From c1879f6ed8abf3ae9acdcf48b45d6ddafffd4674 Mon Sep 17 00:00:00 2001 From: "coadde [Márcio Alexandre Silva Delgado]" Date: Fri, 22 Aug 2014 20:40:37 -0300 Subject: linux-libre*: Adjust version numbers following discussion --- kernels/linux-libre-lts-knock/PKGBUILD | 86 +++++++++++---------- kernels/linux-libre-lts-knock/config.i686 | 2 +- kernels/linux-libre-lts-knock/config.mips64el | 2 +- kernels/linux-libre-lts-knock/config.x86_64 | 2 +- .../linux-libre-lts-knock.install | 35 --------- kernels/linux-libre-lts-knock/linux.install | 35 +++++++++ kernels/linux-libre-lts-knock/linux.preset | 14 ++++ kernels/linux-libre-pae/PKGBUILD | 71 +++++++++-------- kernels/linux-libre-pae/config | 2 +- kernels/linux-libre-pae/linux-libre-pae.install | 37 --------- kernels/linux-libre-pae/linux.install | 37 +++++++++ kernels/linux-libre-pae/linux.preset | 14 ++++ kernels/linux-libre-rt/PKGBUILD | 88 ++++++++++++---------- kernels/linux-libre-rt/config.i686 | 2 +- kernels/linux-libre-rt/config.mips64el | 2 +- kernels/linux-libre-rt/config.x86_64 | 2 +- kernels/linux-libre-rt/linux-libre-rt.install | 41 ---------- kernels/linux-libre-rt/linux.install | 41 ++++++++++ kernels/linux-libre-rt/linux.preset | 14 ++++ kernels/linux-libre-xen/PKGBUILD | 79 ++++++++++--------- kernels/linux-libre-xen/config | 2 +- kernels/linux-libre-xen/linux-libre-xen.install | 37 --------- kernels/linux-libre-xen/linux.install | 37 +++++++++ kernels/linux-libre-xen/linux.preset | 14 ++++ libre/linux-libre-grsec/config.i686 | 2 +- libre/linux-libre-grsec/config.mips64el | 2 +- libre/linux-libre-grsec/config.x86_64 | 2 +- libre/linux-libre-lts/config.i686 | 2 +- libre/linux-libre-lts/config.mips64el | 2 +- libre/linux-libre-lts/config.x86_64 | 2 +- libre/linux-libre/PKGBUILD | 1 - 31 files changed, 392 insertions(+), 317 deletions(-) delete mode 100644 kernels/linux-libre-lts-knock/linux-libre-lts-knock.install create mode 100644 kernels/linux-libre-lts-knock/linux.install create mode 100644 kernels/linux-libre-lts-knock/linux.preset delete mode 100644 kernels/linux-libre-pae/linux-libre-pae.install create mode 100644 kernels/linux-libre-pae/linux.install create mode 100644 kernels/linux-libre-pae/linux.preset delete mode 100644 kernels/linux-libre-rt/linux-libre-rt.install create mode 100644 kernels/linux-libre-rt/linux.install create mode 100644 kernels/linux-libre-rt/linux.preset delete mode 100644 kernels/linux-libre-xen/linux-libre-xen.install create mode 100644 kernels/linux-libre-xen/linux.install create mode 100644 kernels/linux-libre-xen/linux.preset diff --git a/kernels/linux-libre-lts-knock/PKGBUILD b/kernels/linux-libre-lts-knock/PKGBUILD index b0a2669c2..4868b72b0 100644 --- a/kernels/linux-libre-lts-knock/PKGBUILD +++ b/kernels/linux-libre-lts-knock/PKGBUILD @@ -1,3 +1,4 @@ +# $Id$ # Contributor (Arch): Tobias Powalowski # Contributor (Arch): Thomas Baechler # Maintainer: André Silva @@ -7,38 +8,41 @@ # Contributor: Márcio Silva # Contributor: Luke Shumaker -pkgbase=linux-libre-lts-knock # Build stock -libre-lts-knock kernel -#pkgbase=linux-libre-custom # Build kernel with a different name -_basekernel=3.10 -_sublevel=53 -_knockpatchver=${_basekernel} -pkgver=${_basekernel}.${_sublevel} +pkgbase=linux-libre-lts-knock # Build stock -lts-knock kernel +_pkgbasever=3.10-gnu +_pkgver=3.10.53-gnu +_lxopkgver=3.10.53-gnu # nearly always the same as _pkgver +_knockpatchver=3.10 + +_replaces=('kernel26%' 'kernel26-libre%' 'linux%' 'linux-libre%-kmod-alx') # '%' gets replaced with _kernelname + +_srcname=linux-${_pkgbasever%-*} +pkgver=${_pkgver//-/.} pkgrel=1 -_lxopkgver=${_basekernel}.52 # nearly always the same as pkgver arch=('i686' 'x86_64' 'mips64el') url="https://gnunet.org/knock" license=('GPL2') makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc') options=('!strip') -source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gnu/linux-libre-${_basekernel}-gnu.tar.xz" - "http://linux-libre.fsfla.org/pub/linux-libre/releases/${pkgver}-gnu/patch-${_basekernel}-gnu-${pkgver}-gnu.xz" +source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/linux-libre-${_pkgbasever}.tar.xz" + "http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_pkgbasever}-${_pkgver}.xz" "http://gnunet.org/sites/default/files/tcp_stealth_${_knockpatchver}.diff" # the main kernel config files 'config.i686' 'config.x86_64' # standard config files for mkinitcpio ramdisk - "${pkgbase}.preset" + 'linux.preset' 'Kbuild' 'Kbuild.platforms' 'logo_linux_'{clut224.ppm,vga16.ppm,mono.pbm} 'change-default-console-loglevel.patch' 'criu-no-expert.patch' - "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.xz") + "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}_0loongsonlibre_mipsel.tar.xz") md5sums=('d562fd52580a3b6b18b6eeb5921d1d5c' '4840f0db6af66cbce923b1043971c256' '26380d6f05471ef8e065a77d87588009' '25ad0606de251a5734f4535c61452a56' '158cb922d9b43028f6c45c696e773915' - '02023949955a138c44bb0c46227a6d18' + 'eb14dcfd80c00852ef81ded6e826826a' '2967cecc3af9f954ccc822fd63dca6ff' '8267264d9a8966e57fdacd1fa1fc65c4' '071d4939e9ef4256e4c027ef3c864903' @@ -54,13 +58,14 @@ if [ "$CARCH" != "mips64el" ]; then fi _kernelname=${pkgbase#linux-libre} -_localversionname=-libre-lts-knock +_replaces=("${_replaces[@]/\%/${_kernelname}}") prepare() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" - if [ "${_basekernel}" != "${pkgver}" ]; then - patch -Np1 -i "${srcdir}/patch-${_basekernel}-gnu-${pkgver}-gnu" + # add upstream patch + if [ "${_pkgbasever}" != "${_pkgver}" ]; then + patch -p1 -i "${srcdir}/patch-${_pkgbasever}-${_pkgver}" fi # add knock patch @@ -105,19 +110,19 @@ prepare() { fi if [ "${_kernelname}" != "" ]; then - sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" ./.config + sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config fi - # set extraversion to pkgrel - sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile + # append pkgrel to extraversion + sed -ri "s|^(EXTRAVERSION =.*\S).*|\1-${pkgrel}|" Makefile # don't run depmod on 'make install'. We'll do this ourselves in packaging sed -i '2iexit 0' scripts/depmod.sh } build() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" # get kernel version make prepare @@ -160,15 +165,15 @@ build() { } _package() { - pkgdesc="The ${pkgbase^} kernel and modules - stable longtime supported kernel package suitable for servers with support for stealth TCP sockets" + pkgdesc="The ${pkgbase/linux/Linux} kernel and modules" [ "${pkgbase}" = "linux-libre" ] && groups=('base') - depends=('coreutils' 'linux-libre-firmware' 'kmod') + depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7') optdepends=('crda: to set the correct wireless channels of your country') - provides=("kernel26${_kernelname}=${pkgver}" "linux${_kernelname}=${pkgver}" "linux${_kernelname/-lts/}") - conflicts=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}" "linux${_kernelname/-lts/}" "linux-libre${_kernelname/-lts/}") - replaces=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}" "linux${_kernelname/-lts/}" "linux-libre${_kernelname/-lts/}") + provides=( "${_replaces[@]/%/=${pkgver}}") + conflicts=("${_replaces[@]}") + replaces=( "${_replaces[@]}") backup=("etc/mkinitcpio.d/${pkgbase}.preset") - install=${pkgbase}.install + install=linux.install if [ "$CARCH" = "mips64el" ]; then optdepends+=('mkinitcpio: to make the initramfs (needs reinstall of this package)') conflicts+=('mkinitcpio<0.7') @@ -176,8 +181,7 @@ _package() { depends+=('mkinitcpio>=0.7') fi - cd "${srcdir}/linux-${_basekernel}" - + cd "${srcdir}/${_srcname} KARCH=x86 [ $CARCH = "mips64el" ] && KARCH=mips @@ -208,9 +212,9 @@ _package() { -i "${startdir}/${install}" # install mkinitcpio preset file for kernel - install -D -m644 "${srcdir}/${pkgbase}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" + install -D -m644 "${srcdir}/linux.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" sed \ - -e "1s|'linux*.*'|'${pkgbase}'|" \ + -e "1s|'linux.*'|'${pkgbase}'|" \ -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \ -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \ -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \ @@ -229,10 +233,10 @@ _package() { # gzip -9 all modules to save 100MB of space find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \; # make room for external modules - ln -s "../extramodules-${_basekernel}${_localversionname:--libre-lts-knock}" "${pkgdir}/lib/modules/${_kernver}/extramodules" + ln -s "../extramodules-${_basekernel}${_kernelname}" "${pkgdir}/lib/modules/${_kernver}/extramodules" # add real version for building modules and running depmod from post_install/upgrade - mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-lts-knock}" - echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-lts-knock}/version" + mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}" + echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}/version" # Now we call depmod... depmod -b "$pkgdir" -F System.map "$_kernver" @@ -243,9 +247,9 @@ _package() { _package-headers() { pkgdesc="Header files and scripts for building modules for ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-headers=${pkgver}" "linux${_kernelname}-headers=${pkgver}" "linux${_kernelname/-lts/}-headers") - conflicts=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers" "linux${_kernelname/-lts/}-headers" "linux-libre${_kernelname/-lts/}-headers") - replaces=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers" "linux${_kernelname/-lts/}-headers" "linux-libre${_kernelname/-lts/}-headers") + provides=( "${_replaces[@]/%/-headers=${pkgver}}") + conflicts=("${_replaces[@]/%/-headers}") + replaces=( "${_replaces[@]/%/-headers}") KARCH=x86 [ $CARCH = "mips64el" ] && KARCH=mips @@ -261,7 +265,7 @@ _package-headers() { cd "${pkgdir}/usr/lib/modules/${_kernver}" ln -sf ../../../src/linux-${_kernver} build - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" install -D -m644 Makefile \ "${pkgdir}/usr/src/linux-${_kernver}/Makefile" install -D -m644 kernel/Makefile \ @@ -403,11 +407,11 @@ _package-headers() { _package-docs() { pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-docs=${pkgver}" "linux${_kernelname}-docs=${pkgver}" "linux${_kernelname/-lts/}-docs") - conflicts=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs" "linux${_kernelname/-lts/}-docs" "linux-libre${_kernelname/-lts/}-docs") - replaces=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs" "linux${_kernelname/-lts/}-docs" "linux-libre${_kernelname/-lts/}-docs") + provides=( "${_replaces[@]/%/-docs=${pkgver}}") + conflicts=("${_replaces[@]/%/-docs}") + replaces=( "${_replaces[@]/%/-docs}") - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" mkdir -p "${pkgdir}/usr/src/linux-${_kernver}" cp -al Documentation "${pkgdir}/usr/src/linux-${_kernver}" diff --git a/kernels/linux-libre-lts-knock/config.i686 b/kernels/linux-libre-lts-knock/config.i686 index 017b2fdce..e2be53402 100644 --- a/kernels/linux-libre-lts-knock/config.i686 +++ b/kernels/linux-libre-lts-knock/config.i686 @@ -47,7 +47,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" -CONFIG_LOCALVERSION="-libre-lts-knock" +CONFIG_LOCALVERSION="-lts-knock" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-lts-knock/config.mips64el b/kernels/linux-libre-lts-knock/config.mips64el index 69f2bc4c9..e78421bbf 100644 --- a/kernels/linux-libre-lts-knock/config.mips64el +++ b/kernels/linux-libre-lts-knock/config.mips64el @@ -172,7 +172,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-lts-knock" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-lts-knock/config.x86_64 b/kernels/linux-libre-lts-knock/config.x86_64 index 93698f08a..3122801e1 100644 --- a/kernels/linux-libre-lts-knock/config.x86_64 +++ b/kernels/linux-libre-lts-knock/config.x86_64 @@ -48,7 +48,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" -CONFIG_LOCALVERSION="-libre-lts-knock" +CONFIG_LOCALVERSION="-lts-knock" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-lts-knock/linux-libre-lts-knock.install b/kernels/linux-libre-lts-knock/linux-libre-lts-knock.install deleted file mode 100644 index c0b92638e..000000000 --- a/kernels/linux-libre-lts-knock/linux-libre-lts-knock.install +++ /dev/null @@ -1,35 +0,0 @@ -# arg 1: the new package version -# arg 2: the old package version - -KERNEL_NAME=-lts-knock -KERNEL_VERSION= - -post_install () { - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - if command -v mkinitcpio 2>&1 > /dev/null; then - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} - fi -} - -post_upgrade() { - if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then - echo "WARNING: /boot appears to be a separate partition but is not mounted." - fi - - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - if command -v mkinitcpio 2>&1 > /dev/null; then - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} - fi -} - -post_remove() { - # also remove the compat symlinks - rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img - rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img -} diff --git a/kernels/linux-libre-lts-knock/linux.install b/kernels/linux-libre-lts-knock/linux.install new file mode 100644 index 000000000..8d5658aab --- /dev/null +++ b/kernels/linux-libre-lts-knock/linux.install @@ -0,0 +1,35 @@ +# arg 1: the new package version +# arg 2: the old package version + +KERNEL_NAME= +KERNEL_VERSION= + +post_install () { + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + if command -v mkinitcpio 2>&1 > /dev/null; then + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} + fi +} + +post_upgrade() { + if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then + echo "WARNING: /boot appears to be a separate partition but is not mounted." + fi + + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + if command -v mkinitcpio 2>&1 > /dev/null; then + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} + fi +} + +post_remove() { + # also remove the compat symlinks + rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img + rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img +} diff --git a/kernels/linux-libre-lts-knock/linux.preset b/kernels/linux-libre-lts-knock/linux.preset new file mode 100644 index 000000000..b06292d10 --- /dev/null +++ b/kernels/linux-libre-lts-knock/linux.preset @@ -0,0 +1,14 @@ +# mkinitcpio preset file for the 'linux' package + +ALL_config="/etc/mkinitcpio.conf" +ALL_kver="/boot/vmlinuz-linux" + +PRESETS=('default' 'fallback') + +#default_config="/etc/mkinitcpio.conf" +default_image="/boot/initramfs-linux.img" +#default_options="" + +#fallback_config="/etc/mkinitcpio.conf" +fallback_image="/boot/initramfs-linux-fallback.img" +fallback_options="-S autodetect" diff --git a/kernels/linux-libre-pae/PKGBUILD b/kernels/linux-libre-pae/PKGBUILD index 5f72c2465..e742971db 100644 --- a/kernels/linux-libre-pae/PKGBUILD +++ b/kernels/linux-libre-pae/PKGBUILD @@ -1,4 +1,4 @@ -# $Id: PKGBUILD 219731 2014-08-14 06:02:01Z tpowa $ +# $Id$ # Contributor (Arch): Tobias Powalowski # Contributor (Arch): Thomas Baechler # Maintainer: André Silva @@ -8,29 +8,33 @@ # Contributor: Márcio Silva # Contributor: Luke Shumaker -pkgbase=linux-libre-pae # Build stock -libre-pae kernel -#pkgbase=linux-libre-custom # Build kernel with a different name -_basekernel=3.16 -pkgver=${_basekernel}.1 +pkgbase=linux-libre-pae # Build stock -pae kernel +_pkgbasever=3.16-gnu +_pkgver=3.16.1-gnu + +_replaces=('kernel26%' 'kernel26-libre%' 'linux%' 'linux-libre%-kmod-alx') # '%' gets replaced with _kernelname + +_srcname=linux-${_pkgbasever%-*} +pkgver=${_pkgver//-/.} pkgrel=1 arch=('i686') url="http://linux-libre.fsfla.org/" license=('GPL2') makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc') options=('!strip') -source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gnu/linux-libre-${_basekernel}-gnu.tar.xz" - "http://linux-libre.fsfla.org/pub/linux-libre/releases/${pkgver}-gnu/patch-${_basekernel}-gnu-${pkgver}-gnu.xz" +source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasekernel}/linux-libre-${_pkgbasekernel}.tar.xz" + "http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_pkgbasekernel}-${_pkgver}.xz" # the main kernel config files 'config' # standard config files for mkinitcpio ramdisk - "${pkgbase}.preset" + 'linux.preset' 'logo_linux_'{clut224.ppm,vga16.ppm,mono.pbm} 'change-default-console-loglevel.patch' 'compal-laptop-hwmon-fix.patch') sha256sums=('9c2a524c901febe0f0138f702bfdeb52d6f79f22c1fdbabaa37580bc70f16218' '3bbc78694d76b12b6229799d7c4daf5215b9dd731908d96b03603aceb54ad5c7' 'd7f16bb97225fc315cbe0bdf5fbc30ee8e387298bd53ba7cc623044b2f48c506' - '292d5c553f87246c8dc2d57cadfd2db92a3750173b4588d53c2919743171eca5' + 'f0d90e756f14533ee67afda280500511a62465b4f76adcc5effa95a40045179c' '074b67818582874146c389c029bc43648d145891a27e47aa2c5c42d3571f0264' '2e87a8ec1cc0c91938cac24992d8a3d4362b3e9d939767e4c9d2ec8e6d969d53' 'f67f60a30bcf2e9a2ba88ad97cace308da7a7f94919bb95c3dc030f5885a8015' @@ -38,13 +42,14 @@ sha256sums=('9c2a524c901febe0f0138f702bfdeb52d6f79f22c1fdbabaa37580bc70f16218' 'f36f61a0a72bcb0a9c04264343503bfbf927c9ea0db819e66734a3933b060588') _kernelname=${pkgbase#linux-libre} -_localversionname=-libre-pae +_replaces=("${_replaces[@]/\%/${_kernelname}}") prepare() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" - if [ "${_basekernel}" != "${pkgver}" ]; then - patch -p1 -i "${srcdir}/patch-${_basekernel}-gnu-${pkgver}-gnu" + # add upstream patch + if [ "${_pkgbasever}" != "${_pkgver}" ]; then + patch -p1 -i "${srcdir}/patch-${_pkgbasever}-${_pkgver}" fi # add freedo as boot logo @@ -65,12 +70,12 @@ prepare() { cat "${srcdir}/config" > ./.config # simpler if [ "${_kernelname}" != "" ]; then - sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" ./.config + sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config fi - # set extraversion to pkgrel - sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile + # append pkgrel to extraversion + sed -ri "s|^(EXTRAVERSION =.*\S).*|\1-${pkgrel}|" Makefile # don't run depmod on 'make install'. We'll do this ourselves in packaging sed -i '2iexit 0' scripts/depmod.sh @@ -91,23 +96,23 @@ prepare() { } build() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" make ${MAKEFLAGS} LOCALVERSION= bzImage modules } _package() { - pkgdesc="The ${pkgbase^} kernel and modules with PAE support (HIGHMEM64G)" + pkgdesc="The ${pkgbase/linux/Linux} kernel and modules" [ "${pkgbase}" = "linux-libre" ] && groups=('base') - depends=('coreutils' 'linux-libre-firmware' 'kmod' 'mkinitcpio>=0.7') + depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7') optdepends=('crda: to set the correct wireless channels of your country') - provides=("kernel26${_kernelname}=${pkgver}" "linux${_kernelname}=${pkgver}") - conflicts=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}") - replaces=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}") + provides=( "${_replaces[@]/%/=${pkgver}}") + conflicts=("${_replaces[@]}") + replaces=( "${_replaces[@]}") backup=("etc/mkinitcpio.d/${pkgbase}.preset") - install=${pkgbase}.install + install=linux.install - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" KARCH=x86 @@ -129,9 +134,9 @@ _package() { -i "${startdir}/${install}" # install mkinitcpio preset file for kernel - install -D -m644 "${srcdir}/${pkgbase}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" + install -D -m644 "${srcdir}/linux.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" sed \ - -e "1s|'linux*.*'|'${pkgbase}'|" \ + -e "1s|'linux.*'|'${pkgbase}'|" \ -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \ -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \ -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \ @@ -144,10 +149,10 @@ _package() { # gzip -9 all modules to save 100MB of space find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \; # make room for external modules - ln -s "../extramodules-${_basekernel}${_localversionname:--libre-pae}" "${pkgdir}/lib/modules/${_kernver}/extramodules" + ln -s "../extramodules-${_basekernel}${_kernelname}" "${pkgdir}/lib/modules/${_kernver}/extramodules" # add real version for building modules and running depmod from post_install/upgrade - mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-pae}" - echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-pae}/version" + mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}" + echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}/version" # Now we call depmod... depmod -b "${pkgdir}" -F System.map "${_kernver}" @@ -162,13 +167,13 @@ _package() { _package-headers() { pkgdesc="Header files and scripts for building modules for ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-headers=${pkgver}" "linux${_kernelname}-headers=${pkgver}") - conflicts=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers") - replaces=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers") + provides=( "${_replaces[@]/%/-headers=${pkgver}}") + conflicts=("${_replaces[@]/%/-headers}") + replaces=( "${_replaces[@]/%/-headers}") install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}" - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" install -D -m644 Makefile \ "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile" install -D -m644 kernel/Makefile \ diff --git a/kernels/linux-libre-pae/config b/kernels/linux-libre-pae/config index aaa9529c4..1b7cb928d 100644 --- a/kernels/linux-libre-pae/config +++ b/kernels/linux-libre-pae/config @@ -49,7 +49,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-pae" +CONFIG_LOCALVERSION="-pae" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-pae/linux-libre-pae.install b/kernels/linux-libre-pae/linux-libre-pae.install deleted file mode 100644 index 36d1edc78..000000000 --- a/kernels/linux-libre-pae/linux-libre-pae.install +++ /dev/null @@ -1,37 +0,0 @@ -# arg 1: the new package version -# arg 2: the old package version - -KERNEL_NAME=-pae -KERNEL_VERSION= - -post_install () { - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} -} - -post_upgrade() { - if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then - echo "WARNING: /boot appears to be a separate partition but is not mounted." - fi - - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} - - if [ $(vercmp $2 3.13) -lt 0 ]; then - echo ">>> WARNING: AT keyboard support is no longer built into the kernel." - echo ">>> In order to use your keyboard during early init, you MUST" - echo ">>> include the 'keyboard' hook in your mkinitcpio.conf." - fi -} - -post_remove() { - # also remove the compat symlinks - rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img - rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img -} diff --git a/kernels/linux-libre-pae/linux.install b/kernels/linux-libre-pae/linux.install new file mode 100644 index 000000000..32514d892 --- /dev/null +++ b/kernels/linux-libre-pae/linux.install @@ -0,0 +1,37 @@ +# arg 1: the new package version +# arg 2: the old package version + +KERNEL_NAME= +KERNEL_VERSION= + +post_install () { + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} +} + +post_upgrade() { + if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then + echo "WARNING: /boot appears to be a separate partition but is not mounted." + fi + + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} + + if [ $(vercmp $2 3.13) -lt 0 ]; then + echo ">>> WARNING: AT keyboard support is no longer built into the kernel." + echo ">>> In order to use your keyboard during early init, you MUST" + echo ">>> include the 'keyboard' hook in your mkinitcpio.conf." + fi +} + +post_remove() { + # also remove the compat symlinks + rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img + rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img +} diff --git a/kernels/linux-libre-pae/linux.preset b/kernels/linux-libre-pae/linux.preset new file mode 100644 index 000000000..b06292d10 --- /dev/null +++ b/kernels/linux-libre-pae/linux.preset @@ -0,0 +1,14 @@ +# mkinitcpio preset file for the 'linux' package + +ALL_config="/etc/mkinitcpio.conf" +ALL_kver="/boot/vmlinuz-linux" + +PRESETS=('default' 'fallback') + +#default_config="/etc/mkinitcpio.conf" +default_image="/boot/initramfs-linux.img" +#default_options="" + +#fallback_config="/etc/mkinitcpio.conf" +fallback_image="/boot/initramfs-linux-fallback.img" +fallback_options="-S autodetect" diff --git a/kernels/linux-libre-rt/PKGBUILD b/kernels/linux-libre-rt/PKGBUILD index ed2a930b5..3148d0048 100644 --- a/kernels/linux-libre-rt/PKGBUILD +++ b/kernels/linux-libre-rt/PKGBUILD @@ -1,3 +1,4 @@ +# $Id$ # Maintainer (Arch): Joakim Hernberg # Contributor (Arch): Ray Rashif # Contributor (Arch): timbosa @@ -10,27 +11,31 @@ # Contributor: Márcio Silva # Contributor: Luke Shumaker -pkgbase=linux-libre-rt # Build stock -libre-rt kernel -#pkgbase=linux-libre-custom # Build kernel with a different name -_basekernel=3.14 -_releasever=12 +pkgbase=linux-libre-rt # Build stock -rt kernel +_pkgbasever=3.14-gnu +_pkgver=3.14.12-gnu +_lxopkgver=3.14.14-gnu # nearly always the same as _pkgver +_rtbasever=3.14 +_rtver=3.14.12 _rtpatchver=rt9 -_pkgver=${_basekernel}.${_releasever} -pkgver=${_basekernel}.${_releasever}_${_rtpatchver} + +_replaces=('kernel26%' 'kernel26-libre%' 'linux%' 'linux-libre%-kmod-alx') # '%' gets replaced with _kernelname + +_srcname=linux-${_pkgbasever%-*} +pkgver=${_pkgver//-/.}_${_rtpatchver} pkgrel=1 -_lxopkgver=${_basekernel}.10 # nearly always the same as pkgver arch=('i686' 'x86_64' 'mips64el') url="https://rt.wiki.kernel.org/" license=('GPL2') makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc') options=('!strip') -source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gnu/linux-libre-${_basekernel}-gnu.tar.xz" - "http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}-gnu/patch-${_basekernel}-gnu-${_pkgver}-gnu.xz" - "http://www.kernel.org/pub/linux/kernel/projects/rt/${_basekernel}/patch-${_pkgver}-${_rtpatchver}.patch.xz" +source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasekernel}/linux-libre-${_pkgbasekernel}.tar.xz" + "http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_pkgbasekernel}-${_pkgver}.xz" + "http://www.kernel.org/pub/linux/kernel/projects/rt/${_rtbasever}/patch-${_rtver}-${_rtpatchver}.patch.xz" # the main kernel config files 'config.i686' 'config.x86_64' # standard config files for mkinitcpio ramdisk - "${pkgbase}.preset" + 'linux.preset' 'Kbuild' 'Kbuild.platforms' 'logo_linux_'{clut224.ppm,vga16.ppm,mono.pbm} @@ -40,13 +45,13 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gn '0003-module-remove-MODULE_GENERIC_TABLE.patch' '0006-genksyms-fix-typeof-handling.patch' 'revert_timers-dont_raise_softirq_unconditionally_and_fixes.patch' - "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.xz") + "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}_0loongsonlibre_mipsel.tar.xz") sha256sums=('477555c709b9407fe37dbd70d3331ff9dde1f9d874aba2741f138d07ae6f281b' 'bdb59c597c883cc0f78cebccca5652e79b63f30e1d497e0560737ba66a48ae27' 'aedc16bf897b0a1b0789158afad9ffed92be30eaedf8fe2f27cad659673dc93e' '84a7e8d8ffb308f74e3e0bdfec81ac918ae90a6cad579ed5452481b5f5ceb003' '23e14dbfc4f4f2991ed532ce07a856fa168ff74404d0c4e7f736147c8ebf41a3' - 'afb12acaae2b2fc03d0d1367066657aacd60eb242162d90eef7b3f5fbe40f554' + 'f0d90e756f14533ee67afda280500511a62465b4f76adcc5effa95a40045179c' 'c5451d5e1eafc4f8d28b1a2958ec3102c124433a414a86450fc32058e004156b' '55bf07738a3286168a7929ae16dbca29defd14e77b9d24c487ae4c3d12bb9eb9' '074b67818582874146c389c029bc43648d145891a27e47aa2c5c42d3571f0264' @@ -66,13 +71,14 @@ if [ "$CARCH" != "mips64el" ]; then fi _kernelname=${pkgbase#linux-libre} -_localversionname=-libre-rt +_replaces=("${_replaces[@]/\%/${_kernelname}}") prepare() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" - if [ "${_basekernel}" != "${_pkgver}" ]; then - patch -p1 -i "${srcdir}/patch-${_basekernel}-gnu-${_pkgver}-gnu" + # add upstream patch + if [ "${_pkgbasever}" != "${_pkgver}" ]; then + patch -p1 -i "${srcdir}/patch-${_pkgbasever}-${_pkgver}" fi # add realtime patch @@ -127,12 +133,12 @@ prepare() { fi if [ "${_kernelname}" != "" ]; then - sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" ./.config + sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config fi - # set extraversion to pkgrel - sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile + # append pkgrel to extraversion + sed -ri "s|^(EXTRAVERSION =.*\S).*|\1-${pkgrel}|" Makefile # don't run depmod on 'make install'. We'll do this ourselves in packaging sed -i '2iexit 0' scripts/depmod.sh @@ -153,7 +159,7 @@ prepare() { } build() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" if [ "$CARCH" == "mips64el" ]; then # The build system passes it directly to linker, disable to avoid @@ -168,15 +174,15 @@ build() { } _package() { - pkgdesc="The ${pkgbase^} kernel and modules with realtime preemption" + pkgdesc="The ${pkgbase/linux/Linux} kernel and modules [ "${pkgbase}" = "linux-libre" ] && groups=('base') - depends=('coreutils' 'linux-libre-firmware' 'kmod') + depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7') optdepends=('crda: to set the correct wireless channels of your country') - provides=("kernel26${_kernelname}=${pkgver}" "linux${_kernelname}=${pkgver}") - conflicts=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}") - replaces=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}") + provides=( "${_replaces[@]/%/=${pkgver}}") + conflicts=("${_replaces[@]}") + replaces=( "${_replaces[@]}") backup=("etc/mkinitcpio.d/${pkgbase}.preset") - install=${pkgbase}.install + install=linux.install if [ "$CARCH" = "mips64el" ]; then optdepends+=('mkinitcpio: to make the initramfs (needs reinstall of this package)') conflicts+=('mkinitcpio<0.7') @@ -184,7 +190,7 @@ _package() { depends+=('mkinitcpio>=0.7') fi - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" KARCH=x86 [ $CARCH = "mips64el" ] && KARCH=mips @@ -213,9 +219,9 @@ _package() { -i "${startdir}/${install}" # install mkinitcpio preset file for kernel - install -D -m644 "${srcdir}/${pkgbase}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" + install -D -m644 "${srcdir}/linux.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" sed \ - -e "1s|'linux*.*'|'${pkgbase}'|" \ + -e "1s|'linux.*'|'${pkgbase}'|" \ -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \ -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \ -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \ @@ -234,10 +240,10 @@ _package() { # gzip -9 all modules to save 100MB of space find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \; # make room for external modules - ln -s "../extramodules-${_basekernel}${_localversionname:--libre-rt}" "${pkgdir}/lib/modules/${_kernver}/extramodules" + ln -s "../extramodules-${_basekernel}${_kernelname}" "${pkgdir}/lib/modules/${_kernver}/extramodules" # add real version for building modules and running depmod from post_install/upgrade - mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-rt}" - echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-rt}/version" + mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}" + echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}/version" # Now we call depmod... depmod -b "${pkgdir}" -F System.map "${_kernver}" @@ -252,9 +258,9 @@ _package() { _package-headers() { pkgdesc="Header files and scripts for building modules for ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-headers=${pkgver}" "linux${_kernelname}-headers=${pkgver}") - conflicts=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers") - replaces=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers") + provides=( "${_replaces[@]/%/-headers=${pkgver}}") + conflicts=("${_replaces[@]/%/-headers}") + replaces=( "${_replaces[@]/%/-headers}") KARCH=x86 [ $CARCH = "mips64el" ] && KARCH=mips @@ -267,7 +273,7 @@ _package-headers() { install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}" - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" install -D -m644 Makefile \ "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile" install -D -m644 kernel/Makefile \ @@ -391,11 +397,11 @@ _package-headers() { _package-docs() { pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-docs=${pkgver}" "linux${_kernelname}-docs=${pkgver}") - conflicts=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs") - replaces=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs") + provides=( "${_replaces[@]/%/-docs=${pkgver}}") + conflicts=("${_replaces[@]/%/-docs}") + replaces=( "${_replaces[@]/%/-docs}") - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build" cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build" diff --git a/kernels/linux-libre-rt/config.i686 b/kernels/linux-libre-rt/config.i686 index f34946047..b41244be5 100644 --- a/kernels/linux-libre-rt/config.i686 +++ b/kernels/linux-libre-rt/config.i686 @@ -50,7 +50,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-rt" +CONFIG_LOCALVERSION="-rt" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-rt/config.mips64el b/kernels/linux-libre-rt/config.mips64el index f9dd3966c..a29818f56 100644 --- a/kernels/linux-libre-rt/config.mips64el +++ b/kernels/linux-libre-rt/config.mips64el @@ -175,7 +175,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-rt" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-rt/config.x86_64 b/kernels/linux-libre-rt/config.x86_64 index f332f7cbb..eaf8ad676 100644 --- a/kernels/linux-libre-rt/config.x86_64 +++ b/kernels/linux-libre-rt/config.x86_64 @@ -51,7 +51,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-rt" +CONFIG_LOCALVERSION="-rt" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-rt/linux-libre-rt.install b/kernels/linux-libre-rt/linux-libre-rt.install deleted file mode 100644 index 766e0d7fc..000000000 --- a/kernels/linux-libre-rt/linux-libre-rt.install +++ /dev/null @@ -1,41 +0,0 @@ -# arg 1: the new package version -# arg 2: the old package version - -KERNEL_NAME=-rt -KERNEL_VERSION= - -post_install () { - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - if command -v mkinitcpio 2>&1 > /dev/null; then - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} - fi -} - -post_upgrade() { - if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then - echo "WARNING: /boot appears to be a separate partition but is not mounted." - fi - - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - if command -v mkinitcpio 2>&1 > /dev/null; then - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} - fi - - if [ $(vercmp $2 3.13) -lt 0 ]; then - echo ">>> WARNING: AT keyboard support is no longer built into the kernel." - echo ">>> In order to use your keyboard during early init, you MUST" - echo ">>> include the 'keyboard' hook in your mkinitcpio.conf." - fi -} - -post_remove() { - # also remove the compat symlinks - rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img - rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img -} diff --git a/kernels/linux-libre-rt/linux.install b/kernels/linux-libre-rt/linux.install new file mode 100644 index 000000000..34be5215e --- /dev/null +++ b/kernels/linux-libre-rt/linux.install @@ -0,0 +1,41 @@ +# arg 1: the new package version +# arg 2: the old package version + +KERNEL_NAME= +KERNEL_VERSION= + +post_install () { + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + if command -v mkinitcpio 2>&1 > /dev/null; then + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} + fi +} + +post_upgrade() { + if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then + echo "WARNING: /boot appears to be a separate partition but is not mounted." + fi + + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + if command -v mkinitcpio 2>&1 > /dev/null; then + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} + fi + + if [ $(vercmp $2 3.13) -lt 0 ]; then + echo ">>> WARNING: AT keyboard support is no longer built into the kernel." + echo ">>> In order to use your keyboard during early init, you MUST" + echo ">>> include the 'keyboard' hook in your mkinitcpio.conf." + fi +} + +post_remove() { + # also remove the compat symlinks + rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img + rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img +} diff --git a/kernels/linux-libre-rt/linux.preset b/kernels/linux-libre-rt/linux.preset new file mode 100644 index 000000000..b06292d10 --- /dev/null +++ b/kernels/linux-libre-rt/linux.preset @@ -0,0 +1,14 @@ +# mkinitcpio preset file for the 'linux' package + +ALL_config="/etc/mkinitcpio.conf" +ALL_kver="/boot/vmlinuz-linux" + +PRESETS=('default' 'fallback') + +#default_config="/etc/mkinitcpio.conf" +default_image="/boot/initramfs-linux.img" +#default_options="" + +#fallback_config="/etc/mkinitcpio.conf" +fallback_image="/boot/initramfs-linux-fallback.img" +fallback_options="-S autodetect" diff --git a/kernels/linux-libre-xen/PKGBUILD b/kernels/linux-libre-xen/PKGBUILD index e4b0e6716..710e431cd 100644 --- a/kernels/linux-libre-xen/PKGBUILD +++ b/kernels/linux-libre-xen/PKGBUILD @@ -1,4 +1,4 @@ -# $Id: PKGBUILD 219731 2014-08-14 06:02:01Z tpowa $ +# $Id$ # Contributor (Arch): Tobias Powalowski # Contributor (Arch): Thomas Baechler # Maintainer: André Silva @@ -8,29 +8,33 @@ # Contributor: Márcio Silva # Contributor: Luke Shumaker -pkgbase=linux-libre-xen # Build stock -libre-xen kernel -#pkgbase=linux-libre-custom # Build kernel with a different name -_basekernel=3.16 -pkgver=${_basekernel}.1 +pkgbase=linux-libre-xen # Build stock -xen kernel +_pkgbasever=3.16-gnu +_pkgver=3.16.1-gnu + +_replaces=('kernel26%' 'kernel26-libre%' 'linux%' 'linux-libre%-kmod-alx') # '%' gets replaced with _kernelname + +_srcname=linux-${_pkgbasever%-*} +pkgver=${_pkgver//-/.} pkgrel=1 arch=('i686') url="http://linux-libre.fsfla.org/" license=('GPL2') makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc') options=('!strip') -source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gnu/linux-libre-${_basekernel}-gnu.tar.xz" - "http://linux-libre.fsfla.org/pub/linux-libre/releases/${pkgver}-gnu/patch-${_basekernel}-gnu-${pkgver}-gnu.xz" +source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasekernel}/linux-libre-${_pkgbasekernel}.tar.xz" + "http://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgver}/patch-${_basekernel}-${_pkgver}.xz" # the main kernel config files 'config' # standard config files for mkinitcpio ramdisk - "${pkgbase}.preset" + 'linux.preset' 'logo_linux_'{clut224.ppm,vga16.ppm,mono.pbm} 'change-default-console-loglevel.patch' 'compal-laptop-hwmon-fix.patch') sha256sums=('9c2a524c901febe0f0138f702bfdeb52d6f79f22c1fdbabaa37580bc70f16218' '3bbc78694d76b12b6229799d7c4daf5215b9dd731908d96b03603aceb54ad5c7' '285ba206830c2ab24336133de87351d4ecf5483563d4bb2493eb7ea0cb74e43d' - '7a475ada892857397cf80d2de777825ae94758dc2d9dfa3754ae3d670f4a2f02' + 'f0d90e756f14533ee67afda280500511a62465b4f76adcc5effa95a40045179c' '074b67818582874146c389c029bc43648d145891a27e47aa2c5c42d3571f0264' '2e87a8ec1cc0c91938cac24992d8a3d4362b3e9d939767e4c9d2ec8e6d969d53' 'f67f60a30bcf2e9a2ba88ad97cace308da7a7f94919bb95c3dc030f5885a8015' @@ -38,13 +42,14 @@ sha256sums=('9c2a524c901febe0f0138f702bfdeb52d6f79f22c1fdbabaa37580bc70f16218' 'f36f61a0a72bcb0a9c04264343503bfbf927c9ea0db819e66734a3933b060588') _kernelname=${pkgbase#linux-libre} -_localversionname=-libre-xen +_replaces=("${_replaces[@]/\%/${_kernelname}}") prepare() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" - if [ "${_basekernel}" != "${pkgver}" ]; then - patch -p1 -i "${srcdir}/patch-${_basekernel}-gnu-${pkgver}-gnu" + # add upstream patch + if [ "${_pkgbasever}" != "${_pkgver}" ]; then + patch -p1 -i "${srcdir}/patch-${_pkgbasever}-${_pkgver}" fi # add freedo as boot logo @@ -65,12 +70,12 @@ prepare() { cat "${srcdir}/config" > ./.config # simpler if [ "${_kernelname}" != "" ]; then - sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" ./.config + sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config fi - # set extraversion to pkgrel - sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile + # append pkgrel to extraversion + sed -ri "s|^(EXTRAVERSION =.*\S).*|\1-${pkgrel}|" Makefile # don't run depmod on 'make install'. We'll do this ourselves in packaging sed -i '2iexit 0' scripts/depmod.sh @@ -91,23 +96,23 @@ prepare() { } build() { - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" make ${MAKEFLAGS} LOCALVERSION= bzImage modules } _package() { - pkgdesc="The ${pkgbase^} kernel and modules with Xen guest support" + pkgdesc="The ${pkgbase/linux/Linux} kernel and modules" [ "${pkgbase}" = "linux-libre" ] && groups=('base') - depends=('coreutils' 'linux-libre-firmware' 'kmod' 'mkinitcpio>=0.7') + depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7') optdepends=('crda: to set the correct wireless channels of your country') - provides=("kernel26${_kernelname}=${pkgver}" "linux${_kernelname}=${pkgver}") - conflicts=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}") - replaces=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}") + provides=( "${_replaces[@]/%/=${pkgver}}") + conflicts=("${_replaces[@]}") + replaces=( "${_replaces[@]}") backup=("etc/mkinitcpio.d/${pkgbase}.preset") - install=${pkgbase}.install + install=linux.install - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" KARCH=x86 @@ -129,9 +134,9 @@ _package() { -i "${startdir}/${install}" # install mkinitcpio preset file for kernel - install -D -m644 "${srcdir}/${pkgbase}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" + install -D -m644 "${srcdir}/linux.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset" sed \ - -e "1s|'linux*.*'|'${pkgbase}'|" \ + -e "1s|'linux.*'|'${pkgbase}'|" \ -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \ -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \ -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \ @@ -144,10 +149,10 @@ _package() { # gzip -9 all modules to save 100MB of space find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \; # make room for external modules - ln -s "../extramodules-${_basekernel}${_localversionname:--libre-xen}" "${pkgdir}/lib/modules/${_kernver}/extramodules" + ln -s "../extramodules-${_basekernel}${_kernelname}" "${pkgdir}/lib/modules/${_kernver}/extramodules" # add real version for building modules and running depmod from post_install/upgrade - mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-xen}" - echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--libre-xen}/version" + mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}" + echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname}/version" # Now we call depmod... depmod -b "${pkgdir}" -F System.map "${_kernver}" @@ -162,13 +167,13 @@ _package() { _package-headers() { pkgdesc="Header files and scripts for building modules for ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-headers=${pkgver}" "linux${_kernelname}-headers=${pkgver}") - conflicts=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers") - replaces=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers") + provides=( "${_replaces[@]/%/-headers=${pkgver}}") + conflicts=("${_replaces[@]/%/-headers}") + replaces=( "${_replaces[@]/%/-headers}") install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}" - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" install -D -m644 Makefile \ "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile" install -D -m644 kernel/Makefile \ @@ -281,11 +286,11 @@ _package-headers() { _package-docs() { pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase^} kernel" - provides=("kernel26${_kernelname}-docs=${pkgver}" "linux${_kernelname}-docs=${pkgver}") - conflicts=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs") - replaces=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs") + provides=( "${_replaces[@]/%/-docs=${pkgver}}") + conflicts=("${_replaces[@]/%/-docs}") + replaces=( "${_replaces[@]/%/-docs}") - cd "${srcdir}/linux-${_basekernel}" + cd "${srcdir}/${_srcname}" mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build" cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build" diff --git a/kernels/linux-libre-xen/config b/kernels/linux-libre-xen/config index 5f73893f3..de57c71a1 100644 --- a/kernels/linux-libre-xen/config +++ b/kernels/linux-libre-xen/config @@ -49,7 +49,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-xen" +CONFIG_LOCALVERSION="-xen" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/kernels/linux-libre-xen/linux-libre-xen.install b/kernels/linux-libre-xen/linux-libre-xen.install deleted file mode 100644 index 388c1172e..000000000 --- a/kernels/linux-libre-xen/linux-libre-xen.install +++ /dev/null @@ -1,37 +0,0 @@ -# arg 1: the new package version -# arg 2: the old package version - -KERNEL_NAME=-xen -KERNEL_VERSION= - -post_install () { - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} -} - -post_upgrade() { - if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then - echo "WARNING: /boot appears to be a separate partition but is not mounted." - fi - - # updating module dependencies - echo ">>> Updating module dependencies. Please wait ..." - depmod ${KERNEL_VERSION} - echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." - mkinitcpio -p linux-libre${KERNEL_NAME} - - if [ $(vercmp $2 3.13) -lt 0 ]; then - echo ">>> WARNING: AT keyboard support is no longer built into the kernel." - echo ">>> In order to use your keyboard during early init, you MUST" - echo ">>> include the 'keyboard' hook in your mkinitcpio.conf." - fi -} - -post_remove() { - # also remove the compat symlinks - rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img - rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img -} diff --git a/kernels/linux-libre-xen/linux.install b/kernels/linux-libre-xen/linux.install new file mode 100644 index 000000000..32514d892 --- /dev/null +++ b/kernels/linux-libre-xen/linux.install @@ -0,0 +1,37 @@ +# arg 1: the new package version +# arg 2: the old package version + +KERNEL_NAME= +KERNEL_VERSION= + +post_install () { + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} +} + +post_upgrade() { + if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then + echo "WARNING: /boot appears to be a separate partition but is not mounted." + fi + + # updating module dependencies + echo ">>> Updating module dependencies. Please wait ..." + depmod ${KERNEL_VERSION} + echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..." + mkinitcpio -p linux-libre${KERNEL_NAME} + + if [ $(vercmp $2 3.13) -lt 0 ]; then + echo ">>> WARNING: AT keyboard support is no longer built into the kernel." + echo ">>> In order to use your keyboard during early init, you MUST" + echo ">>> include the 'keyboard' hook in your mkinitcpio.conf." + fi +} + +post_remove() { + # also remove the compat symlinks + rm -f boot/initramfs-linux-libre${KERNEL_NAME}.img + rm -f boot/initramfs-linux-libre${KERNEL_NAME}-fallback.img +} diff --git a/kernels/linux-libre-xen/linux.preset b/kernels/linux-libre-xen/linux.preset new file mode 100644 index 000000000..b06292d10 --- /dev/null +++ b/kernels/linux-libre-xen/linux.preset @@ -0,0 +1,14 @@ +# mkinitcpio preset file for the 'linux' package + +ALL_config="/etc/mkinitcpio.conf" +ALL_kver="/boot/vmlinuz-linux" + +PRESETS=('default' 'fallback') + +#default_config="/etc/mkinitcpio.conf" +default_image="/boot/initramfs-linux.img" +#default_options="" + +#fallback_config="/etc/mkinitcpio.conf" +fallback_image="/boot/initramfs-linux-fallback.img" +fallback_options="-S autodetect" diff --git a/libre/linux-libre-grsec/config.i686 b/libre/linux-libre-grsec/config.i686 index 7d18bc40a..5e28406ee 100644 --- a/libre/linux-libre-grsec/config.i686 +++ b/libre/linux-libre-grsec/config.i686 @@ -48,7 +48,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-grsec" +CONFIG_LOCALVERSION="-grsec" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/libre/linux-libre-grsec/config.mips64el b/libre/linux-libre-grsec/config.mips64el index 0072421fc..54a49ac3a 100644 --- a/libre/linux-libre-grsec/config.mips64el +++ b/libre/linux-libre-grsec/config.mips64el @@ -172,7 +172,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-grsec" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/libre/linux-libre-grsec/config.x86_64 b/libre/linux-libre-grsec/config.x86_64 index af4f751af..1ed883b66 100644 --- a/libre/linux-libre-grsec/config.x86_64 +++ b/libre/linux-libre-grsec/config.x86_64 @@ -49,7 +49,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-grsec" +CONFIG_LOCALVERSION="-grsec" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/libre/linux-libre-lts/config.i686 b/libre/linux-libre-lts/config.i686 index 37b745087..2cf4c9e55 100644 --- a/libre/linux-libre-lts/config.i686 +++ b/libre/linux-libre-lts/config.i686 @@ -49,7 +49,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-lts" +CONFIG_LOCALVERSION="-lts" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/libre/linux-libre-lts/config.mips64el b/libre/linux-libre-lts/config.mips64el index 80a89075e..7a06af0c9 100644 --- a/libre/linux-libre-lts/config.mips64el +++ b/libre/linux-libre-lts/config.mips64el @@ -175,7 +175,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-lts" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/libre/linux-libre-lts/config.x86_64 b/libre/linux-libre-lts/config.x86_64 index ada845fdc..a98db3b25 100644 --- a/libre/linux-libre-lts/config.x86_64 +++ b/libre/linux-libre-lts/config.x86_64 @@ -50,7 +50,7 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-libre-lts" +CONFIG_LOCALVERSION="-lts" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y diff --git a/libre/linux-libre/PKGBUILD b/libre/linux-libre/PKGBUILD index 49899ab7d..a2477e7d2 100644 --- a/libre/linux-libre/PKGBUILD +++ b/libre/linux-libre/PKGBUILD @@ -9,7 +9,6 @@ # Contributor: Luke Shumaker pkgbase=linux-libre # Build stock "" kernel -#pkgbase=linux-libre-custom # Build kernel with a different name _pkgbasever=3.16-gnu _pkgver=3.16.1-gnu -- cgit v1.2.3