linux-libre-lts: do not buid docs in armv7h

otherwise the build fails

Signed-off-by: David P <megver83@parabola.nu>

3 files changed, 34 insertions, 34 deletions

diff --git a/libre/linux-libre-lts/PKGBUILD b/libre/linux-libre-lts/PKGBUILD
index 407148498..31f8eed1d 100644
--- a/libre/linux-libre-lts/PKGBUILD
+++ b/libre/linux-libre-lts/PKGBUILD
@@ -9,16 +9,18 @@
 
 # Based on linux-lts package
 
+# NOTE: Don't build htmldocs due to an error in sphinx (armv7h only)
+
 _replacesarchkernel=('linux%') # '%' gets replaced with kernel suffix
 _replacesoldkernels=() # '%' gets replaced with kernel suffix
 _replacesoldmodules=() # '%' gets replaced with kernel suffix
 
 pkgbase=linux-libre-lts
-pkgver=5.10.39
+pkgver=5.10.56
 pkgrel=1
 pkgdesc='LTS Linux-libre'
-rcnver=5.10.35
-rcnrel=armv7-x36
+rcnver=5.10.56
+rcnrel=armv7-x45
 url='https://linux-libre.fsfla.org/'
 arch=(i686 x86_64 armv7h)
 license=(GPL2)
@@ -59,7 +61,7 @@ validpgpkeys=(
 )
 sha512sums=('ccc52db049a66ff146d9fc84fb00e783f2d04211156233a382f87589fec7631b8fbb3e76bfd94279607b883d25f9745e6c7d2bd62b13311dc6b425002bd42ec0'
             'SKIP'
-            '8a1c3dc82dc1c6e02041d8192cf9b5b61c922476e2e2ae92c15bb1307163e7dbd26f2a96a94f5eb23f453594f0247c6a72086a6b36afe709506019805d99cdad'
+            '44f57270e8c973d03515ff8526865e5cecd7e7ae29c4c10468a2ee33b98baa20cdca07fe64910740a3b38c4a08eeb5727fb26d415cfd719403b976685d0e2b86'
             'SKIP'
             '13cb5bc42542e7b8bb104d5f68253f6609e463b6799800418af33eb0272cc269aaa36163c3e6f0aacbdaaa1d05e2827a4a7c4a08a029238439ed08b89c564bb3'
             'SKIP'
@@ -67,15 +69,15 @@ sha512sums=('ccc52db049a66ff146d9fc84fb00e783f2d04211156233a382f87589fec7631b8fb
             'SKIP'
             '267295aa0cea65684968420c68b32f1a66a22d018b9d2b2c1ef14267bcf4cb68aaf7099d073cbfefe6c25c8608bdcbbd45f7ac8893fdcecbf1e621abdfe9ecc1'
             'SKIP'
-            'd1d78de32b98d8aaebae4dba030bb859668174714b3f9ac7c80f9a05badc990370929d235da9344740fccaff3e83bbe2393535bb82c06d3e2113f24afe7bf756'
-            '97a5714bd97065b689043cfbd3c7c9e2bfadb6dc853875446a06240d07d47af76e3bba0a8acf0a5c1715ee32be1395566bb124af81d3b69fd95a2c17b1316d74'
+            '42e5e4913993650bb9bb22accbc1c272e8e0be4891e5bb82fb7c0f140d56bdc6f5282f353d53d49e4aa3a010d464c64001fb6d14d615c6778c10bec204435ea3'
+            'f7397cfec791ba8df9e342a850f4794acc5e69707a5c4e5f9c03b14c75f975317055a2be59ee51c3fd22bb8c534639454931bac79d9f3761453a62fc085d8801'
             '6012fa7b97c15ada82f0c205ea983bebac8b672ca498e22f524d219bdd8715784b24ce7d457803e8221a945c3daff95c4e467f70a420b9c2aa95d627f2d160a9'
             '53103bf55b957b657039510527df0df01279dec59cda115a4d6454e4135025d4546167fa30bdc99107f232561c1e096d8328609ab5a876cf7017176f92ad3e0b'
             '02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af'
             'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168'
             'aed7844c51ec705ef1ef5d9f1adf27939073c99d4fcc97051bed2fba1ec161fdde4c57cbe039209fb86c72918493bea55ed26189c1dda3dbea3a3a7019363818')
 sha512sums_i686=('3a346ff5e0fdefafd28bc3dd0e4b6cd68e3f0014e59d1611d99f2edb8d074fd32649eeb0894a7e340e4f907b5cfc0e08e0753e0427a68dc113bb22835a892968')
-sha512sums_armv7h=('dcf28ad46cfbf9eefcd036257ddfcdae989d05138a4c0d1384288da47e8d17d3562579f427e72fc3dfb077aa643c2428a314804c557d50d8f156e143fde06216'
+sha512sums_armv7h=('8105ecb83dd3afa8b20f1a0846ff63ae5e6368a46e3e2f5a270d94e1ef5886b2b48eb9a8ff6ce9be2d0474abcc793c760984cd9df37b53914d0a8f68e010f20e'
                    'SKIP')
 
 _replacesarchkernel=("${_replacesarchkernel[@]/\%/${pkgbase#linux-libre}}")
@@ -150,7 +152,9 @@ prepare() {
 build() {
   cd $_srcname
   make all
-  make htmldocs
+  if ! [ "$CARCH" = armv7h ]; then
+    make htmldocs
+  fi
 }
 
 _package() {
@@ -314,7 +318,8 @@ _package-docs() {
   ln -sr "$builddir/Documentation" "$pkgdir/usr/share/doc/$pkgbase"
 }
 
-pkgname=("$pkgbase" "$pkgbase-headers" "$pkgbase-docs")
+pkgname=("$pkgbase" "$pkgbase-headers")
+[[ $CARCH = armv7h ]] || pkgname+=("$pkgbase-docs")
 for _p in "${pkgname[@]}"; do
   eval "package_$_p() {
     $(declare -f "_package${_p#$pkgbase}")
diff --git a/libre/linux-libre-lts/config.i686 b/libre/linux-libre-lts/config.i686
index cdd185940..41510652b 100644
--- a/libre/linux-libre-lts/config.i686
+++ b/libre/linux-libre-lts/config.i686
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 5.10.39-gnu Kernel Configuration
+# Linux/x86 5.10.56-gnu Kernel Configuration
 #
 CONFIG_CC_VERSION_TEXT="gcc (GCC) 11.1.0"
 CONFIG_CC_IS_GCC=y
@@ -2223,7 +2223,6 @@ CONFIG_MTD_BLOCK=m
 # CONFIG_SSFDC is not set
 # CONFIG_SM_FTL is not set
 # CONFIG_MTD_OOPS is not set
-CONFIG_MTD_PSTORE=m
 # CONFIG_MTD_SWAP is not set
 # CONFIG_MTD_PARTITIONED_MASTER is not set
 
@@ -2238,7 +2237,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
 # end of RAM/ROM/Flash chip drivers
 
@@ -2313,7 +2312,11 @@ CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_LPDDR is not set
 # end of LPDDR & LPDDR2 PCM memory drivers
 
-# CONFIG_MTD_SPI_NOR is not set
+CONFIG_MTD_SPI_NOR=m
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_SPI_INTEL_SPI=m
+CONFIG_SPI_INTEL_SPI_PCI=m
+CONFIG_SPI_INTEL_SPI_PLATFORM=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_LIMIT=20
@@ -9246,7 +9249,6 @@ CONFIG_IPACK_BUS=m
 CONFIG_BOARD_TPCI200=m
 CONFIG_SERIAL_IPOCTAL=m
 CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_BRCMSTB_RESCAL=y
 # CONFIG_RESET_INTEL_GW is not set
 CONFIG_RESET_TI_SYSCON=m
 
@@ -9620,11 +9622,6 @@ CONFIG_PSTORE_COMPRESS_DEFAULT="zstd"
 # CONFIG_PSTORE_PMSG is not set
 # CONFIG_PSTORE_FTRACE is not set
 CONFIG_PSTORE_RAM=m
-CONFIG_PSTORE_ZONE=m
-CONFIG_PSTORE_BLK=m
-CONFIG_PSTORE_BLK_BLKDEV=""
-CONFIG_PSTORE_BLK_KMSG_SIZE=64
-CONFIG_PSTORE_BLK_MAX_REASON=2
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -9829,7 +9826,7 @@ CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
 # CONFIG_DEFAULT_SECURITY_TOMOYO is not set
 # CONFIG_DEFAULT_SECURITY_APPARMOR is not set
 CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_LSM="lockdown,yama,bpf"
+CONFIG_LSM="lockdown,yama"
 
 #
 # Kernel hardening options
@@ -10080,6 +10077,7 @@ CONFIG_SYSTEM_TRUSTED_KEYS=""
 CONFIG_SECONDARY_TRUSTED_KEYRING=y
 CONFIG_SYSTEM_BLACKLIST_KEYRING=y
 CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
+# CONFIG_SYSTEM_REVOCATION_LIST is not set
 # end of Certificates for signature checking
 
 CONFIG_BINARY_PRINTF=y
@@ -10381,7 +10379,7 @@ CONFIG_STACKTRACE=y
 #
 # Debug kernel data structures
 #
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_PLIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
diff --git a/libre/linux-libre-lts/config.x86_64 b/libre/linux-libre-lts/config.x86_64
index 95fb28137..f0c036634 100644
--- a/libre/linux-libre-lts/config.x86_64
+++ b/libre/linux-libre-lts/config.x86_64
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 5.10.39-gnu Kernel Configuration
+# Linux/x86 5.10.56-gnu Kernel Configuration
 #
 CONFIG_CC_VERSION_TEXT="gcc (GCC) 11.1.0"
 CONFIG_CC_IS_GCC=y
@@ -2249,7 +2249,6 @@ CONFIG_MTD_BLOCK=m
 # CONFIG_SSFDC is not set
 # CONFIG_SM_FTL is not set
 # CONFIG_MTD_OOPS is not set
-CONFIG_MTD_PSTORE=m
 # CONFIG_MTD_SWAP is not set
 # CONFIG_MTD_PARTITIONED_MASTER is not set
 
@@ -2264,7 +2263,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
 # end of RAM/ROM/Flash chip drivers
 
@@ -2336,7 +2335,11 @@ CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_LPDDR is not set
 # end of LPDDR & LPDDR2 PCM memory drivers
 
-# CONFIG_MTD_SPI_NOR is not set
+CONFIG_MTD_SPI_NOR=m
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_SPI_INTEL_SPI=m
+CONFIG_SPI_INTEL_SPI_PCI=m
+CONFIG_SPI_INTEL_SPI_PLATFORM=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_LIMIT=20
@@ -7812,7 +7815,6 @@ CONFIG_INTEL_IDMA64=m
 CONFIG_INTEL_IDXD=m
 CONFIG_INTEL_IOATDMA=m
 CONFIG_PLX_DMA=m
-CONFIG_XILINX_ZYNQMP_DPDMA=m
 CONFIG_QCOM_HIDMA_MGMT=m
 CONFIG_QCOM_HIDMA=m
 CONFIG_DW_DMAC_CORE=y
@@ -8951,7 +8953,6 @@ CONFIG_IPACK_BUS=m
 CONFIG_BOARD_TPCI200=m
 CONFIG_SERIAL_IPOCTAL=m
 CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_BRCMSTB_RESCAL=y
 CONFIG_RESET_TI_SYSCON=m
 
 #
@@ -9330,11 +9331,6 @@ CONFIG_PSTORE_COMPRESS_DEFAULT="zstd"
 # CONFIG_PSTORE_PMSG is not set
 # CONFIG_PSTORE_FTRACE is not set
 CONFIG_PSTORE_RAM=m
-CONFIG_PSTORE_ZONE=m
-CONFIG_PSTORE_BLK=m
-CONFIG_PSTORE_BLK_BLKDEV=""
-CONFIG_PSTORE_BLK_KMSG_SIZE=64
-CONFIG_PSTORE_BLK_MAX_REASON=2
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -9540,7 +9536,7 @@ CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
 # CONFIG_DEFAULT_SECURITY_TOMOYO is not set
 # CONFIG_DEFAULT_SECURITY_APPARMOR is not set
 CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_LSM="lockdown,yama,bpf"
+CONFIG_LSM="lockdown,yama"
 
 #
 # Kernel hardening options
@@ -9817,6 +9813,7 @@ CONFIG_SYSTEM_TRUSTED_KEYS=""
 CONFIG_SECONDARY_TRUSTED_KEYRING=y
 CONFIG_SYSTEM_BLACKLIST_KEYRING=y
 CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
+# CONFIG_SYSTEM_REVOCATION_LIST is not set
 # end of Certificates for signature checking
 
 CONFIG_BINARY_PRINTF=y
@@ -10128,7 +10125,7 @@ CONFIG_STACKTRACE=y
 #
 # Debug kernel data structures
 #
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_PLIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set