From 8022c95aab7e1c70f82204bfa7adb8815d0489f0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 5 Jul 2013 20:24:31 -0300 Subject: syslinux: downgrading version for parabolaiso works properly --- libre-testing/syslinux/PKGBUILD | 63 +++ libre-testing/syslinux/splash.png | Bin 0 -> 11984 bytes .../syslinux-dont-build-dos-windows-targets.patch | 12 + libre-testing/syslinux/syslinux-install_update | 475 +++++++++++++++++++++ libre-testing/syslinux/syslinux.cfg | 74 ++++ libre-testing/syslinux/syslinux.install | 26 ++ 6 files changed, 650 insertions(+) create mode 100644 libre-testing/syslinux/PKGBUILD create mode 100644 libre-testing/syslinux/splash.png create mode 100644 libre-testing/syslinux/syslinux-dont-build-dos-windows-targets.patch create mode 100644 libre-testing/syslinux/syslinux-install_update create mode 100644 libre-testing/syslinux/syslinux.cfg create mode 100644 libre-testing/syslinux/syslinux.install (limited to 'libre-testing/syslinux') diff --git a/libre-testing/syslinux/PKGBUILD b/libre-testing/syslinux/PKGBUILD new file mode 100644 index 000000000..f9907d3f4 --- /dev/null +++ b/libre-testing/syslinux/PKGBUILD @@ -0,0 +1,63 @@ +# $Id: PKGBUILD 187808 2013-06-06 07:51:31Z tpowa $ +# Maintainer: Thomas Bächler +# Maintainer: Tobias Powalowski +# Maintainer (Parabola): André Silva + +pkgname=syslinux +pkgver=5.10 +pkgrel=3 +arch=('i686' 'x86_64') +pkgdesc="Collection of boot loaders that boot from FAT, ext2/3/4 and btrfs filesystems, from CDs and via PXE (Parabola rebranded)" +url="http://www.syslinux.org" +license=('GPL2') +depends=('perl' 'glibc') +optdepends=('perl-passwd-md5: For md5pass' + 'perl-digest-sha1: For sha1pass' + 'mtools: For mkdiskimage and syslinux support' + 'gptfdisk: For GPT support' + 'util-linux: For isohybrid') +makedepends=('nasm') +backup=('boot/syslinux/syslinux.cfg' + 'boot/syslinux/splash.png') +install=syslinux.install +source=(http://www.kernel.org/pub/linux/utils/boot/syslinux/$pkgname-${pkgver}.tar.bz2 + syslinux-dont-build-dos-windows-targets.patch + syslinux.cfg + syslinux-install_update + splash.png) +md5sums=('8f51d6a5d2730f534ba90e71f3347bff' + '25af85a05e7b212b7fb8b7587175e492' + 'e5a69630e3f7083aad2d14362b6117b3' + '4450792e13a0270c1b89bb6a66ce2fbc' + 'befd0e7c38a03442b791f2a530b4dd2d') + +build() { + # Do not try to build syslinux with our default LDFLAGS, it will fail + unset LDFLAGS + cd "$srcdir"/$pkgname-${pkgver} + # Do not try to build the Windows or DOS installers + patch -p1 -i "$srcdir"/syslinux-dont-build-dos-windows-targets.patch + # Fix FHS manpage path + sed 's|/usr/man|/usr/share/man|g' -i mk/syslinux.mk + make installer + make -C utils + make -C com32 +} + +package() { + cd "$srcdir"/$pkgname-${pkgver} + make INSTALLROOT="$pkgdir" AUXDIR=/usr/lib/syslinux install + + # install docs + cp -ar "$srcdir"/$pkgname-${pkgver}/doc "$pkgdir"/usr/share/ + # Install the default configuration + install -D -m644 "$srcdir"/syslinux.cfg "$pkgdir"/boot/syslinux/syslinux.cfg + # Install Parabola splash + install -D -m644 "$srcdir"/splash.png "$pkgdir"/boot/syslinux/splash.png + # Install the installation and update script + # This script is maintained at git://gist.github.com/772138.git + install -D -m755 "$srcdir"/syslinux-install_update "$pkgdir"/usr/bin/syslinux-install_update + # move extlinux binary to /usr/bin + mv "$pkgdir"/sbin/extlinux "$pkgdir"/usr/bin/extlinux + rmdir "$pkgdir"/sbin +} diff --git a/libre-testing/syslinux/splash.png b/libre-testing/syslinux/splash.png new file mode 100644 index 000000000..f94067681 Binary files /dev/null and b/libre-testing/syslinux/splash.png differ diff --git a/libre-testing/syslinux/syslinux-dont-build-dos-windows-targets.patch b/libre-testing/syslinux/syslinux-dont-build-dos-windows-targets.patch new file mode 100644 index 000000000..54151ab87 --- /dev/null +++ b/libre-testing/syslinux/syslinux-dont-build-dos-windows-targets.patch @@ -0,0 +1,12 @@ +diff -Nur syslinux-4.02.orig//Makefile syslinux-4.02//Makefile +--- syslinux-4.02.orig//Makefile 2010-07-21 21:33:13.000000000 +0200 ++++ syslinux-4.02//Makefile 2010-07-22 11:14:03.325522937 +0200 +@@ -54,7 +54,7 @@ + # files that depend only on the B phase, but may have to be regenerated + # for "make installer". + BSUBDIRS = codepage com32 lzo core memdisk mbr memdump gpxe sample \ +- diag libinstaller dos win32 win64 dosutil txt ++ libinstaller txt + ITARGET = + IOBJECTS = $(ITARGET) \ + utils/gethostip utils/isohybrid utils/mkdiskimage \ diff --git a/libre-testing/syslinux/syslinux-install_update b/libre-testing/syslinux/syslinux-install_update new file mode 100644 index 000000000..47d4d88be --- /dev/null +++ b/libre-testing/syslinux/syslinux-install_update @@ -0,0 +1,475 @@ +#!/bin/bash +# +# Sylinux Installer / Updater Scripts +# Copyright (C) 2011 Matthew Gyurgyik +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +#----------------- +# Exit Codes: +# 1 - get_boot_device or other function failed +# 2 - install/update failed +# 3 - set_active failed +# 4 - install_mbr failed +# +shopt -s nullglob + +libpath="/usr/lib/syslinux" +bootpath="/boot/syslinux" +extlinux="/usr/bin/extlinux" + +core_modules=(ldlinux.c32) +autoupdate_file=/boot/syslinux/SYSLINUX_AUTOUPDATE +pciids_file=/usr/share/hwdata/pci.ids + +## Helper functions ## +# Taken from libui-sh +# $1 needle +# $2 set (array) haystack +check_is_in() { + local needle="$1" element + shift + for element; do + [[ $element = $needle ]] && return 0 + done + return 1 +} + +# return true when blockdevice is an md raid, otherwise return a unset value +# get all devices that are part of raid device $1 +device_is_raid() { + [[ $1 && -f /proc/mdstat ]] || return 1 + local devmajor=$(stat -c %t "$1") + (( devmajor == 9 )) +} + +mdraid_all_slaves() { + local slave slaves + for slave in /sys/class/block/${1##*/}/slaves/*; do + source "$slave/uevent" + slaves="$slaves/dev/$DEVNAME " + unset DEVNAME + done + echo $slaves +} + +# Check /sys/block to see if device is partitioned +# If we have a partitioned block device (sda1) /sys/block/sda1/dev will not exist +# However, if we have an unpartitioned block device (sda) /sys/block/sda/dev will exist +dev_is_part() { + # $1 - blockdevice + local dev=$1 + + # If block device uevent file should be found + # If a partition is passed in path shouldn't exist + if [[ $dev = *cciss* ]]; then + [[ -f /sys/block/cciss\!${dev##*/}/dev ]] && return 1 + elif [[ $dev = *ida* ]]; then + [[ -f /sys/block/ida\!${dev##*/}/dev ]] && return 1 + else + [[ -f /sys/block/${dev##*/}/dev ]] && return 1 + fi + + return 0 +} + +# If EFI PART is present in the first 8 bytes then it must be a GPT disk +device_is_gpt() { + local partsig=$(dd if="$1" skip=64 bs=8 count=1 2>/dev/null) + [[ $partsig = "EFI PART" ]] +} + +clear_gpt_attr2() { + # $1 - Block Device, no partitions + local disk=$1 + + # Special Exception for cciss controllers + if [[ $disk = *cciss* ]]; then + for part in /dev/cciss/${disk##*/}*p*; do + local partnum="${part##*[[:alpha:]]}" + sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null + done + # Smart 2 Controllers + elif [[ $disk = *ida* ]]; then + for part in /dev/ida/${disk##*/}*p*; do + local partnum="${part##*[[:alpha:]]}" + sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null + done + else + for part in /sys/block/${disk##*/}/${disk##*/}*; do + local partnum="${part##*[[:alpha:]]}" + sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null + done + fi + return 0 +} + +usage() { +cat << EOF +usage: $0 options + +This script will install or upgrade Syslinux + +OPTIONS: + -h Show this message + -i Install Syslinux + -u Update Syslinux + -a Set Boot flag on boot partiton + -m Install Syslinux MBR + -s Updates Syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists + + Arguments Required: + -c Chroot install (ex: -c /mnt) + +Example Usage: syslinux-install_update.sh -i -a -m (install, set boot flag, install mbr) + syslinux-install_update.sh -u (update) +EOF +} + +# Trys to find the partition that /boot resides on +# This will either be on /boot or / (root) +getBoot() { + if [[ ! -d "$bootpath" ]]; then + echo "Could not find $bootpath" + echo "Is boot mounted? Is Syslinux installed?" + exit 1 + fi + + syslinux_fs=(ext2 ext3 ext4 btrfs vfat) + + # Use DATA from findmnt see rc.sysint for more info + if [[ -f /proc/self/mountinfo ]]; then + read rootdev rootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/") + read bootdev bootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/boot") + else + echo "Could not find /proc/self/mountinfo" + echo "Are you running a kernel greater than 2.6.24?" + exit 1 + fi + + if [[ $bootfs ]]; then + if ! check_is_in "$bootfs" "${syslinux_fs[@]}"; then + echo "/boot file system is not supported by Syslinux" + exit 1 + fi + boot="boot" + bootpart="$bootdev" + elif [[ $rootfs ]]; then + if ! check_is_in "$rootfs" "${syslinux_fs[@]}"; then + echo "/ (root) file system is not supported by Syslinux" + exit 1 + fi + boot="root" + bootpart="$rootdev" + else + echo "Could not find filesystem on / (root) or /boot." + exit 1 + fi +} + +# We store the partition table type either gpt or mbr in var ptb +# In rare cases a user could have one raid disk using mbr and another using gpt +# In such cases we accept that the output may be incomplete + +# Calls get_ptb() for $bootpart or for all device in RAID +declare -A bootdevs +get_boot_devices() { + if device_is_raid "$bootpart"; then + slaves=$(mdraid_all_slaves "$bootpart") + + for slave in ${slaves[@]}; do + local disk="${slave%%[[:digit:]]*}" + device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR" + bootdevs[$slave]="$ptb" + done + else + local disk="${bootpart%%[[:digit:]]*}" + device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR" + bootdevs[$bootpart]="$ptb" + fi +} + +# Function Assumes the boot partition should be marked as active +# All other partitions should not have the boot flag set +set_active() { + # If any bootdev is a block device without partitions bail + # we want to set the boot flag on partitioned disk + for dev in "${!bootdevs[@]}"; do + dev_is_part $dev || { echo "$dev - is a block device. Aborting set_active!"; return 1; } + done + + # Clear BIOS Bootable Legacy Attribute for GPT drives + # In rare cases where a RAID device has slaves on the same block device + # Attribute 2 will be cleared for each partition multiple times + for dev in "${!bootdevs[@]}"; do + local ptb="${bootdevs[$dev]}" + if [[ "$ptb" = GPT ]]; then + local disk="${dev%%[[:digit:]]*}" #ex: /dev/sda + clear_gpt_attr2 "$disk" + fi + done + + # Set the boot flag on bootdevs (generated from get_boot_devices) + for part in "${!bootdevs[@]}"; do + local ptb="${bootdevs[$part]}" + local partnum="${part##*[[:alpha:]]}" + case "$part" in + *[[:digit:]]p[[:digit:]]*) + local disk="${part%%p$partnum}" # get everything before p1 + ;; + *) + local disk="${part%%[[:digit:]]*}" + ;; + esac + + if [[ "$ptb" = MBR ]]; then + if sfdisk "$disk" -A "$partnum" &>/dev/null; then + echo "Boot Flag Set - $part" + else + echo "FAILED to Set the boot flag on $part" + exit 3 + fi + elif [[ "$ptb" = GPT ]]; then + if sgdisk "$disk" --attributes="$partnum":set:2 &>/dev/null; then + echo "Attribute Legacy Bios Bootable Set - $part" + else + echo "FAILED to set attribute Legacy BIOS Bootable on $part" + exit 3 + fi + fi + done + return 0 +} + +install_mbr() { + # If any bootdev is a block device without partitions bail + # we want to install the mbr to a partitioned disk + for dev in "${!bootdevs[@]}"; do + dev_is_part "$dev" || { echo "$dev - is a block device. Aborting MBR install"; return 1; } + done + + for part in "${!bootdevs[@]}"; do + local partnum="${part##*[[:alpha:]]}" + case "$part" in + *[[:digit:]]p[[:digit:]]*) + local disk="${part%%p$partnum}" # get everything before p1 + ;; + *) + local disk="${part%%[[:digit:]]*}" + ;; + esac + local ptb="${bootdevs[$part]}" + + # We want to install to the root of the block device + # If the device is a partition - ABORT! + dev_is_part "$disk" && \ + { echo "ABORT! MBR installation to partition ($disk)!"; exit 4;} + + if [[ "$ptb" = MBR ]]; then + mbrfile="$libpath/mbr.bin" + elif [[ "$ptb" = GPT ]]; then + mbrfile="$libpath/gptmbr.bin" + fi + + if dd bs=440 count=1 conv=notrunc if="$mbrfile" of="$disk" &> /dev/null; then + echo "Installed MBR ($mbrfile) to $disk" + else + echo "Error Installing MBR ($mbrfile) to $disk" + exit 4 + fi + done + return 0 +} + +_install() { + # Copy all com32 files to /boot + for file in "${libpath}"/*.c32; do + file=${file##*/} + # Symlink files if /boot resides on the same partition as root + if [[ "$boot" = root ]]; then + ln -s "${libpath#$CHROOT}/$file" "$bootpath/$file" &> /dev/null + elif [[ "$boot" = boot ]]; then + cp "$libpath/$file" "$bootpath/$file" + fi + done + + # Copy / Symlink pci.ids if pci.ids exists on the FS + if [[ -f $pciids_file ]]; then + if [[ "$boot" = root ]]; then + ln -s "$pciids_file" "$bootpath/pci.ids" &> /dev/null + elif [[ "$boot" = boot ]]; then + cp "$pciids_file" "$bootpath/pci.ids" &> /dev/null + fi + fi + + if device_is_raid "$bootpart"; then + echo "Detected RAID on /boot - installing Syslinux with --raid" + "$extlinux" --install "$bootpath" -r > /dev/null 2>&1 + else + "$extlinux" --install "$bootpath" > /dev/null 2>&1 + fi + + if (( $? )); then + echo "Syslinux install failed" + exit 2 + else + echo "Syslinux install successful" + fi + + touch "$CHROOT/$autoupdate_file" +} + +update() { + # Update c32 files in /boot, if /boot is not on same fs + if [[ "$boot" = boot ]]; then + for file in "$bootpath"/*.c32; do + file=${file##*/} + cp "$libpath/$file" "$bootpath/$file" &> /dev/null + done + if [[ -f "$bootpath/pci.ids" ]]; then + cp "$pciids_file" "$bootpath/pci.ids" &> /dev/null + fi + fi + + # Ensure core modules exist and if not install them + for file in "${core_modules[@]}"; do + if [[ ! -f $bootpath/$file ]]; then + if [[ "$boot" = root ]]; then + ln -s "${libpath#$CHROOT}/$file" "$bootpath/$file" &> /dev/null + elif [[ "$boot" = boot ]]; then + cp "$libpath/$file" "$bootpath/$file" + fi + fi + done + + if device_is_raid $bootpart; then + echo "Detected RAID on /boot - installing Syslinux with --raid" + "$extlinux" --update "$bootpath" -r &> /dev/null + else + "$extlinux" --update "$bootpath" &> /dev/null + fi + + if (($?)); then + echo "Syslinux update failed" + exit 2 + else + echo "Syslinux update successful" + fi +} + +if (( $# == 0 )); then + usage + exit 1 +fi + +while getopts "c:uihmas" opt; do + case $opt in + c) + CHROOT=$(readlink -e "$OPTARG") + if [[ -z $CHROOT ]]; then + echo "error: chroot path ``$OPTARG does not exist"; + exit 1 + fi + ;; + h) + USAGE="True" + ;; + i) + INSTALL="True" + ;; + u) + UPDATE="True" + ;; + m) + MBR="True" + ;; + a) + SET_ACTIVE="True" + ;; + s) + # If AUTOUPDATE_FILE does not exist exit the script + if [[ -f $autoupdate_file ]]; then + UPDATE="True" + else + exit 0 + fi + ;; + *) + usage + exit 1 + ;; + esac +done + +if [[ $USAGE ]]; then + usage + exit 0 +fi + +# Make sure only root can run our script +if (( $(id -u) != 0 )); then + echo "This script must be run as root" 1>&2 + exit 1 +fi + +# Display Usage Information if both Install and Update are passed +if [[ $INSTALL && $UPDATE ]]; then + usage + exit 1 +fi + +# If a chroot dir is path set variables to reflect chroot +if [[ "$CHROOT" ]]; then + libpath="$CHROOT$libpath" + bootpath="$CHROOT$bootpath" + extlinux="$CHROOT$extlinux" +fi + +# Exit if no /boot path exists +if ( f=("$bootpath"/*); (( ! ${#f[@]} )) ); then + echo "Error: $bootpath is empty!" + echo "Is /boot mounted?" + exit 1 +fi + +# Get the boot device if any of these options are passed +if [[ $INSTALL || $UPDATE || $SET_ACTIVE || $MBR ]]; then + getBoot +fi + +# Install or Update +if [[ $INSTALL ]]; then + _install || exit +elif [[ $UPDATE ]]; then + update || exit +fi + + +# SET_ACTIVE and MBR +if [[ $SET_ACTIVE ]] || [[ $MBR ]]; then + get_boot_devices + + if [[ $SET_ACTIVE ]]; then + set_active || exit + fi + + if [[ $MBR ]]; then + install_mbr || exit + fi +fi + +exit 0 + +# vim: set et sw=4: diff --git a/libre-testing/syslinux/syslinux.cfg b/libre-testing/syslinux/syslinux.cfg new file mode 100644 index 000000000..e4f8d8e28 --- /dev/null +++ b/libre-testing/syslinux/syslinux.cfg @@ -0,0 +1,74 @@ +# Config file for Syslinux - +# /boot/syslinux/syslinux.cfg +# +# Comboot modules: +# * menu.c32 - provides a text menu +# * vesamenu.c32 - provides a graphical menu +# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders +# * hdt.c32 - hardware detection tool +# * reboot.c32 - reboots the system +# +# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux. +# If /usr and /boot are on the same file system, symlink the files instead +# of copying them. +# +# If you do not use a menu, a 'boot:' prompt will be shown and the system +# will boot automatically after 5 seconds. +# +# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux +# The wiki provides further configuration examples + +DEFAULT parabola +PROMPT 0 # Set to 1 if you always want to display the boot: prompt +TIMEOUT 50 +# You can create syslinux keymaps with the keytab-lilo tool +#KBDMAP de.ktl + +# Menu Configuration +# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux +#UI menu.c32 +UI vesamenu.c32 + +# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu +MENU TITLE Parabola GNU/Linux-libre +MENU BACKGROUND splash.png +MENU COLOR border 30;44 #40ffffff #a0000000 std +MENU COLOR title 1;36;44 #9033ccff #a0000000 std +MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all +MENU COLOR unsel 37;44 #50ffffff #a0000000 std +MENU COLOR help 37;40 #c0ffffff #a0000000 std +MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std +MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std +MENU COLOR msg07 37;40 #90ffffff #a0000000 std +MENU COLOR tabmsg 31;40 #30ffffff #00000000 std + +# boot sections follow +# +# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line. +# +#-* + +LABEL parabola + MENU LABEL Parabola GNU/Linux-libre + LINUX ../vmlinuz-linux-libre + APPEND root=/dev/sda3 ro + INITRD ../initramfs-linux-libre.img + +LABEL parabolafallback + MENU LABEL Parabola GNU/Linux-libre Fallback + LINUX ../vmlinuz-linux-libre + APPEND root=/dev/sda3 ro + INITRD ../initramfs-linux-libre-fallback.img + +# If you want Memtest on syslinux, use this LABEL section to launch it (install the memtest86+ package) +# LABEL memtest +# MENU LABEL Memtest86+ +# LINUX ../memtest86+/memtest.bin + +LABEL hdt + MENU LABEL HDT (Hardware Detection Tool) + COM32 hdt.c32 + +LABEL reboot + MENU LABEL Reboot + COM32 reboot.c32 diff --git a/libre-testing/syslinux/syslinux.install b/libre-testing/syslinux/syslinux.install new file mode 100644 index 000000000..19caa1026 --- /dev/null +++ b/libre-testing/syslinux/syslinux.install @@ -0,0 +1,26 @@ +post_install() { + echo "==> If you want to use syslinux as your bootloader" + echo "==> edit /boot/syslinux/syslinux.cfg and run" + echo "==> # /usr/bin/syslinux-install_update -i -a -m" + echo "==> to install it." +} + +post_upgrade() { + # auto-update syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists + /usr/bin/syslinux-install_update -s + # update to 5.01 message + if [ "$(vercmp $2 5.01)" -lt 0 ]; then + echo "If you used syslinux-install_update to install syslinux:" + echo "==> If you want to use syslinux with menu and all modules please rerun" + echo "==> # /usr/bin/syslinux-install_update -i -a -m" + echo "" + echo "If you manually installed syslinux:" + echo "==> Please copy or symlink all .c32 modules to your /boot/syslinux directory." + echo "==> If (/ and /boot on seperate fs):" + echo "==> # cp /usr/lib/syslinux/*.c32 /boot/syslinux" + echo "==> If (/ and /boot on same fs):" + echo "==> # ln -s /usr/lib/syslinux/*.c32 /boot/syslinux" + fi +} + +# vim:set ts=2 sw=2 et: -- cgit v1.2.3