/* * Copyright 2019 - 2024 Anton Tananaev (anton@traccar.org) * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package org.traccar.config; import java.util.List; public final class Keys { private Keys() { } /** * Network interface for the protocol. If not specified, server will bind all interfaces. */ public static final ConfigSuffix PROTOCOL_ADDRESS = new StringConfigSuffix( ".address", List.of(KeyType.CONFIG)); /** * Port number for the protocol. Most protocols use TCP on the transport layer. Some protocols use UDP. Some * support both TCP and UDP. */ public static final ConfigSuffix PROTOCOL_PORT = new PortConfigSuffix( ".port", List.of(KeyType.CONFIG)); /** * List of devices for polling protocols. List should contain unique ids separated by commas. Used only for polling * protocols. */ public static final ConfigSuffix PROTOCOL_DEVICES = new StringConfigSuffix( ".devices", List.of(KeyType.CONFIG)); /** * Polling interval in seconds. Used only for polling protocols. */ public static final ConfigSuffix PROTOCOL_INTERVAL = new LongConfigSuffix( ".interval", List.of(KeyType.CONFIG)); /** * Enable SSL support for the protocol. Not all protocols support this. */ public static final ConfigSuffix PROTOCOL_SSL = new BooleanConfigSuffix( ".ssl", List.of(KeyType.CONFIG)); /** * Connection timeout value in seconds. Because sometimes there is no way to detect lost TCP connection old * connections stay in open state. On most systems there is a limit on number of open connection, so this leads to * problems with establishing new connections when number of devices is high or devices data connections are * unstable. */ public static final ConfigSuffix PROTOCOL_TIMEOUT = new IntegerConfigSuffix( ".timeout", List.of(KeyType.CONFIG)); /** * Device password. Commonly used in some protocol for sending commands. */ public static final ConfigKey DEVICE_PASSWORD = new StringConfigKey( "devicePassword", List.of(KeyType.DEVICE)); /** * Device password. Commonly used in some protocol for sending commands. */ public static final ConfigSuffix PROTOCOL_DEVICE_PASSWORD = new StringConfigSuffix( ".devicePassword", List.of(KeyType.CONFIG)); /** * Default protocol mask to use. Currently used only by Skypatrol protocol. */ public static final ConfigSuffix PROTOCOL_MASK = new IntegerConfigSuffix( ".mask", List.of(KeyType.CONFIG)); /** * Custom message length. Currently used only by H2 protocol for specifying binary message length. */ public static final ConfigSuffix PROTOCOL_MESSAGE_LENGTH = new IntegerConfigSuffix( ".messageLength", List.of(KeyType.CONFIG)); /** * Enable extended functionality for the protocol. The reason it's disabled by default is that not all devices * support it. */ public static final ConfigSuffix PROTOCOL_EXTENDED = new BooleanConfigSuffix( ".extended", List.of(KeyType.CONFIG)); /** * Decode string as UTF8 instead of ASCII. Only applicable for some protocols. */ public static final ConfigSuffix PROTOCOL_UTF8 = new BooleanConfigSuffix( ".utf8", List.of(KeyType.CONFIG)); /** * Enable CAN decoding for the protocol. Similar to 'extended' configuration, it's not supported for some devices. */ public static final ConfigSuffix PROTOCOL_CAN = new BooleanConfigSuffix( ".can", List.of(KeyType.CONFIG)); /** * Indicates whether server acknowledgement is required. Only applicable for some protocols. */ public static final ConfigSuffix PROTOCOL_ACK = new BooleanConfigSuffix( ".ack", List.of(KeyType.CONFIG, KeyType.DEVICE), false); /** * Ignore device reported fix time. Useful in case some devices report invalid time. Currently only available for * GL200 protocol. */ public static final ConfigSuffix PROTOCOL_IGNORE_FIX_TIME = new BooleanConfigSuffix( ".ignoreFixTime", List.of(KeyType.CONFIG)); /** * Decode additional TK103 attributes. Not supported for some devices. */ public static final ConfigSuffix PROTOCOL_DECODE_LOW = new BooleanConfigSuffix( ".decodeLow", List.of(KeyType.CONFIG)); /** * Use long date format for Atrack protocol. */ public static final ConfigSuffix PROTOCOL_LONG_DATE = new BooleanConfigSuffix( ".longDate", List.of(KeyType.CONFIG)); /** * Use decimal fuel value format for Atrack protocol. */ public static final ConfigSuffix PROTOCOL_DECIMAL_FUEL = new BooleanConfigSuffix( ".decimalFuel", List.of(KeyType.CONFIG)); /** * Indicates additional custom attributes for Atrack protocol. */ public static final ConfigSuffix PROTOCOL_CUSTOM = new BooleanConfigSuffix( ".custom", List.of(KeyType.CONFIG)); /** * Custom format string for Atrack protocol. */ public static final ConfigSuffix PROTOCOL_FORM = new StringConfigSuffix( ".form", List.of(KeyType.CONFIG)); /** * Protocol configuration. Required for some devices for decoding incoming data. */ public static final ConfigSuffix PROTOCOL_CONFIG = new StringConfigSuffix( ".config", List.of(KeyType.CONFIG)); /** * Alarm mapping for Atrack protocol. */ public static final ConfigSuffix PROTOCOL_ALARM_MAP = new StringConfigSuffix( ".alarmMap", List.of(KeyType.CONFIG)); /** * Indicates whether TAIP protocol should have prefixes for messages. */ public static final ConfigSuffix PROTOCOL_PREFIX = new BooleanConfigSuffix( ".prefix", List.of(KeyType.CONFIG)); /** * Some devices require server address confirmation. Use this parameter to configure correct public address. */ public static final ConfigSuffix PROTOCOL_SERVER = new StringConfigSuffix( ".server", List.of(KeyType.CONFIG)); /** * Protocol type for Suntech. */ public static final ConfigKey PROTOCOL_TYPE = new IntegerConfigKey( "suntech.protocolType", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * Suntech HBM configuration value. */ public static final ConfigKey PROTOCOL_HBM = new BooleanConfigKey( "suntech.hbm", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * Format includes ADC value. */ public static final ConfigSuffix PROTOCOL_INCLUDE_ADC = new BooleanConfigSuffix( ".includeAdc", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * Format includes RPM value. */ public static final ConfigSuffix PROTOCOL_INCLUDE_RPM = new BooleanConfigSuffix( ".includeRpm", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * Format includes temperature values. */ public static final ConfigSuffix PROTOCOL_INCLUDE_TEMPERATURE = new BooleanConfigSuffix( ".includeTemp", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * Disable commands for the protocol. Not all protocols support this option. */ public static final ConfigSuffix PROTOCOL_DISABLE_COMMANDS = new BooleanConfigSuffix( ".disableCommands", List.of(KeyType.CONFIG)); /** * Protocol format. Used by protocols that have configurable message format. */ public static final ConfigSuffix PROTOCOL_FORMAT = new StringConfigSuffix( ".format", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * Protocol date format. Used by protocols that have configurable date format. */ public static final ConfigSuffix PROTOCOL_DATE_FORMAT = new StringConfigSuffix( ".dateFormat", List.of(KeyType.DEVICE)); /** * Device time zone. Most devices report UTC time, but in some cases devices report local time, so this parameter * needs to be configured for the server to be able to decode the time correctly. */ public static final ConfigKey DECODER_TIMEZONE = new StringConfigKey( "decoder.timezone", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * ORBCOMM API access id. */ public static final ConfigKey ORBCOMM_ACCESS_ID = new StringConfigKey( "orbcomm.accessId", List.of(KeyType.CONFIG)); /** * ORBCOMM API password. */ public static final ConfigKey ORBCOMM_PASSWORD = new StringConfigKey( "orbcomm.password", List.of(KeyType.CONFIG)); /** * Use alternative format for the protocol of commands. */ public static final ConfigSuffix PROTOCOL_ALTERNATIVE = new BooleanConfigSuffix( ".alternative", List.of(KeyType.CONFIG, KeyType.DEVICE), false); /** * Protocol format includes a language field. */ public static final ConfigSuffix PROTOCOL_LANGUAGE = new BooleanConfigSuffix( ".language", List.of(KeyType.CONFIG, KeyType.DEVICE), false); /** * If not zero, enable buffering of incoming data to handle ordering locations. The value is threshold for * buffering in milliseconds. */ public static final ConfigKey SERVER_BUFFERING_THRESHOLD = new LongConfigKey( "server.buffering.threshold", List.of(KeyType.CONFIG)); /** * Server wide connection timeout value in seconds. See protocol timeout for more information. */ public static final ConfigKey SERVER_TIMEOUT = new IntegerConfigKey( "server.timeout", List.of(KeyType.CONFIG)); /** * Send device responses immediately before writing it in the database. */ public static final ConfigKey SERVER_INSTANT_ACKNOWLEDGEMENT = new BooleanConfigKey( "server.instantAcknowledgement", List.of(KeyType.CONFIG)); /** * Address for uploading aggregated anonymous usage statistics. Uploaded information is the same you can see on the * statistics screen in the web app. It does not include any sensitive (e.g. locations). */ public static final ConfigKey SERVER_STATISTICS = new StringConfigKey( "server.statistics", List.of(KeyType.CONFIG), "https://www.traccar.org/analytics/"); /** * Fuel drop threshold value. When fuel level drops from one position to another for more the value, an event is * generated. */ public static final ConfigKey EVENT_FUEL_DROP_THRESHOLD = new DoubleConfigKey( "fuelDropThreshold", List.of(KeyType.SERVER, KeyType.DEVICE), 0.0); /** * Fuel increase threshold value. When fuel level increases from one position to another for more the value, an * event is generated. */ public static final ConfigKey EVENT_FUEL_INCREASE_THRESHOLD = new DoubleConfigKey( "fuelIncreaseThreshold", List.of(KeyType.SERVER, KeyType.DEVICE), 0.0); /** * Speed limit value in knots. */ public static final ConfigKey EVENT_OVERSPEED_LIMIT = new DoubleConfigKey( "speedLimit", List.of(KeyType.SERVER, KeyType.DEVICE), 0.0); /** * Disable device sharing on the server. */ public static final ConfigKey DEVICE_SHARE_DISABLE = new BooleanConfigKey( "disableShare", List.of(KeyType.SERVER)); /** * Speed limit threshold multiplier. For example, if the speed limit is 100, but we only want to generate an event * if the speed is higher than 105, this parameter can be set to 1.05. Default multiplier is 1.0. */ public static final ConfigKey EVENT_OVERSPEED_THRESHOLD_MULTIPLIER = new DoubleConfigKey( "event.overspeed.thresholdMultiplier", List.of(KeyType.CONFIG), 1.0); /** * Minimal over speed duration to trigger the event. Value in seconds. */ public static final ConfigKey EVENT_OVERSPEED_MINIMAL_DURATION = new LongConfigKey( "event.overspeed.minimalDuration", List.of(KeyType.CONFIG)); /** * Relevant only for geofence speed limits. Use the lowest speed limit from all geofences. */ public static final ConfigKey EVENT_OVERSPEED_PREFER_LOWEST = new BooleanConfigKey( "event.overspeed.preferLowest", List.of(KeyType.CONFIG)); /** * Driver behavior acceleration threshold. Value is in meter per second squared. */ public static final ConfigKey EVENT_BEHAVIOR_ACCELERATION_THRESHOLD = new DoubleConfigKey( "event.behavior.accelerationThreshold", List.of(KeyType.CONFIG)); /** * Driver behavior braking threshold. Value is in meter per second squared. */ public static final ConfigKey EVENT_BEHAVIOR_BRAKING_THRESHOLD = new DoubleConfigKey( "event.behavior.brakingThreshold", List.of(KeyType.CONFIG)); /** * Do not generate alert event if same alert was present in last known location. */ public static final ConfigKey EVENT_IGNORE_DUPLICATE_ALERTS = new BooleanConfigKey( "event.ignoreDuplicateAlerts", List.of(KeyType.CONFIG), true); /** * If set to true, invalid positions will be considered for motion logic. */ public static final ConfigKey EVENT_MOTION_PROCESS_INVALID_POSITIONS = new BooleanConfigKey( "event.motion.processInvalidPositions", List.of(KeyType.CONFIG, KeyType.DEVICE), false); /** * If the speed is above specified value, the object is considered to be in motion. Default value is 0.01 knots. */ public static final ConfigKey EVENT_MOTION_SPEED_THRESHOLD = new DoubleConfigKey( "event.motion.speedThreshold", List.of(KeyType.CONFIG, KeyType.DEVICE), 0.01); /** * Global polyline geofence distance. Within that distance from the polyline, point is considered within the * geofence. Each individual geofence can also has 'polylineDistance' attribute which will take precedence. */ public static final ConfigKey GEOFENCE_POLYLINE_DISTANCE = new DoubleConfigKey( "geofence.polylineDistance", List.of(KeyType.CONFIG), 25.0); /** * Enable in-memory database instead of an SQL database. */ public static final ConfigKey DATABASE_MEMORY = new BooleanConfigKey( "database.memory", List.of(KeyType.CONFIG)); /** * Path to the database driver JAR file. Traccar includes drivers for MySQL, PostgreSQL and H2 databases. If you use * one of those, you don't need to specify this parameter. */ public static final ConfigKey DATABASE_DRIVER_FILE = new StringConfigKey( "database.driverFile", List.of(KeyType.CONFIG)); /** * Database driver Java class. For H2 use 'org.h2.Driver'. MySQL driver class name is 'com.mysql.jdbc.Driver'. */ public static final ConfigKey DATABASE_DRIVER = new StringConfigKey( "database.driver", List.of(KeyType.CONFIG)); /** * Database connection URL. By default Traccar uses H2 database. */ public static final ConfigKey DATABASE_URL = new StringConfigKey( "database.url", List.of(KeyType.CONFIG)); /** * Database user name. Default administrator user for H2 database is 'sa'. */ public static final ConfigKey DATABASE_USER = new StringConfigKey( "database.user", List.of(KeyType.CONFIG)); /** * Database user password. Default password for H2 admin (sa) user is empty. */ public static final ConfigKey DATABASE_PASSWORD = new StringConfigKey( "database.password", List.of(KeyType.CONFIG)); /** * Path to Liquibase master changelog file. */ public static final ConfigKey DATABASE_CHANGELOG = new StringConfigKey( "database.changelog", List.of(KeyType.CONFIG), "./schema/changelog-master.xml"); /** * Database connection pool size. Default value is defined by the HikariCP library. */ public static final ConfigKey DATABASE_MAX_POOL_SIZE = new IntegerConfigKey( "database.maxPoolSize", List.of(KeyType.CONFIG)); /** * SQL query to check connection status. Default value is 'SELECT 1'. For Oracle database you can use * 'SELECT 1 FROM DUAL'. */ public static final ConfigKey DATABASE_CHECK_CONNECTION = new StringConfigKey( "database.checkConnection", List.of(KeyType.CONFIG), "SELECT 1"); /** * Store original HEX or string data as "raw" attribute in the corresponding position. */ public static final ConfigKey DATABASE_SAVE_ORIGINAL = new BooleanConfigKey( "database.saveOriginal", List.of(KeyType.CONFIG)); /** * Throttle unknown device database queries when it sends repeated requests. */ public static final ConfigKey DATABASE_THROTTLE_UNKNOWN = new BooleanConfigKey( "database.throttleUnknown", List.of(KeyType.CONFIG)); /** * Automatically register unknown devices in the database. */ public static final ConfigKey DATABASE_REGISTER_UNKNOWN = new BooleanConfigKey( "database.registerUnknown", List.of(KeyType.CONFIG)); /** * Default category for auto-registered devices. */ public static final ConfigKey DATABASE_REGISTER_UNKNOWN_DEFAULT_CATEGORY = new StringConfigKey( "database.registerUnknown.defaultCategory", List.of(KeyType.CONFIG)); /** * The group id assigned to auto-registered devices. */ public static final ConfigKey DATABASE_REGISTER_UNKNOWN_DEFAULT_GROUP_ID = new LongConfigKey( "database.registerUnknown.defaultGroupId", List.of(KeyType.CONFIG)); /** * Automatically register unknown devices with regex filter. */ public static final ConfigKey DATABASE_REGISTER_UNKNOWN_REGEX = new StringConfigKey( "database.registerUnknown.regex", List.of(KeyType.CONFIG), "\\w{3,15}"); /** * Store empty messages as positions. For example, heartbeats. */ public static final ConfigKey DATABASE_SAVE_EMPTY = new BooleanConfigKey( "database.saveEmpty", List.of(KeyType.CONFIG)); /** * Device limit for self registered users. Default value is -1, which indicates no limit. */ public static final ConfigKey USERS_DEFAULT_DEVICE_LIMIT = new IntegerConfigKey( "users.defaultDeviceLimit", List.of(KeyType.CONFIG), -1); /** * Default user expiration for self registered users. Value is in days. By default no expiration is set. */ public static final ConfigKey USERS_DEFAULT_EXPIRATION_DAYS = new IntegerConfigKey( "users.defaultExpirationDays", List.of(KeyType.CONFIG)); /** * LDAP server URL. For more info check LDAP config. */ public static final ConfigKey LDAP_URL = new StringConfigKey( "ldap.url", List.of(KeyType.CONFIG)); /** * LDAP server login. */ public static final ConfigKey LDAP_USER = new StringConfigKey( "ldap.user", List.of(KeyType.CONFIG)); /** * LDAP server password. */ public static final ConfigKey LDAP_PASSWORD = new StringConfigKey( "ldap.password", List.of(KeyType.CONFIG)); /** * Force LDAP authentication. */ public static final ConfigKey LDAP_FORCE = new BooleanConfigKey( "ldap.force", List.of(KeyType.CONFIG)); /** * LDAP user search base. */ public static final ConfigKey LDAP_BASE = new StringConfigKey( "ldap.base", List.of(KeyType.CONFIG)); /** * LDAP attribute used as user id. Default value is 'uid'. */ public static final ConfigKey LDAP_ID_ATTRIBUTE = new StringConfigKey( "ldap.idAttribute", List.of(KeyType.CONFIG), "uid"); /** * LDAP attribute used as username. Default value is 'cn'. */ public static final ConfigKey LDAP_NAME_ATTRIBUTE = new StringConfigKey( "ldap.nameAttribute", List.of(KeyType.CONFIG), "cn"); /** * LDAP attribute used as user email. Default value is 'mail'. */ public static final ConfigKey LDAP_MAIN_ATTRIBUTE = new StringConfigKey( "ldap.mailAttribute", List.of(KeyType.CONFIG), "mail"); /** * LDAP custom search filter. If not specified, '({idAttribute}=:login)' will be used as a filter. */ public static final ConfigKey LDAP_SEARCH_FILTER = new StringConfigKey( "ldap.searchFilter", List.of(KeyType.CONFIG)); /** * LDAP custom admin search filter. */ public static final ConfigKey LDAP_ADMIN_FILTER = new StringConfigKey( "ldap.adminFilter", List.of(KeyType.CONFIG)); /** * LDAP admin user group. Used if custom admin filter is not specified. */ public static final ConfigKey LDAP_ADMIN_GROUP = new StringConfigKey( "ldap.adminGroup", List.of(KeyType.CONFIG)); /** * Force OpenID Connect authentication. When enabled, the Traccar login page will be skipped * and users are redirected to the OpenID Connect provider. */ public static final ConfigKey OPENID_FORCE = new BooleanConfigKey( "openid.force", List.of(KeyType.CONFIG)); /** * OpenID Connect Client ID. * This is a unique ID assigned to each application you register with your identity provider. * Required to enable SSO. */ public static final ConfigKey OPENID_CLIENT_ID = new StringConfigKey( "openid.clientId", List.of(KeyType.CONFIG)); /** * OpenID Connect Client Secret. * This is a secret assigned to each application you register with your identity provider. * Required to enable SSO. */ public static final ConfigKey OPENID_CLIENT_SECRET = new StringConfigKey( "openid.clientSecret", List.of(KeyType.CONFIG)); /** * OpenID Connect Issuer (Base) URL. * This is used to automatically configure the authorization, token and user info URLs if provided. */ public static final ConfigKey OPENID_ISSUER_URL = new StringConfigKey( "openid.issuerUrl", List.of(KeyType.CONFIG)); /** * OpenID Connect Authorization URL. * This can usually be found in the documentation of your identity provider or by using the well-known * configuration endpoint, e.g. https://auth.example.com/.well-known/openid-configuration * Required to enable SSO if openid.issuerUrl is not set. */ public static final ConfigKey OPENID_AUTH_URL = new StringConfigKey( "openid.authUrl", List.of(KeyType.CONFIG)); /** * OpenID Connect Token URL. * This can be found in the same ways at openid.authUrl. * Required to enable SSO if openid.issuerUrl is not set. */ public static final ConfigKey OPENID_TOKEN_URL = new StringConfigKey( "openid.tokenUrl", List.of(KeyType.CONFIG)); /** * OpenID Connect User Info URL. * This can be found in the same ways at openid.authUrl. * Required to enable SSO if openid.issuerUrl is not set. */ public static final ConfigKey OPENID_USERINFO_URL = new StringConfigKey( "openid.userInfoUrl", List.of(KeyType.CONFIG)); /** * OpenID Connect group to restrict access to. * If this is not provided, all OpenID users will have access to Traccar. * This option will only work if your OpenID provider supports the groups scope. */ public static final ConfigKey OPENID_ALLOW_GROUP = new StringConfigKey( "openid.allowGroup", List.of(KeyType.CONFIG)); /** * OpenID Connect group to grant admin access. * If this is not provided, no groups will be granted admin access. * This option will only work if your OpenID provider supports the groups scope. */ public static final ConfigKey OPENID_ADMIN_GROUP = new StringConfigKey( "openid.adminGroup", List.of(KeyType.CONFIG)); /** * If no data is reported by a device for the given amount of time, status changes from online to unknown. Value is * in seconds. Default timeout is 10 minutes. */ public static final ConfigKey STATUS_TIMEOUT = new LongConfigKey( "status.timeout", List.of(KeyType.CONFIG), 600L); /** * List of protocol names to ignore offline status. Can be useful to not trigger status change when devices are * configured to disconnect after reporting a batch of data. */ public static final ConfigKey STATUS_IGNORE_OFFLINE = new StringConfigKey( "status.ignoreOffline", List.of(KeyType.CONFIG)); /** * Path to the media folder. Server stores audio, video and photo files in that folder. Sub-folders will be * automatically created for each device by unique id. */ public static final ConfigKey MEDIA_PATH = new StringConfigKey( "media.path", List.of(KeyType.CONFIG), "./media"); /** * Optional parameter to specify network interface for web interface to bind to. By default server will bind to all * available interfaces. */ public static final ConfigKey WEB_ADDRESS = new StringConfigKey( "web.address", List.of(KeyType.CONFIG)); /** * Web interface TCP port number. By default, Traccar uses port 8082. To avoid specifying port in the browser you * can set it to 80 (default HTTP port). */ public static final ConfigKey WEB_PORT = new IntegerConfigKey( "web.port", List.of(KeyType.CONFIG), 8082); /** * Maximum API requests per second. Above this limit requests and delayed and throttled. */ public static final ConfigKey WEB_MAX_REQUESTS_PER_SECOND = new IntegerConfigKey( "web.maxRequestsPerSec", List.of(KeyType.CONFIG)); /** * Maximum API request duration in seconds. */ public static final ConfigKey WEB_MAX_REQUEST_SECONDS = new IntegerConfigKey( "web.maxRequestSec", List.of(KeyType.CONFIG), 600); /** * Path to the web app folder. */ public static final ConfigKey WEB_PATH = new StringConfigKey( "web.path", List.of(KeyType.CONFIG), "./web"); /** * Path to a folder with overrides. It can be used for branding to keep custom logos in a separate place. */ public static final ConfigKey WEB_OVERRIDE = new StringConfigKey( "web.override", List.of(KeyType.CONFIG), "./override"); /** * WebSocket connection timeout in milliseconds. Default timeout is 5 minutes. */ public static final ConfigKey WEB_TIMEOUT = new LongConfigKey( "web.timeout", List.of(KeyType.CONFIG), 300000L); /** * Authentication sessions timeout in seconds. By default no timeout. */ public static final ConfigKey WEB_SESSION_TIMEOUT = new IntegerConfigKey( "web.sessionTimeout", List.of(KeyType.CONFIG)); /** * Enable database access console via '/console' URL. Use only for debugging. Never use in production. */ public static final ConfigKey WEB_CONSOLE = new BooleanConfigKey( "web.console", List.of(KeyType.CONFIG)); /** * Server debug version of the web app. Not recommended to use for performance reasons. It is intended to be used * for development and debugging purposes. */ public static final ConfigKey WEB_DEBUG = new BooleanConfigKey( "web.debug", List.of(KeyType.CONFIG)); /** * A token to login as a virtual admin account. Can be used to restore access in case of issues with regular admin * login. For example, if password is lost and can't be restored. */ public static final ConfigKey WEB_SERVICE_ACCOUNT_TOKEN = new StringConfigKey( "web.serviceAccountToken", List.of(KeyType.CONFIG)); /** * Cross-origin resource sharing origin header value. */ public static final ConfigKey WEB_ORIGIN = new StringConfigKey( "web.origin", List.of(KeyType.CONFIG)); /** * Cache control header value. By default resources are cached for one hour. */ public static final ConfigKey WEB_CACHE_CONTROL = new StringConfigKey( "web.cacheControl", List.of(KeyType.CONFIG), "max-age=3600,public"); /** * Enable TOTP authentication on the server. */ public static final ConfigKey WEB_TOTP_ENABLE = new BooleanConfigKey( "totpEnable", List.of(KeyType.SERVER)); /** * Server attribute that indicates that TOTP authentication is required for new users. */ public static final ConfigKey WEB_TOTP_FORCE = new BooleanConfigKey( "totpForce", List.of(KeyType.SERVER)); /** * Host for raw data forwarding. */ public static final ConfigKey SERVER_FORWARD = new StringConfigKey( "server.forward", List.of(KeyType.CONFIG)); /** * Position forwarding format. Available options are "url", "json" and "kafka". Default is "url". */ public static final ConfigKey FORWARD_TYPE = new StringConfigKey( "forward.type", List.of(KeyType.CONFIG), "url"); /** * Position forwarding AMQP exchange. */ public static final ConfigKey FORWARD_EXCHANGE = new StringConfigKey( "forward.exchange", List.of(KeyType.CONFIG), "traccar"); /** * Position forwarding Kafka topic or AQMP Routing Key. */ public static final ConfigKey FORWARD_TOPIC = new StringConfigKey( "forward.topic", List.of(KeyType.CONFIG), "positions"); /** * URL to forward positions. Data is passed through URL parameters. For example, {uniqueId} for device identifier, * {latitude} and {longitude} for coordinates. */ public static final ConfigKey FORWARD_URL = new StringConfigKey( "forward.url", List.of(KeyType.CONFIG)); /** * Additional HTTP header, can be used for authorization. */ public static final ConfigKey FORWARD_HEADER = new StringConfigKey( "forward.header", List.of(KeyType.CONFIG)); /** * Position forwarding retrying enable. When enabled, additional attempts are made to deliver positions. If initial * delivery fails, because of an unreachable server or an HTTP response different from '2xx', the software waits * for 'forward.retry.delay' milliseconds to retry delivery. On subsequent failures, this delay is duplicated. * If forwarding is retried for 'forward.retry.count', retrying is canceled and the position is dropped. Positions * pending to be delivered are limited to 'forward.retry.limit'. If this limit is reached, positions get discarded. */ public static final ConfigKey FORWARD_RETRY_ENABLE = new BooleanConfigKey( "forward.retry.enable", List.of(KeyType.CONFIG)); /** * Position forwarding retry first delay in milliseconds. * Can be set to anything greater than 0. Defaults to 100 milliseconds. */ public static final ConfigKey FORWARD_RETRY_DELAY = new IntegerConfigKey( "forward.retry.delay", List.of(KeyType.CONFIG), 100); /** * Position forwarding retry maximum retries. * Can be set to anything greater than 0. Defaults to 10 retries. */ public static final ConfigKey FORWARD_RETRY_COUNT = new IntegerConfigKey( "forward.retry.count", List.of(KeyType.CONFIG), 10); /** * Position forwarding retry pending positions limit. * Can be set to anything greater than 0. Defaults to 100 positions. */ public static final ConfigKey FORWARD_RETRY_LIMIT = new IntegerConfigKey( "forward.retry.limit", List.of(KeyType.CONFIG), 100); /** * Events forwarding format. Available options are "json" and "kafka". Default is "json". */ public static final ConfigKey EVENT_FORWARD_TYPE = new StringConfigKey( "event.forward.type", List.of(KeyType.CONFIG), "json"); /** * Events forwarding AMQP exchange. */ public static final ConfigKey EVENT_FORWARD_EXCHANGE = new StringConfigKey( "event.forward.exchange", List.of(KeyType.CONFIG), "traccar"); /** * Events forwarding Kafka topic or AQMP Routing Key. */ public static final ConfigKey EVENT_FORWARD_TOPIC = new StringConfigKey( "event.forward.topic", List.of(KeyType.CONFIG), "events"); /** * Events forwarding URL. */ public static final ConfigKey EVENT_FORWARD_URL = new StringConfigKey( "event.forward.url", List.of(KeyType.CONFIG)); /** * Events forwarding headers. Example value: * FirstHeader: hello * SecondHeader: world */ public static final ConfigKey EVENT_FORWARD_HEADERS = new StringConfigKey( "event.forward.header", List.of(KeyType.CONFIG)); /** * Root folder for all template files. */ public static final ConfigKey TEMPLATES_ROOT = new StringConfigKey( "templates.root", List.of(KeyType.CONFIG), "templates"); /** * Log emails instead of sending them via SMTP. Intended for testing purposes only. */ public static final ConfigKey MAIL_DEBUG = new BooleanConfigKey( "mail.debug", List.of(KeyType.CONFIG)); /** * Restrict global SMTP configuration to system messages only (e.g. password reset). */ public static final ConfigKey MAIL_SMTP_SYSTEM_ONLY = new BooleanConfigKey( "mail.smtp.systemOnly", List.of(KeyType.CONFIG)); /** * Force SMTP settings from the config file and ignore user attributes. */ public static final ConfigKey MAIL_SMTP_IGNORE_USER_CONFIG = new BooleanConfigKey( "mail.smtp.ignoreUserConfig", List.of(KeyType.CONFIG)); /** * The SMTP server to connect to. */ public static final ConfigKey MAIL_SMTP_HOST = new StringConfigKey( "mail.smtp.host", List.of(KeyType.CONFIG, KeyType.USER)); /** * The SMTP server port to connect. Defaults to 25. */ public static final ConfigKey MAIL_SMTP_PORT = new IntegerConfigKey( "mail.smtp.port", List.of(KeyType.CONFIG, KeyType.USER), 25); /** * Email transport protocol. Default value is "smtp". */ public static final ConfigKey MAIL_TRANSPORT_PROTOCOL = new StringConfigKey( "mail.transport.protocol", List.of(KeyType.CONFIG, KeyType.USER), "smtp"); /** * If true, enables the use of the STARTTLS command (if supported by the server) to switch the connection to a * TLS-protected connection before issuing any login commands. */ public static final ConfigKey MAIL_SMTP_STARTTLS_ENABLE = new BooleanConfigKey( "mail.smtp.starttls.enable", List.of(KeyType.CONFIG, KeyType.USER)); /** * If true, requires the use of the STARTTLS command. If the server doesn't support the STARTTLS command, or the * command fails, the connect method will fail. */ public static final ConfigKey MAIL_SMTP_STARTTLS_REQUIRED = new BooleanConfigKey( "mail.smtp.starttls.required", List.of(KeyType.CONFIG, KeyType.USER)); /** * If set to true, use SSL to connect and use the SSL port by default. */ public static final ConfigKey MAIL_SMTP_SSL_ENABLE = new BooleanConfigKey( "mail.smtp.ssl.enable", List.of(KeyType.CONFIG, KeyType.USER)); /** * If set to "*", all hosts are trusted. If set to a whitespace separated list of hosts, those hosts are trusted. * Otherwise, trust depends on the certificate the server presents. */ public static final ConfigKey MAIL_SMTP_SSL_TRUST = new StringConfigKey( "mail.smtp.ssl.trust", List.of(KeyType.CONFIG, KeyType.USER)); /** * Specifies the SSL protocols that will be enabled for SSL connections. */ public static final ConfigKey MAIL_SMTP_SSL_PROTOCOLS = new StringConfigKey( "mail.smtp.ssl.protocols", List.of(KeyType.CONFIG, KeyType.USER)); /** * SMTP connection username. */ public static final ConfigKey MAIL_SMTP_USERNAME = new StringConfigKey( "mail.smtp.username", List.of(KeyType.CONFIG, KeyType.USER)); /** * SMTP connection password. */ public static final ConfigKey MAIL_SMTP_PASSWORD = new StringConfigKey( "mail.smtp.password", List.of(KeyType.CONFIG, KeyType.USER)); /** * Email address to use for SMTP MAIL command. */ public static final ConfigKey MAIL_SMTP_FROM = new StringConfigKey( "mail.smtp.from", List.of(KeyType.CONFIG, KeyType.USER)); /** * The personal name for the email from address. */ public static final ConfigKey MAIL_SMTP_FROM_NAME = new StringConfigKey( "mail.smtp.fromName", List.of(KeyType.CONFIG, KeyType.USER)); /** * SMS API service full URL. Enables SMS commands and notifications. */ public static final ConfigKey SMS_HTTP_URL = new StringConfigKey( "sms.http.url", List.of(KeyType.CONFIG)); /** * SMS API authorization header name. Default value is 'Authorization'. */ public static final ConfigKey SMS_HTTP_AUTHORIZATION_HEADER = new StringConfigKey( "sms.http.authorizationHeader", List.of(KeyType.CONFIG), "Authorization"); /** * SMS API authorization header value. This value takes precedence over user and password. */ public static final ConfigKey SMS_HTTP_AUTHORIZATION = new StringConfigKey( "sms.http.authorization", List.of(KeyType.CONFIG)); /** * SMS API basic authentication user. */ public static final ConfigKey SMS_HTTP_USER = new StringConfigKey( "sms.http.user", List.of(KeyType.CONFIG)); /** * SMS API basic authentication password. */ public static final ConfigKey SMS_HTTP_PASSWORD = new StringConfigKey( "sms.http.password", List.of(KeyType.CONFIG)); /** * SMS API body template. Placeholders {phone} and {message} can be used in the template. * If value starts with '{' or '[', server automatically assumes JSON format. */ public static final ConfigKey SMS_HTTP_TEMPLATE = new StringConfigKey( "sms.http.template", List.of(KeyType.CONFIG)); /** * AWS Access Key with SNS permission. */ public static final ConfigKey SMS_AWS_ACCESS = new StringConfigKey( "sms.aws.access", List.of(KeyType.CONFIG)); /** * AWS Secret Access Key with SNS permission. */ public static final ConfigKey SMS_AWS_SECRET = new StringConfigKey( "sms.aws.secret", List.of(KeyType.CONFIG)); /** * AWS Region for SNS service. * Make sure to use regions that are supported for messaging. */ public static final ConfigKey SMS_AWS_REGION = new StringConfigKey( "sms.aws.region", List.of(KeyType.CONFIG)); /** * Enabled notification options. Comma-separated string is expected. * Example: web,mail,sms */ public static final ConfigKey NOTIFICATOR_TYPES = new StringConfigKey( "notificator.types", List.of(KeyType.CONFIG), "web,mail,command"); /** * If the event time is too old, we should not send notifications. This parameter is the threshold value in * milliseconds. Default value is 15 minutes. */ public static final ConfigKey NOTIFICATOR_TIME_THRESHOLD = new LongConfigKey( "notificator.timeThreshold", List.of(KeyType.CONFIG), 15 * 60 * 1000L); /** * Traccar notification API key. */ public static final ConfigKey NOTIFICATOR_TRACCAR_KEY = new StringConfigKey( "notificator.traccar.key", List.of(KeyType.CONFIG)); /** * Firebase service account JSON. */ public static final ConfigKey NOTIFICATOR_FIREBASE_SERVICE_ACCOUNT = new StringConfigKey( "notificator.firebase.serviceAccount", List.of(KeyType.CONFIG)); /** * Pushover notification user name. */ public static final ConfigKey NOTIFICATOR_PUSHOVER_USER = new StringConfigKey( "notificator.pushover.user", List.of(KeyType.CONFIG)); /** * Pushover notification user token. */ public static final ConfigKey NOTIFICATOR_PUSHOVER_TOKEN = new StringConfigKey( "notificator.pushover.token", List.of(KeyType.CONFIG)); /** * Telegram notification API key. */ public static final ConfigKey NOTIFICATOR_TELEGRAM_KEY = new StringConfigKey( "notificator.telegram.key", List.of(KeyType.CONFIG)); /** * Telegram notification chat id to post messages to. */ public static final ConfigKey NOTIFICATOR_TELEGRAM_CHAT_ID = new StringConfigKey( "notificator.telegram.chatId", List.of(KeyType.CONFIG)); /** * Telegram notification send location message. */ public static final ConfigKey NOTIFICATOR_TELEGRAM_SEND_LOCATION = new BooleanConfigKey( "notificator.telegram.sendLocation", List.of(KeyType.CONFIG)); /** * Enable user expiration email notification. */ public static final ConfigKey NOTIFICATION_EXPIRATION_USER = new BooleanConfigKey( "notification.expiration.user", List.of(KeyType.CONFIG)); /** * User expiration reminder. Value in milliseconds. */ public static final ConfigKey NOTIFICATION_EXPIRATION_USER_REMINDER = new LongConfigKey( "notification.expiration.user.reminder", List.of(KeyType.CONFIG)); /** * Enable device expiration email notification. */ public static final ConfigKey NOTIFICATION_EXPIRATION_DEVICE = new BooleanConfigKey( "notification.expiration.device", List.of(KeyType.CONFIG)); /** * Device expiration reminder. Value in milliseconds. */ public static final ConfigKey NOTIFICATION_EXPIRATION_DEVICE_REMINDER = new LongConfigKey( "notification.expiration.device.reminder", List.of(KeyType.CONFIG)); /** * Block notifications for specific users. The value should be a comma-separated list of internal user ids. */ public static final ConfigKey NOTIFICATION_BLOCK_USERS = new StringConfigKey( "notification.block.users", List.of(KeyType.CONFIG)); /** * Maximum time period for reports in seconds. Can be useful to prevent users to request unreasonably long reports. * By default, there is no limit. */ public static final ConfigKey REPORT_PERIOD_LIMIT = new LongConfigKey( "report.periodLimit", List.of(KeyType.CONFIG)); /** * Time threshold for fast reports. Fast reports are more efficient, but less accurate and missing some information. * The value is in seconds. One day by default. */ public static final ConfigKey REPORT_FAST_THRESHOLD = new LongConfigKey( "report.fastThreshold", List.of(KeyType.CONFIG), 86400L); /** * Trips less than minimal duration and minimal distance are ignored. 300 seconds and 500 meters are default. */ public static final ConfigKey REPORT_TRIP_MINIMAL_TRIP_DISTANCE = new LongConfigKey( "report.trip.minimalTripDistance", List.of(KeyType.CONFIG, KeyType.DEVICE), 500L); /** * Trips less than minimal duration and minimal distance are ignored. 300 seconds and 500 meters are default. */ public static final ConfigKey REPORT_TRIP_MINIMAL_TRIP_DURATION = new LongConfigKey( "report.trip.minimalTripDuration", List.of(KeyType.CONFIG, KeyType.DEVICE), 300L); /** * Parking less than minimal duration does not cut trip. Default 300 seconds. */ public static final ConfigKey REPORT_TRIP_MINIMAL_PARKING_DURATION = new LongConfigKey( "report.trip.minimalParkingDuration", List.of(KeyType.CONFIG, KeyType.DEVICE), 300L); /** * Gaps of more than specified time are counted as stops. Default value is one hour. */ public static final ConfigKey REPORT_TRIP_MINIMAL_NO_DATA_DURATION = new LongConfigKey( "report.trip.minimalNoDataDuration", List.of(KeyType.CONFIG, KeyType.DEVICE), 3600L); /** * Flag to enable ignition use for trips calculation. */ public static final ConfigKey REPORT_TRIP_USE_IGNITION = new BooleanConfigKey( "report.trip.useIgnition", List.of(KeyType.CONFIG, KeyType.DEVICE), false); /** * Ignore odometer value reported by the device and use server-calculated total distance instead. This is useful * if device reports invalid or zero odometer values. */ public static final ConfigKey REPORT_IGNORE_ODOMETER = new BooleanConfigKey( "report.ignoreOdometer", List.of(KeyType.CONFIG), false); /** * Boolean flag to enable or disable position filtering. */ public static final ConfigKey FILTER_ENABLE = new BooleanConfigKey( "filter.enable", List.of(KeyType.CONFIG), true); /** * Filter invalid (valid field is set to false) positions. */ public static final ConfigKey FILTER_INVALID = new BooleanConfigKey( "filter.invalid", List.of(KeyType.CONFIG)); /** * Filter zero coordinates. Zero latitude and longitude are theoretically valid values, but it practice it usually * indicates invalid GPS data. */ public static final ConfigKey FILTER_ZERO = new BooleanConfigKey( "filter.zero", List.of(KeyType.CONFIG)); /** * Filter duplicate records (duplicates are detected by time value). */ public static final ConfigKey FILTER_DUPLICATE = new BooleanConfigKey( "filter.duplicate", List.of(KeyType.CONFIG)); /** * Filter messages that do not have GPS location. If they are not filtered, they will include the last known * location. */ public static final ConfigKey FILTER_OUTDATED = new BooleanConfigKey( "filter.outdated", List.of(KeyType.CONFIG)); /** * Filter records with fix time in the future. The value is specified in seconds. Records that have fix time more * than the specified number of seconds later than current server time would be filtered out. */ public static final ConfigKey FILTER_FUTURE = new LongConfigKey( "filter.future", List.of(KeyType.CONFIG), 86400L); /** * Filter records with fix time in the past. The value is specified in seconds. Records that have fix time more * than the specified number of seconds before current server time would be filtered out. */ public static final ConfigKey FILTER_PAST = new LongConfigKey( "filter.past", List.of(KeyType.CONFIG)); /** * Filter positions with accuracy less than specified value in meters. */ public static final ConfigKey FILTER_ACCURACY = new IntegerConfigKey( "filter.accuracy", List.of(KeyType.CONFIG)); /** * Filter cell and wifi locations that are coming from geolocation provider. */ public static final ConfigKey FILTER_APPROXIMATE = new BooleanConfigKey( "filter.approximate", List.of(KeyType.CONFIG)); /** * Filter positions with exactly zero speed values. */ public static final ConfigKey FILTER_STATIC = new BooleanConfigKey( "filter.static", List.of(KeyType.CONFIG)); /** * Filter records by distance. The values is specified in meters. If the new position is less far than this value * from the last one it gets filtered out. */ public static final ConfigKey FILTER_DISTANCE = new IntegerConfigKey( "filter.distance", List.of(KeyType.CONFIG)); /** * Filter records by Maximum Speed value in knots. Can be used to filter jumps to far locations even if Position * appears valid or if Position `speed` field reported by the device is also within limits. Calculates speed from * the distance to the previous position and the elapsed time. * Tip: Shouldn't be too low. Start testing with values at about 25000. */ public static final ConfigKey FILTER_MAX_SPEED = new IntegerConfigKey( "filter.maxSpeed", List.of(KeyType.CONFIG)); /** * Filter position if time from previous position is less than specified value in seconds. */ public static final ConfigKey FILTER_MIN_PERIOD = new IntegerConfigKey( "filter.minPeriod", List.of(KeyType.CONFIG)); /** * Throttle positions if the daily limit is exceeded for the device. */ public static final ConfigKey FILTER_DAILY_LIMIT = new IntegerConfigKey( "filter.dailyLimit", List.of(KeyType.CONFIG)); /** * Throttling interval if the limit exceeded. The value is in seconds. */ public static final ConfigKey FILTER_DAILY_LIMIT_INTERVAL = new IntegerConfigKey( "filter.dailyLimitInterval", List.of(KeyType.CONFIG)); /** * If false, the server expects all locations to come sequentially (for each device). Filter checks for duplicates, * distance, speed, or time period only against the location that was last received by server. * If true, the server expects locations to come at random order (since tracking device might go offline). * Filter checks for duplicates, distance, speed, or time period against the preceding Position's. * Important: setting to true can cause potential performance issues. */ public static final ConfigKey FILTER_RELATIVE = new BooleanConfigKey( "filter.relative", List.of(KeyType.CONFIG)); /** * Time limit for the filtering in seconds. If the time difference between the last position was received by server * and a new position is received by server is more than this limit, the new position will not be filtered out. */ public static final ConfigKey FILTER_SKIP_LIMIT = new LongConfigKey( "filter.skipLimit", List.of(KeyType.CONFIG)); /** * Enable attributes skipping. Attribute skipping can be enabled in the config or device attributes. * If position contains any attribute mentioned in "filter.skipAttributes" config key, position is not filtered out. */ public static final ConfigKey FILTER_SKIP_ATTRIBUTES_ENABLE = new BooleanConfigKey( "filter.skipAttributes.enable", List.of(KeyType.CONFIG)); /** * Attribute skipping can be enabled in the config or device attributes. * If position contains any attribute mentioned in "filter.skipAttributes" config key, position is not filtered out. */ public static final ConfigKey FILTER_SKIP_ATTRIBUTES = new StringConfigKey( "filter.skipAttributes", List.of(KeyType.CONFIG, KeyType.DEVICE), ""); /** * Override device time. Possible values are 'deviceTime' and 'serverTime' */ public static final ConfigKey TIME_OVERRIDE = new StringConfigKey( "time.override", List.of(KeyType.CONFIG)); /** * List of protocols to enable. If not specified, Traccar enabled all protocols that have port numbers listed. * The value is a comma-separated list of protocol names. * Example value: teltonika,osmand */ public static final ConfigKey PROTOCOLS_ENABLE = new StringConfigKey( "protocols.enable", List.of(KeyType.CONFIG)); /** * List of protocols for overriding time. If not specified override is applied globally. List consist of protocol * names that can be separated by comma or single space character. */ public static final ConfigKey TIME_PROTOCOLS = new StringConfigKey( "time.protocols", List.of(KeyType.CONFIG)); /** * Replaces coordinates with last known if change is less than a 'coordinates.minError' meters * or more than a 'coordinates.maxError' meters. Helps to avoid coordinates jumps during parking period * or jumps to zero coordinates. */ public static final ConfigKey COORDINATES_FILTER = new BooleanConfigKey( "coordinates.filter", List.of(KeyType.CONFIG)); /** * Distance in meters. Distances below this value gets handled like explained in 'coordinates.filter'. */ public static final ConfigKey COORDINATES_MIN_ERROR = new IntegerConfigKey( "coordinates.minError", List.of(KeyType.CONFIG)); /** * Distance in meters. Distances above this value gets handled like explained in 'coordinates.filter', but only if * Position is also marked as 'invalid'. */ public static final ConfigKey COORDINATES_MAX_ERROR = new IntegerConfigKey( "coordinates.maxError", List.of(KeyType.CONFIG)); /** * Enable to save device IP addresses information. Disabled by default. */ public static final ConfigKey PROCESSING_REMOTE_ADDRESS_ENABLE = new BooleanConfigKey( "processing.remoteAddress.enable", List.of(KeyType.CONFIG)); /** * Enable copying of missing attributes from last position to the current one. Might be useful if device doesn't * send some values in every message. */ public static final ConfigKey PROCESSING_COPY_ATTRIBUTES_ENABLE = new BooleanConfigKey( "processing.copyAttributes.enable", List.of(KeyType.CONFIG)); /** * List of attributes to copy. Attributes should be separated by a comma without any spacing. * For example: alarm,ignition */ public static final ConfigKey PROCESSING_COPY_ATTRIBUTES = new StringConfigKey( "processing.copyAttributes", List.of(KeyType.CONFIG, KeyType.DEVICE)); /** * Include device attributes in the computed attribute context. */ public static final ConfigKey PROCESSING_COMPUTED_ATTRIBUTES_DEVICE_ATTRIBUTES = new BooleanConfigKey( "processing.computedAttributes.deviceAttributes", List.of(KeyType.CONFIG)); /** * Include last position attributes in the computed attribute context. */ public static final ConfigKey PROCESSING_COMPUTED_ATTRIBUTES_LAST_ATTRIBUTES = new BooleanConfigKey( "processing.computedAttributes.lastAttributes", List.of(KeyType.CONFIG)); /** * Enable local variables declaration. */ public static final ConfigKey PROCESSING_COMPUTED_ATTRIBUTES_LOCAL_VARIABLES = new BooleanConfigKey( "processing.computedAttributes.localVariables", List.of(KeyType.CONFIG)); /** * Enable loops processing. */ public static final ConfigKey PROCESSING_COMPUTED_ATTRIBUTES_LOOPS = new BooleanConfigKey( "processing.computedAttributes.loops", List.of(KeyType.CONFIG)); /** * Enable new instances creation. * When disabled, parsing a script/expression using 'new(...)' will throw a parsing exception; */ public static final ConfigKey PROCESSING_COMPUTED_ATTRIBUTES_NEW_INSTANCE_CREATION = new BooleanConfigKey( "processing.computedAttributes.newInstanceCreation", List.of(KeyType.CONFIG)); /** * Boolean flag to enable or disable reverse geocoder. */ public static final ConfigKey GEOCODER_ENABLE = new BooleanConfigKey( "geocoder.enable", List.of(KeyType.CONFIG), true); /** * Reverse geocoder type. Check reverse geocoding documentation for more info. */ public static final ConfigKey GEOCODER_TYPE = new StringConfigKey( "geocoder.type", List.of(KeyType.CONFIG), "locationiq"); /** * Geocoder server URL. Applicable only to Nominatim and Gisgraphy providers. */ public static final ConfigKey GEOCODER_URL = new StringConfigKey( "geocoder.url", List.of(KeyType.CONFIG)); /** * Provider API key. Most providers require API keys. */ public static final ConfigKey GEOCODER_KEY = new StringConfigKey( "geocoder.key", List.of(KeyType.CONFIG), "pk.689d849289c8c63708068b2ff1f63b2d"); /** * Language parameter for providers that support localization (e.g. Google and Nominatim). */ public static final ConfigKey GEOCODER_LANGUAGE = new StringConfigKey( "geocoder.language", List.of(KeyType.CONFIG)); /** * Address format string. Default value is %h %r, %t, %s, %c. See AddressFormat for more info. */ public static final ConfigKey GEOCODER_FORMAT = new StringConfigKey( "geocoder.format", List.of(KeyType.CONFIG)); /** * Cache size for geocoding results. */ public static final ConfigKey GEOCODER_CACHE_SIZE = new IntegerConfigKey( "geocoder.cacheSize", List.of(KeyType.CONFIG)); /** * Disable automatic reverse geocoding requests for all positions. */ public static final ConfigKey GEOCODER_IGNORE_POSITIONS = new BooleanConfigKey( "geocoder.ignorePositions", List.of(KeyType.CONFIG), true); /** * Boolean flag to apply reverse geocoding to invalid positions. */ public static final ConfigKey GEOCODER_PROCESS_INVALID_POSITIONS = new BooleanConfigKey( "geocoder.processInvalidPositions", List.of(KeyType.CONFIG)); /** * Optional parameter to specify minimum distance for new reverse geocoding request. If distance is less than * specified value (in meters), then Traccar will reuse last known address. */ public static final ConfigKey GEOCODER_REUSE_DISTANCE = new IntegerConfigKey( "geocoder.reuseDistance", List.of(KeyType.CONFIG)); /** * Perform geocoding when preparing reports and sending notifications. */ public static final ConfigKey GEOCODER_ON_REQUEST = new BooleanConfigKey( "geocoder.onRequest", List.of(KeyType.CONFIG), true); /** * Boolean flag to enable LBS location resolution. Some devices send cell towers information and WiFi point when GPS * location is not available. Traccar can determine coordinates based on that information using third party * services. Default value is false. */ public static final ConfigKey GEOLOCATION_ENABLE = new BooleanConfigKey( "geolocation.enable", List.of(KeyType.CONFIG)); /** * Provider to use for LBS location. Available options: google, unwired and opencellid. By default, google is * used. You have to supply a key that you get from corresponding provider. For more information see LBS geolocation * documentation. */ public static final ConfigKey GEOLOCATION_TYPE = new StringConfigKey( "geolocation.type", List.of(KeyType.CONFIG)); /** * Geolocation provider API URL address. Not required for most providers. */ public static final ConfigKey GEOLOCATION_URL = new StringConfigKey( "geolocation.url", List.of(KeyType.CONFIG)); /** * Provider API key. OpenCellID service requires API key. */ public static final ConfigKey GEOLOCATION_KEY = new StringConfigKey( "geolocation.key", List.of(KeyType.CONFIG)); /** * Boolean flag to apply geolocation to invalid positions. */ public static final ConfigKey GEOLOCATION_PROCESS_INVALID_POSITIONS = new BooleanConfigKey( "geolocation.processInvalidPositions", List.of(KeyType.CONFIG)); /** * Reuse last geolocation result if network details have not changed. */ public static final ConfigKey GEOLOCATION_REUSE = new BooleanConfigKey( "geolocation.reuse", List.of(KeyType.CONFIG)); /** * Process geolocation only when Wi-Fi information is available. This makes the result more accurate. */ public static final ConfigKey GEOLOCATION_REQUIRE_WIFI = new BooleanConfigKey( "geolocation.requireWifi", List.of(KeyType.CONFIG)); /** * Default MCC value to use if device doesn't report MCC. */ public static final ConfigKey GEOLOCATION_MCC = new IntegerConfigKey( "geolocation.mcc", List.of(KeyType.CONFIG)); /** * Default MNC value to use if device doesn't report MNC. */ public static final ConfigKey GEOLOCATION_MNC = new IntegerConfigKey( "geolocation.mnc", List.of(KeyType.CONFIG)); /** * Boolean flag to enable speed limit API to get speed limit values depending on location. Default value is false. */ public static final ConfigKey SPEED_LIMIT_ENABLE = new BooleanConfigKey( "speedLimit.enable", List.of(KeyType.CONFIG)); /** * Provider to use for speed limit. Available options: overpass. By default overpass is used. */ public static final ConfigKey SPEED_LIMIT_TYPE = new StringConfigKey( "speedLimit.type", List.of(KeyType.CONFIG)); /** * Speed limit provider API URL address. */ public static final ConfigKey SPEED_LIMIT_URL = new StringConfigKey( "speedLimit.url", List.of(KeyType.CONFIG)); /** * Search radius for speed limit. Value is in meters. Default value is 100. */ public static final ConfigKey SPEED_LIMIT_ACCURACY = new IntegerConfigKey( "speedLimit.accuracy", List.of(KeyType.CONFIG), 100); /** * Override latitude sign / hemisphere. Useful in cases where value is incorrect because of device bug. Value can be * N for North or S for South. */ public static final ConfigKey LOCATION_LATITUDE_HEMISPHERE = new StringConfigKey( "location.latitudeHemisphere", List.of(KeyType.CONFIG)); /** * Override longitude sign / hemisphere. Useful in cases where value is incorrect because of device bug. Value can * be E for East or W for West. */ public static final ConfigKey LOCATION_LONGITUDE_HEMISPHERE = new StringConfigKey( "location.longitudeHemisphere", List.of(KeyType.CONFIG)); /** * Jetty Request Log Path. * The path must include the string "yyyy_mm_dd", which is replaced with the actual date when creating and rolling * over the file. * Example: ./logs/jetty-yyyy_mm_dd.request.log */ public static final ConfigKey WEB_REQUEST_LOG_PATH = new StringConfigKey( "web.requestLog.path", List.of(KeyType.CONFIG)); /** * Set the number of days before rotated request log files are deleted. */ public static final ConfigKey WEB_REQUEST_LOG_RETAIN_DAYS = new IntegerConfigKey( "web.requestLog.retainDays", List.of(KeyType.CONFIG)); /** * Disable systemd health checks. */ public static final ConfigKey WEB_DISABLE_HEALTH_CHECK = new BooleanConfigKey( "web.disableHealthCheck", List.of(KeyType.CONFIG)); /** * If this parameter is set, Traccar will monitor drops in the number of stored messages. If it drops more than * the threshold, it will mark service as failing for systemd. Threshold is a value from 0.0 to 1.0. For example, * value 0.7 means that the number of messages in the last period is only 70% of what it was in the previous. */ public static final ConfigKey WEB_HEALTH_CHECK_DROP_THRESHOLD = new DoubleConfigKey( "web.healthCheck.dropThreshold", List.of(KeyType.CONFIG)); /** * Sets SameSite cookie attribute value. * Supported options: Lax, Strict, None. */ public static final ConfigKey WEB_SAME_SITE_COOKIE = new StringConfigKey( "web.sameSiteCookie", List.of(KeyType.CONFIG)); /** * Enables persisting Jetty session to the database */ public static final ConfigKey WEB_PERSIST_SESSION = new BooleanConfigKey( "web.persistSession", List.of(KeyType.CONFIG)); /** * Public URL for the web app. Used for notification, report link and OpenID Connect. * If not provided, Traccar will attempt to get a URL from the server IP address, but it might be a local address. */ public static final ConfigKey WEB_URL = new StringConfigKey( "web.url", List.of(KeyType.CONFIG)); /** * Show logs from unknown devices. */ public static final ConfigKey WEB_SHOW_UNKNOWN_DEVICES = new BooleanConfigKey( "web.showUnknownDevices", List.of(KeyType.CONFIG)); /** * Enable commands for a shared device. */ public static final ConfigKey WEB_SHARE_DEVICE_COMMANDS = new BooleanConfigKey( "web.shareDevice.commands", List.of(KeyType.CONFIG)); /** * Enable reports for a shared device. */ public static final ConfigKey WEB_SHARE_DEVICE_REPORTS = new BooleanConfigKey( "web.shareDevice.reports", List.of(KeyType.CONFIG)); /** * Output logging to the standard terminal output instead of a log file. */ public static final ConfigKey LOGGER_CONSOLE = new BooleanConfigKey( "logger.console", List.of(KeyType.CONFIG)); /** * Log executed SQL queries. */ public static final ConfigKey LOGGER_QUERIES = new BooleanConfigKey( "logger.queries", List.of(KeyType.CONFIG)); /** * Log file name. For rotating logs, a date is added at the end of the file name for non-current logs. */ public static final ConfigKey LOGGER_FILE = new StringConfigKey( "logger.file", List.of(KeyType.CONFIG), "./logs/tracker-server.log"); /** * Logging level. Default value is 'info'. * Available options: off, severe, warning, info, config, fine, finer, finest, all. */ public static final ConfigKey LOGGER_LEVEL = new StringConfigKey( "logger.level", List.of(KeyType.CONFIG), "info"); /** * Print full exception traces. Useful for debugging. By default shortened traces are logged. */ public static final ConfigKey LOGGER_FULL_STACK_TRACES = new BooleanConfigKey( "logger.fullStackTraces", List.of(KeyType.CONFIG)); /** * Create a new log file daily. Helps with log management. For example, downloading and cleaning logs. Enabled by * default. */ public static final ConfigKey LOGGER_ROTATE = new BooleanConfigKey( "logger.rotate", List.of(KeyType.CONFIG), true); /** * If all bytes are printable characters, log network data as text instead of HEX. */ public static final ConfigKey LOGGER_TEXT_PROTOCOL = new BooleanConfigKey( "logger.decodeTextData", List.of(KeyType.CONFIG), true); /** * Log file rotation interval, the default rotation interval is once a day. * This option is ignored if 'logger.rotate' = false * Available options: day, hour */ public static final ConfigKey LOGGER_ROTATE_INTERVAL = new StringConfigKey( "logger.rotate.interval", List.of(KeyType.CONFIG), "day"); /** * A list of position attributes to log. */ public static final ConfigKey LOGGER_ATTRIBUTES = new StringConfigKey( "logger.attributes", List.of(KeyType.CONFIG), "time,position,speed,course,accuracy,result"); /** * Broadcast method. Available options are "multicast" and "redis". By default (if the value is not * specified or does not matches available options) server disables broadcast. */ public static final ConfigKey BROADCAST_TYPE = new StringConfigKey( "broadcast.type", List.of(KeyType.CONFIG)); /** * Multicast interface. It can be either an IP address or an interface name. */ public static final ConfigKey BROADCAST_INTERFACE = new StringConfigKey( "broadcast.interface", List.of(KeyType.CONFIG)); /** * Multicast address or Redis URL for broadcasting synchronization events. */ public static final ConfigKey BROADCAST_ADDRESS = new StringConfigKey( "broadcast.address", List.of(KeyType.CONFIG)); /** * Multicast port for broadcasting synchronization events. */ public static final ConfigKey BROADCAST_PORT = new IntegerConfigKey( "broadcast.port", List.of(KeyType.CONFIG)); }