uboot-am335x_bone-2015.04-6: use patch based on Arch ARM to add Extlinux support

5 files changed, 0 insertions, 380 deletions

diff --git a/libre-testing/uboot-am335x_bone/0001-parabola-arm-modifications.patch b/libre-testing/uboot-am335x_bone/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 0f1c145da..000000000
--- a/libre-testing/uboot-am335x_bone/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig
---- u-boot-2015.04.orig/configs/am335x_evm_defconfig	2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/configs/am335x_evm_defconfig	2016-02-24 12:05:57.627551576 -0300
-@@ -1,7 +1,6 @@
- CONFIG_SPL=y
- CONFIG_SPL_STACK_R=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
--CONFIG_SYS_EXTRA_OPTIONS="NAND"
--CONFIG_CONS_INDEX=1
-+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
- CONFIG_ARM=y
- CONFIG_TARGET_AM335X_EVM=y
-diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h
---- u-boot-2015.04.orig/include/configs/am335x_evm.h	2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/include/configs/am335x_evm.h	2016-02-24 12:09:41.983016704 -0300
-@@ -17,6 +17,7 @@
- #define __CONFIG_AM335X_EVM_H
- 
- #include <configs/ti_am335x_common.h>
-+#define CONFIG_ENV_IS_NOWHERE
- 
- #ifndef CONFIG_SPL_BUILD
- #ifndef CONFIG_FIT
-@@ -45,6 +46,9 @@
- /* Enhance our eMMC support / experience. */
- #define CONFIG_CMD_GPT
- #define CONFIG_EFI_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_SETEXPR
- 
- #ifdef CONFIG_NAND
- #define NANDARGS \
-@@ -67,113 +71,90 @@
- 
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- 
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+	BOOTENV \
- 	DEFAULT_LINUX_BOOT_ENV \
--	"boot_fdt=try\0" \
--	"bootpart=0:2\0" \
-+	"bootpart=0:1\0" \
- 	"bootdir=/boot\0" \
-+	"fdtdir=/boot/dtbs\0" \
- 	"bootfile=zImage\0" \
- 	"fdtfile=undefined\0" \
-+	"rdfile=initramfs-linux.img\0" \
- 	"console=ttyO0,115200n8\0" \
- 	"partitions=" \
- 		"uuid_disk=${uuid_gpt_disk};" \
- 		"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- 	"optargs=\0" \
--	"mmcdev=0\0" \
--	"mmcroot=/dev/mmcblk0p2 ro\0" \
--	"mmcrootfstype=ext4 rootwait\0" \
--	"rootpath=/export/rootfs\0" \
--	"nfsopts=nolock\0" \
--	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
--		"::off\0" \
--	"ramroot=/dev/ram0 rw\0" \
--	"ramrootfstype=ext2\0" \
-+	"cape_disable=\0" \
-+	"cape_enable=\0" \
-+	"cmdline=\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
- 		"${optargs} " \
--		"root=${mmcroot} " \
--		"rootfstype=${mmcrootfstype}\0" \
--	"spiroot=/dev/mtdblock4 rw\0" \
--	"spirootfstype=jffs2\0" \
--	"spisrcaddr=0xe0000\0" \
--	"spiimgsize=0x362000\0" \
--	"spibusno=0\0" \
--	"spiargs=setenv bootargs console=${console} " \
--		"${optargs} " \
--		"root=${spiroot} " \
--		"rootfstype=${spirootfstype}\0" \
--	"netargs=setenv bootargs console=${console} " \
--		"${optargs} " \
--		"root=/dev/nfs " \
--		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
--		"ip=dhcp\0" \
--	"bootenv=uEnv.txt\0" \
--	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
--	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
--		"source ${loadaddr}\0" \
--	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
--	"importbootenv=echo Importing environment from mmc ...; " \
--		"env import -t -r $loadaddr $filesize\0" \
--	"ramargs=setenv bootargs console=${console} " \
--		"${optargs} " \
--		"root=${ramroot} " \
--		"rootfstype=${ramrootfstype}\0" \
--	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
--	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
--	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
--	"mmcloados=run mmcargs; " \
--		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if run loadfdt; then " \
--				"bootz ${loadaddr} - ${fdtaddr}; " \
--			"else " \
--				"if test ${boot_fdt} = try; then " \
--					"bootz; " \
--				"else " \
--					"echo WARN: Cannot load the DT; " \
--				"fi; " \
--			"fi; " \
--		"else " \
--			"bootz; " \
--		"fi;\0" \
--	"mmcboot=mmc dev ${mmcdev}; " \
--		"if mmc rescan; then " \
--			"echo SD/MMC found on device ${mmcdev};" \
--			"if run loadbootscript; then " \
--				"run bootscript;" \
--			"else " \
--				"if run loadbootenv; then " \
--					"echo Loaded environment from ${bootenv};" \
--					"run importbootenv;" \
-+		"${cape_disable} " \
-+		"${cape_enable} " \
-+		"root=${root} " \
-+		"${cmdline}\0" \
-+	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+	"mmcboot=usb start;" \
-+		"for devtype in mmc usb; do " \
-+			"for devnum in 0 1; do " \
-+				"if ${devtype} dev ${devnum}; then " \
-+					"echo ${devtype} found on device ${devnum};" \
-+					"setenv bootpart ${devnum}:1;" \
-+					"part uuid ${devtype} ${bootpart} uuid;" \
-+					"setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
-+					"echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+					"gpio set 54;" \
-+					"if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+						"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+						"env import -t ${loadaddr} ${filesize};" \
-+						"echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+						"if test -n ${cape}; then " \
-+							"if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
-+								"setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+							"fi; " \
-+							"echo using: $fdtfile...; " \
-+						"fi; " \
-+						"echo Checking if uenvcmd is set ...;" \
-+						"if test -n ${uenvcmd}; then " \
-+							"echo Running uenvcmd ...;" \
-+							"run uenvcmd;" \
-+						"fi;" \
-+					"fi;" \
-+					"gpio set 55;" \
-+					"run scan_dev_for_boot;" \
-+					"if run loadimage; then " \
-+						"run mmcargs;" \
-+						"if run loadfdt; then " \
-+							"gpio set 56;" \
-+							"if run loadrd; then " \
-+								"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+							"else " \
-+								"bootz ${loadaddr} - ${fdtaddr};" \
-+							"fi;" \
-+						"fi;" \
-+					"else " \
-+						"echo No kernel found;" \
-+					"fi;" \
-+					"gpio clear 54; gpio clear 55;" \
-+					"setexpr devnum ${devnum} + 1;" \
- 				"fi;" \
--				"if test -n $uenvcmd; then " \
--					"echo Running uenvcmd ...;" \
--					"run uenvcmd;" \
--				"fi;" \
--				"if run loadimage; then " \
--					"run mmcloados;" \
--				"fi;" \
--			"fi ;" \
--		"fi;\0" \
--	"spiboot=echo Booting from spi ...; " \
--		"run spiargs; " \
--		"sf probe ${spibusno}:0; " \
--		"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
--		"bootz ${loadaddr}\0" \
--	"netboot=echo Booting from network ...; " \
--		"setenv autoload no; " \
--		"dhcp; " \
--		"tftp ${loadaddr} ${bootfile}; " \
--		"tftp ${fdtaddr} ${fdtfile}; " \
--		"run netargs; " \
--		"bootz ${loadaddr} - ${fdtaddr}\0" \
--	"ramboot=echo Booting from ramdisk ...; " \
--		"run ramargs; " \
--		"bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+			"done;" \
-+		"done;\0" \
- 	"findfdt="\
- 		"if test $board_name = A335BONE; then " \
--			"setenv fdtfile am335x-bone.dtb; fi; " \
-+			"setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
- 		"if test $board_name = A335BNLT; then " \
--			"setenv fdtfile am335x-boneblack.dtb; fi; " \
-+			"setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \
- 		"if test $board_name = A33515BB; then " \
- 			"setenv fdtfile am335x-evm.dtb; fi; " \
- 		"if test $board_name = A335X_SK; then " \
-@@ -185,12 +166,11 @@
- #endif
- 
- #define CONFIG_BOOTCOMMAND \
--	"run findfdt; " \
--	"run mmcboot;" \
--	"setenv mmcdev 1; " \
--	"setenv bootpart 1:2; " \
-+	"gpio set 53;" \
-+	"run findfdt;" \
- 	"run mmcboot;" \
--	"run nandboot;"
-+	"gpio clear 54; gpio clear 55;" \
-+	"gpio set 56"
- 
- /* NS16550 Configuration */
- #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
-@@ -329,9 +309,8 @@
- #endif
- 
- #ifdef CONFIG_MUSB_GADGET
--#define CONFIG_USB_ETHER
--#define CONFIG_USB_ETH_RNDIS
--#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:af:00:00"
-+#define CONFIG_CMD_USB_MASS_STORAGE
-+#define CONFIG_USB_GADGET_MASS_STORAGE
- 
- /* USB TI's IDs */
- #define CONFIG_G_DNL_VENDOR_NUM 0x0451
diff --git a/libre-testing/uboot-am335x_bone/PKGBUILD b/libre-testing/uboot-am335x_bone/PKGBUILD
deleted file mode 100644
index 2870d2e82..000000000
--- a/libre-testing/uboot-am335x_bone/PKGBUILD
+++ /dev/null
@@ -1,53 +0,0 @@
-# U-Boot: BeagleBone and BeagleBone Black
-# Maintainer: André Silva <emulatorman@parabola.nu>
-# Contributor: Jookia <166291@gmail.com>
-# Contributor: Márcio Silva <coadde@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot-am335x_bone
-pkgver=2015.04
-pkgrel=5.1
-pkgdesc="U-Boot for BeagleBone and BeagleBone Black"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-replaces=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts'
-          'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck'
-          'uboot-beaglebone')
-conflicts=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts'
-           'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck'
-           'uboot-beaglebone' 'uboot4grub-am335x_bone')
-makedepends=('bc')
-license=('GPL')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
-        '0001-parabola-arm-modifications.patch'
-        'extlinux.conf'
-        'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
-         '37784c8f8f52a615d65e775018d237fb'
-         '068f6b4e8047115e73f29af5f384889b'
-         'ccb79775b81654e16fca18825c7f2506')
-
-prepare() {
-  cd u-boot-${pkgver}
-  patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
-  cd u-boot-${pkgver}
-
-  unset CFLAGS CXXFLAGS LDFLAGS
-
-  make distclean
-  make am335x_evm_config
-  make
-}
-
-package() {
-  cd u-boot-${pkgver}
-  mkdir -p "${pkgdir}"/boot/extlinux
-  cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
-  cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot-am335x_bone/extlinux.conf b/libre-testing/uboot-am335x_bone/extlinux.conf
deleted file mode 100644
index 52de94d49..000000000
--- a/libre-testing/uboot-am335x_bone/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
-	kernel /boot/vmlinuz-linux-libre
-	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-	fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-#	kernel /boot/vmlinuz-linux-libre-lts
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-#	kernel /boot/vmlinuz-linux-libre-knock
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-#	kernel /boot/vmlinuz-linux-libre-lts-knock
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-#	kernel /boot/vmlinuz-linux-libre-grsec
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-#	kernel /boot/vmlinuz-linux-libre-grsec-knock
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-#	kernel /boot/vmlinuz-linux-libre-audit
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-#	kernel /boot/vmlinuz-linux-libre-pck
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-#	kernel /boot/vmlinuz-linux-libre-rt
-#	append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-#	fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre-testing/uboot-am335x_bone/uEnv.txt b/libre-testing/uboot-am335x_bone/uEnv.txt
deleted file mode 100644
index f432efc6b..000000000
--- a/libre-testing/uboot-am335x_bone/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=coherent_pool=1M
diff --git a/libre-testing/uboot-am335x_bone/uboot-am335x_bone.install b/libre-testing/uboot-am335x_bone/uboot-am335x_bone.install
deleted file mode 100644
index 6428bd269..000000000
--- a/libre-testing/uboot-am335x_bone/uboot-am335x_bone.install
+++ /dev/null
@@ -1,37 +0,0 @@
-flash_instructions() {
-  echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
-  echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-}
-
-extlinux_warning() {
-  echo ">>> WARNING: for new entries, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
-  root=$(mount | awk '/ on \/ / { print $1; }')
-  if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
-    root=${root:0:12}
-    echo "A new U-Boot version needs to be flashed onto $root."
-    echo "Do this now? [y|N]"
-    read -r shouldwe
-    if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
-      dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
-      dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
-    else
-      echo "You can do this later by running:"
-      flash_instructions
-    fi
-  else
-    echo "Flash the new U-Boot version onto your boot device. For example:"
-    flash_instructions
-  fi
-  extlinux_warning
-}
-
-post_install() {
-  flash_uboot
-}
-
-post_upgrade() {
-  flash_uboot
-}