linux-libre-lts-knock-4.4.7_gnu-1: updating version

1 files changed, 0 insertions, 256 deletions

diff --git a/kernels/linux-libre-lts-knock/0002-ARM-sun5i-Add-CHIP-DTS.patch b/kernels/linux-libre-lts-knock/0002-ARM-sun5i-Add-CHIP-DTS.patch
deleted file mode 100644
index 7db5ff94f..000000000
--- a/kernels/linux-libre-lts-knock/0002-ARM-sun5i-Add-CHIP-DTS.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-From 465a225fb2afb3ebf1becbe76d46b084d46f30a5 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 9 Jun 2015 19:38:43 +0200
-Subject: [PATCH 2/5] ARM: sun5i: Add C.H.I.P DTS
-
-The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of
-RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack
-and two connectors to plug additional boards on top of it.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Reviewed-by: André Silva <emulatorman@parabola.nu>
----
- arch/arm/boot/dts/Makefile          |   3 +-
- arch/arm/boot/dts/sun5i-r8-chip.dts | 214 ++++++++++++++++++++++++++++++++++++
- 2 files changed, 216 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/sun5i-r8-chip.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 992736b..f8d18bd 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -540,7 +540,8 @@ dtb-$(CONFIG_MACH_SUN5I) += \
- 	sun5i-a10s-r7-tv-dongle.dtb \
- 	sun5i-a13-hsg-h702.dtb \
- 	sun5i-a13-olinuxino.dtb \
--	sun5i-a13-olinuxino-micro.dtb
-+	sun5i-a13-olinuxino-micro.dtb \
-+	sun5i-r8-chip.dtb
- dtb-$(CONFIG_MACH_SUN6I) += \
- 	sun6i-a31-app4-evb1.dtb \
- 	sun6i-a31-colombus.dtb \
-diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
-new file mode 100644
-index 0000000..abf3ccb
---- /dev/null
-+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
-@@ -0,0 +1,214 @@
-+/*
-+ * Copyright 2015 Free Electrons
-+ * Copyright 2015 NextThing Co
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun5i-r8.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+
-+/ {
-+	model = "NextThing C.H.I.P.";
-+	compatible = "nextthing,chip", "allwinner,sun5i-r8";
-+
-+	aliases {
-+		i2c0 = &i2c0;
-+		i2c2 = &i2c2;
-+		serial0 = &uart1;
-+		serial1 = &uart3;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins_a>;
-+	status = "okay";
-+
-+	axp209: pmic@34 {
-+		reg = <0x34>;
-+
-+		/*
-+		 * The interrupt is routed through the "External Fast
-+		 * Interrupt Request" pin (ball G13 of the module)
-+		 * directly to the main interrupt controller, without
-+		 * any other controller interfering.
-+		 */
-+		interrupts = <0>;
-+	};
-+};
-+
-+#include "axp209.dtsi"
-+
-+&i2c2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_pins_a>;
-+	status = "okay";
-+
-+	xio: gpio@38 {
-+		compatible = "nxp,pcf8574a";
-+		reg = <0x38>;
-+
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
-+		interrupt-controller;
-+		#interrupt-cells = <2>;
-+	};
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&otg_sram {
-+	status = "okay";
-+};
-+
-+&pio {
-+	chip_vbus_pin: chip_vbus_pin@0 {
-+		allwinner,pins = "PB10";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	chip_id_det_pin: chip_id_det_pin@0 {
-+		allwinner,pins = "PG2";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+};
-+
-+&reg_dcdc2 {
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1400000>;
-+	regulator-name = "cpuvdd";
-+	regulator-always-on;
-+};
-+
-+&reg_dcdc3 {
-+	regulator-min-microvolt = <1000000>;
-+	regulator-max-microvolt = <1300000>;
-+	regulator-name = "corevdd";
-+	regulator-always-on;
-+};
-+
-+&reg_ldo1 {
-+	regulator-name = "rtcvdd";
-+};
-+
-+&reg_ldo2 {
-+	regulator-min-microvolt = <2700000>;
-+	regulator-max-microvolt = <3300000>;
-+	regulator-name = "avcc";
-+	regulator-always-on;
-+};
-+
-+&reg_ldo5 {
-+	regulator-min-microvolt = <1800000>;
-+	regulator-max-microvolt = <1800000>;
-+	regulator-name = "vcc-1v8";
-+};
-+
-+&reg_usb0_vbus {
-+	pinctrl-0 = <&chip_vbus_pin>;
-+	vin-supply = <&reg_vcc5v0>;
-+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins_b>;
-+	status = "okay";
-+};
-+
-+&uart3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart3_pins_a>,
-+		    <&uart3_pins_cts_rts_a>;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	dr_mode = "otg";
-+	status = "okay";
-+};
-+
-+&usb_power_supply {
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&chip_id_det_pin>;
-+	status = "okay";
-+
-+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-+	usb0_vbus_power-supply = <&usb_power_supply>;
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
-+	usb1_vbus-supply = <&reg_vcc5v0>;
-+};
--- 
-cgit v0.12
-