diff options
Diffstat (limited to 'libre-testing/uboot4extlinux-udoo')
5 files changed, 0 insertions, 351 deletions
diff --git a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch deleted file mode 100644 index 1538e9636..000000000 --- a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,164 +0,0 @@ -diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig -index a4a17c161..88a863337 100644 ---- a/configs/udoo_defconfig -+++ b/configs/udoo_defconfig -@@ -30,3 +30,4 @@ CONFIG_CMD_FS_GENERIC=y - CONFIG_DM=y - CONFIG_DM_THERMAL=y - CONFIG_OF_LIBFDT=y -+CONFIG_IDENT_STRING=" Parabola GNU/Linux-libre" -diff --git a/include/configs/udoo.h b/include/configs/udoo.h -index 0a7767c20..543993731 100644 ---- a/include/configs/udoo.h -+++ b/include/configs/udoo.h -@@ -51,6 +51,9 @@ - - /* Command definition */ - #define CONFIG_CMD_BMODE -+#define CONFIG_PARTITION_UUIDS -+#define CONFIG_CMD_PART -+#define CONFIG_SUPPORT_RAW_INITRD - - #define CONFIG_SYS_MEMTEST_START 0x10000000 - #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) -@@ -60,8 +63,13 @@ - - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include <config_distro_bootcmd.h> -+ - #define CONFIG_EXTRA_ENV_SETTINGS \ -- "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc1\0" \ - "splashpos=m,m\0" \ -@@ -69,47 +77,54 @@ - "initrd_high=0xffffffff\0" \ - "fdt_file=undefined\0" \ - "fdt_addr=0x18000000\0" \ -- "boot_fdt=try\0" \ -+ "rdaddr=0x12A00000\0" \ -+ "rdfile=initramfs-linux.img\0" \ -+ "optargs=\0" \ -+ "video=\0" \ - "ip_dyn=yes\0" \ -+ "devtype=mmc\0" \ -+ "devnum=0\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ -- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ -- "update_sd_firmware_filename=u-boot.imx\0" \ -- "update_sd_firmware=" \ -- "if test ${ip_dyn} = yes; then " \ -- "setenv get_cmd dhcp; " \ -- "else " \ -- "setenv get_cmd tftp; " \ -- "fi; " \ -- "if mmc dev ${mmcdev}; then " \ -- "if ${get_cmd} ${update_sd_firmware_filename}; then " \ -- "setexpr fw_sz ${filesize} / 0x200; " \ -- "setexpr fw_sz ${fw_sz} + 1; " \ -- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ -- "fi; " \ -- "fi\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ -- "root=${mmcroot}\0" \ -- "loadbootscript=" \ -- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ -- "bootscript=echo Running bootscript from mmc ...; " \ -- "source\0" \ -- "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ -- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ -- "mmcboot=echo Booting from mmc ...; " \ -- "run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -- "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -+ "${optargs} " \ -+ "root=${root} " \ -+ "video=${video}\0" \ -+ "loadimage=echo Loading /boot/${image}..; load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \ -+ "loadfdt=echo Loading /boot/dtbs/${fdt_file}..; load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/dtbs/${fdt_file}\0" \ -+ "loadrd=load mmc ${bootpart} ${rdaddr} /boot/${rdfile}\0" \ -+ "mmcboot=mmc dev ${mmcdev}; " \ -+ "if mmc rescan; then " \ -+ "echo SD/MMC found on device ${mmcdev};" \ -+ "setenv bootpart ${mmcdev}:1; " \ -+ "part uuid mmc ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ - "fi; " \ -- "else " \ -- "bootz; " \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "if run loadfdt; then " \ -+ "run mmcargs;" \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdt_addr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdt_addr};" \ -+ "fi;" \ -+ "else " \ -+ "echo Kernel found, but no device tree found;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ -@@ -135,26 +150,17 @@ - "else " \ - "bootz; " \ - "fi;\0" \ -- "findfdt=" \ -- "if test $board_rev = MX6Q ; then " \ -- "setenv fdt_file imx6q-udoo.dtb; fi; " \ -- "if test $board_rev = MX6DL ; then " \ -- "setenv fdt_file imx6dl-udoo.dtb; fi; " \ -- "if test $fdt_file = undefined; then " \ -- "echo WARNING: Could not determine dtb to use; fi; \0" -+ "findfdt=" \ -+ "if test $board_rev = MX6Q ; then " \ -+ "setenv fdt_file imx6q-udoo.dtb; fi; " \ -+ "if test $board_rev = MX6DL ; then " \ -+ "setenv fdt_file imx6dl-udoo.dtb; fi; " \ -+ "if test $fdt_file = undefined; then " \ -+ "echo WARNING: Could not determine dtb to use; fi; \0" - - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadimage; then " \ -- "run mmcboot; " \ -- "else run netboot; " \ -- "fi; " \ -- "fi; " \ -- "else run netboot; fi" -+ "run mmcboot; " - - /* Print Buffer Size */ - #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-7.patch b/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-7.patch deleted file mode 100644 index ca59b159a..000000000 --- a/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-7.patch +++ /dev/null @@ -1,68 +0,0 @@ -diff --git a/include/linux/compiler-gcc7.h b/include/linux/compiler-gcc7.h -new file mode 100644 -index 0000000..ba064fa ---- /dev/null -+++ b/include/linux/compiler-gcc7.h -@@ -0,0 +1,59 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include <linux/compiler-gcc7.h> directly, include <linux/compiler.h> instead." -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __must_check __attribute__((warn_unused_result)) -+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) -+ -+/* Mark functions as cold. gcc will assume any path leading to a call -+ to them will be unlikely. This means a lot of manual unlikely()s -+ are unnecessary now for any paths leading to the usual suspects -+ like BUG(), printk(), panic() etc. [but let's keep them for now for -+ older compilers] -+ -+ gcc also has a __attribute__((__hot__)) to move hot functions into -+ a special section, but I don't see any sense in this right now in -+ the kernel context */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+ -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__)) -+ -+/* -+ * Tell the optimizer that something else uses this function or variable. -+ */ -+#define __visible __attribute__((externally_visible)) -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ -+ -+#define KASAN_ABI_VERSION 4 --- -2.1.4 - diff --git a/libre-testing/uboot4extlinux-udoo/PKGBUILD b/libre-testing/uboot4extlinux-udoo/PKGBUILD deleted file mode 100644 index 532ea1c4c..000000000 --- a/libre-testing/uboot4extlinux-udoo/PKGBUILD +++ /dev/null @@ -1,49 +0,0 @@ -# U-Boot: UDOO -# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info> -# Contributor: André Silva <emulatorman@hyperbola.info> - -pkgname=uboot4extlinux-udoo -pkgver=2016.11 -pkgrel=1.1 -pkgdesc="U-Boot with Extlinux support for UDOO Dual and Quad" -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -conflicts=('uboot-udoo' 'uboot4grub-udoo') -replaces=('uboot4extlinux-udoo_dl' 'uboot4extlinux-udoo_quad') -license=('GPL') -makedepends=('bc' 'swig') -backup=(boot/extlinux/extlinux.conf) -install=${pkgname}.install -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver/rc/-rc}.tar.bz2" - '0001-parabola-arm-modifications.patch' - '0002-kernel-add-support-for-gcc-7.patch' - 'extlinux.conf') -sha256sums=('45813e6565dcc0436abe6752624324cdbf5f3ac106570d76d32b46ec529bcdc8' - '5a93f489208f0f2e9415779770827024e24ca717438c0998499b59b59cd6189d' - '9e80aa27cccdb07b03d56a970f247c91d586d0b936868c076c20acc2e68a3968' - '7398bad545ed40e7809badc2ef0211796402187c1e307e7bd86972624ce4e1bb') - -prepare() { - cd u-boot-${pkgver/rc/-rc} - - patch -Np1 -i ../0001-parabola-arm-modifications.patch - patch -Np1 -i ../0002-kernel-add-support-for-gcc-7.patch -} - -build() { - cd u-boot-${pkgver/rc/-rc} - - unset CFLAGS CXXFLAGS LDFLAGS - - make distclean - make udoo_defconfig - make EXTRAVERSION=-${pkgrel} -} - -package_uboot4extlinux-udoo() { - cd u-boot-${pkgver/rc/-rc} - - mkdir -p "${pkgdir}"/boot/extlinux - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux - cp SPL u-boot.img "${pkgdir}"/boot -} diff --git a/libre-testing/uboot4extlinux-udoo/extlinux.conf b/libre-testing/uboot4extlinux-udoo/extlinux.conf deleted file mode 100644 index 918a679d6..000000000 --- a/libre-testing/uboot4extlinux-udoo/extlinux.conf +++ /dev/null @@ -1,43 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -timeout 50 - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /boot/vmlinuz-linux-libre - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre - -label Parabola GNU/Linux-libre, linux-libre-lts kernel - kernel /boot/vmlinuz-linux-libre-lts - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre-lts - -label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel - kernel /boot/vmlinuz-linux-libre-lts-knock - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre-lts-knock - -label Parabola GNU/Linux-libre, linux-libre-hardened kernel - kernel /boot/vmlinuz-linux-libre-hardened - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre-hardened - -label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel - kernel /boot/vmlinuz-linux-libre-lts-apparmor - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre-lts-apparmor - -label Parabola GNU/Linux-libre, linux-libre-pck kernel - kernel /boot/vmlinuz-linux-libre-pck - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre-pck - -label Parabola GNU/Linux-libre, linux-libre-rt kernel - kernel /boot/vmlinuz-linux-libre-rt - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre-rt - -label Parabola GNU/Linux-libre, linux-libre-xtreme kernel - kernel /boot/vmlinuz-linux-libre-xtreme - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre-xtreme diff --git a/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install b/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install deleted file mode 100644 index 907a8e9f1..000000000 --- a/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install +++ /dev/null @@ -1,27 +0,0 @@ -extlinux_warning() { - echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf" -} - -flash_uboot() { - echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." - echo "Do you want to do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k - dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k - sync - else - echo "You can do this later by running:" - echo "# dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k" - echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k" - fi - extlinux_warning -} - -post_install() { - flash_uboot -} - -post_upgrade() { - flash_uboot -} |