From e9d3becf4bc982a613f25e0ede0dc4a4c7864c07 Mon Sep 17 00:00:00 2001 From: Denis 'GNUtoo' Carikli Date: Sun, 24 May 2020 04:19:21 +0200 Subject: kernels: remove linux-libre-x86_64 This kernel has been replaced by linux-libre-64 in libre in an attempt to unify all 64bit kernels made for 32bit rootfs. This has been tested on a Lenovo Thinkpad X200 running a fully free version of Coreboot 4.9 (no microcode or other nonfree binaries). The only regresion that I noticed is that beside having the following line in /etc/mkinitcpio.conf: MODULES=(i915 netconsole) The i915 driver seem to be loaded late in the boot process as I can only see notice a resolution change about when the rootfs is mounted and that init is started. Signed-off-by: Denis 'GNUtoo' Carikli --- .../0009-USB-Armory-MkII-support.patch | 555 --------------------- 1 file changed, 555 deletions(-) delete mode 100644 kernels/linux-libre-x86_64/0009-USB-Armory-MkII-support.patch (limited to 'kernels/linux-libre-x86_64/0009-USB-Armory-MkII-support.patch') diff --git a/kernels/linux-libre-x86_64/0009-USB-Armory-MkII-support.patch b/kernels/linux-libre-x86_64/0009-USB-Armory-MkII-support.patch deleted file mode 100644 index 4c8f8fed3..000000000 --- a/kernels/linux-libre-x86_64/0009-USB-Armory-MkII-support.patch +++ /dev/null @@ -1,555 +0,0 @@ -From 55e7015aa06dd943b55a0101beddae1c811a2be5 Mon Sep 17 00:00:00 2001 -From: Kevin Mihelich -Date: Sun, 11 Aug 2019 12:34:17 -0600 -Subject: [PATCH 9/9] USB Armory MkII support - ---- - arch/arm/boot/dts/Makefile | 2 + - arch/arm/boot/dts/imx6ul-usbarmory.dts | 255 +++++++++++++++++++++++ - arch/arm/boot/dts/imx6ull-usbarmory.dts | 256 ++++++++++++++++++++++++ - 3 files changed, 513 insertions(+) - create mode 100644 arch/arm/boot/dts/imx6ul-usbarmory.dts - create mode 100644 arch/arm/boot/dts/imx6ull-usbarmory.dts - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index a0f92b9dbd7d..5d6e9f76f6db 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -580,9 +580,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ - imx6ul-tx6ul-0010.dtb \ - imx6ul-tx6ul-0011.dtb \ - imx6ul-tx6ul-mainboard.dtb \ -+ imx6ul-usbarmory.dtb \ - imx6ull-14x14-evk.dtb \ - imx6ull-colibri-eval-v3.dtb \ - imx6ull-colibri-wifi-eval-v3.dtb \ -+ imx6ull-usbarmory.dtb \ - imx6ull-phytec-segin-ff-rdk-nand.dtb \ - imx6ull-phytec-segin-ff-rdk-emmc.dtb \ - imx6ull-phytec-segin-lc-rdk-nand.dtb \ -diff --git a/arch/arm/boot/dts/imx6ul-usbarmory.dts b/arch/arm/boot/dts/imx6ul-usbarmory.dts -new file mode 100644 -index 000000000000..3936ef8a64f1 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6ul-usbarmory.dts -@@ -0,0 +1,255 @@ -+/* -+ * USB armory Mk II device tree file -+ * https://inversepath.com/usbarmory -+ * -+ * Copyright (C) 2019, F-Secure Corporation -+ * Andrej Rosano -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "imx6ul.dtsi" -+ -+/ { -+ model = "F-Secure USB armory Mk II"; -+ compatible = "inversepath,imx6ul-usbarmory-mkII", "fsl,imx6ul"; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ memory { -+ reg = <0x80000000 0x20000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_led>; -+ -+ led-white { -+ label = "LED_WHITE"; -+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led-blue { -+ label = "LED_BLUE"; -+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ reg_sd1_vmmc: sd1_regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "VSD_3V3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ }; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_bluetooth>; -+ uart-has-rtscts; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&usdhc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc1>; -+ no-1-8-v; -+ keep-power-in-suspend; -+ wakeup-source; -+ status = "okay"; -+}; -+ -+&usdhc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc2>; -+ non-removable; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+}; -+ -+&iomuxc { -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 -+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_bluetooth: uart1grp { -+ fsl,pins = < -+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b0 /* BT_UART_TX */ -+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b0 /* BT_UART_RX */ -+ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b0 /* BT_UART_CTS */ -+ MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x130b0 /* BT_UART_RTS */ -+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x1f020 /* BT_UART_DSR */ -+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10020 /* BT_UART_DTR */ -+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1f020 /* BT_SWDCLK */ -+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1f020 /* BT_SWDIO */ -+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x1f020 /* BT_RESET */ -+ MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x1f020 /* BT_SWITCH_1 */ -+ MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1f020 /* BT_SWITCH_2 */ -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 -+ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 -+ >; -+ }; -+ -+ pinctrl_led: ledgrp { -+ fsl,pins = < -+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x1f020 -+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x1f020 -+ >; -+ }; -+ -+ pinctrl_usdhc1: usdhc1grp { -+ fsl,pins = < -+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f019 -+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x1f019 -+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x1f019 -+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x1f019 -+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x1f019 -+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x1f019 -+ >; -+ }; -+ -+ pinctrl_usdhc2: usdhc2grp { -+ fsl,pins = < -+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10071 -+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 -+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 -+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 -+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 -+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 -+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 -+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 -+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 -+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 -+ >; -+ }; -+}; -+ -+&aips2 { -+ crypto: caam@2140000 { -+ compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0x2140000 0x3c000>; -+ ranges = <0 0x2140000 0x3c000>; -+ interrupts = ; -+ clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>, -+ <&clks IMX6UL_CLK_CAAM_MEM>; -+ clock-names = "ipg", "aclk", "mem"; -+ -+ sec_jr0: jr0@1000 { -+ compatible = "fsl,sec-v4.0-job-ring"; -+ reg = <0x1000 0x1000>; -+ interrupts = ; -+ }; -+ -+ sec_jr1: jr1@2000 { -+ compatible = "fsl,sec-v4.0-job-ring"; -+ reg = <0x2000 0x1000>; -+ interrupts = ; -+ }; -+ sec_jr2: jr2@3000 { -+ compatible = "fsl,sec-v4.0-job-ring"; -+ reg = <0x3000 0x1000>; -+ interrupts = ; -+ }; -+ }; -+}; -+ -+/ { -+ soc { -+ caam_sm: caam-sm@00100000 { -+ compatible = "fsl,imx7d-caam-sm", "fsl,imx6q-caam-sm"; -+ reg = <0x00100000 0x3fff>; -+ }; -+ -+ irq_sec_vio: caam_secvio { -+ compatible = "fsl,imx7d-caam-secvio", "fsl,imx6q-caam-secvio"; -+ interrupts = ; -+ }; -+ }; -+ -+ caam_keyblob: caam-keyblob { -+ compatible = "fsl,sec-v4.0-keyblob"; -+ status = "okay"; -+ }; -+}; -+ -+&usbotg1 { -+ dr_mode = "otg"; -+ disable-over-current; -+ tpl-support; -+ status = "okay"; -+}; -+ -+&usbotg2 { -+ dr_mode = "host"; -+ disable-over-current; -+ tpl-support; -+ status = "okay"; -+}; -diff --git a/arch/arm/boot/dts/imx6ull-usbarmory.dts b/arch/arm/boot/dts/imx6ull-usbarmory.dts -new file mode 100644 -index 000000000000..85cf30bff527 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6ull-usbarmory.dts -@@ -0,0 +1,256 @@ -+/* -+ * USB armory Mk II device tree file -+ * https://inversepath.com/usbarmory -+ * -+ * Copyright (C) 2019, F-Secure Corporation -+ * Andrej Rosano -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "imx6ul.dtsi" -+ -+/ { -+ model = "F-Secure USB armory Mk II"; -+ compatible = "inversepath,imx6ull-usbarmory-mkII", "fsl,imx6ull"; -+ -+ chosen { -+ stdout-path = &uart2; -+ }; -+ -+ memory { -+ reg = <0x80000000 0x20000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_led>; -+ -+ led-white { -+ label = "LED_WHITE"; -+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led-blue { -+ label = "LED_BLUE"; -+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ reg_sd1_vmmc: sd1_regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "VSD_3V3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ }; -+}; -+ -+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ -+/delete-node/ &crypto; -+ -+&cpu0 { -+ operating-points = < -+ /* kHz uV */ -+ 900000 1275000 -+ 792000 1225000 -+ 528000 1175000 -+ 396000 1025000 -+ 198000 950000 -+ >; -+ fsl,soc-operating-points = < -+ /* KHz uV */ -+ 900000 1250000 -+ 792000 1175000 -+ 528000 1175000 -+ 396000 1175000 -+ 198000 1175000 -+ >; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_bluetooth>; -+ uart-has-rtscts; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "okay"; -+}; -+ -+&usdhc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc1>; -+ no-1-8-v; -+ keep-power-in-suspend; -+ wakeup-source; -+ status = "okay"; -+}; -+ -+&usdhc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc2>; -+ non-removable; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ pinctrl-0 = <&pinctrl_i2c1>; -+ status = "okay"; -+}; -+ -+&iomuxc { -+ pinctrl_uart2: uart2grp { -+ fsl,pins = < -+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 -+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_bluetooth: uart1grp { -+ fsl,pins = < -+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b0 /* BT_UART_TX */ -+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b0 /* BT_UART_RX */ -+ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b0 /* BT_UART_CTS */ -+ MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x130b0 /* BT_UART_RTS */ -+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x1f020 /* BT_UART_DSR */ -+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10020 /* BT_UART_DTR */ -+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1f020 /* BT_SWDCLK */ -+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1f020 /* BT_SWDIO */ -+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x1f020 /* BT_RESET */ -+ MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x1f020 /* BT_SWITCH_1 */ -+ MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x1f020 /* BT_SWITCH_2 */ -+ >; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = < -+ MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0 -+ MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0 -+ >; -+ }; -+ -+ pinctrl_led: ledgrp { -+ fsl,pins = < -+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x1f020 -+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x1f020 -+ >; -+ }; -+ -+ pinctrl_usdhc1: usdhc1grp { -+ fsl,pins = < -+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f019 -+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x1f019 -+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x1f019 -+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x1f019 -+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x1f019 -+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x1f019 -+ >; -+ }; -+ -+ pinctrl_usdhc2: usdhc2grp { -+ fsl,pins = < -+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10071 -+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 -+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 -+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 -+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 -+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 -+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 -+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 -+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 -+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 -+ >; -+ }; -+}; -+ -+/ { -+ soc { -+ aips3: aips-bus@02200000 { -+ compatible = "fsl,aips-bus", "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0x02200000 0x100000>; -+ ranges; -+ -+ dcp: dcp@02280000 { -+ compatible = "fsl,imx6ull-dcp", "fsl,imx6sl-dcp", "fsl,imx28-dcp"; -+ reg = <0x02280000 0x4000>; -+ interrupts = , -+ , -+ ; -+ clocks = <&clks IMX6ULL_CLK_DCP_CLK>; -+ clock-names = "dcp"; -+ }; -+ -+ rngb: rngb@02284000 { -+ compatible = "fsl,imx6sl-rng", "fsl,imx25-rngb", "fsl,imx-rng", "imx-rng"; -+ reg = <0x02284000 0x4000>; -+ interrupts = ; -+ clocks = <&clks IMX6UL_CLK_DUMMY>; -+ }; -+ }; -+ }; -+}; -+ -+&usbotg1 { -+ dr_mode = "peripheral"; -+ disable-over-current; -+ tpl-support; -+ status = "okay"; -+}; -+ -+&usbotg2 { -+ dr_mode = "host"; -+ disable-over-current; -+ tpl-support; -+ status = "okay"; -+}; --- -2.23.0 - -- cgit v1.2.3