diff options
Diffstat (limited to 'kernels/linux-libre-lts-knock/PKGBUILD')
| -rw-r--r-- | kernels/linux-libre-lts-knock/PKGBUILD | 193 |
1 files changed, 68 insertions, 125 deletions
diff --git a/kernels/linux-libre-lts-knock/PKGBUILD b/kernels/linux-libre-lts-knock/PKGBUILD index ed0f4ac77..2d72f2169 100644 --- a/kernels/linux-libre-lts-knock/PKGBUILD +++ b/kernels/linux-libre-lts-knock/PKGBUILD @@ -7,65 +7,69 @@ # Contributor: Márcio Silva <coadde@parabola.nu> # Contributor: Luke Shumaker <lukeshu@sbcglobal.net> -pkgbase=linux-libre-lts-knock # Build stock -libre-lts-knock kernel -#pkgbase=linux-libre-custom # Build kernel with a different name -_basekernel=3.10 -_sublevel=53 -_knockpatchver=${_basekernel} -pkgver=${_basekernel}.${_sublevel} +pkgbase=linux-libre-lts-knock # Build stock -lts-knock kernel +_pkgbasever=3.10-gnu +_pkgver=3.10.53-gnu +_knockpatchver=3.10 + +_replaces=('kernel26%' 'kernel26-libre%' 'linux%' 'linux-libre%-kmod-alx') # '%' gets replaced with _kernelname + +_srcname=linux-${_pkgbasever%-*} +pkgver=${_pkgver//-/.} pkgrel=1 -_lxopkgver=${_basekernel}.52 # nearly always the same as pkgver arch=('i686' 'x86_64' 'mips64el') url="https://gnunet.org/knock" license=('GPL2') makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc') options=('!strip') -source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gnu/linux-libre-${_basekernel}-gnu.tar.xz" - "http://linux-libre.fsfla.org/pub/linux-libre/releases/${pkgver}-gnu/patch-${_basekernel}-gnu-${pkgver}-gnu.xz" +source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/linux-libre-${_pkgbasever}.tar.xz" + "http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_pkgbasever}-${_pkgver}.xz" "http://gnunet.org/sites/default/files/tcp_stealth_${_knockpatchver}.diff" # the main kernel config files - 'config.i686' 'config.x86_64' + 'config.i686' 'config.x86_64' 'config.mips64el' # standard config files for mkinitcpio ramdisk - "${pkgbase}.preset" - 'Kbuild' - 'Kbuild.platforms' - 'boot-logo.patch' + 'linux.preset' + 'logo_linux_'{clut224.ppm,vga16.ppm,mono.pbm} 'change-default-console-loglevel.patch' 'criu-no-expert.patch' - "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.xz") + # loongson-community patch: http://linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/ + '3.10.50-33c9ab76eb-loongson-community.patch') md5sums=('d562fd52580a3b6b18b6eeb5921d1d5c' '4840f0db6af66cbce923b1043971c256' '26380d6f05471ef8e065a77d87588009' '25ad0606de251a5734f4535c61452a56' '158cb922d9b43028f6c45c696e773915' - '02023949955a138c44bb0c46227a6d18' - '2967cecc3af9f954ccc822fd63dca6ff' - '8267264d9a8966e57fdacd1fa1fc65c4' - '04b21c79df0a952c22d681dd4f4562df' + '' + 'eb14dcfd80c00852ef81ded6e826826a' + '071d4939e9ef4256e4c027ef3c864903' + '2ae9ef17f45b39ff9e6e172c0c97d263' + '96c2ae40e3b1cdd90fe7e6dba8078922' 'f3def2cefdcbb954c21d8505d23cc83c' 'd50c1ac47394e9aec637002ef3392bd1' - '200668954d1cee93fb649196e3df8bde') -if [ "$CARCH" != "mips64el" ]; then - # don't use the Loongson-specific patches on non-mips64el arches. - unset source[${#source[@]}-1] - unset md5sums[${#md5sums[@]}-1] -fi + '') _kernelname=${pkgbase#linux-libre} -_localversionname=-libre-lts-knock +_replaces=("${_replaces[@]/\%/${_kernelname}}") + +case "$CARCH" in + i686|x86_64) KARCH=x86;; + mips64el) KARCH=mips;; +esac prepare() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" - if [ "${_basekernel}" != "${pkgver}" ]; then - patch -Np1 -i "${srcdir}/patch-${_basekernel}-gnu-${pkgver}-gnu" + # add upstream patch + if [ "${_pkgbasever}" != "${_pkgver}" ]; then + patch -p1 -i "${srcdir}/patch-${_pkgbasever}-${_pkgver}" fi # add knock patch patch -p1 -i "${srcdir}/tcp_stealth_${_knockpatchver}.diff" # add freedo as boot logo - patch -Np1 -i "${srcdir}/boot-logo.patch" + install -m644 -t drivers/video/logo \ + "${srcdir}/logo_linux_"{clut224.ppm,vga16.ppm,mono.pbm} # add latest fixes from stable queue, if needed # http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git @@ -79,42 +83,22 @@ prepare() { # patch from fedora patch -Np1 -i "${srcdir}/criu-no-expert.patch" - if [ "$CARCH" == "mips64el" ]; then - sed -i "s|^EXTRAVERSION.*|EXTRAVERSION =-libre-lts-knock|" Makefile - sed -r "s|^( SUBLEVEL = ).*|\1$_sublevel|" \ - < "${srcdir}/lxo-config.patch" > lxo-config.patch - msg2 "Adding loongson-community patches" - patch -Np1 -i ${srcdir}/${_basekernel}*-*-loongson-community.patch - patch -Np0 -i lxo-config.patch - - # ensure N32, add localversion, remove uevent helper as per - # https://git.kernel.org/?p=linux/hotplug/udev.git;a=blob_plain;f=README - # and make USB storage support builtin (e.g. for booting from USB - # disks without slowly loading an initramfs) - sed -ri \ - -e "s|CONFIG_MIPS32_N32=.*|CONFIG_MIPS32_N32=y|g" \ - -e "s|CONFIG_UEVENT_HELPER_PATH=.*|CONFIG_UEVENT_HELPER_PATH=\"\"|g" \ - -e "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" \ - -e "s;(CONFIG_USB(_COMMON|_EHCI_HCD|_OHCI_HCD|_STORAGE.*|_UAS)?)=.*;\1=y;g" \ - ./.config - else - cat "${srcdir}/config.${CARCH}" > ./.config # simpler + # Adding loongson-community patch + if [ "${CARCH}" == "mips64el" ]; then + patch -p1 -i ${srcdir}/3.10.50-33c9ab76eb-loongson-community.patch fi - if [ "${_kernelname}" != "" ]; then - sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" ./.config - sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config - fi + cat "${srcdir}/config.${CARCH}" > ./.config - # set extraversion to pkgrel - sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile + # append pkgrel to extraversion + sed -ri "s|^(EXTRAVERSION =.*\S).*|\1-${pkgrel}|" Makefile # don't run depmod on 'make install'. We'll do this ourselves in packaging sed -i '2iexit 0' scripts/depmod.sh } build() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" # get kernel version make prepare @@ -131,10 +115,12 @@ build() { yes "" | make config >/dev/null # save configuration for later reuse - if [ "${CARCH}" = "x86_64" ]; then - cat .config > "${startdir}/config.x86_64.last" - else + if [ "${CARCH}" = "i686" ]; then cat .config > "${startdir}/config.i686.last" + elif [ "${CARCH}" = "x86_64" ]; then + cat .config > "${startdir}/config.x86_64.last" + elif [ "${CARCH}" = "mips64el" ]; then + cat .config > "${startdir}/config.mips64el.last" fi #################### @@ -144,39 +130,21 @@ build() { #################### # build! - if [ "$CARCH" == "mips64el" ]; then - # The build system passes it directly to linker, disable to avoid - # having unknown -Wl,... options. - export LDFLAGS="" - # bzImage is arch-specific and not supported on mips; vmlinux is - # useful for oprofile. - make ${MAKEFLAGS} LOCALVERSION= vmlinux vmlinuz modules - else - make ${MAKEFLAGS} LOCALVERSION= bzImage modules - fi + make ${MAKEFLAGS} LOCALVERSION= bzImage modules } _package() { pkgdesc="The ${pkgbase^} kernel and modules - stable longtime supported kernel package suitable for servers with support for stealth TCP sockets" [ "${pkgbase}" = "linux-libre" ] && groups=('base') - depends=('coreutils' 'linux-libre-firmware' 'kmod') + depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7') optdepends=('crda: to set the correct wireless channels of your country') - provides=("kernel26${_kernelname}=${pkgver}" "linux${_kernelname}=${pkgver}" "linux${_kernelname/-lts/}") - conflicts=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}" "linux${_kernelname/-lts/}" "linux-libre${_kernelname/-lts/}") - replaces=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}" "linux${_kernelname/-lts/}" "linux-libre${_kernelname/-lts/}") + provides=( "${_replaces[@]/%/=${pkgver}}") + conflicts=("${_replaces[@]}") + replaces=( "${_replaces[@]}") backup=("etc/mkinitcpio.d/${pkgbase}.preset") - install=${pkgbase}.install - if [ "$CARCH" = "mips64el" ]; then - optdepends+=('mkinitcpio: to make the initramfs (needs reinstall of this package)') - conflicts+=('mkinitcpio<0.7') - else - depends+=('mkinitcpio>=0.7') - fi + install=linux.install - cd "${srcdir}/linux-${_basekernel}" - - KARCH=x86 - [ $CARCH = "mips64el" ] && KARCH=mips + cd "${srcdir}/${_srcname} # get kernel version _kernver="$(make LOCALVERSION= kernelrelease)" @@ -186,12 +154,7 @@ _package() { mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot} make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install - if [ "$CARCH" == "mips64el" ]; then - cp vmlinuz "${pkgdir}/boot/vmlinuz-${pkgbase}" - cp vmlinux "${pkgdir}/boot/vmlinux-${pkgbase}" - else - cp arch/${KARCH}/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}" - fi + cp arch/${KARCH}/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}" # add vmlinux install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux" @@ -205,20 +168,14 @@ _package() { -i "${startdir}/${install}" # install mkinitcpio preset file for kernel - install -D -m644 "${srcdir}/${pkgbase}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" + install -D -m644 "${srcdir}/linux.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" sed \ - -e "1s|'linux*.*'|'${pkgbase}'|" \ + -e "1s|'linux.*'|'${pkgbase}'|" \ -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \ -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \ -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \ -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" - # mkinitcpio 0.7 relies on bzImage to find the kernel version - if [ "$CARCH" == "mips64el" ]; then - sed -e "s|ALL_kver=.*|ALL_kver=\"${_kernver}\"|" \ - -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" - fi - # remove build and source links rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build} # remove the firmware @@ -226,10 +183,10 @@ _package() { # gzip -9 all modules to save 100MB of space find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \; # make room for external modules - ln -s "../extramodules-${_basekernel}${_localversionname:--libre-lts-knock}" "${pkgdir}/lib/modules/${_kernver}/extramodules" + ln -s "../extramodules-${_basekernel}${_kernelname}" "${pkgdir}/lib/modules/${_kernver}/extramodules" # add real version for building modules and running depmod from post_install/upgrade - mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-lts-knock}" - echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-lts-knock}/version" + mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}" + echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}/version" # Now we call depmod... depmod -b "$pkgdir" -F System.map "$_kernver" @@ -240,12 +197,9 @@ _package() { _package-headers() { pkgdesc="Header files and scripts for building modules for ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-headers=${pkgver}" "linux${_kernelname}-headers=${pkgver}" "linux${_kernelname/-lts/}-headers") - conflicts=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers" "linux${_kernelname/-lts/}-headers" "linux-libre${_kernelname/-lts/}-headers") - replaces=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers" "linux${_kernelname/-lts/}-headers" "linux-libre${_kernelname/-lts/}-headers") - - KARCH=x86 - [ $CARCH = "mips64el" ] && KARCH=mips + provides=( "${_replaces[@]/%/-headers=${pkgver}}") + conflicts=("${_replaces[@]/%/-headers}") + replaces=( "${_replaces[@]/%/-headers}") # in case of repackaging this is empty if [ -z "${_kernver}" ]; then @@ -258,7 +212,7 @@ _package-headers() { cd "${pkgdir}/usr/lib/modules/${_kernver}" ln -sf ../../../src/linux-${_kernver} build - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" install -D -m644 Makefile \ "${pkgdir}/usr/src/linux-${_kernver}/Makefile" install -D -m644 kernel/Makefile \ @@ -281,12 +235,6 @@ _package-headers() { cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}" cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}" - if [ "$CARCH" = "mips64el" ]; then - cp arch/${KARCH}/Kbuild "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/" - cp -a arch/${KARCH}/loongson "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/" - cp ${srcdir}/Kbuild.platforms "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/" - fi - # fix permissions on scripts dir chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts" mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions" @@ -390,21 +338,16 @@ _package-headers() { done # remove unneeded architectures - rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa} - if [ "$CARCH" = "mips64el" ]; then - rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/x86 - else - rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/mips - fi + find "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch -mindepth 1 -maxdepth 1 -type d -not -name "$KARCH" -exec rm -rf {} + } _package-docs() { pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-docs=${pkgver}" "linux${_kernelname}-docs=${pkgver}" "linux${_kernelname/-lts/}-docs") - conflicts=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs" "linux${_kernelname/-lts/}-docs" "linux-libre${_kernelname/-lts/}-docs") - replaces=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs" "linux${_kernelname/-lts/}-docs" "linux-libre${_kernelname/-lts/}-docs") + provides=( "${_replaces[@]/%/-docs=${pkgver}}") + conflicts=("${_replaces[@]/%/-docs}") + replaces=( "${_replaces[@]/%/-docs}") - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" mkdir -p "${pkgdir}/usr/src/linux-${_kernver}" cp -al Documentation "${pkgdir}/usr/src/linux-${_kernver}" |