summaryrefslogtreecommitdiff
path: root/kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch
diff options
context:
space:
mode:
Diffstat (limited to 'kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch')
-rw-r--r--kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch80
1 files changed, 80 insertions, 0 deletions
diff --git a/kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch b/kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch
new file mode 100644
index 000000000..8e8a085c9
--- /dev/null
+++ b/kernels/linux-libre-lts-xtreme/0013-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch
@@ -0,0 +1,80 @@
+From 74bb546b27536c3f9bdd16080a915d98e8c1667f Mon Sep 17 00:00:00 2001
+From: Peter Chen <peter.chen@nxp.com>
+Date: Wed, 21 Jun 2017 14:42:07 +0800
+Subject: [PATCH 13/14] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB
+ property
+
+The current dts describes USB HUB's property at USB controller's
+entry, it is improper. The USB HUB should be the child node
+under USB controller, and power sequence properties are under
+it. Besides, using gpio pinctrl setting for USB2415's reset pin.
+
+Signed-off-by: Peter Chen <peter.chen@nxp.com>
+Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
+Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+---
+ arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 ++++++++++++--------------
+ 1 file changed, 12 insertions(+), 14 deletions(-)
+
+diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+index c96c91d83678..a173de20ee73 100644
+--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+@@ -9,6 +9,8 @@
+ *
+ */
+
++#include <dt-bindings/gpio/gpio.h>
++
+ / {
+ aliases {
+ backlight = &backlight;
+@@ -58,17 +60,6 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- reg_usb_h1_vbus: regulator@0 {
+- compatible = "regulator-fixed";
+- reg = <0>;
+- regulator-name = "usb_h1_vbus";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- enable-active-high;
+- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+- gpio = <&gpio7 12 0>;
+- };
+-
+ reg_panel: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+@@ -188,7 +179,7 @@
+
+ pinctrl_usbh: usbhgrp {
+ fsl,pins = <
+- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
++ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+ >;
+ };
+@@ -259,9 +250,16 @@
+ &usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh>;
+- vbus-supply = <&reg_usb_h1_vbus>;
+- clocks = <&clks IMX6QDL_CLK_CKO>;
+ status = "okay";
++
++ usb2415: hub@1 {
++ compatible = "usb424,2514";
++ reg = <1>;
++
++ clocks = <&clks IMX6QDL_CLK_CKO>;
++ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
++ reset-duration-us = <3000>;
++ };
+ };
+
+ &usdhc3 {
+--
+2.16.1
+