;
++ case TO_ENDPOINT(CLEAR_FEATURE):
++ return 0;
++ case TO_ENDPOINT(SET_FEATURE):
++ return 0;
++ case FROM_ENDPOINT(SYNCH_FRAME):
++ return 0;
++
++ default:
++ if (user_setup)
++ return user_setup(setup);
++ return 0;
++ }
++
++ return 1;
++}
+diff --git a/atusb/usb/usb.h b/atusb/usb/usb.h
+new file mode 100644
+index 0000000..cb40f9e
+--- /dev/null
++++ b/atusb/usb/usb.h
+@@ -0,0 +1,189 @@
++/*
++ * fw/usb//usb.h - USB hardware setup and standard device requests
++ *
++ * Written 2008, 2009, 2011, 2013, 2015 by Werner Almesberger
++ * Copyright 2008, 2009, 2011, 2013, 2015 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#ifndef USB_H
++#define USB_H
++
++
++#include <stdbool.h>
++#include <stdint.h>
++
++
++/*
++ * Packet identifier types
++ */
++
++#define PID_OUT 0x1
++#define PID_IN 0x9
++#define PID_SOF 0x5
++#define PID_SETUP 0xd
++#define PID_DATA0 0x3
++#define PID_DATA1 0xb
++#define PID_ACK 0x2
++#define PID_NAK 0xa
++#define PID_STALL 0xe
++
++/*
++ * Descriptor types
++ *
++ * Reuse libusb naming scheme (/usr/include/usb.h)
++ */
++
++#define USB_DT_DEVICE 1
++#define USB_DT_CONFIG 2
++#define USB_DT_STRING 3
++#define USB_DT_INTERFACE 4
++#define USB_DT_ENDPOINT 5
++
++/*
++ * Device classes
++ *
++ * Reuse libusb naming scheme (/usr/include/usb.h)
++ */
++
++#define USB_CLASS_PER_INTERFACE 0
++#define USB_CLASS_COMM 2
++#define USB_CLASS_HID 3
++#define USB_CLASS_MASS_STORAGE 8
++#define USB_CLASS_HUB 9
++#define USB_CLASS_DATA 10
++#define USB_CLASS_APP_SPEC 0xfe
++#define USB_CLASS_VENDOR_SPEC 0xff
++
++/*
++ * Configuration attributes
++ */
++
++#define USB_ATTR_BUS_POWERED 0x80
++#define USB_ATTR_SELF_POWERED 0x40
++#define USB_ATTR_REMOTE_WAKEUP 0x20
++
++/*
++ * Endpoint type
++ */
++
++#define USB_ENDPOINT_TYPE_CONTROL 0
++#define USB_ENDPOINT_TYPE_ISOCHRONOUS 1
++#define USB_ENDPOINT_TYPE_BULK 2
++#define USB_ENDPOINT_TYPE_INTERRUPT 3
++
++/*
++ * Setup request types
++ */
++
++#define TO_DEVICE(req) (0x00 | (req) << 8)
++#define FROM_DEVICE(req) (0x80 | (req) << 8)
++#define TO_INTERFACE(req) (0x01 | (req) << 8)
++#define FROM_INTERFACE(req) (0x81 | (req) << 8)
++#define TO_ENDPOINT(req) (0x02 | (req) << 8)
++#define FROM_ENDPOINT(req) (0x82 | (req) << 8)
++
++/*
++ * Setup requests
++ */
++
++#define GET_STATUS 0x00
++#define CLEAR_FEATURE 0x01
++#define SET_FEATURE 0x03
++#define SET_ADDRESS 0x05
++#define GET_DESCRIPTOR 0x06
++#define SET_DESCRIPTOR 0x07
++#define GET_CONFIGURATION 0x08
++#define SET_CONFIGURATION 0x09
++#define GET_INTERFACE 0x0a
++#define SET_INTERFACE 0x0b
++#define SYNCH_FRAME 0x0c
++
++/*
++ * USB Language ID codes
++ *
++ * http://www.usb.org/developers/docs/USB_LANGIDs.pdf
++ */
++
++#define USB_LANGID_ENGLISH_US 0x409
++
++
++/*
++ * Odd. sdcc seems to think "x" assumes the size of the destination, i.e.,
++ * uint8_t. Hence the cast.
++ */
++
++#define LE(x) ((uint16_t) (x) & 0xff), ((uint16_t) (x) >> 8)
++
++#define LO(x) (((uint8_t *) &(x))[0])
++#define HI(x) (((uint8_t *) &(x))[1])
++
++
++#ifdef LOW_SPEED
++#define EP0_SIZE 8
++#else
++#define EP0_SIZE 64
++#endif
++
++#define EP1_SIZE 64 /* simplify */
++
++
++enum ep_state {
++ EP_IDLE,
++ EP_RX,
++ EP_TX,
++ EP_STALL,
++};
++
++struct ep_descr {
++ enum ep_state state;
++ uint8_t *buf;
++ uint8_t *end;
++ uint8_t size;
++ void (*callback)(void *user);
++ void *user;
++};
++
++struct setup_request {
++ uint8_t bmRequestType;
++ uint8_t bRequest;
++ uint16_t wValue;
++ uint16_t wIndex;
++ uint16_t wLength;
++};
++
++
++extern const uint8_t device_descriptor[];
++extern const uint8_t config_descriptor[];
++extern struct ep_descr eps[];
++
++extern bool (*user_setup)(const struct setup_request *setup);
++extern void (*user_set_interface)(int nth);
++extern bool (*user_get_descriptor)(uint8_t type, uint8_t index,
++ const uint8_t **reply, uint8_t *size);
++extern void (*user_reset)(void);
++
++
++#define usb_left(ep) ((ep)->end-(ep)->buf)
++#define usb_send(ep, buf, size, callback, user) \
++ usb_io(ep, EP_TX, (void *) buf, size, callback, user)
++#define usb_recv(ep, buf, size, callback, user) \
++ usb_io(ep, EP_RX, buf, size, callback, user)
++
++void usb_io(struct ep_descr *ep, enum ep_state state, uint8_t *buf,
++ uint8_t size, void (*callback)(void *user), void *user);
++
++bool handle_setup(const struct setup_request *setup);
++void set_addr(uint8_t addr);
++void usb_ep_change(struct ep_descr *ep);
++void usb_reset(void);
++void usb_init(void);
++
++void ep_init(void);
++
++#endif /* !USB_H */
+diff --git a/atusb/version.h b/atusb/version.h
+new file mode 100644
+index 0000000..8fd6a2c
+--- /dev/null
++++ b/atusb/version.h
+@@ -0,0 +1,23 @@
++/*
++ * fw/version.h - Automatically generated version string
++ *
++ * Written 2008, 2011 by Werner Almesberger
++ * Copyright 2008, 2011 Werner Almesberger
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++
++#ifndef VERSION_H
++#define VERSION_H
++
++#include <stdint.h>
++
++
++extern const char *build_date;
++extern const uint16_t build_number;
++
++#endif /* !VERSION_H */
+--
+2.26.0
+