syslinux-6.02-3: updating version

9 files changed, 0 insertions, 839 deletions

diff --git a/libre-testing/syslinux/PKGBUILD b/libre-testing/syslinux/PKGBUILD
deleted file mode 100644
index 8a8845f0b..000000000
--- a/libre-testing/syslinux/PKGBUILD
+++ /dev/null
@@ -1,169 +0,0 @@
-# Maintainer: Tobias Powalowski <tpowa@archlinux.org>
-# Maintainer: Thomas Bächler <thomas@archlinux.org>
-# Contributor: Keshav Padram (the.ridikulus.rat) (aatt) (gemmaeiil) (ddoott) (ccoomm)>
-# Maintainer (Parabola): André Silva <emulatorman@lavabit.com>
-
-pkgname="syslinux"
-pkgver="6.01"
-pkgrel="4.1"
-arch=('x86_64' 'i686')
-pkgdesc="Collection of boot loaders that boot from FAT, ext2/3/4 and btrfs filesystems, from CDs and via PXE (Parabola rebranded)"
-url="http://syslinux.zytor.com/"
-license=('GPL2')
-options=('!makeflags' '!emptydirs')
-backup=('boot/syslinux/syslinux.cfg'
-        'boot/syslinux/splash.png')
-makedepends=('python2' 'nasm' 'gnu-efi-libs')
-depends=('perl' 'glibc')
-optdepends=('perl-passwd-md5:  For md5pass'
-            'perl-digest-sha1: For sha1pass'
-            'mtools:           For mkdiskimage and syslinux support'
-            'gptfdisk:         For GPT support'
-            'util-linux:       For isohybrid'
-            'efibootmgr:       For EFI support'
-            'dosfstools:       For EFI support')
-md5sums=('5fe8959b92255143a334167ca1c395a6'
-         'f048880b57e2c5a7017ff8804bfda327'
-         '0e7d47e1f791f0c5e7bd40ed5c6d80cc'
-         'cb46ca47c6b6323127d908440057d98f')
-
-install="${pkgname}.install"
-
-source=("https://www.kernel.org/pub/linux/utils/boot/syslinux/${pkgname}-${pkgver}.tar.xz"
-        'syslinux.cfg'
-        'syslinux-install_update'
-        'splash.png')
-
-_build_syslinux_bios() {
-    
-    rm -rf "${srcdir}/${pkgname}-${pkgver}-bios/" || true
-    cp -r "${srcdir}/${pkgname}-${pkgver}" "${srcdir}/${pkgname}-${pkgver}-bios"
-    cd "${srcdir}/${pkgname}-${pkgver}-bios/"
-    
-    ## Do not try to build syslinux with our default LDFLAGS, it will fail
-    unset LDFLAGS
-    
-    make PYTHON="python2" bios
-    make PYTHON="python2" bios installer
-    
-}
-
-_build_syslinux_efi64() {
-    
-    rm -rf "${srcdir}/${pkgname}-${pkgver}-efi64/" || true
-    cp -r "${srcdir}/${pkgname}-${pkgver}" "${srcdir}/${pkgname}-${pkgver}-efi64"
-    cd "${srcdir}/${pkgname}-${pkgver}-efi64/"
-    
-    ## Unset all compiler FLAGS for efi64 build
-    unset CFLAGS
-    unset CPPFLAGS
-    unset CXXFLAGS
-    unset LDFLAGS
-    unset MAKEFLAGS
-    
-    make PYTHON="python2" efi64
-    make PYTHON="python2" efi64 installer
-    
-}
-
-_build_syslinux_efi32() {
-    
-    rm -rf "${srcdir}/${pkgname}-${pkgver}-efi32/" || true
-    cp -r "${srcdir}/${pkgname}-${pkgver}" "${srcdir}/${pkgname}-${pkgver}-efi32"
-    cd "${srcdir}/${pkgname}-${pkgver}-efi32/"
-    
-    ## Unset all compiler FLAGS for efi32 build
-    unset CFLAGS
-    unset CPPFLAGS
-    unset CXXFLAGS
-    unset LDFLAGS
-    unset MAKEFLAGS
-    
-    make PYTHON="python2" efi32
-    make PYTHON="python2" efi32 installer
-    
-}
-
-build() {
-    
-    cd "${srcdir}/${pkgname}-${pkgver}/"
-    
-    ## Do not try to build the Windows or DOS installers and DIAG files
-    sed 's|diag libinstaller dos win32 win64 dosutil txt|libinstaller txt|g' -i "${srcdir}/${pkgname}-${pkgver}/Makefile" || true
-    sed 's|win32/syslinux.exe win64/syslinux64.exe||g' -i "${srcdir}/${pkgname}-${pkgver}/Makefile" || true
-    sed 's|dosutil/*.com dosutil/*.sys||g' -i "${srcdir}/${pkgname}-${pkgver}/Makefile" || true
-    sed 's|dos/syslinux.com||g' -i "${srcdir}/${pkgname}-${pkgver}/Makefile" || true
-    sed 's|INSTALLSUBDIRS = com32 utils dosutil|INSTALLSUBDIRS = com32 utils|g' -i "${srcdir}/${pkgname}-${pkgver}/Makefile" || true
-    sed 's|install -m 644 -c $(INSTALL_DIAG) $(INSTALLROOT)$(DIAGDIR)|# install -m 644 -c $(INSTALL_DIAG) $(INSTALLROOT)$(DIAGDIR)|g' -i "${srcdir}/${pkgname}-${pkgver}/Makefile" || true
-    
-    ## Fix FHS manpage path
-    sed 's|/usr/man|/usr/share/man|g' -i "${srcdir}/${pkgname}-${pkgver}/mk/syslinux.mk" || true
-    
-    ## Build syslinux-efi
-    if [[ "${CARCH}" == "x86_64" ]]; then
-        _build_syslinux_efi64
-    fi
-    
-    if [[ "${CARCH}" == "i686" ]]; then
-        _build_syslinux_efi32
-    fi
-    
-    ## Build syslinux-bios
-    _build_syslinux_bios
-    
-}
-
-_package_syslinux_bios() {
-    
-    cd "${srcdir}/${pkgname}-${pkgver}-bios/"
-    
-    ## Install Syslinux bios
-    make INSTALLROOT="${pkgdir}/" AUXDIR="/usr/lib/syslinux/bios/" bios install
-    
-    ## Remove syslinux.exe,syslinux64.exe,syslinux.com and dosutil dir
-    rm "${pkgdir}/usr/lib/syslinux/bios"/syslinux.{com,exe} || true
-    rm "${pkgdir}/usr/lib/syslinux/bios/syslinux64.exe" || true
-    rm -rf "${pkgdir}/usr/lib/syslinux/bios/dosutil/" || true
-    
-    ## Remove com32 and diag dirs
-    rm -rf "${pkgdir}/usr/lib/syslinux/bios/diag/" || true
-    rm -rf "${pkgdir}/usr/lib/syslinux/bios/com32/" || true
-    
-    ## Move extlinux binary to /usr/bin
-    install -d "${pkgdir}/usr/bin"
-    mv "${pkgdir}/sbin/extlinux" "${pkgdir}/usr/bin/extlinux"
-    rm -rf "${pkgdir}/sbin/"
-    
-    ## Install docs
-    install -d "${pkgdir}/usr/share/doc"
-    cp -ar "${srcdir}/${pkgname}-${pkgver}/doc" "${pkgdir}/usr/share/doc/syslinux"
-    
-    ## Install the default configuration
-    install -D -m0644 "${srcdir}/syslinux.cfg" "${pkgdir}/boot/syslinux/syslinux.cfg"
-    
-    ## Install the installation and update script
-    ## This script is maintained at git://gist.github.com/772138.git
-    ## Script not yet updated for syslinux-efi
-    install -D -m0755 "${srcdir}/syslinux-install_update" "${pkgdir}/usr/bin/syslinux-install_update"
-    
-    # Install Parabola splash
-    install -D -m644 "${srcdir}/splash.png" "${pkgdir}/boot/syslinux/splash.png"
-}
-
-package() {
-    
-    cd "${srcdir}/${pkgname}-${pkgver}/"
-    
-    if [[ "${CARCH}" == "x86_64" ]]; then
-        cd "${srcdir}/${pkgname}-${pkgver}-efi64/"
-        make INSTALLROOT="${pkgdir}/" AUXDIR="/usr/lib/syslinux/" efi64 install
-    fi
-    
-    if [[ "${CARCH}" == "i686" ]]; then
-        cd "${srcdir}/${pkgname}-${pkgver}-efi32/"
-        make INSTALLROOT="${pkgdir}/" AUXDIR="/usr/lib/syslinux/" efi32 install
-    fi
-    
-    _package_syslinux_bios
-    
-}
diff --git a/libre-testing/syslinux/splash.png b/libre-testing/syslinux/splash.png
deleted file mode 100644
index eac14536b..000000000
--- a/libre-testing/syslinux/splash.png
+++ /dev/null
diff --git a/libre-testing/syslinux/splash.xcf b/libre-testing/syslinux/splash.xcf
deleted file mode 100644
index c27d04445..000000000
--- a/libre-testing/syslinux/splash.xcf
+++ /dev/null
diff --git a/libre-testing/syslinux/syslinux-6.00-efi-export-kbdmap.patch b/libre-testing/syslinux/syslinux-6.00-efi-export-kbdmap.patch
deleted file mode 100644
index cbcd9a6da..000000000
--- a/libre-testing/syslinux/syslinux-6.00-efi-export-kbdmap.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 2a81889c7d680fbe51de63dbbeb4e8c290ec46fa Mon Sep 17 00:00:00 2001
-From: Matt Fleming <matt.fleming@intel.com>
-Date: Fri, 21 Jun 2013 07:14:24 +0000
-Subject: efi: Tag symbols with __export
-
-I missed some symbols previously that are required to be exported when
-loading vesamenu.c32.
-
-Signed-off-by: Matt Fleming <matt.fleming@intel.com>
----
-diff --git a/efi/main.c b/efi/main.c
-index 51ff9f3..71333a4 100644
---- a/efi/main.c
-+++ b/efi/main.c
-@@ -21,7 +21,7 @@ uint32_t _IdleTimer = 0;
- char __lowmem_heap[32];
- uint32_t BIOS_timer_next;
- uint32_t timer_irq;
--uint8_t KbdMap[256];
-+__export uint8_t KbdMap[256];
- char aux_seg[256];
- 
- static inline EFI_STATUS
-diff --git a/efi/vesa.c b/efi/vesa.c
-index d259f60..b4a541b 100644
---- a/efi/vesa.c
-+++ b/efi/vesa.c
-@@ -297,7 +297,7 @@ static int efi_vesacon_font_query(uint8_t **font)
-     return cp865_8x16_font_height;
- }
- 
--int __vesacon_i915resolution(int x, int y)
-+__export int __vesacon_i915resolution(int x, int y)
- {
- 	/* We don't support this function */
- 	return 1;
---
-cgit v0.9.2
diff --git a/libre-testing/syslinux/syslinux-6.00-efi-fix-libcom32.patch b/libre-testing/syslinux/syslinux-6.00-efi-fix-libcom32.patch
deleted file mode 100644
index 7460cd195..000000000
--- a/libre-testing/syslinux/syslinux-6.00-efi-fix-libcom32.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 013ef7679a573b3b3454f914f3a7f865991db9f2 Mon Sep 17 00:00:00 2001
-From: Matt Fleming <matt.fleming@intel.com>
-Date: Fri, 21 Jun 2013 07:13:16 +0000
-Subject: efi: Export __bcopyxx_len
-
-We need to provide a __bcopyxx_len symbol for EFI because it's
-referenced in generic code in libcom32.c32. Without this change,
-libcom32.c32 will fail to load under EFI.
-
-Signed-off-by: Matt Fleming <matt.fleming@intel.com>
----
-diff --git a/core/include/core.h b/core/include/core.h
-index 5736d39..127ac65 100644
---- a/core/include/core.h
-+++ b/core/include/core.h
-@@ -26,6 +26,7 @@ extern char cmd_line[];
- extern char ConfigFile[];
- extern char syslinux_banner[];
- extern char copyright_str[];
-+extern unsigned int __bcopyxx_len;
- 
- /*
-  * Mark symbols that are only used by BIOS as __weak until we can move
-@@ -35,7 +36,6 @@ extern char copyright_str[];
- extern __weak uint16_t BIOSName;
- extern __weak char KernelName[];
- extern __weak char StackBuf[];
--extern __weak unsigned int __bcopyxx_len;
- 
- extern uint8_t KbdMap[256];
- 
-diff --git a/efi/main.c b/efi/main.c
-index 438e88c..51ff9f3 100644
---- a/efi/main.c
-+++ b/efi/main.c
-@@ -153,6 +153,7 @@ void pxenv(void)
- uint16_t BIOS_fbm = 1;
- far_ptr_t InitStack;
- far_ptr_t PXEEntry;
-+__export unsigned int __bcopyxx_len = 0;
- 
- void gpxe_unload(void)
- {
---
-cgit v0.9.2
diff --git a/libre-testing/syslinux/syslinux-dont-build-dos-windows-targets.patch b/libre-testing/syslinux/syslinux-dont-build-dos-windows-targets.patch
deleted file mode 100644
index 54151ab87..000000000
--- a/libre-testing/syslinux/syslinux-dont-build-dos-windows-targets.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -Nur syslinux-4.02.orig//Makefile syslinux-4.02//Makefile
---- syslinux-4.02.orig//Makefile	2010-07-21 21:33:13.000000000 +0200
-+++ syslinux-4.02//Makefile	2010-07-22 11:14:03.325522937 +0200
-@@ -54,7 +54,7 @@
- # files that depend only on the B phase, but may have to be regenerated
- # for "make installer".
- BSUBDIRS = codepage com32 lzo core memdisk mbr memdump gpxe sample \
--	   diag libinstaller dos win32 win64 dosutil txt
-+	   libinstaller txt
- ITARGET  =
- IOBJECTS = $(ITARGET) \
- 	utils/gethostip utils/isohybrid utils/mkdiskimage \
diff --git a/libre-testing/syslinux/syslinux-install_update b/libre-testing/syslinux/syslinux-install_update
deleted file mode 100644
index 4dc09696a..000000000
--- a/libre-testing/syslinux/syslinux-install_update
+++ /dev/null
@@ -1,461 +0,0 @@
-#!/usr/bin/env bash
-#
-# Syslinux Installer / Updater Script (for BIOS only)
-# Copyright (C) 2013  Matthew Gyurgyik <pyther@pyther.net>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-#
-#-----------------
-# Exit Codes:
-#   1 - get_boot_device or other function failed
-#   2 - install/update failed
-#   3 - set_active failed
-#   4 - install_mbr failed
-#
-shopt -s nullglob
-
-bios_libpath="/usr/lib/syslinux/bios/"
-bios_bootpath="/boot/syslinux/"
-EXTLINUX="/usr/bin/extlinux"
-
-bios_core_modules=(config.c32 chain.c32 ldlinux.c32 libcom32.c32 libgpl.c32 liblua.c32 libmenu.c32 libutil.c32 linux.c32 menu.c32 vesamenu.c32)
-bios_autoupdate_file="/boot/syslinux/SYSLINUX_AUTOUPDATE"
-pciids_file="/usr/share/hwdata/pci.ids"
-
-## Helper functions ##
-# Taken from libui-sh
-# $1 needle
-# $2 set (array) haystack
-check_is_in() {
-    local needle="$1" element
-    shift
-    for element; do
-        [[ $element = $needle ]] && return 0
-    done
-    return 1
-}
-
-# return true when blockdevice is an md raid, otherwise return a unset value
-# get all devices that are part of raid device $1
-device_is_raid() {
-    [[ $1 && -f /proc/mdstat ]] || return 1
-    local devmajor=$(stat -c %t "$1")
-    (( devmajor == 9 ))
-}
-
-mdraid_all_slaves() {
-    local slave slaves
-    for slave in /sys/class/block/${1##*/}/slaves/*; do
-        source "$slave/uevent"
-        slaves="$slaves/dev/$DEVNAME "
-        unset DEVNAME
-    done
-    echo $slaves
-}
-
-# Check /sys/block to see if device is partitioned
-# If we have a partitioned block device (sda1) /sys/block/sda1/dev will not exist
-# However, if we have an unpartitioned block device (sda) /sys/block/sda/dev will exist
-dev_is_part() {
-    # $1 - blockdevice
-    local dev=$1
-
-    # If block device uevent file should be found
-    # If a partition is passed in path shouldn't exist
-    if [[ $dev = *cciss* ]]; then
-        [[ -f /sys/block/cciss\!${dev##*/}/dev ]] && return 1
-    elif [[ $dev = *ida* ]]; then
-        [[ -f /sys/block/ida\!${dev##*/}/dev ]] && return 1
-    else
-        [[ -f /sys/block/${dev##*/}/dev ]] && return 1
-    fi
-
-    return 0
-}
-
-# If EFI PART is present in the first 8 bytes then it must be a GPT disk
-device_is_gpt() {
-    local partsig=$(dd if="$1" skip=64 bs=8 count=1 2>/dev/null)
-    [[ $partsig = "EFI PART" ]]
-}
-
-clear_gpt_attr2() {
-    # $1 - Block Device, no partitions
-    local disk=$1
-
-    # Special Exception for cciss controllers
-    if [[ $disk = *cciss* ]]; then
-        for part in /dev/cciss/${disk##*/}*p*; do
-            local partnum="${part##*[[:alpha:]]}"
-            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
-        done
-    # Smart 2 Controllers
-    elif [[ $disk = *ida* ]]; then
-        for part in /dev/ida/${disk##*/}*p*; do
-            local partnum="${part##*[[:alpha:]]}"
-            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
-        done
-    else
-        for part in  /sys/block/${disk##*/}/${disk##*/}*; do
-            local partnum="${part##*[[:alpha:]]}"
-            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
-        done
-    fi
-    return 0
-}
-
-usage() {
-cat << EOF
-usage: $0 options
-
-This script will install or upgrade Syslinux (for BIOS only)
-
-OPTIONS:
-  -h    Show this message
-  -i    Install Syslinux
-  -u    Update Syslinux
-  -a    Set Boot flag on boot partiton
-  -m    Install Syslinux MBR
-  -s    Updates Syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists
-
- Arguments Required:
-  -c    Chroot install (ex: -c /mnt)
-
-Example Usage: $0 -i -a -m     # (install, set boot flag, install mbr)
-               $0 -u           # (update)
-EOF
-}
-
-# Trys to find the partition that /boot resides on
-# This will either be on /boot or / (root)
-getBoot() {
-    if [[ ! -d "$bios_bootpath" ]]; then
-        echo "Could not find $bios_bootpath"
-        echo "Is boot mounted? Is Syslinux installed?"
-        exit 1
-    fi
-
-    syslinux_fs=(ext2 ext3 ext4 btrfs vfat)
-
-    # Use DATA from findmnt see rc.sysint for more info
-    if [[ -f /proc/self/mountinfo ]]; then
-        read rootdev rootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/")
-        read bootdev bootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/boot")
-    else
-        echo "Could not find /proc/self/mountinfo"
-        echo "Are you running a kernel greater than 2.6.24?"
-        exit 1
-    fi
-
-    if [[ $bootfs ]]; then
-        if ! check_is_in "$bootfs" "${syslinux_fs[@]}"; then
-            echo "/boot file system is not supported by Syslinux"
-            exit 1
-        fi
-        boot="boot"
-        bootpart="$bootdev"
-    elif [[ $rootfs ]]; then
-        if ! check_is_in "$rootfs" "${syslinux_fs[@]}"; then
-            echo "/ (root) file system is not supported by Syslinux"
-            exit 1
-        fi
-        boot="root"
-        bootpart="$rootdev"
-    else
-        echo "Could not find filesystem on / (root) or /boot."
-        exit 1
-    fi
-}
-
-# We store the partition table type either gpt or mbr in var ptb
-# In rare cases a user could have one raid disk using mbr and another using gpt
-# In such cases we accept that the output may be incomplete
-
-# Calls get_ptb() for $bootpart or for all device in RAID
-declare -A bootdevs
-get_boot_devices() {
-    if device_is_raid "$bootpart"; then
-        slaves=$(mdraid_all_slaves "$bootpart")
-
-        for slave in ${slaves[@]}; do
-            local disk="${slave%%[[:digit:]]*}"
-            device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
-            bootdevs[$slave]="$ptb"
-        done
-    else
-        local disk="${bootpart%%[[:digit:]]*}"
-        device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
-        bootdevs[$bootpart]="$ptb"
-    fi
-}
-
-# Function Assumes the boot partition should be marked as active
-# All other partitions should not have the boot flag set
-set_active() {
-    # If any bootdev is a block device without partitions bail
-    # we want to set the boot flag on partitioned disk
-    for dev in "${!bootdevs[@]}"; do
-        dev_is_part $dev || { echo "$dev - is a block device. Aborting set_active!"; return 1; }
-    done
-
-    # Clear BIOS Bootable Legacy Attribute for GPT drives
-    # In rare cases where a RAID device has slaves on the same block device
-    # Attribute 2 will be cleared for each partition multiple times
-    for dev in "${!bootdevs[@]}"; do
-        local ptb="${bootdevs[$dev]}"
-        if [[ "$ptb" = GPT ]]; then
-            local disk="${dev%%[[:digit:]]*}" #ex: /dev/sda
-            clear_gpt_attr2 "$disk"
-        fi
-    done
-
-    # Set the boot flag on bootdevs (generated from get_boot_devices)
-    for part in "${!bootdevs[@]}"; do
-        local ptb="${bootdevs[$part]}"
-        local partnum="${part##*[[:alpha:]]}"
-        case "$part" in
-            *[[:digit:]]p[[:digit:]]*)
-                local disk="${part%%p$partnum}" # get everything before p1
-                ;;
-            *)
-                local disk="${part%%[[:digit:]]*}"
-                ;;
-        esac
-
-        if [[ "$ptb" = MBR ]]; then
-            if sfdisk "$disk" -A "$partnum" &>/dev/null; then
-                echo "Boot Flag Set - $part"
-            else
-                echo "FAILED to Set the boot flag on $part"
-                exit 3
-            fi
-        elif [[ "$ptb" = GPT ]]; then
-            if sgdisk "$disk" --attributes="$partnum":set:2 &>/dev/null; then
-                echo "Attribute Legacy Bios Bootable Set - $part"
-            else
-                echo "FAILED to set attribute Legacy BIOS Bootable on $part"
-                exit 3
-            fi
-        fi
-    done
-    return 0
-}
-
-install_mbr() {
-    # If any bootdev is a block device without partitions bail
-    # we want to install the mbr to a partitioned disk
-    for dev in "${!bootdevs[@]}"; do
-        dev_is_part "$dev" || { echo "$dev - is a block device. Aborting MBR install"; return 1; }
-    done
-
-    for part in "${!bootdevs[@]}"; do
-        local partnum="${part##*[[:alpha:]]}"
-        case "$part" in
-            *[[:digit:]]p[[:digit:]]*)
-                local disk="${part%%p$partnum}" # get everything before p1
-                ;;
-            *)
-                local disk="${part%%[[:digit:]]*}"
-                ;;
-        esac
-        local ptb="${bootdevs[$part]}"
-
-        # We want to install to the root of the block device
-        # If the device is a partition - ABORT!
-        dev_is_part "$disk" && \
-        { echo "ABORT! MBR installation to partition ($disk)!"; exit 4;}
-
-        if [[ "$ptb" = MBR ]]; then
-            mbrfile="$bios_libpath/mbr.bin"
-        elif [[ "$ptb" = GPT ]]; then
-            mbrfile="$bios_libpath/gptmbr.bin"
-        fi
-
-        if dd bs=440 count=1 conv=notrunc if="$mbrfile" of="$disk" &> /dev/null; then
-            echo "Installed MBR ($mbrfile) to $disk"
-        else
-            echo "Error Installing MBR ($mbrfile) to $disk"
-            exit 4
-        fi
-    done
-    return 0
-}
-
-install_modules() {
-    # Copy all com32 files to /boot
-    for file in "${bios_libpath}"/*.c32; do
-        file=${file##*/}
-        rm "$bios_bootpath/$file" &> /dev/null
-        if [[ "$boot" = root ]]; then
-            # Symlink files if /boot resides on the same partition as root
-            ln -sf "${bios_libpath#$CHROOT}/$file" "$bios_bootpath/$file" &> /dev/null
-        elif [[ "$boot" = boot ]]; then
-            cp "$bios_libpath/$file" "$bios_bootpath/$file"
-        fi
-    done
-
-    # Copy / Symlink pci.ids if pci.ids exists on the FS
-    if [[ -f $pciids_file ]]; then
-        rm "$bios_bootpath/pci.ids" &> /dev/null
-        if [[ "$boot" = root ]]; then
-            ln -sf "$pciids_file" "$bios_bootpath/pci.ids" &> /dev/null
-        elif [[ "$boot" = boot ]]; then
-            cp "$pciids_file" "$bios_bootpath/pci.ids" &> /dev/null
-        fi
-    fi
-}
-
-_install() {
-    install_modules
-
-    if device_is_raid "$bootpart"; then
-        echo "Detected RAID on /boot"
-        "$EXTLINUX" --install "$bios_bootpath" --raid &> /dev/null
-    else
-        "$EXTLINUX" --install "$bios_bootpath" &> /dev/null
-    fi
-
-    if (( $? )); then
-        echo "Syslinux BIOS install failed"
-        exit 2
-    else
-        echo "Syslinux BIOS install successful"
-    fi
-
-    touch "$CHROOT/$bios_autoupdate_file"
-}
-
-update() {
-    install_modules
-
-    if device_is_raid $bootpart; then
-        echo "Detected RAID on /boot"
-        "$EXTLINUX" --update "$bios_bootpath" --raid &> /dev/null
-    else
-        "$EXTLINUX" --update "$bios_bootpath" &> /dev/null
-    fi
-
-    if (($?)); then
-        echo "Syslinux BIOS update failed"
-        exit 2
-    else
-        echo "Syslinux BIOS update successful"
-    fi
-}
-
-if (( $# == 0 )); then
-    usage
-    exit 1
-fi
-
-while getopts "c:uihmas" opt; do
-    case $opt in
-        c)
-            CHROOT=$(readlink -e "$OPTARG")
-            if [[ -z $CHROOT ]]; then
-                echo "error: chroot path ``$OPTARG does not exist";
-                exit 1
-            fi
-            ;;
-        h)
-            USAGE="True"
-            ;;
-        i)
-            INSTALL="True"
-            ;;
-        u)
-            UPDATE="True"
-            ;;
-        m)
-            MBR="True"
-            ;;
-        a)
-            SET_ACTIVE="True"
-            ;;
-        s)
-            # If AUTOUPDATE_FILE does not exist exit the script
-            if [[ -f $bios_autoupdate_file ]]; then
-                UPDATE="True"
-            else
-                exit 0
-            fi
-            ;;
-        *)
-            usage
-            exit 1
-            ;;
-    esac
-done
-
-if [[ $USAGE ]]; then
-    usage
-    exit 0
-fi
-
-# Make sure only root can run our script
-if (( $(id -u) != 0 )); then
-    echo "This script must be run as root" 1>&2
-    exit 1
-fi
-
-# Display Usage Information if both Install and Update are passed
-if [[ $INSTALL && $UPDATE ]]; then
-    usage
-    exit 1
-fi
-
-# If a chroot dir is path set variables to reflect chroot
-if [[ "$CHROOT" ]]; then
-    bios_libpath="$CHROOT$bios_libpath"
-    bios_bootpath="$CHROOT$bios_bootpath"
-    EXTLINUX="$CHROOT$EXTLINUX"
-fi
-
-# Exit if no /boot path exists
-if ( f=("$bios_bootpath"/*); (( ! ${#f[@]} )) ); then
-    echo "Error: $bios_bootpath is empty!"
-    echo "Is /boot mounted?"
-    exit 1
-fi
-
-# Get the boot device if any of these options are passed
-if [[ $INSTALL || $UPDATE || $SET_ACTIVE || $MBR ]]; then
-    getBoot
-fi
-
-# Install or Update
-if [[ $INSTALL ]]; then
-    _install || exit
-elif [[ $UPDATE ]]; then
-    update || exit
-fi
-
-
-# SET_ACTIVE and MBR
-if [[ $SET_ACTIVE ]] || [[ $MBR ]]; then
-    get_boot_devices
-
-    if [[ $SET_ACTIVE ]]; then
-        set_active || exit
-    fi
-
-    if [[ $MBR ]]; then
-        install_mbr || exit
-    fi
-fi
-
-exit 0
-
-# vim: set et sw=4:
diff --git a/libre-testing/syslinux/syslinux.cfg b/libre-testing/syslinux/syslinux.cfg
deleted file mode 100644
index 0c0c6339a..000000000
--- a/libre-testing/syslinux/syslinux.cfg
+++ /dev/null
@@ -1,78 +0,0 @@
-# Config file for Syslinux -
-# /boot/syslinux/syslinux.cfg
-#
-# Comboot modules:
-#   * menu.c32 - provides a text menu
-#   * vesamenu.c32 - provides a graphical menu
-#   * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
-#   * hdt.c32 - hardware detection tool
-#   * reboot.c32 - reboots the system
-#
-# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
-# If /usr and /boot are on the same file system, symlink the files instead
-# of copying them.
-#
-# If you do not use a menu, a 'boot:' prompt will be shown and the system
-# will boot automatically after 5 seconds.
-#
-# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
-# The wiki provides further configuration examples
-
-DEFAULT parabola
-PROMPT 0        # Set to 1 if you always want to display the boot: prompt
-TIMEOUT 50
-# You can create syslinux keymaps with the keytab-lilo tool
-#KBDMAP de.ktl
-
-# Menu Configuration
-# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux 
-#UI menu.c32
-UI vesamenu.c32
-
-# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
-MENU TITLE Parabola GNU/Linux-libre
-MENU BACKGROUND splash.png
-MENU COLOR border       35;40   #ff777caa #a0000000 std
-MENU COLOR title        1;35;40 #ff777caa #a0000000 std
-MENU COLOR sel          7;35;47 #e0ffffff #20777caa all
-MENU COLOR unsel        35;40   #ff777caa #a0000000 std
-MENU COLOR help         35;40   #c0b2b2b2 #a0000000 std
-MENU COLOR timeout_msg  35;40   #ff777caa #00000000 std
-MENU COLOR timeout      1;35;40 #ff777caa #00000000 std
-MENU COLOR msg07        35;40   #ff777caa #a0000000 std
-MENU COLOR tabmsg       35;40   #ff777caa #00000000 std
-
-# boot sections follow
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-
-LABEL parabola
-    MENU LABEL Parabola GNU/Linux-libre
-    LINUX ../vmlinuz-linux-libre
-    APPEND root=/dev/sda3 rw
-    INITRD ../initramfs-linux-libre.img
-
-LABEL parabolafallback
-    MENU LABEL Parabola GNU/Linux-libre Fallback
-    LINUX ../vmlinuz-linux-libre
-    APPEND root=/dev/sda3 rw
-    INITRD ../initramfs-linux-libre-fallback.img
-
-# If you want Memtest on syslinux, use this LABEL section to launch it (install the memtest86+ package)
-#    LABEL memtest
-#    MENU LABEL Memtest86+
-#    LINUX ../memtest86+/memtest.bin
-
-LABEL hdt
-        MENU LABEL HDT (Hardware Detection Tool)
-        COM32 hdt.c32
-
-LABEL reboot
-        MENU LABEL Reboot
-        COM32 reboot.c32
-
-LABEL poweroff
-        MENU LABEL Poweroff
-        COM32 poweroff.c32
diff --git a/libre-testing/syslinux/syslinux.install b/libre-testing/syslinux/syslinux.install
deleted file mode 100644
index ac8553a97..000000000
--- a/libre-testing/syslinux/syslinux.install
+++ /dev/null
@@ -1,36 +0,0 @@
-post_install() {
-  echo "==> If you want to use syslinux as your BIOS bootloader"
-  echo "==> edit /boot/syslinux/syslinux.cfg and run"
-  echo "==>   # /usr/bin/syslinux-install_update -i -a -m"
-  echo "==> to install it."
-  
-  cat << EOF
-Syslinux efi64 and efi32 files have been installed at
-/usr/lib/syslinux/{efi64,efi32}/ respectively.
-
-To install, copy /usr/lib/syslinux/efi64 to (ESP)/EFI/syslinux and
-syslinux.cfg to (ESP)/EFI/syslinux/syslinux.cfg and add a boot entry
-using efibootmgr for (ESP)/EFI/syslinux/syslinux.efi
-EOF
-
-}
-
-post_upgrade() {
-  # auto-update syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists
-  /usr/bin/syslinux-install_update -s
-  # update to 5.01 message
-  if [ "$(vercmp $2 5.01)" -lt 0 ]; then
-      echo "If you used syslinux-install_update to install syslinux:"
-      echo "==> If you want to use syslinux with menu and all modules please rerun" 
-      echo "==>   # /usr/bin/syslinux-install_update -i -a -m"
-      echo ""
-      echo "If you manually installed syslinux:"
-      echo "==> Please copy or symlink all .c32 modules to your /boot/syslinux directory."
-      echo "==> If (/ and /boot on seperate fs):"
-      echo "==>   # cp /usr/lib/syslinux/bios/*.c32 /boot/syslinux"
-      echo "==> If (/ and /boot on same fs):"
-      echo "==>   # ln -s /usr/lib/syslinux/bios/*.c32 /boot/syslinux"
-  fi
-}
-
-# vim:set ts=2 sw=2 et: