summaryrefslogtreecommitdiff
path: root/libre-testing
diff options
context:
space:
mode:
authorDenis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>2021-12-12 22:45:00 +0100
committerDenis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>2021-12-12 22:45:32 +0100
commit49fef4a963e1b2163a000a6b65e2f4d61bd171ae (patch)
tree89dcc01ec578373123b9ab188e9a3342df2a0772 /libre-testing
parenta95b393e7d22b42eb2d82b550f9995975ab33299 (diff)
downloadabslibre-49fef4a963e1b2163a000a6b65e2f4d61bd171ae.tar.gz
abslibre-49fef4a963e1b2163a000a6b65e2f4d61bd171ae.tar.bz2
abslibre-49fef4a963e1b2163a000a6b65e2f4d61bd171ae.zip
libre-testing: remove outdated u-boot packages
All these u-boot pakcages were consolidated in SOC specific packages instead of board specific pakcages in libre. In addition the libre packages are more recent and in sync with the Parabola armv7h installation manual. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Diffstat (limited to 'libre-testing')
-rw-r--r--libre-testing/uboot-am335x_green/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch668
-rw-r--r--libre-testing/uboot-am335x_green/0002-Forward-port-parabola-patch.patch113
-rw-r--r--libre-testing/uboot-am335x_green/0003-Beaglebone-green.patch26
-rw-r--r--libre-testing/uboot-am335x_green/PKGBUILD54
-rw-r--r--libre-testing/uboot-am335x_green/boot.cmd7
-rw-r--r--libre-testing/uboot-am335x_green/uEnv.txt1
-rw-r--r--libre-testing/uboot-am335x_green/uboot-am335x_green.install32
-rw-r--r--libre-testing/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch243
-rw-r--r--libre-testing/uboot4extlinux-am335x_bone/0002-kernel-add-support-for-gcc-7.patch68
-rw-r--r--libre-testing/uboot4extlinux-am335x_bone/PKGBUILD49
-rw-r--r--libre-testing/uboot4extlinux-am335x_bone/extlinux.conf43
-rw-r--r--libre-testing/uboot4extlinux-am335x_bone/uEnv.txt1
-rw-r--r--libre-testing/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install37
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/0001-kernel-add-support-for-gcc-7.patch68
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch76
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch31
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch109
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/0005-chiliboard-support.patch1685
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch423
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/PKGBUILD60
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/extlinux.conf43
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/uEnv.txt1
-rw-r--r--libre-testing/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install37
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/0001-parabola-arm-modifications.patch287
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/0002-kernel-add-support-for-gcc-7.patch68
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/0003-ARM-asm-io.h-use-static-inline.patch76
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/0004-common-main.c-make-show_boot_progress-__weak.patch31
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/0005-common-board-use-__weak.patch84
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/0006-common-board_f-cosmetic-use-__weak-for-leds.patch109
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/PKGBUILD62
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/extlinux.conf43
-rw-r--r--libre-testing/uboot4extlinux-nitrogen6q/uboot4extlinux-nitrogen6q.install11
-rw-r--r--libre-testing/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch312
-rw-r--r--libre-testing/uboot4extlinux-omap3_beagle/0002-kernel-add-support-for-gcc-7.patch68
-rw-r--r--libre-testing/uboot4extlinux-omap3_beagle/PKGBUILD48
-rw-r--r--libre-testing/uboot4extlinux-omap3_beagle/extlinux.conf43
-rw-r--r--libre-testing/uboot4extlinux-omap3_beagle/uEnv.txt0
-rw-r--r--libre-testing/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install11
-rw-r--r--libre-testing/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch62
-rw-r--r--libre-testing/uboot4extlinux-omap4_panda/PKGBUILD47
-rw-r--r--libre-testing/uboot4extlinux-omap4_panda/extlinux.conf43
-rw-r--r--libre-testing/uboot4extlinux-omap4_panda/uEnv.txt2
-rw-r--r--libre-testing/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install26
-rw-r--r--libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch164
-rw-r--r--libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-7.patch68
-rw-r--r--libre-testing/uboot4extlinux-udoo/PKGBUILD49
-rw-r--r--libre-testing/uboot4extlinux-udoo/extlinux.conf43
-rw-r--r--libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install27
-rw-r--r--libre-testing/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch153
-rw-r--r--libre-testing/uboot4extlinux-wandboard/0002-kernel-add-support-for-gcc-7.patch68
-rw-r--r--libre-testing/uboot4extlinux-wandboard/PKGBUILD46
-rw-r--r--libre-testing/uboot4extlinux-wandboard/extlinux.conf43
-rw-r--r--libre-testing/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install26
-rw-r--r--libre-testing/uboot4grub-am335x_bone/0001-parabola-arm-modifications+grub-support.patch240
-rw-r--r--libre-testing/uboot4grub-am335x_bone/PKGBUILD45
-rw-r--r--libre-testing/uboot4grub-am335x_bone/uEnv.txt1
-rw-r--r--libre-testing/uboot4grub-am335x_bone/uboot4grub-am335x_bone.install36
-rw-r--r--libre-testing/uboot4grub-omap3_beagle/0001-parabola-arm-modifications+grub-support.patch298
-rw-r--r--libre-testing/uboot4grub-omap3_beagle/PKGBUILD53
-rw-r--r--libre-testing/uboot4grub-omap3_beagle/uEnv.txt0
-rw-r--r--libre-testing/uboot4grub-udoo/0001-parabola-arm-modifications+grub-support.patch370
-rw-r--r--libre-testing/uboot4grub-udoo/0002-kernel-add-support-for-gcc-5.patch97
-rw-r--r--libre-testing/uboot4grub-udoo/PKGBUILD79
-rw-r--r--libre-testing/uboot4grub-udoo/uboot4grub-udoo.install27
64 files changed, 0 insertions, 7241 deletions
diff --git a/libre-testing/uboot-am335x_green/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch b/libre-testing/uboot-am335x_green/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch
deleted file mode 100644
index 05eb48490..000000000
--- a/libre-testing/uboot-am335x_green/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch
+++ /dev/null
@@ -1,668 +0,0 @@
-From 1457e5e6623dd33c4d20341afc270f7ae75847ea Mon Sep 17 00:00:00 2001
-From: Robert Nelson <robertcnelson@gmail.com>
-Date: Tue, 14 Mar 2017 09:35:43 -0500
-Subject: [PATCH 1/3] am335x_evm: uEnv.txt, bootz, n fixes
-
-Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
----
- board/ti/am335x/board.c | 43 +++++-
- board/ti/am335x/board.h | 20 +++
- board/ti/am335x/mux.c | 9 +-
- configs/am335x_boneblack_defconfig | 3 +-
- configs/am335x_evm_defconfig | 27 ++--
- include/configs/am335x_evm.h | 59 ++++++--
- include/configs/ti_armv7_common.h | 276 +++++++++++++++++++++++++++++++++++--
- 7 files changed, 397 insertions(+), 40 deletions(-)
-
-diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
-index 8eaf3e9a5c..cde6c3ba32 100644
---- a/board/ti/am335x/board.c
-+++ b/board/ti/am335x/board.c
-@@ -556,6 +556,24 @@ static struct clk_synth cdce913_data = {
- */
- int board_init(void)
- {
-+ u32 sys_reboot;
-+
-+ sys_reboot = readl(PRM_RSTST);
-+ if (sys_reboot & (1 << 9))
-+ puts("Reset Source: IcePick reset has occurred.\n");
-+
-+ if (sys_reboot & (1 << 5))
-+ puts("Reset Source: Global external warm reset has occurred.\n");
-+
-+ if (sys_reboot & (1 << 4))
-+ puts("Reset Source: watchdog reset has occurred.\n");
-+
-+ if (sys_reboot & (1 << 1))
-+ puts("Reset Source: Global warm SW reset has occurred.\n");
-+
-+ if (sys_reboot & (1 << 0))
-+ puts("Reset Source: Power-on reset has occurred.\n");
-+
- #if defined(CONFIG_HW_WATCHDOG)
- hw_watchdog_init();
- #endif
-@@ -651,8 +669,26 @@ int board_late_init(void)
- #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- char *name = NULL;
-
-+ if (board_is_bone_lt()) {
-+ puts("Board: BeagleBone Black\n");
-+ name = "A335BNLT";
-+ if (!strncmp(board_ti_get_rev(), "BW", 2)) {
-+ puts("Model: BeagleBone Black Wireless\n");
-+ name = "BBBW";
-+ }
-+ if (!strncmp(board_ti_get_rev(), "BLA", 3)) {
-+ puts("Model: BeagleBone Blue\n");
-+ name = "BBBL";
-+ }
-+ if (!strncmp(board_ti_get_rev(), "SE", 2)) {
-+ puts("Model: SanCloud BeagleBone Enhanced\n");
-+ name = "SBBE";
-+ }
-+ }
-+
- if (board_is_bbg1())
- name = "BBG1";
-+
- set_board_info_env(name);
-
- /*
-@@ -788,18 +824,21 @@ int board_eth_init(bd_t *bis)
- (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
-
- #ifdef CONFIG_DRIVER_TI_CPSW
-- if (board_is_bone() || board_is_bone_lt() ||
-+ if (board_is_bone() || (board_is_bone_lt() && !board_is_bone_lt_enhanced() && !board_is_m10a()) ||
- board_is_idk()) {
-+ puts("eth0: MII MODE\n");
- writel(MII_MODE_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_MII;
- } else if (board_is_icev2()) {
-+ puts("eth0: icev2: RGMII MODE\n");
- writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
- cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
- cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII;
- cpsw_slaves[0].phy_addr = 1;
- cpsw_slaves[1].phy_addr = 3;
- } else {
-+ puts("eth0: RGMII MODE\n");
- writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel);
- cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
- PHY_INTERFACE_MODE_RGMII;
-@@ -824,7 +863,7 @@ int board_eth_init(bd_t *bis)
- #define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
- #define AR8051_RGMII_TX_CLK_DLY 0x100
-
-- if (board_is_evm_sk() || board_is_gp_evm()) {
-+ if (board_is_evm_sk() || board_is_gp_evm() || board_is_bone_lt_enhanced() || board_is_m10a()) {
- const char *devname;
- devname = miiphy_get_current_dev();
-
-diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h
-index 48c139a817..fdf8c56258 100644
---- a/board/ti/am335x/board.h
-+++ b/board/ti/am335x/board.h
-@@ -34,11 +34,31 @@ static inline int board_is_bone_lt(void)
- return board_ti_is("A335BNLT");
- }
-
-+static inline int board_is_bbbw(void)
-+{
-+ return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BW", 2);
-+}
-+
-+static inline int board_is_blue(void)
-+{
-+ return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BLA", 3);
-+}
-+
- static inline int board_is_bbg1(void)
- {
- return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "BBG1", 4);
- }
-
-+static inline int board_is_bone_lt_enhanced(void)
-+{
-+ return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "SE", 2);
-+}
-+
-+static inline int board_is_m10a(void)
-+{
-+ return board_is_bone_lt() && !strncmp(board_ti_get_rev(), "M10A", 4);
-+}
-+
- static inline int board_is_evm_sk(void)
- {
- return board_ti_is("A335X_SK");
-diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
-index ad85b3a19a..6d65e99a1a 100644
---- a/board/ti/am335x/mux.c
-+++ b/board/ti/am335x/mux.c
-@@ -381,7 +381,14 @@ void enable_board_pin_mux(void)
- configure_module_pin_mux(mmc0_pin_mux_sk_evm);
- } else if (board_is_bone_lt()) {
- /* Beaglebone LT pinmux */
-- configure_module_pin_mux(mii1_pin_mux);
-+ if(board_is_bone_lt_enhanced() || board_is_m10a()) {
-+ /* SanCloud Beaglebone LT Enhanced pinmux */
-+ configure_module_pin_mux(rgmii1_pin_mux);
-+ }
-+ else {
-+ /* Beaglebone LT pinmux */
-+ configure_module_pin_mux(mii1_pin_mux);
-+ }
- configure_module_pin_mux(mmc0_pin_mux);
- #if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
- configure_module_pin_mux(nand_pin_mux);
-diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig
-index d0e1bcc8a3..ca1c746054 100644
---- a/configs/am335x_boneblack_defconfig
-+++ b/configs/am335x_boneblack_defconfig
-@@ -5,7 +5,6 @@ CONFIG_TARGET_AM335X_EVM=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
- CONFIG_DISTRO_DEFAULTS=y
- CONFIG_FIT=y
--CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
- CONFIG_SYS_CONSOLE_INFO_QUIET=y
- CONFIG_VERSION_VARIABLE=y
- CONFIG_ARCH_MISC_INIT=y
-@@ -47,3 +46,5 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
- CONFIG_G_DNL_VENDOR_NUM=0x0451
- CONFIG_G_DNL_PRODUCT_NUM=0xd022
- CONFIG_OF_LIBFDT=y
-+CONFIG_OF_LIBFDT_OVERLAY=y
-+CONFIG_PHY_MSCC=y
-diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
-index ab7b9aa6aa..6fcfa5216f 100644
---- a/configs/am335x_evm_defconfig
-+++ b/configs/am335x_evm_defconfig
-@@ -1,20 +1,21 @@
- CONFIG_ARM=y
- CONFIG_AM33XX=y
-+# CONFIG_SPL_NAND_SUPPORT is not set
- CONFIG_TARGET_AM335X_EVM=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
--CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
- CONFIG_DISTRO_DEFAULTS=y
- CONFIG_FIT=y
--CONFIG_SPL_LOAD_FIT=y
--CONFIG_SYS_EXTRA_OPTIONS="NAND"
- CONFIG_SYS_CONSOLE_INFO_QUIET=y
- CONFIG_VERSION_VARIABLE=y
- CONFIG_ARCH_MISC_INIT=y
- CONFIG_SPL=y
- CONFIG_SPL_STACK_R=y
--CONFIG_SPL_MTD_SUPPORT=y
- CONFIG_SPL_MUSB_NEW_SUPPORT=y
- CONFIG_SPL_OS_BOOT=y
-+CONFIG_AUTOBOOT_KEYED=y
-+CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
-+CONFIG_AUTOBOOT_DELAY_STR="d"
-+CONFIG_AUTOBOOT_STOP_STR=" "
- # CONFIG_CMD_IMLS is not set
- CONFIG_CMD_ASKENV=y
- # CONFIG_CMD_FLASH is not set
-@@ -24,37 +25,27 @@ CONFIG_CMD_SF=y
- CONFIG_CMD_SPI=y
- CONFIG_CMD_I2C=y
- CONFIG_CMD_USB=y
-+CONFIG_CMD_USB_MASS_STORAGE=y
- CONFIG_CMD_DFU=y
- CONFIG_CMD_GPIO=y
- # CONFIG_CMD_SETEXPR is not set
- CONFIG_CMD_EXT4_WRITE=y
--CONFIG_OF_CONTROL=y
--CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"
- # CONFIG_BLK is not set
- CONFIG_DFU_MMC=y
--CONFIG_DFU_NAND=y
- CONFIG_DFU_RAM=y
--CONFIG_DM_I2C=y
--CONFIG_MISC=y
--CONFIG_DM_MMC=y
--# CONFIG_DM_MMC_OPS is not set
- CONFIG_MMC_OMAP_HS=y
- CONFIG_SPI_FLASH=y
- CONFIG_SPI_FLASH_WINBOND=y
--CONFIG_DM_ETH=y
- CONFIG_SYS_NS16550=y
--CONFIG_TIMER=y
--CONFIG_OMAP_TIMER=y
- CONFIG_USB=y
--CONFIG_DM_USB=y
- CONFIG_USB_MUSB_HOST=y
- CONFIG_USB_MUSB_GADGET=y
--CONFIG_USB_MUSB_TI=y
- CONFIG_USB_STORAGE=y
- CONFIG_USB_GADGET=y
- CONFIG_USB_GADGET_DOWNLOAD=y
- CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
- CONFIG_G_DNL_VENDOR_NUM=0x0451
- CONFIG_G_DNL_PRODUCT_NUM=0xd022
--CONFIG_RSA=y
--CONFIG_SPL_OF_LIBFDT=y
-+CONFIG_OF_LIBFDT=y
-+CONFIG_OF_LIBFDT_OVERLAY=y
-+CONFIG_PHY_MSCC=y
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 27126871f7..399b25f47a 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -18,6 +18,7 @@
-
- #include <configs/ti_am335x_common.h>
- #include <environment/ti/dfu.h>
-+#define CONFIG_ENV_IS_NOWHERE
-
- #ifndef CONFIG_SPL_BUILD
- # define CONFIG_TIMESTAMP
-@@ -61,9 +62,14 @@
-
- #define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
- "bootcmd_" #devtypel #instance "=" \
-+ "gpio clear 56; " \
-+ "gpio clear 55; " \
-+ "gpio clear 54; " \
-+ "gpio set 53; " \
-+ "setenv devtype mmc; " \
- "setenv mmcdev " #instance"; "\
-- "setenv bootpart " #instance":2 ; "\
-- "run mmcboot\0"
-+ "setenv bootpart " #instance":1 ; "\
-+ "run boot\0"
-
- #define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
- #devtypel #instance " "
-@@ -80,7 +86,6 @@
- func(LEGACY_MMC, legacy_mmc, 0) \
- func(MMC, mmc, 1) \
- func(LEGACY_MMC, legacy_mmc, 1) \
-- func(NAND, nand, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-
-@@ -134,12 +139,41 @@
- "run ramargs; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
- "findfdt="\
-+ "echo board_name=[$board_name] ...; " \
- "if test $board_name = A335BONE; then " \
-- "setenv fdtfile am335x-bone.dtb; fi; " \
-+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
- "if test $board_name = A335BNLT; then " \
-- "setenv fdtfile am335x-boneblack.dtb; fi; " \
-+ "echo board_rev=[$board_rev] ...; " \
-+ "if test $board_rev = GH01; then " \
-+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; " \
-+ "elif test $board_rev = BBG1; then " \
-+ "setenv fdtfile am335x-bonegreen.dtb; setenv fdtbase am335x-bonegreen; " \
-+ "elif test $board_rev = BP00; then " \
-+ "setenv fdtfile am335x-pocketbone.dtb; setenv fdtbase am335x-pocketbone; " \
-+ "elif test $board_rev = GW1A; then " \
-+ "setenv fdtfile am335x-bonegreen-wireless.dtb; setenv fdtbase am335x-bonegreen-wireless; " \
-+ "elif test $board_rev = AIA0; then " \
-+ "setenv fdtfile am335x-abbbi.dtb; setenv fdtbase am335x-abbbi; " \
-+ "elif test $board_rev = EIA0; then " \
-+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; " \
-+ "elif test $board_rev = SE0A; then " \
-+ "setenv fdtfile am335x-sancloud-bbe.dtb; setenv fdtbase am335x-sancloud-bbe; " \
-+ "elif test $board_rev = ME06; then " \
-+ "setenv fdtfile am335x-bonegreen.dtb; setenv fdtbase am335x-bonegreen; " \
-+ "elif test $board_rev = M10A; then " \
-+ "setenv fdtfile am335x-vsc8531bbb.dtb; setenv fdtbase am335x-vsc8531bbb; " \
-+ "else " \
-+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; " \
-+ "fi; " \
-+ "fi; " \
- "if test $board_name = BBG1; then " \
-- "setenv fdtfile am335x-bonegreen.dtb; fi; " \
-+ "setenv fdtfile am335x-bonegreen.dtb; setenv fdtbase am335x-bonegreen; fi; " \
-+ "if test $board_name = BBBW; then " \
-+ "setenv fdtfile am335x-boneblack-wireless.dtb; setenv fdtbase am335x-boneblack-wireless; fi; " \
-+ "if test $board_name = BBBL; then " \
-+ "setenv fdtfile am335x-boneblue.dtb; setenv fdtbase am335x-boneblue; fi; " \
-+ "if test $board_name = SBBE; then " \
-+ "setenv fdtfile am335x-sancloud-bbe.dtb; setenv fdtbase am335x-sancloud-bbe; fi; " \
- "if test $board_name = A33515BB; then " \
- "setenv fdtfile am335x-evm.dtb; fi; " \
- "if test $board_name = A335X_SK; then " \
-@@ -147,13 +181,20 @@
- "if test $board_name = A335_ICE; then " \
- "setenv fdtfile am335x-icev2.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-+ "setenv board_name A335BNLT; " \
-+ "setenv board_rev EMMC; " \
-+ "setenv fdtbase am335x-boneblack-emmc-overlay; " \
-+ "setenv fdtfile am335x-boneblack-emmc-overlay.dtb; " \
-+ "fi; \0" \
- "init_console=" \
- "if test $board_name = A335_ICE; then "\
- "setenv console ttyO3,115200n8;" \
- "else " \
- "setenv console ttyO0,115200n8;" \
- "fi;\0" \
-+ EEWIKI_NFS \
-+ EEWIKI_BOOT \
-+ EEWIKI_UNAME_BOOT \
- NANDARGS \
- NETARGS \
- DFUARGS \
-@@ -273,9 +314,7 @@
- #endif
-
- #ifdef CONFIG_USB_MUSB_GADGET
--#define CONFIG_USB_ETHER
--#define CONFIG_USB_ETH_RNDIS
--#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-+#define CONFIG_USB_FUNCTION_MASS_STORAGE
- #endif /* CONFIG_USB_MUSB_GADGET */
-
- /*
-diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
-index a4ec4ce00a..bb3676b57f 100644
---- a/include/configs/ti_armv7_common.h
-+++ b/include/configs/ti_armv7_common.h
-@@ -54,20 +54,60 @@
- #define DEFAULT_MMC_TI_ARGS \
- "mmcdev=0\0" \
- "mmcrootfstype=ext4 rootwait\0" \
-- "finduuid=part uuid mmc ${bootpart} uuid\0" \
-+ "finduuid=part uuid ${devtype} ${bootpart} uuid\0" \
- "args_mmc=run finduuid;setenv bootargs console=${console} " \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "${cape_uboot} " \
-+ "root=PARTUUID=${uuid} ro " \
-+ "rootfstype=${mmcrootfstype} " \
-+ "${cmdline}\0" \
-+ "args_mmc_old=setenv bootargs console=${console} " \
- "${optargs} " \
-- "root=PARTUUID=${uuid} rw " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "${cape_uboot} " \
-+ "root=${oldroot} ro " \
-+ "rootfstype=${mmcrootfstype} " \
-+ "${cmdline}\0" \
-+ "args_mmc_uuid=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "${cape_uboot} " \
-+ "root=UUID=${uuid} ro " \
-+ "rootfstype=${mmcrootfstype} " \
-+ "${cmdline}\0" \
-+ "args_uenv_root=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "${cape_uboot} " \
-+ "root=${uenv_root} ro " \
-+ "rootfstype=${mmcrootfstype} " \
-+ "${cmdline}\0" \
-+ "args_netinstall=setenv bootargs ${netinstall_bootargs} " \
-+ "${optargs} " \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "${cape_uboot} " \
-+ "root=/dev/ram rw " \
-+ "${cmdline}\0" \
-+ "script=boot.scr\0" \
-+ "scriptfile=${script}\0" \
-+ "loadbootscript=load ${devtype} ${bootpart} ${loadaddr} ${scriptfile};\0" \
-+ "bootscript=echo Running bootscript from mmc${bootpart} ...; " \
- "source ${loadaddr}\0" \
- "bootenvfile=uEnv.txt\0" \
-- "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-+ "bootenv=uEnv.txt\0" \
-+ "importbootenv=echo Importing environment from ${devtype} ...; " \
- "env import -t ${loadaddr} ${filesize}\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \
-+ "loadbootenv=load ${devtype} ${bootpart} ${loadaddr} ${bootenvfile}\0" \
- "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "failumsboot=echo; echo FAILSAFE: U-Boot UMS (USB Mass Storage) enabled, media now available over the usb slave port ...; " \
-+ "ums 0 ${devtype} 1;\0" \
- "envboot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
-@@ -120,6 +160,226 @@
- "args_fit=setenv bootargs console=${console} \0" \
- "loadfit=run args_fit; bootm ${loadaddr}#${fdtfile};\0" \
-
-+#define EEWIKI_NFS \
-+ "server_ip=192.168.1.100\0" \
-+ "gw_ip=192.168.1.1\0" \
-+ "netmask=255.255.255.0\0" \
-+ "hostname=\0" \
-+ "device=eth0\0" \
-+ "autoconf=off\0" \
-+ "root_dir=/home/userid/targetNFS\0" \
-+ "tftp_dir=\0" \
-+ "nfs_options=,vers=3\0" \
-+ "nfsrootfstype=ext4 rootwait fixrtc\0" \
-+ "nfsargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "${cape_uboot} " \
-+ "root=/dev/nfs rw " \
-+ "rootfstype=${nfsrootfstype} " \
-+ "nfsroot=${nfsroot} " \
-+ "ip=${ip} " \
-+ "${cmdline}\0" \
-+ "nfsboot=echo Booting from ${server_ip} ...; " \
-+ "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
-+ "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}:${device}:${autoconf}; " \
-+ "setenv autoload no; " \
-+ "setenv serverip ${server_ip}; " \
-+ "setenv ipaddr ${client_ip}; " \
-+ "tftp ${loadaddr} ${tftp_dir}${bootfile}; " \
-+ "tftp ${fdtaddr} ${tftp_dir}dtbs/${fdtfile}; " \
-+ "run nfsargs; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0" \
-+ "nfsboot_uname_r=echo Booting from ${server_ip} ...; " \
-+ "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \
-+ "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}:${device}:${autoconf}; " \
-+ "setenv autoload no; " \
-+ "setenv serverip ${server_ip}; " \
-+ "setenv ipaddr ${client_ip}; " \
-+ "tftp ${loadaddr} ${tftp_dir}vmlinuz-${uname_r}; " \
-+ "tftp ${fdtaddr} ${tftp_dir}dtbs/${uname_r}/${fdtfile}; " \
-+ "run nfsargs; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0" \
-+
-+#define EEWIKI_BOOT \
-+ "boot=${devtype} dev ${mmcdev}; " \
-+ "if ${devtype} rescan; then " \
-+ "gpio set 54;" \
-+ "setenv bootpart ${mmcdev}:1; " \
-+ "if test -e ${devtype} ${bootpart} /etc/fstab; then " \
-+ "setenv mmcpart 1;" \
-+ "fi; " \
-+ "echo Checking for: /uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} /uEnv.txt; then " \
-+ "if run loadbootenv; then " \
-+ "gpio set 55;" \
-+ "echo Loaded environment from /uEnv.txt;" \
-+ "run importbootenv;" \
-+ "fi;" \
-+ "if test -n ${cape}; then " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
-+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+ "fi; " \
-+ "echo using: $fdtfile...; " \
-+ "fi; " \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "gpio set 56; " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "echo Checking if client_ip is set ...;" \
-+ "if test -n ${client_ip}; then " \
-+ "if test -n ${dtb}; then " \
-+ "setenv fdtfile ${dtb};" \
-+ "echo using ${fdtfile} ...;" \
-+ "fi;" \
-+ "gpio set 56; " \
-+ "if test -n ${uname_r}; then " \
-+ "echo Running nfsboot_uname_r ...;" \
-+ "run nfsboot_uname_r;" \
-+ "fi;" \
-+ "echo Running nfsboot ...;" \
-+ "run nfsboot;" \
-+ "fi;" \
-+ "fi; " \
-+ "echo Checking for: /${script} ...;" \
-+ "if test -e ${devtype} ${bootpart} /${script}; then " \
-+ "gpio set 55;" \
-+ "setenv scriptfile ${script};" \
-+ "run loadbootscript;" \
-+ "echo Loaded script from ${scriptfile};" \
-+ "gpio set 56; " \
-+ "run bootscript;" \
-+ "fi; " \
-+ "echo Checking for: /boot/${script} ...;" \
-+ "if test -e ${devtype} ${bootpart} /boot/${script}; then " \
-+ "gpio set 55;" \
-+ "setenv scriptfile /boot/${script};" \
-+ "run loadbootscript;" \
-+ "echo Loaded script from ${scriptfile};" \
-+ "gpio set 56; " \
-+ "run bootscript;" \
-+ "fi; " \
-+ "echo Checking for: /boot/uEnv.txt ...;" \
-+ "for i in 1 2 3 4 5 6 7 ; do " \
-+ "setenv mmcpart ${i};" \
-+ "setenv bootpart ${mmcdev}:${mmcpart};" \
-+ "if test -e ${devtype} ${bootpart} /boot/uEnv.txt; then " \
-+ "gpio set 55;" \
-+ "load ${devtype} ${bootpart} ${loadaddr} /boot/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from /boot/uEnv.txt;" \
-+ "if test -n ${cape}; then " \
-+ "echo debug: [cape=${cape}] ... ;" \
-+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+ "echo Using: dtb=${fdtfile} ...;" \
-+ "fi; " \
-+ "if test -n ${dtb}; then " \
-+ "echo debug: [dtb=${dtb}] ... ;" \
-+ "setenv fdtfile ${dtb};" \
-+ "echo Using: dtb=${fdtfile} ...;" \
-+ "fi;" \
-+ "echo Checking if uname_r is set in /boot/uEnv.txt...;" \
-+ "if test -n ${uname_r}; then " \
-+ "gpio set 56; " \
-+ "setenv oldroot /dev/mmcblk${mmcdev}p${mmcpart};" \
-+ "echo Running uname_boot ...;" \
-+ "run uname_boot;" \
-+ "fi;" \
-+ "fi;" \
-+ "done;" \
-+ "fi;\0" \
-+
-+#define EEWIKI_UNAME_BOOT \
-+ "uname_boot="\
-+ "setenv bootdir /boot; " \
-+ "setenv bootfile vmlinuz-${uname_r}; " \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/${bootfile}; then " \
-+ "echo loading ${bootdir}/${bootfile} ...; "\
-+ "run loadimage;" \
-+ "setenv fdtdir /boot/dtbs/${uname_r}; " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "setenv fdtdir /usr/lib/linux-image-${uname_r}; " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "setenv fdtdir /boot/dtb-${uname_r}; " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "setenv fdtdir /boot/dtbs; " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "setenv fdtdir /boot/dtb; " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "setenv fdtdir /boot; " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "if test -e ${devtype} ${bootpart} ${fdtfile}; then " \
-+ "run loadfdt;" \
-+ "else " \
-+ "echo; echo unable to find [dtb=${fdtfile}] did you name it correctly? ...; " \
-+ "run failumsboot;" \
-+ "fi;" \
-+ "fi;" \
-+ "fi;" \
-+ "fi;" \
-+ "fi;" \
-+ "fi;" \
-+ "fi;" \
-+ "fi; " \
-+ "setenv rdfile initrd.img-${uname_r}; " \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/${rdfile}; then " \
-+ "echo loading ${bootdir}/${rdfile} ...; "\
-+ "run loadrd;" \
-+ "if test -n ${netinstall_enable}; then " \
-+ "run args_netinstall; run message;" \
-+ "echo debug: [${bootargs}] ... ;" \
-+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
-+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
-+ "fi;" \
-+ "if test -n ${uenv_root}; then " \
-+ "run args_uenv_root;" \
-+ "echo debug: [${bootargs}] ... ;" \
-+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
-+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
-+ "fi;" \
-+ "if test -n ${uuid}; then " \
-+ "run args_mmc_uuid;" \
-+ "echo debug: [${bootargs}] ... ;" \
-+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
-+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
-+ "fi;" \
-+ "run args_mmc_old;" \
-+ "echo debug: [${bootargs}] ... ;" \
-+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \
-+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \
-+ "else " \
-+ "if test -n ${uenv_root}; then " \
-+ "run args_uenv_root;" \
-+ "echo debug: [${bootargs}] ... ;" \
-+ "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \
-+ "bootz ${loadaddr} - ${fdtaddr}; " \
-+ "fi;" \
-+ "run args_mmc_old;" \
-+ "echo debug: [${bootargs}] ... ;" \
-+ "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \
-+ "bootz ${loadaddr} - ${fdtaddr}; " \
-+ "fi;" \
-+ "fi;\0" \
-+
- /*
- * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
- * we say (for simplicity) that we have 1 bank, always, even when
---
-2.12.1
-
diff --git a/libre-testing/uboot-am335x_green/0002-Forward-port-parabola-patch.patch b/libre-testing/uboot-am335x_green/0002-Forward-port-parabola-patch.patch
deleted file mode 100644
index 79da7fc91..000000000
--- a/libre-testing/uboot-am335x_green/0002-Forward-port-parabola-patch.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From ab424dd74098de8e8704c238d305f0983016c8cf Mon Sep 17 00:00:00 2001
-From: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
-Date: Wed, 22 Mar 2017 11:48:58 +0100
-Subject: [PATCH 2/3] Forward-port parabola patch
-
-Like in the original patch:
-- The default boot partition is changed
-- The kernel image name has been changed to comply with parabola naming
-- An initrd path has been added
-- A base directory where to find the dtb has been added.
- Here's are the sed scripts that I ran to help do that:
- sed 's#setenv fdtbase #setenv fdtbase ${fdtdir}/#g' -i include/configs/am335x_evm.h
- sed 's#setenv fdtfile #setenv fdtfile ${fdtdir}/#g' -i include/configs/am335x_evm.h
-
-Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
----
- include/configs/am335x_evm.h | 47 +++++++++++++++++++++++---------------------
- 1 file changed, 25 insertions(+), 22 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 399b25f47a..1a7d3e88a3 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -105,10 +105,13 @@
- DEFAULT_LINUX_BOOT_ENV \
- DEFAULT_MMC_TI_ARGS \
- DEFAULT_FIT_TI_ARGS \
-- "bootpart=0:2\0" \
-+ "bootpart=0:1\0" \
- "bootdir=/boot\0" \
-- "bootfile=zImage\0" \
-+ "bootfile=vmlinuz-linux-libre\0" \
-+ "ramdiskfile=initramfs-linux-libre.img\0" \
- "fdtfile=undefined\0" \
-+ "fdtdir=/boot/dtbs/linux-libre\0" \
-+ "rdfile=initramfs-linux-libre.img\0" \
- "console=ttyO0,115200n8\0" \
- "partitions=" \
- "uuid_disk=${uuid_gpt_disk};" \
-@@ -141,50 +144,50 @@
- "findfdt="\
- "echo board_name=[$board_name] ...; " \
- "if test $board_name = A335BONE; then " \
-- "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-bone.dtb; setenv fdtbase ${fdtdir}/am335x-bone; fi; " \
- "if test $board_name = A335BNLT; then " \
- "echo board_rev=[$board_rev] ...; " \
- "if test $board_rev = GH01; then " \
-- "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; " \
-+ "setenv fdtfile ${fdtdir}/am335x-boneblack.dtb; setenv fdtbase ${fdtdir}/am335x-boneblack; " \
- "elif test $board_rev = BBG1; then " \
-- "setenv fdtfile am335x-bonegreen.dtb; setenv fdtbase am335x-bonegreen; " \
-+ "setenv fdtfile ${fdtdir}/am335x-bonegreen.dtb; setenv fdtbase ${fdtdir}/am335x-bonegreen; " \
- "elif test $board_rev = BP00; then " \
-- "setenv fdtfile am335x-pocketbone.dtb; setenv fdtbase am335x-pocketbone; " \
-+ "setenv fdtfile ${fdtdir}/am335x-pocketbone.dtb; setenv fdtbase ${fdtdir}/am335x-pocketbone; " \
- "elif test $board_rev = GW1A; then " \
-- "setenv fdtfile am335x-bonegreen-wireless.dtb; setenv fdtbase am335x-bonegreen-wireless; " \
-+ "setenv fdtfile ${fdtdir}/am335x-bonegreen-wireless.dtb; setenv fdtbase ${fdtdir}/am335x-bonegreen-wireless; " \
- "elif test $board_rev = AIA0; then " \
-- "setenv fdtfile am335x-abbbi.dtb; setenv fdtbase am335x-abbbi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-abbbi.dtb; setenv fdtbase ${fdtdir}/am335x-abbbi; " \
- "elif test $board_rev = EIA0; then " \
-- "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; " \
-+ "setenv fdtfile ${fdtdir}/am335x-boneblack.dtb; setenv fdtbase ${fdtdir}/am335x-boneblack; " \
- "elif test $board_rev = SE0A; then " \
-- "setenv fdtfile am335x-sancloud-bbe.dtb; setenv fdtbase am335x-sancloud-bbe; " \
-+ "setenv fdtfile ${fdtdir}/am335x-sancloud-bbe.dtb; setenv fdtbase ${fdtdir}/am335x-sancloud-bbe; " \
- "elif test $board_rev = ME06; then " \
-- "setenv fdtfile am335x-bonegreen.dtb; setenv fdtbase am335x-bonegreen; " \
-+ "setenv fdtfile ${fdtdir}/am335x-bonegreen.dtb; setenv fdtbase ${fdtdir}/am335x-bonegreen; " \
- "elif test $board_rev = M10A; then " \
-- "setenv fdtfile am335x-vsc8531bbb.dtb; setenv fdtbase am335x-vsc8531bbb; " \
-+ "setenv fdtfile ${fdtdir}/am335x-vsc8531bbb.dtb; setenv fdtbase ${fdtdir}/am335x-vsc8531bbb; " \
- "else " \
-- "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; " \
-+ "setenv fdtfile ${fdtdir}/am335x-boneblack.dtb; setenv fdtbase ${fdtdir}/am335x-boneblack; " \
- "fi; " \
- "fi; " \
- "if test $board_name = BBG1; then " \
-- "setenv fdtfile am335x-bonegreen.dtb; setenv fdtbase am335x-bonegreen; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-bonegreen.dtb; setenv fdtbase ${fdtdir}/am335x-bonegreen; fi; " \
- "if test $board_name = BBBW; then " \
-- "setenv fdtfile am335x-boneblack-wireless.dtb; setenv fdtbase am335x-boneblack-wireless; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-boneblack-wireless.dtb; setenv fdtbase ${fdtdir}/am335x-boneblack-wireless; fi; " \
- "if test $board_name = BBBL; then " \
-- "setenv fdtfile am335x-boneblue.dtb; setenv fdtbase am335x-boneblue; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-boneblue.dtb; setenv fdtbase ${fdtdir}/am335x-boneblue; fi; " \
- "if test $board_name = SBBE; then " \
-- "setenv fdtfile am335x-sancloud-bbe.dtb; setenv fdtbase am335x-sancloud-bbe; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-sancloud-bbe.dtb; setenv fdtbase ${fdtdir}/am335x-sancloud-bbe; fi; " \
- "if test $board_name = A33515BB; then " \
-- "setenv fdtfile am335x-evm.dtb; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-evm.dtb; fi; " \
- "if test $board_name = A335X_SK; then " \
-- "setenv fdtfile am335x-evmsk.dtb; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-evmsk.dtb; fi; " \
- "if test $board_name = A335_ICE; then " \
-- "setenv fdtfile am335x-icev2.dtb; fi; " \
-+ "setenv fdtfile ${fdtdir}/am335x-icev2.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
- "setenv board_name A335BNLT; " \
- "setenv board_rev EMMC; " \
-- "setenv fdtbase am335x-boneblack-emmc-overlay; " \
-- "setenv fdtfile am335x-boneblack-emmc-overlay.dtb; " \
-+ "setenv fdtbase ${fdtdir}/am335x-boneblack-emmc-overlay; " \
-+ "setenv fdtfile ${fdtdir}/am335x-boneblack-emmc-overlay.dtb; " \
- "fi; \0" \
- "init_console=" \
- "if test $board_name = A335_ICE; then "\
---
-2.12.1
-
diff --git a/libre-testing/uboot-am335x_green/0003-Beaglebone-green.patch b/libre-testing/uboot-am335x_green/0003-Beaglebone-green.patch
deleted file mode 100644
index 59986cf2f..000000000
--- a/libre-testing/uboot-am335x_green/0003-Beaglebone-green.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From c830e24b1f197e5888a6471dcadb211d0c30c164 Mon Sep 17 00:00:00 2001
-From: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
-Date: Wed, 22 Mar 2017 12:11:36 +0100
-Subject: [PATCH 3/3] Beaglebone green
-
-Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
----
- include/configs/am335x_evm.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index 1a7d3e88a3..a6a326d54c 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -105,7 +105,7 @@
- DEFAULT_LINUX_BOOT_ENV \
- DEFAULT_MMC_TI_ARGS \
- DEFAULT_FIT_TI_ARGS \
-- "bootpart=0:1\0" \
-+ "bootpart=1:1\0" \
- "bootdir=/boot\0" \
- "bootfile=vmlinuz-linux-libre\0" \
- "ramdiskfile=initramfs-linux-libre.img\0" \
---
-2.12.1
-
diff --git a/libre-testing/uboot-am335x_green/PKGBUILD b/libre-testing/uboot-am335x_green/PKGBUILD
deleted file mode 100644
index d6cf7003f..000000000
--- a/libre-testing/uboot-am335x_green/PKGBUILD
+++ /dev/null
@@ -1,54 +0,0 @@
-# U-Boot: BeagleBone Green
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info>
-
-pkgname=uboot-am335x_green
-_gitver='d5abcf94c7123167725fc22ace342f0d455093c1'
-pkgver=20170328.g${_gitver:0:10}
-pkgrel=1
-pkgdesc="U-Boot for BeagleBone Green (git version)"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-makedepends=('git' 'bc' 'uboot-tools')
-depends=('linux-libre')
-replaces=('uboot-beaglebone')
-conflicts=('uboot4extlinux-am335x_bone' 'uboot4grub-am335x_bone'
- 'grub-am335x_bone' 'uboot-am335x_bone')
-license=('GPL')
-install=${pkgname}.install
-source=("u-boot-${_gitver:0:10}::git+http://git.denx.de/u-boot.git"
- '0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch'
- '0002-Forward-port-parabola-patch.patch'
- '0003-Beaglebone-green.patch'
- 'uEnv.txt'
- 'boot.cmd')
-sha256sums=('SKIP'
- 'c02bdad650f62e5fc465a2113f9b8c19f55833afc99d14230952cce712496502'
- 'ca21d84c57f31878ee3288f52450dc09d5dc9de807de77d5bdf7d9b88d8dba59'
- '7a659bf26d6c126da41723b6005d95fe0bb1e989ee42134104fbb757bb108c90'
- '4ef3c3177e4476cdb1790dd021d2383ef9913c029d005ffbeb61b958e753672e'
- '34e920015ba60acebd443b5d4d9b060cc9ae8aa6ed5f405f86645b6cdec0dbc1')
-
-prepare() {
- cd u-boot-${_gitver:0:10}
- git reset --hard ${_gitver}
- patch -Np1 -i ../0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch
- patch -Np1 -i ../0002-Forward-port-parabola-patch.patch
- patch -Np1 -i ../0003-Beaglebone-green.patch
-}
-
-build() {
- cd u-boot-${_gitver:0:10}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- make distclean
- make am335x_evm_config
- make
- mkimage -A arm -O linux -T script -C none -d "${srcdir}"/boot.cmd boot.scr
-}
-
-package() {
- cd u-boot-${_gitver:0:10}
- mkdir -p "${pkgdir}"/boot
- cp MLO u-boot.img boot.scr "${srcdir}"/uEnv.txt "${pkgdir}"/boot
-}
diff --git a/libre-testing/uboot-am335x_green/boot.cmd b/libre-testing/uboot-am335x_green/boot.cmd
deleted file mode 100644
index 8f738e508..000000000
--- a/libre-testing/uboot-am335x_green/boot.cmd
+++ /dev/null
@@ -1,7 +0,0 @@
-setenv bootargs console=ttyO0,115200n8 root=/dev/mapper/internal-rootfs coherent_pool=1M
-echo "Booting /boot/boot.scr"
-ext4load mmc 1:1 $loadaddr /boot/vmlinuz-linux-libre
-ext4load mmc 1:1 $rdaddr /boot/initramfs-linux-libre.img
-set rdsize ${filesize}
-ext4load mmc 1:1 $fdtaddr /boot/dtbs/linux-libre/am335x-bonegreen.dtb
-bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}
diff --git a/libre-testing/uboot-am335x_green/uEnv.txt b/libre-testing/uboot-am335x_green/uEnv.txt
deleted file mode 100644
index f432efc6b..000000000
--- a/libre-testing/uboot-am335x_green/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=coherent_pool=1M
diff --git a/libre-testing/uboot-am335x_green/uboot-am335x_green.install b/libre-testing/uboot-am335x_green/uboot-am335x_green.install
deleted file mode 100644
index 24ccc1acb..000000000
--- a/libre-testing/uboot-am335x_green/uboot-am335x_green.install
+++ /dev/null
@@ -1,32 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre-testing/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 0f1c145da..000000000
--- a/libre-testing/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig
---- u-boot-2015.04.orig/configs/am335x_evm_defconfig 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/configs/am335x_evm_defconfig 2016-02-24 12:05:57.627551576 -0300
-@@ -1,7 +1,6 @@
- CONFIG_SPL=y
- CONFIG_SPL_STACK_R=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
--CONFIG_SYS_EXTRA_OPTIONS="NAND"
--CONFIG_CONS_INDEX=1
-+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
- CONFIG_ARM=y
- CONFIG_TARGET_AM335X_EVM=y
-diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h
---- u-boot-2015.04.orig/include/configs/am335x_evm.h 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/include/configs/am335x_evm.h 2016-02-24 12:09:41.983016704 -0300
-@@ -17,6 +17,7 @@
- #define __CONFIG_AM335X_EVM_H
-
- #include <configs/ti_am335x_common.h>
-+#define CONFIG_ENV_IS_NOWHERE
-
- #ifndef CONFIG_SPL_BUILD
- #ifndef CONFIG_FIT
-@@ -45,6 +46,9 @@
- /* Enhance our eMMC support / experience. */
- #define CONFIG_CMD_GPT
- #define CONFIG_EFI_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_SETEXPR
-
- #ifdef CONFIG_NAND
- #define NANDARGS \
-@@ -67,113 +71,90 @@
-
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- DEFAULT_LINUX_BOOT_ENV \
-- "boot_fdt=try\0" \
-- "bootpart=0:2\0" \
-+ "bootpart=0:1\0" \
- "bootdir=/boot\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "bootfile=zImage\0" \
- "fdtfile=undefined\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "console=ttyO0,115200n8\0" \
- "partitions=" \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- "optargs=\0" \
-- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 ro\0" \
-- "mmcrootfstype=ext4 rootwait\0" \
-- "rootpath=/export/rootfs\0" \
-- "nfsopts=nolock\0" \
-- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-- "::off\0" \
-- "ramroot=/dev/ram0 rw\0" \
-- "ramrootfstype=ext2\0" \
-+ "cape_disable=\0" \
-+ "cape_enable=\0" \
-+ "cmdline=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "spiroot=/dev/mtdblock4 rw\0" \
-- "spirootfstype=jffs2\0" \
-- "spisrcaddr=0xe0000\0" \
-- "spiimgsize=0x362000\0" \
-- "spibusno=0\0" \
-- "spiargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${spiroot} " \
-- "rootfstype=${spirootfstype}\0" \
-- "netargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=/dev/nfs " \
-- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-- "ip=dhcp\0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcloados=run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdtaddr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-- "mmcboot=mmc dev ${mmcdev}; " \
-- "if mmc rescan; then " \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootscript; then " \
-- "run bootscript;" \
-- "else " \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "root=${root} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "for devnum in 0 1; do " \
-+ "if ${devtype} dev ${devnum}; then " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "gpio set 54;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "if test -n ${cape}; then " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
-+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+ "fi; " \
-+ "echo using: $fdtfile...; " \
-+ "fi; " \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "gpio set 55;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "gpio set 56;" \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "gpio clear 54; gpio clear 55;" \
-+ "setexpr devnum ${devnum} + 1;" \
- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadimage; then " \
-- "run mmcloados;" \
-- "fi;" \
-- "fi ;" \
-- "fi;\0" \
-- "spiboot=echo Booting from spi ...; " \
-- "run spiargs; " \
-- "sf probe ${spibusno}:0; " \
-- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
-- "bootz ${loadaddr}\0" \
-- "netboot=echo Booting from network ...; " \
-- "setenv autoload no; " \
-- "dhcp; " \
-- "tftp ${loadaddr} ${bootfile}; " \
-- "tftp ${fdtaddr} ${fdtfile}; " \
-- "run netargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+ "done;" \
-+ "done;\0" \
- "findfdt="\
- "if test $board_name = A335BONE; then " \
-- "setenv fdtfile am335x-bone.dtb; fi; " \
-+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
- "if test $board_name = A335BNLT; then " \
-- "setenv fdtfile am335x-boneblack.dtb; fi; " \
-+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \
- "if test $board_name = A33515BB; then " \
- "setenv fdtfile am335x-evm.dtb; fi; " \
- "if test $board_name = A335X_SK; then " \
-@@ -185,12 +166,11 @@
- #endif
-
- #define CONFIG_BOOTCOMMAND \
-- "run findfdt; " \
-- "run mmcboot;" \
-- "setenv mmcdev 1; " \
-- "setenv bootpart 1:2; " \
-+ "gpio set 53;" \
-+ "run findfdt;" \
- "run mmcboot;" \
-- "run nandboot;"
-+ "gpio clear 54; gpio clear 55;" \
-+ "gpio set 56"
-
- /* NS16550 Configuration */
- #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-@@ -329,9 +309,8 @@
- #endif
-
- #ifdef CONFIG_MUSB_GADGET
--#define CONFIG_USB_ETHER
--#define CONFIG_USB_ETH_RNDIS
--#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-+#define CONFIG_CMD_USB_MASS_STORAGE
-+#define CONFIG_USB_GADGET_MASS_STORAGE
-
- /* USB TI's IDs */
- #define CONFIG_G_DNL_VENDOR_NUM 0x0451
diff --git a/libre-testing/uboot4extlinux-am335x_bone/0002-kernel-add-support-for-gcc-7.patch b/libre-testing/uboot4extlinux-am335x_bone/0002-kernel-add-support-for-gcc-7.patch
deleted file mode 100644
index ca59b159a..000000000
--- a/libre-testing/uboot4extlinux-am335x_bone/0002-kernel-add-support-for-gcc-7.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-diff --git a/include/linux/compiler-gcc7.h b/include/linux/compiler-gcc7.h
-new file mode 100644
-index 0000000..ba064fa
---- /dev/null
-+++ b/include/linux/compiler-gcc7.h
-@@ -0,0 +1,59 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc7.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#define KASAN_ABI_VERSION 4
---
-2.1.4
-
diff --git a/libre-testing/uboot4extlinux-am335x_bone/PKGBUILD b/libre-testing/uboot4extlinux-am335x_bone/PKGBUILD
deleted file mode 100644
index 1a98494ec..000000000
--- a/libre-testing/uboot4extlinux-am335x_bone/PKGBUILD
+++ /dev/null
@@ -1,49 +0,0 @@
-# U-Boot: BeagleBone and BeagleBone Black
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid.info>
-# Contributor: André Silva <emulatorman@hyperbola.info>
-# Contributor: Jookia <166291@gmail.com>
-# Contributor: Márcio Silva <coadde@hyperbola.info>
-
-pkgname=uboot4extlinux-am335x_bone
-pkgver=2015.04
-pkgrel=4.1
-pkgdesc="U-Boot with Extlinux support for BeagleBone and BeagleBone Black"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-conflicts=('uboot-am335x_bone' 'uboot4grub-am335x_bone')
-makedepends=('bc')
-license=('GPL')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- '0002-kernel-add-support-for-gcc-7.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-sha256sums=('0a1a70df586655f527befa6f12e184e96ed61b126e5a567382321b17200f5d60'
- 'ba5c395e5250fa13d608823e278936862d4fc472cfbf24dc94d9d90e5d9360b7'
- '9e80aa27cccdb07b03d56a970f247c91d586d0b936868c076c20acc2e68a3968'
- '5cdafa8abc97f1f7b9395b4f1d39494509d0f225f41bd8f030d6f31d549ba64f'
- '4ef3c3177e4476cdb1790dd021d2383ef9913c029d005ffbeb61b958e753672e')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-7.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
- make distclean
- make am335x_evm_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot4extlinux-am335x_bone/extlinux.conf b/libre-testing/uboot4extlinux-am335x_bone/extlinux.conf
deleted file mode 100644
index b29bec2d7..000000000
--- a/libre-testing/uboot4extlinux-am335x_bone/extlinux.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-timeout 50
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-label Parabola GNU/Linux-libre, linux-libre-lts kernel
- kernel /boot/vmlinuz-linux-libre-lts
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-lts
-
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
-label Parabola GNU/Linux-libre, linux-libre-pck kernel
- kernel /boot/vmlinuz-linux-libre-pck
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre-testing/uboot4extlinux-am335x_bone/uEnv.txt b/libre-testing/uboot4extlinux-am335x_bone/uEnv.txt
deleted file mode 100644
index f432efc6b..000000000
--- a/libre-testing/uboot4extlinux-am335x_bone/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=coherent_pool=1M
diff --git a/libre-testing/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install b/libre-testing/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install
deleted file mode 100644
index 93306e01e..000000000
--- a/libre-testing/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install
+++ /dev/null
@@ -1,37 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-}
-
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre-testing/uboot4extlinux-chiliboard/0001-kernel-add-support-for-gcc-7.patch b/libre-testing/uboot4extlinux-chiliboard/0001-kernel-add-support-for-gcc-7.patch
deleted file mode 100644
index ca59b159a..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/0001-kernel-add-support-for-gcc-7.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-diff --git a/include/linux/compiler-gcc7.h b/include/linux/compiler-gcc7.h
-new file mode 100644
-index 0000000..ba064fa
---- /dev/null
-+++ b/include/linux/compiler-gcc7.h
-@@ -0,0 +1,59 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc7.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#define KASAN_ABI_VERSION 4
---
-2.1.4
-
diff --git a/libre-testing/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch b/libre-testing/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
deleted file mode 100644
index 6ec3d82fc..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From a29b67a36a2b59acfc9cb7adc6e3bc06c490d4ee Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Sun, 22 Jun 2014 23:10:39 +0200
-Subject: [PATCH 2/6] ARM:asm:io.h use static inline
-
-When compiling u-boot with W=1 the extern inline void for
-read* is likely causing the most noise. gcc / clang will
-warn there is never a actual declaration for these functions.
-Instead of declaring these extern make them static inline so
-it is actually declared.
-
-cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
----
- arch/arm/include/asm/io.h | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
-index 214f3ea..dc6138a 100644
---- a/arch/arm/include/asm/io.h
-+++ b/arch/arm/include/asm/io.h
-@@ -77,7 +77,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
- #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
- #define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v))
-
--extern inline void __raw_writesb(unsigned long addr, const void *data,
-+static inline void __raw_writesb(unsigned long addr, const void *data,
- int bytelen)
- {
- uint8_t *buf = (uint8_t *)data;
-@@ -85,7 +85,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
- __arch_putb(*buf++, addr);
- }
-
--extern inline void __raw_writesw(unsigned long addr, const void *data,
-+static inline void __raw_writesw(unsigned long addr, const void *data,
- int wordlen)
- {
- uint16_t *buf = (uint16_t *)data;
-@@ -93,7 +93,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
- __arch_putw(*buf++, addr);
- }
-
--extern inline void __raw_writesl(unsigned long addr, const void *data,
-+static inline void __raw_writesl(unsigned long addr, const void *data,
- int longlen)
- {
- uint32_t *buf = (uint32_t *)data;
-@@ -101,21 +101,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
- __arch_putl(*buf++, addr);
- }
-
--extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
-+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
- {
- uint8_t *buf = (uint8_t *)data;
- while(bytelen--)
- *buf++ = __arch_getb(addr);
- }
-
--extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
-+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
- {
- uint16_t *buf = (uint16_t *)data;
- while(wordlen--)
- *buf++ = __arch_getw(addr);
- }
-
--extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
-+static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
- {
- uint32_t *buf = (uint32_t *)data;
- while(longlen--)
---
-2.5.0
-
diff --git a/libre-testing/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch b/libre-testing/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
deleted file mode 100644
index baf1efd5d..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From dc7efb77bbd59224855713a554bb3721568a85c6 Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Thu, 26 Jun 2014 20:18:31 +0200
-Subject: [PATCH 3/6] common: main.c: make show_boot_progress __weak
-
-This not only looks a bit better it also prevents a
-warning with W=1 (no previous prototype).
-
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
-Acked-by: Simon Glass <sjg@chromium.org>
----
- common/main.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/common/main.c b/common/main.c
-index 32618f1..2979fbe 100644
---- a/common/main.c
-+++ b/common/main.c
-@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
- /*
- * Board-specific Platform code can reimplement show_boot_progress () if needed
- */
--void inline __show_boot_progress (int val) {}
--void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
-+__weak void show_boot_progress(int val) {}
-
- static void modem_init(void)
- {
---
-2.5.0
-
diff --git a/libre-testing/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch b/libre-testing/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
deleted file mode 100644
index f2237a229..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From ea9b2d003712ae2c6158abb5c9f285f593e8fcb0 Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Mon, 23 Jun 2014 23:20:19 +0200
-Subject: [PATCH 4/6] common: board_f: cosmetic use __weak for leds
-
-First of all this looks a lot better, but it also
-prevents a gcc warning (W=1), that the weak function
-has no previous prototype.
-
-cc: Simon Glass <sjg@chromium.org>
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
-Acked-by: Simon Glass <sjg@chromium.org>
----
- common/board_f.c | 29 ++++++++++-------------------
- include/status_led.h | 22 +++++++++++-----------
- 2 files changed, 21 insertions(+), 30 deletions(-)
-
-diff --git a/common/board_f.c b/common/board_f.c
-index 4ea4cb2..bdab38e 100644
---- a/common/board_f.c
-+++ b/common/board_f.c
-@@ -37,6 +37,7 @@
- #include <os.h>
- #include <post.h>
- #include <spi.h>
-+#include <status_led.h>
- #include <trace.h>
- #include <watchdog.h>
- #include <asm/errno.h>
-@@ -78,25 +79,15 @@ DECLARE_GLOBAL_DATA_PTR;
- ************************************************************************
- * May be supplied by boards if desired
- */
--inline void __coloured_LED_init(void) {}
--void coloured_LED_init(void)
-- __attribute__((weak, alias("__coloured_LED_init")));
--inline void __red_led_on(void) {}
--void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
--inline void __red_led_off(void) {}
--void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
--inline void __green_led_on(void) {}
--void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
--inline void __green_led_off(void) {}
--void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
--inline void __yellow_led_on(void) {}
--void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
--inline void __yellow_led_off(void) {}
--void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
--inline void __blue_led_on(void) {}
--void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
--inline void __blue_led_off(void) {}
--void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
-+__weak void coloured_LED_init(void) {}
-+__weak void red_led_on(void) {}
-+__weak void red_led_off(void) {}
-+__weak void green_led_on(void) {}
-+__weak void green_led_off(void) {}
-+__weak void yellow_led_on(void) {}
-+__weak void yellow_led_off(void) {}
-+__weak void blue_led_on(void) {}
-+__weak void blue_led_off(void) {}
-
- /*
- * Why is gd allocated a register? Prior to reloc it might be better to
-diff --git a/include/status_led.h b/include/status_led.h
-index 0eb91b8..b8aaaf7 100644
---- a/include/status_led.h
-+++ b/include/status_led.h
-@@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state);
- # include <asm/status_led.h>
- #endif
-
-+#endif /* CONFIG_STATUS_LED */
-+
- /*
- * Coloured LEDs API
- */
- #ifndef __ASSEMBLY__
--extern void coloured_LED_init (void);
--extern void red_led_on(void);
--extern void red_led_off(void);
--extern void green_led_on(void);
--extern void green_led_off(void);
--extern void yellow_led_on(void);
--extern void yellow_led_off(void);
--extern void blue_led_on(void);
--extern void blue_led_off(void);
-+void coloured_LED_init(void);
-+void red_led_on(void);
-+void red_led_off(void);
-+void green_led_on(void);
-+void green_led_off(void);
-+void yellow_led_on(void);
-+void yellow_led_off(void);
-+void blue_led_on(void);
-+void blue_led_off(void);
- #else
- .extern LED_init
- .extern red_led_on
-@@ -297,6 +299,4 @@ extern void blue_led_off(void);
- .extern blue_led_off
- #endif
-
--#endif /* CONFIG_STATUS_LED */
--
- #endif /* _STATUS_LED_H_ */
---
-2.5.0
-
diff --git a/libre-testing/uboot4extlinux-chiliboard/0005-chiliboard-support.patch b/libre-testing/uboot4extlinux-chiliboard/0005-chiliboard-support.patch
deleted file mode 100644
index cbe029a69..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/0005-chiliboard-support.patch
+++ /dev/null
@@ -1,1685 +0,0 @@
-From 22efc5d711cf5a91a236b3a54f94cbcad0fc7b5e Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Sat, 29 Aug 2015 08:56:32 -0600
-Subject: [PATCH 5/6] chiliboard support
-
----
- board/grinn/chiliboard/Makefile | 13 +
- board/grinn/chiliboard/board.c | 447 +++++++++++++++++++
- board/grinn/chiliboard/board.h | 20 +
- board/grinn/chiliboard/mux.c | 99 +++++
- board/grinn/chiliboard/u-boot.lds | 131 ++++++
- boards.cfg | 5 +
- drivers/mtd/nand/omap_gpmc.c | 6 +-
- include/configs/chiliboard.h | 878 ++++++++++++++++++++++++++++++++++++++
- 8 files changed, 1597 insertions(+), 2 deletions(-)
- create mode 100644 board/grinn/chiliboard/Makefile
- create mode 100644 board/grinn/chiliboard/board.c
- create mode 100644 board/grinn/chiliboard/board.h
- create mode 100644 board/grinn/chiliboard/mux.c
- create mode 100644 board/grinn/chiliboard/u-boot.lds
- create mode 100644 include/configs/chiliboard.h
-
-diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile
-new file mode 100644
-index 0000000..804ac37
---- /dev/null
-+++ b/board/grinn/chiliboard/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# Makefile
-+#
-+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
-+obj-y := mux.o
-+endif
-+
-+obj-y += board.o
-diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c
-new file mode 100644
-index 0000000..ed8ab63
---- /dev/null
-+++ b/board/grinn/chiliboard/board.c
-@@ -0,0 +1,447 @@
-+/*
-+ * board.c
-+ *
-+ * Board functions for Grinn chiliboard, AM335X based boards
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <errno.h>
-+#include <spl.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/omap.h>
-+#include <asm/arch/ddr_defs.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/mmc_host_def.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/mem.h>
-+#include <asm/io.h>
-+#include <asm/emif.h>
-+#include <asm/gpio.h>
-+#include <i2c.h>
-+#include <miiphy.h>
-+#include <cpsw.h>
-+#include <power/tps65217.h>
-+#include <power/tps65910.h>
-+#include <environment.h>
-+#include <watchdog.h>
-+#include <environment.h>
-+#include "board.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+#define HDR_NAME_LEN 8
-+
-+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-+
-+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+static const struct ddr_data ddr2_chilisom_gcs1_data = {
-+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
-+ (MT47H128M16RT25E_RD_DQS<<20) |
-+ (MT47H128M16RT25E_RD_DQS<<10) |
-+ (MT47H128M16RT25E_RD_DQS<<0)),
-+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
-+ (MT47H128M16RT25E_WR_DQS<<20) |
-+ (MT47H128M16RT25E_WR_DQS<<10) |
-+ (MT47H128M16RT25E_WR_DQS<<0)),
-+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
-+ (MT47H128M16RT25E_PHY_WRLVL<<20) |
-+ (MT47H128M16RT25E_PHY_WRLVL<<10) |
-+ (MT47H128M16RT25E_PHY_WRLVL<<0)),
-+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
-+ (MT47H128M16RT25E_PHY_GATELVL<<20) |
-+ (MT47H128M16RT25E_PHY_GATELVL<<10) |
-+ (MT47H128M16RT25E_PHY_GATELVL<<0)),
-+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
-+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
-+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
-+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
-+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
-+ (MT47H128M16RT25E_PHY_WR_DATA<<20) |
-+ (MT47H128M16RT25E_PHY_WR_DATA<<10) |
-+ (MT47H128M16RT25E_PHY_WR_DATA<<0)),
-+};
-+
-+static const struct cmd_control ddr2_chilisom_gcs1_cmd_ctrl_data = {
-+ .cmd0csratio = MT47H128M16RT25E_RATIO,
-+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
-+
-+ .cmd1csratio = MT47H128M16RT25E_RATIO,
-+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
-+
-+ .cmd2csratio = MT47H128M16RT25E_RATIO,
-+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
-+};
-+
-+static const struct emif_regs ddr2_chilisom_gcs1_emif_reg_data = {
-+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
-+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
-+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
-+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
-+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
-+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
-+};
-+
-+static const struct ddr_data ddr3_chilisom_gcs2_data = {
-+ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
-+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
-+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
-+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
-+};
-+
-+static const struct cmd_control ddr3_chilisom_gcs2_cmd_ctrl_data = {
-+ .cmd0csratio = MT41K256M16HA125E_RATIO,
-+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-+
-+ .cmd1csratio = MT41K256M16HA125E_RATIO,
-+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-+
-+ .cmd2csratio = MT41K256M16HA125E_RATIO,
-+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-+};
-+
-+static struct emif_regs ddr3_chilisom_gcs2_emif_reg_data = {
-+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
-+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
-+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
-+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
-+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
-+ .zq_config = MT41K256M16HA125E_ZQ_CFG,
-+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
-+};
-+
-+#ifdef CONFIG_SPL_OS_BOOT
-+int spl_start_uboot(void)
-+{
-+ /* break into full u-boot on 'c' */
-+ if (serial_tstc() && serial_getc() == 'c')
-+ return 1;
-+
-+#ifdef CONFIG_SPL_ENV_SUPPORT
-+ env_init();
-+ env_relocate_spec();
-+ if (getenv_yesno("boot_os") != 1)
-+ return 1;
-+#endif
-+
-+ return 0;
-+}
-+#endif
-+
-+#define OSC (V_OSCK/1000000)
-+const struct dpll_params dpll_ddr_chilisom_gcs1 = {
-+ 266, OSC-1, 1, -1, -1, -1, -1};
-+const struct dpll_params dpll_ddr_chilisom_gcs2 = {
-+ 400, OSC-1, 1, -1, -1, -1, -1};
-+
-+void am33xx_spl_board_init(void)
-+{
-+ int mpu_vdd;
-+
-+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
-+
-+ int usb_cur_lim;
-+
-+ if (i2c_probe(TPS65217_CHIP_PM))
-+ return;
-+
-+ uchar pmic_status_reg;
-+ if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg))
-+ return;
-+ if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) {
-+ puts("No AC power, disabling frequency switch\n");
-+ return;
-+ }
-+
-+ /*
-+ * Increase USB current limit to 1300mA or 1800mA and set
-+ * the MPU voltage controller as needed.
-+ */
-+ if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
-+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
-+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
-+ } else {
-+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
-+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
-+ }
-+
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
-+ TPS65217_POWER_PATH,
-+ usb_cur_lim,
-+ TPS65217_USB_INPUT_CUR_LIMIT_MASK))
-+ puts("tps65217_reg_write failure\n");
-+
-+ /* Set DCDC3 (CORE) voltage to 1.125V */
-+ if (tps65217_voltage_update(TPS65217_DEFDCDC3,
-+ TPS65217_DCDC_VOLT_SEL_1125MV)) {
-+ puts("tps65217_voltage_update failure\n");
-+ return;
-+ }
-+
-+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
-+ if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
-+ puts("tps65217_voltage_update failure\n");
-+ return;
-+ }
-+
-+ /* Set LDO3, LDO4 output voltage to 3.3V for GCS1.
-+ * Set LDO3 to 1.8V and LDO4 to 3.3V for GCS2. */
-+
-+ #ifdef CONFIG_CHILISOM_GCS2
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS1,
-+ TPS65217_LDO_VOLTAGE_OUT_1_8,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS2,
-+ TPS65217_LDO_VOLTAGE_OUT_3_3,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ #else
-+
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS1,
-+ TPS65217_LDO_VOLTAGE_OUT_3_3,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS2,
-+ TPS65217_LDO_VOLTAGE_OUT_3_3,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ #endif
-+
-+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
-+}
-+
-+const struct dpll_params *get_dpll_ddr_params(void)
-+{
-+ enable_i2c0_pin_mux();
-+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
-+
-+#ifndef CONFIG_CHILISOM_GCS2
-+ return &dpll_ddr_chilisom_gcs1;
-+#else
-+ return &dpll_ddr_chilisom_gcs2;
-+#endif
-+}
-+
-+void set_uart_mux_conf(void)
-+{
-+#ifdef CONFIG_SERIAL1
-+ enable_uart0_pin_mux();
-+#endif /* CONFIG_SERIAL1 */
-+}
-+
-+void set_mux_conf_regs(void)
-+{
-+ enable_board_pin_mux();
-+}
-+
-+const struct ctrl_ioregs ioregs_chilisom_gcs1 = {
-+ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+};
-+
-+const struct ctrl_ioregs ioregs_chilisom_gcs2 = {
-+ .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+};
-+
-+void sdram_init(void)
-+{
-+#ifndef CONFIG_CHILISOM_GCS2
-+ config_ddr(266, &ioregs_chilisom_gcs1,
-+ &ddr2_chilisom_gcs1_data,
-+ &ddr2_chilisom_gcs1_cmd_ctrl_data,
-+ &ddr2_chilisom_gcs1_emif_reg_data, 0);
-+#else
-+ config_ddr(400, &ioregs_chilisom_gcs2,
-+ &ddr3_chilisom_gcs2_data,
-+ &ddr3_chilisom_gcs2_cmd_ctrl_data,
-+ &ddr3_chilisom_gcs2_emif_reg_data, 0);
-+#endif
-+}
-+#endif
-+
-+/*
-+ * Basic board specific setup. Pinmux has been handled already.
-+ */
-+int board_init(void)
-+{
-+#if defined(CONFIG_HW_WATCHDOG)
-+ hw_watchdog_init();
-+#endif
-+
-+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-+#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
-+ gpmc_init();
-+#endif
-+ return 0;
-+}
-+
-+#ifdef CONFIG_BOARD_LATE_INIT
-+int board_late_init(void)
-+{
-+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-+ char safe_string[HDR_NAME_LEN + 1];
-+
-+ /* Now set variables based on the header. */
-+ strncpy(safe_string, (char *)"CHILISOM", 8);
-+ safe_string[8] = 0;
-+ setenv("board_name", safe_string);
-+
-+#ifndef CONFIG_CHILISOM_GCS2
-+ strncpy(safe_string, (char *)"1.1", 3);
-+ safe_string[3] = 0;
-+ setenv("board_rev", safe_string);
-+#else
-+ strncpy(safe_string, (char *)"2.2", 3);
-+ safe_string[3] = 0;
-+ setenv("board_rev", safe_string);
-+#endif
-+#endif
-+ return 0;
-+}
-+#endif
-+
-+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
-+static void cpsw_control(int enabled)
-+{
-+ /* VTP can be added here */
-+
-+ return;
-+}
-+
-+static struct cpsw_slave_data cpsw_slaves[] = {
-+ {
-+ .slave_reg_ofs = 0x208,
-+ .sliver_reg_ofs = 0xd80,
-+ .phy_addr = 0,
-+ },
-+ {
-+ .slave_reg_ofs = 0x308,
-+ .sliver_reg_ofs = 0xdc0,
-+ .phy_addr = 1,
-+ },
-+};
-+
-+static struct cpsw_platform_data cpsw_data = {
-+ .mdio_base = CPSW_MDIO_BASE,
-+ .cpsw_base = CPSW_BASE,
-+ .mdio_div = 0xff,
-+ .channels = 8,
-+ .cpdma_reg_ofs = 0x800,
-+ .slaves = 1,
-+ .slave_data = cpsw_slaves,
-+ .ale_reg_ofs = 0xd00,
-+ .ale_entries = 1024,
-+ .host_port_reg_ofs = 0x108,
-+ .hw_stats_reg_ofs = 0x900,
-+ .bd_ram_ofs = 0x2000,
-+ .mac_control = (1 << 5),
-+ .control = cpsw_control,
-+ .host_port_num = 0,
-+ .version = CPSW_CTRL_VERSION_2,
-+};
-+#endif
-+
-+/*
-+ * This function will:
-+ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr
-+ * in the environment
-+ * Perform fixups to the PHY present on certain boards. We only need this
-+ * function in:
-+ * - SPL with either CPSW or USB ethernet support
-+ * - Full U-Boot, with either CPSW or USB ethernet
-+ * Build in only these cases to avoid warnings about unused variables
-+ * when we build an SPL that has neither option but full U-Boot will.
-+ */
-+
-+#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
-+ && defined(CONFIG_SPL_BUILD)) || \
-+ ((defined(CONFIG_DRIVER_TI_CPSW) || \
-+ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
-+ !defined(CONFIG_SPL_BUILD))
-+int board_eth_init(bd_t *bis)
-+{
-+ int rv, n = 0;
-+ uint8_t mac_addr[6];
-+ uint32_t mac_hi, mac_lo;
-+
-+ /* try reading mac address from efuse */
-+ mac_lo = readl(&cdev->macid0l);
-+ mac_hi = readl(&cdev->macid0h);
-+ mac_addr[0] = mac_hi & 0xFF;
-+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-+ mac_addr[4] = mac_lo & 0xFF;
-+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-+
-+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
-+ if (!getenv("ethaddr")) {
-+ printf("<ethaddr> not set. Validating first E-fuse MAC\n");
-+
-+ if (is_valid_ether_addr(mac_addr))
-+ eth_setenv_enetaddr("ethaddr", mac_addr);
-+ }
-+
-+#ifdef CONFIG_DRIVER_TI_CPSW
-+
-+ mac_lo = readl(&cdev->macid1l);
-+ mac_hi = readl(&cdev->macid1h);
-+ mac_addr[0] = mac_hi & 0xFF;
-+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-+ mac_addr[4] = mac_lo & 0xFF;
-+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-+
-+ if (!getenv("eth1addr")) {
-+ if (is_valid_ether_addr(mac_addr))
-+ eth_setenv_enetaddr("eth1addr", mac_addr);
-+ }
-+
-+ /* writel(MII_MODE_ENABLE, &cdev->miisel); */
-+ writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
-+
-+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII;
-+
-+ rv = cpsw_register(&cpsw_data);
-+ if (rv < 0)
-+ printf("Error %d registering CPSW switch\n", rv);
-+ else
-+ n += rv;
-+#endif
-+#endif
-+#if defined(CONFIG_USB_ETHER) && \
-+ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
-+ if (is_valid_ether_addr(mac_addr))
-+ eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
-+
-+ rv = usb_eth_initialize(bis);
-+ if (rv < 0)
-+ printf("Error %d registering USB_ETHER\n", rv);
-+ else
-+ n += rv;
-+#endif
-+ return n;
-+}
-+#endif
-diff --git a/board/grinn/chiliboard/board.h b/board/grinn/chiliboard/board.h
-new file mode 100644
-index 0000000..6753e74
---- /dev/null
-+++ b/board/grinn/chiliboard/board.h
-@@ -0,0 +1,20 @@
-+/*
-+ * board.h
-+ *
-+ * Grinn AM335x boards information header
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _BOARD_H_
-+#define _BOARD_H_
-+
-+void enable_uart0_pin_mux(void);
-+void enable_i2c0_pin_mux(void);
-+void enable_board_pin_mux(void);
-+#endif
-diff --git a/board/grinn/chiliboard/mux.c b/board/grinn/chiliboard/mux.c
-new file mode 100644
-index 0000000..644f211
---- /dev/null
-+++ b/board/grinn/chiliboard/mux.c
-@@ -0,0 +1,99 @@
-+/*
-+ * mux.c
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/mux.h>
-+#include <asm/io.h>
-+#include <i2c.h>
-+#include "board.h"
-+
-+static struct module_pin_mux uart0_pin_mux[] = {
-+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
-+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
-+ {-1},
-+};
-+
-+static struct module_pin_mux mmc0_pin_mux[] = {
-+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
-+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
-+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
-+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
-+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
-+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
-+ {-1},
-+};
-+
-+static struct module_pin_mux i2c0_pin_mux[] = {
-+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
-+ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
-+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
-+ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
-+ {-1},
-+};
-+
-+static struct module_pin_mux rmii1_pin_mux[] = {
-+ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */
-+ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */
-+ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */
-+ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */
-+ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */
-+ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */
-+ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */
-+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
-+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
-+ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */
-+ {-1},
-+};
-+
-+static struct module_pin_mux nand_pin_mux[] = {
-+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
-+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
-+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
-+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
-+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
-+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
-+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
-+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
-+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
-+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
-+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
-+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
-+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
-+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
-+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
-+ {-1},
-+};
-+
-+void enable_uart0_pin_mux(void)
-+{
-+ configure_module_pin_mux(uart0_pin_mux);
-+}
-+
-+void enable_i2c0_pin_mux(void)
-+{
-+ configure_module_pin_mux(i2c0_pin_mux);
-+}
-+
-+void enable_board_pin_mux(void)
-+{
-+ /* chiliboard pinmux */
-+ configure_module_pin_mux(rmii1_pin_mux);
-+ configure_module_pin_mux(nand_pin_mux);
-+ configure_module_pin_mux(mmc0_pin_mux);
-+
-+#ifndef CONFIG_CHILISOM_GCS2
-+ puts("Configuration for Chilisom GCS1\n");
-+#else
-+ puts("Configuration for Chilisom GCS2\n");
-+#endif
-+}
-diff --git a/board/grinn/chiliboard/u-boot.lds b/board/grinn/chiliboard/u-boot.lds
-new file mode 100644
-index 0000000..bf70d88
---- /dev/null
-+++ b/board/grinn/chiliboard/u-boot.lds
-@@ -0,0 +1,131 @@
-+/*
-+ * Copyright (c) 2004-2008 Texas Instruments
-+ *
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ *(.__image_copy_start)
-+ *(.vectors)
-+ CPUDIR/start.o (.text*)
-+ board/grinn/chiliboard/built-in.o (.text*)
-+ *(.text*)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-+
-+ . = ALIGN(4);
-+ .data : {
-+ *(.data*)
-+ }
-+
-+ . = ALIGN(4);
-+
-+ . = .;
-+
-+ . = ALIGN(4);
-+ .u_boot_list : {
-+ KEEP(*(SORT(.u_boot_list*)));
-+ }
-+
-+ . = ALIGN(4);
-+
-+ .image_copy_end :
-+ {
-+ *(.__image_copy_end)
-+ }
-+
-+ .rel_dyn_start :
-+ {
-+ *(.__rel_dyn_start)
-+ }
-+
-+ .rel.dyn : {
-+ *(.rel*)
-+ }
-+
-+ .rel_dyn_end :
-+ {
-+ *(.__rel_dyn_end)
-+ }
-+
-+ .hash : { *(.hash*) }
-+
-+ .end :
-+ {
-+ *(.__end)
-+ }
-+
-+ _image_binary_end = .;
-+
-+ /*
-+ * Deprecated: this MMU section is used by pxa at present but
-+ * should not be used by new boards/CPUs.
-+ */
-+ . = ALIGN(4096);
-+ .mmutable : {
-+ *(.mmutable)
-+ }
-+
-+/*
-+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
-+ * __bss_base and __bss_limit are for linker only (overlay ordering)
-+ */
-+
-+ .bss_start __rel_dyn_start (OVERLAY) : {
-+ KEEP(*(.__bss_start));
-+ __bss_base = .;
-+ }
-+
-+ .bss __bss_base (OVERLAY) : {
-+ *(.bss*)
-+ . = ALIGN(4);
-+ __bss_limit = .;
-+ }
-+
-+ .bss_end __bss_limit (OVERLAY) : {
-+ KEEP(*(.__bss_end));
-+ }
-+
-+ .dynsym _image_binary_end : { *(.dynsym) }
-+ .dynbss : { *(.dynbss) }
-+ .dynstr : { *(.dynstr*) }
-+ .dynamic : { *(.dynamic*) }
-+ .gnu.hash : { *(.gnu.hash) }
-+ .plt : { *(.plt*) }
-+ .interp : { *(.interp*) }
-+ .gnu : { *(.gnu*) }
-+ .ARM.exidx : { *(.ARM.exidx*) }
-+}
-diff --git a/boards.cfg b/boards.cfg
-index 1ba2081..b432704 100644
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -258,6 +258,11 @@ Active arm armv7 am33xx BuR tseries
- Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier <hannes.petermaier@br-automation.com>
- Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier <hannes.petermaier@br-automation.com>
- Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg <grinberg@compulab.co.il>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_ram128m chiliboard:CHILISOM_GCS2,NAND,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m_ram128m chiliboard:CHILISOM_GCS2,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_nand512m chiliboard:CHILISOM_GCS2,NAND,NAND512MB Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m chiliboard:CHILISOM_GCS2 Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard chiliboard:CHILISOM_GCS2,NAND Grzegorz Glomb <g.glomb@grinn-global.com>
- Active arm armv7 am33xx gumstix pepper pepper - Ash Charles <ash@gumstix.com>
- Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
- Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de>
-diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
-index 1acf06b..0c9cde3 100644
---- a/drivers/mtd/nand/omap_gpmc.c
-+++ b/drivers/mtd/nand/omap_gpmc.c
-@@ -478,11 +478,13 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
- oob += eccbytes) {
- chip->ecc.hwctl(mtd, NAND_ECC_READ);
- /* read data */
-- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page);
-+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1);
- chip->read_buf(mtd, p, eccsize);
-
- /* read respective ecc from oob area */
-- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page);
-+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
- chip->read_buf(mtd, oob, eccbytes);
- /* read syndrome */
- chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
-new file mode 100644
-index 0000000..eacc9af
---- /dev/null
-+++ b/include/configs/chiliboard.h
-@@ -0,0 +1,878 @@
-+/*
-+ * chiliboard.h
-+ *
-+ * Grinn chiliboard configuration header
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_CHILIBOARD_H
-+#define __CONFIG_CHILIBOARD_H
-+
-+#define CONFIG_AM33XX
-+#define CONFIG_ARCH_CPU_INIT
-+#define CONFIG_SYS_CACHELINE_SIZE 64
-+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
-+#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
-+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
-+
-+#include <asm/arch/omap.h>
-+
-+/* NS16550 Configuration */
-+#define CONFIG_SYS_NS16550
-+#define CONFIG_SYS_NS16550_SERIAL
-+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-+#define CONFIG_SYS_NS16550_CLK 48000000
-+
-+/* Network defines. */
-+#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_MII
-+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
-+#define CONFIG_BOOTP_DNS2
-+#define CONFIG_BOOTP_SEND_HOSTNAME
-+#define CONFIG_BOOTP_GATEWAY
-+#define CONFIG_BOOTP_SUBNETMASK
-+#define CONFIG_NET_RETRY_COUNT 10
-+#define CONFIG_CMD_PING
-+#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
-+#define CONFIG_MII /* Required in net/eth.c */
-+
-+/*
-+ * RTC related defines. To use bootcount you must set bootlimit in the
-+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
-+ * in the board config.
-+ */
-+#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
-+
-+/* Enable the HW watchdog, since we can use this with bootcount */
-+#define CONFIG_HW_WATCHDOG
-+#define CONFIG_OMAP_WATCHDOG
-+
-+/*
-+ * SPL related defines. The Public RAM memory map the ROM defines the
-+ * area between 0x402F0400 and 0x4030B800 as a download area and
-+ * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
-+ * supports X-MODEM loading via UART, and we leverage this and then use
-+ * Y-MODEM to load u-boot.img, when booted over UART.
-+ */
-+#define CONFIG_SPL_TEXT_BASE 0x402F0400
-+#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
-+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
-+ (128 << 20))
-+
-+/* Enable the watchdog inside of SPL */
-+#define CONFIG_SPL_WATCHDOG_SUPPORT
-+
-+/*
-+ * Since SPL did pll and ddr initialization for us,
-+ * we don't need to do it twice.
-+ */
-+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#endif
-+
-+/*
-+ * When building U-Boot such that there is no previous loader
-+ * we need to call board_early_init_f. This is taken care of in
-+ * s_init when we have SPL used.
-+ */
-+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
-+#define CONFIG_BOARD_EARLY_INIT_F
-+#endif
-+
-+#ifdef CONFIG_NAND
-+#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
-+#endif
-+
-+/* Common define for many platforms. */
-+#define CONFIG_OMAP
-+#define CONFIG_OMAP_COMMON
-+#define CONFIG_SYS_GENERIC_BOARD
-+
-+/*
-+ * We typically do not contain NOR flash. In the cases where we do, we
-+ * undefine this later.
-+ */
-+#define CONFIG_SYS_NO_FLASH
-+
-+/* Support both device trees and ATAGs. */
-+#define CONFIG_OF_LIBFDT
-+#define CONFIG_CMDLINE_TAG
-+#define CONFIG_SETUP_MEMORY_TAGS
-+#define CONFIG_INITRD_TAG
-+
-+/*
-+ * Our DDR memory always starts at 0x80000000 and U-Boot shall have
-+ * relocated itself to higher in memory by the time this value is used.
-+ * However, set this to a 32MB offset to allow for easier Linux kernel
-+ * booting as the default is often used as the kernel load address.
-+ */
-+#define CONFIG_SYS_LOAD_ADDR 0x82000000
-+
-+/*
-+ * We setup defaults based on constraints from the Linux kernel, which should
-+ * also be safe elsewhere. We have the default load at 32MB into DDR (for
-+ * the kernel), FDT above 128MB (the maximum location for the end of the
-+ * kernel), and the ramdisk 512KB above that (allowing for hopefully never
-+ * seen large trees). We say all of this must be within the first 256MB
-+ * as that will normally be within the kernel lowmem and thus visible via
-+ * bootm_size and we only run on platforms with 256MB or more of memory.
-+ */
-+#ifdef CONFIG_RAM128MB
-+#define DEFAULT_LINUX_BOOT_ENV \
-+ "loadaddr=0x82000000\0" \
-+ "kernel_addr_r=0x82000000\0" \
-+ "fdtaddr=0x84000000\0" \
-+ "fdt_addr_r=0x84000000\0" \
-+ "rdaddr=0x84080000\0" \
-+ "ramdisk_addr_r=0x84080000\0" \
-+ "bootm_size=0x8000000\0"
-+#else
-+#define DEFAULT_LINUX_BOOT_ENV \
-+ "loadaddr=0x82000000\0" \
-+ "kernel_addr_r=0x82000000\0" \
-+ "fdtaddr=0x88000000\0" \
-+ "fdt_addr_r=0x88000000\0" \
-+ "rdaddr=0x88080000\0" \
-+ "ramdisk_addr_r=0x88080000\0" \
-+ "bootm_size=0x10000000\0"
-+#endif
-+
-+/*
-+ * Default to a quick boot delay.
-+ */
-+#define CONFIG_BOOTDELAY 1
-+
-+/*
-+ * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
-+ * we say (for simplicity) that we have 1 bank, always, even when
-+ * we have more. We always start at 0x80000000, and we place the
-+ * initial stack pointer in our SRAM. Otherwise, we can define
-+ * CONFIG_NR_DRAM_BANKS before including this file.
-+ */
-+#ifndef CONFIG_NR_DRAM_BANKS
-+#define CONFIG_NR_DRAM_BANKS 1
-+#endif
-+#define CONFIG_SYS_SDRAM_BASE 0x80000000
-+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
-+ GENERATED_GBL_DATA_SIZE)
-+
-+/* Timer information. */
-+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-+
-+/* I2C IP block */
-+#define CONFIG_I2C
-+#define CONFIG_CMD_I2C
-+#define CONFIG_SYS_I2C
-+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-+#define CONFIG_SYS_I2C_OMAP24XX
-+
-+/* MMC/SD IP block */
-+#define CONFIG_MMC
-+#define CONFIG_GENERIC_MMC
-+#define CONFIG_OMAP_HSMMC
-+#define CONFIG_CMD_MMC
-+
-+/* McSPI IP block */
-+#define CONFIG_SPI
-+#define CONFIG_OMAP3_SPI
-+#define CONFIG_CMD_SPI
-+
-+/* GPIO block */
-+#define CONFIG_OMAP_GPIO
-+#define CONFIG_CMD_GPIO
-+
-+/*
-+ * GPMC NAND block. We support 1 device and the physical address to
-+ * access CS0 at is 0x8000000.
-+ */
-+#ifdef CONFIG_NAND
-+#define CONFIG_NAND_OMAP_GPMC
-+#ifndef CONFIG_SYS_NAND_BASE
-+#define CONFIG_SYS_NAND_BASE 0x8000000
-+#endif
-+#define CONFIG_SYS_MAX_NAND_DEVICE 1
-+#define CONFIG_CMD_NAND
-+#endif
-+
-+/*
-+ * The following are general good-enough settings for U-Boot. We set a
-+ * large malloc pool as we generally have a lot of DDR, and we opt for
-+ * function over binary size in the main portion of U-Boot as this is
-+ * generally easily constrained later if needed. We enable the config
-+ * options that give us information in the environment about what board
-+ * we are on so we do not need to rely on the command prompt. We set a
-+ * console baudrate of 115200 and use the default baud rate table.
-+ */
-+#define CONFIG_SYS_MALLOC_LEN (16 << 20)
-+#define CONFIG_SYS_HUSH_PARSER
-+#define CONFIG_SYS_PROMPT "U-Boot# "
-+#define CONFIG_SYS_CONSOLE_INFO_QUIET
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
-+#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
-+
-+/* As stated above, the following choices are optional. */
-+#define CONFIG_SYS_LONGHELP
-+#define CONFIG_AUTO_COMPLETE
-+#define CONFIG_CMDLINE_EDITING
-+#define CONFIG_VERSION_VARIABLE
-+
-+/* We set the max number of command args high to avoid HUSH bugs. */
-+#define CONFIG_SYS_MAXARGS 64
-+
-+/* Console I/O Buffer Size */
-+#define CONFIG_SYS_CBSIZE 512
-+/* Print Buffer Size */
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
-+ + sizeof(CONFIG_SYS_PROMPT) + 16)
-+/* Boot Argument Buffer Size */
-+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-+
-+/*
-+ * When we have SPI, NOR or NAND flash we expect to be making use of
-+ * mtdparts, both for ease of use in U-Boot and for passing information
-+ * on to the Linux kernel.
-+ */
-+#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND)
-+#define CONFIG_MTD_DEVICE /* Required for mtdparts */
-+#define CONFIG_CMD_MTDPARTS
-+#endif
-+
-+/*
-+ * For commands to use, we take the default list and add a few other
-+ * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH
-+ * prior to this include, in order to skip a few commands. When we do
-+ * have flash, if we expect these commands they must be enabled in that
-+ * config. If desired, a specific list of desired commands can be used
-+ * instead.
-+ */
-+#include <config_cmd_default.h>
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_ECHO
-+#define CONFIG_CMD_BOOTZ
-+
-+/*
-+ * Common filesystems support. When we have removable storage we
-+ * enabled a number of useful commands and support.
-+ */
-+#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-+#define CONFIG_DOS_PARTITION
-+#define CONFIG_CMD_FAT
-+#define CONFIG_FAT_WRITE
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
-+#endif
-+
-+/*
-+ * Our platforms make use of SPL to initalize the hardware (primarily
-+ * memory) enough for full U-Boot to be loaded. We also support Falcon
-+ * Mode so that the Linux kernel can be booted directly from SPL
-+ * instead, if desired. We make use of the general SPL framework found
-+ * under common/spl/. Given our generally common memory map, we set a
-+ * number of related defaults and sizes here.
-+ */
-+#if !defined(CONFIG_NOR_BOOT) && \
-+ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
-+#define CONFIG_SPL
-+#define CONFIG_SPL_FRAMEWORK
-+#define CONFIG_SPL_OS_BOOT
-+
-+/*
-+ * Place the image at the start of the ROM defined image space.
-+ * We limit our size to the ROM-defined downloaded image area, and use the
-+ * rest of the space for stack. We load U-Boot itself into memory at
-+ * 0x80800000 for legacy reasons (to not conflict with older SPLs). We
-+ * have our BSS be placed 1MiB after this, to allow for the default
-+ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case.
-+ * We have the SPL malloc pool at the end of the BSS area.
-+ */
-+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-+#ifndef CONFIG_SYS_TEXT_BASE
-+#define CONFIG_SYS_TEXT_BASE 0x80800000
-+#endif
-+#ifndef CONFIG_SPL_BSS_START_ADDR
-+#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
-+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-+#endif
-+#ifndef CONFIG_SYS_SPL_MALLOC_START
-+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
-+ CONFIG_SPL_BSS_MAX_SIZE)
-+#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
-+#endif
-+
-+/* RAW SD card / eMMC locations. */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-+
-+/* FAT sd card locations. */
-+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
-+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
-+
-+#ifdef CONFIG_SPL_OS_BOOT
-+/* FAT */
-+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
-+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
-+
-+/* RAW SD card / eMMC */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
-+
-+/* NAND */
-+#ifdef CONFIG_NAND
-+#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
-+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
-+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
-+#endif
-+
-+/* spl export command */
-+#define CONFIG_CMD_SPL
-+#endif
-+
-+#ifdef CONFIG_MMC
-+#define CONFIG_SPL_LIBDISK_SUPPORT
-+#define CONFIG_SPL_MMC_SUPPORT
-+#define CONFIG_SPL_FAT_SUPPORT
-+#endif
-+
-+/* General parts of the framework, required. */
-+#define CONFIG_SPL_I2C_SUPPORT
-+#define CONFIG_SPL_LIBCOMMON_SUPPORT
-+#define CONFIG_SPL_LIBGENERIC_SUPPORT
-+#define CONFIG_SPL_SERIAL_SUPPORT
-+#define CONFIG_SPL_GPIO_SUPPORT
-+#define CONFIG_SPL_BOARD_INIT
-+
-+#ifdef CONFIG_NAND
-+#define CONFIG_SPL_NAND_SUPPORT
-+#define CONFIG_SPL_NAND_BASE
-+#define CONFIG_SPL_NAND_DRIVERS
-+#define CONFIG_SPL_NAND_ECC
-+#define CONFIG_SPL_MTD_SUPPORT
-+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-+/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ /* Defined later in this configuration */
-+#endif
-+#endif /* !CONFIG_NOR_BOOT */
-+
-+#ifndef CONFIG_SPL_BUILD
-+# define CONFIG_FIT
-+# define CONFIG_TIMESTAMP
-+# define CONFIG_LZO
-+# ifdef CONFIG_ENABLE_VBOOT
-+# define CONFIG_OF_CONTROL
-+# define CONFIG_OF_SEPARATE
-+# define CONFIG_DEFAULT_DEVICE_TREE am335x-chiliboard
-+# define CONFIG_FIT_SIGNATURE
-+# define CONFIG_RSA
-+# endif
-+#endif
-+
-+#define CONFIG_SYS_BOOTM_LEN (16 << 20)
-+
-+#define CONFIG_BOARD_LATE_INIT
-+
-+#define CONFIG_SERIAL1 1
-+#define CONFIG_CONS_INDEX 1
-+
-+/* Clock Defines */
-+#define V_OSCK 24000000 /* Clock output from T2 */
-+#define V_SCLK (V_OSCK)
-+
-+/* Custom script for NOR */
-+#define CONFIG_SYS_LDSCRIPT "board/grinn/chiliboard/u-boot.lds"
-+
-+/* Always 128 KiB env size */
-+#define CONFIG_ENV_SIZE (128 << 10)
-+
-+/* Enhance our eMMC support / experience. */
-+#define CONFIG_CMD_GPT
-+#define CONFIG_EFI_PARTITION
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_PART
-+
-+#ifdef CONFIG_NAND
-+#ifndef CONFIG_NAND512MB
-+#define NANDARGS \
-+ "mtdids=" MTDIDS_DEFAULT "\0" \
-+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
-+ "nandargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${nandroot} " \
-+ "rootfstype=${nandrootfstype}\0" \
-+ "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
-+ "nandrootfstype=ubifs rootwait=1\0" \
-+ "nandboot=echo Booting from nand ...; " \
-+ "run nandargs; " \
-+ "nand read ${fdtaddr} u-boot-spl-os; " \
-+ "nand read ${loadaddr} kernel; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0"
-+#else
-+#define NANDARGS \
-+ "mtdids=" MTDIDS_DEFAULT "\0" \
-+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
-+ "nandargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${nandroot} " \
-+ "rootfstype=${nandrootfstype}\0" \
-+ "nandroot=ubi0:rootfs rw ubi.mtd=8,4096\0" \
-+ "nandrootfstype=ubifs rootwait=1\0" \
-+ "nandboot=echo Booting from nand ...; " \
-+ "run nandargs; " \
-+ "nand read ${fdtaddr} u-boot-spl-os; " \
-+ "nand read ${loadaddr} kernel; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0"
-+#endif
-+#else
-+#define NANDARGS ""
-+#endif
-+
-+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-+
-+#ifndef CONFIG_SPL_BUILD
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ DEFAULT_LINUX_BOOT_ENV \
-+ "boot_fdt=try\0" \
-+ "bootpart=0:2\0" \
-+ "bootdir=/boot\0" \
-+ "bootfile=zImage\0" \
-+ "fdtfile=undefined\0" \
-+ "console=ttyO0,115200n8\0" \
-+ "partitions=" \
-+ "uuid_disk=${uuid_gpt_disk};" \
-+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
-+ "optargs=\0" \
-+ "mmcdev=0\0" \
-+ "mmcroot=/dev/mmcblk0p2 rw\0" \
-+ "mmcrootfstype=ext4 rootwait\0" \
-+ "rootpath=/export/rootfs\0" \
-+ "nfsopts=nolock\0" \
-+ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-+ "::off\0" \
-+ "ramroot=/dev/ram0 rw\0" \
-+ "ramrootfstype=ext2\0" \
-+ "mmcargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${mmcroot} " \
-+ "rootfstype=${mmcrootfstype}\0" \
-+ "spiroot=/dev/mtdblock4 rw\0" \
-+ "spirootfstype=jffs2\0" \
-+ "spisrcaddr=0xe0000\0" \
-+ "spiimgsize=0x362000\0" \
-+ "spibusno=0\0" \
-+ "spiargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${spiroot} " \
-+ "rootfstype=${spirootfstype}\0" \
-+ "netargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=/dev/nfs " \
-+ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-+ "ip=dhcp\0" \
-+ "bootenv=uEnv.txt\0" \
-+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-+ "importbootenv=echo Importing environment from mmc ...; " \
-+ "env import -t $loadaddr $filesize\0" \
-+ "ramargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${ramroot} " \
-+ "rootfstype=${ramrootfstype}\0" \
-+ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-+ "mmcloados=run mmcargs; " \
-+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-+ "if run loadfdt; then " \
-+ "bootz ${loadaddr} - ${fdtaddr}; " \
-+ "else " \
-+ "if test ${boot_fdt} = try; then " \
-+ "bootz; " \
-+ "else " \
-+ "echo WARN: Cannot load the DT; " \
-+ "fi; " \
-+ "fi; " \
-+ "else " \
-+ "bootz; " \
-+ "fi;\0" \
-+ "mmcboot=mmc dev ${mmcdev}; " \
-+ "if mmc rescan; then " \
-+ "echo SD/MMC found on device ${mmcdev};" \
-+ "if run loadbootenv; then " \
-+ "echo Loaded environment from ${bootenv};" \
-+ "run importbootenv;" \
-+ "fi;" \
-+ "if test -n $uenvcmd; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "if run loadimage; then " \
-+ "run mmcloados;" \
-+ "fi;" \
-+ "fi;\0" \
-+ "spiboot=echo Booting from spi ...; " \
-+ "run spiargs; " \
-+ "sf probe ${spibusno}:0; " \
-+ "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
-+ "bootz ${loadaddr}\0" \
-+ "netboot=echo Booting from network ...; " \
-+ "setenv autoload no; " \
-+ "dhcp; " \
-+ "tftp ${loadaddr} ${bootfile}; " \
-+ "tftp ${fdtaddr} ${fdtfile}; " \
-+ "run netargs; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0" \
-+ "ramboot=echo Booting from ramdisk ...; " \
-+ "run ramargs; " \
-+ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+ "findfdt="\
-+ "setenv fdtfile am335x-chiliboard.dtb;\0" \
-+ NANDARGS \
-+ DFUARGS
-+#endif
-+
-+#define CONFIG_BOOTCOMMAND \
-+ "run findfdt; " \
-+ "run mmcboot;" \
-+ "setenv mmcdev 1; " \
-+ "setenv bootpart 1:2; " \
-+ "run mmcboot;" \
-+ "run nandboot;"
-+
-+/* NS16550 Configuration */
-+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
-+#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
-+#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
-+#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
-+#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-+#define CONFIG_BAUDRATE 115200
-+
-+/*
-+#define CONFIG_CMD_EEPROM
-+#define CONFIG_ENV_EEPROM_IS_ON_I2C
-+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-+#define CONFIG_SYS_I2C_MULTI_EEPROMS
-+*/
-+
-+/* PMIC support */
-+#define CONFIG_POWER_TPS65217
-+/* #define CONFIG_POWER_TPS65910 */
-+
-+/* SPL */
-+#ifndef CONFIG_NOR_BOOT
-+#define CONFIG_SPL_POWER_SUPPORT
-+#define CONFIG_SPL_YMODEM_SUPPORT
-+
-+/* Bootcount using the RTC block */
-+#define CONFIG_BOOTCOUNT_LIMIT
-+#define CONFIG_BOOTCOUNT_AM33XX
-+
-+/* USB gadget RNDIS */
-+#define CONFIG_SPL_MUSB_NEW_SUPPORT
-+
-+/* General network SPL, both CPSW and USB gadget RNDIS */
-+#define CONFIG_SPL_NET_SUPPORT
-+#define CONFIG_SPL_ENV_SUPPORT
-+#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
-+
-+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
-+
-+#ifdef CONFIG_NAND
-+#define CONFIG_NAND_OMAP_GPMC
-+#define CONFIG_NAND_OMAP_ELM
-+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
-+ CONFIG_SYS_NAND_PAGE_SIZE)
-+
-+#ifndef CONFIG_NAND512MB
-+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-+#define CONFIG_SYS_NAND_OOBSIZE 64
-+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
-+ 10, 11, 12, 13, 14, 15, 16, 17, \
-+ 18, 19, 20, 21, 22, 23, 24, 25, \
-+ 26, 27, 28, 29, 30, 31, 32, 33, \
-+ 34, 35, 36, 37, 38, 39, 40, 41, \
-+ 42, 43, 44, 45, 46, 47, 48, 49, \
-+ 50, 51, 52, 53, 54, 55, 56, 57, }
-+
-+#define CONFIG_SYS_NAND_ECCSIZE 512
-+#define CONFIG_SYS_NAND_ECCBYTES 14
-+#define CONFIG_SYS_NAND_ONFI_DETECTION
-+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
-+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-+#else
-+#define CONFIG_SYS_NAND_PAGE_SIZE 4096
-+#define CONFIG_SYS_NAND_OOBSIZE 224
-+#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024)
-+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-+#define CONFIG_SYS_NAND_ECCPOS {\
-+ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\
-+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\
-+ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\
-+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\
-+ 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\
-+ 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\
-+ 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\
-+ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\
-+ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,\
-+ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119,\
-+ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129,\
-+ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139,\
-+ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149,\
-+ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,\
-+ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,\
-+ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179,\
-+ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189,\
-+ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199,\
-+ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
-+
-+#define CONFIG_SYS_NAND_ECCSIZE 512
-+#define CONFIG_SYS_NAND_ECCBYTES 26
-+#define CONFIG_SYS_NAND_ONFI_DETECTION
-+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
-+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x100000
-+#endif
-+
-+#endif
-+#endif
-+
-+/*
-+ * For NOR boot, we must set this to the start of where NOR is mapped
-+ * in memory.
-+ */
-+#ifdef CONFIG_NOR_BOOT
-+#define CONFIG_SYS_TEXT_BASE 0x08000000
-+#endif
-+
-+/*
-+ * USB configuration. We enable MUSB support, both for host and for
-+ * gadget. We set USB0 as peripheral and USB1 as host, based on the
-+ * board schematic and physical port wired to each. Then for host we
-+ * add mass storage support and for gadget we add both RNDIS ethernet
-+ * and DFU.
-+ */
-+#define CONFIG_USB_MUSB_DSPS
-+#define CONFIG_ARCH_MISC_INIT
-+#define CONFIG_MUSB_GADGET
-+#define CONFIG_MUSB_PIO_ONLY
-+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
-+#define CONFIG_USB_GADGET
-+#define CONFIG_USBDOWNLOAD_GADGET
-+#define CONFIG_USB_GADGET_DUALSPEED
-+#define CONFIG_USB_GADGET_VBUS_DRAW 2
-+#define CONFIG_MUSB_HOST
-+#define CONFIG_AM335X_USB0
-+#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
-+#define CONFIG_AM335X_USB1
-+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-+
-+#ifdef CONFIG_MUSB_HOST
-+#define CONFIG_CMD_USB
-+#define CONFIG_USB_STORAGE
-+#endif
-+
-+#ifdef CONFIG_MUSB_GADGET
-+#define CONFIG_USB_ETHER
-+#define CONFIG_USB_ETH_RNDIS
-+#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-+
-+/* USB TI's IDs */
-+#define CONFIG_G_DNL_VENDOR_NUM 0x0403
-+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
-+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
-+#endif /* CONFIG_MUSB_GADGET */
-+
-+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
-+/* disable host part of MUSB in SPL */
-+#undef CONFIG_MUSB_HOST
-+/* disable EFI partitions and partition UUID support */
-+#undef CONFIG_PARTITION_UUIDS
-+#undef CONFIG_EFI_PARTITION
-+/*
-+ * Disable CPSW SPL support so we fit within the 101KiB limit.
-+ */
-+#undef CONFIG_SPL_ETH_SUPPORT
-+#endif
-+
-+/* USB Device Firmware Update support */
-+#ifndef CONFIG_SPL_BUILD
-+#define CONFIG_DFU_FUNCTION
-+#define CONFIG_DFU_MMC
-+#define CONFIG_CMD_DFU
-+#define DFU_ALT_INFO_MMC \
-+ "dfu_alt_info_mmc=" \
-+ "boot part 0 1;" \
-+ "rootfs part 0 2;" \
-+ "MLO fat 0 1;" \
-+ "MLO.raw mmc 0x100 0x100;" \
-+ "u-boot.img.raw mmc 0x300 0x400;" \
-+ "spl-os-args.raw mmc 0x80 0x80;" \
-+ "spl-os-image.raw mmc 0x900 0x2000;" \
-+ "spl-os-args fat 0 1;" \
-+ "spl-os-image fat 0 1;" \
-+ "u-boot.img fat 0 1;" \
-+ "uEnv.txt fat 0 1\0"
-+#ifdef CONFIG_NAND
-+#define CONFIG_DFU_NAND
-+#define DFU_ALT_INFO_NAND \
-+ "dfu_alt_info_nand=" \
-+ "SPL part 0 1;" \
-+ "SPL.backup1 part 0 2;" \
-+ "SPL.backup2 part 0 3;" \
-+ "SPL.backup3 part 0 4;" \
-+ "u-boot part 0 5;" \
-+ "u-boot-spl-os part 0 6;" \
-+ "kernel part 0 8;" \
-+ "rootfs part 0 9\0"
-+#else
-+#define DFU_ALT_INFO_NAND ""
-+#endif
-+#define CONFIG_DFU_RAM
-+#define DFU_ALT_INFO_RAM \
-+ "dfu_alt_info_ram=" \
-+ "kernel ram 0x80200000 0xD80000;" \
-+ "fdt ram 0x80F80000 0x80000;" \
-+ "ramdisk ram 0x81000000 0x4000000\0"
-+#define DFUARGS \
-+ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
-+ DFU_ALT_INFO_MMC \
-+ DFU_ALT_INFO_RAM \
-+ DFU_ALT_INFO_NAND
-+#endif
-+
-+/*
-+ * Default to using SPI for environment, etc.
-+ * 0x000000 - 0x020000 : SPL (128KiB)
-+ * 0x020000 - 0x0A0000 : U-Boot (512KiB)
-+ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
-+ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
-+ * 0x0E0000 - 0x442000 : Linux Kernel
-+ * 0x442000 - 0x800000 : Userland
-+ */
-+#if defined(CONFIG_SPI_BOOT)
-+/* SPL related */
-+#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
-+#define CONFIG_SPL_SPI_SUPPORT
-+#define CONFIG_SPL_SPI_FLASH_SUPPORT
-+#define CONFIG_SPL_SPI_LOAD
-+#define CONFIG_SPL_SPI_BUS 0
-+#define CONFIG_SPL_SPI_CS 0
-+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
-+
-+#define CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-+#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
-+#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
-+#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
-+#define MTDIDS_DEFAULT "nor0=m25p80-flash.0"
-+#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \
-+ "512k(u-boot),128k(u-boot-env1)," \
-+ "128k(u-boot-env2),3464k(kernel)," \
-+ "-(rootfs)"
-+#elif defined(CONFIG_EMMC_BOOT)
-+#undef CONFIG_ENV_IS_NOWHERE
-+#define CONFIG_ENV_IS_IN_MMC
-+#define CONFIG_SYS_MMC_ENV_DEV 1
-+#define CONFIG_SYS_MMC_ENV_PART 2
-+#define CONFIG_ENV_OFFSET 0x0
-+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-+#endif
-+
-+/* SPI flash. */
-+#define CONFIG_CMD_SF
-+#define CONFIG_SPI_FLASH
-+#define CONFIG_SPI_FLASH_WINBOND
-+#define CONFIG_SF_DEFAULT_SPEED 24000000
-+
-+/* Network. */
-+#define CONFIG_PHY_GIGE
-+#define CONFIG_PHYLIB
-+#define CONFIG_PHY_SMSC
-+
-+/* NAND support */
-+#ifdef CONFIG_NAND
-+#define CONFIG_CMD_NAND
-+#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-+
-+#ifndef CONFIG_NAND512MB
-+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
-+ "128k(SPL.backup1)," \
-+ "128k(SPL.backup2)," \
-+ "128k(SPL.backup3),1792k(u-boot)," \
-+ "128k(u-boot-spl-os)," \
-+ "128k(u-boot-env),5m(kernel),-(rootfs)"
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
-+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-+#else
-+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:256k(SPL)," \
-+ "256k(SPL.backup1)," \
-+ "256k(SPL.backup2)," \
-+ "256k(SPL.backup3),2048k(u-boot)," \
-+ "256k(u-boot-spl-os)," \
-+ "256k(u-boot-env),5m(kernel),-(rootfs)"
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_OFFSET 0x340000 /* environment starts here */
-+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-+#endif
-+
-+#endif
-+#endif
-+
-+/*
-+ * NOR Size = 16 MiB
-+ * Number of Sectors/Blocks = 128
-+ * Sector Size = 128 KiB
-+ * Word length = 16 bits
-+ * Default layout:
-+ * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
-+ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
-+ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
-+ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
-+ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
-+ */
-+#if defined(CONFIG_NOR)
-+#undef CONFIG_SYS_NO_FLASH
-+#define CONFIG_CMD_FLASH
-+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-+#define CONFIG_SYS_FLASH_PROTECTION
-+#define CONFIG_SYS_FLASH_CFI
-+#define CONFIG_FLASH_CFI_DRIVER
-+#define CONFIG_FLASH_CFI_MTD
-+#define CONFIG_SYS_MAX_FLASH_SECT 128
-+#define CONFIG_SYS_MAX_FLASH_BANKS 1
-+#define CONFIG_SYS_FLASH_BASE (0x08000000)
-+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-+/* Reduce SPL size by removing unlikey targets */
-+#ifdef CONFIG_NOR_BOOT
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-+#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */
-+#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */
-+#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
-+#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
-+ "512k(u-boot)," \
-+ "128k(u-boot-env1)," \
-+ "128k(u-boot-env2)," \
-+ "4m(kernel),-(rootfs)"
-+#endif
-+#endif /* NOR support */
-+
-+#endif /* ! __CONFIG_CHILISOM_H */
---
-2.5.0
-
diff --git a/libre-testing/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch
deleted file mode 100644
index fc41962ef..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,423 +0,0 @@
-diff -Nur u-boot-2014.07.orig/include/config_distro_bootcmd.h u-boot-2014.07/include/config_distro_bootcmd.h
---- u-boot-2014.07.orig/include/config_distro_bootcmd.h 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2014.07/include/config_distro_bootcmd.h 2015-04-13 11:53:03.000000000 -0300
-@@ -0,0 +1,236 @@
-+/*
-+ * (C) Copyright 2014
-+ * NVIDIA Corporation <www.nvidia.com>
-+ *
-+ * Copyright 2014 Red Hat, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
-+#define _CONFIG_CMD_DISTRO_BOOTCMD_H
-+
-+/*
-+ * A note on error handling: It is possible for BOOT_TARGET_DEVICES to
-+ * reference a device that is not enabled in the U-Boot configuration, e.g.
-+ * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given
-+ * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor
-+ * at compile time, it's not possible to detect and report such problems via
-+ * a simple #ifdef/#error combination. Still, the code needs to report errors.
-+ * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to
-+ * reference a non-existent symbol, and have the name of that symbol encode
-+ * the error message. Consequently, this file contains references to e.g.
-+ * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the
-+ * prevalence of capitals here, this looks like a pre-processor macro and
-+ * hence seems like it should be all capitals, but it's really an error
-+ * message that includes some other pre-processor symbols in the text.
-+ */
-+
-+/* We need the part command */
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_PART
-+
-+#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
-+ "if " #devtypel " dev ${devnum}; then " \
-+ "setenv devtype " #devtypel "; " \
-+ "run scan_dev_for_boot_part; " \
-+ "fi\0"
-+
-+#define BOOTENV_SHARED_BLKDEV(devtypel) \
-+ #devtypel "_boot=" \
-+ BOOTENV_SHARED_BLKDEV_BODY(devtypel)
-+
-+#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \
-+ "bootcmd_" #devtypel #instance "=" \
-+ "setenv devnum " #instance "; " \
-+ "run " #devtypel "_boot\0"
-+
-+#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \
-+ #devtypel #instance " "
-+
-+#ifdef CONFIG_CMD_MMC
-+#define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc)
-+#define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_MMC
-+#define BOOTENV_DEV_MMC \
-+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
-+#define BOOTENV_DEV_NAME_MMC \
-+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
-+#endif
-+
-+#ifdef CONFIG_CMD_SATA
-+#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata)
-+#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_SATA
-+#define BOOTENV_DEV_SATA \
-+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
-+#define BOOTENV_DEV_NAME_SATA \
-+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
-+#endif
-+
-+#ifdef CONFIG_CMD_SCSI
-+#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
-+#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; "
-+#define BOOTENV_SHARED_SCSI \
-+ "scsi_init=" \
-+ "if ${scsi_need_init}; then " \
-+ "setenv scsi_need_init false; " \
-+ "scsi scan; " \
-+ "fi\0" \
-+ \
-+ "scsi_boot=" \
-+ BOOTENV_RUN_SCSI_INIT \
-+ BOOTENV_SHARED_BLKDEV_BODY(scsi)
-+#define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_RUN_SCSI_INIT
-+#define BOOTENV_SET_SCSI_NEED_INIT
-+#define BOOTENV_SHARED_SCSI
-+#define BOOTENV_DEV_SCSI \
-+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
-+#define BOOTENV_DEV_NAME_SCSI \
-+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
-+#endif
-+
-+#ifdef CONFIG_CMD_IDE
-+#define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide)
-+#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_IDE
-+#define BOOTENV_DEV_IDE \
-+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
-+#define BOOTENV_DEV_NAME_IDE \
-+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
-+#endif
-+
-+#ifdef CONFIG_CMD_USB
-+#define BOOTENV_RUN_USB_INIT "usb start; "
-+#define BOOTENV_SHARED_USB \
-+ "usb_boot=" \
-+ BOOTENV_RUN_USB_INIT \
-+ BOOTENV_SHARED_BLKDEV_BODY(usb)
-+#define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_RUN_USB_INIT
-+#define BOOTENV_SHARED_USB
-+#define BOOTENV_DEV_USB \
-+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
-+#define BOOTENV_DEV_NAME_USB \
-+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
-+#endif
-+
-+#if defined(CONFIG_CMD_DHCP)
-+#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
-+ "bootcmd_dhcp=" \
-+ BOOTENV_RUN_USB_INIT \
-+ "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
-+ "source ${scriptaddr}; " \
-+ "fi\0"
-+#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
-+ "dhcp "
-+#else
-+#define BOOTENV_DEV_DHCP \
-+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
-+#define BOOTENV_DEV_NAME_DHCP \
-+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
-+#endif
-+
-+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
-+#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
-+ "bootcmd_pxe=" \
-+ BOOTENV_RUN_USB_INIT \
-+ "dhcp; " \
-+ "if pxe get; then " \
-+ "pxe boot; " \
-+ "fi\0"
-+#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \
-+ "pxe "
-+#else
-+#define BOOTENV_DEV_PXE \
-+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
-+#define BOOTENV_DEV_NAME_PXE \
-+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
-+#endif
-+
-+#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \
-+ BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance)
-+#define BOOTENV_BOOT_TARGETS \
-+ "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
-+
-+#define BOOTENV_DEV(devtypeu, devtypel, instance) \
-+ BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
-+#define BOOTENV \
-+ BOOTENV_SHARED_MMC \
-+ BOOTENV_SHARED_USB \
-+ BOOTENV_SHARED_SATA \
-+ BOOTENV_SHARED_SCSI \
-+ BOOTENV_SHARED_IDE \
-+ "boot_prefixes=/ /boot/\0" \
-+ "boot_scripts=boot.scr.uimg boot.scr\0" \
-+ "boot_script_dhcp=boot.scr.uimg\0" \
-+ BOOTENV_BOOT_TARGETS \
-+ \
-+ "boot_extlinux=" \
-+ "sysboot ${devtype} ${devnum}:${bootpart} any " \
-+ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
-+ \
-+ "scan_dev_for_extlinux=" \
-+ "if test -e ${devtype} ${devnum}:${bootpart} " \
-+ "${prefix}extlinux/extlinux.conf; then " \
-+ "echo Found ${prefix}extlinux/extlinux.conf; " \
-+ "run boot_extlinux; " \
-+ "echo SCRIPT FAILED: continuing...; " \
-+ "fi\0" \
-+ \
-+ "boot_a_script=" \
-+ "load ${devtype} ${devnum}:${bootpart} " \
-+ "${scriptaddr} ${prefix}${script}; " \
-+ "source ${scriptaddr}\0" \
-+ \
-+ "scan_dev_for_scripts=" \
-+ "for script in ${boot_scripts}; do " \
-+ "if test -e ${devtype} ${devnum}:${bootpart} " \
-+ "${prefix}${script}; then " \
-+ "echo Found U-Boot script " \
-+ "${prefix}${script}; " \
-+ "run boot_a_script; " \
-+ "echo SCRIPT FAILED: continuing...; " \
-+ "fi; " \
-+ "done\0" \
-+ \
-+ "scan_dev_for_boot=" \
-+ "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \
-+ "for prefix in ${boot_prefixes}; do " \
-+ "run scan_dev_for_extlinux; " \
-+ "run scan_dev_for_scripts; " \
-+ "done\0" \
-+ \
-+ "scan_dev_for_boot_part=" \
-+ "part list ${devtype} ${devnum} -bootable devplist; " \
-+ "env exists devplist || setenv devplist 1; " \
-+ "for bootpart in ${devplist}; do " \
-+ "if fstype ${devtype} ${devnum}:${bootpart} " \
-+ "bootfstype; then " \
-+ "run scan_dev_for_boot; " \
-+ "fi; " \
-+ "done\0" \
-+ \
-+ BOOT_TARGET_DEVICES(BOOTENV_DEV) \
-+ \
-+ "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \
-+ "for target in ${boot_targets}; do " \
-+ "run bootcmd_${target}; " \
-+ "done\0"
-+
-+#ifndef CONFIG_BOOTCOMMAND
-+#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
-+#endif
-+
-+#endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */
-diff -Nur u-boot-2014.07.orig/include/configs/chiliboard.h u-boot-2014.07/include/configs/chiliboard.h
---- u-boot-2014.07.orig/include/configs/chiliboard.h 2016-02-25 00:53:19.766846991 -0300
-+++ u-boot-2014.07/include/configs/chiliboard.h 2016-02-25 00:57:01.436205462 -0300
-@@ -124,7 +124,6 @@
- * as that will normally be within the kernel lowmem and thus visible via
- * bootm_size and we only run on platforms with 256MB or more of memory.
- */
--#ifdef CONFIG_RAM128MB
- #define DEFAULT_LINUX_BOOT_ENV \
- "loadaddr=0x82000000\0" \
- "kernel_addr_r=0x82000000\0" \
-@@ -133,16 +132,6 @@
- "rdaddr=0x84080000\0" \
- "ramdisk_addr_r=0x84080000\0" \
- "bootm_size=0x8000000\0"
--#else
--#define DEFAULT_LINUX_BOOT_ENV \
-- "loadaddr=0x82000000\0" \
-- "kernel_addr_r=0x82000000\0" \
-- "fdtaddr=0x88000000\0" \
-- "fdt_addr_r=0x88000000\0" \
-- "rdaddr=0x88080000\0" \
-- "ramdisk_addr_r=0x88080000\0" \
-- "bootm_size=0x10000000\0"
--#endif
-
- /*
- * Default to a quick boot delay.
-@@ -258,6 +247,7 @@
- #define CONFIG_CMD_ASKENV
- #define CONFIG_CMD_ECHO
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
-
- /*
- * Common filesystems support. When we have removable storage we
-@@ -398,6 +388,9 @@
- #define CONFIG_EFI_PARTITION
- #define CONFIG_PARTITION_UUIDS
- #define CONFIG_CMD_PART
-+#define CONFIG_CMD_SETEXPR
-+
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-
- #ifdef CONFIG_NAND
- #ifndef CONFIG_NAND512MB
-@@ -437,12 +430,20 @@
-
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- DEFAULT_LINUX_BOOT_ENV \
- "boot_fdt=try\0" \
-- "bootpart=0:2\0" \
-+ "bootpart=0:1\0" \
- "bootdir=/boot\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "bootfile=zImage\0" \
- "fdtfile=undefined\0" \
- "console=ttyO0,115200n8\0" \
-@@ -450,9 +451,6 @@
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- "optargs=\0" \
-- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext4 rootwait\0" \
- "rootpath=/export/rootfs\0" \
- "nfsopts=nolock\0" \
- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-@@ -461,8 +459,7 @@
- "ramrootfstype=ext2\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-+ "root=${root}\0" \
- "spiroot=/dev/mtdblock4 rw\0" \
- "spirootfstype=jffs2\0" \
- "spisrcaddr=0xe0000\0" \
-@@ -477,46 +474,48 @@
- "root=/dev/nfs " \
- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
- "ip=dhcp\0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t $loadaddr $filesize\0" \
- "ramargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${ramroot} " \
- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcloados=run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdtaddr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-- "mmcboot=mmc dev ${mmcdev}; " \
-- "if mmc rescan; then " \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadimage; then " \
-- "run mmcloados;" \
-- "fi;" \
-- "fi;\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=for devtype in mmc; do " \
-+ "for devnum in 0 1; do " \
-+ "if ${devtype} dev ${devnum}; then " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "fi;" \
-+ "done;" \
-+ "done;\0" \
- "spiboot=echo Booting from spi ...; " \
- "run spiargs; " \
- "sf probe ${spibusno}:0; " \
-@@ -541,9 +540,6 @@
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run mmcboot;" \
-- "setenv mmcdev 1; " \
-- "setenv bootpart 1:2; " \
-- "run mmcboot;" \
- "run nandboot;"
-
- /* NS16550 Configuration */
diff --git a/libre-testing/uboot4extlinux-chiliboard/PKGBUILD b/libre-testing/uboot4extlinux-chiliboard/PKGBUILD
deleted file mode 100644
index 038999315..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/PKGBUILD
+++ /dev/null
@@ -1,60 +0,0 @@
-# U-Boot: ChiliBoard
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info>
-# Contributor: André Silva <emulatorman@hyperbola.info>
-
-pkgname=uboot4extlinux-chiliboard
-pkgver=2014.07
-pkgrel=3.1
-pkgdesc="U-Boot with Extlinux support for ChiliBoard"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-conflicts=('uboot-chiliboard' 'uboot4grub-chiliboard')
-makedepends=('bc')
-license=('GPL')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-kernel-add-support-for-gcc-7.patch'
- '0002-ARM-asm-io.h-use-static-inline.patch'
- '0003-common-main.c-make-show_boot_progress-__weak.patch'
- '0004-common-board_f-cosmetic-use-__weak-for-leds.patch'
- '0005-chiliboard-support.patch'
- '0006-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-sha256sums=('b4f83b8db325c21671a997198ec3a373e2e00dde2fcf17be9b9afd7cfd727f56'
- '9e80aa27cccdb07b03d56a970f247c91d586d0b936868c076c20acc2e68a3968'
- '91b2711f36fbe1bae5d02b3a1eec81383ffd50a4b71426b82920cfd70af40237'
- '0bb7ddee0b33ba7ca830f09b6aaacc945c7a662749a19b128eb1cab71f5b100a'
- '2795b55f0ef03aef6c05fd074ab9839d0f89fdc5a3c99dd849eb74cd09e59045'
- 'af804b3dd8167c61c79dfc831d34558cf8ce981dfea3df9da7f98acaee2a0edf'
- '1fca49c07c65708a1b167560c73af12d59d7e5da92794f47ecf2a27d4f765793'
- '5cdafa8abc97f1f7b9395b4f1d39494509d0f225f41bd8f030d6f31d549ba64f'
- '7882bc2f75089c83c0c3b0a22bfb5a10d3700545e600f616910bd6cdecc79237')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-kernel-add-support-for-gcc-7.patch
- patch -Np1 -i ../0002-ARM-asm-io.h-use-static-inline.patch
- patch -Np1 -i ../0003-common-main.c-make-show_boot_progress-__weak.patch
- patch -Np1 -i ../0004-common-board_f-cosmetic-use-__weak-for-leds.patch
- patch -Np1 -i ../0005-chiliboard-support.patch
- patch -Np1 -i ../0006-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- make distclean
- make chiliboard_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot4extlinux-chiliboard/extlinux.conf b/libre-testing/uboot4extlinux-chiliboard/extlinux.conf
deleted file mode 100644
index b29bec2d7..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/extlinux.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-timeout 50
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-label Parabola GNU/Linux-libre, linux-libre-lts kernel
- kernel /boot/vmlinuz-linux-libre-lts
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-lts
-
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
-label Parabola GNU/Linux-libre, linux-libre-pck kernel
- kernel /boot/vmlinuz-linux-libre-pck
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre-testing/uboot4extlinux-chiliboard/uEnv.txt b/libre-testing/uboot4extlinux-chiliboard/uEnv.txt
deleted file mode 100644
index a9f26096d..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=
diff --git a/libre-testing/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install b/libre-testing/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install
deleted file mode 100644
index 93306e01e..000000000
--- a/libre-testing/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install
+++ /dev/null
@@ -1,37 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-}
-
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-nitrogen6q/0001-parabola-arm-modifications.patch
deleted file mode 100644
index da61e010b..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,287 +0,0 @@
-diff -Nur u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a.orig/include/config_distro_bootcmd.h u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a/include/config_distro_bootcmd.h
---- u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a.orig/include/config_distro_bootcmd.h 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a/include/config_distro_bootcmd.h 2015-04-13 11:53:03.000000000 -0300
-@@ -0,0 +1,236 @@
-+/*
-+ * (C) Copyright 2014
-+ * NVIDIA Corporation <www.nvidia.com>
-+ *
-+ * Copyright 2014 Red Hat, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
-+#define _CONFIG_CMD_DISTRO_BOOTCMD_H
-+
-+/*
-+ * A note on error handling: It is possible for BOOT_TARGET_DEVICES to
-+ * reference a device that is not enabled in the U-Boot configuration, e.g.
-+ * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given
-+ * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor
-+ * at compile time, it's not possible to detect and report such problems via
-+ * a simple #ifdef/#error combination. Still, the code needs to report errors.
-+ * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to
-+ * reference a non-existent symbol, and have the name of that symbol encode
-+ * the error message. Consequently, this file contains references to e.g.
-+ * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the
-+ * prevalence of capitals here, this looks like a pre-processor macro and
-+ * hence seems like it should be all capitals, but it's really an error
-+ * message that includes some other pre-processor symbols in the text.
-+ */
-+
-+/* We need the part command */
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_PART
-+
-+#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
-+ "if " #devtypel " dev ${devnum}; then " \
-+ "setenv devtype " #devtypel "; " \
-+ "run scan_dev_for_boot_part; " \
-+ "fi\0"
-+
-+#define BOOTENV_SHARED_BLKDEV(devtypel) \
-+ #devtypel "_boot=" \
-+ BOOTENV_SHARED_BLKDEV_BODY(devtypel)
-+
-+#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \
-+ "bootcmd_" #devtypel #instance "=" \
-+ "setenv devnum " #instance "; " \
-+ "run " #devtypel "_boot\0"
-+
-+#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \
-+ #devtypel #instance " "
-+
-+#ifdef CONFIG_CMD_MMC
-+#define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc)
-+#define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_MMC
-+#define BOOTENV_DEV_MMC \
-+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
-+#define BOOTENV_DEV_NAME_MMC \
-+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
-+#endif
-+
-+#ifdef CONFIG_CMD_SATA
-+#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata)
-+#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_SATA
-+#define BOOTENV_DEV_SATA \
-+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
-+#define BOOTENV_DEV_NAME_SATA \
-+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
-+#endif
-+
-+#ifdef CONFIG_CMD_SCSI
-+#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
-+#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; "
-+#define BOOTENV_SHARED_SCSI \
-+ "scsi_init=" \
-+ "if ${scsi_need_init}; then " \
-+ "setenv scsi_need_init false; " \
-+ "scsi scan; " \
-+ "fi\0" \
-+ \
-+ "scsi_boot=" \
-+ BOOTENV_RUN_SCSI_INIT \
-+ BOOTENV_SHARED_BLKDEV_BODY(scsi)
-+#define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_RUN_SCSI_INIT
-+#define BOOTENV_SET_SCSI_NEED_INIT
-+#define BOOTENV_SHARED_SCSI
-+#define BOOTENV_DEV_SCSI \
-+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
-+#define BOOTENV_DEV_NAME_SCSI \
-+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
-+#endif
-+
-+#ifdef CONFIG_CMD_IDE
-+#define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide)
-+#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_IDE
-+#define BOOTENV_DEV_IDE \
-+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
-+#define BOOTENV_DEV_NAME_IDE \
-+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
-+#endif
-+
-+#ifdef CONFIG_CMD_USB
-+#define BOOTENV_RUN_USB_INIT "usb start; "
-+#define BOOTENV_SHARED_USB \
-+ "usb_boot=" \
-+ BOOTENV_RUN_USB_INIT \
-+ BOOTENV_SHARED_BLKDEV_BODY(usb)
-+#define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_RUN_USB_INIT
-+#define BOOTENV_SHARED_USB
-+#define BOOTENV_DEV_USB \
-+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
-+#define BOOTENV_DEV_NAME_USB \
-+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
-+#endif
-+
-+#if defined(CONFIG_CMD_DHCP)
-+#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
-+ "bootcmd_dhcp=" \
-+ BOOTENV_RUN_USB_INIT \
-+ "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
-+ "source ${scriptaddr}; " \
-+ "fi\0"
-+#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
-+ "dhcp "
-+#else
-+#define BOOTENV_DEV_DHCP \
-+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
-+#define BOOTENV_DEV_NAME_DHCP \
-+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
-+#endif
-+
-+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
-+#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
-+ "bootcmd_pxe=" \
-+ BOOTENV_RUN_USB_INIT \
-+ "dhcp; " \
-+ "if pxe get; then " \
-+ "pxe boot; " \
-+ "fi\0"
-+#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \
-+ "pxe "
-+#else
-+#define BOOTENV_DEV_PXE \
-+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
-+#define BOOTENV_DEV_NAME_PXE \
-+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
-+#endif
-+
-+#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \
-+ BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance)
-+#define BOOTENV_BOOT_TARGETS \
-+ "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
-+
-+#define BOOTENV_DEV(devtypeu, devtypel, instance) \
-+ BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
-+#define BOOTENV \
-+ BOOTENV_SHARED_MMC \
-+ BOOTENV_SHARED_USB \
-+ BOOTENV_SHARED_SATA \
-+ BOOTENV_SHARED_SCSI \
-+ BOOTENV_SHARED_IDE \
-+ "boot_prefixes=/ /boot/\0" \
-+ "boot_scripts=boot.scr.uimg boot.scr\0" \
-+ "boot_script_dhcp=boot.scr.uimg\0" \
-+ BOOTENV_BOOT_TARGETS \
-+ \
-+ "boot_extlinux=" \
-+ "sysboot ${devtype} ${devnum}:${bootpart} any " \
-+ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
-+ \
-+ "scan_dev_for_extlinux=" \
-+ "if test -e ${devtype} ${devnum}:${bootpart} " \
-+ "${prefix}extlinux/extlinux.conf; then " \
-+ "echo Found ${prefix}extlinux/extlinux.conf; " \
-+ "run boot_extlinux; " \
-+ "echo SCRIPT FAILED: continuing...; " \
-+ "fi\0" \
-+ \
-+ "boot_a_script=" \
-+ "load ${devtype} ${devnum}:${bootpart} " \
-+ "${scriptaddr} ${prefix}${script}; " \
-+ "source ${scriptaddr}\0" \
-+ \
-+ "scan_dev_for_scripts=" \
-+ "for script in ${boot_scripts}; do " \
-+ "if test -e ${devtype} ${devnum}:${bootpart} " \
-+ "${prefix}${script}; then " \
-+ "echo Found U-Boot script " \
-+ "${prefix}${script}; " \
-+ "run boot_a_script; " \
-+ "echo SCRIPT FAILED: continuing...; " \
-+ "fi; " \
-+ "done\0" \
-+ \
-+ "scan_dev_for_boot=" \
-+ "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \
-+ "for prefix in ${boot_prefixes}; do " \
-+ "run scan_dev_for_extlinux; " \
-+ "run scan_dev_for_scripts; " \
-+ "done\0" \
-+ \
-+ "scan_dev_for_boot_part=" \
-+ "part list ${devtype} ${devnum} -bootable devplist; " \
-+ "env exists devplist || setenv devplist 1; " \
-+ "for bootpart in ${devplist}; do " \
-+ "if fstype ${devtype} ${devnum}:${bootpart} " \
-+ "bootfstype; then " \
-+ "run scan_dev_for_boot; " \
-+ "fi; " \
-+ "done\0" \
-+ \
-+ BOOT_TARGET_DEVICES(BOOTENV_DEV) \
-+ \
-+ "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \
-+ "for target in ${boot_targets}; do " \
-+ "run bootcmd_${target}; " \
-+ "done\0"
-+
-+#ifndef CONFIG_BOOTCOMMAND
-+#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
-+#endif
-+
-+#endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */
-diff -Nur u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a.orig/include/configs/nitrogen6x.h u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a/include/configs/nitrogen6x.h
---- u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a.orig/include/configs/nitrogen6x.h 2015-05-20 19:13:03.000000000 -0300
-+++ u-boot-imx6-bb9dde563768731423fd6c560e95e1793a90710a/include/configs/nitrogen6x.h 2016-02-28 00:02:35.355409391 -0300
-@@ -82,6 +82,8 @@
- #define CONFIG_CMD_EXT4
- #define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-
- #ifdef CONFIG_MX6Q
- #define CONFIG_CMD_SATA
-@@ -195,8 +197,17 @@
- #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
- #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
-
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #if defined(CONFIG_SABRELITE)
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- "script=boot.scr\0" \
- "uimage=uImage\0" \
- "console=ttymxc1\0" \
-@@ -206,6 +217,8 @@
- "fdt_addr=0x18000000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
-+ "devtype=mmc\0" \
-+ "devnum=0\0" \
- "mmcdev=0\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-@@ -218,6 +231,7 @@
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
-+ "run scan_dev_for_boot;" \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/0002-kernel-add-support-for-gcc-7.patch b/libre-testing/uboot4extlinux-nitrogen6q/0002-kernel-add-support-for-gcc-7.patch
deleted file mode 100644
index ca59b159a..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/0002-kernel-add-support-for-gcc-7.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-diff --git a/include/linux/compiler-gcc7.h b/include/linux/compiler-gcc7.h
-new file mode 100644
-index 0000000..ba064fa
---- /dev/null
-+++ b/include/linux/compiler-gcc7.h
-@@ -0,0 +1,59 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc7.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#define KASAN_ABI_VERSION 4
---
-2.1.4
-
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/0003-ARM-asm-io.h-use-static-inline.patch b/libre-testing/uboot4extlinux-nitrogen6q/0003-ARM-asm-io.h-use-static-inline.patch
deleted file mode 100644
index 14ff6a5d8..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/0003-ARM-asm-io.h-use-static-inline.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 282ed8801c3e75e4c94943f56d399d630833591b Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Sun, 22 Jun 2014 23:10:39 +0200
-Subject: [PATCH 3/6] ARM:asm:io.h use static inline
-
-When compiling u-boot with W=1 the extern inline void for
-read* is likely causing the most noise. gcc / clang will
-warn there is never a actual declaration for these functions.
-Instead of declaring these extern make them static inline so
-it is actually declared.
-
-cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
----
- arch/arm/include/asm/io.h | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
-index 214f3ea..dc6138a 100644
---- a/arch/arm/include/asm/io.h
-+++ b/arch/arm/include/asm/io.h
-@@ -77,7 +77,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
- #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
- #define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v))
-
--extern inline void __raw_writesb(unsigned long addr, const void *data,
-+static inline void __raw_writesb(unsigned long addr, const void *data,
- int bytelen)
- {
- uint8_t *buf = (uint8_t *)data;
-@@ -85,7 +85,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
- __arch_putb(*buf++, addr);
- }
-
--extern inline void __raw_writesw(unsigned long addr, const void *data,
-+static inline void __raw_writesw(unsigned long addr, const void *data,
- int wordlen)
- {
- uint16_t *buf = (uint16_t *)data;
-@@ -93,7 +93,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
- __arch_putw(*buf++, addr);
- }
-
--extern inline void __raw_writesl(unsigned long addr, const void *data,
-+static inline void __raw_writesl(unsigned long addr, const void *data,
- int longlen)
- {
- uint32_t *buf = (uint32_t *)data;
-@@ -101,21 +101,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
- __arch_putl(*buf++, addr);
- }
-
--extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
-+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
- {
- uint8_t *buf = (uint8_t *)data;
- while(bytelen--)
- *buf++ = __arch_getb(addr);
- }
-
--extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
-+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
- {
- uint16_t *buf = (uint16_t *)data;
- while(wordlen--)
- *buf++ = __arch_getw(addr);
- }
-
--extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
-+static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
- {
- uint32_t *buf = (uint32_t *)data;
- while(longlen--)
---
-2.4.4
-
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/0004-common-main.c-make-show_boot_progress-__weak.patch b/libre-testing/uboot4extlinux-nitrogen6q/0004-common-main.c-make-show_boot_progress-__weak.patch
deleted file mode 100644
index 41b9c5cb2..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/0004-common-main.c-make-show_boot_progress-__weak.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 8158ac85f16963ff1d075255cd3f34b4f0614265 Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Thu, 26 Jun 2014 20:18:31 +0200
-Subject: [PATCH 4/6] common: main.c: make show_boot_progress __weak
-
-This not only looks a bit better it also prevents a
-warning with W=1 (no previous prototype).
-
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
-Acked-by: Simon Glass <sjg@chromium.org>
----
- common/main.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/common/main.c b/common/main.c
-index 32618f1..2979fbe 100644
---- a/common/main.c
-+++ b/common/main.c
-@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
- /*
- * Board-specific Platform code can reimplement show_boot_progress () if needed
- */
--void inline __show_boot_progress (int val) {}
--void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
-+__weak void show_boot_progress(int val) {}
-
- static void modem_init(void)
- {
---
-2.4.4
-
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/0005-common-board-use-__weak.patch b/libre-testing/uboot4extlinux-nitrogen6q/0005-common-board-use-__weak.patch
deleted file mode 100644
index 5cd77dbba..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/0005-common-board-use-__weak.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From deda59a4022fcedd781a893fe5e1bb495988858f Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Wed, 8 Oct 2014 22:57:22 +0200
-Subject: [PATCH 5/6] common: board: use __weak
-
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
----
- common/board_f.c | 10 ++--------
- common/board_r.c | 10 ++--------
- 2 files changed, 4 insertions(+), 16 deletions(-)
-
-diff --git a/common/board_f.c b/common/board_f.c
-index 4ea4cb2..215cc4a 100644
---- a/common/board_f.c
-+++ b/common/board_f.c
-@@ -130,14 +130,11 @@ int init_func_watchdog_reset(void)
- }
- #endif /* CONFIG_WATCHDOG */
-
--void __board_add_ram_info(int use_default)
-+__weak void board_add_ram_info(int use_default)
- {
- /* please define platform specific board_add_ram_info() */
- }
-
--void board_add_ram_info(int)
-- __attribute__ ((weak, alias("__board_add_ram_info")));
--
- static int init_baud_rate(void)
- {
- gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
-@@ -219,7 +216,7 @@ static int show_dram_config(void)
- return 0;
- }
-
--void __dram_init_banksize(void)
-+__weak void dram_init_banksize(void)
- {
- #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
- gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-@@ -227,9 +224,6 @@ void __dram_init_banksize(void)
- #endif
- }
-
--void dram_init_banksize(void)
-- __attribute__((weak, alias("__dram_init_banksize")));
--
- #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
- static int init_func_i2c(void)
- {
-diff --git a/common/board_r.c b/common/board_r.c
-index 602a239..fa4bd9c 100644
---- a/common/board_r.c
-+++ b/common/board_r.c
-@@ -60,7 +60,7 @@ DECLARE_GLOBAL_DATA_PTR;
-
- ulong monitor_flash_len;
-
--int __board_flash_wp_on(void)
-+__weak int board_flash_wp_on(void)
- {
- /*
- * Most flashes can't be detected when write protection is enabled,
-@@ -70,16 +70,10 @@ int __board_flash_wp_on(void)
- return 0;
- }
-
--int board_flash_wp_on(void)
-- __attribute__ ((weak, alias("__board_flash_wp_on")));
--
--void __cpu_secondary_init_r(void)
-+__weak void cpu_secondary_init_r(void)
- {
- }
-
--void cpu_secondary_init_r(void)
-- __attribute__ ((weak, alias("__cpu_secondary_init_r")));
--
- static int initr_secondary_cpu(void)
- {
- /*
---
-2.4.4
-
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/0006-common-board_f-cosmetic-use-__weak-for-leds.patch b/libre-testing/uboot4extlinux-nitrogen6q/0006-common-board_f-cosmetic-use-__weak-for-leds.patch
deleted file mode 100644
index bff38b486..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/0006-common-board_f-cosmetic-use-__weak-for-leds.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 137c23ed9e6ad2cba575842065bffa6e59170e17 Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Mon, 23 Jun 2014 23:20:19 +0200
-Subject: [PATCH 6/6] common: board_f: cosmetic use __weak for leds
-
-First of all this looks a lot better, but it also
-prevents a gcc warning (W=1), that the weak function
-has no previous prototype.
-
-cc: Simon Glass <sjg@chromium.org>
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
-Acked-by: Simon Glass <sjg@chromium.org>
----
- common/board_f.c | 29 ++++++++++-------------------
- include/status_led.h | 22 +++++++++++-----------
- 2 files changed, 21 insertions(+), 30 deletions(-)
-
-diff --git a/common/board_f.c b/common/board_f.c
-index 215cc4a..6e955bb 100644
---- a/common/board_f.c
-+++ b/common/board_f.c
-@@ -37,6 +37,7 @@
- #include <os.h>
- #include <post.h>
- #include <spi.h>
-+#include <status_led.h>
- #include <trace.h>
- #include <watchdog.h>
- #include <asm/errno.h>
-@@ -78,25 +79,15 @@ DECLARE_GLOBAL_DATA_PTR;
- ************************************************************************
- * May be supplied by boards if desired
- */
--inline void __coloured_LED_init(void) {}
--void coloured_LED_init(void)
-- __attribute__((weak, alias("__coloured_LED_init")));
--inline void __red_led_on(void) {}
--void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
--inline void __red_led_off(void) {}
--void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
--inline void __green_led_on(void) {}
--void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
--inline void __green_led_off(void) {}
--void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
--inline void __yellow_led_on(void) {}
--void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
--inline void __yellow_led_off(void) {}
--void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
--inline void __blue_led_on(void) {}
--void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
--inline void __blue_led_off(void) {}
--void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
-+__weak void coloured_LED_init(void) {}
-+__weak void red_led_on(void) {}
-+__weak void red_led_off(void) {}
-+__weak void green_led_on(void) {}
-+__weak void green_led_off(void) {}
-+__weak void yellow_led_on(void) {}
-+__weak void yellow_led_off(void) {}
-+__weak void blue_led_on(void) {}
-+__weak void blue_led_off(void) {}
-
- /*
- * Why is gd allocated a register? Prior to reloc it might be better to
-diff --git a/include/status_led.h b/include/status_led.h
-index 0eb91b8..b8aaaf7 100644
---- a/include/status_led.h
-+++ b/include/status_led.h
-@@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state);
- # include <asm/status_led.h>
- #endif
-
-+#endif /* CONFIG_STATUS_LED */
-+
- /*
- * Coloured LEDs API
- */
- #ifndef __ASSEMBLY__
--extern void coloured_LED_init (void);
--extern void red_led_on(void);
--extern void red_led_off(void);
--extern void green_led_on(void);
--extern void green_led_off(void);
--extern void yellow_led_on(void);
--extern void yellow_led_off(void);
--extern void blue_led_on(void);
--extern void blue_led_off(void);
-+void coloured_LED_init(void);
-+void red_led_on(void);
-+void red_led_off(void);
-+void green_led_on(void);
-+void green_led_off(void);
-+void yellow_led_on(void);
-+void yellow_led_off(void);
-+void blue_led_on(void);
-+void blue_led_off(void);
- #else
- .extern LED_init
- .extern red_led_on
-@@ -297,6 +299,4 @@ extern void blue_led_off(void);
- .extern blue_led_off
- #endif
-
--#endif /* CONFIG_STATUS_LED */
--
- #endif /* _STATUS_LED_H_ */
---
-2.4.4
-
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/PKGBUILD b/libre-testing/uboot4extlinux-nitrogen6q/PKGBUILD
deleted file mode 100644
index fb4e440ee..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/PKGBUILD
+++ /dev/null
@@ -1,62 +0,0 @@
-# U-Boot: Boundary Devices Nitrogen6X/Sabre Lite
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info>
-# Contributor: André Silva <emulatorman@hyperbola.info>
-
-pkgname=uboot4extlinux-nitrogen6q
-pkgver=2014.07
-pkgrel=3.1
-arch=('armv7h')
-pkgdesc="U-Boot with Extlinux support for Nitrogen6X/Sabre Lite"
-url="https://github.com/boundarydevices/u-boot-imx6/tree/production"
-license=('GPL')
-makedepends=('bc')
-conflicts=('uboot-nitrogen6q' 'uboot4grub-nitrogen6q')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-_commit=bb9dde563768731423fd6c560e95e1793a90710a
-source=("https://github.com/boundarydevices/u-boot-imx6/archive/${_commit}.tar.gz"
- '0001-parabola-arm-modifications.patch'
- '0002-kernel-add-support-for-gcc-7.patch'
- '0003-ARM-asm-io.h-use-static-inline.patch'
- '0004-common-main.c-make-show_boot_progress-__weak.patch'
- '0005-common-board-use-__weak.patch'
- '0006-common-board_f-cosmetic-use-__weak-for-leds.patch'
- 'extlinux.conf')
-sha256sums=('d06ad5e6b9adb84e7bfa99f8d5335ef06d48b351809e6f65e83a92c0e8a4d3ce'
- '1592a845ef7a229e5d370586edf344502f3ded5c24c853c790b600e8ef0128c7'
- '9e80aa27cccdb07b03d56a970f247c91d586d0b936868c076c20acc2e68a3968'
- '2fb98981885fbffba32fadb7b4a321e5540278c2a97f39b2700ad14c2ddb4d2a'
- '83f56e80b09d010a7d0f9cc18d4df43c7f100ee3a815421f2ccbf2c337ae5431'
- 'bb9f0bde66266998db0eae3204346364568bab963fe7be1086d633339652b70c'
- 'dd2d912d4e14dc7ea83fbe6148feecc65f104ae367292278f668cdfc11f947a5'
- '38db7f68084a5727a7c7cb101bb96c82f384b8ed4b14c3e1c2f9fcfc07ac164c')
-
-prepare() {
- cd u-boot-imx6-${_commit}
-
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-7.patch
- patch -Np1 -i ../0003-ARM-asm-io.h-use-static-inline.patch
- patch -Np1 -i ../0004-common-main.c-make-show_boot_progress-__weak.patch
- patch -Np1 -i ../0005-common-board-use-__weak.patch
- patch -Np1 -i ../0006-common-board_f-cosmetic-use-__weak-for-leds.patch
-}
-
-build() {
- cd u-boot-imx6-${_commit}
-
- unset CFLAGS
- unset CXXFLAGS
-
- make distclean
- make nitrogen6q_config
- make
-}
-
-package() {
- cd u-boot-imx6-${_commit}
-
- mkdir -p "${pkgdir}"/boot/extlinux
- cp u-boot.imx "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/extlinux.conf b/libre-testing/uboot4extlinux-nitrogen6q/extlinux.conf
deleted file mode 100644
index 7369fc759..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/extlinux.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-timeout 50
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre
-
-label Parabola GNU/Linux-libre, linux-libre-lts kernel
- kernel /boot/vmlinuz-linux-libre-lts
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre-lts
-
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
-label Parabola GNU/Linux-libre, linux-libre-pck kernel
- kernel /boot/vmlinuz-linux-libre-pck
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- append root=/dev/mmcblk0p2 rw console=ttymxc1
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre-testing/uboot4extlinux-nitrogen6q/uboot4extlinux-nitrogen6q.install b/libre-testing/uboot4extlinux-nitrogen6q/uboot4extlinux-nitrogen6q.install
deleted file mode 100644
index ed1fce75f..000000000
--- a/libre-testing/uboot4extlinux-nitrogen6q/uboot4extlinux-nitrogen6q.install
+++ /dev/null
@@ -1,11 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-post_install() {
- extlinux_warning
-}
-
-post_upgrade() {
- extlinux_warning
-}
diff --git a/libre-testing/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch
deleted file mode 100644
index c99cd89b8..000000000
--- a/libre-testing/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-diff -Nur u-boot-2016.01.orig/board/ti/beagle/beagle.c u-boot-2016.01/board/ti/beagle/beagle.c
---- u-boot-2016.01.orig/board/ti/beagle/beagle.c 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/board/ti/beagle/beagle.c 2016-02-24 19:45:05.779336247 -0300
-@@ -56,6 +56,7 @@
- #define BBTOYS_WIFI 0x01000B00
- #define BBTOYS_VGA 0x02000B00
- #define BBTOYS_LCD 0x03000B00
-+#define BBTOYS_ULCD 0x04000B00
- #define BCT_BRETTL3 0x01000F00
- #define BCT_BRETTL4 0x02000F00
- #define LSR_COM6L_ADPT 0x01001300
-@@ -211,25 +212,25 @@
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
--static unsigned int get_expansion_id(void)
-+static unsigned int get_expansion_id(int eeprom_address)
- {
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-+ if (i2c_probe(eeprom_address) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
- sizeof(expansion_config));
- }
-
-@@ -341,15 +342,18 @@
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -390,7 +394,7 @@
- generate_fake_mac = true;
- }
-
-- switch (get_expansion_id()) {
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
-@@ -471,6 +475,30 @@
- }
-
- if (expansion_config.content == 1)
-+ setenv(expansion_config.env_var, expansion_config.env_setting);
-+
-+ /* Scan 0x51 as well for loop-thru boards */
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
-+ case BBTOYS_ULCD:
-+ printf("Recognized BeagleBoardToys uLCD-lite board\n");
-+ setenv("buddy2", "bbtoys-ulcd");
-+ setenv("defaultdisplay", "dvi");
-+ setenv("dvimode", "800x480MR-16@60");
-+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
-+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
-+ setenv("kmsmode", "video=DVI-D-1:800x480");
-+ break;
-+ case BEAGLE_NO_EEPROM:
-+ printf("No EEPROM on expansion board\n");
-+ setenv("buddy2", "none");
-+ break;
-+ default:
-+ printf("Unrecognized expansion board: %x\n",
-+ expansion_config.device_vendor);
-+ setenv("buddy2", "unknown");
-+ }
-+
-+ if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
-
- twl4030_power_init();
-diff -Nur u-boot-2016.01.orig/include/configs/omap3_beagle.h u-boot-2016.01/include/configs/omap3_beagle.h
---- u-boot-2016.01.orig/include/configs/omap3_beagle.h 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/include/configs/omap3_beagle.h 2016-02-24 19:50:25.959802093 -0300
-@@ -91,6 +91,12 @@
- #define CONFIG_USB_ETHER_MCS7830
- #define CONFIG_USB_ETHER_SMSC95XX
-
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /* GPIO banks */
- #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
- #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-@@ -124,51 +130,71 @@
- #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
- /* devices */
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "rdaddr=0x81000000\0" \
-+ BOOTENV \
-+ "loadaddr=0x82000000\0" \
-+ "rdaddr=0x88080000\0" \
- "fdt_high=0xffffffff\0" \
-- "fdtaddr=0x80f80000\0" \
-- "usbtty=cdc_acm\0" \
-- "bootfile=uImage\0" \
-- "ramdisk=ramdisk.gz\0" \
-- "bootdir=/boot\0" \
-- "bootpart=0:2\0" \
-+ "fdtaddr=0x88000000\0" \
- "console=ttyO2,115200n8\0" \
-- "mpurate=auto\0" \
-- "buddy=none\0" \
-- "optargs=\0" \
-- "camera=none\0" \
-- "vram=12M\0" \
-- "dvimode=640x480MR-16@60\0" \
-- "defaultdisplay=dvi\0" \
-+ "fdtfile=undefined\0" \
-+ "bootpart=0:1\0" \
-+ "bootdir=\0" \
-+ "fdtdir=/dtbs\0" \
-+ "bootfile=zImage\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext3 rootwait\0" \
-- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
-- "nandrootfstype=ubifs\0" \
-- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-- "ramrootfstype=ext2\0" \
-+ "optargs=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "nandargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${nandroot} " \
-- "rootfstype=${nandrootfstype}\0" \
-+ "root=${root} " \
-+ "${musb} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
-+ "part uuid ${devtype} ${rootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "findfdt=" \
- "if test $beaglerev = AxBx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
-@@ -181,81 +207,11 @@
- "if test $beaglerev = xMC; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "validatefdt=" \
-- "if test $beaglerev = xMAB; then " \
-- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; " \
-- "fi; " \
-- "fi; \0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "bootm ${loadaddr}\0" \
-- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
-- "run mmcargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "nandboot=echo Booting from nand ...; " \
-- "run nandargs; " \
-- "nand read ${loadaddr} 280000 400000; " \
-- "bootm ${loadaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootm ${loadaddr}\0" \
-- "userbutton=if gpio input 173; then run userbutton_xm; " \
-- "else run userbutton_nonxm; fi;\0" \
-- "userbutton_xm=gpio input 4;\0" \
-- "userbutton_nonxm=gpio input 7;\0"
--/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-+ "echo WARNING: Could not determine device tree to use; fi; \0"
-+
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run userbutton; then " \
-- "setenv bootenv uEnv.txt;" \
-- "else " \
-- "setenv bootenv user.txt;" \
-- "fi;" \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot;" \
-- "fi;" \
-- "fi; " \
-- "fi;" \
-- "run nandboot;" \
-- "setenv bootfile zImage;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcbootz; " \
-- "fi; " \
-+ "run mmcboot"
-
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
diff --git a/libre-testing/uboot4extlinux-omap3_beagle/0002-kernel-add-support-for-gcc-7.patch b/libre-testing/uboot4extlinux-omap3_beagle/0002-kernel-add-support-for-gcc-7.patch
deleted file mode 100644
index ca59b159a..000000000
--- a/libre-testing/uboot4extlinux-omap3_beagle/0002-kernel-add-support-for-gcc-7.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-diff --git a/include/linux/compiler-gcc7.h b/include/linux/compiler-gcc7.h
-new file mode 100644
-index 0000000..ba064fa
---- /dev/null
-+++ b/include/linux/compiler-gcc7.h
-@@ -0,0 +1,59 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc7.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#define KASAN_ABI_VERSION 4
---
-2.1.4
-
diff --git a/libre-testing/uboot4extlinux-omap3_beagle/PKGBUILD b/libre-testing/uboot4extlinux-omap3_beagle/PKGBUILD
deleted file mode 100644
index 9019ef4f7..000000000
--- a/libre-testing/uboot4extlinux-omap3_beagle/PKGBUILD
+++ /dev/null
@@ -1,48 +0,0 @@
-# U-Boot: BeagleBoard and BeagleBoard-xM
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info>
-# Contributor: André Silva <emulatorman@hyperbola.info>
-
-pkgname=uboot4extlinux-omap3_beagle
-pkgver=2016.01
-pkgrel=4.1
-pkgdesc="U-Boot with Extlinux support for BeagleBoard and BeagleBoard-xM"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-conflicts=('uboot-omap3_beagle' 'uboot4grub-omap3_beagle')
-makedepends=('bc')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- '0002-kernel-add-support-for-gcc-7.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-sha256sums=('e5792fba9399d9804aa2ef667f14ff771e2cdece72367d340250265bf095a5d5'
- 'cf6519bab4270bf093eb6ff0d9f3b4d314d00af6c4ecad07c492977ae5c7f510'
- '9e80aa27cccdb07b03d56a970f247c91d586d0b936868c076c20acc2e68a3968'
- 'bb489334db2d44562caa18ed6297068cf7df3afdf1bb8b1b1f27bce0d2b8e987'
- 'e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-7.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS CFLAGS CXXFLAGS
-
- make distclean
- make omap3_beagle_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot4extlinux-omap3_beagle/extlinux.conf b/libre-testing/uboot4extlinux-omap3_beagle/extlinux.conf
deleted file mode 100644
index bb48ab97f..000000000
--- a/libre-testing/uboot4extlinux-omap3_beagle/extlinux.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-timeout 50
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-label Parabola GNU/Linux-libre, linux-libre-lts kernel
- kernel /boot/vmlinuz-linux-libre-lts
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-lts
-
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
-label Parabola GNU/Linux-libre, linux-libre-pck kernel
- kernel /boot/vmlinuz-linux-libre-pck
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre-testing/uboot4extlinux-omap3_beagle/uEnv.txt b/libre-testing/uboot4extlinux-omap3_beagle/uEnv.txt
deleted file mode 100644
index e69de29bb..000000000
--- a/libre-testing/uboot4extlinux-omap3_beagle/uEnv.txt
+++ /dev/null
diff --git a/libre-testing/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install b/libre-testing/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install
deleted file mode 100644
index ed1fce75f..000000000
--- a/libre-testing/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install
+++ /dev/null
@@ -1,11 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-post_install() {
- extlinux_warning
-}
-
-post_upgrade() {
- extlinux_warning
-}
diff --git a/libre-testing/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 6f8666775..000000000
--- a/libre-testing/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig
-index 8d9024854..3d7ffc39c 100644
---- a/configs/omap4_panda_defconfig
-+++ b/configs/omap4_panda_defconfig
-@@ -10,6 +10,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
- CONFIG_VERSION_VARIABLE=y
- CONFIG_SPL=y
- CONFIG_SPL_OS_BOOT=y
-+CONFIG_AUTOBOOT_KEYED=y
-+CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
-+CONFIG_AUTOBOOT_DELAY_STR="d"
-+CONFIG_AUTOBOOT_STOP_STR=" "
- # CONFIG_CMD_IMLS is not set
- CONFIG_CMD_ASKENV=y
- # CONFIG_CMD_FLASH is not set
-@@ -20,8 +24,8 @@ CONFIG_CMD_USB=y
- CONFIG_CMD_GPIO=y
- # CONFIG_CMD_SETEXPR is not set
- # CONFIG_CMD_NFS is not set
--CONFIG_CMD_EXT4_WRITE=y
- CONFIG_SYS_NS16550=y
- CONFIG_USB=y
- CONFIG_USB_STORAGE=y
- CONFIG_OF_LIBFDT=y
-+CONFIG_IDENT_STRING=" Parabola GNU/Linux-libre"
-diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
-index 8e0f9eb96..a2eb1f9ff 100644
---- a/include/configs/ti_omap4_common.h
-+++ b/include/configs/ti_omap4_common.h
-@@ -42,7 +42,7 @@
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method. Default to the static timing infomation.
- */
--#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-+/*#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS*/
- #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
- #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-@@ -74,6 +74,12 @@
- #define CONFIG_USB_DEVICE 1
- #define CONFIG_USB_TTY 1
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- /*
- * Environment setup
- */
-@@ -91,9 +97,8 @@
-
- #define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
-- func(LEGACY_MMC, legacy_mmc, 0) \
- func(MMC, mmc, 1) \
-- func(LEGACY_MMC, legacy_mmc, 1) \
-+ func(USB, usb, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-
diff --git a/libre-testing/uboot4extlinux-omap4_panda/PKGBUILD b/libre-testing/uboot4extlinux-omap4_panda/PKGBUILD
deleted file mode 100644
index edfd4f48d..000000000
--- a/libre-testing/uboot4extlinux-omap4_panda/PKGBUILD
+++ /dev/null
@@ -1,47 +0,0 @@
-# U-Boot: PandaBoard and PandaBoard ES
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info>
-# Contributor: André Silva <emulatorman@hyperbola.info>
-
-pkgname=uboot4extlinux-omap4_panda
-pkgver=2017.01
-pkgrel=1.1
-pkgdesc="U-Boot with Extlinux support for PandaBoard and PandaBoard ES"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-conflicts=('uboot-omap4_panda' 'uboot4grub-omap4_panda')
-makedepends=('bc')
-license=('GPL')
-install=${pkgname}.install
-backup=('boot/extlinux/extlinux.conf' 'boot/uEnv.txt')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-sha256sums=('6c425175f93a4bcf2ec9faf5658ef279633dbd7856a293d95bd1ff516528ecf2'
- 'dbdfef11ac6ef81add6a7d5983e715538583738561409e35de393a0bc2185772'
- 'bb489334db2d44562caa18ed6297068cf7df3afdf1bb8b1b1f27bce0d2b8e987'
- '79c60872095fb4a421a532ce918ffb0927398a83df028578aebf46f54a4d6ed6')
-
-prepare() {
- cd u-boot-${pkgver}
-
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS
-
- make distclean
- make omap4_panda_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
-
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot4extlinux-omap4_panda/extlinux.conf b/libre-testing/uboot4extlinux-omap4_panda/extlinux.conf
deleted file mode 100644
index bb48ab97f..000000000
--- a/libre-testing/uboot4extlinux-omap4_panda/extlinux.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-timeout 50
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-label Parabola GNU/Linux-libre, linux-libre-lts kernel
- kernel /boot/vmlinuz-linux-libre-lts
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-lts
-
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
-label Parabola GNU/Linux-libre, linux-libre-pck kernel
- kernel /boot/vmlinuz-linux-libre-pck
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre-testing/uboot4extlinux-omap4_panda/uEnv.txt b/libre-testing/uboot4extlinux-omap4_panda/uEnv.txt
deleted file mode 100644
index 55298e1a9..000000000
--- a/libre-testing/uboot4extlinux-omap4_panda/uEnv.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-# Uncomment and add any additional kernel parameters to optargs
-#optargs=
diff --git a/libre-testing/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install b/libre-testing/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install
deleted file mode 100644
index defbc061d..000000000
--- a/libre-testing/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install
+++ /dev/null
@@ -1,26 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 1538e9636..000000000
--- a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,164 +0,0 @@
-diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig
-index a4a17c161..88a863337 100644
---- a/configs/udoo_defconfig
-+++ b/configs/udoo_defconfig
-@@ -30,3 +30,4 @@ CONFIG_CMD_FS_GENERIC=y
- CONFIG_DM=y
- CONFIG_DM_THERMAL=y
- CONFIG_OF_LIBFDT=y
-+CONFIG_IDENT_STRING=" Parabola GNU/Linux-libre"
-diff --git a/include/configs/udoo.h b/include/configs/udoo.h
-index 0a7767c20..543993731 100644
---- a/include/configs/udoo.h
-+++ b/include/configs/udoo.h
-@@ -51,6 +51,9 @@
-
- /* Command definition */
- #define CONFIG_CMD_BMODE
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_PART
-+#define CONFIG_SUPPORT_RAW_INITRD
-
- #define CONFIG_SYS_MEMTEST_START 0x10000000
- #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-@@ -60,8 +63,13 @@
-
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "script=boot.scr\0" \
- "image=zImage\0" \
- "console=ttymxc1\0" \
- "splashpos=m,m\0" \
-@@ -69,47 +77,54 @@
- "initrd_high=0xffffffff\0" \
- "fdt_file=undefined\0" \
- "fdt_addr=0x18000000\0" \
-- "boot_fdt=try\0" \
-+ "rdaddr=0x12A00000\0" \
-+ "rdfile=initramfs-linux.img\0" \
-+ "optargs=\0" \
-+ "video=\0" \
- "ip_dyn=yes\0" \
-+ "devtype=mmc\0" \
-+ "devnum=0\0" \
- "mmcdev=0\0" \
- "mmcpart=1\0" \
-- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-- "update_sd_firmware_filename=u-boot.imx\0" \
-- "update_sd_firmware=" \
-- "if test ${ip_dyn} = yes; then " \
-- "setenv get_cmd dhcp; " \
-- "else " \
-- "setenv get_cmd tftp; " \
-- "fi; " \
-- "if mmc dev ${mmcdev}; then " \
-- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
-- "setexpr fw_sz ${filesize} / 0x200; " \
-- "setexpr fw_sz ${fw_sz} + 1; " \
-- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-- "fi; " \
-- "fi\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
-- "root=${mmcroot}\0" \
-- "loadbootscript=" \
-- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-- "bootscript=echo Running bootscript from mmc ...; " \
-- "source\0" \
-- "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-+ "${optargs} " \
-+ "root=${root} " \
-+ "video=${video}\0" \
-+ "loadimage=echo Loading /boot/${image}..; load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \
-+ "loadfdt=echo Loading /boot/dtbs/${fdt_file}..; load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/dtbs/${fdt_file}\0" \
-+ "loadrd=load mmc ${bootpart} ${rdaddr} /boot/${rdfile}\0" \
-+ "mmcboot=mmc dev ${mmcdev}; " \
-+ "if mmc rescan; then " \
-+ "echo SD/MMC found on device ${mmcdev};" \
-+ "setenv bootpart ${mmcdev}:1; " \
-+ "part uuid mmc ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
- "fi; " \
-- "else " \
-- "bootz; " \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "if run loadfdt; then " \
-+ "run mmcargs;" \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdt_addr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdt_addr};" \
-+ "fi;" \
-+ "else " \
-+ "echo Kernel found, but no device tree found;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
-@@ -135,26 +150,17 @@
- "else " \
- "bootz; " \
- "fi;\0" \
-- "findfdt=" \
-- "if test $board_rev = MX6Q ; then " \
-- "setenv fdt_file imx6q-udoo.dtb; fi; " \
-- "if test $board_rev = MX6DL ; then " \
-- "setenv fdt_file imx6dl-udoo.dtb; fi; " \
-- "if test $fdt_file = undefined; then " \
-- "echo WARNING: Could not determine dtb to use; fi; \0"
-+ "findfdt=" \
-+ "if test $board_rev = MX6Q ; then " \
-+ "setenv fdt_file imx6q-udoo.dtb; fi; " \
-+ "if test $board_rev = MX6DL ; then " \
-+ "setenv fdt_file imx6dl-udoo.dtb; fi; " \
-+ "if test $fdt_file = undefined; then " \
-+ "echo WARNING: Could not determine dtb to use; fi; \0"
-
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot; " \
-- "else run netboot; " \
-- "fi; " \
-- "fi; " \
-- "else run netboot; fi"
-+ "run mmcboot; "
-
- /* Print Buffer Size */
- #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-7.patch b/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-7.patch
deleted file mode 100644
index ca59b159a..000000000
--- a/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-7.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-diff --git a/include/linux/compiler-gcc7.h b/include/linux/compiler-gcc7.h
-new file mode 100644
-index 0000000..ba064fa
---- /dev/null
-+++ b/include/linux/compiler-gcc7.h
-@@ -0,0 +1,59 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc7.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#define KASAN_ABI_VERSION 4
---
-2.1.4
-
diff --git a/libre-testing/uboot4extlinux-udoo/PKGBUILD b/libre-testing/uboot4extlinux-udoo/PKGBUILD
deleted file mode 100644
index 532ea1c4c..000000000
--- a/libre-testing/uboot4extlinux-udoo/PKGBUILD
+++ /dev/null
@@ -1,49 +0,0 @@
-# U-Boot: UDOO
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info>
-# Contributor: André Silva <emulatorman@hyperbola.info>
-
-pkgname=uboot4extlinux-udoo
-pkgver=2016.11
-pkgrel=1.1
-pkgdesc="U-Boot with Extlinux support for UDOO Dual and Quad"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-conflicts=('uboot-udoo' 'uboot4grub-udoo')
-replaces=('uboot4extlinux-udoo_dl' 'uboot4extlinux-udoo_quad')
-license=('GPL')
-makedepends=('bc' 'swig')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver/rc/-rc}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- '0002-kernel-add-support-for-gcc-7.patch'
- 'extlinux.conf')
-sha256sums=('45813e6565dcc0436abe6752624324cdbf5f3ac106570d76d32b46ec529bcdc8'
- '5a93f489208f0f2e9415779770827024e24ca717438c0998499b59b59cd6189d'
- '9e80aa27cccdb07b03d56a970f247c91d586d0b936868c076c20acc2e68a3968'
- '7398bad545ed40e7809badc2ef0211796402187c1e307e7bd86972624ce4e1bb')
-
-prepare() {
- cd u-boot-${pkgver/rc/-rc}
-
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-7.patch
-}
-
-build() {
- cd u-boot-${pkgver/rc/-rc}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- make distclean
- make udoo_defconfig
- make EXTRAVERSION=-${pkgrel}
-}
-
-package_uboot4extlinux-udoo() {
- cd u-boot-${pkgver/rc/-rc}
-
- mkdir -p "${pkgdir}"/boot/extlinux
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
- cp SPL u-boot.img "${pkgdir}"/boot
-}
diff --git a/libre-testing/uboot4extlinux-udoo/extlinux.conf b/libre-testing/uboot4extlinux-udoo/extlinux.conf
deleted file mode 100644
index 918a679d6..000000000
--- a/libre-testing/uboot4extlinux-udoo/extlinux.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-timeout 50
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre
-
-label Parabola GNU/Linux-libre, linux-libre-lts kernel
- kernel /boot/vmlinuz-linux-libre-lts
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre-lts
-
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
-label Parabola GNU/Linux-libre, linux-libre-pck kernel
- kernel /boot/vmlinuz-linux-libre-pck
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install b/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install
deleted file mode 100644
index 907a8e9f1..000000000
--- a/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install
+++ /dev/null
@@ -1,27 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do you want to do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k
- dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k
- sync
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k"
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre-testing/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch
deleted file mode 100644
index c50ca9e00..000000000
--- a/libre-testing/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-diff -Nur u-boot-2015.10.orig/include/configs/mx6_common.h u-boot-2015.10/include/configs/mx6_common.h
---- u-boot-2015.10.orig/include/configs/mx6_common.h 2015-10-19 20:59:38.000000000 -0300
-+++ u-boot-2015.10/include/configs/mx6_common.h 2016-02-26 20:52:16.196805960 -0300
-@@ -68,7 +68,7 @@
- #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
- #ifndef CONFIG_BOOTDELAY
--#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTDELAY 1
- #endif
-
- /* allow to overwrite serial and ethaddr */
-@@ -82,6 +82,8 @@
- #define CONFIG_SUPPORT_RAW_INITRD
- #define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_EXT4
- #define CONFIG_CMD_EXT4_WRITE
-diff -Nur u-boot-2015.10.orig/include/configs/wandboard.h u-boot-2015.10/include/configs/wandboard.h
---- u-boot-2015.10.orig/include/configs/wandboard.h 2015-10-19 20:59:38.000000000 -0300
-+++ u-boot-2015.10/include/configs/wandboard.h 2016-02-26 20:55:20.041265918 -0300
-@@ -86,19 +86,33 @@
- #define CONFIG_IMX_HDMI
- #define CONFIG_IMX_VIDEO_SKIP
-
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- "script=boot.scr\0" \
- "image=zImage\0" \
-+ "bootdir=/boot\0" \
- "console=ttymxc0\0" \
- "splashpos=m,m\0" \
- "fdtfile=undefined\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_addr=0x18000000\0" \
-+ "rdaddr=0x12A00000\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "boot_fdt=try\0" \
-+ "optargs=\0" \
- "ip_dyn=yes\0" \
-- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-+ "mmcdev=0\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
- "update_sd_firmware_filename=u-boot.imx\0" \
-@@ -116,7 +130,9 @@
- "fi; " \
- "fi\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
-- "root=${mmcroot}; run videoargs\0" \
-+ "${optargs} " \
-+ "root=${root} " \
-+ "video=${video}\0" \
- "videoargs=" \
- "setenv nextcon 0; " \
- "if hdmidet; then " \
-@@ -143,27 +159,44 @@
- "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
- "fi; " \
- "setenv bootargs ${bootargs} ${fbmem}\0" \
-- "loadbootscript=" \
-- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-- "bootscript=echo Running bootscript from mmc ...; " \
-- "source\0" \
-- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${image}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdt_addr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdt_addr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdt_addr};" \
-+ "fi;" \
-+ "fi;" \
- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-@@ -202,16 +235,7 @@
-
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot; " \
-- "else run netboot; " \
-- "fi; " \
-- "fi; " \
-- "else run netboot; fi"
-+ "run mmcboot;"
-
- /* Physical Memory Map */
- #define CONFIG_NR_DRAM_BANKS 1
diff --git a/libre-testing/uboot4extlinux-wandboard/0002-kernel-add-support-for-gcc-7.patch b/libre-testing/uboot4extlinux-wandboard/0002-kernel-add-support-for-gcc-7.patch
deleted file mode 100644
index ca59b159a..000000000
--- a/libre-testing/uboot4extlinux-wandboard/0002-kernel-add-support-for-gcc-7.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-diff --git a/include/linux/compiler-gcc7.h b/include/linux/compiler-gcc7.h
-new file mode 100644
-index 0000000..ba064fa
---- /dev/null
-+++ b/include/linux/compiler-gcc7.h
-@@ -0,0 +1,59 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc7.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#define KASAN_ABI_VERSION 4
---
-2.1.4
-
diff --git a/libre-testing/uboot4extlinux-wandboard/PKGBUILD b/libre-testing/uboot4extlinux-wandboard/PKGBUILD
deleted file mode 100644
index 2d9fd9911..000000000
--- a/libre-testing/uboot4extlinux-wandboard/PKGBUILD
+++ /dev/null
@@ -1,46 +0,0 @@
-# U-Boot: Wandboard
-# Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info>
-# Contributor: André Silva <emulatorman@hyperbola.info>
-
-pkgname=uboot4extlinux-wandboard
-pkgver=2015.10
-pkgrel=4.1
-pkgdesc="U-Boot with Extlinux support for Wandboard"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-makedepends=('bc')
-conflicts=('uboot-wandboard' 'uboot4grub-wandboard')
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- '0002-kernel-add-support-for-gcc-7.patch'
- 'extlinux.conf')
-sha256sums=('bdc68d5f9455ad933b059c735d983f2c8b6b552dafb062e5ff1444f623021955'
- 'a49c942b3cd676ce3550d0f2cdb80086b5df0f74c669b11ba2420ebfc878dc8c'
- '9e80aa27cccdb07b03d56a970f247c91d586d0b936868c076c20acc2e68a3968'
- '6423fe8e131298f9827fecd48da5859bc876c27c7ed1e11bf95844f258c04626')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-7.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS
-
- make distclean
- make wandboard_defconfig
- make
-}
-
-package() {
- cd u-boot-${pkgver}
-
- mkdir -p "${pkgdir}"/boot/extlinux
- cp SPL u-boot.img "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot4extlinux-wandboard/extlinux.conf b/libre-testing/uboot4extlinux-wandboard/extlinux.conf
deleted file mode 100644
index 9ab822b7e..000000000
--- a/libre-testing/uboot4extlinux-wandboard/extlinux.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-timeout 50
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre
-
-label Parabola GNU/Linux-libre, linux-libre-lts kernel
- kernel /boot/vmlinuz-linux-libre-lts
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre-lts
-
-label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
- kernel /boot/vmlinuz-linux-libre-lts-knock
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre-lts-knock
-
-label Parabola GNU/Linux-libre, linux-libre-hardened kernel
- kernel /boot/vmlinuz-linux-libre-hardened
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre-hardened
-
-label Parabola GNU/Linux-libre, linux-libre-lts-apparmor kernel
- kernel /boot/vmlinuz-linux-libre-lts-apparmor
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre-lts-apparmor
-
-label Parabola GNU/Linux-libre, linux-libre-pck kernel
- kernel /boot/vmlinuz-linux-libre-pck
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre-pck
-
-label Parabola GNU/Linux-libre, linux-libre-rt kernel
- kernel /boot/vmlinuz-linux-libre-rt
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre-rt
-
-label Parabola GNU/Linux-libre, linux-libre-xtreme kernel
- kernel /boot/vmlinuz-linux-libre-xtreme
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre-xtreme
diff --git a/libre-testing/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install b/libre-testing/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install
deleted file mode 100644
index 65196758e..000000000
--- a/libre-testing/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install
+++ /dev/null
@@ -1,26 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k
- dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k"
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre-testing/uboot4grub-am335x_bone/0001-parabola-arm-modifications+grub-support.patch b/libre-testing/uboot4grub-am335x_bone/0001-parabola-arm-modifications+grub-support.patch
deleted file mode 100644
index 1bd59b27c..000000000
--- a/libre-testing/uboot4grub-am335x_bone/0001-parabola-arm-modifications+grub-support.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig
---- u-boot-2015.04.orig/configs/am335x_evm_defconfig 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/configs/am335x_evm_defconfig 2016-02-25 17:57:49.957330489 -0300
-@@ -1,7 +1,6 @@
- CONFIG_SPL=y
- CONFIG_SPL_STACK_R=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
--CONFIG_SYS_EXTRA_OPTIONS="NAND"
--CONFIG_CONS_INDEX=1
-+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
- CONFIG_ARM=y
- CONFIG_TARGET_AM335X_EVM=y
-diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h
---- u-boot-2015.04.orig/include/configs/am335x_evm.h 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/include/configs/am335x_evm.h 2016-02-25 18:03:59.944875290 -0300
-@@ -17,6 +17,7 @@
- #define __CONFIG_AM335X_EVM_H
-
- #include <configs/ti_am335x_common.h>
-+#define CONFIG_ENV_IS_NOWHERE
-
- #ifndef CONFIG_SPL_BUILD
- #ifndef CONFIG_FIT
-@@ -45,6 +46,13 @@
- /* Enhance our eMMC support / experience. */
- #define CONFIG_CMD_GPT
- #define CONFIG_EFI_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_SETEXPR
-+
-+/* GRUB support */
-+#define CONFIG_API
-+#define CONFIG_SYS_MMC_MAX_DEVICE 2 /* Max number of 'hosts'/controllers */
-
- #ifdef CONFIG_NAND
- #define NANDARGS \
-@@ -70,110 +78,81 @@
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
-- "boot_fdt=try\0" \
-- "bootpart=0:2\0" \
-+ "bootpart=0:1\0" \
- "bootdir=/boot\0" \
-- "bootfile=zImage\0" \
-+ "fdtdir=/boot/dtbs\0" \
-+ "bootfile=grub/arm-uboot/core.img\0" \
- "fdtfile=undefined\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "console=ttyO0,115200n8\0" \
- "partitions=" \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- "optargs=\0" \
-- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 ro\0" \
-- "mmcrootfstype=ext4 rootwait\0" \
-- "rootpath=/export/rootfs\0" \
-- "nfsopts=nolock\0" \
-- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-- "::off\0" \
-- "ramroot=/dev/ram0 rw\0" \
-- "ramrootfstype=ext2\0" \
-+ "cape_disable=\0" \
-+ "cape_enable=\0" \
-+ "cmdline=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "spiroot=/dev/mtdblock4 rw\0" \
-- "spirootfstype=jffs2\0" \
-- "spisrcaddr=0xe0000\0" \
-- "spiimgsize=0x362000\0" \
-- "spibusno=0\0" \
-- "spiargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${spiroot} " \
-- "rootfstype=${spirootfstype}\0" \
-- "netargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=/dev/nfs " \
-- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-- "ip=dhcp\0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcloados=run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdtaddr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-- "mmcboot=mmc dev ${mmcdev}; " \
-- "if mmc rescan; then " \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootscript; then " \
-- "run bootscript;" \
-- "else " \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "root=${root} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "for devnum in 0 1; do " \
-+ "if ${devtype} dev ${devnum}; then " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "gpio set 54;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "if test -n ${cape}; then " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
-+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+ "fi; " \
-+ "echo using: $fdtfile...; " \
-+ "fi; " \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "gpio set 55;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "gpio set 56;" \
-+ "bootm;" \
-+ "if run loadfdt; then " \
-+ "gpio set 57;" \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No GRUB found;" \
-+ "fi;" \
-+ "gpio clear 54; gpio clear 55;" \
-+ "setexpr devnum ${devnum} + 1;" \
- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadimage; then " \
-- "run mmcloados;" \
-- "fi;" \
-- "fi ;" \
-- "fi;\0" \
-- "spiboot=echo Booting from spi ...; " \
-- "run spiargs; " \
-- "sf probe ${spibusno}:0; " \
-- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
-- "bootz ${loadaddr}\0" \
-- "netboot=echo Booting from network ...; " \
-- "setenv autoload no; " \
-- "dhcp; " \
-- "tftp ${loadaddr} ${bootfile}; " \
-- "tftp ${fdtaddr} ${fdtfile}; " \
-- "run netargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+ "done;" \
-+ "done;\0" \
- "findfdt="\
- "if test $board_name = A335BONE; then " \
-- "setenv fdtfile am335x-bone.dtb; fi; " \
-+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
- "if test $board_name = A335BNLT; then " \
-- "setenv fdtfile am335x-boneblack.dtb; fi; " \
-+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \
- "if test $board_name = A33515BB; then " \
- "setenv fdtfile am335x-evm.dtb; fi; " \
- "if test $board_name = A335X_SK; then " \
-@@ -185,12 +164,12 @@
- #endif
-
- #define CONFIG_BOOTCOMMAND \
-- "run findfdt; " \
-- "run mmcboot;" \
-- "setenv mmcdev 1; " \
-- "setenv bootpart 1:2; " \
-+ "gpio set 53;" \
-+ "run findfdt;" \
- "run mmcboot;" \
-- "run nandboot;"
-+ "gpio clear 54; gpio clear 55;" \
-+ "gpio set 56;" \
-+ "gpio set 57"
-
- /* NS16550 Configuration */
- #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-@@ -329,9 +308,8 @@
- #endif
-
- #ifdef CONFIG_MUSB_GADGET
--#define CONFIG_USB_ETHER
--#define CONFIG_USB_ETH_RNDIS
--#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-+#define CONFIG_CMD_USB_MASS_STORAGE
-+#define CONFIG_USB_GADGET_MASS_STORAGE
-
- /* USB TI's IDs */
- #define CONFIG_G_DNL_VENDOR_NUM 0x0451
diff --git a/libre-testing/uboot4grub-am335x_bone/PKGBUILD b/libre-testing/uboot4grub-am335x_bone/PKGBUILD
deleted file mode 100644
index 79e225f3a..000000000
--- a/libre-testing/uboot4grub-am335x_bone/PKGBUILD
+++ /dev/null
@@ -1,45 +0,0 @@
-# U-Boot: BeagleBone and BeagleBone Black
-# Maintainer: André Silva <emulatorman@hyperbola.info>
-
-buildarch=4
-
-pkgname=uboot4grub-am335x_bone
-pkgver=2015.04
-pkgrel=4
-pkgdesc="U-Boot with GRUB support for BeagleBone and BeagleBone Black"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-depends=('grub-am335x_bone')
-conflicts=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts'
- 'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck'
- 'uboot-beaglebone' 'uboot-am335x_bone' 'uboot4extlinux-am335x_bone')
-makedepends=('bc')
-license=('GPL')
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications+grub-support.patch'
- 'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
- '109779c2b15013d54dc2f576651219e4'
- 'ccb79775b81654e16fca18825c7f2506')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications+grub-support.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- make distclean
- make am335x_evm_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
-}
diff --git a/libre-testing/uboot4grub-am335x_bone/uEnv.txt b/libre-testing/uboot4grub-am335x_bone/uEnv.txt
deleted file mode 100644
index f432efc6b..000000000
--- a/libre-testing/uboot4grub-am335x_bone/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=coherent_pool=1M
diff --git a/libre-testing/uboot4grub-am335x_bone/uboot4grub-am335x_bone.install b/libre-testing/uboot4grub-am335x_bone/uboot4grub-am335x_bone.install
deleted file mode 100644
index 0ab634efe..000000000
--- a/libre-testing/uboot4grub-am335x_bone/uboot4grub-am335x_bone.install
+++ /dev/null
@@ -1,36 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
- echo "# grub-install /dev/mmcblk0"
- echo "# grub-mkconfig -o /boot/grub/grub.cfg"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
- grub-install /dev/mmcblk0
- grub-mkconfig -o /boot/grub/grub.cfg
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre-testing/uboot4grub-omap3_beagle/0001-parabola-arm-modifications+grub-support.patch b/libre-testing/uboot4grub-omap3_beagle/0001-parabola-arm-modifications+grub-support.patch
deleted file mode 100644
index 2a795a70b..000000000
--- a/libre-testing/uboot4grub-omap3_beagle/0001-parabola-arm-modifications+grub-support.patch
+++ /dev/null
@@ -1,298 +0,0 @@
-diff -Nur u-boot-2015.04.orig/board/ti/beagle/beagle.c u-boot-2015.04/board/ti/beagle/beagle.c
---- u-boot-2015.04.orig/board/ti/beagle/beagle.c 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/board/ti/beagle/beagle.c 2015-10-16 17:55:32.598948802 -0300
-@@ -56,6 +56,7 @@
- #define BBTOYS_WIFI 0x01000B00
- #define BBTOYS_VGA 0x02000B00
- #define BBTOYS_LCD 0x03000B00
-+#define BBTOYS_ULCD 0x04000B00
- #define BCT_BRETTL3 0x01000F00
- #define BCT_BRETTL4 0x02000F00
- #define LSR_COM6L_ADPT 0x01001300
-@@ -211,25 +212,25 @@
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
--static unsigned int get_expansion_id(void)
-+static unsigned int get_expansion_id(int eeprom_address)
- {
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-+ if (i2c_probe(eeprom_address) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
- sizeof(expansion_config));
- }
-
-@@ -341,15 +342,18 @@
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -390,7 +394,7 @@
- generate_fake_mac = true;
- }
-
-- switch (get_expansion_id()) {
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
-@@ -471,6 +475,30 @@
- }
-
- if (expansion_config.content == 1)
-+ setenv(expansion_config.env_var, expansion_config.env_setting);
-+
-+ /* Scan 0x51 as well for loop-thru boards */
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
-+ case BBTOYS_ULCD:
-+ printf("Recognized BeagleBoardToys uLCD-lite board\n");
-+ setenv("buddy2", "bbtoys-ulcd");
-+ setenv("defaultdisplay", "dvi");
-+ setenv("dvimode", "800x480MR-16@60");
-+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
-+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
-+ setenv("kmsmode", "video=DVI-D-1:800x480");
-+ break;
-+ case BEAGLE_NO_EEPROM:
-+ printf("No EEPROM on expansion board\n");
-+ setenv("buddy2", "none");
-+ break;
-+ default:
-+ printf("Unrecognized expansion board: %x\n",
-+ expansion_config.device_vendor);
-+ setenv("buddy2", "unknown");
-+ }
-+
-+ if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
-
- twl4030_power_init();
-diff -Nur u-boot-2015.04.orig/include/configs/omap3_beagle.h u-boot-2015.04/include/configs/omap3_beagle.h
---- u-boot-2015.04.orig/include/configs/omap3_beagle.h 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/include/configs/omap3_beagle.h 2015-10-16 18:38:50.576704443 -0300
-@@ -90,6 +90,16 @@
- #define CONFIG_USB_ETHER_MCS7830
- #define CONFIG_USB_ETHER_SMSC95XX
-
-+/* GRUB support */
-+#define CONFIG_API
-+#define CONFIG_SYS_MMC_MAX_DEVICE 1
-+
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /* GPIO banks */
- #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
- #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-@@ -129,137 +139,51 @@
- /* devices */
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "rdaddr=0x81000000\0" \
-- "fdt_high=0xffffffff\0" \
-- "fdtaddr=0x80f80000\0" \
-- "usbtty=cdc_acm\0" \
-- "bootfile=uImage\0" \
-- "ramdisk=ramdisk.gz\0" \
-- "bootdir=/boot\0" \
-- "bootpart=0:2\0" \
-+ "loadaddr=0x82000000\0" \
- "console=ttyO2,115200n8\0" \
-- "mpurate=auto\0" \
-- "buddy=none\0" \
-- "optargs=\0" \
-- "camera=none\0" \
-- "vram=12M\0" \
-- "dvimode=640x480MR-16@60\0" \
-- "defaultdisplay=dvi\0" \
-+ "fdtfile=undefined\0" \
-+ "bootpart=0:1\0" \
-+ "bootdir=/\0" \
-+ "grubfile=core.img\0" \
- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext3 rootwait\0" \
-- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
-- "nandrootfstype=ubifs\0" \
-- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-- "ramrootfstype=ext2\0" \
-+ "optargs=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "nandargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${nandroot} " \
-- "rootfstype=${nandrootfstype}\0" \
-- "findfdt=" \
-- "if test $beaglerev = AxBx; then " \
-- "setenv fdtfile omap3-beagle.dtb; fi; " \
-- "if test $beaglerev = Cx; then " \
-- "setenv fdtfile omap3-beagle.dtb; fi; " \
-- "if test $beaglerev = C4; then " \
-- "setenv fdtfile omap3-beagle.dtb; fi; " \
-- "if test $beaglerev = xMAB; then " \
-- "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \
-- "if test $beaglerev = xMC; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
-- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "validatefdt=" \
-- "if test $beaglerev = xMAB; then " \
-- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; " \
-- "fi; " \
-- "fi; \0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "bootm ${loadaddr}\0" \
-- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
-- "run mmcargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "nandboot=echo Booting from nand ...; " \
-- "run nandargs; " \
-- "nand read ${loadaddr} 280000 400000; " \
-- "bootm ${loadaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootm ${loadaddr}\0" \
-- "userbutton=if gpio input 173; then run userbutton_xm; " \
-- "else run userbutton_nonxm; fi;\0" \
-- "userbutton_xm=gpio input 4;\0" \
-- "userbutton_nonxm=gpio input 7;\0"
--/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-+ "root=${root} " \
-+ "${musb} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${grubfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
-+ "part uuid ${devtype} ${rootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "else " \
-+ "echo No GRUB found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
-+
- #define CONFIG_BOOTCOMMAND \
-- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run userbutton; then " \
-- "setenv bootenv uEnv.txt;" \
-- "else " \
-- "setenv bootenv user.txt;" \
-- "fi;" \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot;" \
-- "fi;" \
-- "fi; " \
-- "fi;" \
-- "run nandboot;" \
-- "setenv bootfile zImage;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcbootz; " \
-- "fi; " \
-+ "run mmcboot"
-
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
diff --git a/libre-testing/uboot4grub-omap3_beagle/PKGBUILD b/libre-testing/uboot4grub-omap3_beagle/PKGBUILD
deleted file mode 100644
index e5fd62b8d..000000000
--- a/libre-testing/uboot4grub-omap3_beagle/PKGBUILD
+++ /dev/null
@@ -1,53 +0,0 @@
-# U-Boot: BeagleBoard and BeagleBoard-xM
-# Maintainer: André Silva <emulatorman@hyperbola.info>
-
-buildarch=4
-
-pkgname=uboot4grub-omap3_beagle
-pkgver=2015.04
-pkgrel=2
-pkgdesc="U-Boot with GRUB support for BeagleBoard and BeagleBoard-xM"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-depends=('grub-beagleboard')
-makedepends=('bc')
-replaces=('uboot-beagleboard' 'uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts'
- 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck'
- 'uboot-beagleboard-linux-libre-knock' 'uboot-beagleboard-linux-libre-lts-knock'
- 'uboot-beagleboard-linux-libre-audit' 'uboot-beagleboard-linux-libre-rt'
- 'uboot-beagleboard-linux-libre-grsec-knock')
-conflicts=('uboot-beagleboard' 'uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts'
- 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck'
- 'uboot-beagleboard-linux-libre-knock' 'uboot-beagleboard-linux-libre-lts-knock'
- 'uboot-beagleboard-linux-libre-audit' 'uboot-beagleboard-linux-libre-rt'
- 'uboot-beagleboard-linux-libre-grsec-knock' 'uboot4grub')
-provides=('uboot-beagleboard' 'uboot4grub')
-
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications+grub-support.patch'
- 'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
- '0191ec435ed2eb1d02d0f9178296146c'
- 'd41d8cd98f00b204e9800998ecf8427e')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications+grub-support.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS CFLAGS CXXFLAGS
-
- make distclean
- make omap3_beagle_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
-}
diff --git a/libre-testing/uboot4grub-omap3_beagle/uEnv.txt b/libre-testing/uboot4grub-omap3_beagle/uEnv.txt
deleted file mode 100644
index e69de29bb..000000000
--- a/libre-testing/uboot4grub-omap3_beagle/uEnv.txt
+++ /dev/null
diff --git a/libre-testing/uboot4grub-udoo/0001-parabola-arm-modifications+grub-support.patch b/libre-testing/uboot4grub-udoo/0001-parabola-arm-modifications+grub-support.patch
deleted file mode 100644
index 70903de64..000000000
--- a/libre-testing/uboot4grub-udoo/0001-parabola-arm-modifications+grub-support.patch
+++ /dev/null
@@ -1,370 +0,0 @@
-diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg
---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2015-10-16 14:43:36.733740112 -0300
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+
-+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
-+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040
-+
-+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3
-+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63
-+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
-+
-+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
-+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
-+
-+
-+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
-+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
-+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
-+
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
-+
-+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
-+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003
-+
-+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
-+
-+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
-+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
-+
-+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251
-+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200
-+
-+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45
-+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744
-+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336
-+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630
-+
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F
-+
-+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000
-+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000
-+
-+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
-+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
-diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg
---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2015-10-16 14:43:36.733740112 -0300
-@@ -0,0 +1,84 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ *
-+ * Device Configuration Data (DCD)
-+ *
-+ * Each entry must have the format:
-+ * Addr-type Address Value
-+ *
-+ * where:
-+ * Addr-type register length (1,2 or 4 bytes)
-+ * Address absolute address of the register
-+ * value value to be stored in the register
-+ */
-+
-+/*
-+ * DDR3 settings
-+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
-+ * memory bus width: 64 bits x16/x32/x64
-+ * MX6DL ddr is limited to 800 MHz(400 MHz clock)
-+ * memory bus width: 64 bits x16/x32/x64
-+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
-+ * memory bus width: 32 bits x16/x32
-+ */
-+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028
-+
-+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028
-+
-+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028
-+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028
-+
-+/* (differential input) */
-+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
-+/* (differential input) */
-+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
-+/* disable ddr pullups */
-+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
-+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
-+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
-+
-+/* Read data DQ Byte0-3 delay */
-+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
-diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg
---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2015-10-16 14:43:36.733740112 -0300
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2013 Boundary Devices
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ *
-+ * Refer doc/README.imximage for more details about how-to configure
-+ * and create imximage boot image
-+ *
-+ * The syntax is taken as close as possible with the kwbimage
-+ */
-+
-+/* image version */
-+IMAGE_VERSION 2
-+
-+/*
-+ * Boot Device : one of
-+ * spi, sd (the board has no nand neither onenand)
-+ */
-+BOOT_FROM sd
-+
-+#define __ASSEMBLY__
-+#include <config.h>
-+#include "asm/arch/mx6-ddr.h"
-+#include "asm/arch/iomux.h"
-+#include "asm/arch/crm_regs.h"
-+
-+#include "ddr-setup_dl.cfg"
-+#include "1066mhz_4x256mx16_dl.cfg"
-+#include "clocks.cfg"
-diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig
---- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/configs/udoo_dl_defconfig 2015-10-16 14:43:36.747072798 -0300
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024"
-+CONFIG_ARM=y
-+CONFIG_TARGET_UDOO=y
-diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h
---- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200
-+++ u-boot-2015.01/include/configs/udoo.h 2015-10-16 18:33:35.589059733 -0300
-@@ -78,7 +78,7 @@
- #define CONFIG_CMD_BMODE
- #define CONFIG_CMD_SETEXPR
-
--#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTDELAY 1
-
- #define CONFIG_SYS_MEMTEST_START 0x10000000
- #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-@@ -96,60 +96,83 @@
- #define CONFIG_BOUNCE_BUFFER
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
-
-+/* GRUB support */
-+#define CONFIG_API
-+#define CONFIG_SYS_MMC_MAX_DEVICE 1
-+
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb"
-+#elif defined(CONFIG_MX6Q)
- #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb"
-+#endif
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "script=boot.scr\0" \
-- "image=zImage\0" \
-- "console=ttymxc1\0" \
-+ "grubfile=grub/arm-uboot/core.img\0" \
-+ "bootdir=/boot\0" \
-+ "console=ttymxc1,115200\0" \
- "splashpos=m,m\0" \
-- "fdt_high=0xffffffff\0" \
-- "initrd_high=0xffffffff\0" \
-- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-- "fdt_addr=0x18000000\0" \
-- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
-+ "optargs=\0" \
-+ "video=\0" \
- "mmcdev=0\0" \
-- "mmcpart=1\0" \
-- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-- "update_sd_firmware_filename=u-boot.imx\0" \
-- "update_sd_firmware=" \
-- "if test ${ip_dyn} = yes; then " \
-- "setenv get_cmd dhcp; " \
-+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
-+ "mmcargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${mmcroot} " \
-+ "video=${video}\0" \
-+ "videoargs=" \
-+ "setenv nextcon 0; " \
-+ "if hdmidet; then " \
-+ "setenv bootargs ${bootargs} " \
-+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
-+ "if=RGB24; " \
-+ "setenv fbmem fbmem=28M; " \
-+ "setexpr nextcon ${nextcon} + 1; " \
- "else " \
-- "setenv get_cmd tftp; " \
-+ "echo - no HDMI monitor;" \
- "fi; " \
-- "if mmc dev ${mmcdev}; then " \
-- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
-- "setexpr fw_sz ${filesize} / 0x200; " \
-- "setexpr fw_sz ${fw_sz} + 1; " \
-- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-- "fi; " \
-- "fi\0" \
-- "mmcargs=setenv bootargs console=${console},${baudrate} " \
-- "root=${mmcroot}\0" \
-- "loadbootscript=" \
-- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-- "bootscript=echo Running bootscript from mmc ...; " \
-- "source\0" \
-- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-+ "i2c dev 1; " \
-+ "if i2c probe 0x10; then " \
-+ "setenv bootargs ${bootargs} " \
-+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-+ "if=RGB666; " \
-+ "if test 0 -eq ${nextcon}; then " \
-+ "setenv fbmem fbmem=10M; " \
- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-+ "setenv fbmem ${fbmem},10M; " \
- "fi; " \
-+ "setexpr nextcon ${nextcon} + 1; " \
- "else " \
-- "bootz; " \
-+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-+ "fi; " \
-+ "setenv bootargs ${bootargs} ${fbmem}\0" \
-+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${grubfile}\0" \
-+ "mmcboot=mmc dev ${mmcdev}; " \
-+ "if mmc rescan; then " \
-+ "echo SD/MMC found on device ${mmcdev};" \
-+ "setenv bootpart ${mmcdev}:1; " \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi; " \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "else " \
-+ "echo No GRUB found;" \
-+ "fi;" \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
-@@ -161,32 +184,10 @@
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
-- "${get_cmd} ${image}; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0"
-+ "${get_cmd} ${grubfile};\0"
-
- #define CONFIG_BOOTCOMMAND \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot; " \
-- "else run netboot; " \
-- "fi; " \
-- "fi; " \
-- "else run netboot; fi"
-+ "run mmcboot;"
-
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_LONGHELP
-@@ -227,6 +228,7 @@
-
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
-
- #ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE
diff --git a/libre-testing/uboot4grub-udoo/0002-kernel-add-support-for-gcc-5.patch b/libre-testing/uboot4grub-udoo/0002-kernel-add-support-for-gcc-5.patch
deleted file mode 100644
index 30718c561..000000000
--- a/libre-testing/uboot4grub-udoo/0002-kernel-add-support-for-gcc-5.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001
-From: Sasha Levin <sasha.levin@oracle.com>
-Date: Mon, 13 Oct 2014 15:51:05 -0700
-Subject: [PATCH 2/6] kernel: add support for gcc 5
-
-We're missing include/linux/compiler-gcc5.h which is required now
-because gcc branched off to v5 in trunk.
-
-Just copy the relevant bits out of include/linux/compiler-gcc4.h,
-no new code is added as of now.
-
-This fixes a build error when using gcc 5.
-
-Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
- include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 0000000..cdd1cc2
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,66 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ in the preprocessor, but we can live with this because they're unreleased.
-+ Maketime probing would be overkill here.
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased. Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ * Fixed in GCC 4.8.2 and later versions.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
---
-2.4.4
-
diff --git a/libre-testing/uboot4grub-udoo/PKGBUILD b/libre-testing/uboot4grub-udoo/PKGBUILD
deleted file mode 100644
index 64c211b30..000000000
--- a/libre-testing/uboot4grub-udoo/PKGBUILD
+++ /dev/null
@@ -1,79 +0,0 @@
-# U-Boot: UDOO
-# Maintainer: André Silva <emulatorman@hyperbola.info>
-
-buildarch=4
-
-pkgbase=uboot4grub-udoo
-pkgname=('uboot4grub-udoo_dl' 'uboot4grub-udoo_quad')
-pkgver=2015.01
-pkgrel=1
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-makedepends=('bc')
-depends=('grub-udoo')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications+grub-support.patch'
- '0002-kernel-add-support-for-gcc-5.patch')
-md5sums=('7f08dc9e98a71652bd6968888ed6ec95'
- 'e2176de47d43fc4e75e4752a7622021d'
- '721a46867e189d8dedc6b6f86a536a34')
-
-prepare() {
- cd u-boot-${pkgver}
-
- patch -Np1 -i ../0001-parabola-arm-modifications+grub-support.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- mkdir bins
- for i in dl quad; do
- make distclean
- make udoo_${i}_config
- make
- mv u-boot.imx bins/u-boot-${i}.imx
- done
-}
-
-package_uboot4grub-udoo_dl() {
- pkgdesc="U-Boot with GRUB support for UDOO Dual"
- replaces=('uboot-udoo-dual' 'uboot-udoo-dual-linux-libre'
- 'uboot-udoo-dual-linux-libre-lts' 'uboot-udoo-dual-linux-libre-grsec'
- 'uboot-udoo-dual-linux-libre-pck' 'uboot-udoo-dual-linux-libre-knock'
- 'uboot-udoo-dual-linux-libre-lts-knock' 'uboot-udoo-dual-linux-libre-audit'
- 'uboot-udoo-dual-linux-libre-rt' 'uboot-udoo-dual-linux-libre-grsec-knock')
- conflicts=('uboot4grub' 'uboot-udoo-dual' 'uboot-udoo-dual-linux-libre'
- 'uboot-udoo-dual-linux-libre-lts' 'uboot-udoo-dual-linux-libre-grsec'
- 'uboot-udoo-dual-linux-libre-pck' 'uboot-udoo-dual-linux-libre-knock'
- 'uboot-udoo-dual-linux-libre-lts-knock' 'uboot-udoo-dual-linux-libre-audit'
- 'uboot-udoo-dual-linux-libre-rt' 'uboot-udoo-dual-linux-libre-grsec-knock')
- provides=('uboot4grub' 'uboot-udoo-dual')
- install=${pkgbase}.install
-
- mkdir -p "${pkgdir}"/boot
- cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}"/boot/u-boot.imx
-}
-
-package_uboot4grub-udoo_quad() {
- pkgdesc="U-Boot with GRUB support for UDOO Quad"
- replaces=('uboot-udoo-quad' 'uboot-udoo-quad-linux-libre'
- 'uboot-udoo-quad-linux-libre-lts' 'uboot-udoo-quad-linux-libre-grsec'
- 'uboot-udoo-quad-linux-libre-pck' 'uboot-udoo-quad-linux-libre-knock'
- 'uboot-udoo-quad-linux-libre-lts-knock' 'uboot-udoo-quad-linux-libre-audit'
- 'uboot-udoo-quad-linux-libre-rt' 'uboot-udoo-quad-linux-libre-grsec-knock')
- conflicts=('uboot4grub' 'uboot-udoo-quad' 'uboot-udoo-quad-linux-libre'
- 'uboot-udoo-quad-linux-libre-lts' 'uboot-udoo-quad-linux-libre-grsec'
- 'uboot-udoo-quad-linux-libre-pck' 'uboot-udoo-quad-linux-libre-knock'
- 'uboot-udoo-quad-linux-libre-lts-knock' 'uboot-udoo-quad-linux-libre-audit'
- 'uboot-udoo-quad-linux-libre-rt' 'uboot-udoo-quad-linux-libre-grsec-knock')
- provides=('uboot4grub' 'uboot-udoo-quad')
- install=${pkgbase}.install
-
- mkdir -p "${pkgdir}"/boot
- cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}"/boot/u-boot.imx
-}
diff --git a/libre-testing/uboot4grub-udoo/uboot4grub-udoo.install b/libre-testing/uboot4grub-udoo/uboot4grub-udoo.install
deleted file mode 100644
index 59d33a027..000000000
--- a/libre-testing/uboot4grub-udoo/uboot4grub-udoo.install
+++ /dev/null
@@ -1,27 +0,0 @@
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do you want to do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
- grub-install /dev/mmcblk0
- grub-mkconfig -o /boot/grub/grub.cfg
- sync
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
- echo "# grub-install /dev/mmcblk0"
- echo "# grub-mkconfig -o /boot/grub/grub.cfg"
- fi
-}
-
-## arg 1: the new package version
-post_install() {
- flash_uboot
-}
-
-## arg 1: the new package version
-## arg 2: the old package version
-post_upgrade() {
- flash_uboot
-}