libre: uboot4extlinux-sunxi: fix images path

All packages built fine.

This was also tested on a Lime2-EMMC:
- Booting worked fine with a extliux.conf tailored for the
  configuration of the device being tested.
- An external display was connected to it and it worked
  in u-boot, during boot and showed a console at the end.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>

1 files changed, 2 insertions, 2 deletions

diff --git a/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install b/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install
index 4419c21af..46f8304cd 100644
--- a/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install
+++ b/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install
@@ -1,5 +1,5 @@
 flash_instructions() {
-  echo "# dd if=/boot/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8"
+  echo "# dd if=/boot/u-boot/images/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8"
 }
 
 extlinux_warning() {
@@ -14,7 +14,7 @@ flash_uboot() {
     echo "Do you want to do this now? [y|N]"
     read -r shouldwe
     if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
-      dd if=/boot/u-boot-sunxi-with-spl.bin of=$root bs=1024 seek=8
+      dd if=/boot/u-boot/images/u-boot-sunxi-with-spl.bin of=$root bs=1024 seek=8
     else
       echo "You can do this later by running:"
       flash_instructions