uboot-udoo: add new package to [libre]

4 files changed, 576 insertions, 0 deletions

diff --git a/libre/uboot-udoo/0001-parabola-arm-modifications.patch b/libre/uboot-udoo/0001-parabola-arm-modifications.patch
new file mode 100644
index 000000000..7fd54e8f3
--- /dev/null
+++ b/libre/uboot-udoo/0001-parabola-arm-modifications.patch
@@ -0,0 +1,391 @@
+diff --git a/board/udoo/1066mhz_4x256mx16_dl.cfg b/board/udoo/1066mhz_4x256mx16_dl.cfg
+new file mode 100644
+index 0000000..e37c9f9
+--- /dev/null
++++ b/board/udoo/1066mhz_4x256mx16_dl.cfg
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (C) 2013 Seco USA Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++
++DATA 4, MX6_MMDC_P0_MDPDC,	0x0002002D
++DATA 4, MX6_MMDC_P0_MDOTC,	0x00333040
++
++DATA 4, MX6_MMDC_P0_MDCFG0,	0x3F4352F3
++DATA 4, MX6_MMDC_P0_MDCFG1,	0xB66D8B63
++DATA 4, MX6_MMDC_P0_MDCFG2,	0x01FF00DB
++
++DATA 4, MX6_MMDC_P0_MDMISC,	0x00001740
++DATA 4, MX6_MMDC_P0_MDSCR,	0x00008000
++DATA 4, MX6_MMDC_P0_MDRWD,	0x000026D2
++
++
++DATA 4, MX6_MMDC_P0_MDOR,	0x00431023
++DATA 4, MX6_MMDC_P0_MDASP,	0x00000027
++DATA 4, MX6_MMDC_P0_MDCTL,	0x831A0000
++
++DATA 4, MX6_MMDC_P0_MDSCR,	0x02008032
++DATA 4, MX6_MMDC_P0_MDSCR,	0x00008033
++DATA 4, MX6_MMDC_P0_MDSCR,	0x00048031
++DATA 4, MX6_MMDC_P0_MDSCR,	0x05208030
++DATA 4, MX6_MMDC_P0_MDSCR,	0x04008040
++
++DATA 4, MX6_MMDC_P0_MPZQHWCTRL,	0xa1390003
++DATA 4, MX6_MMDC_P1_MPZQHWCTRL,	0xa1390003
++
++DATA 4, MX6_MMDC_P0_MDREF,	0x00007800
++
++DATA 4, MX6_MMDC_P0_MPODTCTRL,	0x00022227
++DATA 4, MX6_MMDC_P1_MPODTCTRL,	0x00022227
++
++DATA 4, MX6_MMDC_P0_MPDGCTRL0,	0x425C0251
++DATA 4, MX6_MMDC_P0_MPDGCTRL1,	0x021B021E
++DATA 4, MX6_MMDC_P1_MPDGCTRL0,	0x021B021E
++DATA 4, MX6_MMDC_P1_MPDGCTRL1,	0x01730200
++
++DATA 4, MX6_MMDC_P0_MPRDDLCTL,	0x45474C45
++DATA 4, MX6_MMDC_P1_MPRDDLCTL,	0x44464744
++DATA 4, MX6_MMDC_P0_MPWRDLCTL,	0x3F3F3336
++DATA 4, MX6_MMDC_P1_MPWRDLCTL,	0x32383630
++
++DATA 4, MX6_MMDC_P0_MPWLDECTRL0,	0x002F0038
++DATA 4, MX6_MMDC_P0_MPWLDECTRL1,	0x001F001F
++DATA 4, MX6_MMDC_P1_MPWLDECTRL0,	0x001F001F
++DATA 4, MX6_MMDC_P1_MPWLDECTRL1,	0x001F001F
++
++DATA 4, MX6_MMDC_P0_MPMUR0,	0x00000000
++DATA 4, MX6_MMDC_P1_MPMUR0,	0x00000000
++
++DATA 4, MX6_MMDC_P0_MDPDC,	0x0002556D
++DATA 4, MX6_MMDC_P0_MAPSR,	0x00011006
++DATA 4, MX6_MMDC_P0_MDSCR,	0x00000000
+diff --git a/board/udoo/ddr-setup_dl.cfg b/board/udoo/ddr-setup_dl.cfg
+new file mode 100644
+index 0000000..487570e
+--- /dev/null
++++ b/board/udoo/ddr-setup_dl.cfg
+@@ -0,0 +1,84 @@
++/*
++ * Copyright (C) 2013 Seco USA Inc
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ *
++ * Device Configuration Data (DCD)
++ *
++ * Each entry must have the format:
++ * Addr-type           Address        Value
++ *
++ * where:
++ *      Addr-type register length (1,2 or 4 bytes)
++ *      Address   absolute address of the register
++ *      value     value to be stored in the register
++ */
++
++/*
++ * DDR3 settings
++ * MX6Q    ddr is limited to 1066 Mhz	currently 1056 MHz(528 MHz clock),
++ *	   memory bus width: 64 bits	x16/x32/x64
++ * MX6DL   ddr is limited to 800 MHz(400 MHz clock)
++ *	   memory bus width: 64 bits	x16/x32/x64
++ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
++ *	   memory bus width: 32 bits	x16/x32
++ */
++DATA 4, MX6_IOM_DRAM_SDQS0,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDQS1,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDQS2,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDQS3,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDQS4,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDQS5,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDQS6,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDQS7,	0x00000028
++
++DATA 4, MX6_IOM_GRP_B0DS,	0x00000028
++DATA 4, MX6_IOM_GRP_B1DS,	0x00000028
++DATA 4, MX6_IOM_GRP_B2DS,	0x00000028
++DATA 4, MX6_IOM_GRP_B3DS,	0x00000028
++DATA 4, MX6_IOM_GRP_B4DS,	0x00000028
++DATA 4, MX6_IOM_GRP_B5DS,	0x00000028
++DATA 4, MX6_IOM_GRP_B6DS,	0x00000028
++DATA 4, MX6_IOM_GRP_B7DS,	0x00000028
++DATA 4, MX6_IOM_GRP_ADDDS,	0x00000028
++
++DATA 4, MX6_IOM_GRP_CTLDS,	0x00000028
++
++DATA 4, MX6_IOM_DRAM_DQM0,	0x00000028
++DATA 4, MX6_IOM_DRAM_DQM1,	0x00000028
++DATA 4, MX6_IOM_DRAM_DQM2,	0x00000028
++DATA 4, MX6_IOM_DRAM_DQM3,	0x00000028
++DATA 4, MX6_IOM_DRAM_DQM4,	0x00000028
++DATA 4, MX6_IOM_DRAM_DQM5,	0x00000028
++DATA 4, MX6_IOM_DRAM_DQM6,	0x00000028
++DATA 4, MX6_IOM_DRAM_DQM7,	0x00000028
++
++DATA 4, MX6_IOM_DRAM_CAS,	0x00000028
++DATA 4, MX6_IOM_DRAM_RAS,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDCLK_0,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDCLK_1,	0x00000028
++
++DATA 4, MX6_IOM_DRAM_RESET,	0x00000028
++
++DATA 4, MX6_IOM_DRAM_SDODT0,	0x00000028
++DATA 4, MX6_IOM_DRAM_SDODT1,	0x00000028
++
++/* (differential input) */
++DATA 4, MX6_IOM_DDRMODE_CTL,	0x00020000
++/* (differential input) */
++DATA 4, MX6_IOM_GRP_DDRMODE,	0x00020000
++/* disable ddr pullups */
++DATA 4, MX6_IOM_GRP_DDRPKE,	0x00000000
++DATA 4, MX6_IOM_DRAM_SDBA2,	0x00000000
++/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
++DATA 4, MX6_IOM_GRP_DDR_TYPE,	0x000C0000
++
++/* Read data DQ Byte0-3 delay */
++DATA 4, MX6_MMDC_P0_MPRDDQBY0DL,	0x33333333
++DATA 4, MX6_MMDC_P0_MPRDDQBY1DL,	0x33333333
++DATA 4, MX6_MMDC_P0_MPRDDQBY2DL,	0x33333333
++DATA 4, MX6_MMDC_P0_MPRDDQBY3DL,	0x33333333
++DATA 4, MX6_MMDC_P1_MPRDDQBY0DL,	0x33333333
++DATA 4, MX6_MMDC_P1_MPRDDQBY1DL,	0x33333333
++DATA 4, MX6_MMDC_P1_MPRDDQBY2DL,	0x33333333
++DATA 4, MX6_MMDC_P1_MPRDDQBY3DL,	0x33333333
+diff --git a/board/udoo/udoo-dl.cfg b/board/udoo/udoo-dl.cfg
+new file mode 100644
+index 0000000..46953c1
+--- /dev/null
++++ b/board/udoo/udoo-dl.cfg
+@@ -0,0 +1,29 @@
++/*
++ * Copyright (C) 2013 Boundary Devices
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ *
++ * Refer doc/README.imximage for more details about how-to configure
++ * and create imximage boot image
++ *
++ * The syntax is taken as close as possible with the kwbimage
++ */
++
++/* image version */
++IMAGE_VERSION 2
++
++/*
++ * Boot Device : one of
++ * spi, sd (the board has no nand neither onenand)
++ */
++BOOT_FROM      sd
++
++#define __ASSEMBLY__
++#include <config.h>
++#include "asm/arch/mx6-ddr.h"
++#include "asm/arch/iomux.h"
++#include "asm/arch/crm_regs.h"
++
++#include "ddr-setup_dl.cfg"
++#include "1066mhz_4x256mx16_dl.cfg"
++#include "clocks.cfg"
+diff --git a/configs/udoo_dl_defconfig b/configs/udoo_dl_defconfig
+new file mode 100644
+index 0000000..5dc9016
+--- /dev/null
++++ b/configs/udoo_dl_defconfig
+@@ -0,0 +1,3 @@
++CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024"
++CONFIG_ARM=y
++CONFIG_TARGET_UDOO=y
+diff --git a/include/configs/udoo.h b/include/configs/udoo.h
+index 700e9c1..7fdce0f 100644
+--- a/include/configs/udoo.h
++++ b/include/configs/udoo.h
+@@ -78,7 +78,7 @@
+ #define CONFIG_CMD_BMODE
+ #define CONFIG_CMD_SETEXPR
+ 
+-#define CONFIG_BOOTDELAY		3
++#define CONFIG_BOOTDELAY		1
+ 
+ #define CONFIG_SYS_MEMTEST_START	0x10000000
+ #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
+@@ -96,60 +96,97 @@
+ #define CONFIG_BOUNCE_BUFFER
+ #define CONFIG_CMD_EXT2
+ #define CONFIG_CMD_FAT
++#define CONFIG_CMD_EXT4
++#define CONFIG_CMD_FS_GENERIC
+ #define CONFIG_DOS_PARTITION
+ 
++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
++
++#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
++#define CONFIG_DEFAULT_FDT_FILE		"imx6dl-udoo.dtb"
++#elif defined(CONFIG_MX6Q)
+ #define CONFIG_DEFAULT_FDT_FILE		"imx6q-udoo.dtb"
++#endif
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+-	"script=boot.scr\0" \
+-	"image=zImage\0" \
+-	"console=ttymxc1\0" \
++	"bootfile=vmlinuz-linux-libre\0" \
++	"bootdir=/boot\0" \
++	"console=ttymxc1,115200\0" \
+ 	"splashpos=m,m\0" \
+ 	"fdt_high=0xffffffff\0" \
++	"rdaddr=0x12A00000\0" \
++	"rdfile=initramfs-linux-libre.img\0" \
+ 	"initrd_high=0xffffffff\0" \
+-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+-	"fdt_addr=0x18000000\0" \
+-	"boot_fdt=try\0" \
++	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
++	"fdtdir=/boot/dtbs/linux-libre\0" \
++	"fdtaddr=0x18000000\0" \
+ 	"ip_dyn=yes\0" \
++	"optargs=\0" \
++	"video=\0" \
+ 	"mmcdev=0\0" \
+-	"mmcpart=1\0" \
+-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+-	"update_sd_firmware_filename=u-boot.imx\0" \
+-	"update_sd_firmware=" \
+-		"if test ${ip_dyn} = yes; then " \
+-			"setenv get_cmd dhcp; " \
++	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
++	"mmcargs=setenv bootargs console=${console} " \
++		"${optargs} " \
++		"root=${mmcroot} " \
++		"video=${video}\0" \
++	"videoargs=" \
++		"setenv nextcon 0; " \
++		"if hdmidet; then " \
++			"setenv bootargs ${bootargs} " \
++				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
++					"if=RGB24; " \
++			"setenv fbmem fbmem=28M; " \
++			"setexpr nextcon ${nextcon} + 1; " \
+ 		"else " \
+-			"setenv get_cmd tftp; " \
++			"echo - no HDMI monitor;" \
+ 		"fi; " \
+-		"if mmc dev ${mmcdev}; then "	\
+-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
+-				"setexpr fw_sz ${filesize} / 0x200; " \
+-				"setexpr fw_sz ${fw_sz} + 1; "	\
+-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+-			"fi; "	\
+-		"fi\0" \
+-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+-		"root=${mmcroot}\0" \
+-	"loadbootscript=" \
+-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+-	"bootscript=echo Running bootscript from mmc ...; " \
+-		"source\0" \
+-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+-	"mmcboot=echo Booting from mmc ...; " \
+-		"run mmcargs; " \
+-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+-			"if run loadfdt; then " \
+-				"bootz ${loadaddr} - ${fdt_addr}; " \
++		"i2c dev 1; " \
++		"if i2c probe 0x10; then " \
++			"setenv bootargs ${bootargs} " \
++				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
++					"if=RGB666; " \
++			"if test 0 -eq ${nextcon}; then " \
++				"setenv fbmem fbmem=10M; " \
+ 			"else " \
+-				"if test ${boot_fdt} = try; then " \
+-					"bootz; " \
+-				"else " \
+-					"echo WARN: Cannot load the DT; " \
+-				"fi; " \
++				"setenv fbmem ${fbmem},10M; " \
+ 			"fi; " \
++			"setexpr nextcon ${nextcon} + 1; " \
+ 		"else " \
+-			"bootz; " \
++			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
++		"fi; " \
++		"setenv bootargs ${bootargs} ${fbmem}\0" \
++	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++	"loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
++	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++	"mmcboot=mmc dev ${mmcdev}; " \
++		"if mmc rescan; then " \
++			"echo SD/MMC found on device ${mmcdev};" \
++			"setenv bootpart ${mmcdev}:1; " \
++			"echo Checking for: ${bootdir}/uEnv.txt ...;" \
++			"if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \
++				"load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
++				"env import -t ${loadaddr} ${filesize};" \
++				"echo Loaded environment from ${bootdir}/uEnv.txt;" \
++				"echo Checking if uenvcmd is set ...;" \
++				"if test -n ${uenvcmd}; then " \
++					"echo Running uenvcmd ...;" \
++					"run uenvcmd;" \
++				"fi;" \
++			"fi; " \
++			"if run loadimage; then " \
++				"if run loadfdt; then " \
++					"run mmcargs;" \
++					"if run loadrd; then " \
++						"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
++					"else " \
++						"bootz ${loadaddr} - ${fdtaddr};" \
++					"fi;" \
++				"else " \
++					"echo Kernel found, but no device tree found;" \
++				"fi;" \
++			"else " \
++				"echo No kernel found;" \
++			"fi;" \
+ 		"fi;\0" \
+ 	"netargs=setenv bootargs console=${console},${baudrate} " \
+ 		"root=/dev/nfs " \
+@@ -161,10 +198,10 @@
+ 		"else " \
+ 			"setenv get_cmd tftp; " \
+ 		"fi; " \
+-		"${get_cmd} ${image}; " \
++		"${get_cmd} ${bootfile}; " \
+ 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+-				"bootz ${loadaddr} - ${fdt_addr}; " \
++			"if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \
++				"bootz ${loadaddr} - ${fdtaddr}; " \
+ 			"else " \
+ 				"if test ${boot_fdt} = try; then " \
+ 					"bootz; " \
+@@ -177,16 +214,7 @@
+ 		"fi;\0"
+ 
+ #define CONFIG_BOOTCOMMAND \
+-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+-		   "if run loadbootscript; then " \
+-			   "run bootscript; " \
+-		   "else " \
+-			   "if run loadimage; then " \
+-				   "run mmcboot; " \
+-			   "else run netboot; " \
+-			   "fi; " \
+-		   "fi; " \
+-	   "else run netboot; fi"
++	"run mmcboot;"
+ 
+ /* Miscellaneous configurable options */
+ #define CONFIG_SYS_LONGHELP
+@@ -228,6 +256,7 @@
+ 
+ #define CONFIG_OF_LIBFDT
+ #define CONFIG_CMD_BOOTZ
++#define CONFIG_SUPPORT_RAW_INITRD
+ 
+ #ifndef CONFIG_SYS_DCACHE_OFF
+ #define CONFIG_CMD_CACHE
+-- 
+2.2.1
+
diff --git a/libre/uboot-udoo/0002-kernel-add-support-for-gcc-5.patch b/libre/uboot-udoo/0002-kernel-add-support-for-gcc-5.patch
new file mode 100644
index 000000000..30718c561
--- /dev/null
+++ b/libre/uboot-udoo/0002-kernel-add-support-for-gcc-5.patch
@@ -0,0 +1,97 @@
+From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sasha.levin@oracle.com>
+Date: Mon, 13 Oct 2014 15:51:05 -0700
+Subject: [PATCH 2/6] kernel: add support for gcc 5
+
+We're missing include/linux/compiler-gcc5.h which is required now
+because gcc branched off to v5 in trunk.
+
+Just copy the relevant bits out of include/linux/compiler-gcc4.h,
+no new code is added as of now.
+
+This fixes a build error when using gcc 5.
+
+Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+ include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 66 insertions(+)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..cdd1cc2
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,66 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ * Fixed in GCC 4.8.2 and later versions.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+-- 
+2.4.4
+
diff --git a/libre/uboot-udoo/PKGBUILD b/libre/uboot-udoo/PKGBUILD
new file mode 100644
index 000000000..d09909e5e
--- /dev/null
+++ b/libre/uboot-udoo/PKGBUILD
@@ -0,0 +1,65 @@
+# U-Boot: UDOO
+# Maintainer: André Silva <emulatorman@parabola.nu>
+
+buildarch=4
+
+pkgbase=uboot-udoo
+pkgname=('uboot-udoo_dl' 'uboot-udoo_quad')
+pkgver=2015.01
+pkgrel=1
+arch=('armv7h')
+url="http://git.denx.de/u-boot.git/"
+license=('GPL')
+makedepends=('bc')
+depends=('linux-libre')
+source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
+        '0001-parabola-arm-modifications.patch'
+        '0002-kernel-add-support-for-gcc-5.patch')
+md5sums=('7f08dc9e98a71652bd6968888ed6ec95'
+         'f5e3488e5f2e0646f7e2965c8d5c52d5'
+         '721a46867e189d8dedc6b6f86a536a34')
+
+prepare() {
+  cd u-boot-${pkgver}
+
+  patch -Np1 -i ../0001-parabola-arm-modifications.patch
+  patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch
+}
+
+build() {
+  cd u-boot-${pkgver}
+  
+  unset CFLAGS CXXFLAGS LDFLAGS
+  
+  mkdir bins
+  for i in dl quad; do
+    make distclean
+    make udoo_${i}_config
+    make
+    mv u-boot.imx bins/u-boot-${i}.imx
+  done
+}
+
+package_uboot-udoo_dl() {
+  pkgdesc="U-Boot for UDOO Dual"
+  replaces=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec'
+            'uboot-udoo-dual')
+  conflicts=('uboot-udoo' 'uboot4extlinux-udoo' 'uboot4grub-udoo')
+  provides=('uboot-udoo')
+  install=${pkgbase}.install
+
+  mkdir -p "${pkgdir}"/boot
+  cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}"/boot/u-boot.imx
+}
+
+package_uboot-udoo_quad() {
+  pkgdesc="U-Boot for UDOO Quad"
+  replaces=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec'
+            'uboot-udoo-quad')
+  conflicts=('uboot-udoo' 'uboot4extlinux-udoo' 'uboot4grub-udoo')
+  provides=('uboot-udoo')
+  install=${pkgbase}.install
+
+  mkdir -p "${pkgdir}"/boot
+  cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}"/boot/u-boot.imx
+}
diff --git a/libre/uboot-udoo/uboot-udoo.install b/libre/uboot-udoo/uboot-udoo.install
new file mode 100644
index 000000000..c74dc9766
--- /dev/null
+++ b/libre/uboot-udoo/uboot-udoo.install
@@ -0,0 +1,23 @@
+flash_uboot() {
+  echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
+  echo "Do you want to do this now? [y|N]"
+  read -r shouldwe
+  if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
+    dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
+    sync
+  else
+    echo "You can do this later by running:"
+    echo "# dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
+  fi
+}
+
+## arg 1:  the new package version
+post_install() {
+  flash_uboot
+}
+
+## arg 1:  the new package version
+## arg 2:  the old package version
+post_upgrade() {
+  flash_uboot
+}