From 558b4244062101ef0a2d1f575d10b748c7b0fd4c Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Sun, 10 Apr 2016 18:36:56 -0300 Subject: linux-libre-lts{,-knock}: add C.H.I.P single-board computer support --- .../0001-CHIP-device-tree-file.patch | 252 +++++++++++++++++++++ libre/linux-libre-lts/PKGBUILD | 5 + 2 files changed, 257 insertions(+) create mode 100644 libre/linux-libre-lts/0001-CHIP-device-tree-file.patch (limited to 'libre') diff --git a/libre/linux-libre-lts/0001-CHIP-device-tree-file.patch b/libre/linux-libre-lts/0001-CHIP-device-tree-file.patch new file mode 100644 index 000000000..61e1476f1 --- /dev/null +++ b/libre/linux-libre-lts/0001-CHIP-device-tree-file.patch @@ -0,0 +1,252 @@ +From 45a2d06dfeaec03fd749cbe42dddf44fe1cf53e1 Mon Sep 17 00:00:00 2001 +From: André Silva +Date: Sun, 10 Apr 2016 18:08:45 -0300 +Subject: [PATCH 1/1] C.H.I.P device tree file + +This adds a dts file for the C.H.I.P. + +Signed-off-by: André Silva +--- +arch/arm/boot/dts/Makefile | 3 +- +arch/arm/boot/dts/sun5i-r8-chip.dts | 218 ++++++++++++++++++++++++++++++++++++ +2 files changed, 220 insertions(+), 1 deletion(-) +create mode 100644 arch/arm/boot/dts/sun5i-r8-chip.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 992736b..f8d18bd 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -540,7 +540,8 @@ dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a13-hsg-h702.dtb \ + sun5i-a13-olinuxino.dtb \ +- sun5i-a13-olinuxino-micro.dtb ++ sun5i-a13-olinuxino-micro.dtb \ ++ sun5i-r8-chip.dtb + dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31-app4-evb1.dtb \ + sun6i-a31-colombus.dtb \ +diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts +new file mode 100644 +index 0000000..530ab28 +--- /dev/null ++++ b/arch/arm/boot/dts/sun5i-r8-chip.dts +@@ -0,0 +1,218 @@ ++/* ++ * Copyright 2015 Free Electrons ++ * Copyright 2015 NextThing Co ++ * ++ * Maxime Ripard ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "sun5i-r8.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include ++#include ++ ++/ { ++ model = "NextThing C.H.I.P."; ++ compatible = "nextthing,chip", "allwinner,sun5i-r8"; ++ ++ aliases { ++ i2c0 = &i2c0; ++ i2c2 = &i2c2; ++ serial0 = &uart1; ++ serial1 = &uart3; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++}; ++ ++&codec { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp209: pmic@34 { ++ reg = <0x34>; ++ ++ /* ++ * The interrupt is routed through the "External Fast ++ * Interrupt Request" pin (ball G13 of the module) ++ * directly to the main interrupt controller, without ++ * any other controller interfering. ++ */ ++ interrupts = <0>; ++ }; ++}; ++ ++#include "axp209.dtsi" ++ ++&i2c2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins_a>; ++ status = "okay"; ++ ++ xio: gpio@38 { ++ compatible = "nxp,pcf8574a"; ++ reg = <0x38>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ interrupt-parent = <&pio>; ++ interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&otg_sram { ++ status = "okay"; ++}; ++ ++&pio { ++ chip_vbus_pin: chip_vbus_pin@0 { ++ allwinner,pins = "PB10"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = ; ++ allwinner,pull = ; ++ }; ++ ++ chip_id_det_pin: chip_id_det_pin@0 { ++ allwinner,pins = "PG2"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = ; ++ allwinner,pull = ; ++ }; ++}; ++ ++®_dcdc2 { ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1400000>; ++ regulator-name = "cpuvdd"; ++ regulator-always-on; ++}; ++ ++®_dcdc3 { ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-name = "corevdd"; ++ regulator-always-on; ++}; ++ ++®_ldo1 { ++ regulator-name = "rtcvdd"; ++}; ++ ++®_ldo2 { ++ regulator-min-microvolt = <2700000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "avcc"; ++ regulator-always-on; ++}; ++ ++®_ldo5 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc-1v8"; ++}; ++ ++®_usb0_vbus { ++ pinctrl-0 = <&chip_vbus_pin>; ++ vin-supply = <®_vcc5v0>; ++ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins_b>; ++ status = "okay"; ++}; ++ ++&uart3 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins_a>, ++ <&uart3_pins_cts_rts_a>; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ dr_mode = "otg"; ++ status = "okay"; ++}; ++ ++&usb_power_supply { ++ status = "okay"; ++}; ++ ++&usbphy { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&chip_id_det_pin>; ++ status = "okay"; ++ ++ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ ++ usb0_vbus_power-supply = <&usb_power_supply>; ++ usb0_vbus-supply = <®_usb0_vbus>; ++ usb1_vbus-supply = <®_vcc5v0>; ++}; diff --git a/libre/linux-libre-lts/PKGBUILD b/libre/linux-libre-lts/PKGBUILD index dcc2c59a2..729494c2c 100644 --- a/libre/linux-libre-lts/PKGBUILD +++ b/libre/linux-libre-lts/PKGBUILD @@ -49,6 +49,7 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/li # armv7h patches "https://repo.parabola.nu/other/rcn-libre/patches/${_pkgver%-*}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch" "https://repo.parabola.nu/other/rcn-libre/patches/${_pkgver%-*}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch.sig" + '0001-CHIP-device-tree-file.patch' '0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch' '0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch' '0003-SMILE-Plug-device-tree-file.patch' @@ -76,6 +77,7 @@ sha256sums=('48b2e5ea077d0a0bdcb205e67178e8eb5b2867db3b2364b701dbc801d9755324' '3d3266bd082321dccf429cc2200d1a4d870d2031546f9f591b6dfbb698294808' '3743d0478507d160f24326241831df8c4d3f2e268bcaf2f62dfe2ef5e8a69188' 'SKIP' + 'bb3113130feedd411bd0947bd8217c7643519659ddb9ca57f7b53a1a51fb67a0' '203b07cc241f2374d1e18583fc9940cc69da134f992bff65a8b376c717aa7ea7' '28fb8c937c2a0dc824ea755efba26ac5a4555f9a97d79f4e31f24b23c5eae59c' '39bfd7f6e2df0b87b52488462edb2fbcfaf9e3eb2a974fc7b3bc22147352fece' @@ -112,6 +114,9 @@ prepare() { # RCN patch (CM3 firmware deblobbed) git apply -v "${srcdir}/rcn-libre-${_pkgver%-*}-${rcnrel}.patch" + # Parabola patches + patch -p1 -i "${srcdir}/0001-CHIP-device-tree-file.patch" + # ALARM patches patch -p1 -i "${srcdir}/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch" patch -p1 -i "${srcdir}/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch" -- cgit v1.2.3