move xtrx related packages from pcr-testing to pcr

The pakcages have been tested and work on x86_64.

I successfully received commercial FM radio stations
with it with the following settings:

I/O devices configuration:
--------------------------
Device: other
Device String: xtrx
Input Rate: 5000000
Decimation: None
Sample rate: 5Msps
Banwith: 1.000000 MHz
LNO LB:  0.000000 Mhz

Input control:
--------------
LNA gain: 22 db
TIA gain:  9 db
PGA gain: 12 db
 LB gain:  0 db
Swap I/Q   []
DC Remove  []
No limits  []
IQ balance []
Freq. correction: 0.0 ppm
Antenna: RXL
Reset frequency controller digits []

Note that the chosen Antenna is specific to my setup.

TODO:
- Make the package install in /usr/ instead of /usr/local
- Validate the packages on i686 and armv7h
- Package the kernel module
- Package the other libraries required for the USB3 support.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>

1 files changed, 0 insertions, 45 deletions

diff --git a/pcr-testing/gnuradio-osmosdr-xtrx/PKGBUILD b/pcr-testing/gnuradio-osmosdr-xtrx/PKGBUILD
deleted file mode 100644
index 5fbcaa54a..000000000
--- a/pcr-testing/gnuradio-osmosdr-xtrx/PKGBUILD
+++ /dev/null
@@ -1,45 +0,0 @@
-# $Id$
-# Maintainer: Kyle Keen <keenerd@gmail.com?>
-# Contributor: Dominik Heidler <dheidler@gmail.com>
-# Contributor: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
-pkgname=gnuradio-osmosdr-xtrx
-_pkgname=gr-osmosdr
-pkgver=0.1.4+git
-pkgrel=26
-pkgdesc="Source block for Funcube Dongle, RTL-SDR, USRP, OsmoSDR, BladeRF, HackRF and AirSpy devices"
-url="http://sdr.osmocom.org/trac/"
-arch=(armv7h i686 x86_64)
-license=('GPL')
-depends=('gnuradio' 'gnuradio-iqbal' 'rtl-sdr' 'gnuradio-fcdproplus' 'hackrf' 'bladerf' 'airspy')
-optdepends=('python2-opengl: osmocom_fft')
-makedepends=('git' 'cmake' 'boost' 'python2-cheetah' 'swig')
-conflicts=('gr-osmosdr-git' 'gnuradio-osmosdr')
-branch=libxtrx
-source=("git://github.com/xtrx-sdr/gr-osmosdr.git#branch=$branch")
-md5sums=('SKIP')
-
-# add support for miri, osmo?
-
-prepare() {
-  cd "$srcdir/$_pkgname"
-  sed -i 's/python$/python2/' apps/osmocom_siggen_base.py
-}
-
-build() {
-  cd "$srcdir/$_pkgname"
-  mkdir build
-  cd build
-  cmake \
-    -Wno-dev \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DPYTHON_EXECUTABLE=$(which python2) \
-    -DPYTHON_INCLUDE_DIR=$(echo /usr/include/python2*) \
-    -DPYTHON_LIBRARY=$(echo /usr/lib/libpython2.*.so) \
-    -DCMAKE_INSTALL_PREFIX=/usr ../
-  make
-}
-
-package() {
-  cd "$srcdir/$_pkgname/build/"
-  make DESTDIR="${pkgdir}" install
-}