From 6b4c9cf5ff22e6b568b73456a6c14e0e9f8bce6c Mon Sep 17 00:00:00 2001 From: David P Date: Fri, 7 Dec 2018 11:24:19 -0300 Subject: upgpkg: libre/linux-libre-lts 4.14.86_gnu-1 Signed-off-by: David P --- ...-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch | 74 ---------------------- 1 file changed, 74 deletions(-) delete mode 100644 libre/linux-libre-lts/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch (limited to 'libre/linux-libre-lts/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch') diff --git a/libre/linux-libre-lts/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch b/libre/linux-libre-lts/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch deleted file mode 100644 index 0eaf2c470..000000000 --- a/libre/linux-libre-lts/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 29a513109fa45d1039d7f52aacb3fc4a188e60d4 Mon Sep 17 00:00:00 2001 -From: Joshua Clayton -Date: Wed, 21 Jun 2017 14:42:08 +0800 -Subject: [PATCH 13/14] ARM: dts: imx6q-evi: Fix onboard hub reset line - -Previously the onboard hub was made to work by treating its -reset gpio as a regulator enable. -Get rid of that kludge now that pwseq has added reset gpio support -Move pin muxing the hub reset pin into the usbh1 group - -Signed-off-by: Joshua Clayton -Signed-off-by: Peter Chen ---- - arch/arm/boot/dts/imx6q-evi.dts | 25 +++++++------------------ - 1 file changed, 7 insertions(+), 18 deletions(-) - -diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts -index fcd257bc5ac3..d32fa81bba95 100644 ---- a/arch/arm/boot/dts/imx6q-evi.dts -+++ b/arch/arm/boot/dts/imx6q-evi.dts -@@ -54,18 +54,6 @@ - reg = <0x10000000 0x40000000>; - }; - -- reg_usbh1_vbus: regulator-usbhubreset { -- compatible = "regulator-fixed"; -- regulator-name = "usbh1_vbus"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- enable-active-high; -- startup-delay-us = <2>; -- pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_usbh1_hubreset>; -- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; -- }; -- - reg_usb_otg_vbus: regulator-usbotgvbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; -@@ -213,12 +201,18 @@ - }; - - &usbh1 { -- vbus-supply = <®_usbh1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - dr_mode = "host"; - disable-over-current; - status = "okay"; -+ -+ usb2415host: hub@1 { -+ compatible = "usb424,2513"; -+ reg = <1>; -+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; -+ reset-duration-us = <3000>; -+ }; - }; - - &usbotg { -@@ -481,11 +475,6 @@ - MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0 - /* usbh1_b OC */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 -- >; -- }; -- -- pinctrl_usbh1_hubreset: usbh1hubresetgrp { -- fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - >; - }; --- -2.18.0 - -- cgit v1.2.3