From a728b429ddb893d049cf2ece8901ed53c0cbabb5 Mon Sep 17 00:00:00 2001 From: David P Date: Fri, 16 Nov 2018 12:22:30 -0300 Subject: upgpkg: libre/linux-libre 4.19.2_gnu-1 Signed-off-by: David P --- ...6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch | 80 ---------------------- 1 file changed, 80 deletions(-) delete mode 100644 libre/linux-libre/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch (limited to 'libre/linux-libre/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch') diff --git a/libre/linux-libre/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch b/libre/linux-libre/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch deleted file mode 100644 index 6f8d546d4..000000000 --- a/libre/linux-libre/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 3e35057ab8b11c232a7c0edeea3299d53c6d600d Mon Sep 17 00:00:00 2001 -From: Peter Chen -Date: Wed, 21 Jun 2017 14:42:07 +0800 -Subject: [PATCH 12/14] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB - property - -The current dts describes USB HUB's property at USB controller's -entry, it is improper. The USB HUB should be the child node -under USB controller, and power sequence properties are under -it. Besides, using gpio pinctrl setting for USB2415's reset pin. - -Signed-off-by: Peter Chen -Signed-off-by: Joshua Clayton -Tested-by: Maciej S. Szmigiero ---- - arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 ++++++++++++-------------- - 1 file changed, 12 insertions(+), 14 deletions(-) - -diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi -index 4f27861bbb32..dead14b0d4bf 100644 ---- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi -+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi -@@ -5,6 +5,8 @@ - * Author: Fabio Estevam - */ - -+#include -+ - / { - aliases { - backlight = &backlight; -@@ -61,17 +63,6 @@ - #address-cells = <1>; - #size-cells = <0>; - -- reg_usb_h1_vbus: regulator@0 { -- compatible = "regulator-fixed"; -- reg = <0>; -- regulator-name = "usb_h1_vbus"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- enable-active-high; -- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ -- gpio = <&gpio7 12 0>; -- }; -- - reg_panel: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; -@@ -197,7 +188,7 @@ - - pinctrl_usbh: usbhgrp { - fsl,pins = < -- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 -+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 - >; - }; -@@ -268,9 +259,16 @@ - &usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh>; -- vbus-supply = <®_usb_h1_vbus>; -- clocks = <&clks IMX6QDL_CLK_CKO>; - status = "okay"; -+ -+ usb2415: hub@1 { -+ compatible = "usb424,2514"; -+ reg = <1>; -+ -+ clocks = <&clks IMX6QDL_CLK_CKO>; -+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; -+ reset-duration-us = <3000>; -+ }; - }; - - &usdhc3 { --- -2.18.0 - -- cgit v1.2.3