# Maintainer: David P. <megver83@parabola.nu>
# Maintainer: Jesús E. <heckyel@openmailbox.org>
# Contributor: André Silva <emulatorman@riseup.net>
# Contributor: Márcio Silva <coadde@riseup.net>
# Contributor: Nicolás Reynolds <fauno@kiwwwi.com.ar>
# Contributor: Sorin-Mihai Vârgolici <smv@yobicore.org>
# Contributor: Michał Masłowski <mtjm@mtjm.eu>
# Contributor: Luke Shumaker <lukeshu@sbcglobal.net>
# Contributor: Luke R. <g4jc@openmailbox.org>

# Based on linux package

pkgbase=linux-libre-apparmor
_pkgbasever=4.11-gnu
_pkgver=4.11.3-gnu

_replacesarchkernel=('linux%') # '%' gets replaced with _kernelname
_replacesoldkernels=() # '%' gets replaced with _kernelname
_replacesoldmodules=() # '%' gets replaced with _kernelname

_srcname=linux-${_pkgbasever%-*}
_archpkgver=${_pkgver%-*}
pkgver=${_pkgver//-/_}
pkgrel=1
rcnrel=armv7-x0
arch=('i686' 'x86_64' 'armv7h')
url="https://linux-libre.fsfla.org/"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc' 'libelf')
makedepends_armv7h=('git')
options=('!strip')
source=("https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/linux-libre-${_pkgbasever}.tar.xz"{,.sign}
        "https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_pkgbasever}-${_pkgver}.xz"{,.sign}
        "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_clut224.ppm"{,.sig}
        "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_mono.pbm"{,.sig}
        "https://repo.parabola.nu/other/linux-libre/logos/logo_linux_vga16.ppm"{,.sig}
        # the main kernel config files
        'config.i686' 'config.x86_64' 'config.armv7h'
        # pacman hook for initramfs regeneration
        '90-linux.hook'
        # standard config files for mkinitcpio ramdisk
        'linux.preset'
        '0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch'
        '0002-fix-Atmel-maXTouch-touchscreen-support.patch'
        # armv7h patches
        "https://repo.parabola.nu/other/rcn-libre/patches/${_pkgver%-*}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch"{,.sig}
        '0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch'
        '0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch'
        '0003-SMILE-Plug-device-tree-file.patch'
        '0004-fix-mvsdio-eMMC-timing.patch'
        '0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch'
        '0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch'
        '0007-set-default-cubietruck-led-triggers.patch'
        '0008-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch'
        '0009-disable-USB3-port-on-ODROID-XU.patch'
        '0010-ARM-dove-enable-ethernet-on-D3Plug.patch')
sha512sums=('f1d9138024b127385248de5c8eb72123b717bbbaba3e80bded20f073acac816a7ea979c4677ddc72252a8ec77c6a6c1d1738b1c20106f7d53ef39c9cf64c1853'
            'SKIP'
            '5110084b5579851aeae0f88a4c2e6f230926ca38dbdeab78de63c7bb4c8ac8efa40d8828baa79ca976873fc268bc560e9eebd9eff2d4d23fa3cbc66b23a4851a'
            'SKIP'
            '13cb5bc42542e7b8bb104d5f68253f6609e463b6799800418af33eb0272cc269aaa36163c3e6f0aacbdaaa1d05e2827a4a7c4a08a029238439ed08b89c564bb3'
            'SKIP'
            '267295aa0cea65684968420c68b32f1a66a22d018b9d2b2c1ef14267bcf4cb68aaf7099d073cbfefe6c25c8608bdcbbd45f7ac8893fdcecbf1e621abdfe9ecc1'
            'SKIP'
            '7a3716bfe3b9f546da309c7492f3e08f8f506813afeb1c737a474c83313d5c313cf4582b65215c2cfce3b74d9d1021c96e8badafe8f6e5b01fe28d2b5c61ae78'
            'SKIP'
            '1475d501141afc1b86b9971e682300167a7ecbfd4038c40dd209f062c07a66948ccdd72e77791906eff57549be7fc38aacae6da4e51acadc625dfe93c034f452'
            '219eb33c7344c404e0cecaa0087ed2406c25f771157f9abeee5b63f9a157af6da79d94d329d130dc66181dc888d983f12231217709322340ee9659d3a7459985'
            '42ea30517c27ce077c1893c2ee9fa3f040d008b05603220d5efa41bd8de2aa24652bae4e467c4789f576ffcc68910b73a4d8dbe73c7409c721b20793616f2fe6'
            'd6faa67f3ef40052152254ae43fee031365d0b1524aa0718b659eb75afc21a3f79ea8d62d66ea311a800109bed545bc8f79e8752319cd378eef2cbd3a09aba22'
            '2dc6b0ba8f7dbf19d2446c5c5f1823587de89f4e28e9595937dd51a87755099656f2acec50e3e2546ea633ad1bfd1c722e0c2b91eef1d609103d8abdc0a7cbaf'
            '02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af'
            'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168'
            'f5ac0362e6c79ef007be088b8138a1795937e392db7b05fa4d1cca6644d08b77b88ff7cfcc7c768c067fc7301f462fa7bdb6120e60f992486f56dd88c47c3fd9'
            'SKIP'
            'b3c214cc9adf22858f21ea8b0b919bd167257c2f624e98718d486b7fb82f1cfd17f578f799c13c26948bc2cb23e9eb6de0ef9299cbe49afb63929778eda24026'
            'db14593a4a0c0371e2cc2bcdcb0a4ac2abec96945dbb455393c5ef5140eca8ffb857dfee818087e4dfe261e9725a9e40a5d7e4c9774bca96560e3628743d7955'
            '5ed2d772ff47517b21ba5f848ee2792a85e5e2a3d80a2aa4f0eef2acc445c20c630e6033bb180754d5cfcf11b19dbfa939b14e00bbe2acaacde02f90e3ddbb48'
            '41ee45da195f7350d1c4febe21d127bccddac796adac840296a9f7ea405ad8484751658cf5174bed0ec20497d907a4429d77b0a506798136ad52c2e6e2474d0d'
            '4e4dcb143ce096971ee0d77eaf513f2013d0c23a4f24462fdb9363560860bc392893100b1fe4509101427151e5d3e643dd3f3c5769fb7da1f8182879d8c5eed3'
            '6c6d8250a44c0771035c3f0fe5fdfd2789f984b084df0b55fa2c17ff7b9aa3cd6cc0572fc84b230678c0fe40688f90c973b8af5e98c0e743aa73e2cd19102a6b'
            '178f75b381a3c67069d8ab99ad4805fac28e40a5213ea9aa7b73913540dadee905055552dd9a5541287503b49f175dd3b85445a4b6ceae7413119297cf3a2656'
            '2528481b6b1fbf7f1a39832e20ed66398cd2bc13a6bec296c351a4f571b5158c86b30993ebf450ae7a983dc82b05cd4917b19b9648665f64f328cc59cbb167fc'
            '981a24d1309910c6700aaa1d8bba866c0c3fd7cf6a15a1a4b10ec69b05072775f32ef707cbfc209355aa72237880431e74213d3b5b8c6e16247cb5d943380ad2'
            '3b17a9b3aac558f739320b50c84ecb44affbb26709b0f970b6f6e8f96b56aee644d92f61a0cf27c774a6c347dfc3676b4b657c4cac9ff678fb12c59fc7bcdc80')
validpgpkeys=(
              '474402C8C582DAFBE389C427BCB7CF877E7D47A7' # Alexandre Oliva
              '6DB9C4B4F0D8C0DC432CF6E4227CA7C556B2BA78' # David P.
)

_kernelname=${pkgbase#linux-libre}
_replacesarchkernel=("${_replacesarchkernel[@]/\%/${_kernelname}}")
_replacesoldkernels=("${_replacesoldkernels[@]/\%/${_kernelname}}")
_replacesoldmodules=("${_replacesoldmodules[@]/\%/${_kernelname}}")

case "${CARCH}" in
  i686|x86_64) KARCH=x86;;
  armv7h) KARCH=arm;;
esac

prepare() {
  cd "${srcdir}/${_srcname}"

  # add upstream patch
  if [ "${_pkgbasever}" != "${_pkgver}" ]; then
    patch -p1 -i "${srcdir}/patch-${_pkgbasever}-${_pkgver}"
  fi

  if [ "${CARCH}" = "armv7h" ]; then
    # RCN patch (CM3 firmware deblobbed and AUFS removed)
    # Note: For stability reasons, AUFS has been removed in the RCN patch.
    # We are supporting AUFS in linux-libre-pck through PCK patch.
    # See https://wiki.parabola.nu/PCK for further details.
    git apply -v "${srcdir}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch"

    # ALARM patches
    patch -p1 -i "${srcdir}/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch"
    patch -p1 -i "${srcdir}/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch"
    patch -p1 -i "${srcdir}/0003-SMILE-Plug-device-tree-file.patch"
    patch -p1 -i "${srcdir}/0004-fix-mvsdio-eMMC-timing.patch"
    patch -p1 -i "${srcdir}/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch"
    patch -p1 -i "${srcdir}/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch"
    patch -p1 -i "${srcdir}/0007-set-default-cubietruck-led-triggers.patch"
    patch -p1 -i "${srcdir}/0008-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch"
    patch -p1 -i "${srcdir}/0009-disable-USB3-port-on-ODROID-XU.patch"
    patch -p1 -i "${srcdir}/0010-ARM-dove-enable-ethernet-on-D3Plug.patch"
  fi

  # add freedo as boot logo
  install -m644 -t drivers/video/logo \
    "${srcdir}/logo_linux_"{clut224.ppm,vga16.ppm,mono.pbm}

  # add latest fixes from stable queue, if needed
  # http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git

  # maintain the TTY over USB disconnects
  # http://www.coreboot.org/EHCI_Gadget_Debug
  patch -p1 -i "${srcdir}/0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch"

  # fix Atmel maXTouch touchscreen support
  # https://labs.parabola.nu/issues/877
  # http://www.fsfla.org/pipermail/linux-libre/2015-November/003202.html
  patch -p1 -i "${srcdir}/0002-fix-Atmel-maXTouch-touchscreen-support.patch"

  cat "${srcdir}/config.${CARCH}" > ./.config

  # append pkgrel to extraversion
  sed -ri "s|^(EXTRAVERSION =.*\S).*|\1-${pkgrel}|" Makefile

  # don't run depmod on 'make install'. We'll do this ourselves in packaging
  sed -i '2iexit 0' scripts/depmod.sh

  # get kernel version
  make prepare

  # load configuration
  # Configure the kernel. Replace the line below with one of your choice.
  #make menuconfig # CLI menu for configuration
  #make nconfig # new CLI menu for configuration
  #make xconfig # X-based configuration
  #make oldconfig # using old config from previous kernel version
  # ... or manually edit .config

  # rewrite configuration
  yes "" | make config >/dev/null
}

build() {
  cd "${srcdir}/${_srcname}"

  if [ "${CARCH}" = "armv7h" ]; then
    make ${MAKEFLAGS} LOCALVERSION= zImage modules dtbs
  elif [ "${CARCH}" = "x86_64" ] || [ "${CARCH}" = "i686" ]; then
    make ${MAKEFLAGS} LOCALVERSION= bzImage modules
  fi
}

_package() {
  pkgdesc="The ${pkgbase^} kernel and modules with AppArmor support"
  [ "${pkgbase}" = "linux-libre" ] && groups=('base' 'base-openr')
  depends=('coreutils' 'linux-libre-firmware' 'kmod' 'mkinitcpio>=0.7')
  optdepends=('crda: to set the correct wireless channels of your country'
              'apparmor: to configure and enable mandatory access control for programs')
  provides=("${_replacesarchkernel[@]/%/=${_archpkgver}}" "LINUX-ABI_VERSION=${_archpkgver}" "kernel=${_archpkgver}")
  conflicts=("${_replacesarchkernel[@]}" "${_replacesoldkernels[@]}" "${_replacesoldmodules[@]}")
  replaces=("${_replacesarchkernel[@]}" "${_replacesoldkernels[@]}" "${_replacesoldmodules[@]}")
  backup=("etc/mkinitcpio.d/${pkgbase}.preset")
  install=linux.install

  cd "${srcdir}/${_srcname}"

  # get kernel version
  _kernver="$(make LOCALVERSION= kernelrelease)"
  _basekernel=${_kernver%%-*}
  _basekernel=${_basekernel%.*}

  mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
  make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
  if [ "${CARCH}" = "armv7h" ]; then
    make LOCALVERSION= INSTALL_DTBS_PATH="${pkgdir}/boot/dtbs/${pkgbase}" dtbs_install
    cp arch/$KARCH/boot/zImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
  elif [ "${CARCH}" = "x86_64" ] || [ "${CARCH}" = "i686" ]; then
    cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
  fi

  # set correct depmod command for install
  sed -e "s|%PKGBASE%|${pkgbase}|g;s|%KERNVER%|${_kernver}|g" \
    "${startdir}/${install}" > "${startdir}/${install}.pkg"
  true && install=${install}.pkg

  # install mkinitcpio preset file for kernel
  if [ "${CARCH}" = "armv7h" ]; then
    sed "s|/boot/vmlinuz-%PKGBASE%|${_kernver}|g
         s|%PKGBASE%|${pkgbase}|g" "${srcdir}/linux.preset" |
      install -D -m644 /dev/stdin "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
  elif [ "${CARCH}" = "x86_64" ] || [ "${CARCH}" = "i686" ]; then
    sed "s|%PKGBASE%|${pkgbase}|g" "${srcdir}/linux.preset" |
      install -D -m644 /dev/stdin "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
  fi

  # install pacman hook for initramfs regeneration
  sed "s|%PKGBASE%|${pkgbase}|g" "${srcdir}/90-linux.hook" |
    install -D -m644 /dev/stdin "${pkgdir}/usr/share/libalpm/hooks/90-${pkgbase}.hook"

  # remove build and source links
  rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
  # remove the firmware
  rm -rf "${pkgdir}/lib/firmware"
  # make room for external modules
  ln -s "../extramodules-${_basekernel}${_kernelname}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
  # add real version for building modules and running depmod from post_install/upgrade
  mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}"
  echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}/version"

  # Now we call depmod...
  depmod -b "${pkgdir}" -F System.map "${_kernver}"

  # move module tree /lib -> /usr/lib
  mkdir -p "${pkgdir}/usr"
  mv "${pkgdir}/lib" "${pkgdir}/usr/"

  if [ "${CARCH}" = "x86_64" ] || [ "${CARCH}" = "i686" ]; then
    # add vmlinux
    install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
  fi
}

_package-headers() {
  pkgdesc="Header files and scripts for building modules for ${pkgbase^} kernel"
  provides=("${_replacesarchkernel[@]/%/-headers=${_archpkgver}}")
  conflicts=("${_replacesarchkernel[@]/%/-headers}" "${_replacesoldkernels[@]/%/-headers}")
  replaces=("${_replacesarchkernel[@]/%/-headers}" "${_replacesoldkernels[@]/%/-headers}")

  install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"

  cd "${srcdir}/${_srcname}"
  install -D -m644 Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
  install -D -m644 kernel/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
  install -D -m644 .config \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/.config"

  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"

  for i in acpi asm-generic config crypto drm generated keys linux math-emu \
    media net pcmcia scsi soc sound trace uapi video xen; do
    cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
  done

  # copy arch includes for external modules
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}"
  cp -a arch/${KARCH}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
  if [ "${CARCH}" = "armv7h" ]; then
    for i in dove exynos omap2; do
      mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/mach-${i}"
      cp -a arch/${KARCH}/mach-${i}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/mach-${i}/"
    done
    for i in omap orion samsung versatile; do
      mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/plat-${i}"
      cp -a arch/${KARCH}/plat-${i}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/plat-${i}/"
    done
  fi

  # copy files necessary for later builds
  cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
  cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"

  # fix permissions on scripts dir
  chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"

  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"

  cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"

  if [ "${CARCH}" = "i686" ]; then
    cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
  fi

  cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"

  # add docbook makefile
  install -D -m644 Documentation/DocBook/Makefile \
    "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"

  # add dm headers
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
  cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"

  # add inotify.h
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
  cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"

  # add wireless headers
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
  cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"

  # add dvb headers for external modules
  # in reference to:
  # http://bugs.archlinux.org/task/9912
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
  cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
  # and...
  # http://bugs.archlinux.org/task/11194
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
  cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"

  # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
  # in reference to:
  # http://bugs.archlinux.org/task/13146
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
  cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
  cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"

  # add dvb headers
  # in reference to:
  # http://bugs.archlinux.org/task/20402
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
  cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
  cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
  cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"

  # add xfs and shmem for aufs building
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
  # removed in 3.17-gnu series
  # cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"

  # copy in Kconfig files
  for i in $(find . -name "Kconfig*"); do
    mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
    cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
  done

  # add objtool for external module building and enabled VALIDATION_STACK option
  if [ -f tools/objtool/objtool ];  then
      mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/tools/objtool"
      cp -a tools/objtool/objtool ${pkgdir}/usr/lib/modules/${_kernver}/build/tools/objtool/
  fi

  chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
  find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;

  # strip scripts directory
  find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
    case "$(file -bi "${binary}")" in
      *application/x-sharedlib*) # Libraries (.so)
        /usr/bin/strip ${STRIP_SHARED} "${binary}";;
      *application/x-archive*) # Libraries (.a)
        /usr/bin/strip ${STRIP_STATIC} "${binary}";;
      *application/x-executable*) # Binaries
        /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
    esac
  done

  # remove unneeded architectures
  find "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch -mindepth 1 -maxdepth 1 -type d -not -name "$KARCH" -exec rm -rf {} +

  # remove files already in docs package
  rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/kbuild/Kconfig.recursion-issue-01"
  rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/kbuild/Kconfig.recursion-issue-02"
  rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/kbuild/Kconfig.select-break"
}

_package-docs() {
  pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase^} kernel"
  provides=("${_replacesarchkernel[@]/%/-docs=${_archpkgver}}")
  conflicts=("${_replacesarchkernel[@]/%/-docs}" "${_replacesoldkernels[@]/%/-docs}")
  replaces=("${_replacesarchkernel[@]/%/-docs}" "${_replacesoldkernels[@]/%/-docs}")

  cd "${srcdir}/${_srcname}"

  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
  cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
  find "${pkgdir}" -type f -exec chmod 444 {} \;
  find "${pkgdir}" -type d -exec chmod 755 {} \;

  # remove a file already in kernel package
  rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
}

pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
for _p in ${pkgname[@]}; do
  eval "package_${_p}() {
    $(declare -f "_package${_p#${pkgbase}}")
    _package${_p#${pkgbase}}
  }"
done

# vim:set ts=8 sts=2 sw=2 et: