linux-libre-lts{,-knock}: add more patches and adapt sun5i-r8.dtsi for 4.1 kernels

22 files changed, 2756 insertions, 182 deletions

diff --git a/kernels/linux-libre-lts-knock/0001-ARM-sunxi-Add-R8-support.patch b/kernels/linux-libre-lts-knock/0001-ARM-sunxi-Add-R8-support.patch
index 9f685790e..4d8194026 100644
--- a/kernels/linux-libre-lts-knock/0001-ARM-sunxi-Add-R8-support.patch
+++ b/kernels/linux-libre-lts-knock/0001-ARM-sunxi-Add-R8-support.patch
@@ -1,7 +1,7 @@
 From bef6229f36c1c2ddae186f4e328c2359c1dad18d Mon Sep 17 00:00:00 2001
 From: Maxime Ripard <maxime.ripard@free-electrons.com>
 Date: Tue, 9 Jun 2015 19:38:04 +0200
-Subject: [PATCH 1/3] ARM: sunxi: Add R8 support
+Subject: [PATCH 1/9] ARM: sunxi: Add R8 support
 
 The R8 is a new Allwinner SoC based on the A13. While both are very
 similar, there's still a few differences. Introduce a new compatible to
diff --git a/kernels/linux-libre-lts-knock/0002-ARM-sun5i-Add-CHIP-DTS.patch b/kernels/linux-libre-lts-knock/0002-ARM-sun5i-Add-CHIP-DTS.patch
index 2ca192730..296182aa7 100644
--- a/kernels/linux-libre-lts-knock/0002-ARM-sun5i-Add-CHIP-DTS.patch
+++ b/kernels/linux-libre-lts-knock/0002-ARM-sun5i-Add-CHIP-DTS.patch
@@ -1,7 +1,7 @@
 From 465a225fb2afb3ebf1becbe76d46b084d46f30a5 Mon Sep 17 00:00:00 2001
 From: Maxime Ripard <maxime.ripard@free-electrons.com>
 Date: Tue, 9 Jun 2015 19:38:43 +0200
-Subject: [PATCH 2/3] ARM: sun5i: Add C.H.I.P DTS
+Subject: [PATCH 2/9] ARM: sun5i: Add C.H.I.P DTS
 
 The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of
 RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack
diff --git a/kernels/linux-libre-lts-knock/0003-ARM-sun5i-Add-R8-DTSI.patch b/kernels/linux-libre-lts-knock/0003-ARM-sun5i-Add-R8-DTSI.patch
deleted file mode 100644
index bfa01eaa8..000000000
--- a/kernels/linux-libre-lts-knock/0003-ARM-sun5i-Add-R8-DTSI.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 49e4f3c3271e7eff2800596ba168c932d7d702b8 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 18 Sep 2015 09:09:34 +0200
-Subject: [PATCH 3/3] ARM: sun5i: Add R8 DTSI
-
-The R8 is very close to the A13, but it still has a few differences,
-notably a composite output, which the A13 lacks.
-
-Add a DTSI based on the A13's to hold those differences.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Reviewed-by: Chen-Yu Tsai <wens@csie.org>
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-r8.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 59 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun5i-r8.dtsi
-
-diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
-new file mode 100644
-index 0000000..0ef8656
---- /dev/null
-+++ b/arch/arm/boot/dts/sun5i-r8.dtsi
-@@ -0,0 +1,59 @@
-+/*
-+ * Copyright 2015 Free Electrons
-+ * Copyright 2015 NextThing Co
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sun5i-a13.dtsi"
-+
-+/ {
-+	chosen {
-+		framebuffer@1 {
-+			compatible = "allwinner,simple-framebuffer",
-+				     "simple-framebuffer";
-+			allwinner,pipeline = "de_be0-lcd0-tve0";
-+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-+				 <&ahb_gates 44>;
-+			status = "disabled";
-+		};
-+	};
-+};
--- 
-cgit v0.12
-
diff --git a/kernels/linux-libre-lts-knock/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch b/kernels/linux-libre-lts-knock/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch
new file mode 100644
index 000000000..e9b2c566c
--- /dev/null
+++ b/kernels/linux-libre-lts-knock/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch
@@ -0,0 +1,32 @@
+From e54693ed82ae0fee934a21328536751afd293c80 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Tue, 28 Jul 2015 10:37:01 +0200
+Subject: [PATCH 3/9] ARM: sun5i: chip: Enable the audio codec
+
+The CHIP v0.2 has a composite output on a mini-jack connector, the audio
+part being provided by the on-SoC codec. Enable it.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm/boot/dts/sun5i-r8-chip.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
+index abf3ccb..530ab28 100644
+--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
++++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
+@@ -66,6 +66,10 @@
+ 	};
+ };
+ 
++&codec {
++	status = "okay";
++};
++
+ &ehci0 {
+ 	status = "okay";
+ };
+-- 
+cgit v0.12
+
diff --git a/kernels/linux-libre-lts-knock/0004-ARM-sun5i-Add-R8-DTSI.patch b/kernels/linux-libre-lts-knock/0004-ARM-sun5i-Add-R8-DTSI.patch
new file mode 100644
index 000000000..5c97fd48c
--- /dev/null
+++ b/kernels/linux-libre-lts-knock/0004-ARM-sun5i-Add-R8-DTSI.patch
@@ -0,0 +1,779 @@
+From 49e4f3c3271e7eff2800596ba168c932d7d702b8 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Fri, 18 Sep 2015 09:09:34 +0200
+Subject: [PATCH 4/9] ARM: sun5i: Add R8 DTSI
+
+The R8 is very close to the A13, but it still has a few differences,
+notably a composite output, which the A13 lacks.
+
+Add a DTSI based on the A13's to hold those differences.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+Reviewed-by: Hans de Goede <hdegoede@redhat.com>
+Reviewed-by: André Silva <emulatorman@parabola.nu>
+Reviewed-by: Márcio Silva <coadde@parabola.nu>
+---
+ arch/arm/boot/dts/sun5i-r8.dtsi | 750 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 750 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun5i-r8.dtsi
+
+diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
+new file mode 100644
+index 0000000..75a9960
+--- /dev/null
++++ b/arch/arm/boot/dts/sun5i-r8.dtsi
+@@ -0,0 +1,750 @@
++/*
++ * Copyright 2015 Free Electrons
++ * Copyright 2015 NextThing Co
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include "skeleton.dtsi"
++
++#include <dt-bindings/thermal/thermal.h>
++
++#include <dt-bindings/clock/sun4i-a10-pll2.h>
++#include <dt-bindings/dma/sun4i-a10.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++	interrupt-parent = <&intc>;
++
++	chosen {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++
++		framebuffer@0 {
++			compatible = "allwinner,simple-framebuffer",
++				     "simple-framebuffer";
++			allwinner,pipeline = "de_be0-lcd0";
++			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
++			status = "disabled";
++		};
++
++		framebuffer@1 {
++			compatible = "allwinner,simple-framebuffer",
++				     "simple-framebuffer";
++			allwinner,pipeline = "de_be0-lcd0-tve0";
++			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
++				 <&ahb_gates 44>;
++			status = "disabled";
++		};
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		cpu0: cpu@0 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a8";
++			reg = <0x0>;
++			clocks = <&cpu>;
++			clock-latency = <244144>; /* 8 32k periods */
++			operating-points = <
++				/* kHz    uV */
++				1008000 1400000
++				912000  1350000
++				864000  1300000
++				624000  1200000
++				576000  1200000
++				432000  1200000
++				>;
++			#cooling-cells = <2>;
++			cooling-min-level = <0>;
++			cooling-max-level = <5>;
++		};
++	};
++
++	thermal-zones {
++		cpu_thermal {
++			/* milliseconds */
++			polling-delay-passive = <250>;
++			polling-delay = <1000>;
++			thermal-sensors = <&rtp>;
++
++			cooling-maps {
++				map0 {
++					trip = <&cpu_alert0>;
++					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
++				};
++			};
++
++			trips {
++				cpu_alert0: cpu_alert0 {
++					/* milliCelsius */
++					temperature = <850000>;
++					hysteresis = <2000>;
++					type = "passive";
++				};
++
++				cpu_crit: cpu_crit {
++					/* milliCelsius */
++					temperature = <100000>;
++					hysteresis = <2000>;
++					type = "critical";
++				};
++			};
++		};
++	};
++
++	memory {
++		reg = <0x40000000 0x20000000>;
++	};
++
++	clocks {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++
++		/*
++		 * This is a dummy clock, to be used as placeholder on
++		 * other mux clocks when a specific parent clock is not
++		 * yet implemented. It should be dropped when the driver
++		 * is complete.
++		 */
++		dummy: dummy {
++			#clock-cells = <0>;
++			compatible = "fixed-clock";
++			clock-frequency = <0>;
++		};
++
++		osc24M: clk@01c20050 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-osc-clk";
++			reg = <0x01c20050 0x4>;
++			clock-frequency = <24000000>;
++			clock-output-names = "osc24M";
++		};
++
++		osc32k: clk@0 {
++			#clock-cells = <0>;
++			compatible = "fixed-clock";
++			clock-frequency = <32768>;
++			clock-output-names = "osc32k";
++		};
++
++		pll1: clk@01c20000 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-pll1-clk";
++			reg = <0x01c20000 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll1";
++		};
++
++		pll2: clk@01c20008 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-pll2-clk";
++			reg = <0x01c20008 0x8>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll2-1x", "pll2-2x",
++					     "pll2-4x", "pll2-8x";
++		};
++
++		pll4: clk@01c20018 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-pll1-clk";
++			reg = <0x01c20018 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll4";
++		};
++
++		pll5: clk@01c20020 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-pll5-clk";
++			reg = <0x01c20020 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll5_ddr", "pll5_other";
++		};
++
++		pll6: clk@01c20028 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-pll6-clk";
++			reg = <0x01c20028 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll6_sata", "pll6_other", "pll6";
++		};
++
++		/* dummy is 200M */
++		cpu: cpu@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-cpu-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
++			clock-output-names = "cpu";
++		};
++
++		axi: axi@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-axi-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&cpu>;
++			clock-output-names = "axi";
++		};
++
++		axi_gates: clk@01c2005c {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-axi-gates-clk";
++			reg = <0x01c2005c 0x4>;
++			clocks = <&axi>;
++			clock-output-names = "axi_dram";
++		};
++
++		ahb: ahb@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-ahb-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&axi>;
++			clock-output-names = "ahb";
++		};
++
++		ahb_gates: clk@01c20060 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
++			reg = <0x01c20060 0x8>;
++			clocks = <&ahb>;
++			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
++				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
++				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
++				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
++				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
++				"ahb_de_fe", "ahb_iep", "ahb_mali400";
++		};
++
++		apb0: apb0@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-apb0-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&ahb>;
++			clock-output-names = "apb0";
++		};
++
++		apb0_gates: clk@01c20068 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
++			reg = <0x01c20068 0x4>;
++			clocks = <&apb0>;
++			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
++		};
++
++		apb1: clk@01c20058 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-apb1-clk";
++			reg = <0x01c20058 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
++			clock-output-names = "apb1";
++		};
++
++		apb1_gates: clk@01c2006c {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
++			reg = <0x01c2006c 0x4>;
++			clocks = <&apb1>;
++			clock-output-names = "apb1_i2c0", "apb1_i2c1",
++				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
++		};
++
++		nand_clk: clk@01c20080 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c20080 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "nand";
++		};
++
++		ms_clk: clk@01c20084 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c20084 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ms";
++		};
++
++		mmc0_clk: clk@01c20088 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-mmc-clk";
++			reg = <0x01c20088 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mmc0",
++					     "mmc0_output",
++					     "mmc0_sample";
++		};
++
++		mmc1_clk: clk@01c2008c {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-mmc-clk";
++			reg = <0x01c2008c 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mmc1",
++					     "mmc1_output",
++					     "mmc1_sample";
++		};
++
++		mmc2_clk: clk@01c20090 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-mmc-clk";
++			reg = <0x01c20090 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mmc2",
++					     "mmc2_output",
++					     "mmc2_sample";
++		};
++
++		ts_clk: clk@01c20098 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c20098 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ts";
++		};
++
++		ss_clk: clk@01c2009c {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c2009c 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ss";
++		};
++
++		spi0_clk: clk@01c200a0 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200a0 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "spi0";
++		};
++
++		spi1_clk: clk@01c200a4 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200a4 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "spi1";
++		};
++
++		spi2_clk: clk@01c200a8 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200a8 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "spi2";
++		};
++
++		ir0_clk: clk@01c200b0 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200b0 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ir0";
++		};
++
++		usb_clk: clk@01c200cc {
++			#clock-cells = <1>;
++		        #reset-cells = <1>;
++			compatible = "allwinner,sun5i-a13-usb-clk";
++			reg = <0x01c200cc 0x4>;
++			clocks = <&pll6 1>;
++			clock-output-names = "usb_ohci0", "usb_phy";
++		};
++
++		codec_clk: clk@01c20140 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-codec-clk";
++			reg = <0x01c20140 0x4>;
++			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
++			clock-output-names = "codec";
++		};
++
++		mbus_clk: clk@01c2015c {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun5i-a13-mbus-clk";
++			reg = <0x01c2015c 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mbus";
++		};
++	};
++
++	soc@01c00000 {
++		compatible = "simple-bus";
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++
++		sram-controller@01c00000 {
++			compatible = "allwinner,sun4i-a10-sram-controller";
++			reg = <0x01c00000 0x30>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			ranges;
++
++			sram_a: sram@00000000 {
++				compatible = "mmio-sram";
++				reg = <0x00000000 0xc000>;
++				#address-cells = <1>;
++				#size-cells = <1>;
++				ranges = <0 0x00000000 0xc000>;
++			};
++
++			sram_d: sram@00010000 {
++				compatible = "mmio-sram";
++				reg = <0x00010000 0x1000>;
++				#address-cells = <1>;
++				#size-cells = <1>;
++				ranges = <0 0x00010000 0x1000>;
++
++				otg_sram: sram-section@0000 {
++					compatible = "allwinner,sun4i-a10-sram-d";
++					reg = <0x0000 0x1000>;
++					status = "disabled";
++				};
++			};
++		};
++
++		dma: dma-controller@01c02000 {
++			compatible = "allwinner,sun4i-a10-dma";
++			reg = <0x01c02000 0x1000>;
++			interrupts = <27>;
++			clocks = <&ahb_gates 6>;
++			#dma-cells = <2>;
++		};
++
++		spi0: spi@01c05000 {
++			compatible = "allwinner,sun4i-a10-spi";
++			reg = <0x01c05000 0x1000>;
++			interrupts = <10>;
++			clocks = <&ahb_gates 20>, <&spi0_clk>;
++			clock-names = "ahb", "mod";
++			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
++			       <&dma SUN4I_DMA_DEDICATED 26>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		spi1: spi@01c06000 {
++			compatible = "allwinner,sun4i-a10-spi";
++			reg = <0x01c06000 0x1000>;
++			interrupts = <11>;
++			clocks = <&ahb_gates 21>, <&spi1_clk>;
++			clock-names = "ahb", "mod";
++			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
++			       <&dma SUN4I_DMA_DEDICATED 8>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		mmc0: mmc@01c0f000 {
++			compatible = "allwinner,sun5i-a13-mmc";
++			reg = <0x01c0f000 0x1000>;
++			clocks = <&ahb_gates 8>,
++				 <&mmc0_clk 0>,
++				 <&mmc0_clk 1>,
++				 <&mmc0_clk 2>;
++			clock-names = "ahb",
++				      "mmc",
++				      "output",
++				      "sample";
++			interrupts = <32>;
++			status = "disabled";
++		};
++
++		mmc2: mmc@01c11000 {
++			compatible = "allwinner,sun5i-a13-mmc";
++			reg = <0x01c11000 0x1000>;
++			clocks = <&ahb_gates 10>,
++				 <&mmc2_clk 0>,
++				 <&mmc2_clk 1>,
++				 <&mmc2_clk 2>;
++			clock-names = "ahb",
++				      "mmc",
++				      "output",
++				      "sample";
++			interrupts = <34>;
++			status = "disabled";
++		};
++
++		usb_otg: usb@01c13000 {
++			compatible = "allwinner,sun4i-a10-musb";
++			reg = <0x01c13000 0x0400>;
++			clocks = <&ahb_gates 0>;
++			interrupts = <38>;
++			interrupt-names = "mc";
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			extcon = <&usbphy 0>;
++			allwinner,sram = <&otg_sram 1>;
++			status = "disabled";
++		};
++
++		usbphy: phy@01c13400 {
++			#phy-cells = <1>;
++			compatible = "allwinner,sun5i-a13-usb-phy";
++			reg = <0x01c13400 0x10 0x01c14800 0x4>;
++			reg-names = "phy_ctrl", "pmu1";
++			clocks = <&usb_clk 8>;
++			clock-names = "usb_phy";
++			resets = <&usb_clk 0>, <&usb_clk 1>;
++			reset-names = "usb0_reset", "usb1_reset";
++			status = "disabled";
++		};
++
++		ehci0: usb@01c14000 {
++			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
++			reg = <0x01c14000 0x100>;
++			interrupts = <39>;
++			clocks = <&ahb_gates 1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci0: usb@01c14400 {
++			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
++			reg = <0x01c14400 0x100>;
++			interrupts = <40>;
++			clocks = <&usb_clk 6>, <&ahb_gates 2>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		spi2: spi@01c17000 {
++			compatible = "allwinner,sun4i-a10-spi";
++			reg = <0x01c17000 0x1000>;
++			interrupts = <12>;
++			clocks = <&ahb_gates 22>, <&spi2_clk>;
++			clock-names = "ahb", "mod";
++			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
++			       <&dma SUN4I_DMA_DEDICATED 28>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		intc: interrupt-controller@01c20400 {
++			compatible = "allwinner,sun4i-a10-ic";
++			reg = <0x01c20400 0x400>;
++			interrupt-controller;
++			#interrupt-cells = <1>;
++		};
++
++		pio: pinctrl@01c20800 {
++			compatible = "allwinner,sun5i-a13-pinctrl";
++			reg = <0x01c20800 0x400>;
++			interrupts = <28>;
++			clocks = <&apb0_gates 5>;
++			gpio-controller;
++			interrupt-controller;
++			#interrupt-cells = <2>;
++			#size-cells = <0>;
++			#gpio-cells = <3>;
++
++			uart1_pins_a: uart1@0 {
++				allwinner,pins = "PE10", "PE11";
++				allwinner,function = "uart1";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			uart1_pins_b: uart1@1 {
++				allwinner,pins = "PG3", "PG4";
++				allwinner,function = "uart1";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			uart3_pins_a: uart3@0 {
++				allwinner,pins = "PG9", "PG10";
++				allwinner,function = "uart3";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			uart3_pins_cts_rts_a: uart3-cts-rts@0 {
++				allwinner,pins = "PG11", "PG12";
++				allwinner,function = "uart3";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			i2c0_pins_a: i2c0@0 {
++				allwinner,pins = "PB0", "PB1";
++				allwinner,function = "i2c0";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			i2c1_pins_a: i2c1@0 {
++				allwinner,pins = "PB15", "PB16";
++				allwinner,function = "i2c1";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			i2c2_pins_a: i2c2@0 {
++				allwinner,pins = "PB17", "PB18";
++				allwinner,function = "i2c2";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			mmc0_pins_a: mmc0@0 {
++				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
++				allwinner,function = "mmc0";
++				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++		};
++
++		timer@01c20c00 {
++			compatible = "allwinner,sun4i-a10-timer";
++			reg = <0x01c20c00 0x90>;
++			interrupts = <22>;
++			clocks = <&osc24M>;
++		};
++
++		wdt: watchdog@01c20c90 {
++			compatible = "allwinner,sun4i-a10-wdt";
++			reg = <0x01c20c90 0x10>;
++		};
++
++		lradc: lradc@01c22800 {
++			compatible = "allwinner,sun4i-a10-lradc-keys";
++			reg = <0x01c22800 0x100>;
++			interrupts = <31>;
++			status = "disabled";
++		};
++
++		codec: codec@01c22c00 {
++			#sound-dai-cells = <0>;
++			compatible = "allwinner,sun4i-a10-codec";
++			reg = <0x01c22c00 0x40>;
++			interrupts = <30>;
++			clocks = <&apb0_gates 0>, <&codec_clk>;
++			clock-names = "apb", "codec";
++			dmas = <&dma SUN4I_DMA_NORMAL 19>,
++			       <&dma SUN4I_DMA_NORMAL 19>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++		};
++
++		sid: eeprom@01c23800 {
++			compatible = "allwinner,sun4i-a10-sid";
++			reg = <0x01c23800 0x10>;
++		};
++
++		rtp: rtp@01c25000 {
++			compatible = "allwinner,sun4i-a10-ts";
++			reg = <0x01c25000 0x100>;
++			interrupts = <29>;
++			#thermal-sensor-cells = <0>;
++		};
++
++		uart1: serial@01c28400 {
++			compatible = "snps,dw-apb-uart";
++			reg = <0x01c28400 0x400>;
++			interrupts = <2>;
++			reg-shift = <2>;
++			reg-io-width = <4>;
++			clocks = <&apb1_gates 17>;
++			status = "disabled";
++		};
++
++		uart3: serial@01c28c00 {
++			compatible = "snps,dw-apb-uart";
++			reg = <0x01c28c00 0x400>;
++			interrupts = <4>;
++			reg-shift = <2>;
++			reg-io-width = <4>;
++			clocks = <&apb1_gates 19>;
++			status = "disabled";
++		};
++
++		i2c0: i2c@01c2ac00 {
++			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
++			reg = <0x01c2ac00 0x400>;
++			interrupts = <7>;
++			clocks = <&apb1_gates 0>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		i2c1: i2c@01c2b000 {
++			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
++			reg = <0x01c2b000 0x400>;
++			interrupts = <8>;
++			clocks = <&apb1_gates 1>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		i2c2: i2c@01c2b400 {
++			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
++			reg = <0x01c2b400 0x400>;
++			interrupts = <9>;
++			clocks = <&apb1_gates 2>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		timer@01c60000 {
++			compatible = "allwinner,sun5i-a13-hstimer";
++			reg = <0x01c60000 0x1000>;
++			interrupts = <82>, <83>;
++			clocks = <&ahb_gates 28>;
++		};
++	};
++};
+-- 
+cgit v0.12
+
diff --git a/kernels/linux-libre-lts-knock/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch b/kernels/linux-libre-lts-knock/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch
new file mode 100644
index 000000000..e1c185e0e
--- /dev/null
+++ b/kernels/linux-libre-lts-knock/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch
@@ -0,0 +1,299 @@
+From 460d0d444822e9032a2573fc051b45c68b89a97a Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Fri, 18 Jul 2014 15:48:35 -0300
+Subject: [PATCH 5/9] clk: sunxi: Add a driver for the PLL2
+
+The PLL2 on the A10 and later SoCs is the clock used for all the audio
+related operations.
+
+This clock has a somewhat complex output tree, with three outputs (2X, 4X
+and 8X) with a fixed divider from the base clock, and an output (1X) with a
+post divider.
+
+However, we can simplify things since the 1X divider can be fixed, and we
+end up by having a base clock not exposed to any device (or at least
+directly, since the 4X output doesn't have any divider), and 4 fixed
+divider clocks that will be exposed.
+
+This clock seems to have been introduced, at least in this form, in the
+revision B of the A10, but we don't have any information on the clock used
+on the revision A.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+---
+ drivers/clk/sunxi/Makefile                 |   1 +
+ drivers/clk/sunxi/clk-a10-pll2.c           | 188 +++++++++++++++++++++++++++++
+ include/dt-bindings/clock/sun4i-a10-pll2.h |  53 ++++++++
+ 3 files changed, 242 insertions(+)
+ create mode 100644 drivers/clk/sunxi/clk-a10-pll2.c
+ create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h
+
+diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
+index f5a35b8..c658a18 100644
+--- a/drivers/clk/sunxi/Makefile
++++ b/drivers/clk/sunxi/Makefile
+@@ -4,6 +4,7 @@
+ 
+ obj-y += clk-sunxi.o clk-factors.o
+ obj-y += clk-a10-hosc.o
++obj-y += clk-a10-pll2.o
+ obj-y += clk-a20-gmac.o
+ obj-y += clk-mod0.o
+ obj-y += clk-simple-gates.o
+diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
+new file mode 100644
+index 0000000..a57742a
+--- /dev/null
++++ b/drivers/clk/sunxi/clk-a10-pll2.c
+@@ -0,0 +1,188 @@
++/*
++ * Copyright 2013 Emilio López
++ * Emilio López <emilio@elopez.com.ar>
++ *
++ * Copyright 2015 Maxime Ripard
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++
++#include <dt-bindings/clock/sun4i-a10-pll2.h>
++
++#define SUN4I_PLL2_ENABLE		31
++
++#define SUN4I_PLL2_PRE_DIV_SHIFT	0
++#define SUN4I_PLL2_PRE_DIV_WIDTH	5
++#define SUN4I_PLL2_PRE_DIV_MASK		GENMASK(SUN4I_PLL2_PRE_DIV_WIDTH - 1, 0)
++
++#define SUN4I_PLL2_N_SHIFT		8
++#define SUN4I_PLL2_N_WIDTH		7
++#define SUN4I_PLL2_N_MASK		GENMASK(SUN4I_PLL2_N_WIDTH - 1, 0)
++
++#define SUN4I_PLL2_POST_DIV_SHIFT	26
++#define SUN4I_PLL2_POST_DIV_WIDTH	4
++#define SUN4I_PLL2_POST_DIV_MASK	GENMASK(SUN4I_PLL2_POST_DIV_WIDTH - 1, 0)
++
++#define SUN4I_PLL2_POST_DIV_VALUE	4
++
++#define SUN4I_PLL2_OUTPUTS		4
++
++static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
++
++static void __init sun4i_pll2_setup(struct device_node *node)
++{
++	const char *clk_name = node->name, *parent;
++	struct clk **clks, *base_clk, *prediv_clk;
++	struct clk_onecell_data *clk_data;
++	struct clk_multiplier *mult;
++	struct clk_gate *gate;
++	void __iomem *reg;
++	u32 val;
++
++	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
++	if (IS_ERR(reg))
++		return;
++
++	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
++	if (!clk_data)
++		goto err_unmap;
++
++	clks = kcalloc(SUN4I_PLL2_OUTPUTS, sizeof(struct clk *), GFP_KERNEL);
++	if (!clks)
++		goto err_free_data;
++
++	parent = of_clk_get_parent_name(node, 0);
++	prediv_clk = clk_register_divider(NULL, "pll2-prediv",
++					  parent, 0, reg,
++					  SUN4I_PLL2_PRE_DIV_SHIFT,
++					  SUN4I_PLL2_PRE_DIV_WIDTH,
++					  CLK_DIVIDER_ONE_BASED |
++					  CLK_DIVIDER_ALLOW_ZERO,
++					  &sun4i_a10_pll2_lock);
++	if (!prediv_clk) {
++		pr_err("Couldn't register the prediv clock\n");
++		goto err_free_array;
++	}
++
++	/* Setup the gate part of the PLL2 */
++	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
++	if (!gate)
++		goto err_unregister_prediv;
++
++	gate->reg = reg;
++	gate->bit_idx = SUN4I_PLL2_ENABLE;
++	gate->lock = &sun4i_a10_pll2_lock;
++
++	/* Setup the multiplier part of the PLL2 */
++	mult = kzalloc(sizeof(struct clk_multiplier), GFP_KERNEL);
++	if (!mult)
++		goto err_free_gate;
++
++	mult->reg = reg;
++	mult->shift = SUN4I_PLL2_N_SHIFT;
++	mult->width = 7;
++	mult->flags = CLK_MULTIPLIER_ZERO_BYPASS |
++			CLK_MULTIPLIER_ROUND_CLOSEST;
++	mult->lock = &sun4i_a10_pll2_lock;
++
++	parent = __clk_get_name(prediv_clk);
++	base_clk = clk_register_composite(NULL, "pll2-base",
++					  &parent, 1,
++					  NULL, NULL,
++					  &mult->hw, &clk_multiplier_ops,
++					  &gate->hw, &clk_gate_ops,
++					  CLK_SET_RATE_PARENT);
++	if (!base_clk) {
++		pr_err("Couldn't register the base multiplier clock\n");
++		goto err_free_multiplier;
++	}
++
++	parent = __clk_get_name(base_clk);
++
++	/*
++	 * PLL2-1x
++	 *
++	 * This is supposed to have a post divider, but we won't need
++	 * to use it, we just need to initialise it to 4, and use a
++	 * fixed divider.
++	 */
++	val = readl(reg);
++	val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
++	val |= SUN4I_PLL2_POST_DIV_VALUE << SUN4I_PLL2_POST_DIV_SHIFT;
++	writel(val, reg);
++
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_1X, &clk_name);
++	clks[SUN4I_A10_PLL2_1X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    1,
++							    SUN4I_PLL2_POST_DIV_VALUE);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_1X]));
++
++	/*
++	 * PLL2-2x
++	 *
++	 * This clock doesn't use the post divider, and really is just
++	 * a fixed divider from the PLL2 base clock.
++	 */
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_2X, &clk_name);
++	clks[SUN4I_A10_PLL2_2X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    1, 2);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_2X]));
++
++	/* PLL2-4x */
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_4X, &clk_name);
++	clks[SUN4I_A10_PLL2_4X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    1, 1);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_4X]));
++
++	/* PLL2-8x */
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_8X, &clk_name);
++	clks[SUN4I_A10_PLL2_8X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    2, 1);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_8X]));
++
++	clk_data->clks = clks;
++	clk_data->clk_num = SUN4I_PLL2_OUTPUTS;
++	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
++
++	return;
++
++err_free_multiplier:
++	kfree(mult);
++err_free_gate:
++	kfree(gate);
++err_unregister_prediv:
++	clk_unregister_divider(prediv_clk);
++err_free_array:
++	kfree(clks);
++err_free_data:
++	kfree(clk_data);
++err_unmap:
++	iounmap(reg);
++}
++CLK_OF_DECLARE(sun4i_pll2, "allwinner,sun4i-a10-pll2-clk", sun4i_pll2_setup);
+diff --git a/include/dt-bindings/clock/sun4i-a10-pll2.h b/include/dt-bindings/clock/sun4i-a10-pll2.h
+new file mode 100644
+index 0000000..071c811
+--- /dev/null
++++ b/include/dt-bindings/clock/sun4i-a10-pll2.h
+@@ -0,0 +1,53 @@
++/*
++ * Copyright 2015 Maxime Ripard
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
++#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
++
++#define SUN4I_A10_PLL2_1X	0
++#define SUN4I_A10_PLL2_2X	1
++#define SUN4I_A10_PLL2_4X	2
++#define SUN4I_A10_PLL2_8X	3
++
++#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */
+-- 
+cgit v0.12
+
diff --git a/kernels/linux-libre-lts-knock/0006-clk-sunxi-pll2-Add-A13-support.patch b/kernels/linux-libre-lts-knock/0006-clk-sunxi-pll2-Add-A13-support.patch
new file mode 100644
index 000000000..e8c807c25
--- /dev/null
+++ b/kernels/linux-libre-lts-knock/0006-clk-sunxi-pll2-Add-A13-support.patch
@@ -0,0 +1,89 @@
+From eb662f854710e6a438789a4b0d1d0cce8c12379d Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Mon, 21 Sep 2015 13:32:43 +0200
+Subject: [PATCH 6/9] clk: sunxi: pll2: Add A13 support
+
+The A13, unlike the A10 and A20, doesn't use a pass-through exception for
+the 0 value in the pre and post dividers, but increments all the values
+written in the register by one.
+
+Add an exception for both these cases to handle them nicely.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+---
+ drivers/clk/sunxi/clk-a10-pll2.c | 38 +++++++++++++++++++++++++++++++++-----
+ 1 file changed, 33 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
+index a57742a..5484c31 100644
+--- a/drivers/clk/sunxi/clk-a10-pll2.c
++++ b/drivers/clk/sunxi/clk-a10-pll2.c
+@@ -41,9 +41,15 @@
+ 
+ #define SUN4I_PLL2_OUTPUTS		4
+ 
++struct sun4i_pll2_data {
++	u32	post_div_offset;
++	u32	pre_div_flags;
++};
++
+ static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
+ 
+-static void __init sun4i_pll2_setup(struct device_node *node)
++static void __init sun4i_pll2_setup(struct device_node *node,
++				    struct sun4i_pll2_data *data)
+ {
+ 	const char *clk_name = node->name, *parent;
+ 	struct clk **clks, *base_clk, *prediv_clk;
+@@ -70,8 +76,7 @@ static void __init sun4i_pll2_setup(struct device_node *node)
+ 					  parent, 0, reg,
+ 					  SUN4I_PLL2_PRE_DIV_SHIFT,
+ 					  SUN4I_PLL2_PRE_DIV_WIDTH,
+-					  CLK_DIVIDER_ONE_BASED |
+-					  CLK_DIVIDER_ALLOW_ZERO,
++					  data->pre_div_flags,
+ 					  &sun4i_a10_pll2_lock);
+ 	if (!prediv_clk) {
+ 		pr_err("Couldn't register the prediv clock\n");
+@@ -122,7 +127,7 @@ static void __init sun4i_pll2_setup(struct device_node *node)
+ 	 */
+ 	val = readl(reg);
+ 	val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
+-	val |= SUN4I_PLL2_POST_DIV_VALUE << SUN4I_PLL2_POST_DIV_SHIFT;
++	val |= (SUN4I_PLL2_POST_DIV_VALUE - data->post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
+ 	writel(val, reg);
+ 
+ 	of_property_read_string_index(node, "clock-output-names",
+@@ -185,4 +190,27 @@ err_free_data:
+ err_unmap:
+ 	iounmap(reg);
+ }
+-CLK_OF_DECLARE(sun4i_pll2, "allwinner,sun4i-a10-pll2-clk", sun4i_pll2_setup);
++
++static struct sun4i_pll2_data sun4i_a10_pll2_data = {
++	.pre_div_flags	= CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
++};
++
++static void __init sun4i_a10_pll2_setup(struct device_node *node)
++{
++	sun4i_pll2_setup(node, &sun4i_a10_pll2_data);
++}
++
++CLK_OF_DECLARE(sun4i_a10_pll2, "allwinner,sun4i-a10-pll2-clk",
++	       sun4i_a10_pll2_setup);
++
++static struct sun4i_pll2_data sun5i_a13_pll2_data = {
++	.post_div_offset	= 1,
++};
++
++static void __init sun5i_a13_pll2_setup(struct device_node *node)
++{
++	sun4i_pll2_setup(node, &sun5i_a13_pll2_data);
++}
++
++CLK_OF_DECLARE(sun5i_a13_pll2, "allwinner,sun5i-a13-pll2-clk",
++	       sun5i_a13_pll2_setup);
+-- 
+cgit v0.12
+
diff --git a/kernels/linux-libre-lts-knock/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch b/kernels/linux-libre-lts-knock/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch
new file mode 100644
index 000000000..82484923a
--- /dev/null
+++ b/kernels/linux-libre-lts-knock/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch
@@ -0,0 +1,34 @@
+From 5b3abbee42562a7bcdc6b589a3d8f9b5752550ed Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 22 Sep 2015 15:36:00 +0200
+Subject: [PATCH 7/9] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node
+
+Add a node representing the usb power supply part of the axp209 pmic, note
+that the usb power supply and the (to be added later) ac power supply will
+each have their own child-node, so that they can be separately specified
+as power-supply for other nodes using a power-supply property with a
+phandle pointing to the right axp209 child-node.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/axp209.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
+index 24c935c..051ab3b 100644
+--- a/arch/arm/boot/dts/axp209.dtsi
++++ b/arch/arm/boot/dts/axp209.dtsi
+@@ -89,4 +89,9 @@
+ 			regulator-name = "ldo5";
+ 		};
+ 	};
++
++	usb_power_supply: usb_power_supply {
++		compatible = "x-powers,axp202-usb-power-supply";
++		status = "disabled";
++	};
+ };
+-- 
+cgit v0.12
+
diff --git a/kernels/linux-libre-lts-knock/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch b/kernels/linux-libre-lts-knock/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch
new file mode 100644
index 000000000..fc7418ab2
--- /dev/null
+++ b/kernels/linux-libre-lts-knock/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch
@@ -0,0 +1,33 @@
+From db30fce1eea58e50ae8b2722704b4f529c394dba Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Wed, 25 Nov 2015 16:39:04 +0100
+Subject: [PATCH 8/9] ARM: sun5i: chip: Add CPU regulator for cpufreq
+
+The current DT doesn't have a phandle to the CPU regulator in the CPU node,
+which disables the CPU voltage scaling entirely.
+
+Add that phandle.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun5i-r8-chip.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
+index 530ab28..f6898c6 100644
+--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
++++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
+@@ -70,6 +70,10 @@
+ 	status = "okay";
+ };
+ 
++&cpu0 {
++	cpu-supply = <&reg_dcdc2>;
++};
++
+ &ehci0 {
+ 	status = "okay";
+ };
+-- 
+cgit v0.12
+
diff --git a/kernels/linux-libre-lts-knock/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch b/kernels/linux-libre-lts-knock/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch
new file mode 100644
index 000000000..9704d17d6
--- /dev/null
+++ b/kernels/linux-libre-lts-knock/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch
@@ -0,0 +1,92 @@
+From 59f0ec231f397001801264063db3b6dcc3eef590 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Tue, 1 Dec 2015 12:14:52 +0100
+Subject: [PATCH 9/9] clk: sunxi: pll2: Fix clock running too fast
+
+Contrary to what the datasheet says, the pre divider doesn't seem to be
+incremented by one in the PLL2, but just uses the value from the register,
+with 0 being a bypass.
+
+This fixes the audio playing too fast.
+
+Since we now have the same pre-divider flags, and the only difference with
+the A10 is the post-divider offset, also remove the structure to just pass
+the offset as an argument.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Fixes: eb662f854710 ("clk: sunxi: pll2: Add A13 support")
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/sunxi/clk-a10-pll2.c | 23 +++++------------------
+ 1 file changed, 5 insertions(+), 18 deletions(-)
+
+diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
+index 5484c31..0ee1f36 100644
+--- a/drivers/clk/sunxi/clk-a10-pll2.c
++++ b/drivers/clk/sunxi/clk-a10-pll2.c
+@@ -41,15 +41,10 @@
+ 
+ #define SUN4I_PLL2_OUTPUTS		4
+ 
+-struct sun4i_pll2_data {
+-	u32	post_div_offset;
+-	u32	pre_div_flags;
+-};
+-
+ static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
+ 
+ static void __init sun4i_pll2_setup(struct device_node *node,
+-				    struct sun4i_pll2_data *data)
++				    int post_div_offset)
+ {
+ 	const char *clk_name = node->name, *parent;
+ 	struct clk **clks, *base_clk, *prediv_clk;
+@@ -76,7 +71,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
+ 					  parent, 0, reg,
+ 					  SUN4I_PLL2_PRE_DIV_SHIFT,
+ 					  SUN4I_PLL2_PRE_DIV_WIDTH,
+-					  data->pre_div_flags,
++					  CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ 					  &sun4i_a10_pll2_lock);
+ 	if (!prediv_clk) {
+ 		pr_err("Couldn't register the prediv clock\n");
+@@ -127,7 +122,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
+ 	 */
+ 	val = readl(reg);
+ 	val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
+-	val |= (SUN4I_PLL2_POST_DIV_VALUE - data->post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
++	val |= (SUN4I_PLL2_POST_DIV_VALUE - post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
+ 	writel(val, reg);
+ 
+ 	of_property_read_string_index(node, "clock-output-names",
+@@ -191,25 +186,17 @@ err_unmap:
+ 	iounmap(reg);
+ }
+ 
+-static struct sun4i_pll2_data sun4i_a10_pll2_data = {
+-	.pre_div_flags	= CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+-};
+-
+ static void __init sun4i_a10_pll2_setup(struct device_node *node)
+ {
+-	sun4i_pll2_setup(node, &sun4i_a10_pll2_data);
++	sun4i_pll2_setup(node, 0);
+ }
+ 
+ CLK_OF_DECLARE(sun4i_a10_pll2, "allwinner,sun4i-a10-pll2-clk",
+ 	       sun4i_a10_pll2_setup);
+ 
+-static struct sun4i_pll2_data sun5i_a13_pll2_data = {
+-	.post_div_offset	= 1,
+-};
+-
+ static void __init sun5i_a13_pll2_setup(struct device_node *node)
+ {
+-	sun4i_pll2_setup(node, &sun5i_a13_pll2_data);
++	sun4i_pll2_setup(node, 1);
+ }
+ 
+ CLK_OF_DECLARE(sun5i_a13_pll2, "allwinner,sun5i-a13-pll2-clk",
+-- 
+cgit v0.12
+
diff --git a/kernels/linux-libre-lts-knock/PKGBUILD b/kernels/linux-libre-lts-knock/PKGBUILD
index 2abfb7aae..f71717338 100644
--- a/kernels/linux-libre-lts-knock/PKGBUILD
+++ b/kernels/linux-libre-lts-knock/PKGBUILD
@@ -57,7 +57,13 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/li
         "https://repo.parabola.nu/other/rcn-libre/patches/${_pkgver%-*}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch.sig"
         '0001-ARM-sunxi-Add-R8-support.patch'
         '0002-ARM-sun5i-Add-CHIP-DTS.patch'
-        '0003-ARM-sun5i-Add-R8-DTSI.patch'
+        '0003-ARM-sun5i-chip-Enable-the-audio-codec.patch'
+        '0004-ARM-sun5i-Add-R8-DTSI.patch'
+        '0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch'
+        '0006-clk-sunxi-pll2-Add-A13-support.patch'
+        '0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch'
+        '0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch'
+        '0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch'
         '0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch'
         '0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch'
         '0003-SMILE-Plug-device-tree-file.patch'
@@ -90,7 +96,10 @@ sha256sums=('48b2e5ea077d0a0bdcb205e67178e8eb5b2867db3b2364b701dbc801d9755324'
             'SKIP'
             'c30f5b73d31202d1453c15eafc933a374a9087169761cd8d9404a80591ddabb2'
             '69517e7f99bfbb8f4483162a1e76bda7f6845284476c20dbd16e074249400396'
-            '1970e32e3dc9da22c79c6ef9fe22dd4874a76a81ed1012ddfc7e83d1a2a0214b'
+            '576d0be8df3450f3a6db8ea5aba6ebda1a3417d212763a403c4df0c333ef2a9d'
+            'a359eacdb88f050b9d8b6eee9e84c7b50215ca804dbc0c2f79c2f80c7fae1b86'
+            '0621cdfa195494509c6f8d328932c0ff3523a289880c378d7c46e93ca2e6cce4'
+            'f1294da7523cbe1fb6b0ef3cb054548d8589c6e3dd64af7b8cf18a7845b68459'
             '203b07cc241f2374d1e18583fc9940cc69da134f992bff65a8b376c717aa7ea7'
             '28fb8c937c2a0dc824ea755efba26ac5a4555f9a97d79f4e31f24b23c5eae59c'
             '39bfd7f6e2df0b87b52488462edb2fbcfaf9e3eb2a974fc7b3bc22147352fece'
@@ -134,7 +143,13 @@ prepare() {
     # Parabola patches
     patch -p1 -i "${srcdir}/0001-ARM-sunxi-Add-R8-support.patch"
     patch -p1 -i "${srcdir}/0002-ARM-sun5i-Add-CHIP-DTS.patch"
-    patch -p1 -i "${srcdir}/0003-ARM-sun5i-Add-R8-DTSI.patch"
+    patch -p1 -i "${srcdir}/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch"
+    patch -p1 -i "${srcdir}/0004-ARM-sun5i-Add-R8-DTSI.patch"
+    patch -p1 -i "${srcdir}/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch"
+    patch -p1 -i "${srcdir}/0006-clk-sunxi-pll2-Add-A13-support.patch"
+    patch -p1 -i "${srcdir}/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch"
+    patch -p1 -i "${srcdir}/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch"
+    patch -p1 -i "${srcdir}/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch"
 
     # ALARM patches
     patch -p1 -i "${srcdir}/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch"
diff --git a/libre/linux-libre-lts/0001-ARM-sunxi-Add-R8-support.patch b/libre/linux-libre-lts/0001-ARM-sunxi-Add-R8-support.patch
index 9f685790e..4d8194026 100644
--- a/libre/linux-libre-lts/0001-ARM-sunxi-Add-R8-support.patch
+++ b/libre/linux-libre-lts/0001-ARM-sunxi-Add-R8-support.patch
@@ -1,7 +1,7 @@
 From bef6229f36c1c2ddae186f4e328c2359c1dad18d Mon Sep 17 00:00:00 2001
 From: Maxime Ripard <maxime.ripard@free-electrons.com>
 Date: Tue, 9 Jun 2015 19:38:04 +0200
-Subject: [PATCH 1/3] ARM: sunxi: Add R8 support
+Subject: [PATCH 1/9] ARM: sunxi: Add R8 support
 
 The R8 is a new Allwinner SoC based on the A13. While both are very
 similar, there's still a few differences. Introduce a new compatible to
diff --git a/libre/linux-libre-lts/0002-ARM-sun5i-Add-CHIP-DTS.patch b/libre/linux-libre-lts/0002-ARM-sun5i-Add-CHIP-DTS.patch
index 2ca192730..296182aa7 100644
--- a/libre/linux-libre-lts/0002-ARM-sun5i-Add-CHIP-DTS.patch
+++ b/libre/linux-libre-lts/0002-ARM-sun5i-Add-CHIP-DTS.patch
@@ -1,7 +1,7 @@
 From 465a225fb2afb3ebf1becbe76d46b084d46f30a5 Mon Sep 17 00:00:00 2001
 From: Maxime Ripard <maxime.ripard@free-electrons.com>
 Date: Tue, 9 Jun 2015 19:38:43 +0200
-Subject: [PATCH 2/3] ARM: sun5i: Add C.H.I.P DTS
+Subject: [PATCH 2/9] ARM: sun5i: Add C.H.I.P DTS
 
 The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of
 RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack
diff --git a/libre/linux-libre-lts/0003-ARM-sun5i-Add-R8-DTSI.patch b/libre/linux-libre-lts/0003-ARM-sun5i-Add-R8-DTSI.patch
deleted file mode 100644
index bfa01eaa8..000000000
--- a/libre/linux-libre-lts/0003-ARM-sun5i-Add-R8-DTSI.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 49e4f3c3271e7eff2800596ba168c932d7d702b8 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 18 Sep 2015 09:09:34 +0200
-Subject: [PATCH 3/3] ARM: sun5i: Add R8 DTSI
-
-The R8 is very close to the A13, but it still has a few differences,
-notably a composite output, which the A13 lacks.
-
-Add a DTSI based on the A13's to hold those differences.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Reviewed-by: Chen-Yu Tsai <wens@csie.org>
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-r8.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 59 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun5i-r8.dtsi
-
-diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
-new file mode 100644
-index 0000000..0ef8656
---- /dev/null
-+++ b/arch/arm/boot/dts/sun5i-r8.dtsi
-@@ -0,0 +1,59 @@
-+/*
-+ * Copyright 2015 Free Electrons
-+ * Copyright 2015 NextThing Co
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sun5i-a13.dtsi"
-+
-+/ {
-+	chosen {
-+		framebuffer@1 {
-+			compatible = "allwinner,simple-framebuffer",
-+				     "simple-framebuffer";
-+			allwinner,pipeline = "de_be0-lcd0-tve0";
-+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-+				 <&ahb_gates 44>;
-+			status = "disabled";
-+		};
-+	};
-+};
--- 
-cgit v0.12
-
diff --git a/libre/linux-libre-lts/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch b/libre/linux-libre-lts/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch
new file mode 100644
index 000000000..e9b2c566c
--- /dev/null
+++ b/libre/linux-libre-lts/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch
@@ -0,0 +1,32 @@
+From e54693ed82ae0fee934a21328536751afd293c80 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Tue, 28 Jul 2015 10:37:01 +0200
+Subject: [PATCH 3/9] ARM: sun5i: chip: Enable the audio codec
+
+The CHIP v0.2 has a composite output on a mini-jack connector, the audio
+part being provided by the on-SoC codec. Enable it.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Acked-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm/boot/dts/sun5i-r8-chip.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
+index abf3ccb..530ab28 100644
+--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
++++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
+@@ -66,6 +66,10 @@
+ 	};
+ };
+ 
++&codec {
++	status = "okay";
++};
++
+ &ehci0 {
+ 	status = "okay";
+ };
+-- 
+cgit v0.12
+
diff --git a/libre/linux-libre-lts/0004-ARM-sun5i-Add-R8-DTSI.patch b/libre/linux-libre-lts/0004-ARM-sun5i-Add-R8-DTSI.patch
new file mode 100644
index 000000000..5c97fd48c
--- /dev/null
+++ b/libre/linux-libre-lts/0004-ARM-sun5i-Add-R8-DTSI.patch
@@ -0,0 +1,779 @@
+From 49e4f3c3271e7eff2800596ba168c932d7d702b8 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Fri, 18 Sep 2015 09:09:34 +0200
+Subject: [PATCH 4/9] ARM: sun5i: Add R8 DTSI
+
+The R8 is very close to the A13, but it still has a few differences,
+notably a composite output, which the A13 lacks.
+
+Add a DTSI based on the A13's to hold those differences.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+Reviewed-by: Hans de Goede <hdegoede@redhat.com>
+Reviewed-by: André Silva <emulatorman@parabola.nu>
+Reviewed-by: Márcio Silva <coadde@parabola.nu>
+---
+ arch/arm/boot/dts/sun5i-r8.dtsi | 750 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 750 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun5i-r8.dtsi
+
+diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
+new file mode 100644
+index 0000000..75a9960
+--- /dev/null
++++ b/arch/arm/boot/dts/sun5i-r8.dtsi
+@@ -0,0 +1,750 @@
++/*
++ * Copyright 2015 Free Electrons
++ * Copyright 2015 NextThing Co
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include "skeleton.dtsi"
++
++#include <dt-bindings/thermal/thermal.h>
++
++#include <dt-bindings/clock/sun4i-a10-pll2.h>
++#include <dt-bindings/dma/sun4i-a10.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++	interrupt-parent = <&intc>;
++
++	chosen {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++
++		framebuffer@0 {
++			compatible = "allwinner,simple-framebuffer",
++				     "simple-framebuffer";
++			allwinner,pipeline = "de_be0-lcd0";
++			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
++			status = "disabled";
++		};
++
++		framebuffer@1 {
++			compatible = "allwinner,simple-framebuffer",
++				     "simple-framebuffer";
++			allwinner,pipeline = "de_be0-lcd0-tve0";
++			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
++				 <&ahb_gates 44>;
++			status = "disabled";
++		};
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		cpu0: cpu@0 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a8";
++			reg = <0x0>;
++			clocks = <&cpu>;
++			clock-latency = <244144>; /* 8 32k periods */
++			operating-points = <
++				/* kHz    uV */
++				1008000 1400000
++				912000  1350000
++				864000  1300000
++				624000  1200000
++				576000  1200000
++				432000  1200000
++				>;
++			#cooling-cells = <2>;
++			cooling-min-level = <0>;
++			cooling-max-level = <5>;
++		};
++	};
++
++	thermal-zones {
++		cpu_thermal {
++			/* milliseconds */
++			polling-delay-passive = <250>;
++			polling-delay = <1000>;
++			thermal-sensors = <&rtp>;
++
++			cooling-maps {
++				map0 {
++					trip = <&cpu_alert0>;
++					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
++				};
++			};
++
++			trips {
++				cpu_alert0: cpu_alert0 {
++					/* milliCelsius */
++					temperature = <850000>;
++					hysteresis = <2000>;
++					type = "passive";
++				};
++
++				cpu_crit: cpu_crit {
++					/* milliCelsius */
++					temperature = <100000>;
++					hysteresis = <2000>;
++					type = "critical";
++				};
++			};
++		};
++	};
++
++	memory {
++		reg = <0x40000000 0x20000000>;
++	};
++
++	clocks {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++
++		/*
++		 * This is a dummy clock, to be used as placeholder on
++		 * other mux clocks when a specific parent clock is not
++		 * yet implemented. It should be dropped when the driver
++		 * is complete.
++		 */
++		dummy: dummy {
++			#clock-cells = <0>;
++			compatible = "fixed-clock";
++			clock-frequency = <0>;
++		};
++
++		osc24M: clk@01c20050 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-osc-clk";
++			reg = <0x01c20050 0x4>;
++			clock-frequency = <24000000>;
++			clock-output-names = "osc24M";
++		};
++
++		osc32k: clk@0 {
++			#clock-cells = <0>;
++			compatible = "fixed-clock";
++			clock-frequency = <32768>;
++			clock-output-names = "osc32k";
++		};
++
++		pll1: clk@01c20000 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-pll1-clk";
++			reg = <0x01c20000 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll1";
++		};
++
++		pll2: clk@01c20008 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-pll2-clk";
++			reg = <0x01c20008 0x8>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll2-1x", "pll2-2x",
++					     "pll2-4x", "pll2-8x";
++		};
++
++		pll4: clk@01c20018 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-pll1-clk";
++			reg = <0x01c20018 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll4";
++		};
++
++		pll5: clk@01c20020 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-pll5-clk";
++			reg = <0x01c20020 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll5_ddr", "pll5_other";
++		};
++
++		pll6: clk@01c20028 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-pll6-clk";
++			reg = <0x01c20028 0x4>;
++			clocks = <&osc24M>;
++			clock-output-names = "pll6_sata", "pll6_other", "pll6";
++		};
++
++		/* dummy is 200M */
++		cpu: cpu@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-cpu-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
++			clock-output-names = "cpu";
++		};
++
++		axi: axi@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-axi-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&cpu>;
++			clock-output-names = "axi";
++		};
++
++		axi_gates: clk@01c2005c {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-axi-gates-clk";
++			reg = <0x01c2005c 0x4>;
++			clocks = <&axi>;
++			clock-output-names = "axi_dram";
++		};
++
++		ahb: ahb@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-ahb-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&axi>;
++			clock-output-names = "ahb";
++		};
++
++		ahb_gates: clk@01c20060 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
++			reg = <0x01c20060 0x8>;
++			clocks = <&ahb>;
++			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
++				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
++				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
++				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
++				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
++				"ahb_de_fe", "ahb_iep", "ahb_mali400";
++		};
++
++		apb0: apb0@01c20054 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-apb0-clk";
++			reg = <0x01c20054 0x4>;
++			clocks = <&ahb>;
++			clock-output-names = "apb0";
++		};
++
++		apb0_gates: clk@01c20068 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
++			reg = <0x01c20068 0x4>;
++			clocks = <&apb0>;
++			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
++		};
++
++		apb1: clk@01c20058 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-apb1-clk";
++			reg = <0x01c20058 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
++			clock-output-names = "apb1";
++		};
++
++		apb1_gates: clk@01c2006c {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
++			reg = <0x01c2006c 0x4>;
++			clocks = <&apb1>;
++			clock-output-names = "apb1_i2c0", "apb1_i2c1",
++				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
++		};
++
++		nand_clk: clk@01c20080 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c20080 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "nand";
++		};
++
++		ms_clk: clk@01c20084 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c20084 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ms";
++		};
++
++		mmc0_clk: clk@01c20088 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-mmc-clk";
++			reg = <0x01c20088 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mmc0",
++					     "mmc0_output",
++					     "mmc0_sample";
++		};
++
++		mmc1_clk: clk@01c2008c {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-mmc-clk";
++			reg = <0x01c2008c 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mmc1",
++					     "mmc1_output",
++					     "mmc1_sample";
++		};
++
++		mmc2_clk: clk@01c20090 {
++			#clock-cells = <1>;
++			compatible = "allwinner,sun4i-a10-mmc-clk";
++			reg = <0x01c20090 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mmc2",
++					     "mmc2_output",
++					     "mmc2_sample";
++		};
++
++		ts_clk: clk@01c20098 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c20098 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ts";
++		};
++
++		ss_clk: clk@01c2009c {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c2009c 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ss";
++		};
++
++		spi0_clk: clk@01c200a0 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200a0 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "spi0";
++		};
++
++		spi1_clk: clk@01c200a4 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200a4 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "spi1";
++		};
++
++		spi2_clk: clk@01c200a8 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200a8 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "spi2";
++		};
++
++		ir0_clk: clk@01c200b0 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-mod0-clk";
++			reg = <0x01c200b0 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "ir0";
++		};
++
++		usb_clk: clk@01c200cc {
++			#clock-cells = <1>;
++		        #reset-cells = <1>;
++			compatible = "allwinner,sun5i-a13-usb-clk";
++			reg = <0x01c200cc 0x4>;
++			clocks = <&pll6 1>;
++			clock-output-names = "usb_ohci0", "usb_phy";
++		};
++
++		codec_clk: clk@01c20140 {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun4i-a10-codec-clk";
++			reg = <0x01c20140 0x4>;
++			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
++			clock-output-names = "codec";
++		};
++
++		mbus_clk: clk@01c2015c {
++			#clock-cells = <0>;
++			compatible = "allwinner,sun5i-a13-mbus-clk";
++			reg = <0x01c2015c 0x4>;
++			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
++			clock-output-names = "mbus";
++		};
++	};
++
++	soc@01c00000 {
++		compatible = "simple-bus";
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++
++		sram-controller@01c00000 {
++			compatible = "allwinner,sun4i-a10-sram-controller";
++			reg = <0x01c00000 0x30>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			ranges;
++
++			sram_a: sram@00000000 {
++				compatible = "mmio-sram";
++				reg = <0x00000000 0xc000>;
++				#address-cells = <1>;
++				#size-cells = <1>;
++				ranges = <0 0x00000000 0xc000>;
++			};
++
++			sram_d: sram@00010000 {
++				compatible = "mmio-sram";
++				reg = <0x00010000 0x1000>;
++				#address-cells = <1>;
++				#size-cells = <1>;
++				ranges = <0 0x00010000 0x1000>;
++
++				otg_sram: sram-section@0000 {
++					compatible = "allwinner,sun4i-a10-sram-d";
++					reg = <0x0000 0x1000>;
++					status = "disabled";
++				};
++			};
++		};
++
++		dma: dma-controller@01c02000 {
++			compatible = "allwinner,sun4i-a10-dma";
++			reg = <0x01c02000 0x1000>;
++			interrupts = <27>;
++			clocks = <&ahb_gates 6>;
++			#dma-cells = <2>;
++		};
++
++		spi0: spi@01c05000 {
++			compatible = "allwinner,sun4i-a10-spi";
++			reg = <0x01c05000 0x1000>;
++			interrupts = <10>;
++			clocks = <&ahb_gates 20>, <&spi0_clk>;
++			clock-names = "ahb", "mod";
++			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
++			       <&dma SUN4I_DMA_DEDICATED 26>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		spi1: spi@01c06000 {
++			compatible = "allwinner,sun4i-a10-spi";
++			reg = <0x01c06000 0x1000>;
++			interrupts = <11>;
++			clocks = <&ahb_gates 21>, <&spi1_clk>;
++			clock-names = "ahb", "mod";
++			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
++			       <&dma SUN4I_DMA_DEDICATED 8>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		mmc0: mmc@01c0f000 {
++			compatible = "allwinner,sun5i-a13-mmc";
++			reg = <0x01c0f000 0x1000>;
++			clocks = <&ahb_gates 8>,
++				 <&mmc0_clk 0>,
++				 <&mmc0_clk 1>,
++				 <&mmc0_clk 2>;
++			clock-names = "ahb",
++				      "mmc",
++				      "output",
++				      "sample";
++			interrupts = <32>;
++			status = "disabled";
++		};
++
++		mmc2: mmc@01c11000 {
++			compatible = "allwinner,sun5i-a13-mmc";
++			reg = <0x01c11000 0x1000>;
++			clocks = <&ahb_gates 10>,
++				 <&mmc2_clk 0>,
++				 <&mmc2_clk 1>,
++				 <&mmc2_clk 2>;
++			clock-names = "ahb",
++				      "mmc",
++				      "output",
++				      "sample";
++			interrupts = <34>;
++			status = "disabled";
++		};
++
++		usb_otg: usb@01c13000 {
++			compatible = "allwinner,sun4i-a10-musb";
++			reg = <0x01c13000 0x0400>;
++			clocks = <&ahb_gates 0>;
++			interrupts = <38>;
++			interrupt-names = "mc";
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			extcon = <&usbphy 0>;
++			allwinner,sram = <&otg_sram 1>;
++			status = "disabled";
++		};
++
++		usbphy: phy@01c13400 {
++			#phy-cells = <1>;
++			compatible = "allwinner,sun5i-a13-usb-phy";
++			reg = <0x01c13400 0x10 0x01c14800 0x4>;
++			reg-names = "phy_ctrl", "pmu1";
++			clocks = <&usb_clk 8>;
++			clock-names = "usb_phy";
++			resets = <&usb_clk 0>, <&usb_clk 1>;
++			reset-names = "usb0_reset", "usb1_reset";
++			status = "disabled";
++		};
++
++		ehci0: usb@01c14000 {
++			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
++			reg = <0x01c14000 0x100>;
++			interrupts = <39>;
++			clocks = <&ahb_gates 1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci0: usb@01c14400 {
++			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
++			reg = <0x01c14400 0x100>;
++			interrupts = <40>;
++			clocks = <&usb_clk 6>, <&ahb_gates 2>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		spi2: spi@01c17000 {
++			compatible = "allwinner,sun4i-a10-spi";
++			reg = <0x01c17000 0x1000>;
++			interrupts = <12>;
++			clocks = <&ahb_gates 22>, <&spi2_clk>;
++			clock-names = "ahb", "mod";
++			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
++			       <&dma SUN4I_DMA_DEDICATED 28>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		intc: interrupt-controller@01c20400 {
++			compatible = "allwinner,sun4i-a10-ic";
++			reg = <0x01c20400 0x400>;
++			interrupt-controller;
++			#interrupt-cells = <1>;
++		};
++
++		pio: pinctrl@01c20800 {
++			compatible = "allwinner,sun5i-a13-pinctrl";
++			reg = <0x01c20800 0x400>;
++			interrupts = <28>;
++			clocks = <&apb0_gates 5>;
++			gpio-controller;
++			interrupt-controller;
++			#interrupt-cells = <2>;
++			#size-cells = <0>;
++			#gpio-cells = <3>;
++
++			uart1_pins_a: uart1@0 {
++				allwinner,pins = "PE10", "PE11";
++				allwinner,function = "uart1";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			uart1_pins_b: uart1@1 {
++				allwinner,pins = "PG3", "PG4";
++				allwinner,function = "uart1";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			uart3_pins_a: uart3@0 {
++				allwinner,pins = "PG9", "PG10";
++				allwinner,function = "uart3";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			uart3_pins_cts_rts_a: uart3-cts-rts@0 {
++				allwinner,pins = "PG11", "PG12";
++				allwinner,function = "uart3";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			i2c0_pins_a: i2c0@0 {
++				allwinner,pins = "PB0", "PB1";
++				allwinner,function = "i2c0";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			i2c1_pins_a: i2c1@0 {
++				allwinner,pins = "PB15", "PB16";
++				allwinner,function = "i2c1";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			i2c2_pins_a: i2c2@0 {
++				allwinner,pins = "PB17", "PB18";
++				allwinner,function = "i2c2";
++				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++
++			mmc0_pins_a: mmc0@0 {
++				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
++				allwinner,function = "mmc0";
++				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
++				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
++			};
++		};
++
++		timer@01c20c00 {
++			compatible = "allwinner,sun4i-a10-timer";
++			reg = <0x01c20c00 0x90>;
++			interrupts = <22>;
++			clocks = <&osc24M>;
++		};
++
++		wdt: watchdog@01c20c90 {
++			compatible = "allwinner,sun4i-a10-wdt";
++			reg = <0x01c20c90 0x10>;
++		};
++
++		lradc: lradc@01c22800 {
++			compatible = "allwinner,sun4i-a10-lradc-keys";
++			reg = <0x01c22800 0x100>;
++			interrupts = <31>;
++			status = "disabled";
++		};
++
++		codec: codec@01c22c00 {
++			#sound-dai-cells = <0>;
++			compatible = "allwinner,sun4i-a10-codec";
++			reg = <0x01c22c00 0x40>;
++			interrupts = <30>;
++			clocks = <&apb0_gates 0>, <&codec_clk>;
++			clock-names = "apb", "codec";
++			dmas = <&dma SUN4I_DMA_NORMAL 19>,
++			       <&dma SUN4I_DMA_NORMAL 19>;
++			dma-names = "rx", "tx";
++			status = "disabled";
++		};
++
++		sid: eeprom@01c23800 {
++			compatible = "allwinner,sun4i-a10-sid";
++			reg = <0x01c23800 0x10>;
++		};
++
++		rtp: rtp@01c25000 {
++			compatible = "allwinner,sun4i-a10-ts";
++			reg = <0x01c25000 0x100>;
++			interrupts = <29>;
++			#thermal-sensor-cells = <0>;
++		};
++
++		uart1: serial@01c28400 {
++			compatible = "snps,dw-apb-uart";
++			reg = <0x01c28400 0x400>;
++			interrupts = <2>;
++			reg-shift = <2>;
++			reg-io-width = <4>;
++			clocks = <&apb1_gates 17>;
++			status = "disabled";
++		};
++
++		uart3: serial@01c28c00 {
++			compatible = "snps,dw-apb-uart";
++			reg = <0x01c28c00 0x400>;
++			interrupts = <4>;
++			reg-shift = <2>;
++			reg-io-width = <4>;
++			clocks = <&apb1_gates 19>;
++			status = "disabled";
++		};
++
++		i2c0: i2c@01c2ac00 {
++			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
++			reg = <0x01c2ac00 0x400>;
++			interrupts = <7>;
++			clocks = <&apb1_gates 0>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		i2c1: i2c@01c2b000 {
++			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
++			reg = <0x01c2b000 0x400>;
++			interrupts = <8>;
++			clocks = <&apb1_gates 1>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		i2c2: i2c@01c2b400 {
++			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
++			reg = <0x01c2b400 0x400>;
++			interrupts = <9>;
++			clocks = <&apb1_gates 2>;
++			status = "disabled";
++			#address-cells = <1>;
++			#size-cells = <0>;
++		};
++
++		timer@01c60000 {
++			compatible = "allwinner,sun5i-a13-hstimer";
++			reg = <0x01c60000 0x1000>;
++			interrupts = <82>, <83>;
++			clocks = <&ahb_gates 28>;
++		};
++	};
++};
+-- 
+cgit v0.12
+
diff --git a/libre/linux-libre-lts/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch b/libre/linux-libre-lts/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch
new file mode 100644
index 000000000..e1c185e0e
--- /dev/null
+++ b/libre/linux-libre-lts/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch
@@ -0,0 +1,299 @@
+From 460d0d444822e9032a2573fc051b45c68b89a97a Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Fri, 18 Jul 2014 15:48:35 -0300
+Subject: [PATCH 5/9] clk: sunxi: Add a driver for the PLL2
+
+The PLL2 on the A10 and later SoCs is the clock used for all the audio
+related operations.
+
+This clock has a somewhat complex output tree, with three outputs (2X, 4X
+and 8X) with a fixed divider from the base clock, and an output (1X) with a
+post divider.
+
+However, we can simplify things since the 1X divider can be fixed, and we
+end up by having a base clock not exposed to any device (or at least
+directly, since the 4X output doesn't have any divider), and 4 fixed
+divider clocks that will be exposed.
+
+This clock seems to have been introduced, at least in this form, in the
+revision B of the A10, but we don't have any information on the clock used
+on the revision A.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+---
+ drivers/clk/sunxi/Makefile                 |   1 +
+ drivers/clk/sunxi/clk-a10-pll2.c           | 188 +++++++++++++++++++++++++++++
+ include/dt-bindings/clock/sun4i-a10-pll2.h |  53 ++++++++
+ 3 files changed, 242 insertions(+)
+ create mode 100644 drivers/clk/sunxi/clk-a10-pll2.c
+ create mode 100644 include/dt-bindings/clock/sun4i-a10-pll2.h
+
+diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
+index f5a35b8..c658a18 100644
+--- a/drivers/clk/sunxi/Makefile
++++ b/drivers/clk/sunxi/Makefile
+@@ -4,6 +4,7 @@
+ 
+ obj-y += clk-sunxi.o clk-factors.o
+ obj-y += clk-a10-hosc.o
++obj-y += clk-a10-pll2.o
+ obj-y += clk-a20-gmac.o
+ obj-y += clk-mod0.o
+ obj-y += clk-simple-gates.o
+diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
+new file mode 100644
+index 0000000..a57742a
+--- /dev/null
++++ b/drivers/clk/sunxi/clk-a10-pll2.c
+@@ -0,0 +1,188 @@
++/*
++ * Copyright 2013 Emilio López
++ * Emilio López <emilio@elopez.com.ar>
++ *
++ * Copyright 2015 Maxime Ripard
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/slab.h>
++
++#include <dt-bindings/clock/sun4i-a10-pll2.h>
++
++#define SUN4I_PLL2_ENABLE		31
++
++#define SUN4I_PLL2_PRE_DIV_SHIFT	0
++#define SUN4I_PLL2_PRE_DIV_WIDTH	5
++#define SUN4I_PLL2_PRE_DIV_MASK		GENMASK(SUN4I_PLL2_PRE_DIV_WIDTH - 1, 0)
++
++#define SUN4I_PLL2_N_SHIFT		8
++#define SUN4I_PLL2_N_WIDTH		7
++#define SUN4I_PLL2_N_MASK		GENMASK(SUN4I_PLL2_N_WIDTH - 1, 0)
++
++#define SUN4I_PLL2_POST_DIV_SHIFT	26
++#define SUN4I_PLL2_POST_DIV_WIDTH	4
++#define SUN4I_PLL2_POST_DIV_MASK	GENMASK(SUN4I_PLL2_POST_DIV_WIDTH - 1, 0)
++
++#define SUN4I_PLL2_POST_DIV_VALUE	4
++
++#define SUN4I_PLL2_OUTPUTS		4
++
++static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
++
++static void __init sun4i_pll2_setup(struct device_node *node)
++{
++	const char *clk_name = node->name, *parent;
++	struct clk **clks, *base_clk, *prediv_clk;
++	struct clk_onecell_data *clk_data;
++	struct clk_multiplier *mult;
++	struct clk_gate *gate;
++	void __iomem *reg;
++	u32 val;
++
++	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
++	if (IS_ERR(reg))
++		return;
++
++	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
++	if (!clk_data)
++		goto err_unmap;
++
++	clks = kcalloc(SUN4I_PLL2_OUTPUTS, sizeof(struct clk *), GFP_KERNEL);
++	if (!clks)
++		goto err_free_data;
++
++	parent = of_clk_get_parent_name(node, 0);
++	prediv_clk = clk_register_divider(NULL, "pll2-prediv",
++					  parent, 0, reg,
++					  SUN4I_PLL2_PRE_DIV_SHIFT,
++					  SUN4I_PLL2_PRE_DIV_WIDTH,
++					  CLK_DIVIDER_ONE_BASED |
++					  CLK_DIVIDER_ALLOW_ZERO,
++					  &sun4i_a10_pll2_lock);
++	if (!prediv_clk) {
++		pr_err("Couldn't register the prediv clock\n");
++		goto err_free_array;
++	}
++
++	/* Setup the gate part of the PLL2 */
++	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
++	if (!gate)
++		goto err_unregister_prediv;
++
++	gate->reg = reg;
++	gate->bit_idx = SUN4I_PLL2_ENABLE;
++	gate->lock = &sun4i_a10_pll2_lock;
++
++	/* Setup the multiplier part of the PLL2 */
++	mult = kzalloc(sizeof(struct clk_multiplier), GFP_KERNEL);
++	if (!mult)
++		goto err_free_gate;
++
++	mult->reg = reg;
++	mult->shift = SUN4I_PLL2_N_SHIFT;
++	mult->width = 7;
++	mult->flags = CLK_MULTIPLIER_ZERO_BYPASS |
++			CLK_MULTIPLIER_ROUND_CLOSEST;
++	mult->lock = &sun4i_a10_pll2_lock;
++
++	parent = __clk_get_name(prediv_clk);
++	base_clk = clk_register_composite(NULL, "pll2-base",
++					  &parent, 1,
++					  NULL, NULL,
++					  &mult->hw, &clk_multiplier_ops,
++					  &gate->hw, &clk_gate_ops,
++					  CLK_SET_RATE_PARENT);
++	if (!base_clk) {
++		pr_err("Couldn't register the base multiplier clock\n");
++		goto err_free_multiplier;
++	}
++
++	parent = __clk_get_name(base_clk);
++
++	/*
++	 * PLL2-1x
++	 *
++	 * This is supposed to have a post divider, but we won't need
++	 * to use it, we just need to initialise it to 4, and use a
++	 * fixed divider.
++	 */
++	val = readl(reg);
++	val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
++	val |= SUN4I_PLL2_POST_DIV_VALUE << SUN4I_PLL2_POST_DIV_SHIFT;
++	writel(val, reg);
++
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_1X, &clk_name);
++	clks[SUN4I_A10_PLL2_1X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    1,
++							    SUN4I_PLL2_POST_DIV_VALUE);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_1X]));
++
++	/*
++	 * PLL2-2x
++	 *
++	 * This clock doesn't use the post divider, and really is just
++	 * a fixed divider from the PLL2 base clock.
++	 */
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_2X, &clk_name);
++	clks[SUN4I_A10_PLL2_2X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    1, 2);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_2X]));
++
++	/* PLL2-4x */
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_4X, &clk_name);
++	clks[SUN4I_A10_PLL2_4X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    1, 1);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_4X]));
++
++	/* PLL2-8x */
++	of_property_read_string_index(node, "clock-output-names",
++				      SUN4I_A10_PLL2_8X, &clk_name);
++	clks[SUN4I_A10_PLL2_8X] = clk_register_fixed_factor(NULL, clk_name,
++							    parent,
++							    CLK_SET_RATE_PARENT,
++							    2, 1);
++	WARN_ON(IS_ERR(clks[SUN4I_A10_PLL2_8X]));
++
++	clk_data->clks = clks;
++	clk_data->clk_num = SUN4I_PLL2_OUTPUTS;
++	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
++
++	return;
++
++err_free_multiplier:
++	kfree(mult);
++err_free_gate:
++	kfree(gate);
++err_unregister_prediv:
++	clk_unregister_divider(prediv_clk);
++err_free_array:
++	kfree(clks);
++err_free_data:
++	kfree(clk_data);
++err_unmap:
++	iounmap(reg);
++}
++CLK_OF_DECLARE(sun4i_pll2, "allwinner,sun4i-a10-pll2-clk", sun4i_pll2_setup);
+diff --git a/include/dt-bindings/clock/sun4i-a10-pll2.h b/include/dt-bindings/clock/sun4i-a10-pll2.h
+new file mode 100644
+index 0000000..071c811
+--- /dev/null
++++ b/include/dt-bindings/clock/sun4i-a10-pll2.h
+@@ -0,0 +1,53 @@
++/*
++ * Copyright 2015 Maxime Ripard
++ *
++ * Maxime Ripard <maxime.ripard@free-electrons.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#ifndef __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
++#define __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_
++
++#define SUN4I_A10_PLL2_1X	0
++#define SUN4I_A10_PLL2_2X	1
++#define SUN4I_A10_PLL2_4X	2
++#define SUN4I_A10_PLL2_8X	3
++
++#endif /* __DT_BINDINGS_CLOCK_SUN4I_A10_PLL2_H_ */
+-- 
+cgit v0.12
+
diff --git a/libre/linux-libre-lts/0006-clk-sunxi-pll2-Add-A13-support.patch b/libre/linux-libre-lts/0006-clk-sunxi-pll2-Add-A13-support.patch
new file mode 100644
index 000000000..e8c807c25
--- /dev/null
+++ b/libre/linux-libre-lts/0006-clk-sunxi-pll2-Add-A13-support.patch
@@ -0,0 +1,89 @@
+From eb662f854710e6a438789a4b0d1d0cce8c12379d Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Mon, 21 Sep 2015 13:32:43 +0200
+Subject: [PATCH 6/9] clk: sunxi: pll2: Add A13 support
+
+The A13, unlike the A10 and A20, doesn't use a pass-through exception for
+the 0 value in the pre and post dividers, but increments all the values
+written in the register by one.
+
+Add an exception for both these cases to handle them nicely.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+---
+ drivers/clk/sunxi/clk-a10-pll2.c | 38 +++++++++++++++++++++++++++++++++-----
+ 1 file changed, 33 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
+index a57742a..5484c31 100644
+--- a/drivers/clk/sunxi/clk-a10-pll2.c
++++ b/drivers/clk/sunxi/clk-a10-pll2.c
+@@ -41,9 +41,15 @@
+ 
+ #define SUN4I_PLL2_OUTPUTS		4
+ 
++struct sun4i_pll2_data {
++	u32	post_div_offset;
++	u32	pre_div_flags;
++};
++
+ static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
+ 
+-static void __init sun4i_pll2_setup(struct device_node *node)
++static void __init sun4i_pll2_setup(struct device_node *node,
++				    struct sun4i_pll2_data *data)
+ {
+ 	const char *clk_name = node->name, *parent;
+ 	struct clk **clks, *base_clk, *prediv_clk;
+@@ -70,8 +76,7 @@ static void __init sun4i_pll2_setup(struct device_node *node)
+ 					  parent, 0, reg,
+ 					  SUN4I_PLL2_PRE_DIV_SHIFT,
+ 					  SUN4I_PLL2_PRE_DIV_WIDTH,
+-					  CLK_DIVIDER_ONE_BASED |
+-					  CLK_DIVIDER_ALLOW_ZERO,
++					  data->pre_div_flags,
+ 					  &sun4i_a10_pll2_lock);
+ 	if (!prediv_clk) {
+ 		pr_err("Couldn't register the prediv clock\n");
+@@ -122,7 +127,7 @@ static void __init sun4i_pll2_setup(struct device_node *node)
+ 	 */
+ 	val = readl(reg);
+ 	val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
+-	val |= SUN4I_PLL2_POST_DIV_VALUE << SUN4I_PLL2_POST_DIV_SHIFT;
++	val |= (SUN4I_PLL2_POST_DIV_VALUE - data->post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
+ 	writel(val, reg);
+ 
+ 	of_property_read_string_index(node, "clock-output-names",
+@@ -185,4 +190,27 @@ err_free_data:
+ err_unmap:
+ 	iounmap(reg);
+ }
+-CLK_OF_DECLARE(sun4i_pll2, "allwinner,sun4i-a10-pll2-clk", sun4i_pll2_setup);
++
++static struct sun4i_pll2_data sun4i_a10_pll2_data = {
++	.pre_div_flags	= CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
++};
++
++static void __init sun4i_a10_pll2_setup(struct device_node *node)
++{
++	sun4i_pll2_setup(node, &sun4i_a10_pll2_data);
++}
++
++CLK_OF_DECLARE(sun4i_a10_pll2, "allwinner,sun4i-a10-pll2-clk",
++	       sun4i_a10_pll2_setup);
++
++static struct sun4i_pll2_data sun5i_a13_pll2_data = {
++	.post_div_offset	= 1,
++};
++
++static void __init sun5i_a13_pll2_setup(struct device_node *node)
++{
++	sun4i_pll2_setup(node, &sun5i_a13_pll2_data);
++}
++
++CLK_OF_DECLARE(sun5i_a13_pll2, "allwinner,sun5i-a13-pll2-clk",
++	       sun5i_a13_pll2_setup);
+-- 
+cgit v0.12
+
diff --git a/libre/linux-libre-lts/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch b/libre/linux-libre-lts/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch
new file mode 100644
index 000000000..82484923a
--- /dev/null
+++ b/libre/linux-libre-lts/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch
@@ -0,0 +1,34 @@
+From 5b3abbee42562a7bcdc6b589a3d8f9b5752550ed Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Tue, 22 Sep 2015 15:36:00 +0200
+Subject: [PATCH 7/9] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node
+
+Add a node representing the usb power supply part of the axp209 pmic, note
+that the usb power supply and the (to be added later) ac power supply will
+each have their own child-node, so that they can be separately specified
+as power-supply for other nodes using a power-supply property with a
+phandle pointing to the right axp209 child-node.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/axp209.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
+index 24c935c..051ab3b 100644
+--- a/arch/arm/boot/dts/axp209.dtsi
++++ b/arch/arm/boot/dts/axp209.dtsi
+@@ -89,4 +89,9 @@
+ 			regulator-name = "ldo5";
+ 		};
+ 	};
++
++	usb_power_supply: usb_power_supply {
++		compatible = "x-powers,axp202-usb-power-supply";
++		status = "disabled";
++	};
+ };
+-- 
+cgit v0.12
+
diff --git a/libre/linux-libre-lts/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch b/libre/linux-libre-lts/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch
new file mode 100644
index 000000000..fc7418ab2
--- /dev/null
+++ b/libre/linux-libre-lts/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch
@@ -0,0 +1,33 @@
+From db30fce1eea58e50ae8b2722704b4f529c394dba Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Wed, 25 Nov 2015 16:39:04 +0100
+Subject: [PATCH 8/9] ARM: sun5i: chip: Add CPU regulator for cpufreq
+
+The current DT doesn't have a phandle to the CPU regulator in the CPU node,
+which disables the CPU voltage scaling entirely.
+
+Add that phandle.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun5i-r8-chip.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
+index 530ab28..f6898c6 100644
+--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
++++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
+@@ -70,6 +70,10 @@
+ 	status = "okay";
+ };
+ 
++&cpu0 {
++	cpu-supply = <&reg_dcdc2>;
++};
++
+ &ehci0 {
+ 	status = "okay";
+ };
+-- 
+cgit v0.12
+
diff --git a/libre/linux-libre-lts/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch b/libre/linux-libre-lts/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch
new file mode 100644
index 000000000..9704d17d6
--- /dev/null
+++ b/libre/linux-libre-lts/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch
@@ -0,0 +1,92 @@
+From 59f0ec231f397001801264063db3b6dcc3eef590 Mon Sep 17 00:00:00 2001
+From: Maxime Ripard <maxime.ripard@free-electrons.com>
+Date: Tue, 1 Dec 2015 12:14:52 +0100
+Subject: [PATCH 9/9] clk: sunxi: pll2: Fix clock running too fast
+
+Contrary to what the datasheet says, the pre divider doesn't seem to be
+incremented by one in the PLL2, but just uses the value from the register,
+with 0 being a bypass.
+
+This fixes the audio playing too fast.
+
+Since we now have the same pre-divider flags, and the only difference with
+the A10 is the post-divider offset, also remove the structure to just pass
+the offset as an argument.
+
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Fixes: eb662f854710 ("clk: sunxi: pll2: Add A13 support")
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+---
+ drivers/clk/sunxi/clk-a10-pll2.c | 23 +++++------------------
+ 1 file changed, 5 insertions(+), 18 deletions(-)
+
+diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c
+index 5484c31..0ee1f36 100644
+--- a/drivers/clk/sunxi/clk-a10-pll2.c
++++ b/drivers/clk/sunxi/clk-a10-pll2.c
+@@ -41,15 +41,10 @@
+ 
+ #define SUN4I_PLL2_OUTPUTS		4
+ 
+-struct sun4i_pll2_data {
+-	u32	post_div_offset;
+-	u32	pre_div_flags;
+-};
+-
+ static DEFINE_SPINLOCK(sun4i_a10_pll2_lock);
+ 
+ static void __init sun4i_pll2_setup(struct device_node *node,
+-				    struct sun4i_pll2_data *data)
++				    int post_div_offset)
+ {
+ 	const char *clk_name = node->name, *parent;
+ 	struct clk **clks, *base_clk, *prediv_clk;
+@@ -76,7 +71,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
+ 					  parent, 0, reg,
+ 					  SUN4I_PLL2_PRE_DIV_SHIFT,
+ 					  SUN4I_PLL2_PRE_DIV_WIDTH,
+-					  data->pre_div_flags,
++					  CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+ 					  &sun4i_a10_pll2_lock);
+ 	if (!prediv_clk) {
+ 		pr_err("Couldn't register the prediv clock\n");
+@@ -127,7 +122,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,
+ 	 */
+ 	val = readl(reg);
+ 	val &= ~(SUN4I_PLL2_POST_DIV_MASK << SUN4I_PLL2_POST_DIV_SHIFT);
+-	val |= (SUN4I_PLL2_POST_DIV_VALUE - data->post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
++	val |= (SUN4I_PLL2_POST_DIV_VALUE - post_div_offset) << SUN4I_PLL2_POST_DIV_SHIFT;
+ 	writel(val, reg);
+ 
+ 	of_property_read_string_index(node, "clock-output-names",
+@@ -191,25 +186,17 @@ err_unmap:
+ 	iounmap(reg);
+ }
+ 
+-static struct sun4i_pll2_data sun4i_a10_pll2_data = {
+-	.pre_div_flags	= CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+-};
+-
+ static void __init sun4i_a10_pll2_setup(struct device_node *node)
+ {
+-	sun4i_pll2_setup(node, &sun4i_a10_pll2_data);
++	sun4i_pll2_setup(node, 0);
+ }
+ 
+ CLK_OF_DECLARE(sun4i_a10_pll2, "allwinner,sun4i-a10-pll2-clk",
+ 	       sun4i_a10_pll2_setup);
+ 
+-static struct sun4i_pll2_data sun5i_a13_pll2_data = {
+-	.post_div_offset	= 1,
+-};
+-
+ static void __init sun5i_a13_pll2_setup(struct device_node *node)
+ {
+-	sun4i_pll2_setup(node, &sun5i_a13_pll2_data);
++	sun4i_pll2_setup(node, 1);
+ }
+ 
+ CLK_OF_DECLARE(sun5i_a13_pll2, "allwinner,sun5i-a13-pll2-clk",
+-- 
+cgit v0.12
+
diff --git a/libre/linux-libre-lts/PKGBUILD b/libre/linux-libre-lts/PKGBUILD
index 366d1c97e..24435df58 100644
--- a/libre/linux-libre-lts/PKGBUILD
+++ b/libre/linux-libre-lts/PKGBUILD
@@ -52,7 +52,13 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/li
         "https://repo.parabola.nu/other/rcn-libre/patches/${_pkgver%-*}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch.sig"
         '0001-ARM-sunxi-Add-R8-support.patch'
         '0002-ARM-sun5i-Add-CHIP-DTS.patch'
-        '0003-ARM-sun5i-Add-R8-DTSI.patch'
+        '0003-ARM-sun5i-chip-Enable-the-audio-codec.patch'
+        '0004-ARM-sun5i-Add-R8-DTSI.patch'
+        '0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch'
+        '0006-clk-sunxi-pll2-Add-A13-support.patch'
+        '0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch'
+        '0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch'
+        '0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch'
         '0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch'
         '0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch'
         '0003-SMILE-Plug-device-tree-file.patch'
@@ -83,7 +89,10 @@ sha256sums=('48b2e5ea077d0a0bdcb205e67178e8eb5b2867db3b2364b701dbc801d9755324'
             'SKIP'
             'c30f5b73d31202d1453c15eafc933a374a9087169761cd8d9404a80591ddabb2'
             '69517e7f99bfbb8f4483162a1e76bda7f6845284476c20dbd16e074249400396'
-            '1970e32e3dc9da22c79c6ef9fe22dd4874a76a81ed1012ddfc7e83d1a2a0214b'
+            '576d0be8df3450f3a6db8ea5aba6ebda1a3417d212763a403c4df0c333ef2a9d'
+            'a359eacdb88f050b9d8b6eee9e84c7b50215ca804dbc0c2f79c2f80c7fae1b86'
+            '0621cdfa195494509c6f8d328932c0ff3523a289880c378d7c46e93ca2e6cce4'
+            'f1294da7523cbe1fb6b0ef3cb054548d8589c6e3dd64af7b8cf18a7845b68459'
             '203b07cc241f2374d1e18583fc9940cc69da134f992bff65a8b376c717aa7ea7'
             '28fb8c937c2a0dc824ea755efba26ac5a4555f9a97d79f4e31f24b23c5eae59c'
             '39bfd7f6e2df0b87b52488462edb2fbcfaf9e3eb2a974fc7b3bc22147352fece'
@@ -123,7 +132,13 @@ prepare() {
     # Parabola patches
     patch -p1 -i "${srcdir}/0001-ARM-sunxi-Add-R8-support.patch"
     patch -p1 -i "${srcdir}/0002-ARM-sun5i-Add-CHIP-DTS.patch"
-    patch -p1 -i "${srcdir}/0003-ARM-sun5i-Add-R8-DTSI.patch"
+    patch -p1 -i "${srcdir}/0003-ARM-sun5i-chip-Enable-the-audio-codec.patch"
+    patch -p1 -i "${srcdir}/0004-ARM-sun5i-Add-R8-DTSI.patch"
+    patch -p1 -i "${srcdir}/0005-clk-sunxi-Add-a-driver-for-the-PLL2.patch"
+    patch -p1 -i "${srcdir}/0006-clk-sunxi-pll2-Add-A13-support.patch"
+    patch -p1 -i "${srcdir}/0007-ARM-dts-axp209-Add-usb_power_supply-child-node-to-the-ax209-node.patch"
+    patch -p1 -i "${srcdir}/0008-ARM-sun5i-chip-Add-CPU-regulator-for-cpufreq.patch"
+    patch -p1 -i "${srcdir}/0009-clk-sunxi-pll2-Fix-clock-running-too-fast.patch"
 
     # ALARM patches
     patch -p1 -i "${srcdir}/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch"