From a63182bc739fa2ef86861a939898717e04cb7153 Mon Sep 17 00:00:00 2001 From: Isaac David Date: Fri, 9 Jun 2017 15:44:53 -0500 Subject: libre-testing/uboot4extlinux-*: new versions and configs also patch old u-boot tarballs to build with gcc7 --- .../0001-parabola-arm-modifications.patch | 371 ++++----------------- 1 file changed, 73 insertions(+), 298 deletions(-) (limited to 'libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch') diff --git a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch index 7328d1ad7..1538e9636 100644 --- a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch +++ b/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch @@ -1,275 +1,63 @@ -diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg ---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D -+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 -+ -+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3 -+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63 -+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -+ -+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -+ -+ -+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -+ -+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -+ -+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -+ -+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -+ -+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -+ -+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251 -+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200 -+ -+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45 -+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744 -+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336 -+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630 -+ -+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038 -+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -+ -+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000 -+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D -+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg ---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,84 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Device Configuration Data (DCD) -+ * -+ * Each entry must have the format: -+ * Addr-type Address Value -+ * -+ * where: -+ * Addr-type register length (1,2 or 4 bytes) -+ * Address absolute address of the register -+ * value value to be stored in the register -+ */ -+ -+/* -+ * DDR3 settings -+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6DL ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 32 bits x16/x32 -+ */ -+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 -+ -+/* (differential input) */ -+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -+/* (differential input) */ -+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -+/* disable ddr pullups */ -+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 -+ -+/* Read data DQ Byte0-3 delay */ -+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 -diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg ---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,29 @@ -+/* -+ * Copyright (C) 2013 Boundary Devices -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Refer doc/README.imximage for more details about how-to configure -+ * and create imximage boot image -+ * -+ * The syntax is taken as close as possible with the kwbimage -+ */ -+ -+/* image version */ -+IMAGE_VERSION 2 -+ -+/* -+ * Boot Device : one of -+ * spi, sd (the board has no nand neither onenand) -+ */ -+BOOT_FROM sd -+ -+#define __ASSEMBLY__ -+#include -+#include "asm/arch/mx6-ddr.h" -+#include "asm/arch/iomux.h" -+#include "asm/arch/crm_regs.h" -+ -+#include "ddr-setup_dl.cfg" -+#include "1066mhz_4x256mx16_dl.cfg" -+#include "clocks.cfg" -diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig ---- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,3 @@ -+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" -+CONFIG_ARM=y -+CONFIG_TARGET_UDOO=y -diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h ---- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 -+++ u-boot-2015.01/include/configs/udoo.h 2016-02-23 18:24:17.779054304 -0300 -@@ -78,7 +78,7 @@ - #define CONFIG_CMD_BMODE - #define CONFIG_CMD_SETEXPR +diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig +index a4a17c161..88a863337 100644 +--- a/configs/udoo_defconfig ++++ b/configs/udoo_defconfig +@@ -30,3 +30,4 @@ CONFIG_CMD_FS_GENERIC=y + CONFIG_DM=y + CONFIG_DM_THERMAL=y + CONFIG_OF_LIBFDT=y ++CONFIG_IDENT_STRING=" Parabola GNU/Linux-libre" +diff --git a/include/configs/udoo.h b/include/configs/udoo.h +index 0a7767c20..543993731 100644 +--- a/include/configs/udoo.h ++++ b/include/configs/udoo.h +@@ -51,6 +51,9 @@ --#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTDELAY 1 + /* Command definition */ + #define CONFIG_CMD_BMODE ++#define CONFIG_PARTITION_UUIDS ++#define CONFIG_CMD_PART ++#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) -@@ -96,60 +96,107 @@ - #define CONFIG_BOUNCE_BUFFER - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC - #define CONFIG_DOS_PARTITION +@@ -60,8 +63,13 @@ + + #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+ -+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) -+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb" -+#elif defined(CONFIG_MX6Q) - #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" -+#endif -+ +/* Enable Extlinux boot support */ +#define CONFIG_CMD_PXE +#define CONFIG_MENU +#define BOOT_TARGET_DEVICES(func) +#include - ++ #define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ -- "image=zImage\0" \ -- "console=ttymxc1\0" \ -+ BOOTENV \ -+ "bootfile=zImage\0" \ -+ "bootdir=/boot\0" \ -+ "console=ttymxc1,115200\0" \ + "image=zImage\0" \ + "console=ttymxc1\0" \ "splashpos=m,m\0" \ - "fdt_high=0xffffffff\0" \ -+ "rdaddr=0x12A00000\0" \ -+ "rdfile=initramfs-linux.img\0" \ +@@ -69,47 +77,54 @@ "initrd_high=0xffffffff\0" \ -- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ -- "fdt_addr=0x18000000\0" \ + "fdt_file=undefined\0" \ + "fdt_addr=0x18000000\0" \ - "boot_fdt=try\0" \ -+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ -+ "fdtdir=/boot/dtbs\0" \ -+ "fdtaddr=0x18000000\0" \ - "ip_dyn=yes\0" \ ++ "rdaddr=0x12A00000\0" \ ++ "rdfile=initramfs-linux.img\0" \ + "optargs=\0" \ + "video=\0" \ + "ip_dyn=yes\0" \ + "devtype=mmc\0" \ + "devnum=0\0" \ "mmcdev=0\0" \ -- "mmcpart=1\0" \ + "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ - "update_sd_firmware_filename=u-boot.imx\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ -+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${mmcroot} " \ -+ "video=${video}\0" \ -+ "videoargs=" \ -+ "setenv nextcon 0; " \ -+ "if hdmidet; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ -+ "if=RGB24; " \ -+ "setenv fbmem fbmem=28M; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ +- "else " \ - "setenv get_cmd tftp; " \ -+ "echo - no HDMI monitor;" \ - "fi; " \ +- "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ @@ -277,47 +65,37 @@ diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/conf - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ -- "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ -- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ -- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ -- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ +- "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ +- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "i2c dev 1; " \ -+ "if i2c probe 0x10; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ -+ "if=RGB666; " \ -+ "if test 0 -eq ${nextcon}; then " \ -+ "setenv fbmem fbmem=10M; " \ - "else " \ +- "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ -+ "setenv fbmem ${fbmem},10M; " \ - "fi; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ -- "bootz; " \ -+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ -+ "fi; " \ -+ "setenv bootargs ${bootargs} ${fbmem}\0" \ -+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ ++ "${optargs} " \ ++ "root=${root} " \ ++ "video=${video}\0" \ ++ "loadimage=echo Loading /boot/${image}..; load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \ ++ "loadfdt=echo Loading /boot/dtbs/${fdt_file}..; load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/dtbs/${fdt_file}\0" \ ++ "loadrd=load mmc ${bootpart} ${rdaddr} /boot/${rdfile}\0" \ + "mmcboot=mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "setenv bootpart ${mmcdev}:1; " \ ++ "part uuid mmc ${bootpart} uuid;" \ ++ "setenv root PARTUUID=${uuid} rw rootwait;" \ + "echo Checking for: ${bootdir}/uEnv.txt ...;" \ + "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \ + "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ @@ -328,15 +106,17 @@ diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/conf + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ -+ "fi; " \ + "fi; " \ +- "else " \ +- "bootz; " \ + "run scan_dev_for_boot;" \ + "if run loadimage; then " \ + "if run loadfdt; then " \ + "run mmcargs;" \ + "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ ++ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdt_addr};" \ + "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ ++ "bootz ${loadaddr} - ${fdt_addr};" \ + "fi;" \ + "else " \ + "echo Kernel found, but no device tree found;" \ @@ -347,24 +127,27 @@ diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/conf "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ -@@ -161,10 +208,10 @@ +@@ -135,26 +150,17 @@ "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ -- "${get_cmd} ${image}; " \ -+ "${get_cmd} ${bootfile}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ -@@ -177,16 +224,7 @@ - "fi;\0" + "bootz; " \ + "fi;\0" \ +- "findfdt=" \ +- "if test $board_rev = MX6Q ; then " \ +- "setenv fdt_file imx6q-udoo.dtb; fi; " \ +- "if test $board_rev = MX6DL ; then " \ +- "setenv fdt_file imx6dl-udoo.dtb; fi; " \ +- "if test $fdt_file = undefined; then " \ +- "echo WARNING: Could not determine dtb to use; fi; \0" ++ "findfdt=" \ ++ "if test $board_rev = MX6Q ; then " \ ++ "setenv fdt_file imx6q-udoo.dtb; fi; " \ ++ "if test $board_rev = MX6DL ; then " \ ++ "setenv fdt_file imx6dl-udoo.dtb; fi; " \ ++ "if test $fdt_file = undefined; then " \ ++ "echo WARNING: Could not determine dtb to use; fi; \0" #define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ @@ -375,15 +158,7 @@ diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/conf - "fi; " \ - "fi; " \ - "else run netboot; fi" -+ "run mmcboot;" - - /* Miscellaneous configurable options */ - #define CONFIG_SYS_LONGHELP -@@ -227,6 +265,7 @@ - - #define CONFIG_OF_LIBFDT - #define CONFIG_CMD_BOOTZ -+#define CONFIG_SUPPORT_RAW_INITRD ++ "run mmcboot; " - #ifndef CONFIG_SYS_DCACHE_OFF - #define CONFIG_CMD_CACHE + /* Print Buffer Size */ + #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -- cgit v1.2.3