From 29d32123c6ac5c01ba2337aa003633e620d77b23 Mon Sep 17 00:00:00 2001 From: David P Date: Thu, 6 Feb 2020 21:03:29 -0300 Subject: updpkg: libre/linux-libre 5.5.1-1 Signed-off-by: David P --- ...RM-atags-add-support-for-Marvell-s-u-boot.patch | 6 +- ...ctl-and-CONFIG-to-disallow-unprivileged-C.patch | 14 +- ...dt-retrieve-MAC-addresses-from-Marvell-bo.patch | 23 +- ...cie-restore-support-for-Killer-Qu-C0-NICs.patch | 42 +++ ...vres-add-a-helper-function-for-ioremap_uc.patch | 79 ----- ...fix-emission-of-invalid-clone-operations-.patch | 114 +++++++ .../0003-SMILE-Plug-device-tree-file.patch | 10 +- ...d-intel-lpss-Use-devm_ioremap_uc-for-MMIO.patch | 48 --- ...Do-not-disable-interrupt-twice-on-suspend.patch | 99 ------ .../linux-libre/0004-fix-mvsdio-eMMC-timing.patch | 6 +- ...PCI-pciehp-Prevent-deadlock-on-disconnect.patch | 272 ---------------- ...x-Allow-mac-address-to-be-set-as-a-parame.patch | 7 +- ...s2idle-Rework-ACPI-events-synchronization.patch | 78 ----- .../0006-set-default-cubietruck-led-triggers.patch | 10 +- ...odroid-set-higher-minimum-buck2-regulator.patch | 8 +- ...cie-restore-support-for-Killer-Qu-C0-NICs.patch | 36 --- .../0008-ARM-dove-enable-ethernet-on-D3Plug.patch | 8 +- ...ve-AUD_FREQ_CNTRL-state-at-audio-domain-s.patch | 87 ----- .../linux-libre/0009-USB-Armory-MkII-support.patch | 11 +- ...x-audio-power-up-sequence-for-gen10-displ.patch | 57 ---- ...8947-1-Fix-__arch_get_hw_counter-access-t.patch | 28 ++ ...tend-audio-CDCLK-2-BCLK-constraint-to-mor.patch | 41 --- ...mit-audio-CDCLK-2-BCLK-constraint-back-to.patch | 64 ---- ...risepoint-Add-missing-Interrupt-Status-re.patch | 35 -- ...-iwlwifi-mvm-fix-scan-config-command-size.patch | 48 --- ...ert-e1000e-Make-watchdog-use-delayed-work.patch | 174 ---------- libre/linux-libre/PKGBUILD | 122 +++---- libre/linux-libre/config.armv7h | 293 ++++++++++------- libre/linux-libre/config.x86_64 | 355 ++++++++++++--------- 29 files changed, 682 insertions(+), 1493 deletions(-) create mode 100644 libre/linux-libre/0002-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch delete mode 100644 libre/linux-libre/0002-lib-devres-add-a-helper-function-for-ioremap_uc.patch create mode 100644 libre/linux-libre/0003-Btrfs-send-fix-emission-of-invalid-clone-operations-.patch delete mode 100644 libre/linux-libre/0003-mfd-intel-lpss-Use-devm_ioremap_uc-for-MMIO.patch delete mode 100644 libre/linux-libre/0004-PCI-pciehp-Do-not-disable-interrupt-twice-on-suspend.patch delete mode 100644 libre/linux-libre/0005-PCI-pciehp-Prevent-deadlock-on-disconnect.patch delete mode 100644 libre/linux-libre/0006-ACPI-PM-s2idle-Rework-ACPI-events-synchronization.patch delete mode 100644 libre/linux-libre/0007-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch delete mode 100644 libre/linux-libre/0008-drm-i915-save-AUD_FREQ_CNTRL-state-at-audio-domain-s.patch delete mode 100644 libre/linux-libre/0009-drm-i915-Fix-audio-power-up-sequence-for-gen10-displ.patch create mode 100644 libre/linux-libre/0010-Revert-ARM-8947-1-Fix-__arch_get_hw_counter-access-t.patch delete mode 100644 libre/linux-libre/0010-drm-i915-extend-audio-CDCLK-2-BCLK-constraint-to-mor.patch delete mode 100644 libre/linux-libre/0011-drm-i915-Limit-audio-CDCLK-2-BCLK-constraint-back-to.patch delete mode 100644 libre/linux-libre/0012-pinctrl-sunrisepoint-Add-missing-Interrupt-Status-re.patch delete mode 100644 libre/linux-libre/0013-Revert-iwlwifi-mvm-fix-scan-config-command-size.patch delete mode 100644 libre/linux-libre/0014-e1000e-Revert-e1000e-Make-watchdog-use-delayed-work.patch diff --git a/libre/linux-libre/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch b/libre/linux-libre/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch index 074903c47..0d038219b 100644 --- a/libre/linux-libre/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch +++ b/libre/linux-libre/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch @@ -1,7 +1,7 @@ -From 88f69b1dcdda406ba9e4c6ad51f0577623d238b1 Mon Sep 17 00:00:00 2001 +From 970026f1d5752c5d9f3d7f524b18ad5d81f7f436 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:59:28 +0100 -Subject: [PATCH 1/9] ARM: atags: add support for Marvell's u-boot +Subject: [PATCH 01/10] ARM: atags: add support for Marvell's u-boot Marvell uses a specific atag in its u-boot which includes among other information the MAC addresses for up to 4 network interfaces. @@ -47,5 +47,5 @@ index 25ceda63b284..83578c54975b 100644 }; -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0001-ZEN-Add-sysctl-and-CONFIG-to-disallow-unprivileged-C.patch b/libre/linux-libre/0001-ZEN-Add-sysctl-and-CONFIG-to-disallow-unprivileged-C.patch index 114fb76c1..d1b285574 100644 --- a/libre/linux-libre/0001-ZEN-Add-sysctl-and-CONFIG-to-disallow-unprivileged-C.patch +++ b/libre/linux-libre/0001-ZEN-Add-sysctl-and-CONFIG-to-disallow-unprivileged-C.patch @@ -1,7 +1,7 @@ -From a8d736bad70d4062a14c29bdcbed71bef7b575f5 Mon Sep 17 00:00:00 2001 +From 39c1f39f0cd3a533c537a2a6fb0b9dfaa82323bd Mon Sep 17 00:00:00 2001 From: "Jan Alexander Steffens (heftig)" Date: Mon, 16 Sep 2019 04:53:20 +0200 -Subject: [PATCH 01/14] ZEN: Add sysctl and CONFIG to disallow unprivileged +Subject: [PATCH 1/3] ZEN: Add sysctl and CONFIG to disallow unprivileged CLONE_NEWUSER Our default behavior continues to match the vanilla kernel. @@ -13,10 +13,10 @@ Our default behavior continues to match the vanilla kernel. 4 files changed, 50 insertions(+) diff --git a/init/Kconfig b/init/Kconfig -index b4daad2bac23..362f82c5ec07 100644 +index 47d40f399000..6647db098428 100644 --- a/init/Kconfig +++ b/init/Kconfig -@@ -1118,6 +1118,22 @@ config USER_NS +@@ -1103,6 +1103,22 @@ config USER_NS If unsure, say N. @@ -40,7 +40,7 @@ index b4daad2bac23..362f82c5ec07 100644 bool "PID Namespaces" default y diff --git a/kernel/fork.c b/kernel/fork.c -index 755d8160e001..ed909f8050b2 100644 +index 080809560072..1cb7b827b57b 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -106,6 +106,11 @@ @@ -55,7 +55,7 @@ index 755d8160e001..ed909f8050b2 100644 /* * Minimum number of threads to boot the kernel -@@ -1779,6 +1784,10 @@ static __latent_entropy struct task_struct *copy_process( +@@ -1843,6 +1848,10 @@ static __latent_entropy struct task_struct *copy_process( if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS)) return ERR_PTR(-EINVAL); @@ -66,7 +66,7 @@ index 755d8160e001..ed909f8050b2 100644 /* * Thread groups must share signals as well, and detached threads * can only be started up within the thread group. -@@ -2836,6 +2845,12 @@ int ksys_unshare(unsigned long unshare_flags) +@@ -2923,6 +2932,12 @@ int ksys_unshare(unsigned long unshare_flags) if (unshare_flags & CLONE_NEWNS) unshare_flags |= CLONE_FS; diff --git a/libre/linux-libre/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch b/libre/linux-libre/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch index 546120041..7e8f17fb2 100644 --- a/libre/linux-libre/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch +++ b/libre/linux-libre/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch @@ -1,8 +1,8 @@ -From cb931641740269a78b002b438904292a1110a5a7 Mon Sep 17 00:00:00 2001 +From ba8c3d62a09ad9582879577a1a71f36213cdc179 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sun, 2 Dec 2012 19:56:58 +0100 -Subject: [PATCH 2/9] ARM: atags/fdt: retrieve MAC addresses from Marvell boot - loader +Subject: [PATCH 02/10] ARM: atags/fdt: retrieve MAC addresses from Marvell + boot loader The atags are parsed and if a Marvell atag is found, up to 4 MAC addresses are extracted there and assigned to node aliases eth0..3 @@ -13,22 +13,13 @@ address set. Signed-off-by: Willy Tarreau --- - arch/arm/boot/compressed/atags_to_fdt.c | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) + arch/arm/boot/compressed/atags_to_fdt.c | 6 ++++++ + 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c -index 330cd3c2eae5..82f3802ff695 100644 +index 64c49747f8a3..60cd5e5bac93 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -19,7 +19,7 @@ static int node_offset(void *fdt, const char *node_path) - } - - static int setprop(void *fdt, const char *node_path, const char *property, -- uint32_t *val_array, int size) -+ void *val_array, int size) - { - int offset = node_offset(fdt, node_path); - if (offset < 0) @@ -203,6 +203,12 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) hex_str(serno, atag->u.serialnr.high); hex_str(serno+8, atag->u.serialnr.low); @@ -43,5 +34,5 @@ index 330cd3c2eae5..82f3802ff695 100644 } -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0002-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch b/libre/linux-libre/0002-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch new file mode 100644 index 000000000..1555e9c33 --- /dev/null +++ b/libre/linux-libre/0002-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch @@ -0,0 +1,42 @@ +From f47ae71fb991741b0a1335c91e835975f9c598c4 Mon Sep 17 00:00:00 2001 +From: "Jan Alexander Steffens (heftig)" +Date: Tue, 24 Dec 2019 06:16:39 +0100 +Subject: [PATCH 2/3] iwlwifi: pcie: restore support for Killer Qu C0 NICs + +Commit 809805a820c6 ("iwlwifi: pcie: move some cfg mangling from +trans_pcie_alloc to probe") refactored the cfg mangling. Unfortunately, +in this process the lines which picked the right cfg for Killer Qu C0 +NICs after C0 detection were lost. These lines were added by commit +b9500577d361 ("iwlwifi: pcie: handle switching killer Qu B0 NICs to +C0"). + +I suspect this is more of the "merge damage" which commit 7cded5658329 +("iwlwifi: pcie: fix merge damage on making QnJ exclusive") talks about. + +Restore the missing lines so the driver loads the right firmware for +these NICs. + +Fixes: 809805a820c6 ("iwlwifi: pcie: move some cfg mangling from trans_pcie_alloc to probe") +Signed-off-by: Jan Alexander Steffens (heftig) +--- + drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +index b0b7eca1754e..de62a6dc4e73 100644 +--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c ++++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +@@ -1107,6 +1107,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) + cfg = &iwl9560_2ac_cfg_qu_c0_jf_b0; + else if (cfg == &iwl9560_2ac_160_cfg_qu_b0_jf_b0) + cfg = &iwl9560_2ac_160_cfg_qu_c0_jf_b0; ++ else if (cfg == &killer1650s_2ax_cfg_qu_b0_hr_b0) ++ cfg = &killer1650s_2ax_cfg_qu_c0_hr_b0; ++ else if (cfg == &killer1650i_2ax_cfg_qu_b0_hr_b0) ++ cfg = &killer1650i_2ax_cfg_qu_c0_hr_b0; + } + + /* same thing for QuZ... */ +-- +2.25.0 + diff --git a/libre/linux-libre/0002-lib-devres-add-a-helper-function-for-ioremap_uc.patch b/libre/linux-libre/0002-lib-devres-add-a-helper-function-for-ioremap_uc.patch deleted file mode 100644 index ab555f350..000000000 --- a/libre/linux-libre/0002-lib-devres-add-a-helper-function-for-ioremap_uc.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 1e41b685fcac38c05219030acb033a42832f7459 Mon Sep 17 00:00:00 2001 -From: Tuowen Zhao -Date: Wed, 16 Oct 2019 15:06:28 -0600 -Subject: [PATCH 02/14] lib: devres: add a helper function for ioremap_uc - -Implement a resource managed strongly uncachable ioremap function. - -Cc: # v4.19+ -Tested-by: AceLan Kao -Signed-off-by: Tuowen Zhao -Acked-by: Mika Westerberg -Acked-by: Andy Shevchenko -Acked-by: Luis Chamberlain -Signed-off-by: Lee Jones ---- - include/linux/io.h | 2 ++ - lib/devres.c | 19 +++++++++++++++++++ - 2 files changed, 21 insertions(+) - -diff --git a/include/linux/io.h b/include/linux/io.h -index accac822336a..a59834bc0a11 100644 ---- a/include/linux/io.h -+++ b/include/linux/io.h -@@ -64,6 +64,8 @@ static inline void devm_ioport_unmap(struct device *dev, void __iomem *addr) - - void __iomem *devm_ioremap(struct device *dev, resource_size_t offset, - resource_size_t size); -+void __iomem *devm_ioremap_uc(struct device *dev, resource_size_t offset, -+ resource_size_t size); - void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset, - resource_size_t size); - void __iomem *devm_ioremap_wc(struct device *dev, resource_size_t offset, -diff --git a/lib/devres.c b/lib/devres.c -index 6a0e9bd6524a..17624d35e82d 100644 ---- a/lib/devres.c -+++ b/lib/devres.c -@@ -9,6 +9,7 @@ - enum devm_ioremap_type { - DEVM_IOREMAP = 0, - DEVM_IOREMAP_NC, -+ DEVM_IOREMAP_UC, - DEVM_IOREMAP_WC, - }; - -@@ -39,6 +40,9 @@ static void __iomem *__devm_ioremap(struct device *dev, resource_size_t offset, - case DEVM_IOREMAP_NC: - addr = ioremap_nocache(offset, size); - break; -+ case DEVM_IOREMAP_UC: -+ addr = ioremap_uc(offset, size); -+ break; - case DEVM_IOREMAP_WC: - addr = ioremap_wc(offset, size); - break; -@@ -68,6 +72,21 @@ void __iomem *devm_ioremap(struct device *dev, resource_size_t offset, - } - EXPORT_SYMBOL(devm_ioremap); - -+/** -+ * devm_ioremap_uc - Managed ioremap_uc() -+ * @dev: Generic device to remap IO address for -+ * @offset: Resource address to map -+ * @size: Size of map -+ * -+ * Managed ioremap_uc(). Map is automatically unmapped on driver detach. -+ */ -+void __iomem *devm_ioremap_uc(struct device *dev, resource_size_t offset, -+ resource_size_t size) -+{ -+ return __devm_ioremap(dev, offset, size, DEVM_IOREMAP_UC); -+} -+EXPORT_SYMBOL_GPL(devm_ioremap_uc); -+ - /** - * devm_ioremap_nocache - Managed ioremap_nocache() - * @dev: Generic device to remap IO address for --- -2.25.0 - diff --git a/libre/linux-libre/0003-Btrfs-send-fix-emission-of-invalid-clone-operations-.patch b/libre/linux-libre/0003-Btrfs-send-fix-emission-of-invalid-clone-operations-.patch new file mode 100644 index 000000000..fcf18b356 --- /dev/null +++ b/libre/linux-libre/0003-Btrfs-send-fix-emission-of-invalid-clone-operations-.patch @@ -0,0 +1,114 @@ +From 693469a2b9d6d27282c06ed55cb70ff648740efd Mon Sep 17 00:00:00 2001 +From: Filipe Manana +Date: Fri, 24 Jan 2020 11:52:04 +0000 +Subject: [PATCH 3/3] Btrfs: send, fix emission of invalid clone operations + within the same file + +When doing an incremental send and a file has extents shared with itself +at different file offsets, it's possible for send to emit clone operations +that will fail at the destination because the source range goes beyond the +file's current size. This happens when the file size has increased in the +send snapshot, there is a hole between the shared extents and both shared +extents are at file offsets which are greater the file's size in the +parent snapshot. + +Example: + + $ mkfs.btrfs -f /dev/sdb + $ mount /dev/sdb /mnt/sdb + + $ xfs_io -f -c "pwrite -S 0xf1 0 64K" /mnt/sdb/foobar + $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/base + $ btrfs send -f /tmp/1.snap /mnt/sdb/base + + # Create a 320K extent at file offset 512K. + $ xfs_io -c "pwrite -S 0xab 512K 64K" /mnt/sdb/foobar + $ xfs_io -c "pwrite -S 0xcd 576K 64K" /mnt/sdb/foobar + $ xfs_io -c "pwrite -S 0xef 640K 64K" /mnt/sdb/foobar + $ xfs_io -c "pwrite -S 0x64 704K 64K" /mnt/sdb/foobar + $ xfs_io -c "pwrite -S 0x73 768K 64K" /mnt/sdb/foobar + + # Clone part of that 320K extent into a lower file offset (192K). + # This file offset is greater than the file's size in the parent + # snapshot (64K). Also the clone range is a bit behind the offset of + # the 320K extent so that we leave a hole between the shared extents. + $ xfs_io -c "reflink /mnt/sdb/foobar 448K 192K 192K" /mnt/sdb/foobar + + $ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/incr + $ btrfs send -p /mnt/sdb/base -f /tmp/2.snap /mnt/sdb/incr + + $ mkfs.btrfs -f /dev/sdc + $ mount /dev/sdc /mnt/sdc + + $ btrfs receive -f /tmp/1.snap /mnt/sdc + $ btrfs receive -f /tmp/2.snap /mnt/sdc + ERROR: failed to clone extents to foobar: Invalid argument + +The problem is that after processing the extent at file offset 192K, send +does not issue a write operation full of zeroes for the hole between that +extent and the extent starting at file offset 520K (hole range from 384K +to 512K), this is because the hole is at an offset larger the size of the +file in the parent snapshot (384K > 64K). As a consequence the field +'cur_inode_next_write_offset' of the send context remains with a value of +384K when we start to process the extent at file offset 512K, which is the +value set after processing the extent at offset 192K. + +This screws up the lookup of possible extents to clone because due to an +incorrect value of 'cur_inode_next_write_offset' we can now consider +extents for cloning, in the same inode, that lie beyond the current size +of the file in the receiver of the send stream. Also, when checking if +an extent in the same file can be used for cloning, we must also check +that not only its start offset doesn't start at or beyond the current eof +of the file in the receiver but that the source range doesn't go beyond +current eof, that is we must check offset + length does not cross the +current eof, as that makes clone operations fail with -EINVAL. + +So fix this by updating 'cur_inode_next_write_offset' whenever we start +processing an extent and checking an extent's offset and length when +considering it for cloning operations. + +A test case for fstests follows soon. + +Fixes: 11f2069c113e02 ("Btrfs: send, allow clone operations within the same file") +Signed-off-by: Filipe Manana +Reviewed-by: Josef Bacik +--- + fs/btrfs/send.c | 15 ++++++++++++++- + 1 file changed, 14 insertions(+), 1 deletion(-) + +diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c +index 091e5bc8c7ea..0b42dac8a35f 100644 +--- a/fs/btrfs/send.c ++++ b/fs/btrfs/send.c +@@ -1269,7 +1269,8 @@ static int __iterate_backrefs(u64 ino, u64 offset, u64 root, void *ctx_) + * destination of the stream. + */ + if (ino == bctx->cur_objectid && +- offset >= bctx->sctx->cur_inode_next_write_offset) ++ offset + bctx->extent_len > ++ bctx->sctx->cur_inode_next_write_offset) + return 0; + } + +@@ -5804,6 +5805,18 @@ static int process_extent(struct send_ctx *sctx, + } + } + ++ /* ++ * There might be a hole between the end of the last processed extent ++ * and this extent, and we may have not sent a write operation for that ++ * hole because it was not needed (range is beyond eof in the parent ++ * snapshot). So adjust the next write offset to the offset of this ++ * extent, as we want to make sure we don't do mistakes when checking if ++ * we can clone this extent from some other offset in this inode or when ++ * detecting if we need to issue a truncate operation when finishing the ++ * processing this inode. ++ */ ++ sctx->cur_inode_next_write_offset = key->offset; ++ + ret = find_extent_clone(sctx, path, key->objectid, key->offset, + sctx->cur_inode_size, &found_clone); + if (ret != -ENOENT && ret < 0) +-- +2.25.0 + diff --git a/libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch b/libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch index b07e149b7..683074a2f 100644 --- a/libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch +++ b/libre/linux-libre/0003-SMILE-Plug-device-tree-file.patch @@ -1,7 +1,7 @@ -From 8dc29eb34efbef2aa3ce6e499cea11765286ffbd Mon Sep 17 00:00:00 2001 +From 2fd36c0086abd28bbbc98d4d147939c0a588c9e2 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:41:19 -0600 -Subject: [PATCH 3/9] SMILE Plug device tree file +Subject: [PATCH 03/10] SMILE Plug device tree file This adds a dts file for the SMILE Plug, which only differs from the Mirabox dts with the LED definitions. @@ -14,10 +14,10 @@ Signed-off-by: Kevin Mihelich create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index b21b3a64641a..a0f92b9dbd7d 100644 +index 08011dc8c7a6..9f10323ecfde 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -1216,6 +1216,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ +@@ -1227,6 +1227,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ armada-370-dlink-dns327l.dtb \ armada-370-mirabox.dtb \ @@ -205,5 +205,5 @@ index 000000000000..d01308ab848b + }; +}; -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0003-mfd-intel-lpss-Use-devm_ioremap_uc-for-MMIO.patch b/libre/linux-libre/0003-mfd-intel-lpss-Use-devm_ioremap_uc-for-MMIO.patch deleted file mode 100644 index 6cc8e24d4..000000000 --- a/libre/linux-libre/0003-mfd-intel-lpss-Use-devm_ioremap_uc-for-MMIO.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 3f0415751d3c1456d314a46d9f28053c8c2a7afa Mon Sep 17 00:00:00 2001 -From: Tuowen Zhao -Date: Wed, 16 Oct 2019 15:06:29 -0600 -Subject: [PATCH 03/14] mfd: intel-lpss: Use devm_ioremap_uc for MMIO - -Some BIOS erroneously specifies write-combining BAR for intel-lpss-pci -in MTRR. This will cause the system to hang during boot. If possible, -this bug could be corrected with a firmware update. - -This patch use devm_ioremap_uc to overwrite/ignore the MTRR settings -by forcing the use of strongly uncachable pages for intel-lpss. - -The BIOS bug is present on Dell XPS 13 7390 2-in-1: - -[ 0.001734] 5 base 4000000000 mask 6000000000 write-combining - -4000000000-7fffffffff : PCI Bus 0000:00 - 4000000000-400fffffff : 0000:00:02.0 (i915) - 4010000000-4010000fff : 0000:00:15.0 (intel-lpss-pci) - -Link: https://bugzilla.kernel.org/show_bug.cgi?id=203485 -Cc: # v4.19+ -Tested-by: AceLan Kao -Signed-off-by: Tuowen Zhao -Acked-by: Mika Westerberg -Acked-by: Andy Shevchenko -Tested-by: Roman Gilg -Signed-off-by: Lee Jones ---- - drivers/mfd/intel-lpss.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c -index bfe4ff337581..b0f0781a6b9c 100644 ---- a/drivers/mfd/intel-lpss.c -+++ b/drivers/mfd/intel-lpss.c -@@ -384,7 +384,7 @@ int intel_lpss_probe(struct device *dev, - if (!lpss) - return -ENOMEM; - -- lpss->priv = devm_ioremap(dev, info->mem->start + LPSS_PRIV_OFFSET, -+ lpss->priv = devm_ioremap_uc(dev, info->mem->start + LPSS_PRIV_OFFSET, - LPSS_PRIV_SIZE); - if (!lpss->priv) - return -ENOMEM; --- -2.25.0 - diff --git a/libre/linux-libre/0004-PCI-pciehp-Do-not-disable-interrupt-twice-on-suspend.patch b/libre/linux-libre/0004-PCI-pciehp-Do-not-disable-interrupt-twice-on-suspend.patch deleted file mode 100644 index 5a689f397..000000000 --- a/libre/linux-libre/0004-PCI-pciehp-Do-not-disable-interrupt-twice-on-suspend.patch +++ /dev/null @@ -1,99 +0,0 @@ -From ea5b8c60cd739ed3166d8c0f0cba6df6f57d271f Mon Sep 17 00:00:00 2001 -From: Mika Westerberg -Date: Tue, 29 Oct 2019 20:00:21 +0300 -Subject: [PATCH 04/14] PCI: pciehp: Do not disable interrupt twice on suspend - -We try to keep PCIe hotplug ports runtime suspended when entering system -suspend. Because the PCIe portdrv sets the DPM_FLAG_NEVER_SKIP flag, the PM -core always calls system suspend/resume hooks even if the device is left -runtime suspended. Since PCIe hotplug driver re-used the same function for -both runtime suspend and system suspend, it ended up disabling hotplug -interrupt twice and the second time following was printed: - - pciehp 0000:03:01.0:pcie204: pcie_do_write_cmd: no response from device - -Prevent this from happening by checking whether the device is already -runtime suspended when the system suspend hook is called. - -Fixes: 9c62f0bfb832 ("PCI: pciehp: Implement runtime PM callbacks") -Link: https://lore.kernel.org/r/20191029170022.57528-1-mika.westerberg@linux.intel.com -Reported-by: Kai-Heng Feng -Tested-by: Kai-Heng Feng -Signed-off-by: Mika Westerberg -Signed-off-by: Bjorn Helgaas -Reviewed-by: Rafael J. Wysocki ---- - drivers/pci/hotplug/pciehp_core.c | 25 +++++++++++++++++++++++-- - 1 file changed, 23 insertions(+), 2 deletions(-) - -diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c -index b3122c151b80..56daad828c9e 100644 ---- a/drivers/pci/hotplug/pciehp_core.c -+++ b/drivers/pci/hotplug/pciehp_core.c -@@ -253,7 +253,7 @@ static bool pme_is_native(struct pcie_device *dev) - return pcie_ports_native || host->native_pme; - } - --static int pciehp_suspend(struct pcie_device *dev) -+static void pciehp_disable_interrupt(struct pcie_device *dev) - { - /* - * Disable hotplug interrupt so that it does not trigger -@@ -261,7 +261,19 @@ static int pciehp_suspend(struct pcie_device *dev) - */ - if (pme_is_native(dev)) - pcie_disable_interrupt(get_service_data(dev)); -+} - -+#ifdef CONFIG_PM_SLEEP -+static int pciehp_suspend(struct pcie_device *dev) -+{ -+ /* -+ * If the port is already runtime suspended we can keep it that -+ * way. -+ */ -+ if (dev_pm_smart_suspend_and_suspended(&dev->port->dev)) -+ return 0; -+ -+ pciehp_disable_interrupt(dev); - return 0; - } - -@@ -279,6 +291,7 @@ static int pciehp_resume_noirq(struct pcie_device *dev) - - return 0; - } -+#endif - - static int pciehp_resume(struct pcie_device *dev) - { -@@ -292,6 +305,12 @@ static int pciehp_resume(struct pcie_device *dev) - return 0; - } - -+static int pciehp_runtime_suspend(struct pcie_device *dev) -+{ -+ pciehp_disable_interrupt(dev); -+ return 0; -+} -+ - static int pciehp_runtime_resume(struct pcie_device *dev) - { - struct controller *ctrl = get_service_data(dev); -@@ -318,10 +337,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = { - .remove = pciehp_remove, - - #ifdef CONFIG_PM -+#ifdef CONFIG_PM_SLEEP - .suspend = pciehp_suspend, - .resume_noirq = pciehp_resume_noirq, - .resume = pciehp_resume, -- .runtime_suspend = pciehp_suspend, -+#endif -+ .runtime_suspend = pciehp_runtime_suspend, - .runtime_resume = pciehp_runtime_resume, - #endif /* PM */ - }; --- -2.25.0 - diff --git a/libre/linux-libre/0004-fix-mvsdio-eMMC-timing.patch b/libre/linux-libre/0004-fix-mvsdio-eMMC-timing.patch index 791a546d6..81f90ebd9 100644 --- a/libre/linux-libre/0004-fix-mvsdio-eMMC-timing.patch +++ b/libre/linux-libre/0004-fix-mvsdio-eMMC-timing.patch @@ -1,7 +1,7 @@ -From 579d132a05177e4b85d3ff2321762948fd78b420 Mon Sep 17 00:00:00 2001 +From c49db8d7558931cf54a5e3ed4565ecbfda2a989a Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Fri, 5 Sep 2014 15:43:56 -0600 -Subject: [PATCH 4/9] fix mvsdio eMMC timing +Subject: [PATCH 04/10] fix mvsdio eMMC timing These changes from Globalscale change the MMC timing to allow the eMMC versions of the Mirabox and SMILE Plug to work. @@ -34,5 +34,5 @@ index 74a0a7fbbf7f..92eadb116762 100644 host->clock = ios->clock; host->ns_per_clk = 1000000000 / (host->base_clock / (m+1)); -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0005-PCI-pciehp-Prevent-deadlock-on-disconnect.patch b/libre/linux-libre/0005-PCI-pciehp-Prevent-deadlock-on-disconnect.patch deleted file mode 100644 index aace8aacb..000000000 --- a/libre/linux-libre/0005-PCI-pciehp-Prevent-deadlock-on-disconnect.patch +++ /dev/null @@ -1,272 +0,0 @@ -From 02dc4cbf4b169ff89a2380b178e07e20eb661d62 Mon Sep 17 00:00:00 2001 -From: Mika Westerberg -Date: Tue, 29 Oct 2019 20:00:22 +0300 -Subject: [PATCH 05/14] PCI: pciehp: Prevent deadlock on disconnect - -This addresses deadlocks in these common cases in hierarchies containing -two switches: - - - All involved ports are runtime suspended and they are unplugged. This - can happen easily if the drivers involved automatically enable runtime - PM (xHCI for example does that). - - - System is suspended (e.g., closing the lid on a laptop) with a dock + - something else connected, and the dock is unplugged while suspended. - -These cases lead to the following deadlock: - - INFO: task irq/126-pciehp:198 blocked for more than 120 seconds. - irq/126-pciehp D 0 198 2 0x80000000 - Call Trace: - schedule+0x2c/0x80 - schedule_timeout+0x246/0x350 - wait_for_completion+0xb7/0x140 - kthread_stop+0x49/0x110 - free_irq+0x32/0x70 - pcie_shutdown_notification+0x2f/0x50 - pciehp_remove+0x27/0x50 - pcie_port_remove_service+0x36/0x50 - device_release_driver+0x12/0x20 - bus_remove_device+0xec/0x160 - device_del+0x13b/0x350 - device_unregister+0x1a/0x60 - remove_iter+0x1e/0x30 - device_for_each_child+0x56/0x90 - pcie_port_device_remove+0x22/0x40 - pcie_portdrv_remove+0x20/0x60 - pci_device_remove+0x3e/0xc0 - device_release_driver_internal+0x18c/0x250 - device_release_driver+0x12/0x20 - pci_stop_bus_device+0x6f/0x90 - pci_stop_bus_device+0x31/0x90 - pci_stop_and_remove_bus_device+0x12/0x20 - pciehp_unconfigure_device+0x88/0x140 - pciehp_disable_slot+0x6a/0x110 - pciehp_handle_presence_or_link_change+0x263/0x400 - pciehp_ist+0x1c9/0x1d0 - irq_thread_fn+0x24/0x60 - irq_thread+0xeb/0x190 - kthread+0x120/0x140 - - INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds. - irq/190-pciehp D 0 2288 2 0x80000000 - Call Trace: - __schedule+0x2a2/0x880 - schedule+0x2c/0x80 - schedule_preempt_disabled+0xe/0x10 - mutex_lock+0x2c/0x30 - pci_lock_rescan_remove+0x15/0x20 - pciehp_unconfigure_device+0x4d/0x140 - pciehp_disable_slot+0x6a/0x110 - pciehp_handle_presence_or_link_change+0x263/0x400 - pciehp_ist+0x1c9/0x1d0 - irq_thread_fn+0x24/0x60 - irq_thread+0xeb/0x190 - kthread+0x120/0x140 - -What happens here is that the whole hierarchy is runtime resumed and the -parent PCIe downstream port, which got the hot-remove event, starts -removing devices below it, taking pci_lock_rescan_remove() lock. When the -child PCIe port is runtime resumed it calls pciehp_check_presence() which -ends up calling pciehp_card_present() and pciehp_check_link_active(). Both -of these use pcie_capability_read_word(), which notices that the underlying -device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the -capability value set to 0. When pciehp gets this value it thinks that its -child device is also hot-removed and schedules its IRQ thread to handle the -event. - -The deadlock happens when the child's IRQ thread runs and tries to acquire -pci_lock_rescan_remove() which is already taken by the parent and the -parent waits for the child's IRQ thread to finish. - -Prevent this from happening by checking the return value of -pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop -performing any hot-removal activities. - -[bhelgaas: add common scenarios to commit log] -Link: https://lore.kernel.org/r/20191029170022.57528-2-mika.westerberg@linux.intel.com -Tested-by: Kai-Heng Feng -Signed-off-by: Mika Westerberg -Signed-off-by: Bjorn Helgaas ---- - drivers/pci/hotplug/pciehp.h | 6 ++-- - drivers/pci/hotplug/pciehp_core.c | 11 ++++-- - drivers/pci/hotplug/pciehp_ctrl.c | 4 +-- - drivers/pci/hotplug/pciehp_hpc.c | 59 +++++++++++++++++++++++++------ - 4 files changed, 61 insertions(+), 19 deletions(-) - -diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h -index 882ce82c4699..aa61d4c219d7 100644 ---- a/drivers/pci/hotplug/pciehp.h -+++ b/drivers/pci/hotplug/pciehp.h -@@ -174,10 +174,10 @@ void pciehp_set_indicators(struct controller *ctrl, int pwr, int attn); - - void pciehp_get_latch_status(struct controller *ctrl, u8 *status); - int pciehp_query_power_fault(struct controller *ctrl); --bool pciehp_card_present(struct controller *ctrl); --bool pciehp_card_present_or_link_active(struct controller *ctrl); -+int pciehp_card_present(struct controller *ctrl); -+int pciehp_card_present_or_link_active(struct controller *ctrl); - int pciehp_check_link_status(struct controller *ctrl); --bool pciehp_check_link_active(struct controller *ctrl); -+int pciehp_check_link_active(struct controller *ctrl); - void pciehp_release_ctrl(struct controller *ctrl); - - int pciehp_sysfs_enable_slot(struct hotplug_slot *hotplug_slot); -diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c -index 56daad828c9e..312cc45c44c7 100644 ---- a/drivers/pci/hotplug/pciehp_core.c -+++ b/drivers/pci/hotplug/pciehp_core.c -@@ -139,10 +139,15 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) - { - struct controller *ctrl = to_ctrl(hotplug_slot); - struct pci_dev *pdev = ctrl->pcie->port; -+ int ret; - - pci_config_pm_runtime_get(pdev); -- *value = pciehp_card_present_or_link_active(ctrl); -+ ret = pciehp_card_present_or_link_active(ctrl); - pci_config_pm_runtime_put(pdev); -+ if (ret < 0) -+ return ret; -+ -+ *value = ret; - return 0; - } - -@@ -158,13 +163,13 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) - */ - static void pciehp_check_presence(struct controller *ctrl) - { -- bool occupied; -+ int occupied; - - down_read(&ctrl->reset_lock); - mutex_lock(&ctrl->state_lock); - - occupied = pciehp_card_present_or_link_active(ctrl); -- if ((occupied && (ctrl->state == OFF_STATE || -+ if ((occupied > 0 && (ctrl->state == OFF_STATE || - ctrl->state == BLINKINGON_STATE)) || - (!occupied && (ctrl->state == ON_STATE || - ctrl->state == BLINKINGOFF_STATE))) -diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c -index dd8e4a5fb282..6503d15effbb 100644 ---- a/drivers/pci/hotplug/pciehp_ctrl.c -+++ b/drivers/pci/hotplug/pciehp_ctrl.c -@@ -226,7 +226,7 @@ void pciehp_handle_disable_request(struct controller *ctrl) - - void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events) - { -- bool present, link_active; -+ int present, link_active; - - /* - * If the slot is on and presence or link has changed, turn it off. -@@ -257,7 +257,7 @@ void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events) - mutex_lock(&ctrl->state_lock); - present = pciehp_card_present(ctrl); - link_active = pciehp_check_link_active(ctrl); -- if (!present && !link_active) { -+ if (present <= 0 && link_active <= 0) { - mutex_unlock(&ctrl->state_lock); - return; - } -diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c -index 86d97f3112f0..a2a263764ef8 100644 ---- a/drivers/pci/hotplug/pciehp_hpc.c -+++ b/drivers/pci/hotplug/pciehp_hpc.c -@@ -201,17 +201,29 @@ static void pcie_write_cmd_nowait(struct controller *ctrl, u16 cmd, u16 mask) - pcie_do_write_cmd(ctrl, cmd, mask, false); - } - --bool pciehp_check_link_active(struct controller *ctrl) -+/** -+ * pciehp_check_link_active() - Is the link active -+ * @ctrl: PCIe hotplug controller -+ * -+ * Check whether the downstream link is currently active. Note it is -+ * possible that the card is removed immediately after this so the -+ * caller may need to take it into account. -+ * -+ * If the hotplug controller itself is not available anymore returns -+ * %-ENODEV. -+ */ -+int pciehp_check_link_active(struct controller *ctrl) - { - struct pci_dev *pdev = ctrl_dev(ctrl); - u16 lnk_status; -- bool ret; -+ int ret; - -- pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); -- ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA); -+ ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); -+ if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)~0) -+ return -ENODEV; - -- if (ret) -- ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); -+ ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA); -+ ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); - - return ret; - } -@@ -373,13 +385,29 @@ void pciehp_get_latch_status(struct controller *ctrl, u8 *status) - *status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS); - } - --bool pciehp_card_present(struct controller *ctrl) -+/** -+ * pciehp_card_present() - Is the card present -+ * @ctrl: PCIe hotplug controller -+ * -+ * Function checks whether the card is currently present in the slot and -+ * in that case returns true. Note it is possible that the card is -+ * removed immediately after the check so the caller may need to take -+ * this into account. -+ * -+ * It the hotplug controller itself is not available anymore returns -+ * %-ENODEV. -+ */ -+int pciehp_card_present(struct controller *ctrl) - { - struct pci_dev *pdev = ctrl_dev(ctrl); - u16 slot_status; -+ int ret; - -- pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); -- return slot_status & PCI_EXP_SLTSTA_PDS; -+ ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); -+ if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)~0) -+ return -ENODEV; -+ -+ return !!(slot_status & PCI_EXP_SLTSTA_PDS); - } - - /** -@@ -390,10 +418,19 @@ bool pciehp_card_present(struct controller *ctrl) - * Presence Detect State bit, this helper also returns true if the Link Active - * bit is set. This is a concession to broken hotplug ports which hardwire - * Presence Detect State to zero, such as Wilocity's [1ae9:0200]. -+ * -+ * Returns: %1 if the slot is occupied and %0 if it is not. If the hotplug -+ * port is not present anymore returns %-ENODEV. - */ --bool pciehp_card_present_or_link_active(struct controller *ctrl) -+int pciehp_card_present_or_link_active(struct controller *ctrl) - { -- return pciehp_card_present(ctrl) || pciehp_check_link_active(ctrl); -+ int ret; -+ -+ ret = pciehp_card_present(ctrl); -+ if (ret) -+ return ret; -+ -+ return pciehp_check_link_active(ctrl); - } - - int pciehp_query_power_fault(struct controller *ctrl) --- -2.25.0 - diff --git a/libre/linux-libre/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch b/libre/linux-libre/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch index e95960163..3ae8471eb 100644 --- a/libre/linux-libre/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch +++ b/libre/linux-libre/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch @@ -1,7 +1,8 @@ -From 585c73f82751043ebcf1e097a29bb9c6d2c3fbd1 Mon Sep 17 00:00:00 2001 +From afac272fddea145b4ba7532370818ada190b4058 Mon Sep 17 00:00:00 2001 From: popcornmix Date: Tue, 18 Feb 2014 01:43:50 -0300 -Subject: [PATCH 5/9] net/smsc95xx: Allow mac address to be set as a parameter +Subject: [PATCH 05/10] net/smsc95xx: Allow mac address to be set as a + parameter --- drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++ @@ -91,5 +92,5 @@ index 355be77f4241..c94a7193e0b9 100644 /* maybe the boot loader passed the MAC address in devicetree */ -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0006-ACPI-PM-s2idle-Rework-ACPI-events-synchronization.patch b/libre/linux-libre/0006-ACPI-PM-s2idle-Rework-ACPI-events-synchronization.patch deleted file mode 100644 index 744a09838..000000000 --- a/libre/linux-libre/0006-ACPI-PM-s2idle-Rework-ACPI-events-synchronization.patch +++ /dev/null @@ -1,78 +0,0 @@ -From b5ae067d036c7d621af4178bba61c8c6fa3c7850 Mon Sep 17 00:00:00 2001 -From: "Rafael J. Wysocki" -Date: Thu, 28 Nov 2019 23:50:40 +0100 -Subject: [PATCH 06/14] ACPI: PM: s2idle: Rework ACPI events synchronization - -Note that the EC GPE processing need not be synchronized in -acpi_s2idle_wake() after invoking acpi_ec_dispatch_gpe(), because -that function checks the GPE status and dispatches its handler if -need be and the SCI action handler is not going to run anyway at -that point. - -Moreover, it is better to drain all of the pending ACPI events -before restoring the working-state configuration of GPEs in -acpi_s2idle_restore(), because those events are likely to be related -to system wakeup, in which case they will not be relevant going -forward. - -Rework the code to take these observations into account. - -Signed-off-by: Rafael J. Wysocki ---- - drivers/acpi/sleep.c | 26 +++++++++++++++++++------- - 1 file changed, 19 insertions(+), 7 deletions(-) - -diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c -index 2af937a8b1c5..6747a279621b 100644 ---- a/drivers/acpi/sleep.c -+++ b/drivers/acpi/sleep.c -@@ -977,6 +977,16 @@ static int acpi_s2idle_prepare_late(void) - return 0; - } - -+static void acpi_s2idle_sync(void) -+{ -+ /* -+ * The EC driver uses the system workqueue and an additional special -+ * one, so those need to be flushed too. -+ */ -+ acpi_ec_flush_work(); -+ acpi_os_wait_events_complete(); /* synchronize Notify handling */ -+} -+ - static void acpi_s2idle_wake(void) - { - /* -@@ -1001,13 +1011,8 @@ static void acpi_s2idle_wake(void) - * should be missed by canceling the wakeup here. - */ - pm_system_cancel_wakeup(); -- /* -- * The EC driver uses the system workqueue and an additional -- * special one, so those need to be flushed too. -- */ -- acpi_os_wait_events_complete(); /* synchronize EC GPE processing */ -- acpi_ec_flush_work(); -- acpi_os_wait_events_complete(); /* synchronize Notify handling */ -+ -+ acpi_s2idle_sync(); - - rearm_wake_irq(acpi_sci_irq); - } -@@ -1024,6 +1029,13 @@ static void acpi_s2idle_restore_early(void) - - static void acpi_s2idle_restore(void) - { -+ /* -+ * Drain pending events before restoring the working-state configuration -+ * of GPEs. -+ */ -+ acpi_os_wait_events_complete(); /* synchronize GPE processing */ -+ acpi_s2idle_sync(); -+ - s2idle_wakeup = false; - - acpi_enable_all_runtime_gpes(); --- -2.25.0 - diff --git a/libre/linux-libre/0006-set-default-cubietruck-led-triggers.patch b/libre/linux-libre/0006-set-default-cubietruck-led-triggers.patch index efbbb49c4..05a6eeabd 100644 --- a/libre/linux-libre/0006-set-default-cubietruck-led-triggers.patch +++ b/libre/linux-libre/0006-set-default-cubietruck-led-triggers.patch @@ -1,7 +1,7 @@ -From 8fb925eac047386a298303e501042a0fd30e9ef9 Mon Sep 17 00:00:00 2001 +From f99f3a8c0e2db1d9dd487cd70569098f36bb325e Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sat, 14 Feb 2015 12:32:27 +0100 -Subject: [PATCH 6/9] set default cubietruck led triggers +Subject: [PATCH 06/10] set default cubietruck led triggers Signed-off-by: Kevin Mihelich --- @@ -12,7 +12,7 @@ diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7 index 8c8dee6ea461..4f52a11b913e 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -78,6 +78,7 @@ +@@ -78,6 +78,7 @@ leds { blue { label = "cubietruck:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; @@ -20,7 +20,7 @@ index 8c8dee6ea461..4f52a11b913e 100644 }; orange { -@@ -93,6 +94,7 @@ +@@ -93,6 +94,7 @@ white { green { label = "cubietruck:green:usr"; gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; @@ -29,5 +29,5 @@ index 8c8dee6ea461..4f52a11b913e 100644 }; -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch b/libre/linux-libre/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch index 40413f479..0bac600f6 100644 --- a/libre/linux-libre/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch +++ b/libre/linux-libre/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch @@ -1,7 +1,7 @@ -From 054ac5f337ad4f79b22c9b191dc47f001722f0d6 Mon Sep 17 00:00:00 2001 +From 318282bc517494fa1b17c1b6433b3005337d07b4 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Thu, 11 Aug 2016 00:42:37 -0600 -Subject: [PATCH 7/9] exynos4412-odroid: set higher minimum buck2 regulator +Subject: [PATCH 07/10] exynos4412-odroid: set higher minimum buck2 regulator voltage Set a higher minimum voltage to help reboot issue. @@ -16,7 +16,7 @@ diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts index ea55f377d17c..a7bfc58bbc79 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi -@@ -430,7 +430,7 @@ +@@ -430,7 +430,7 @@ buck1_reg: BUCK1 { buck2_reg: BUCK2 { regulator-name = "vdd_arm"; @@ -26,5 +26,5 @@ index ea55f377d17c..a7bfc58bbc79 100644 regulator-always-on; regulator-boot-on; -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0007-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch b/libre/linux-libre/0007-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch deleted file mode 100644 index 775af4764..000000000 --- a/libre/linux-libre/0007-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 6c245b6bc1a0c4979566dbd13edcb553919010d7 Mon Sep 17 00:00:00 2001 -From: "Jan Alexander Steffens (heftig)" -Date: Tue, 24 Dec 2019 05:18:47 +0100 -Subject: [PATCH 07/14] iwlwifi: pcie: restore support for Killer Qu C0 NICs - -Commit 809805a820c6 refactored the cfg mangling. Unfortunately, in this -process the lines which picked the right cfg for Killer Qu C0 NICs after -C0 detection were lost. These lines were added by commit b9500577d361. - -I suspect this is more of the "merge damage" which commit 7cded5658329 -talks about. - -Fixes: 809805a820c6 ("iwlwifi: pcie: move some cfg mangling from trans_pcie_alloc to probe") -Signed-off-by: Jan Alexander Steffens (heftig) ---- - drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c -index b0b7eca1754e..de62a6dc4e73 100644 ---- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c -+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c -@@ -1107,6 +1107,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) - cfg = &iwl9560_2ac_cfg_qu_c0_jf_b0; - else if (cfg == &iwl9560_2ac_160_cfg_qu_b0_jf_b0) - cfg = &iwl9560_2ac_160_cfg_qu_c0_jf_b0; -+ else if (cfg == &killer1650s_2ax_cfg_qu_b0_hr_b0) -+ cfg = &killer1650s_2ax_cfg_qu_c0_hr_b0; -+ else if (cfg == &killer1650i_2ax_cfg_qu_b0_hr_b0) -+ cfg = &killer1650i_2ax_cfg_qu_c0_hr_b0; - } - - /* same thing for QuZ... */ --- -2.25.0 - diff --git a/libre/linux-libre/0008-ARM-dove-enable-ethernet-on-D3Plug.patch b/libre/linux-libre/0008-ARM-dove-enable-ethernet-on-D3Plug.patch index b1687bf5c..a31dc210e 100644 --- a/libre/linux-libre/0008-ARM-dove-enable-ethernet-on-D3Plug.patch +++ b/libre/linux-libre/0008-ARM-dove-enable-ethernet-on-D3Plug.patch @@ -1,7 +1,7 @@ -From 8b696580b73c7f6e7f3e9635bd2ad1c5c59e9082 Mon Sep 17 00:00:00 2001 +From 9409129a50f721937f0b16f00f6ba45e3b9d066a Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sun, 7 May 2017 13:32:25 -0600 -Subject: [PATCH 8/9] ARM: dove: enable ethernet on D3Plug +Subject: [PATCH 08/10] ARM: dove: enable ethernet on D3Plug Signed-off-by: Kevin Mihelich --- @@ -12,7 +12,7 @@ diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.d index 826026c28f90..a4c9963e1261 100644 --- a/arch/arm/boot/dts/dove-d3plug.dts +++ b/arch/arm/boot/dts/dove-d3plug.dts -@@ -61,6 +61,13 @@ +@@ -61,6 +61,13 @@ usb_power: regulator@1 { &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; &i2c0 { status = "okay"; }; @@ -27,5 +27,5 @@ index 826026c28f90..a4c9963e1261 100644 /* Samsung M8G2F eMMC */ &sdio0 { -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0008-drm-i915-save-AUD_FREQ_CNTRL-state-at-audio-domain-s.patch b/libre/linux-libre/0008-drm-i915-save-AUD_FREQ_CNTRL-state-at-audio-domain-s.patch deleted file mode 100644 index a1974ebb7..000000000 --- a/libre/linux-libre/0008-drm-i915-save-AUD_FREQ_CNTRL-state-at-audio-domain-s.patch +++ /dev/null @@ -1,87 +0,0 @@ -From ac55f63c14c1e7d0740c27d325e8abe40e2478b3 Mon Sep 17 00:00:00 2001 -From: Kai Vehmanen -Date: Fri, 20 Sep 2019 11:39:18 +0300 -Subject: [PATCH 08/14] drm/i915: save AUD_FREQ_CNTRL state at audio domain - suspend - -When audio power domain is suspended, the display driver must -save state of AUD_FREQ_CNTRL on Tiger Lake and Ice Lake -systems. The initial value of the register is set by BIOS and -is read by driver during the audio component init sequence. - -Cc: Jani Nikula -Cc: Imre Deak -Signed-off-by: Kai Vehmanen -Signed-off-by: Jani Nikula -Link: https://patchwork.freedesktop.org/patch/msgid/20190920083918.27057-1-kai.vehmanen@linux.intel.com ---- - drivers/gpu/drm/i915/display/intel_audio.c | 17 +++++++++++++++-- - drivers/gpu/drm/i915/i915_drv.h | 1 + - drivers/gpu/drm/i915/i915_reg.h | 2 ++ - 3 files changed, 18 insertions(+), 2 deletions(-) - -diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c -index ddcccf4408c3..439bc0a93410 100644 ---- a/drivers/gpu/drm/i915/display/intel_audio.c -+++ b/drivers/gpu/drm/i915/display/intel_audio.c -@@ -850,10 +850,17 @@ static unsigned long i915_audio_component_get_power(struct device *kdev) - - ret = intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); - -- /* Force CDCLK to 2*BCLK as long as we need audio to be powered. */ -- if (dev_priv->audio_power_refcount++ == 0) -+ if (dev_priv->audio_power_refcount++ == 0) { -+ if (IS_TIGERLAKE(dev_priv) || IS_ICELAKE(dev_priv)) { -+ I915_WRITE(AUD_FREQ_CNTRL, dev_priv->audio_freq_cntrl); -+ DRM_DEBUG_KMS("restored AUD_FREQ_CNTRL to 0x%x\n", -+ dev_priv->audio_freq_cntrl); -+ } -+ -+ /* Force CDCLK to 2*BCLK as long as we need audio powered. */ - if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) - glk_force_audio_cdclk(dev_priv, true); -+ } - - return ret; - } -@@ -1114,6 +1121,12 @@ static void i915_audio_component_init(struct drm_i915_private *dev_priv) - return; - } - -+ if (IS_TIGERLAKE(dev_priv) || IS_ICELAKE(dev_priv)) { -+ dev_priv->audio_freq_cntrl = I915_READ(AUD_FREQ_CNTRL); -+ DRM_DEBUG_KMS("init value of AUD_FREQ_CNTRL of 0x%x\n", -+ dev_priv->audio_freq_cntrl); -+ } -+ - dev_priv->audio_component_registered = true; - } - -diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h -index 89b6112bd66b..043ce1b47aeb 100644 ---- a/drivers/gpu/drm/i915/i915_drv.h -+++ b/drivers/gpu/drm/i915/i915_drv.h -@@ -1530,6 +1530,7 @@ struct drm_i915_private { - */ - struct mutex av_mutex; - int audio_power_refcount; -+ u32 audio_freq_cntrl; - - struct { - struct mutex mutex; -diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h -index 7b6e68f082f8..a99ef18665f2 100644 ---- a/drivers/gpu/drm/i915/i915_reg.h -+++ b/drivers/gpu/drm/i915/i915_reg.h -@@ -9110,6 +9110,8 @@ enum { - #define HSW_AUD_CHICKENBIT _MMIO(0x65f10) - #define SKL_AUD_CODEC_WAKE_SIGNAL (1 << 15) - -+#define AUD_FREQ_CNTRL _MMIO(0x65900) -+ - /* - * HSW - ICL power wells - * --- -2.25.0 - diff --git a/libre/linux-libre/0009-USB-Armory-MkII-support.patch b/libre/linux-libre/0009-USB-Armory-MkII-support.patch index 4c8f8fed3..bcb8556ce 100644 --- a/libre/linux-libre/0009-USB-Armory-MkII-support.patch +++ b/libre/linux-libre/0009-USB-Armory-MkII-support.patch @@ -1,7 +1,7 @@ -From 55e7015aa06dd943b55a0101beddae1c811a2be5 Mon Sep 17 00:00:00 2001 +From 9c5a1645cef4d1ba381db9c4b375b9dc900a4475 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich Date: Sun, 11 Aug 2019 12:34:17 -0600 -Subject: [PATCH 9/9] USB Armory MkII support +Subject: [PATCH 09/10] USB Armory MkII support --- arch/arm/boot/dts/Makefile | 2 + @@ -12,10 +12,10 @@ Subject: [PATCH 9/9] USB Armory MkII support create mode 100644 arch/arm/boot/dts/imx6ull-usbarmory.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index a0f92b9dbd7d..5d6e9f76f6db 100644 +index 9f10323ecfde..ab24e8e9d0c2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -580,9 +580,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ +@@ -585,10 +585,12 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ @@ -23,6 +23,7 @@ index a0f92b9dbd7d..5d6e9f76f6db 100644 imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-opos6uldev.dtb \ + imx6ull-usbarmory.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ @@ -551,5 +552,5 @@ index 000000000000..85cf30bff527 + status = "okay"; +}; -- -2.23.0 +2.25.0 diff --git a/libre/linux-libre/0009-drm-i915-Fix-audio-power-up-sequence-for-gen10-displ.patch b/libre/linux-libre/0009-drm-i915-Fix-audio-power-up-sequence-for-gen10-displ.patch deleted file mode 100644 index 774a5140f..000000000 --- a/libre/linux-libre/0009-drm-i915-Fix-audio-power-up-sequence-for-gen10-displ.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 77437dba84a29da0fdf62f9946416b6e53496b1d Mon Sep 17 00:00:00 2001 -From: Kai Vehmanen -Date: Thu, 3 Oct 2019 11:55:30 +0300 -Subject: [PATCH 09/14] drm/i915: Fix audio power up sequence for gen10+ - display - -On platfroms with gen10+ display, driver must set the enable bit of -AUDIO_PIN_BUF_CTL register before transactions with the HDA controller -can proceed. Add setting this bit to the audio power up sequence. - -Failing to do this resulted in errors during display audio codec probe, -and failures during resume from suspend. - -Note: We may also need to disable the bit afterwards, but there are -still unresolved issues with that. - -Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111214 -Signed-off-by: Kai Vehmanen -Signed-off-by: Jani Nikula -Link: https://patchwork.freedesktop.org/patch/msgid/20191003085531.30990-1-kai.vehmanen@linux.intel.com ---- - drivers/gpu/drm/i915/display/intel_audio.c | 5 +++++ - drivers/gpu/drm/i915/i915_reg.h | 2 ++ - 2 files changed, 7 insertions(+) - -diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c -index 439bc0a93410..440b33762fef 100644 ---- a/drivers/gpu/drm/i915/display/intel_audio.c -+++ b/drivers/gpu/drm/i915/display/intel_audio.c -@@ -860,6 +860,11 @@ static unsigned long i915_audio_component_get_power(struct device *kdev) - /* Force CDCLK to 2*BCLK as long as we need audio powered. */ - if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) - glk_force_audio_cdclk(dev_priv, true); -+ -+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) -+ I915_WRITE(AUD_PIN_BUF_CTL, -+ (I915_READ(AUD_PIN_BUF_CTL) | -+ AUD_PIN_BUF_ENABLE)); - } - - return ret; -diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h -index a99ef18665f2..1dd7b6187780 100644 ---- a/drivers/gpu/drm/i915/i915_reg.h -+++ b/drivers/gpu/drm/i915/i915_reg.h -@@ -9111,6 +9111,8 @@ enum { - #define SKL_AUD_CODEC_WAKE_SIGNAL (1 << 15) - - #define AUD_FREQ_CNTRL _MMIO(0x65900) -+#define AUD_PIN_BUF_CTL _MMIO(0x48414) -+#define AUD_PIN_BUF_ENABLE REG_BIT(31) - - /* - * HSW - ICL power wells --- -2.25.0 - diff --git a/libre/linux-libre/0010-Revert-ARM-8947-1-Fix-__arch_get_hw_counter-access-t.patch b/libre/linux-libre/0010-Revert-ARM-8947-1-Fix-__arch_get_hw_counter-access-t.patch new file mode 100644 index 000000000..8f3349acc --- /dev/null +++ b/libre/linux-libre/0010-Revert-ARM-8947-1-Fix-__arch_get_hw_counter-access-t.patch @@ -0,0 +1,28 @@ +From d8639dab6b5256a2f409da50a6ce73b9502a6823 Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich +Date: Sun, 2 Feb 2020 18:38:22 -0700 +Subject: [PATCH 10/10] Revert "ARM: 8947/1: Fix __arch_get_hw_counter() access + to CNTVCT" + +This reverts commit 04bb96427d4ee33fbdf15648ddf578c6ba1aef54. +--- + arch/arm/include/asm/vdso/gettimeofday.h | 3 --- + 1 file changed, 3 deletions(-) + +diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h +index 0ad2429c324f..5b879ae7afc1 100644 +--- a/arch/arm/include/asm/vdso/gettimeofday.h ++++ b/arch/arm/include/asm/vdso/gettimeofday.h +@@ -75,9 +75,6 @@ static __always_inline u64 __arch_get_hw_counter(int clock_mode) + #ifdef CONFIG_ARM_ARCH_TIMER + u64 cycle_now; + +- if (!clock_mode) +- return -EINVAL; +- + isb(); + cycle_now = read_sysreg(CNTVCT); + +-- +2.25.0 + diff --git a/libre/linux-libre/0010-drm-i915-extend-audio-CDCLK-2-BCLK-constraint-to-mor.patch b/libre/linux-libre/0010-drm-i915-extend-audio-CDCLK-2-BCLK-constraint-to-mor.patch deleted file mode 100644 index a5de71b1a..000000000 --- a/libre/linux-libre/0010-drm-i915-extend-audio-CDCLK-2-BCLK-constraint-to-mor.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 466961b7872771f84a86f2304197d303ed749925 Mon Sep 17 00:00:00 2001 -From: Kai Vehmanen -Date: Thu, 3 Oct 2019 11:55:31 +0300 -Subject: [PATCH 10/14] drm/i915: extend audio CDCLK>=2*BCLK constraint to more - platforms - -The CDCLK>=2*BCLK constraint applies to all generations since gen10. -Extend the constraint logic in audio get/put_power(). - -Signed-off-by: Kai Vehmanen -Signed-off-by: Jani Nikula -Link: https://patchwork.freedesktop.org/patch/msgid/20191003085531.30990-2-kai.vehmanen@linux.intel.com ---- - drivers/gpu/drm/i915/display/intel_audio.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c -index 440b33762fef..05ef43b13d1c 100644 ---- a/drivers/gpu/drm/i915/display/intel_audio.c -+++ b/drivers/gpu/drm/i915/display/intel_audio.c -@@ -858,7 +858,7 @@ static unsigned long i915_audio_component_get_power(struct device *kdev) - } - - /* Force CDCLK to 2*BCLK as long as we need audio powered. */ -- if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) -+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) - glk_force_audio_cdclk(dev_priv, true); - - if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) -@@ -877,7 +877,7 @@ static void i915_audio_component_put_power(struct device *kdev, - - /* Stop forcing CDCLK to 2*BCLK if no need for audio to be powered. */ - if (--dev_priv->audio_power_refcount == 0) -- if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) -+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) - glk_force_audio_cdclk(dev_priv, false); - - intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO, cookie); --- -2.25.0 - diff --git a/libre/linux-libre/0011-drm-i915-Limit-audio-CDCLK-2-BCLK-constraint-back-to.patch b/libre/linux-libre/0011-drm-i915-Limit-audio-CDCLK-2-BCLK-constraint-back-to.patch deleted file mode 100644 index 3b630cad4..000000000 --- a/libre/linux-libre/0011-drm-i915-Limit-audio-CDCLK-2-BCLK-constraint-back-to.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 238026166679e618b3bad1c86b0e37a43303b6b0 Mon Sep 17 00:00:00 2001 -From: Kai Vehmanen -Date: Tue, 31 Dec 2019 16:00:07 +0200 -Subject: [PATCH 11/14] drm/i915: Limit audio CDCLK>=2*BCLK constraint back to - GLK only - -Revert changes done in commit f6ec9483091f ("drm/i915: extend audio -CDCLK>=2*BCLK constraint to more platforms"). Audio drivers -communicate with i915 over HDA bus multiple times during system -boot-up and each of these transactions result in matching -get_power/put_power calls to i915, and depending on the platform, -a modeset change causing visible flicker. - -GLK is the only platform with minimum CDCLK significantly lower -than BCLK, and thus for GLK setting a higher CDCLK is mandatory. - -For other platforms, minimum CDCLK is close but below 2*BCLK -(e.g. on ICL, CDCLK=176.4kHz with BCLK=96kHz). Spec-wise the constraint -should be set, but in practise no communication errors have been -reported and the downside if set is the flicker observed at boot-time. - -Revert to old behaviour until better mechanism to manage -probe-time clocks is available. - -The full CDCLK>=2*BCLK constraint is still enforced at pipe -enable time in intel_crtc_compute_min_cdclk(). - -Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/913 -Fixes: f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") -Signed-off-by: Kai Vehmanen -Reviewed-by: Matt Roper -Signed-off-by: Matt Roper -Link: https://patchwork.freedesktop.org/patch/msgid/20191231140007.31728-1-kai.vehmanen@linux.intel.com -(cherry picked from commit 1ee48a61aa57dbdbc3cd2808d8b28df40d938e44) -Signed-off-by: Joonas Lahtinen ---- - drivers/gpu/drm/i915/display/intel_audio.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/drivers/gpu/drm/i915/display/intel_audio.c b/drivers/gpu/drm/i915/display/intel_audio.c -index 05ef43b13d1c..0cf475f3063c 100644 ---- a/drivers/gpu/drm/i915/display/intel_audio.c -+++ b/drivers/gpu/drm/i915/display/intel_audio.c -@@ -858,7 +858,7 @@ static unsigned long i915_audio_component_get_power(struct device *kdev) - } - - /* Force CDCLK to 2*BCLK as long as we need audio powered. */ -- if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) -+ if (IS_GEMINILAKE(dev_priv)) - glk_force_audio_cdclk(dev_priv, true); - - if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) -@@ -877,7 +877,7 @@ static void i915_audio_component_put_power(struct device *kdev, - - /* Stop forcing CDCLK to 2*BCLK if no need for audio to be powered. */ - if (--dev_priv->audio_power_refcount == 0) -- if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) -+ if (IS_GEMINILAKE(dev_priv)) - glk_force_audio_cdclk(dev_priv, false); - - intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO, cookie); --- -2.25.0 - diff --git a/libre/linux-libre/0012-pinctrl-sunrisepoint-Add-missing-Interrupt-Status-re.patch b/libre/linux-libre/0012-pinctrl-sunrisepoint-Add-missing-Interrupt-Status-re.patch deleted file mode 100644 index d4e85912f..000000000 --- a/libre/linux-libre/0012-pinctrl-sunrisepoint-Add-missing-Interrupt-Status-re.patch +++ /dev/null @@ -1,35 +0,0 @@ -From c7e2526442e1a92f2c875c0300935918a295f527 Mon Sep 17 00:00:00 2001 -From: Boyan Ding -Date: Wed, 1 Jan 2020 11:44:49 -0800 -Subject: [PATCH 12/14] pinctrl: sunrisepoint: Add missing Interrupt Status - register offset - -Commit 179e5a6114cc ("pinctrl: intel: Remove default Interrupt Status -offset") removes default interrupt status offset of GPIO controllers, -with previous commits explicitly providing the previously default -offsets. However, the is_offset value in SPTH_COMMUNITY is missing, -preventing related irq from being properly detected and handled. - -Fixes: f702e0b93cdb ("pinctrl: sunrisepoint: Provide Interrupt Status register offset") -Link: https://bugzilla.kernel.org/show_bug.cgi?id=205745 -Cc: stable@vger.kernel.org -Signed-off-by: Boyan Ding ---- - drivers/pinctrl/intel/pinctrl-sunrisepoint.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c -index 44d7f50bbc82..d936e7aa74c4 100644 ---- a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c -+++ b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c -@@ -49,6 +49,7 @@ - .padown_offset = SPT_PAD_OWN, \ - .padcfglock_offset = SPT_PADCFGLOCK, \ - .hostown_offset = SPT_HOSTSW_OWN, \ -+ .is_offset = SPT_GPI_IS, \ - .ie_offset = SPT_GPI_IE, \ - .pin_base = (s), \ - .npins = ((e) - (s) + 1), \ --- -2.25.0 - diff --git a/libre/linux-libre/0013-Revert-iwlwifi-mvm-fix-scan-config-command-size.patch b/libre/linux-libre/0013-Revert-iwlwifi-mvm-fix-scan-config-command-size.patch deleted file mode 100644 index ddf4d86a2..000000000 --- a/libre/linux-libre/0013-Revert-iwlwifi-mvm-fix-scan-config-command-size.patch +++ /dev/null @@ -1,48 +0,0 @@ -From ad6657302538790fdf5c0c0f6e88add139e0c530 Mon Sep 17 00:00:00 2001 -From: Mehmet Akif Tasova -Date: Mon, 30 Dec 2019 15:48:16 +0200 -Subject: [PATCH 13/14] Revert "iwlwifi: mvm: fix scan config command size" - -Since v5.4-rc1 was released, iwlwifi started throwing errors when scan -commands were sent to the firmware with certain devices (depending on -the OTP burned in the device, which contains the list of available -channels). For instance: - -iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD - -This bug was reported in the ArchLinux bug tracker: -https://bugs.archlinux.org/task/64703 - -And also in a specific case in bugzilla, when the lar_disabled option -was set: https://bugzilla.kernel.org/show_bug.cgi?id=205193 - -Revert the commit that introduced this error, by using the number of -channels from the OTP instead of the number of channels that is -specified in the FW TLV that tells us how many channels it supports. - -This reverts commit 06eb547c4ae4382e70d556ba213d13c95ca1801b. - -Cc: stable@vger.kernel.org # v5.4+ -Signed-off-by: Mehmet Akif Tasova -[ Luca: reworded the commit message a bit. ] -Signed-off-by: Luca Coelho ---- - drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c -index fcafa22ec6ce..8aa567d7912c 100644 ---- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c -+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c -@@ -1220,7 +1220,7 @@ static int iwl_mvm_legacy_config_scan(struct iwl_mvm *mvm) - cmd_size = sizeof(struct iwl_scan_config_v2); - else - cmd_size = sizeof(struct iwl_scan_config_v1); -- cmd_size += num_channels; -+ cmd_size += mvm->fw->ucode_capa.n_scan_channels; - - cfg = kzalloc(cmd_size, GFP_KERNEL); - if (!cfg) --- -2.25.0 - diff --git a/libre/linux-libre/0014-e1000e-Revert-e1000e-Make-watchdog-use-delayed-work.patch b/libre/linux-libre/0014-e1000e-Revert-e1000e-Make-watchdog-use-delayed-work.patch deleted file mode 100644 index bac757431..000000000 --- a/libre/linux-libre/0014-e1000e-Revert-e1000e-Make-watchdog-use-delayed-work.patch +++ /dev/null @@ -1,174 +0,0 @@ -From 22aa8417725e7b4cb467a78a6bce6f23ad799d98 Mon Sep 17 00:00:00 2001 -From: Jeff Kirsher -Date: Sat, 4 Jan 2020 23:29:22 -0800 -Subject: [PATCH 14/14] e1000e: Revert "e1000e: Make watchdog use delayed work" - -This reverts commit 59653e6497d16f7ac1d9db088f3959f57ee8c3db. - -This is due to this commit causing driver crashes and connections to -reset unexpectedly. - -Signed-off-by: Jeff Kirsher ---- - drivers/net/ethernet/intel/e1000e/e1000.h | 5 +- - drivers/net/ethernet/intel/e1000e/netdev.c | 54 ++++++++++------------ - 2 files changed, 27 insertions(+), 32 deletions(-) - -diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h -index 6c51b1bad8c4..37a2314d3e6b 100644 ---- a/drivers/net/ethernet/intel/e1000e/e1000.h -+++ b/drivers/net/ethernet/intel/e1000e/e1000.h -@@ -185,13 +185,12 @@ struct e1000_phy_regs { - - /* board specific private data structure */ - struct e1000_adapter { -+ struct timer_list watchdog_timer; - struct timer_list phy_info_timer; - struct timer_list blink_timer; - - struct work_struct reset_task; -- struct delayed_work watchdog_task; -- -- struct workqueue_struct *e1000_workqueue; -+ struct work_struct watchdog_task; - - const struct e1000_info *ei; - -diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c -index d7d56e42a6aa..060daf66bf63 100644 ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -1780,8 +1780,7 @@ static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data) - } - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->state)) -- mod_delayed_work(adapter->e1000_workqueue, -- &adapter->watchdog_task, HZ); -+ mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - - /* Reset on uncorrectable ECC error */ -@@ -1861,8 +1860,7 @@ static irqreturn_t e1000_intr(int __always_unused irq, void *data) - } - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->state)) -- mod_delayed_work(adapter->e1000_workqueue, -- &adapter->watchdog_task, HZ); -+ mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - - /* Reset on uncorrectable ECC error */ -@@ -1907,8 +1905,7 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) - hw->mac.get_link_status = true; - /* guard against interrupt when we're going down */ - if (!test_bit(__E1000_DOWN, &adapter->state)) -- mod_delayed_work(adapter->e1000_workqueue, -- &adapter->watchdog_task, HZ); -+ mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - - if (!test_bit(__E1000_DOWN, &adapter->state)) -@@ -4281,6 +4278,7 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) - - napi_synchronize(&adapter->napi); - -+ del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_info_timer); - - spin_lock(&adapter->stats64_lock); -@@ -5152,11 +5150,25 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) - } - } - -+/** -+ * e1000_watchdog - Timer Call-back -+ * @data: pointer to adapter cast into an unsigned long -+ **/ -+static void e1000_watchdog(struct timer_list *t) -+{ -+ struct e1000_adapter *adapter = from_timer(adapter, t, watchdog_timer); -+ -+ /* Do the rest outside of interrupt context */ -+ schedule_work(&adapter->watchdog_task); -+ -+ /* TODO: make this use queue_delayed_work() */ -+} -+ - static void e1000_watchdog_task(struct work_struct *work) - { - struct e1000_adapter *adapter = container_of(work, - struct e1000_adapter, -- watchdog_task.work); -+ watchdog_task); - struct net_device *netdev = adapter->netdev; - struct e1000_mac_info *mac = &adapter->hw.mac; - struct e1000_phy_info *phy = &adapter->hw.phy; -@@ -5404,9 +5416,8 @@ static void e1000_watchdog_task(struct work_struct *work) - - /* Reset the timer */ - if (!test_bit(__E1000_DOWN, &adapter->state)) -- queue_delayed_work(adapter->e1000_workqueue, -- &adapter->watchdog_task, -- round_jiffies(2 * HZ)); -+ mod_timer(&adapter->watchdog_timer, -+ round_jiffies(jiffies + 2 * HZ)); - } - - #define E1000_TX_FLAGS_CSUM 0x00000001 -@@ -7259,21 +7270,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) - goto err_eeprom; - } - -- adapter->e1000_workqueue = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0, -- e1000e_driver_name); -- -- if (!adapter->e1000_workqueue) { -- err = -ENOMEM; -- goto err_workqueue; -- } -- -- INIT_DELAYED_WORK(&adapter->watchdog_task, e1000_watchdog_task); -- queue_delayed_work(adapter->e1000_workqueue, &adapter->watchdog_task, -- 0); -- -+ timer_setup(&adapter->watchdog_timer, e1000_watchdog, 0); - timer_setup(&adapter->phy_info_timer, e1000_update_phy_info, 0); - - INIT_WORK(&adapter->reset_task, e1000_reset_task); -+ INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); - INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); - INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); - INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang); -@@ -7367,9 +7368,6 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) - return 0; - - err_register: -- flush_workqueue(adapter->e1000_workqueue); -- destroy_workqueue(adapter->e1000_workqueue); --err_workqueue: - if (!(adapter->flags & FLAG_HAS_AMT)) - e1000e_release_hw_control(adapter); - err_eeprom: -@@ -7416,17 +7414,15 @@ static void e1000_remove(struct pci_dev *pdev) - */ - if (!down) - set_bit(__E1000_DOWN, &adapter->state); -+ del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->phy_info_timer); - - cancel_work_sync(&adapter->reset_task); -+ cancel_work_sync(&adapter->watchdog_task); - cancel_work_sync(&adapter->downshift_task); - cancel_work_sync(&adapter->update_phy_task); - cancel_work_sync(&adapter->print_hang_task); - -- cancel_delayed_work(&adapter->watchdog_task); -- flush_workqueue(adapter->e1000_workqueue); -- destroy_workqueue(adapter->e1000_workqueue); -- - if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) { - cancel_work_sync(&adapter->tx_hwtstamp_work); - if (adapter->tx_hwtstamp_skb) { --- -2.25.0 - diff --git a/libre/linux-libre/PKGBUILD b/libre/linux-libre/PKGBUILD index 87c5f991b..354a1c9e0 100644 --- a/libre/linux-libre/PKGBUILD +++ b/libre/linux-libre/PKGBUILD @@ -14,11 +14,11 @@ _replacesoldkernels=() # '%' gets replaced with kernel suffix _replacesoldmodules=() # '%' gets replaced with kernel suffix pkgbase=linux-libre -pkgver=5.4.12 +pkgver=5.5.1 pkgrel=1 pkgdesc='Linux-libre' -rcnver=5.4.12 -rcnrel=armv7-x14 +rcnver=5.5.1 +rcnrel=armv7-x6 url='https://linux-libre.fsfla.org/' arch=(i686 x86_64 armv7h) license=(GPL2) @@ -28,7 +28,7 @@ makedepends=( ) makedepends_armv7h=(uboot-tools vboot-utils dtc) # required by linux-libre-chromebook options=('!strip') -_srcname=linux-5.4 +_srcname=linux-5.5 source=( "https://linux-libre.fsfla.org/pub/linux-libre/releases/${_srcname##*-}-gnu/linux-libre-${_srcname##*-}-gnu.tar.xz"{,.sign} "https://linux-libre.fsfla.org/pub/linux-libre/releases/$pkgver-gnu/patch-${_srcname##*-}-gnu-$pkgver-gnu.xz"{,.sign} @@ -46,19 +46,8 @@ source=( 0002-fix-Atmel-maXTouch-touchscreen-support.patch # extracted patches from Arch Linux kernel sources 0001-ZEN-Add-sysctl-and-CONFIG-to-disallow-unprivileged-C.patch - 0002-lib-devres-add-a-helper-function-for-ioremap_uc.patch - 0003-mfd-intel-lpss-Use-devm_ioremap_uc-for-MMIO.patch - 0004-PCI-pciehp-Do-not-disable-interrupt-twice-on-suspend.patch - 0005-PCI-pciehp-Prevent-deadlock-on-disconnect.patch - 0006-ACPI-PM-s2idle-Rework-ACPI-events-synchronization.patch - 0007-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch - 0008-drm-i915-save-AUD_FREQ_CNTRL-state-at-audio-domain-s.patch - 0009-drm-i915-Fix-audio-power-up-sequence-for-gen10-displ.patch - 0010-drm-i915-extend-audio-CDCLK-2-BCLK-constraint-to-mor.patch - 0011-drm-i915-Limit-audio-CDCLK-2-BCLK-constraint-back-to.patch - 0012-pinctrl-sunrisepoint-Add-missing-Interrupt-Status-re.patch - 0013-Revert-iwlwifi-mvm-fix-scan-config-command-size.patch - 0014-e1000e-Revert-e1000e-Make-watchdog-use-delayed-work.patch + 0002-iwlwifi-pcie-restore-support-for-Killer-Qu-C0-NICs.patch + 0003-Btrfs-send-fix-emission-of-invalid-clone-operations-.patch ) source_armv7h=( # RCN patch (CM3 firmware deblobbed and bloatware removed) @@ -73,6 +62,7 @@ source_armv7h=( 0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch 0008-ARM-dove-enable-ethernet-on-D3Plug.patch 0009-USB-Armory-MkII-support.patch + 0010-Revert-ARM-8947-1-Fix-__arch_get_hw_counter-access-t.patch # ChromiumOS patches 0001-CHROMIUM-block-partitions-efi-Add-support-for-IGNORE.patch ) @@ -80,9 +70,9 @@ validpgpkeys=( '474402C8C582DAFBE389C427BCB7CF877E7D47A7' # Alexandre Oliva '6DB9C4B4F0D8C0DC432CF6E4227CA7C556B2BA78' # David P. ) -sha512sums=('0d0915133864eb031adfc6700066147dcf3e768a50a31c39754950c95ef4fd322dc701cd50af49c403ef0325adfcb07e354d5e46c1be3dcdd719a7a55c963f37' +sha512sums=('187368a8fb4e04acfd7d18a024d6cdbc2841bcc06dcfbc3a053706e8512c3e3f573755228347c11bd791b296ec60eb2d67d5075ece2aef234a847e72f2b3e746' 'SKIP' - '9d2311e9bebc81dbd2032dd87a9f64290bd3a406701a7a83785897230c0cdc679e75fb8b5b4dc0b9bb54f5105d3101f7fcda4296a14e62f026d4882361447e1c' + '21b0beeff566b1201b3411344af0d10ab543a575652ec4841ee195244b52c68c145f536a5577d782a00fbd43bbfa7f113385eda1200a52681005bf0c8ecff92c' 'SKIP' '13cb5bc42542e7b8bb104d5f68253f6609e463b6799800418af33eb0272cc269aaa36163c3e6f0aacbdaaa1d05e2827a4a7c4a08a029238439ed08b89c564bb3' 'SKIP' @@ -91,39 +81,29 @@ sha512sums=('0d0915133864eb031adfc6700066147dcf3e768a50a31c39754950c95ef4fd322dc '267295aa0cea65684968420c68b32f1a66a22d018b9d2b2c1ef14267bcf4cb68aaf7099d073cbfefe6c25c8608bdcbbd45f7ac8893fdcecbf1e621abdfe9ecc1' 'SKIP' '4f0c8068f2532a60f3368ecc2147f6c33b19f934540655390751629b0981b1bf208f2ec563f5fcfbcf3537140bafd9ed0993cdc8f5b0b71914939d601afc4c29' - 'a923bb36ff24d3f2326b0b6bccb8cdfe2ed2ab2acdae17dfcaf9beb269995a52bfba751ad7e616544ef4b98dd9487a66fe04dae2ec2e7d724f8ac47382ee71bd' - '32590362aa544dd14bae48e24e2ffa979f2ea3cd80f0bf776126002860798a8dace8413bb19545f50af4b94dbf16ba5821780cbcdd19e10c7cfc2e4d0412eb30' + 'd2049a78d4802f099e43e111bc76d8bb3948b7bce8daa1fec33964ca9faabc0aa5327847bd666ec89221d9dcb37fae944f72c203a8d41b175023d085d7a849c8' + '8f26d9d2161bad45fbd5b5c7db31af7bbbbc0295b87da645179bf5f777362c49cf296fa8e55d976a41f7f68868b55469787967413c7a68278dec6f7181e5e1da' 'f01e7925b262d2874a8a991b1f27d057356a2a384d2012b61be5a631d4e4d7cf87461c8fb9e7f183831f5a829ad204897f1f0545a52df6288a0e04a5c2e31b96' '167bc73c6c1c63931806238905dc44c7d87c5a5c0f6293159f2133dfe717fb44081018d810675716d1605ec7dff5e8333b87b19e09e2de21d0448e447437873b' 'bb6718984a7357c9b00c37e4788480e5b8b75018c172ecc1441bc3fc5d2d42444eb5d8c7f9d2e3a7d6fed6d03acb565e3c0559486e494c40a7fe6bd0570c9ede' '143dea30c6da00e504c99984a98a0eb2411f558fcdd9dfa7f607d6c14e9e7dffff9cb00121d9317044b07e3e210808286598c785ee854084b993ec9cb14d8232' '02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af' 'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168' - '5c12036749138b026f299b44d4968507d265ca5182c9cd975669f9810e344b9786b787b9dd9eba310f1c480b6f856ba9a3a557ec94e313ea716cffe1e588f7b5' - '757182970d98ed04aec3d82fdde30787812ae5c0c4217a85be1a3c3d90ccfd7afe70b42a340859be517d52ab41357c12d50f46ef49701ab9673d3240969b0799' - 'f224e185269d51fb8bbe2d8148567303f39d1216afc7d5f446be07601a6d969682051880903d4d61c917fa75ecf38a557c7b383217bb064577e369f096422843' - '061ddb48a6d574c80ec75ac686bface0f88e8e81586c36e32ac6493ba5fe9d5d4877dbb4709d3e29758adfebb9b6fe3ed0899d5a31af550d99fca5c4d6128a41' - 'cbb6e8f92c2878ed89646667cfa54b0ebf73c426c09e3a5a9a5ed5aaf68e94364d85a589f5348c10fb3e90adb978e022ce9e7b541e64eb411bdf94ed00871f8e' - 'd60a380b494c7d80f6b379a2c74f50d33251598c2c1fdf2019fd602e51f25541726cf81485eeab02b983f56ac71c751dd54471ead05c22a339b0e6589f4675fe' - '924a5eaed5f3d51dc9f983f7b941a11a3773bab5f686d211729b855e24dd70fa1637a8483230e3b326545d362ff09c8b07e6373ea52f79848c8d47eb27edbb3a' - '5643a9ca7b397628dc5705a28411e8a9572da9ad981e6737957b0f172a9165801633a55d10f44d81e156daccc84732ba472982c644e6e0ca091087be6086e5b6' - '48feeee39792d80702097caf463351f30b5084c76d2baafd0b0879889dadd078eb0d9f068dfc18dc5e39630ac90c726b5b496bb7f40873e541771a00e2995a01' - '21f258f366335867235432bc27e222fc6033007a7e36a0ec8f7b3d9868a7c1b84da48390749e9fcff5c2cb2ad2a4d3661de21638d5fbb557711eafb8bf6ab37a' - '2230b605ae5a9e16d98992e585590efc02684dbce1f7f310174610430cc817f69fa318ed97d066241a763a6f9a28a3b9702017ca88bb97e18b405f7ee1ec3e00' - 'caea78d02fafd04334f6005a6974307e42bb808f813c9f2fe9ee4195288c77c3c1454707d1e49dfd22d6d83e53d5b8d5100de6a7537aa80425dd3a3128aee1ca' - 'a92f15fe8e0bf10c390f252197421a268f14601f35887d4d1d87b9e597feae39b9819c955be885a62cf7a882c0080f780cdfde08a2c5efc7fdd88512c0629d4d' - '4be4ea402a7c8db3ee19aab613138edc47834861261c2ba9e5efc4162a569352dd0ef111bc3933c0f7de477dac1524111f35ae850ff0ee1c9d37cd70702ba68b') -sha512sums_armv7h=('a9728939fc256c7d74c777b5cd5c7971efb6b43161667a39ee00cda66e3973faf63c2cdd6ad606722b3e5686eb9243d67eb48a931319dbfb99fe74fb88f06c64' + '3879f0d92e5a3e26386e687aaa376213e5064e2a23100baa2c6510cff357cb7c32eae700c5313a93b0881f0f40bfc224f4fa08c503a256d2bd64ef0ff6dcb2f3' + '902a591813240e08f24ce45a0de7d5911e1364b092f5bbc5a3ce7616c4fced4cad8adfa448f864540d3e11d21f651f51ee67810dec0e75ed3b41c3666da73423' + '701fb8ffb75c7469e9b0cbdd046ba122e4c5129ba6d78590e161084c09cbbe66b3c2b13191967db8c61942de6bad666d156ab1842672690b2e801aa398c05805') +sha512sums_armv7h=('999d5e44c19bd1cfdc8adfe63165edb358266be290fe1b4cd32385a320cd2f012447aefd71f016ccf3152f47a91787b413a360d20262ebb7aae8a88dc1436184' 'SKIP' - 'b576a9c40ba59485c350f71b9234d9e71f245e25b26382bd2f67019f3309c3b5705a6020eae0a9dfccacc763fb2056a5937c0a8ff4e64f99ba1d60f0b2acb03f' - '85a13a274d4cbaca3ddbe8eaf883f1a1184765f8d09d6d40bb32defbe0876cb0153513e8db8671d7fc053e383ced793b74245ff29364a760e1a52bb36ebc8e85' - 'f9ce0bb4f06be6f742d8a31384e90fdab1a4686f14d5a8845e0c341dcfa62ae59db933237174223de9b32f9d91f99125c20ede7dff664755f1d42ea0cecdefdb' - 'b32623904f984118ebdd8ec31816885d73776ed80a68fa23925e67451f28a8f080dd8545307bb2f857435894adfa8b3db7c8a99aa02b8b3f2b5f8e3223d98a47' - 'd114f1e69504413e81dd67684f5b1ce69aa09d5bc768c7eee96a7d6b7ec47b32cd8f02593c878b0e9091475467de36a3d7c478e34a39148fa849548f53637b84' - 'bc0c6b1726679498393be8d4c417c62e1f356fe5c617c71ff23532652fdd5f314e5bfc6172eaca79cd4806b81031bf2f879d7d1a6050ad4c616c04e6bdf93c2a' - 'b13bea6412580325dba0d02cf0dc712e860f659569ffcb968aa4836fdb2882448cfee4659a675a70affccae02c8d2589d80b7239eef5ae7b615162aeaa76f3bb' - 'cff59f974651614587313674455a968ae5390a5ca825d204f0e2f8de2b422d577b007f5297a398e2afeb33ed0d324d34ad58ff4cd56e645bd4ca9a6bdc1354c5' - '54adbec4b6b85cda901df7d2b3eb1f517f10d3528326e60c7afa4b49ccc7cfb43b0d1f574ceb5d7d03c94a0fbcc97c0ef785258292dd26ed46728355da27332c' + '4ad93d447d8671402dd7a2886b5c1329ffd5dd7b7f87e895f792ae937258c5016c7c0512ad03c4065da7520e656d0764d565171be463a378320fb210b54e3dee' + '780e4ce45b35b271dd3459b543681603c1f112f68d5f3500b7c01fdcac205a9d06e9ec13700e8841d4beb831e3e2dda1664a0ac38ef23bb5a47e2df0534767d7' + '7b5faabd9f4a766f92a285857ff750eff4ae08abb8435483ca5bc9a38c4852d373a960ed272ea35b6a055c7ca53d2f3ff869023f91b9dcd0c5adac912c16b109' + '1a75ee9c6a51a95f39a6cbe5b27c034b239dad232961033df0ce9ce01dea8aaa3aa819a0a6b724a468bee8b275f2d7c8a5c56992f3237a18c19cd8ecb3a930e8' + '42e8fa85e9aee0624a120c1260c187b6402d48334dc5db78f753ce5c4edab6d2f8c3d0bfcd65e8fc638c448c7a0ddec9c4f0f9fc6236651c30a5eba1d092453c' + '13e3f21591cd0952d0c29e99998edad4a594225007d3fbb2486a92c235f85246b68030dfb5d5d427cfc82627f85d60dd561add8dcc5570e431706394c14145a0' + 'e253bc19cd306a7b435d507761f3534677136c448885e7b6bf92b5bb28e79e2aad794a0e0b0874828a75146cbeb8586df7ab052effafb8484747c4d4d43f89a4' + 'a8203472a924b720c9f4d8eb05976028cf3ca1e595fddee1801f7594c0bef00b1cd788410b5f8fa28ee2d6ebf1403b6052334f777c53fce0b8958e8e66931d98' + 'dfdd22d4cb803e7dd3fd3455689147c5441392001d8695993f5e7dcad02ff0b4846dd6c53a1fdb67134022ef77e6433c52d38cbbbaccb9d9d849acb8d19c854e' + 'b1eb6025017cb5d73d330e3bf304252c8ec4ae607350d358cc2a78ac765982dec6029b94e85966c34f015d50a39e639caf27c5907bc8dd1a36a5e1f9de206f7f' '7bda2ad7eb81af802873cb6764cb9c675ec50ceeb5adc487881ebc8c316cf55f836e56c2cc67494a2920e86494861db2eb924b7ff9b151ae3c5b0e493c373bf9') _replacesarchkernel=("${_replacesarchkernel[@]/\%/${pkgbase#linux-libre}}") @@ -143,15 +123,15 @@ prepare() { cd $_srcname if [ "${_srcname##*-}" != "$pkgver" ]; then - msg2 "Applying upstream patch..." + echo "Applying upstream patch..." patch -Np1 < "../patch-${_srcname##*-}-gnu-$pkgver-gnu" fi - msg2 "Adding freedo as boot logo..." + echo "Adding freedo as boot logo..." install -m644 -t drivers/video/logo \ ../logo_linux_{clut224.ppm,vga16.ppm,mono.pbm} - msg2 "Setting version..." + echo "Setting version..." scripts/setlocalversion --save-scmversion echo "-$pkgrel" > localversion.10-pkgrel echo "${pkgbase#linux-libre}" > localversion.20-pkgname @@ -162,7 +142,7 @@ prepare() { src_armv7h="${src_armv7h%%::*}" src_armv7h="${src_armv7h##*/}" [[ $src_armv7h = *.patch ]] || continue - msg2 "Applying patch $src_armv7h..." + echo "Applying patch $src_armv7h..." patch -Np1 < "../$src_armv7h" done fi @@ -172,16 +152,16 @@ prepare() { src="${src%%::*}" src="${src##*/}" [[ $src = *.patch ]] || continue - msg2 "Applying patch $src..." + echo "Applying patch $src..." patch -Np1 < "../$src" done - msg2 "Setting config..." + echo "Setting config..." cp ../config.$CARCH .config make olddefconfig make -s kernelrelease > version - msg2 "Prepared %s version %s" "$pkgbase" "$( cmdline - msg2 "Creating kernel sign..." + echo "Creating kernel sign..." vbutil_kernel \ --pack vmlinux.kpart \ --version 1 \ @@ -389,7 +369,7 @@ _package-chromebook() { --config cmdline \ --bootloader bootloader.bin - msg2 "Installing kernel sign..." + echo "Installing kernel sign..." mkdir -p "$pkgdir/boot" cp vmlinux.kpart "$pkgdir/boot" } diff --git a/libre/linux-libre/config.armv7h b/libre/linux-libre/config.armv7h index 712cc0e32..0e6a07cba 100644 --- a/libre/linux-libre/config.armv7h +++ b/libre/linux-libre/config.armv7h @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 5.4.12-gnu Kernel Configuration +# Linux/arm 5.5.1-gnu Kernel Configuration # # @@ -20,7 +20,6 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y # CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_COMPILE_TEST is not set -# CONFIG_HEADER_TEST is not set CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_BUILD_SALT="" @@ -187,7 +186,6 @@ CONFIG_UID16=y CONFIG_MULTIUSER=y # CONFIG_SGETMASK_SYSCALL is not set # CONFIG_SYSFS_SYSCALL is not set -# CONFIG_SYSCTL_SYSCALL is not set CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y @@ -257,6 +255,7 @@ CONFIG_ARCH_HAS_BANDGAP=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_FIQ=y CONFIG_ARM_PATCH_PHYS_VIRT=y @@ -685,7 +684,6 @@ CONFIG_CPUFREQ_DT_PLATDEV=y CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m # CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set # CONFIG_ARM_ARMADA_8K_CPUFREQ is not set -CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_ARM_IMX_CPUFREQ_DT=y @@ -804,7 +802,9 @@ CONFIG_CRYPTO_AES_ARM_BS=m # CONFIG_CRYPTO_CRCT10DIF_ARM_CE is not set # CONFIG_CRYPTO_CRC32_ARM_CE is not set CONFIG_CRYPTO_CHACHA20_NEON=m +CONFIG_CRYPTO_POLY1305_ARM=m CONFIG_CRYPTO_NHPOLY1305_NEON=m +CONFIG_CRYPTO_CURVE25519_NEON=m CONFIG_VIRTUALIZATION=y # CONFIG_VHOST_NET is not set # CONFIG_VHOST_SCSI is not set @@ -862,10 +862,10 @@ CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=8 CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y +CONFIG_HAVE_COPY_THREAD_TLS=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y -CONFIG_64BIT_TIME=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y @@ -874,7 +874,6 @@ CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_REFCOUNT_FULL=y # CONFIG_LOCK_EVENT_COUNTS is not set # @@ -887,14 +886,9 @@ CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y CONFIG_PLUGIN_HOSTCC="g++" CONFIG_HAVE_GCC_PLUGINS=y CONFIG_GCC_PLUGINS=y - -# -# GCC plugins -# # CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set # CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set # CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -# end of GCC plugins # end of General architecture-dependent options CONFIG_RT_MUTEXES=y @@ -914,6 +908,7 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y @@ -1047,6 +1042,7 @@ CONFIG_UNIX_SCM=y CONFIG_UNIX_DIAG=m CONFIG_TLS=m # CONFIG_TLS_DEVICE is not set +# CONFIG_TLS_TOE is not set CONFIG_XFRM=y CONFIG_XFRM_OFFLOAD=y CONFIG_XFRM_ALGO=m @@ -1536,6 +1532,7 @@ CONFIG_RDS_TCP=m # CONFIG_RDS_DEBUG is not set CONFIG_TIPC=m CONFIG_TIPC_MEDIA_UDP=y +CONFIG_TIPC_CRYPTO=y CONFIG_TIPC_DIAG=m CONFIG_ATM=m CONFIG_ATM_CLIP=m @@ -1557,7 +1554,6 @@ CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_HAVE_NET_DSA=y CONFIG_NET_DSA=m -# CONFIG_NET_DSA_TAG_8021Q is not set CONFIG_NET_DSA_TAG_BRCM_COMMON=m CONFIG_NET_DSA_TAG_BRCM=m CONFIG_NET_DSA_TAG_BRCM_PREPEND=m @@ -1566,6 +1562,7 @@ CONFIG_NET_DSA_TAG_DSA=m CONFIG_NET_DSA_TAG_EDSA=m # CONFIG_NET_DSA_TAG_MTK is not set # CONFIG_NET_DSA_TAG_KSZ is not set +# CONFIG_NET_DSA_TAG_OCELOT is not set # CONFIG_NET_DSA_TAG_QCA is not set # CONFIG_NET_DSA_TAG_LAN9303 is not set # CONFIG_NET_DSA_TAG_SJA1105 is not set @@ -1947,6 +1944,7 @@ CONFIG_NFC_PN544_I2C=m CONFIG_NFC_PN533=m CONFIG_NFC_PN533_USB=m CONFIG_NFC_PN533_I2C=m +# CONFIG_NFC_PN532_UART is not set CONFIG_NFC_MICROREAD=m CONFIG_NFC_MICROREAD_I2C=m CONFIG_NFC_MRVL=m @@ -1993,7 +1991,6 @@ CONFIG_PCIEAER=y CONFIG_PCIEAER_INJECT=m # CONFIG_PCIE_ECRC is not set CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set @@ -2018,13 +2015,6 @@ CONFIG_PCI_BRIDGE_EMUL=y # PCI controller drivers # CONFIG_PCI_MVEBU=y - -# -# Cadence PCIe controllers support -# -# CONFIG_PCIE_CADENCE_HOST is not set -# end of Cadence PCIe controllers support - # CONFIG_PCI_FTPCI100 is not set CONFIG_PCI_TEGRA=y CONFIG_PCI_HOST_COMMON=y @@ -2050,6 +2040,12 @@ CONFIG_PCI_KEYSTONE_HOST=y # CONFIG_PCIE_ARMADA_8K is not set # CONFIG_PCI_MESON is not set # end of DesignWare PCI Core Support + +# +# Cadence PCIe controllers support +# +# CONFIG_PCIE_CADENCE_PLAT_HOST is not set +# end of Cadence PCIe controllers support # end of PCI controller drivers # @@ -2085,6 +2081,7 @@ CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set # CONFIG_FW_LOADER_COMPRESS is not set +CONFIG_FW_CACHE=y # end of Firmware loader CONFIG_WANT_DEV_COREDUMP=y @@ -2203,6 +2200,7 @@ CONFIG_MTD_PHYSMAP=m CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PHYSMAP_VERSATILE is not set # CONFIG_MTD_PHYSMAP_GEMINI is not set +# CONFIG_MTD_PHYSMAP_IXP4XX is not set # CONFIG_MTD_IMPA7 is not set CONFIG_MTD_INTEL_VR_NOR=m CONFIG_MTD_PLATRAM=m @@ -2263,6 +2261,7 @@ CONFIG_MTD_NAND_SUNXI=y # CONFIG_MTD_NAND_MESON is not set # CONFIG_MTD_NAND_GPIO is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_CADENCE is not set # # Misc @@ -2339,6 +2338,7 @@ CONFIG_BLK_DEV_RBD=m CONFIG_NVME_CORE=m CONFIG_BLK_DEV_NVME=m # CONFIG_NVME_MULTIPATH is not set +# CONFIG_NVME_HWMON is not set # CONFIG_NVME_FC is not set # CONFIG_NVME_TCP is not set # CONFIG_NVME_TARGET is not set @@ -2406,39 +2406,7 @@ CONFIG_ALTERA_STAPL=m # # Intel MIC & related support # - -# -# Intel MIC Bus Driver -# - -# -# SCIF Bus Driver -# - -# -# VOP Bus Driver -# # CONFIG_VOP_BUS is not set - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# - -# -# SCIF Driver -# - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# - -# -# VOP Driver -# # end of Intel MIC & related support CONFIG_BEAGLEBONE_PINMUX_HELPER=m @@ -2788,10 +2756,6 @@ CONFIG_ATM_FORE200E_DEBUG=0 # CONFIG_ATM_HE is not set CONFIG_ATM_SOLOS=m -# -# CAIF transport drivers -# - # # Distributed Switch Architecture drivers # @@ -2811,6 +2775,7 @@ CONFIG_NET_DSA_MV88E6060=m CONFIG_NET_DSA_MV88E6XXX=m CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y CONFIG_NET_DSA_MV88E6XXX_PTP=y +# CONFIG_NET_DSA_MSCC_FELIX is not set # CONFIG_NET_DSA_SJA1105 is not set # CONFIG_NET_DSA_QCA8K is not set # CONFIG_NET_DSA_REALTEK_SMI is not set @@ -2930,8 +2895,6 @@ CONFIG_NET_VENDOR_HISILICON=y # CONFIG_HNS_DSAF is not set # CONFIG_HNS_ENET is not set # CONFIG_HNS3 is not set -CONFIG_NET_VENDOR_HP=y -# CONFIG_HP100 is not set CONFIG_NET_VENDOR_HUAWEI=y CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_INTEL=y @@ -3096,6 +3059,7 @@ CONFIG_TI_DAVINCI_EMAC=y CONFIG_TI_DAVINCI_MDIO=y CONFIG_TI_CPSW_PHY_SEL=y CONFIG_TI_CPSW=y +# CONFIG_TI_CPSW_SWITCHDEV is not set CONFIG_TI_CPTS=y CONFIG_TI_CPTS_MOD=y CONFIG_TLAN=m @@ -3143,7 +3107,6 @@ CONFIG_SFP=m CONFIG_AMD_PHY=m CONFIG_AQUANTIA_PHY=m # CONFIG_AX88796B_PHY is not set -CONFIG_AT803X_PHY=m CONFIG_BCM7XXX_PHY=m CONFIG_BCM87XX_PHY=m CONFIG_BCM_NET_PHYLIB=m @@ -3155,6 +3118,7 @@ CONFIG_DAVICOM_PHY=m # CONFIG_DP83TC811_PHY is not set CONFIG_DP83848_PHY=m CONFIG_DP83867_PHY=m +# CONFIG_DP83869_PHY is not set CONFIG_FIXED_PHY=y CONFIG_ICPLUS_PHY=m # CONFIG_INTEL_XWAY_PHY is not set @@ -3169,6 +3133,7 @@ CONFIG_MICROCHIP_PHY=y # CONFIG_MICROSEMI_PHY is not set CONFIG_NATIONAL_PHY=m # CONFIG_NXP_TJA11XX_PHY is not set +CONFIG_AT803X_PHY=y CONFIG_QSEMI_PHY=m CONFIG_REALTEK_PHY=m # CONFIG_RENESAS_PHY is not set @@ -3708,7 +3673,6 @@ CONFIG_INPUT_GPIO_DECODER=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_KXTJ9=m -CONFIG_INPUT_KXTJ9_POLLED_MODE=y CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m @@ -4096,6 +4060,7 @@ CONFIG_PTP_1588_CLOCK_QORIQ=m # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # +# CONFIG_PTP_1588_CLOCK_IDTCM is not set # end of PTP clock support CONFIG_PINCTRL=y @@ -4171,6 +4136,7 @@ CONFIG_PINCTRL_MESON=y CONFIG_PINCTRL_MESON8=y CONFIG_PINCTRL_MESON8B=y CONFIG_PINCTRL_MESON8_PMX=y +# CONFIG_PINCTRL_EQUILIBRIUM is not set CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 @@ -4300,6 +4266,7 @@ CONFIG_W1_SLAVE_DS2413=m CONFIG_W1_SLAVE_DS2406=m CONFIG_W1_SLAVE_DS2423=m # CONFIG_W1_SLAVE_DS2805 is not set +# CONFIG_W1_SLAVE_DS2430 is not set CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set @@ -4435,6 +4402,8 @@ CONFIG_SENSORS_JC42=m CONFIG_SENSORS_POWR1220=m CONFIG_SENSORS_LINEAGE=m CONFIG_SENSORS_LTC2945=m +# CONFIG_SENSORS_LTC2947_I2C is not set +# CONFIG_SENSORS_LTC2947_SPI is not set CONFIG_SENSORS_LTC2990=m CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m @@ -4486,6 +4455,7 @@ CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m +# CONFIG_SENSORS_BEL_PFE is not set # CONFIG_SENSORS_IBM_CFFPS is not set CONFIG_SENSORS_INSPUR_IPSPS=m CONFIG_SENSORS_IR35221=m @@ -4540,6 +4510,7 @@ CONFIG_SENSORS_TMP103=m CONFIG_SENSORS_TMP108=m CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m +# CONFIG_SENSORS_TMP513 is not set CONFIG_SENSORS_VEXPRESS=y # CONFIG_SENSORS_VIA686A is not set CONFIG_SENSORS_VT1211=m @@ -4564,7 +4535,6 @@ CONFIG_THERMAL_OF=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y @@ -4580,6 +4550,7 @@ CONFIG_IMX_THERMAL=y CONFIG_ROCKCHIP_THERMAL=y CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y +CONFIG_AMLOGIC_THERMAL=y # # Broadcom thermal drivers @@ -5263,6 +5234,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m CONFIG_VIDEO_ROCKCHIP_RGA=m CONFIG_VIDEO_TI_VPE=m # CONFIG_VIDEO_TI_VPE_DEBUG is not set +# CONFIG_VIDEO_SUN8I_DEINTERLACE is not set CONFIG_VIDEO_TI_VPDMA=m CONFIG_VIDEO_TI_SC=m CONFIG_VIDEO_TI_CSC=m @@ -5414,9 +5386,11 @@ CONFIG_VIDEO_ADV7175=m # # Camera sensor devices # +# CONFIG_VIDEO_HI556 is not set # CONFIG_VIDEO_IMX214 is not set # CONFIG_VIDEO_IMX258 is not set # CONFIG_VIDEO_IMX274 is not set +# CONFIG_VIDEO_IMX290 is not set # CONFIG_VIDEO_IMX319 is not set # CONFIG_VIDEO_IMX355 is not set CONFIG_VIDEO_OV2640=m @@ -5743,6 +5717,7 @@ CONFIG_DRM_DP_AUX_CHARDEV=y # CONFIG_DRM_DEBUG_SELFTEST is not set CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_KMS_FB_HELPER=y +# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set @@ -5750,6 +5725,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE=y # CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=m CONFIG_DRM_VRAM_HELPER=m +CONFIG_DRM_TTM_HELPER=m CONFIG_DRM_GEM_CMA_HELPER=y CONFIG_DRM_KMS_CMA_HELPER=y CONFIG_DRM_GEM_SHMEM_HELPER=y @@ -6100,7 +6076,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=y # CONFIG_BACKLIGHT_DA9052 is not set -# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_QCOM_WLED is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3630A is not set @@ -6178,12 +6154,15 @@ CONFIG_SND_MPU401=m # CONFIG_SND_AC97_POWER_SAVE is not set CONFIG_SND_PCI=y CONFIG_SND_AD1889=m +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set @@ -6206,16 +6185,22 @@ CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m CONFIG_SND_INDIGOIOX=m CONFIG_SND_INDIGODJX=m +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_HDSP is not set CONFIG_SND_HDSPM=m +# CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set CONFIG_SND_LOLA=m +# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set @@ -6223,6 +6208,8 @@ CONFIG_SND_RIPTIDE=m # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set CONFIG_SND_VIRTUOSO=m @@ -6296,6 +6283,7 @@ CONFIG_SND_DESIGNWARE_I2S=m # CONFIG_SND_SOC_FSL_ASRC=m CONFIG_SND_SOC_FSL_SAI=m +# CONFIG_SND_SOC_FSL_MQS is not set # CONFIG_SND_SOC_FSL_AUDMIX is not set CONFIG_SND_SOC_FSL_SSI=m CONFIG_SND_SOC_FSL_SPDIF=m @@ -6357,7 +6345,7 @@ CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m CONFIG_SND_SOC_SMDK_WM8994_PCM=m CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_ODROID=m -CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631=m +CONFIG_SND_SOC_ARNDALE=m # CONFIG_SND_SOC_SOF_TOPLEVEL is not set # @@ -6433,6 +6421,8 @@ CONFIG_SND_SOC_ADAU1701=m # CONFIG_SND_SOC_ADAU1761_I2C is not set # CONFIG_SND_SOC_ADAU1761_SPI is not set CONFIG_SND_SOC_ADAU7002=m +# CONFIG_SND_SOC_ADAU7118_HW is not set +# CONFIG_SND_SOC_ADAU7118_I2C is not set # CONFIG_SND_SOC_AK4104 is not set # CONFIG_SND_SOC_AK4118 is not set # CONFIG_SND_SOC_AK4458 is not set @@ -6468,6 +6458,7 @@ CONFIG_SND_SOC_CS4271_SPI=m # CONFIG_SND_SOC_CS4349 is not set # CONFIG_SND_SOC_CS53L30 is not set # CONFIG_SND_SOC_CX2072X is not set +# CONFIG_SND_SOC_DA7213 is not set CONFIG_SND_SOC_DMIC=m CONFIG_SND_SOC_HDMI_CODEC=m # CONFIG_SND_SOC_ES7134 is not set @@ -6523,6 +6514,8 @@ CONFIG_SND_SOC_SPDIF=m # CONFIG_SND_SOC_STA350 is not set # CONFIG_SND_SOC_STI_SAS is not set # CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS2562 is not set +# CONFIG_SND_SOC_TAS2770 is not set # CONFIG_SND_SOC_TAS5086 is not set # CONFIG_SND_SOC_TAS571X is not set # CONFIG_SND_SOC_TAS5720 is not set @@ -7030,6 +7023,7 @@ CONFIG_USB_NET2280=m # CONFIG_USB_GOKU is not set # CONFIG_USB_EG20T is not set CONFIG_USB_GADGET_XILINX=y +# CONFIG_USB_TEGRA_XUDC is not set # CONFIG_USB_DUMMY_HCD is not set # end of USB Peripheral Controller @@ -7139,6 +7133,7 @@ CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_F_SDH30=y +# CONFIG_MMC_SDHCI_MILBEAUT is not set CONFIG_MMC_SDHCI_IPROC=y # CONFIG_MMC_MESON_GX is not set CONFIG_MMC_MESON_MX_SDIO=y @@ -7199,6 +7194,7 @@ CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y # CONFIG_LEDS_BCM6328 is not set # CONFIG_LEDS_BCM6358 is not set # CONFIG_LEDS_CR0014114 is not set +# CONFIG_LEDS_EL15203000 is not set CONFIG_LEDS_LM3530=m # CONFIG_LEDS_LM3532 is not set CONFIG_LEDS_LM3642=m @@ -7318,7 +7314,6 @@ CONFIG_RTC_DRV_MAX8907=m CONFIG_RTC_DRV_MAX8998=m CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_MESON_VRTC=m CONFIG_RTC_DRV_RK808=y CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m @@ -7412,6 +7407,7 @@ CONFIG_RTC_DRV_CROS_EC=y CONFIG_RTC_DRV_IMXDI=y CONFIG_RTC_DRV_FSL_FTM_ALARM=y # CONFIG_RTC_DRV_MESON is not set +CONFIG_RTC_DRV_MESON_VRTC=m CONFIG_RTC_DRV_OMAP=y CONFIG_HAVE_S3C_RTC=y CONFIG_RTC_DRV_S3C=y @@ -7472,6 +7468,7 @@ CONFIG_DW_DMAC=m # CONFIG_DW_DMAC_PCI is not set # CONFIG_DW_EDMA is not set # CONFIG_DW_EDMA_PCIE is not set +# CONFIG_SF_PDMA is not set CONFIG_TI_CPPI41=y CONFIG_TI_EDMA=y CONFIG_DMA_OMAP=y @@ -7671,6 +7668,7 @@ CONFIG_FB_TFT_PCD8544=m CONFIG_FB_TFT_RA8875=m CONFIG_FB_TFT_S6D02A1=m CONFIG_FB_TFT_S6D1121=m +CONFIG_FB_TFT_SEPS525=m CONFIG_FB_TFT_SH1106=m CONFIG_FB_TFT_SSD1289=m CONFIG_FB_TFT_SSD1305=m @@ -7722,6 +7720,9 @@ CONFIG_EXFAT_DISCARD=y CONFIG_EXFAT_DEFAULT_CODEPAGE=437 CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" CONFIG_QLGE=m +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +# CONFIG_WFX is not set # CONFIG_GOLDFISH is not set CONFIG_MFD_CROS_EC=y CONFIG_CHROME_PLATFORMS=y @@ -7734,6 +7735,7 @@ CONFIG_CROS_EC_CHARDEV=y CONFIG_CROS_EC_LIGHTBAR=m CONFIG_CROS_EC_VBC=m CONFIG_CROS_EC_DEBUGFS=m +CONFIG_CROS_EC_SENSORHUB=y CONFIG_CROS_EC_SYSFS=m # CONFIG_MELLANOX_PLATFORM is not set CONFIG_CLKDEV_LOOKUP=y @@ -7880,7 +7882,8 @@ CONFIG_OMAP_IOMMU=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y -# CONFIG_EXYNOS_IOMMU is not set +CONFIG_EXYNOS_IOMMU=y +# CONFIG_EXYNOS_IOMMU_DEBUG is not set # CONFIG_ARM_SMMU is not set # @@ -7932,6 +7935,7 @@ CONFIG_RASPBERRYPI_POWER=y # NXP/Freescale QorIQ SoC drivers # CONFIG_FSL_GUTS=y +# CONFIG_FSL_RCPM is not set # end of NXP/Freescale QorIQ SoC drivers # @@ -7948,6 +7952,8 @@ CONFIG_IMX_GPCV2_PM_DOMAINS=y CONFIG_ROCKCHIP_GRF=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_SOC_SAMSUNG=y +CONFIG_EXYNOS_ASV=y +CONFIG_EXYNOS_ASV_ARM=y CONFIG_EXYNOS_CHIPID=y CONFIG_EXYNOS_PMU=y CONFIG_EXYNOS_PMU_ARM_DRIVERS=y @@ -7960,6 +7966,8 @@ CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_SOC_TEGRA_FUSE=y CONFIG_SOC_TEGRA_FLOWCTRL=y CONFIG_SOC_TEGRA_PMC=y +CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER=y +CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER=y CONFIG_SOC_TI=y # CONFIG_KEYSTONE_NAVIGATOR_QMSS is not set # CONFIG_KEYSTONE_NAVIGATOR_DMA is not set @@ -7985,13 +7993,13 @@ CONFIG_DEVFREQ_GOV_PASSIVE=y # # DEVFREQ Drivers # -# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set +CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m CONFIG_ARM_TEGRA_DEVFREQ=y # CONFIG_ARM_TEGRA20_DEVFREQ is not set # CONFIG_ARM_RK3399_DMC_DEVFREQ is not set CONFIG_PM_DEVFREQ_EVENT=y -# CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP is not set -# CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU is not set +CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m +CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=m CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y CONFIG_EXTCON=y @@ -8022,9 +8030,11 @@ CONFIG_TI_EMIF_SRAM=y CONFIG_MVEBU_DEVBUS=y CONFIG_PL353_SMC=y CONFIG_SAMSUNG_MC=y +CONFIG_EXYNOS5422_DMC=m CONFIG_EXYNOS_SROM=y CONFIG_TEGRA_MC=y CONFIG_TEGRA20_EMC=y +CONFIG_TEGRA30_EMC=y CONFIG_TEGRA124_EMC=y CONFIG_IIO=y CONFIG_IIO_BUFFER=y @@ -8089,6 +8099,7 @@ CONFIG_AD_SIGMA_DELTA=m CONFIG_AD7124=m CONFIG_AD7266=m CONFIG_AD7291=m +CONFIG_AD7292=m CONFIG_AD7298=m CONFIG_AD7476=m CONFIG_AD7606=m @@ -8327,6 +8338,9 @@ CONFIG_ADIS16480=m CONFIG_BMI160=m CONFIG_BMI160_I2C=m CONFIG_BMI160_SPI=m +CONFIG_FXOS8700=m +CONFIG_FXOS8700_I2C=m +CONFIG_FXOS8700_SPI=m CONFIG_KMX61=m CONFIG_INV_MPU6050_IIO=m CONFIG_INV_MPU6050_I2C=m @@ -8343,6 +8357,7 @@ CONFIG_IIO_ADIS_LIB_BUFFER=y # Light sensors # CONFIG_ADJD_S311=m +CONFIG_ADUX1020=m CONFIG_AL3320A=m CONFIG_APDS9300=m CONFIG_APDS9960=m @@ -8384,6 +8399,7 @@ CONFIG_TSL4531=m CONFIG_US5182D=m CONFIG_VCNL4000=m CONFIG_VCNL4035=m +CONFIG_VEML6030=m CONFIG_VEML6070=m CONFIG_VL6180=m CONFIG_ZOPT2201=m @@ -8513,6 +8529,7 @@ CONFIG_AD2S1200=m # # Temperature sensors # +CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m CONFIG_MLX90614=m @@ -8562,6 +8579,7 @@ CONFIG_ORION_IRQCHIP=y CONFIG_IRQ_CROSSBAR=y # CONFIG_KEYSTONE_IRQ is not set CONFIG_IMX_GPCV2=y +CONFIG_LS_EXTIRQ=y CONFIG_LS_SCFG_MSI=y CONFIG_MESON_IRQ_GPIO=y CONFIG_IMX_IRQSTEER=y @@ -8589,6 +8607,7 @@ CONFIG_GENERIC_PHY_MIPI_DPHY=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN6I_MIPI_DPHY=y CONFIG_PHY_SUN9I_USB=y +# CONFIG_PHY_SUN50I_USB3 is not set CONFIG_PHY_MESON8B_USB2=y CONFIG_PHY_MESON_GXL_USB2=y CONFIG_PHY_MESON_GXL_USB3=y @@ -8617,6 +8636,7 @@ CONFIG_PHY_ROCKCHIP_DP=y CONFIG_PHY_ROCKCHIP_EMMC=y # CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set CONFIG_PHY_ROCKCHIP_INNO_USB2=y +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set CONFIG_PHY_ROCKCHIP_PCIE=y CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_PHY_ROCKCHIP_USB=y @@ -8667,6 +8687,7 @@ CONFIG_NVMEM_SYSFS=y CONFIG_NVMEM_IMX_IIM=y CONFIG_NVMEM_IMX_OCOTP=y CONFIG_ROCKCHIP_EFUSE=y +# CONFIG_ROCKCHIP_OTP is not set CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y CONFIG_MESON_MX_EFUSE=y @@ -9042,6 +9063,7 @@ CONFIG_NLS_UTF8=y CONFIG_DLM=m # CONFIG_DLM_DEBUG is not set # CONFIG_UNICODE is not set +CONFIG_IO_WQ=y # end of File systems # @@ -9053,7 +9075,7 @@ CONFIG_KEYS=y # CONFIG_BIG_KEYS is not set # CONFIG_TRUSTED_KEYS is not set # CONFIG_ENCRYPTED_KEYS is not set -CONFIG_KEY_DH_OPERATIONS=y +# CONFIG_KEY_DH_OPERATIONS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y @@ -9118,8 +9140,8 @@ CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_SKCIPHER=y +CONFIG_CRYPTO_SKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y @@ -9128,7 +9150,7 @@ CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=y +CONFIG_CRYPTO_KPP=m CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y @@ -9142,7 +9164,7 @@ CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_ENGINE=m +CONFIG_CRYPTO_ENGINE=y # # Public-key cryptography @@ -9152,6 +9174,7 @@ CONFIG_CRYPTO_DH=m CONFIG_CRYPTO_ECC=m CONFIG_CRYPTO_ECDH=m # CONFIG_CRYPTO_ECRDSA is not set +# CONFIG_CRYPTO_CURVE25519 is not set # # Authenticated Encryption with Associated Data @@ -9194,7 +9217,9 @@ CONFIG_CRYPTO_VMAC=m # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32=y -# CONFIG_CRYPTO_XXHASH is not set +CONFIG_CRYPTO_XXHASH=y +CONFIG_CRYPTO_BLAKE2B=y +# CONFIG_CRYPTO_BLAKE2S is not set CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_GHASH=m CONFIG_CRYPTO_POLY1305=m @@ -9206,7 +9231,6 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_SHA3=m @@ -9218,11 +9242,9 @@ CONFIG_CRYPTO_WP512=m # # Ciphers # -CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_LIB_ARC4=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m @@ -9230,7 +9252,6 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_LIB_DES=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m @@ -9270,7 +9291,34 @@ CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m # CONFIG_CRYPTO_STATS is not set CONFIG_CRYPTO_HASH_INFO=y + +# +# Crypto library routines +# +CONFIG_CRYPTO_LIB_AES=y +CONFIG_CRYPTO_LIB_ARC4=m +# CONFIG_CRYPTO_LIB_BLAKE2S is not set +CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m +CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m +# CONFIG_CRYPTO_LIB_CHACHA is not set +CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m +CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m +# CONFIG_CRYPTO_LIB_CURVE25519 is not set +CONFIG_CRYPTO_LIB_DES=y +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9 +CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m +CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m +# CONFIG_CRYPTO_LIB_POLY1305 is not set +# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_ALLWINNER=y +CONFIG_CRYPTO_DEV_SUN4I_SS=m +CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y +CONFIG_CRYPTO_DEV_SUN8I_CE=m +# CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG is not set +CONFIG_CRYPTO_DEV_SUN8I_SS=m +# CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG is not set CONFIG_CRYPTO_DEV_MARVELL_CESA=m # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=m @@ -9296,14 +9344,13 @@ CONFIG_CRYPTO_DEV_ATMEL_I2C=m CONFIG_CRYPTO_DEV_ATMEL_ECC=m CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m # CONFIG_CRYPTO_DEV_MXS_DCP is not set -CONFIG_CRYPTO_DEV_SUN4I_SS=m -CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y CONFIG_CRYPTO_DEV_ROCKCHIP=m # CONFIG_CRYPTO_DEV_CHELSIO is not set -# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set CONFIG_CRYPTO_DEV_VIRTIO=m # CONFIG_CRYPTO_DEV_SAFEXCEL is not set # CONFIG_CRYPTO_DEV_CCREE is not set +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y +# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y @@ -9397,6 +9444,7 @@ CONFIG_NEED_DMA_MAP_STATE=y CONFIG_DMA_DECLARE_COHERENT=y CONFIG_ARCH_HAS_SETUP_DMA_OPS=y CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y +CONFIG_DMA_NONCOHERENT_MMAP=y CONFIG_DMA_REMAP=y CONFIG_DMA_CMA=y @@ -9424,6 +9472,9 @@ CONFIG_MPILIB=y CONFIG_DIMLIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y +CONFIG_HAVE_GENERIC_VDSO=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_VDSO_32=y CONFIG_FONT_SUPPORT=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y @@ -9448,6 +9499,8 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_DYNAMIC_DEBUG is not set +CONFIG_SYMBOLIC_ERRNAME=y +CONFIG_DEBUG_BUGVERBOSE=y # end of printk and dmesg options # @@ -9458,7 +9511,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set -CONFIG_DEBUG_FS=y # CONFIG_HEADERS_INSTALL is not set CONFIG_OPTIMIZE_INLINING=y # CONFIG_DEBUG_SECTION_MISMATCH is not set @@ -9466,9 +9518,25 @@ CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # end of Compile-time checks and compiler options +# +# Generic Kernel Debugging Instruments +# CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 CONFIG_MAGIC_SYSRQ_SERIAL=y +CONFIG_DEBUG_FS=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +# CONFIG_KGDB_TESTS is not set +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x1 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +# CONFIG_UBSAN is not set +CONFIG_UBSAN_ALIGNMENT=y +# end of Generic Kernel Debugging Instruments + CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MISC=y @@ -9484,6 +9552,7 @@ CONFIG_DEBUG_MISC=y CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_SCHED_STACK_END_CHECK=y # CONFIG_DEBUG_VM is not set CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y # CONFIG_DEBUG_VIRTUAL is not set @@ -9494,14 +9563,14 @@ CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_KASAN_STACK=1 # end of Memory Debugging -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set # CONFIG_DEBUG_SHIRQ is not set # -# Debug Lockups and Hangs +# Debug Oops, Lockups and Hangs # +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set @@ -9511,15 +9580,16 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_WQ_WATCHDOG=y -# end of Debug Lockups and Hangs +# end of Debug Oops, Lockups and Hangs -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +# +# Scheduler Debugging +# CONFIG_SCHED_DEBUG=y CONFIG_SCHED_INFO=y CONFIG_SCHEDSTATS=y -CONFIG_SCHED_STACK_END_CHECK=y +# end of Scheduler Debugging + # CONFIG_DEBUG_TIMEKEEPING is not set CONFIG_DEBUG_PREEMPT=y @@ -9544,11 +9614,17 @@ CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_STACKTRACE=y # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y + +# +# Debug kernel data structures +# # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PLIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# end of Debug kernel data structures + # CONFIG_DEBUG_CREDENTIALS is not set # @@ -9564,8 +9640,6 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y @@ -9579,23 +9653,14 @@ CONFIG_RING_BUFFER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set -# CONFIG_RUNTIME_TESTING_MENU is not set -# CONFIG_MEMTEST is not set -# CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_KGDB=y -CONFIG_KGDB_SERIAL_CONSOLE=y -# CONFIG_KGDB_TESTS is not set -CONFIG_KGDB_KDB=y -CONFIG_KDB_DEFAULT_ENABLE=0x1 -CONFIG_KDB_KEYBOARD=y -CONFIG_KDB_CONTINUE_CATASTROPHIC=0 -# CONFIG_UBSAN is not set -CONFIG_UBSAN_ALIGNMENT=y CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y CONFIG_STRICT_DEVMEM=y # CONFIG_IO_STRICT_DEVMEM is not set + +# +# arm Debugging +# # CONFIG_ARM_PTDUMP_DEBUGFS is not set # CONFIG_DEBUG_WX is not set # CONFIG_UNWINDER_FRAME_POINTER is not set @@ -9609,4 +9674,18 @@ CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" # CONFIG_ARM_KPROBES_TEST is not set # CONFIG_PID_IN_CONTEXTIDR is not set # CONFIG_CORESIGHT is not set +# end of arm Debugging + +# +# Kernel Testing and Coverage +# +# CONFIG_KUNIT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_ARCH_HAS_KCOV=y +CONFIG_CC_HAS_SANCOV_TRACE_PC=y +# CONFIG_KCOV is not set +# CONFIG_RUNTIME_TESTING_MENU is not set +# CONFIG_MEMTEST is not set +# end of Kernel Testing and Coverage # end of Kernel hacking diff --git a/libre/linux-libre/config.x86_64 b/libre/linux-libre/config.x86_64 index c6b26fe83..6640293b5 100644 --- a/libre/linux-libre/config.x86_64 +++ b/libre/linux-libre/config.x86_64 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.4.8-gnu Kernel Configuration +# Linux/x86 5.5.1-gnu Kernel Configuration # # @@ -22,7 +22,6 @@ CONFIG_THREAD_INFO_IN_TASK=y # CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_COMPILE_TEST is not set -# CONFIG_HEADER_TEST is not set CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_BUILD_SALT="" @@ -64,6 +63,7 @@ CONFIG_IRQ_SIM=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_IRQ_MSI_IOMMU=y CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y CONFIG_GENERIC_IRQ_RESERVATION_MODE=y CONFIG_IRQ_FORCED_THREADING=y @@ -154,6 +154,7 @@ CONFIG_UCLAMP_BUCKETS_COUNT=5 CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y +CONFIG_CC_HAS_INT128=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y @@ -213,7 +214,6 @@ CONFIG_EXPERT=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y # CONFIG_SYSFS_SYSCALL is not set -# CONFIG_SYSCTL_SYSCALL is not set CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y @@ -373,8 +373,6 @@ CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y -CONFIG_CALGARY_IOMMU=y -CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y # CONFIG_MAXSMP is not set CONFIG_NR_CPUS_RANGE_BEGIN=2 CONFIG_NR_CPUS_RANGE_END=512 @@ -406,6 +404,7 @@ CONFIG_PERF_EVENTS_AMD_POWER=m CONFIG_X86_16BIT=y CONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=y +CONFIG_X86_IOPL_IOPERM=y CONFIG_I8K=m CONFIG_MICROCODE=y # CONFIG_MICROCODE_INTEL is not set @@ -443,7 +442,7 @@ CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y -CONFIG_X86_INTEL_UMIP=y +CONFIG_X86_UMIP=y # CONFIG_X86_INTEL_MPX is not set CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y # CONFIG_X86_INTEL_TSX_MODE_OFF is not set @@ -552,7 +551,6 @@ CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PROCESSOR_AGGREGATOR=y CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_NUMA=y CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y CONFIG_ACPI_TABLE_UPGRADE=y CONFIG_ACPI_DEBUG=y @@ -567,6 +565,7 @@ CONFIG_ACPI_BGRT=y # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set CONFIG_ACPI_NFIT=m # CONFIG_NFIT_SECURITY_DEBUG is not set +CONFIG_ACPI_NUMA=y CONFIG_ACPI_HMAT=y CONFIG_HAVE_ACPI_APEI=y CONFIG_HAVE_ACPI_APEI_NMI=y @@ -581,7 +580,8 @@ CONFIG_ACPI_WATCHDOG=y CONFIG_ACPI_EXTLOG=m CONFIG_ACPI_ADXL=y CONFIG_PMIC_OPREGION=y -CONFIG_CRC_PMIC_OPREGION=y +CONFIG_BYTCRC_PMIC_OPREGION=y +CONFIG_CHTCRC_PMIC_OPREGION=y CONFIG_XPOWER_PMIC_OPREGION=y CONFIG_BXT_WC_PMIC_OPREGION=y CONFIG_CHT_WC_PMIC_OPREGION=y @@ -701,6 +701,7 @@ CONFIG_GOOGLE_VPD=m CONFIG_EFI_ESRT=y CONFIG_EFI_RUNTIME_MAP=y # CONFIG_EFI_FAKE_MEMMAP is not set +CONFIG_EFI_SOFT_RESERVE=y CONFIG_EFI_RUNTIME_WRAPPERS=y CONFIG_EFI_CAPSULE_LOADER=m # CONFIG_EFI_TEST is not set @@ -834,7 +835,6 @@ CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_ISA_BUS_API=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y -CONFIG_64BIT_TIME=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y @@ -842,8 +842,6 @@ CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_REFCOUNT=y -# CONFIG_REFCOUNT_FULL is not set CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y CONFIG_ARCH_USE_MEMREMAP_PROT=y CONFIG_LOCK_EVENT_COUNTS=y @@ -859,14 +857,9 @@ CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y CONFIG_PLUGIN_HOSTCC="g++" CONFIG_HAVE_GCC_PLUGINS=y CONFIG_GCC_PLUGINS=y - -# -# GCC plugins -# # CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set # CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set # CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -# end of GCC plugins # end of General architecture-dependent options CONFIG_RT_MUTEXES=y @@ -896,6 +889,7 @@ CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y @@ -1047,6 +1041,7 @@ CONFIG_ARCH_HAS_PKEYS=y # CONFIG_GUP_BENCHMARK is not set CONFIG_READ_ONLY_THP_FOR_FS=y CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_MAPPING_DIRTY_HELPERS=y # end of Memory Management options CONFIG_NET=y @@ -1065,6 +1060,7 @@ CONFIG_UNIX_SCM=y CONFIG_UNIX_DIAG=y CONFIG_TLS=m CONFIG_TLS_DEVICE=y +# CONFIG_TLS_TOE is not set CONFIG_XFRM=y CONFIG_XFRM_OFFLOAD=y CONFIG_XFRM_ALGO=m @@ -1555,6 +1551,7 @@ CONFIG_RDS_TCP=m CONFIG_TIPC=m CONFIG_TIPC_MEDIA_IB=y CONFIG_TIPC_MEDIA_UDP=y +CONFIG_TIPC_CRYPTO=y CONFIG_TIPC_DIAG=m CONFIG_ATM=m CONFIG_ATM_CLIP=m @@ -1585,6 +1582,7 @@ CONFIG_NET_DSA_TAG_DSA=m CONFIG_NET_DSA_TAG_EDSA=m CONFIG_NET_DSA_TAG_MTK=m CONFIG_NET_DSA_TAG_KSZ=m +CONFIG_NET_DSA_TAG_OCELOT=m CONFIG_NET_DSA_TAG_QCA=m CONFIG_NET_DSA_TAG_LAN9303=m CONFIG_NET_DSA_TAG_SJA1105=m @@ -1996,6 +1994,7 @@ CONFIG_NFC_PN544_MEI=m CONFIG_NFC_PN533=m CONFIG_NFC_PN533_USB=m CONFIG_NFC_PN533_I2C=m +CONFIG_NFC_PN532_UART=m CONFIG_NFC_MICROREAD=m CONFIG_NFC_MICROREAD_I2C=m CONFIG_NFC_MICROREAD_MEI=m @@ -2043,7 +2042,6 @@ CONFIG_PCIEAER=y # CONFIG_PCIEAER_INJECT is not set CONFIG_PCIE_ECRC=y CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set @@ -2080,15 +2078,6 @@ CONFIG_HOTPLUG_PCI_SHPC=y # # PCI controller drivers # - -# -# Cadence PCIe controllers support -# -CONFIG_PCIE_CADENCE=y -CONFIG_PCIE_CADENCE_HOST=y -CONFIG_PCIE_CADENCE_EP=y -# end of Cadence PCIe controllers support - CONFIG_PCI_FTPCI100=y CONFIG_PCI_HOST_COMMON=y CONFIG_PCI_HOST_GENERIC=y @@ -2107,6 +2096,17 @@ CONFIG_PCIE_DW_PLAT_HOST=y CONFIG_PCIE_DW_PLAT_EP=y CONFIG_PCI_MESON=y # end of DesignWare PCI Core Support + +# +# Cadence PCIe controllers support +# +CONFIG_PCIE_CADENCE=y +CONFIG_PCIE_CADENCE_HOST=y +CONFIG_PCIE_CADENCE_EP=y +CONFIG_PCIE_CADENCE_PLAT=y +CONFIG_PCIE_CADENCE_PLAT_HOST=y +CONFIG_PCIE_CADENCE_PLAT_EP=y +# end of Cadence PCIe controllers support # end of PCI controller drivers # @@ -2177,6 +2177,7 @@ CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_FW_LOADER_COMPRESS=y +CONFIG_FW_CACHE=y # end of Firmware loader CONFIG_WANT_DEV_COREDUMP=y @@ -2343,6 +2344,7 @@ CONFIG_MTD_NAND_CAFE=m CONFIG_MTD_NAND_MXIC=m CONFIG_MTD_NAND_GPIO=m CONFIG_MTD_NAND_PLATFORM=m +CONFIG_MTD_NAND_CADENCE=m # # Misc @@ -2443,6 +2445,7 @@ CONFIG_BLK_DEV_RSXX=m CONFIG_NVME_CORE=y CONFIG_BLK_DEV_NVME=y CONFIG_NVME_MULTIPATH=y +CONFIG_NVME_HWMON=y CONFIG_NVME_FABRICS=m CONFIG_NVME_RDMA=m CONFIG_NVME_FC=m @@ -2522,45 +2525,13 @@ CONFIG_VMWARE_VMCI=m # # Intel MIC & related support # - -# -# Intel MIC Bus Driver -# CONFIG_INTEL_MIC_BUS=m - -# -# SCIF Bus Driver -# CONFIG_SCIF_BUS=m - -# -# VOP Bus Driver -# CONFIG_VOP_BUS=m - -# -# Intel MIC Host Driver -# CONFIG_INTEL_MIC_HOST=m - -# -# Intel MIC Card Driver -# CONFIG_INTEL_MIC_CARD=m - -# -# SCIF Driver -# CONFIG_SCIF=m - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# CONFIG_MIC_COSM=m - -# -# VOP Driver -# CONFIG_VOP=m CONFIG_VHOST_RING=m # end of Intel MIC & related support @@ -2980,10 +2951,7 @@ CONFIG_ATM_FORE200E_DEBUG=0 CONFIG_ATM_HE=m CONFIG_ATM_HE_USE_SUNI=y CONFIG_ATM_SOLOS=m - -# -# CAIF transport drivers -# +CONFIG_CAIF_DRIVERS=y CONFIG_CAIF_TTY=m CONFIG_CAIF_SPI_SLAVE=m CONFIG_CAIF_SPI_SYNC=y @@ -3013,6 +2981,7 @@ CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI=m CONFIG_NET_DSA_MV88E6XXX=m CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y CONFIG_NET_DSA_MV88E6XXX_PTP=y +CONFIG_NET_DSA_MSCC_FELIX=m CONFIG_NET_DSA_SJA1105=m CONFIG_NET_DSA_SJA1105_PTP=y CONFIG_NET_DSA_SJA1105_TAS=y @@ -3140,8 +3109,6 @@ CONFIG_NET_VENDOR_FUJITSU=y CONFIG_PCMCIA_FMVJ18X=m CONFIG_NET_VENDOR_GOOGLE=y CONFIG_GVE=m -CONFIG_NET_VENDOR_HP=y -CONFIG_HP100=m CONFIG_NET_VENDOR_HUAWEI=y CONFIG_HINIC=m CONFIG_NET_VENDOR_I825XX=y @@ -3377,7 +3344,6 @@ CONFIG_ADIN_PHY=m CONFIG_AMD_PHY=m CONFIG_AQUANTIA_PHY=m CONFIG_AX88796B_PHY=m -CONFIG_AT803X_PHY=m CONFIG_BCM7XXX_PHY=m CONFIG_BCM87XX_PHY=m CONFIG_BCM_NET_PHYLIB=m @@ -3389,6 +3355,7 @@ CONFIG_DP83822_PHY=m CONFIG_DP83TC811_PHY=m CONFIG_DP83848_PHY=m CONFIG_DP83867_PHY=m +CONFIG_DP83869_PHY=m CONFIG_FIXED_PHY=m CONFIG_ICPLUS_PHY=m CONFIG_INTEL_XWAY_PHY=m @@ -3402,6 +3369,7 @@ CONFIG_MICROCHIP_T1_PHY=m CONFIG_MICROSEMI_PHY=m CONFIG_NATIONAL_PHY=m CONFIG_NXP_TJA11XX_PHY=m +CONFIG_AT803X_PHY=m CONFIG_QSEMI_PHY=m CONFIG_REALTEK_PHY=m CONFIG_RENESAS_PHY=m @@ -4019,7 +3987,6 @@ CONFIG_INPUT_ATLAS_BTNS=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_KXTJ9=m -# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m @@ -4244,6 +4211,7 @@ CONFIG_HW_RANDOM_TPM=y CONFIG_TCG_TIS_CORE=m CONFIG_TCG_TIS=m CONFIG_TCG_TIS_SPI=m +CONFIG_TCG_TIS_SPI_CR50=y CONFIG_TCG_TIS_I2C_ATMEL=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_TIS_I2C_NUVOTON=m @@ -4455,6 +4423,7 @@ CONFIG_PPS_CLIENT_GPIO=m CONFIG_PTP_1588_CLOCK=y CONFIG_DP83640_PHY=m CONFIG_PTP_1588_CLOCK_KVM=m +CONFIG_PTP_1588_CLOCK_IDTCM=m # end of PTP clock support CONFIG_PINCTRL=y @@ -4486,6 +4455,7 @@ CONFIG_PINCTRL_GEMINILAKE=y CONFIG_PINCTRL_ICELAKE=y CONFIG_PINCTRL_LEWISBURG=y CONFIG_PINCTRL_SUNRISEPOINT=y +CONFIG_PINCTRL_TIGERLAKE=y CONFIG_PINCTRL_LOCHNAGAR=m CONFIG_PINCTRL_MADERA=m CONFIG_PINCTRL_CS47L15=y @@ -4493,6 +4463,7 @@ CONFIG_PINCTRL_CS47L35=y CONFIG_PINCTRL_CS47L85=y CONFIG_PINCTRL_CS47L90=y CONFIG_PINCTRL_CS47L92=y +CONFIG_PINCTRL_EQUILIBRIUM=m CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_OF_GPIO=y @@ -4648,6 +4619,7 @@ CONFIG_W1_SLAVE_DS2413=m CONFIG_W1_SLAVE_DS2406=m CONFIG_W1_SLAVE_DS2423=m CONFIG_W1_SLAVE_DS2805=m +CONFIG_W1_SLAVE_DS2430=m CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set @@ -4665,6 +4637,7 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_POWER_RESET_LTC2952=y +CONFIG_POWER_RESET_MT6323=y CONFIG_POWER_RESET_RESTART=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y @@ -4805,6 +4778,9 @@ CONFIG_SENSORS_POWR1220=m CONFIG_SENSORS_LINEAGE=m CONFIG_SENSORS_LOCHNAGAR=m CONFIG_SENSORS_LTC2945=m +CONFIG_SENSORS_LTC2947=m +CONFIG_SENSORS_LTC2947_I2C=m +CONFIG_SENSORS_LTC2947_SPI=m CONFIG_SENSORS_LTC2990=m CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m @@ -4857,6 +4833,7 @@ CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_BEL_PFE=m CONFIG_SENSORS_IBM_CFFPS=m CONFIG_SENSORS_INSPUR_IPSPS=m CONFIG_SENSORS_IR35221=m @@ -4910,6 +4887,7 @@ CONFIG_SENSORS_TMP103=m CONFIG_SENSORS_TMP108=m CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TMP513=m CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m @@ -5862,9 +5840,11 @@ CONFIG_VIDEO_THS8200=m # CONFIG_VIDEO_APTINA_PLL=m CONFIG_VIDEO_SMIAPP_PLL=m +CONFIG_VIDEO_HI556=m CONFIG_VIDEO_IMX214=m CONFIG_VIDEO_IMX258=m CONFIG_VIDEO_IMX274=m +CONFIG_VIDEO_IMX290=m CONFIG_VIDEO_IMX319=m CONFIG_VIDEO_IMX355=m CONFIG_VIDEO_OV2640=m @@ -6194,13 +6174,16 @@ CONFIG_DRM_DP_AUX_CHARDEV=y # CONFIG_DRM_DEBUG_SELFTEST is not set CONFIG_DRM_KMS_HELPER=m CONFIG_DRM_KMS_FB_HELPER=y +# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set CONFIG_DRM_LOAD_EDID_FIRMWARE=y CONFIG_DRM_DP_CEC=y CONFIG_DRM_TTM=m +CONFIG_DRM_TTM_DMA_PAGE_POOL=y CONFIG_DRM_VRAM_HELPER=m +CONFIG_DRM_TTM_HELPER=m CONFIG_DRM_GEM_CMA_HELPER=y CONFIG_DRM_KMS_CMA_HELPER=y CONFIG_DRM_GEM_SHMEM_HELPER=y @@ -6219,6 +6202,7 @@ CONFIG_DRM_I2C_NXP_TDA9950=m # ARM devices # CONFIG_DRM_KOMEDA=m +CONFIG_DRM_KOMEDA_ERROR_PRINT=y # end of ARM devices CONFIG_DRM_RADEON=m @@ -6243,6 +6227,7 @@ CONFIG_DRM_AMD_DC_DCN1_0=y CONFIG_DRM_AMD_DC_DCN2_0=y CONFIG_DRM_AMD_DC_DCN2_1=y CONFIG_DRM_AMD_DC_DSC_SUPPORT=y +CONFIG_DRM_AMD_DC_HDCP=y # CONFIG_DEBUG_KERNEL_DC is not set # end of Display Engine Configuration @@ -6282,7 +6267,11 @@ CONFIG_DRM_I915_GVT_KVMGT=m # drm/i915 Profile Guided Optimisation # CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250 +CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500 +CONFIG_DRM_I915_PREEMPT_TIMEOUT=640 CONFIG_DRM_I915_SPIN_REQUEST=5 +CONFIG_DRM_I915_STOP_TIMEOUT=100 +CONFIG_DRM_I915_TIMESLICE_DURATION=1 # end of drm/i915 Profile Guided Optimisation CONFIG_DRM_VGEM=m @@ -6494,7 +6483,7 @@ CONFIG_BACKLIGHT_DA903X=m CONFIG_BACKLIGHT_DA9052=m CONFIG_BACKLIGHT_MAX8925=m CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_PM8941_WLED=m +CONFIG_BACKLIGHT_QCOM_WLED=m CONFIG_BACKLIGHT_SAHARA=m CONFIG_BACKLIGHT_WM831X=m CONFIG_BACKLIGHT_ADP5520=m @@ -6677,7 +6666,6 @@ CONFIG_SND_YMFPCI=m # CONFIG_SND_HDA=m CONFIG_SND_HDA_INTEL=m -# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y @@ -6705,7 +6693,8 @@ CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_I915=y CONFIG_SND_HDA_EXT_CORE=m CONFIG_SND_HDA_PREALLOC_SIZE=4096 -CONFIG_SND_INTEL_NHLT=m +CONFIG_SND_INTEL_NHLT=y +CONFIG_SND_INTEL_DSP_CONFIG=m CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m @@ -6793,10 +6782,10 @@ CONFIG_SND_SOC_INTEL_SKL=m CONFIG_SND_SOC_INTEL_APL=m CONFIG_SND_SOC_INTEL_KBL=m CONFIG_SND_SOC_INTEL_GLK=m -# CONFIG_SND_SOC_INTEL_CNL is not set -# CONFIG_SND_SOC_INTEL_CFL is not set -# CONFIG_SND_SOC_INTEL_CML_H is not set -# CONFIG_SND_SOC_INTEL_CML_LP is not set +CONFIG_SND_SOC_INTEL_CNL=m +CONFIG_SND_SOC_INTEL_CFL=m +CONFIG_SND_SOC_INTEL_CML_H=m +CONFIG_SND_SOC_INTEL_CML_LP=m CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m # CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC is not set @@ -6820,6 +6809,7 @@ CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m +CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=m CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m @@ -6827,19 +6817,18 @@ CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m +CONFIG_SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m CONFIG_SND_SOC_MTK_BTCVSD=m CONFIG_SND_SOC_SOF_TOPLEVEL=y CONFIG_SND_SOC_SOF_PCI=m CONFIG_SND_SOC_SOF_ACPI=m CONFIG_SND_SOC_SOF_OF=m -CONFIG_SND_SOC_SOF_OPTIONS=m -# CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT is not set -# CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS is not set -# CONFIG_SND_SOC_SOF_DEBUG is not set +# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set CONFIG_SND_SOC_SOF=m CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y @@ -6848,8 +6837,6 @@ CONFIG_SND_SOC_SOF_INTEL_PCI=m CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m CONFIG_SND_SOC_SOF_INTEL_COMMON=m -# CONFIG_SND_SOC_SOF_BAYTRAIL_SUPPORT is not set -# CONFIG_SND_SOC_SOF_BROADWELL_SUPPORT is not set CONFIG_SND_SOC_SOF_MERRIFIELD_SUPPORT=y CONFIG_SND_SOC_SOF_MERRIFIELD=m CONFIG_SND_SOC_SOF_APOLLOLAKE_SUPPORT=y @@ -6870,10 +6857,13 @@ CONFIG_SND_SOC_SOF_TIGERLAKE_SUPPORT=y CONFIG_SND_SOC_SOF_TIGERLAKE=m CONFIG_SND_SOC_SOF_ELKHARTLAKE_SUPPORT=y CONFIG_SND_SOC_SOF_ELKHARTLAKE=m +CONFIG_SND_SOC_SOF_JASPERLAKE_SUPPORT=y +CONFIG_SND_SOC_SOF_JASPERLAKE=m CONFIG_SND_SOC_SOF_HDA_COMMON=m CONFIG_SND_SOC_SOF_HDA_LINK=y CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y # CONFIG_SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1 is not set +CONFIG_SND_SOC_SOF_HDA_COMMON_HDMI_CODEC=y CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m CONFIG_SND_SOC_SOF_HDA=m CONFIG_SND_SOC_SOF_XTENSA=m @@ -6901,6 +6891,9 @@ CONFIG_SND_SOC_ADAU1761=m CONFIG_SND_SOC_ADAU1761_I2C=m CONFIG_SND_SOC_ADAU1761_SPI=m CONFIG_SND_SOC_ADAU7002=m +CONFIG_SND_SOC_ADAU7118=m +CONFIG_SND_SOC_ADAU7118_HW=m +CONFIG_SND_SOC_ADAU7118_I2C=m CONFIG_SND_SOC_AK4104=m CONFIG_SND_SOC_AK4118=m CONFIG_SND_SOC_AK4458=m @@ -6985,6 +6978,7 @@ CONFIG_SND_SOC_RL6231=m CONFIG_SND_SOC_RL6347A=m CONFIG_SND_SOC_RT286=m CONFIG_SND_SOC_RT298=m +CONFIG_SND_SOC_RT1011=m CONFIG_SND_SOC_RT5514=m CONFIG_SND_SOC_RT5514_SPI=m CONFIG_SND_SOC_RT5616=m @@ -7015,6 +7009,8 @@ CONFIG_SND_SOC_STA32X=m CONFIG_SND_SOC_STA350=m CONFIG_SND_SOC_STI_SAS=m CONFIG_SND_SOC_TAS2552=m +CONFIG_SND_SOC_TAS2562=m +CONFIG_SND_SOC_TAS2770=m CONFIG_SND_SOC_TAS5086=m CONFIG_SND_SOC_TAS571X=m CONFIG_SND_SOC_TAS5720=m @@ -7609,6 +7605,7 @@ CONFIG_TYPEC_WCOVE=m CONFIG_TYPEC_UCSI=m # CONFIG_UCSI_CCG is not set CONFIG_UCSI_ACPI=m +CONFIG_TYPEC_HD3SS3220=m CONFIG_TYPEC_TPS6598X=m # @@ -7651,6 +7648,7 @@ CONFIG_MMC_SDHCI_OF_AT91=m CONFIG_MMC_SDHCI_OF_DWCMSHC=m CONFIG_MMC_SDHCI_CADENCE=m CONFIG_MMC_SDHCI_F_SDH30=m +CONFIG_MMC_SDHCI_MILBEAUT=m CONFIG_MMC_WBSD=m CONFIG_MMC_ALCOR=m CONFIG_MMC_TIFM_SD=m @@ -7704,6 +7702,7 @@ CONFIG_LEDS_BCM6328=m CONFIG_LEDS_BCM6358=m CONFIG_LEDS_CPCAP=m CONFIG_LEDS_CR0014114=m +CONFIG_LEDS_EL15203000=m CONFIG_LEDS_LM3530=m CONFIG_LEDS_LM3532=m CONFIG_LEDS_LM3533=m @@ -7801,7 +7800,6 @@ CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_QIB=m CONFIG_INFINIBAND_QIB_DCA=y -CONFIG_INFINIBAND_CXGB3=m CONFIG_INFINIBAND_CXGB4=m CONFIG_INFINIBAND_EFA=m CONFIG_INFINIBAND_I40IW=m @@ -8027,6 +8025,7 @@ CONFIG_DW_DMAC_PCI=y CONFIG_DW_EDMA=m CONFIG_DW_EDMA_PCIE=m CONFIG_HSU_DMA=y +CONFIG_SF_PDMA=m # # DMA Clients @@ -8417,7 +8416,6 @@ CONFIG_UWB_HWA=m CONFIG_UWB_WHCI=m CONFIG_UWB_I1480U=m CONFIG_EXFAT_FS=m -CONFIG_EXFAT_DONT_MOUNT_VFAT=y CONFIG_EXFAT_DISCARD=y # CONFIG_EXFAT_DELAYED_SYNC is not set # CONFIG_EXFAT_KERNEL_DEBUG is not set @@ -8425,6 +8423,9 @@ CONFIG_EXFAT_DISCARD=y CONFIG_EXFAT_DEFAULT_CODEPAGE=437 CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" CONFIG_QLGE=m +CONFIG_NET_VENDOR_HP=y +CONFIG_HP100=m +CONFIG_WFX=m CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m CONFIG_ACER_WIRELESS=m @@ -8518,6 +8519,7 @@ CONFIG_PCENGINES_APU2=m CONFIG_INTEL_SPEED_SELECT_INTERFACE=m # end of Intel Speed Select Technology interface support +CONFIG_SYSTEM76_ACPI=m CONFIG_PMC_ATOM=y CONFIG_MFD_CROS_EC=m CONFIG_CHROME_PLATFORMS=y @@ -8536,6 +8538,7 @@ CONFIG_CROS_EC_CHARDEV=m CONFIG_CROS_EC_LIGHTBAR=m CONFIG_CROS_EC_VBC=m CONFIG_CROS_EC_DEBUGFS=m +CONFIG_CROS_EC_SENSORHUB=m CONFIG_CROS_EC_SYSFS=m CONFIG_CROS_USBPD_LOGGER=m CONFIG_WILCO_EC=m @@ -8602,12 +8605,13 @@ CONFIG_IOMMU_SUPPORT=y # CONFIG_IOMMU_DEBUGFS is not set # CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y CONFIG_AMD_IOMMU=y CONFIG_AMD_IOMMU_V2=y CONFIG_DMAR_TABLE=y CONFIG_INTEL_IOMMU=y CONFIG_INTEL_IOMMU_SVM=y -# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set +CONFIG_INTEL_IOMMU_DEFAULT_ON=y CONFIG_INTEL_IOMMU_FLOPPY_WA=y CONFIG_IRQ_REMAP=y CONFIG_HYPERV_IOMMU=y @@ -8781,6 +8785,7 @@ CONFIG_AD_SIGMA_DELTA=m CONFIG_AD7124=m CONFIG_AD7266=m CONFIG_AD7291=m +CONFIG_AD7292=m CONFIG_AD7298=m CONFIG_AD7476=m CONFIG_AD7606=m @@ -9023,6 +9028,9 @@ CONFIG_ADIS16480=m CONFIG_BMI160=m CONFIG_BMI160_I2C=m CONFIG_BMI160_SPI=m +CONFIG_FXOS8700=m +CONFIG_FXOS8700_I2C=m +CONFIG_FXOS8700_SPI=m CONFIG_KMX61=m CONFIG_INV_MPU6050_IIO=m CONFIG_INV_MPU6050_I2C=m @@ -9041,6 +9049,7 @@ CONFIG_IIO_ADIS_LIB_BUFFER=y # CONFIG_ACPI_ALS=m CONFIG_ADJD_S311=m +CONFIG_ADUX1020=m CONFIG_AL3320A=m CONFIG_APDS9300=m CONFIG_APDS9960=m @@ -9083,6 +9092,7 @@ CONFIG_TSL4531=m CONFIG_US5182D=m CONFIG_VCNL4000=m CONFIG_VCNL4035=m +CONFIG_VEML6030=m CONFIG_VEML6070=m CONFIG_VL6180=m CONFIG_ZOPT2201=m @@ -9212,6 +9222,7 @@ CONFIG_AD2S1200=m # # Temperature sensors # +CONFIG_LTC2983=m CONFIG_MAXIM_THERMOCOUPLE=m CONFIG_HID_SENSOR_TEMP=m CONFIG_MLX90614=m @@ -9341,6 +9352,7 @@ CONFIG_DAX_DRIVER=y CONFIG_DAX=y CONFIG_DEV_DAX=m CONFIG_DEV_DAX_PMEM=m +CONFIG_DEV_DAX_HMEM=m CONFIG_DEV_DAX_KMEM=m CONFIG_DEV_DAX_PMEM_COMPAT=m CONFIG_NVMEM=y @@ -9391,6 +9403,7 @@ CONFIG_FSI=m CONFIG_FSI_NEW_DEV_NODE=y CONFIG_FSI_MASTER_GPIO=m CONFIG_FSI_MASTER_HUB=m +CONFIG_FSI_MASTER_ASPEED=m CONFIG_FSI_SCOM=m CONFIG_FSI_SBEFIFO=m CONFIG_FSI_OCC=m @@ -9785,13 +9798,13 @@ CONFIG_DLM=m # CONFIG_DLM_DEBUG is not set CONFIG_UNICODE=y # CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set +CONFIG_IO_WQ=y # end of File systems # # Security options # CONFIG_KEYS=y -CONFIG_KEYS_COMPAT=y CONFIG_KEYS_REQUEST_CACHE=y CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y @@ -9886,8 +9899,8 @@ CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_SKCIPHER=y +CONFIG_CRYPTO_SKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y @@ -9921,6 +9934,8 @@ CONFIG_CRYPTO_DH=y CONFIG_CRYPTO_ECC=m CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_ECRDSA=m +CONFIG_CRYPTO_CURVE25519=m +CONFIG_CRYPTO_CURVE25519_X86=m # # Authenticated Encryption with Associated Data @@ -9968,6 +9983,9 @@ CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRC32_PCLMUL=m CONFIG_CRYPTO_XXHASH=m +CONFIG_CRYPTO_BLAKE2B=m +CONFIG_CRYPTO_BLAKE2S=m +CONFIG_CRYPTO_BLAKE2S_X86=m CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m CONFIG_CRYPTO_GHASH=y @@ -9984,7 +10002,6 @@ CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1_SSSE3=m CONFIG_CRYPTO_SHA256_SSSE3=m CONFIG_CRYPTO_SHA512_SSSE3=m -CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_SHA3=m @@ -9997,12 +10014,10 @@ CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers # -CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_TI=m CONFIG_CRYPTO_AES_NI_INTEL=m CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_LIB_ARC4=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m @@ -10016,7 +10031,6 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST5_AVX_X86_64=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_CAST6_AVX_X86_64=m -CONFIG_CRYPTO_LIB_DES=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_DES3_EDE_X86_64=m CONFIG_CRYPTO_FCRYPT=m @@ -10064,6 +10078,28 @@ CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m # CONFIG_CRYPTO_STATS is not set CONFIG_CRYPTO_HASH_INFO=y + +# +# Crypto library routines +# +CONFIG_CRYPTO_LIB_AES=y +CONFIG_CRYPTO_LIB_ARC4=m +CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=m +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m +CONFIG_CRYPTO_LIB_BLAKE2S=m +CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m +CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m +CONFIG_CRYPTO_LIB_CHACHA=m +CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m +CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m +CONFIG_CRYPTO_LIB_CURVE25519=m +CONFIG_CRYPTO_LIB_DES=m +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=4 +CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m +CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m +CONFIG_CRYPTO_LIB_POLY1305=m +CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m @@ -10088,10 +10124,11 @@ CONFIG_CRYPTO_DEV_NITROX=m CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m CONFIG_CRYPTO_DEV_CHELSIO=m CONFIG_CHELSIO_IPSEC_INLINE=y -CONFIG_CRYPTO_DEV_CHELSIO_TLS=m CONFIG_CRYPTO_DEV_VIRTIO=m CONFIG_CRYPTO_DEV_SAFEXCEL=m CONFIG_CRYPTO_DEV_CCREE=m +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m +CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m @@ -10235,6 +10272,7 @@ CONFIG_FONT_8x16=y CONFIG_FONT_AUTOSELECT=y CONFIG_SG_POOL=y CONFIG_ARCH_HAS_PMEM_API=y +CONFIG_MEMREGION=y CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y CONFIG_ARCH_HAS_UACCESS_MCSAFE=y CONFIG_ARCH_STACKWALK=y @@ -10258,6 +10296,8 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=1 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 # CONFIG_BOOT_PRINTK_DELAY is not set CONFIG_DYNAMIC_DEBUG=y +CONFIG_SYMBOLIC_ERRNAME=y +CONFIG_DEBUG_BUGVERBOSE=y # end of printk and dmesg options # @@ -10268,7 +10308,6 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set -CONFIG_DEBUG_FS=y # CONFIG_HEADERS_INSTALL is not set CONFIG_OPTIMIZE_INLINING=y # CONFIG_DEBUG_SECTION_MISMATCH is not set @@ -10277,9 +10316,20 @@ CONFIG_STACK_VALIDATION=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # end of Compile-time checks and compiler options +# +# Generic Kernel Debugging Instruments +# CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0 CONFIG_MAGIC_SYSRQ_SERIAL=y +CONFIG_DEBUG_FS=y +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_UBSAN_ALIGNMENT=y +# end of Generic Kernel Debugging Instruments + CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MISC=y @@ -10298,25 +10348,27 @@ CONFIG_DEBUG_MISC=y CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_SCHED_STACK_END_CHECK=y # CONFIG_DEBUG_VM is not set CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y # CONFIG_DEBUG_VIRTUAL is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_ARCH_KASAN=y +CONFIG_HAVE_ARCH_KASAN_VMALLOC=y CONFIG_CC_HAS_KASAN_GENERIC=y # CONFIG_KASAN is not set CONFIG_KASAN_STACK=1 # end of Memory Debugging -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set # CONFIG_DEBUG_SHIRQ is not set # -# Debug Lockups and Hangs +# Debug Oops, Lockups and Hangs # +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set @@ -10331,15 +10383,16 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_WQ_WATCHDOG is not set -# end of Debug Lockups and Hangs +# end of Debug Oops, Lockups and Hangs -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 +# +# Scheduler Debugging +# CONFIG_SCHED_DEBUG=y CONFIG_SCHED_INFO=y CONFIG_SCHEDSTATS=y -CONFIG_SCHED_STACK_END_CHECK=y +# end of Scheduler Debugging + # CONFIG_DEBUG_TIMEKEEPING is not set CONFIG_DEBUG_PREEMPT=y @@ -10364,11 +10417,17 @@ CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_STACKTRACE=y # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y + +# +# Debug kernel data structures +# # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PLIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# end of Debug kernel data structures + # CONFIG_DEBUG_CREDENTIALS is not set # @@ -10384,9 +10443,6 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -CONFIG_FUNCTION_ERROR_INJECTION=y -# CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y @@ -10394,6 +10450,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y @@ -10430,13 +10487,15 @@ CONFIG_DYNAMIC_EVENTS=y CONFIG_PROBE_EVENTS=y CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_FUNCTION_PROFILER=y -# CONFIG_BPF_KPROBE_OVERRIDE is not set +CONFIG_BPF_KPROBE_OVERRIDE=y CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_MMIOTRACE=y CONFIG_TRACING_MAP=y CONFIG_HIST_TRIGGERS=y +# CONFIG_TRACE_EVENT_INJECT is not set # CONFIG_MMIOTRACE_TEST is not set # CONFIG_TRACEPOINT_BENCHMARK is not set # CONFIG_RING_BUFFER_BENCHMARK is not set @@ -10444,6 +10503,53 @@ CONFIG_HIST_TRIGGERS=y # CONFIG_PREEMPTIRQ_DELAY_TEST is not set # CONFIG_TRACE_EVAL_MAP_FILE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_SAMPLES is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +CONFIG_IO_STRICT_DEVMEM=y + +# +# x86 Debugging +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_X86_VERBOSE_BOOTUP is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_DBGP is not set +# CONFIG_EARLY_PRINTK_USB_XDBC is not set +CONFIG_X86_PTDUMP_CORE=y +# CONFIG_X86_PTDUMP is not set +# CONFIG_EFI_PGT_DUMP is not set +CONFIG_DEBUG_WX=y +CONFIG_DOUBLEFAULT=y +# CONFIG_DEBUG_TLBFLUSH is not set +# CONFIG_IOMMU_DEBUG is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +# CONFIG_X86_DECODER_SELFTEST is not set +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set +# CONFIG_DEBUG_ENTRY is not set +# CONFIG_DEBUG_NMI_SELFTEST is not set +# CONFIG_X86_DEBUG_FPU is not set +# CONFIG_PUNIT_ATOM_DEBUG is not set +CONFIG_UNWINDER_ORC=y +# CONFIG_UNWINDER_FRAME_POINTER is not set +# CONFIG_UNWINDER_GUESS is not set +# end of x86 Debugging + +# +# Kernel Testing and Coverage +# +# CONFIG_KUNIT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +CONFIG_FUNCTION_ERROR_INJECTION=y +# CONFIG_FAULT_INJECTION is not set +CONFIG_ARCH_HAS_KCOV=y +CONFIG_CC_HAS_SANCOV_TRACE_PC=y +# CONFIG_KCOV is not set CONFIG_RUNTIME_TESTING_MENU=y CONFIG_LKDTM=m # CONFIG_TEST_LIST_SORT is not set @@ -10486,41 +10592,6 @@ CONFIG_LKDTM=m # CONFIG_TEST_STACKINIT is not set # CONFIG_TEST_MEMINIT is not set # CONFIG_MEMTEST is not set -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_UBSAN is not set -CONFIG_UBSAN_ALIGNMENT=y -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_X86_VERBOSE_BOOTUP is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_EARLY_PRINTK_DBGP is not set -# CONFIG_EARLY_PRINTK_USB_XDBC is not set -CONFIG_X86_PTDUMP_CORE=y -# CONFIG_X86_PTDUMP is not set -# CONFIG_EFI_PGT_DUMP is not set -CONFIG_DEBUG_WX=y -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -# CONFIG_IOMMU_DEBUG is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -CONFIG_IO_DELAY_0X80=y -# CONFIG_IO_DELAY_0XED is not set -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_DEBUG_BOOT_PARAMS=y -# CONFIG_CPA_DEBUG is not set -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -# CONFIG_X86_DEBUG_FPU is not set -# CONFIG_PUNIT_ATOM_DEBUG is not set -CONFIG_UNWINDER_ORC=y -# CONFIG_UNWINDER_FRAME_POINTER is not set -# CONFIG_UNWINDER_GUESS is not set +# CONFIG_HYPERV_TESTING is not set +# end of Kernel Testing and Coverage # end of Kernel hacking -- cgit v1.2.3