summaryrefslogtreecommitdiff
path: root/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install
diff options
context:
space:
mode:
Diffstat (limited to 'libre-testing/kernel26-libre-lts/kernel26-libre-lts.install')
-rw-r--r--libre-testing/kernel26-libre-lts/kernel26-libre-lts.install147
1 files changed, 0 insertions, 147 deletions
diff --git a/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install b/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install
deleted file mode 100644
index c3249445a..000000000
--- a/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install
+++ /dev/null
@@ -1,147 +0,0 @@
-# arg 1: the new package version
-# arg 2: the old package version
-
-KERNEL_NAME=-lts
-KERNEL_VERSION=2.6.32-lts
-
-post_install () {
- # updating module dependencies
- echo ">>> Updating module dependencies. Please wait ..."
- depmod $KERNEL_VERSION
- # generate init ramdisks
- echo ">>> MKINITCPIO SETUP"
- echo ">>> ----------------"
- echo ">>> If you use LVM2, Encrypted root or software RAID,"
- echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
- echo ">>> More information about mkinitcpio setup can be found here:"
- echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
- echo ""
- echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
- /sbin/mkinitcpio -p kernel26${KERNEL_NAME}
-}
-
-post_upgrade() {
- pacman -Q grub &>/dev/null
- hasgrub=$?
- pacman -Q grub2 &>/dev/null
- hasgrub2=$?
- pacman -Q lilo &>/dev/null
- haslilo=$?
- # reminder notices
- if [ $haslilo -eq 0 ]; then
- echo ">>>"
- if [ $hasgrub -eq 0 -o $hasgrub2 -eq 0 ]; then
- echo ">>> If you use the LILO bootloader, you should run 'lilo' before rebooting."
- else
- echo ">>> You appear to be using the LILO bootloader. You should run"
- echo ">>> 'lilo' before rebooting."
- fi
- echo ">>>"
- fi
-
- if grep "/boot" /etc/fstab 2>&1 >/dev/null; then
- if ! grep "/boot" /etc/mtab 2>&1 >/dev/null; then
- echo "WARNING: /boot appears to be a seperate partition but is not mounted"
- echo " This is most likely not what you want. Please mount your /boot"
- echo " partition and reinstall the kernel unless you are sure this is OK"
- fi
- fi
-
- if [ "`vercmp $2 2.6.13`" -lt 0 ]; then
- # important upgrade notice
- echo ">>>"
- echo ">>> IMPORTANT KERNEL UPGRADE NOTICE"
- echo ">>> -------------------------------"
- echo ">>> As of kernel 2.6.13, DevFS is NO LONGER AVAILABLE!"
- echo ">>> If you still use DevFS, please make the transition to uDev before"
- echo ">>> rebooting. If you really need to stay with DevFS for some reason,"
- echo ">>> then you can manually downgrade to an older version:"
- echo ">>>"
- echo ">>> # pacman -U http://archlinux.org/~judd/kernel/kernel26-scsi-2.6.12.2-1.pkg.tar.gz"
- echo ">>>"
- echo ">>> If you choose to downgrade, don't forget to add kernel26-scsi to your"
- echo ">>> IgnorePkg list in /etc/pacman.conf"
- echo ">>>"
- echo ">>> (NOTE: The following portion applies to uDev users as well!)"
- echo ">>>"
- echo ">>> If you use any DevFS paths in your GRUB menu.lst, then you will not"
- echo ">>> be able to boot! Change your root= parameter to use the classic"
- echo ">>> naming scheme."
- echo ">>>"
- echo ">>> EXAMPLES:"
- echo ">>> - change root=/dev/discs/disc0/part3 to root=/dev/sda3"
- echo ">>> - change root=/dev/md/0 to root=/dev/md0"
- echo ">>>"
- fi
- # generate new init ramdisk
- if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
- echo ">>> --------------------------------------------------------------"
- echo ">>> | WARNING: |"
- echo ">>> |mkinitrd is not supported anymore in kernel >=2.6.18 series!|"
- echo ">>> | Please change to Mkinitcpio setup. |"
- echo ">>> --------------------------------------------------------------"
- echo ">>>"
- fi
- # updating module dependencies
- echo ">>> Updating module dependencies. Please wait ..."
- depmod $KERNEL_VERSION
- echo ">>> MKINITCPIO SETUP"
- echo ">>> ----------------"
- if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
- echo ">>> Please change your bootloader config files:"
- echo ">>> Grub: /boot/grub/menu.lst | Lilo: /etc/lilo.conf"
- echo "------------------------------------------------"
- echo "| - initrd26.img to kernel26${KERNEL_NAME}.img |"
- echo "| - initrd26-full.img to kernel26${KERNEL_NAME}-fallback.img |"
- echo "------------------------------------------------"
- fi
- if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
- echo ""
- echo ">>> New PATA/IDE subsystem - EXPERIMENTAL"
- echo ">>> ----------"
- echo ">>> To use the new pata drivers, change the 'ide' hook "
- echo ">>> to 'pata' in /etc/mkinicpio.conf HOOKS="
- echo ">>> The new system changes: /dev/hd? to /dev/sd?"
- echo ">>> Don't forget to modify GRUB, LILO and fstab to the"
- echo ">>> new naming system. "
- echo ">>> eg: hda3 --> sda3, hdc8 --> sdc8"
- echo ""
- echo ">>> piix/ata_piix (Intel chipsets) - IMPORTANT"
- echo "----------"
- echo ">>> If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf"
- echo ">>> the 'ata_piix' module will be used."
- echo ">>> This may cause your devices to shift names, eg:"
- echo ">>> - IDE: devices from hd? to sd?"
- echo ">>> - SATA: sda might shift to sdc if you have 2 other disks on a PIIX IDE port."
- echo ">>> To check if this will affect you, check 'mkinitcpio -M' for piix/ata_piix"
- echo ""
- fi
-
- echo ">>> If you use LVM2, Encrypted root or software RAID,"
- echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
- echo ">>> More information about mkinitcpio setup can be found here:"
- echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
- echo ""
- echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
-if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
- /sbin/mkinitcpio -p kernel26${KERNEL_NAME} -m "ATTENTION:\nIf you get a kernel panic below
-and are using an Intel chipset, append 'earlymodules=piix' to the
-kernel commandline"
-else
- /sbin/mkinitcpio -p kernel26${KERNEL_NAME}
-fi
-if [ "`vercmp $2 2.6.21`" -lt 0 ]; then
- echo ""
- echo "Important ACPI Information:"
- echo ">>> Since 2.6.20.7 all possible ACPI parts are modularized."
- echo ">>> The modules are located at:"
- echo ">>> /lib/modules/$(uname -r)/kernel/drivers/acpi"
- echo ">>> For more information about ACPI modules check this wiki page:"
- echo ">>> 'http://wiki.archlinux.org/index.php/ACPI_modules'"
-fi
-}
-
-post_remove() {
- rm -f /boot/kernel26${KERNEL_NAME}.img
- rm -f /boot/kernel26${KERNEL_NAME}-fallback.img
-}