diff options
Diffstat (limited to 'pcr/openrc-base')
23 files changed, 103 insertions, 1258 deletions
diff --git a/pcr/openrc-base/1.0.6-dmcrypt.confd b/pcr/openrc-base/1.0.6-dmcrypt.confd deleted file mode 100644 index 9747dff11..000000000 --- a/pcr/openrc-base/1.0.6-dmcrypt.confd +++ /dev/null @@ -1,98 +0,0 @@ -# /etc/conf.d/dmcrypt - -# For people who run dmcrypt on top of some other layer (like raid), -# use rc_need to specify that requirement. See the runscript(8) man -# page for more information. - -#-------------------- -# Instructions -#-------------------- - -# Note regarding the syntax of this file. This file is *almost* bash, -# but each line is evaluated separately. Separate swaps/targets can be -# specified. The init-script which reads this file assumes that a -# swap= or target= line starts a new section, similar to lilo or grub -# configuration. - -# Note when using gpg keys and /usr on a separate partition, you will -# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly -# and ensure that gpg has been compiled statically. -# See http://bugs.gentoo.org/90482 for more information. - -# Note that the init-script which reads this file detects whether your -# partition is LUKS or not. No mkfs is run unless you specify a makefs -# option. - -# Global options: -#---------------- - -# Max number of checks to perform (1 per second) -#dmcrypt_max_timeout=120 - -# Arguments: -#----------- -# target=<name> == Mapping name for partition. -# swap=<name> == Mapping name for swap partition. -# source='<dev>' == Real device for partition. -# key='</path/to/keyfile>[:<mode>]' == Fullpath from / or from inside removable media. -# remdev='<dev>' == Device that will be assigned to removable media. -# gpg_options='<opts>' == Default are --quiet --decrypt -# options='<opts>' == cryptsetup, for LUKS you can only use --readonly -# loop_file='<file>' == Loopback file. -# pre_mount='cmds' == commands to execute before mounting partition. -# post_mount='cmds' == commands to execute after mounting partition. -#----------- -# Supported Modes -# gpg == decrypt and pipe key into cryptsetup. -# Note: new-line character must not be part of key. -# Command to erase \n char: 'cat key | tr -d '\n' > cleanKey' - -#-------------------- -# dm-crypt examples -#-------------------- - -## swap -# Swap partitions. These should come first so that no keys make their -# way into unencrypted swap. -# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom -# If no makefs is given then mkswap will be assumed -#swap=crypt-swap -#source='/dev/hda2' - -## /home with passphrase -#target=crypt-home -#source='/dev/hda5' - -## /home with regular keyfile -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey' - -## /home with gpg protected key -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey:gpg' - -## /home with regular keyfile on removable media(such as usb-stick) -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey' -#remdev='/dev/sda1' - -##/home with gpg protected key on removable media(such as usb-stick) -#target=crypt-home -#source='/dev/hda5' -#key='/full/path/to/homekey:gpg' -#remdev='/dev/sda1' - -##/tmp with regular keyfile -#target=crypt-tmp -#source='/dev/hda6' -#key='/full/path/to/tmpkey' -#pre_mount='/sbin/mkreiserfs -f -f ${dev}' -#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}' - -## Loopback file example -#target='crypt-loop-home' -#source='/dev/loop0' -#loop_file='/mnt/crypt/home' diff --git a/pcr/openrc-base/1.5.1-dmcrypt.rc b/pcr/openrc-base/1.5.1-dmcrypt.rc deleted file mode 100644 index 9415a0bce..000000000 --- a/pcr/openrc-base/1.5.1-dmcrypt.rc +++ /dev/null @@ -1,353 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/cryptsetup/files/1.5.1-dmcrypt.rc,v 1.2 2014/10/19 04:37:19 vapier Exp $ - -depend() { - before checkfs fsck -} - -# We support multiple dmcrypt instances based on $SVCNAME -execute_hook="dm_crypt_execute_dmcrypt" -# XXX: Should we drop this ? -# execute_hook="dm_crypt_execute_localmount" -conf_file="/etc/conf.d/${SVCNAME}" - -# Get splash helpers if available. -if [ -e /sbin/splash-functions.sh ] ; then - . /sbin/splash-functions.sh -fi - -# Setup mappings for an individual target/swap -# Note: This relies on variables localized in the main body below. -dm_crypt_execute_dmcrypt() { - local dev ret mode foo - - if [ -n "${target}" ] ; then - # let user set options, otherwise leave empty - : ${options:=' '} - elif [ -n "${swap}" ] ; then - if cryptsetup isLuks ${source} 2>/dev/null ; then - ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup." - return - fi - target=${swap} - # swap contents do not need to be preserved between boots, luks not required. - # suspend2 users should have initramfs's init handling their swap partition either way. - : ${options:='-c aes -h sha1 -d /dev/urandom'} - : ${pre_mount:='mkswap ${dev}'} - else - return - fi - if [ "x${source#UUID}" != "x${source}" ]; then - source=${source#UUID=} - source="$(blkid -U ${source})" - fi - if [ -z "${source}" ] && [ ! -e "${source}" ] ; then - ewarn "source \"${source}\" for ${target} missing, skipping..." - return - fi - - if [ -n "${loop_file}" ] ; then - dev="/dev/mapper/${target}" - ebegin " Setting up loop device ${source}" - losetup ${source} ${loop_file} - fi - - # cryptsetup: - # open <device> <name> # <device> is $source - # create <name> <device> # <name> is $target - local arg1="create" arg2="${target}" arg3="${source}" - if cryptsetup isLuks ${source} 2>/dev/null ; then - arg1="open" - arg2="${source}" - arg3="${target}" - fi - - # Older versions reported: - # ${target} is active: - # Newer versions report: - # ${target} is active[ and is in use.] - if cryptsetup status ${target} | egrep -q ' is active' ; then - einfo "dm-crypt mapping ${target} is already configured" - return - fi - splash svc_input_begin ${SVCNAME} >/dev/null 2>&1 - - # Handle keys - if [ -n "${key}" ] ; then - read_abort() { - # some colors - local ans savetty resettty - [ -z "${NORMAL}" ] && eval $(eval_ecolors) - einfon " $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) " - shift - # This is ugly as s**t. But POSIX doesn't provide `read -t`, so - # we end up having to implement our own crap with stty/etc... - savetty=$(stty -g) - resettty='stty ${savetty}; trap - EXIT HUP INT TERM' - trap 'eval "${resettty}"' EXIT HUP INT TERM - stty -icanon - [ "${1}" = -t ] && stty min 0 time "$(( $2 * 10 ))" - ans=$(dd count=1 bs=1 2>/dev/null) || ans='' - eval "${resettty}" - if [ -z "${ans}" ] ; then - printf '\r' - else - echo - fi - case ${ans} in - [yY]) return 0;; - *) return 1;; - esac - } - - # Notes: sed not used to avoid case where /usr partition is encrypted. - mode=${key/*:/} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg - key=${key/:*/} - case "${mode}" in - gpg|reg) - # handle key on removable device - if [ -n "${remdev}" ] ; then - # temp directory to mount removable device - local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$" - if [ ! -d "${mntrem}" ] ; then - if ! mkdir -p "${mntrem}" ; then - ewarn "${source} will not be decrypted ..." - einfo "Reason: Unable to create temporary mount point '${mntrem}'" - return - fi - fi - i=0 - einfo "Please insert removable device for ${target}" - while [ ${i} -lt ${dmcrypt_max_timeout:-120} ] ; do - foo="" - if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then - # keyfile exists? - if [ ! -e "${mntrem}${key}" ] ; then - umount -n "${mntrem}" - rmdir "${mntrem}" - einfo "Cannot find ${key} on removable media." - read_abort "Abort" ${read_timeout:--t 1} && return - else - key="${mntrem}${key}" - break - fi - else - [ -e "${remdev}" ] \ - && foo="mount failed" \ - || foo="mount source not found" - fi - : $((i += 1)) - read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return - done - else # keyfile ! on removable device - if [ ! -e "${key}" ] ; then - ewarn "${source} will not be decrypted ..." - einfo "Reason: keyfile ${key} does not exist." - return - fi - fi - ;; - *) - ewarn "${source} will not be decrypted ..." - einfo "Reason: mode ${mode} is invalid." - return - ;; - esac - else - mode=none - fi - ebegin " ${target} using: ${options} ${arg1} ${arg2} ${arg3}" - if [ "${mode}" = "gpg" ] ; then - : ${gpg_options:='-q -d'} - # gpg available ? - if type -p gpg >/dev/null ; then - for i in 0 1 2 ; do - # paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected. - # save stdin stdout stderr "values" - gpg ${gpg_options} ${key} 2>/dev/null | cryptsetup ${options} ${arg1} ${arg2} ${arg3} - ret=$? - [ ${ret} -eq 0 ] && break - done - eend ${ret} "failure running cryptsetup" - else - ewarn "${source} will not be decrypted ..." - einfo "Reason: cannot find gpg application." - einfo "You have to install app-crypt/gnupg first." - einfo "If you have /usr on its own partition, try copying gpg to /bin ." - fi - else - if [ "${mode}" = "reg" ] ; then - cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3} - ret=$? - eend ${ret} "failure running cryptsetup" - else - cryptsetup ${options} ${arg1} ${arg2} ${arg3} - ret=$? - eend ${ret} "failure running cryptsetup" - fi - fi - if [ -d "${mntrem}" ] ; then - umount -n ${mntrem} 2>/dev/null >/dev/null - rmdir ${mntrem} 2>/dev/null >/dev/null - fi - splash svc_input_end ${SVCNAME} >/dev/null 2>&1 - - if [ ${ret} -ne 0 ] ; then - cryptfs_status=1 - else - if [ -n "${pre_mount}" ] ; then - dev="/dev/mapper/${target}" - ebegin " pre_mount: ${pre_mount}" - eval "${pre_mount}" > /dev/null - ewend $? || cryptfs_status=1 - fi - fi -} - -# Run any post_mount commands for an individual mount -# -# Note: This relies on variables localized in the main body below. -dm_crypt_execute_localmount() { - local mount_point - - [ -z "${target}" ] && [ -z "${post_mount}" ] && return - - if ! cryptsetup status ${target} | egrep -q '\<active:' ; then - ewarn "Skipping unmapped target ${target}" - cryptfs_status=1 - return - fi - - mount_point=$(grep "/dev/mapper/${target}" /proc/mounts | cut -d' ' -f2) - if [ -z "${mount_point}" ] ; then - ewarn "Failed to find mount point for ${target}, skipping" - cryptfs_status=1 - fi - - if [ -n "${post_mount}" ] ; then - ebegin "Running post_mount commands for target ${target}" - eval "${post_mount}" >/dev/null - eend $? || cryptfs_status=1 - fi -} - -# Lookup optional bootparams -get_bootparam_val() { - # We're given something like: - # foo=bar=cow - # Return the "bar=cow" part. - case $1 in - *\=*) - local key=$(echo "$1" | cut -f1 -d=) - echo "$1" | cut -c $(( ${#key} + 2 )) - ;; - esac -} - -start() { - local header=true cryptfs_status=0 - local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev - - local x - for x in $(cat /proc/cmdline) ; do - case "${x}" in - key_timeout\=*) - local KEY_TIMEOUT=$(get_bootparam_val "${x}") - if [ ${KEY_TIMEOUT} -gt 0 ] ; then - read_timeout="-t ${KEY_TIMEOUT}" - fi - ;; - esac - done - - while read -u 3 targetline ; do - case ${targetline} in - # skip comments and blank lines - ""|"#"*) continue ;; - # skip service-specific openrc configs #377927 - rc_*) continue ;; - esac - - ${header} && ebegin "Setting up dm-crypt mappings" - header=false - - # check for the start of a new target/swap - case ${targetline} in - target=*|swap=*) - # If we have a target queued up, then execute it - ${execute_hook} - - # Prepare for the next target/swap by resetting variables - unset gpg_options key loop_file target options pre_mount post_mount source swap remdev - ;; - - gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*) - if [ -z "${target}${swap}" ] ; then - ewarn "Ignoring setting outside target/swap section: ${targetline}" - continue - fi - ;; - - dmcrypt_max_timeout=*) - # ignore global options - continue - ;; - - *) - ewarn "Skipping invalid line in ${conf_file}: ${targetline}" - ;; - esac - - # Queue this setting for the next call to dm_crypt_execute_xxx - eval "${targetline}" - done 3< ${conf_file} - - # If we have a target queued up, then execute it - ${execute_hook} - - ewend ${cryptfs_status} "Failed to setup dm-crypt devices" -} - -stop() { - local line header - - # Break down all mappings - header=true - egrep "^(target|swap)=" ${conf_file} | \ - while read line ; do - ${header} && einfo "Removing dm-crypt mappings" - header=false - - target= swap= - eval ${line} - - [ -n "${swap}" ] && target=${swap} - if [ -z "${target}" ] ; then - ewarn "invalid line in ${conf_file}: ${line}" - continue - fi - - ebegin " ${target}" - cryptsetup remove ${target} - eend $? - done - - # Break down loop devices - header=true - grep '^source=./dev/loop' ${conf_file} | \ - while read line ; do - ${header} && einfo "Detaching dm-crypt loop devices" - header=false - - source= - eval ${line} - - ebegin " ${source}" - losetup -d "${source}" - eend $? - done - - return 0 -} diff --git a/pcr/openrc-base/PKGBUILD b/pcr/openrc-base/PKGBUILD index 69296e2a7..476235c28 100644 --- a/pcr/openrc-base/PKGBUILD +++ b/pcr/openrc-base/PKGBUILD @@ -1,141 +1,126 @@ -# Maintainer : freaj <freaj@riseup.net> -# Maintainer (Manjaro): artoo <artoo@manjaro.org> - -_Icron1=cronie-1.3-initd -_Icron2=anacron-1.0-initd -_Ccrypt=1.0.6-dmcrypt.confd -_Icrypt=1.5.1-dmcrypt.rc -_Idbus=dbus.initd -_Inscd=nscd -_Cdm=device-mapper.conf-1.02.22-r3 -_Idm1=device-mapper.rc-2.02.105-r2 -_Idm2=dmeventd.initd-2.02.67-r1 -_Clvm=lvm.confd-2.02.28-r2 -_Ilvm1=lvm.rc-2.02.105-r2 -_Ilvm2=lvm-monitoring.initd-2.02.105-r2 -_Ilvm3=lvmetad.initd-2.02.105-r2 -_Cmdadm=mdadm.confd -_Imdadm=mdadm.rc -_Idhcpcd=dhcpcd.initd -_Cmdraid=mdraid.confd -_Imdraid=mdraid.rc -_Ieudev=udev-postmount +# Maintainer (Arch): artoo <artoo@manjaro.org> +# Maintainer: Omar Vega Ramos <ovruni@gnu.org.pe> +# Contributor: freaj <freaj@riseup.net> _gentoo_uri="http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86" - -# set false if you want building without eudev(leaving systemd) -_is_eudev=true - pkgbase=openrc-base -_pkgname=('cronie-openrc' - 'cryptsetup-openrc' - 'dbus-openrc' - 'dhcpcd-openrc' - 'device-mapper-openrc' - 'glibc-openrc' - 'inetutils-openrc' - 'lvm2-openrc' - 'mdadm-openrc') -if ${_is_eudev};then - pkgname=( ${_pkgname[@]} 'eudev-openrc') -else - pkgname=( ${_pkgname[@]} ) -fi -pkgver=20150323 +pkgname=('cronie-openrc' + 'cryptsetup-openrc' + 'dbus-openrc' + 'dhcpcd-openrc' + 'device-mapper-openrc' + 'glibc-openrc' + 'inetutils-openrc' + 'lvm2-openrc' + 'mdadm-openrc') +pkgver=20150613 pkgrel=1 pkgdesc="OpenRC init scripts" arch=('any') url="https://github.com/manjaro/packages-openrc" license=('GPL2') -groups=('openrc' 'openrc-base') +groups=('openrc-base') conflicts=('initscripts' - 'systemd-sysvcompat' - 'openrc' - 'openrc-git' - 'openrc-sysvinit') -source=("${_gentoo_uri}/sys-process/cronie/files/${_Icron1}" - "${_gentoo_uri}/sys-process/cronie/files/${_Icron2}" - "${_gentoo_uri}/sys-fs/cryptsetup/files/${_Ccrypt}" - "${_gentoo_uri}/sys-fs/cryptsetup/files/${_Icrypt}" - "${_gentoo_uri}/sys-apps/dbus/files/${_Idbus}" - "${_gentoo_uri}/sys-libs/glibc/files/${_Inscd}" - "${_gentoo_uri}/sys-fs/lvm2/files/${_Cdm}" - "${_gentoo_uri}/sys-fs/lvm2/files/${_Idm1}" - "${_gentoo_uri}/sys-fs/lvm2/files/${_Idm2}" - "${_gentoo_uri}/sys-fs/lvm2/files/${_Clvm}" - "${_gentoo_uri}/sys-fs/lvm2/files/${_Ilvm1}" - "${_gentoo_uri}/sys-fs/lvm2/files/${_Ilvm2}" - "${_gentoo_uri}/sys-fs/lvm2/files/${_Ilvm3}" - "${_gentoo_uri}/sys-fs/mdadm/files/${_Cmdadm}" - "${_gentoo_uri}/sys-fs/mdadm/files/${_Imdadm}" - "${_gentoo_uri}/sys-fs/mdadm/files/${_Cmdraid}" - "${_gentoo_uri}/sys-fs/mdadm/files/${_Imdraid}" - "${_gentoo_uri}/net-misc/dhcpcd/files/${_Idhcpcd}" - "${_gentoo_uri}/sys-fs/eudev/files/${_Ieudev}" - 'inetutils.confd' - 'inetutils.initd') - -_shebang='s|#!/sbin/runscript|#!/usr/bin/openrc-run|' -_runpath='s|/var/run|/run|g' -_binpath=('s|/usr/sbin|/usr/bin|g' 's|/sbin|/usr/bin|g') + 'systemd-sysvcompat' + 'openrc' + 'openrc-git' + 'openrc-sysvinit') +source=("cronie.initd::${_gentoo_uri}/sys-process/cronie/files/cronie-1.3-initd" + "dmcrypt.confd::${_gentoo_uri}/sys-fs/cryptsetup/files/1.6.7-dmcrypt.confd" + "dmcrypt.initd::${_gentoo_uri}/sys-fs/cryptsetup/files/1.6.7-dmcrypt.rc" + "dbus.initd::${_gentoo_uri}/sys-apps/dbus/files/dbus.initd" + "nscd.initd::${_gentoo_uri}/sys-libs/glibc/files/nscd" + "device-mapper.confd::${_gentoo_uri}/sys-fs/lvm2/files/device-mapper.conf-1.02.22-r3" + "device-mapper.initd::${_gentoo_uri}/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2" + "dmeventd.initd::${_gentoo_uri}/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1" + "lvm.confd::${_gentoo_uri}/sys-fs/lvm2/files/lvm.confd-2.02.28-r2" + "lvm.initd::${_gentoo_uri}/sys-fs/lvm2/files/lvm.rc-2.02.105-r2" + "lvm-monitoring.initd::${_gentoo_uri}/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2" + "lvmetad.initd::${_gentoo_uri}/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2" + "mdadm.confd::${_gentoo_uri}/sys-fs/mdadm/files/mdadm.confd" + "mdadm.initd::${_gentoo_uri}/sys-fs/mdadm/files/mdadm.rc" + "mdraid.confd::${_gentoo_uri}/sys-fs/mdadm/files/mdraid.confd" + "mdraid.initd::${_gentoo_uri}/sys-fs/mdadm/files/mdraid.rc" + "dhcpcd.initd::${_gentoo_uri}/net-misc/dhcpcd/files/dhcpcd.initd" + 'ftpd.confd' + 'ftpd.initd') +sha256sums=('292a7b20fe33bd027357475fea6aa1194afa7e5c1c47a85299db945b9d1c847e' + '3d933a54abe62a547294b83208dbf5d7615d9c7f380d6504c91fff3620530803' + '4bec4e67e2447a4472eecdd2fb31325b4dd558e1fe283683f86707629b9d192d' + '98e37b8b6ed25004e48c5855d74c9361eea06d3fee13cefcc0ed10ccf452aa01' + '6165db3a2fcb251d4f3655c0461e018ce9c92a37f7f22a8fd2b75178b5435bc8' + '57777904f12a35617e5a4193c964ebb32396452487fd02353e71e16e7b46bc22' + '036b6de05e6cbd921a667d6fc6b01d30c8f9b720e1a0d0e2453ecd62d32573fb' + '0c051388991ba69afbf2f6baf36ba227d7c26fc8f0d7588d8de76d9a74886d79' + '28370c089c39c248d7ded0960b8d8a9256bada44d44c22ce3cec87d512ef6844' + 'a5754ffa0a05a0c29a9f6b5acf1b21dd313581fd6156c1ef722dc620e0114676' + 'd7655cadd3a3a9d3683a540413365310ca9503c38fd21a9bfccec40630ca72f1' + '60accb4b6114753232f2db0adf3fc3f46d4459bfedf79b888801a13c55d79fa9' + 'ec55674955af7a31da51b8b72b599e8519809287dad796a9b16155bcba471b79' + '3073b14619cb7b2c99c33f2d6cfd1e59ce5557899bffebaa65fa52f3caffadc7' + 'b489ced10391d4295bb8ca29e128b0d4217c290f1b4e37b05f5a9275048d289d' + '003b2c832909f1b89ffd283fb02d2712791d922394e201de0e42c0b463b2b1bd' + '72b42c9939fda3fb56666813513029ed36194c1708bddce06bcb3e131e547492' + '59fe1aa68c43f4958afc397a0d6b35da263a20fcdb457005123a0d64cb1f7477' + '7f46e5e9ac9f204fb1564560c506a5bb4cede8823b89e3f1844e4f8be258e9ef') pkgver() { date +%Y%m%d } +_inst_initd(){ + install -Dm755 ${srcdir}/$1.initd ${pkgdir}/etc/init.d/$1 + + sed -e 's|#!/sbin/runscript|#!/usr/bin/openrc-run|' \ + -e 's|/var/run|/run|g' \ + -i ${pkgdir}/etc/init.d/$1 +} + +_inst_confd(){ + install -Dm755 ${srcdir}/$1.confd ${pkgdir}/etc/conf.d/$1 +} + package_cronie-openrc() { pkgdesc="OpenRC cronie init script" - groups=('openrc' 'openrc-base' 'openrc-desktop') + groups=('openrc-base' 'openrc-desktop') depends=('openrc-core' 'cronie') provides=('openrc-cron') conflicts=('fcron' - 'fcron-openrc' - 'openrc' - 'openrc-git' - 'openrc-arch-services-git' - 'initscripts' - 'systemd-sysvcompat') + 'fcron-openrc' + 'openrc' + 'openrc-git' + 'openrc-arch-services-git' + 'initscripts' + 'systemd-sysvcompat') backup=('etc/init.d/cronie') install=cronie.install - install -Dm755 "${srcdir}/${_Icron1}" "${pkgdir}/etc/init.d/cronie" - install -Dm755 "${srcdir}/${_Icron2}" "${pkgdir}/etc/init.d/anacron" + _inst_initd 'cronie' - for f in ${pkgdir}/etc/init.d/*; do - sed -e "${_shebang}" \ - -e "${_binpath[0]}" \ - -e "${_runpath}" \ - -i $f - done + sed -e 's|/usr/sbin|/usr/bin|g' -i ${pkgdir}/etc/init.d/cronie } package_dhcpcd-openrc() { pkgdesc="OpenRC dhcpcd init script" - groups=('openrc' 'openrc-base' 'openrc-desktop') + groups=('openrc-base' 'openrc-desktop') depends=('openrc-core' 'dhcpcd') install=dhcpcd.install - install -Dm755 "${srcdir}/${_Idhcpcd}" "${pkgdir}/etc/init.d/dhcpcd" + _inst_initd 'dhcpcd' - sed -e "${_shebang}" \ - -e "${_binpath[1]}" \ - -e "${_runpath}" \ - -i "${pkgdir}/etc/init.d/dhcpcd" + sed -e 's|/sbin|/usr/bin|g' -i "${pkgdir}/etc/init.d/dhcpcd" } package_dbus-openrc() { pkgdesc="OpenRC dbus init script" - groups=('openrc' 'openrc-base' 'openrc-desktop') + groups=('openrc-base' 'openrc-desktop') depends=('openrc-core' 'dbus') install=dbus.install - install -Dm755 "${srcdir}/${_Idbus}" "${pkgdir}/etc/init.d/dbus" + _inst_initd 'dbus' - local _p1='s|dbus.pid|dbus/pid|g' - sed -e "${_shebang}" -e "${_runpath}" \ - -e "${_p1}" \ - -i "${pkgdir}/etc/init.d/dbus" + sed -e 's|dbus.pid|dbus/pid|g' -i "${pkgdir}/etc/init.d/dbus" } package_device-mapper-openrc() { @@ -144,15 +129,12 @@ package_device-mapper-openrc() { backup=('etc/conf.d/device-mapper') install=device-mapper.install - install -Dm755 "${srcdir}/${_Cdm}" "${pkgdir}/etc/conf.d/device-mapper" - install -Dm755 "${srcdir}/${_Idm1}" "${pkgdir}/etc/init.d/device-mapper" - install -Dm755 "${srcdir}/${_Idm2}" "${pkgdir}/etc/init.d/dmeventd" + _inst_confd 'device-mapper' + _inst_initd 'device-mapper' + _inst_initd 'dmeventd' for f in ${pkgdir}/etc/init.d/*; do - sed -e "${_shebang}" \ - -e "${_binpath[1]}" \ - -e "${_runpath}" \ - -i $f + sed -e 's|/sbin|/usr/bin|g' -i $f done } @@ -162,13 +144,10 @@ package_cryptsetup-openrc() { backup=('etc/conf.d/dmcrypt') install=cryptsetup.install - install -Dm755 "${srcdir}/${_Ccrypt}" "${pkgdir}/etc/conf.d/dmcrypt" - install -Dm755 "${srcdir}/${_Icrypt}" "${pkgdir}/etc/init.d/dmcrypt" + _inst_confd 'dmcrypt' + _inst_initd 'dmcrypt' - sed -e "${_shebang}" \ - -e "${_binpath[0]}" \ - -e "${_runpath}" \ - -i "${pkgdir}/etc/init.d/dmcrypt" + sed -e 's|/usr/sbin|/usr/bin|g' -i "${pkgdir}/etc/init.d/dmcrypt" } package_glibc-openrc() { @@ -178,12 +157,9 @@ package_glibc-openrc() { 'bind-openrc') install=glibc.install - install -Dm755 "${srcdir}/${_Inscd}" "${pkgdir}/etc/init.d/nscd" + _inst_initd 'nscd' - sed -e "${_shebang}" \ - -e "${_binpath[0]}" \ - -e "${_runpath}" \ - -i "${pkgdir}/etc/init.d/nscd" + sed -e 's|/usr/sbin|/usr/bin|g' -i "${pkgdir}/etc/init.d/nscd" } package_inetutils-openrc() { @@ -192,8 +168,8 @@ package_inetutils-openrc() { backup=('etc/conf.d/ftpd') install=inetutils.install - install -Dm755 "${srcdir}/inetutils.confd" "${pkgdir}/etc/conf.d/ftpd" - install -Dm755 "${srcdir}/inetutils.initd" "${pkgdir}/etc/init.d/ftpd" + _inst_confd 'ftpd' + _inst_initd 'ftpd' } package_lvm2-openrc() { @@ -202,16 +178,13 @@ package_lvm2-openrc() { backup=('etc/conf.d/lvm') install=lvm2.install - install -Dm755 "${srcdir}/${_Clvm}" "${pkgdir}/etc/conf.d/lvm" - install -Dm755 "${srcdir}/${_Ilvm1}" "${pkgdir}/etc/init.d/lvm" - install -Dm755 "${srcdir}/${_Ilvm2}" "${pkgdir}/etc/init.d/lvm-monitoring" - install -Dm755 "${srcdir}/${_Ilvm3}" "${pkgdir}/etc/init.d/lvmetad" + _inst_confd 'lvm' + _inst_initd 'lvm' + _inst_initd 'lvm-monitoring' + _inst_initd 'lvmetad' for f in ${pkgdir}/etc/init.d/*; do - sed -e "${_shebang}" \ - -e "${_binpath[1]}" \ - -e "${_runpath}" \ - -i $f + sed -e 's|/sbin|/usr/bin|g' -i $f done } @@ -222,48 +195,9 @@ package_mdadm-openrc() { backup=('etc/conf.d/mdadm') install=mdadm.install - install -Dm755 "${srcdir}/${_Cmdadm}" "${pkgdir}/etc/conf.d/mdadm" - install -Dm755 "${srcdir}/${_Imdadm}" "${pkgdir}/etc/init.d/mdadm" - - install -Dm755 "${srcdir}/${_Cmdraid}" "${pkgdir}/etc/conf.d/mdraid" - install -Dm755 "${srcdir}/${_Imdraid}" "${pkgdir}/etc/init.d/mdraid" - - sed -e "${_shebang}" \ - -e "${_runpath}" \ - -i "${pkgdir}/etc/init.d/mdadm" - sed -e "${_shebang}" \ - -i "${pkgdir}/etc/init.d/mdraid" -} - -package_eudev-openrc(){ - pkgdesc="OpenRC eudev postmount script" - groups=('eudev-base') - depends=('openrc-core' 'eudev') - install=eudev.install - - install -Dm755 "${srcdir}/${_Ieudev}" "${pkgdir}/etc/init.d/udev-postmount" + _inst_confd 'mdadm' + _inst_initd 'mdadm' - sed -e "${_shebang}" -i "${pkgdir}/etc/init.d/udev-postmount" + _inst_confd 'mdraid' + _inst_initd 'mdraid' } - -sha256sums=('292a7b20fe33bd027357475fea6aa1194afa7e5c1c47a85299db945b9d1c847e' - '7ff283ee8b492929d33831461b72e872fe9d3a98344cf39af442f575875b0132' - '9696d70a49296113a9ae3dff1b023b859df984bfb3572426ba199a630b628ce8' - '1010666cfb3cd2c662032c3e8f3c2aec35316fc376d0ce30f2c821b581ae2c6d' - '98e37b8b6ed25004e48c5855d74c9361eea06d3fee13cefcc0ed10ccf452aa01' - '6165db3a2fcb251d4f3655c0461e018ce9c92a37f7f22a8fd2b75178b5435bc8' - '57777904f12a35617e5a4193c964ebb32396452487fd02353e71e16e7b46bc22' - '036b6de05e6cbd921a667d6fc6b01d30c8f9b720e1a0d0e2453ecd62d32573fb' - '0c051388991ba69afbf2f6baf36ba227d7c26fc8f0d7588d8de76d9a74886d79' - '28370c089c39c248d7ded0960b8d8a9256bada44d44c22ce3cec87d512ef6844' - 'a5754ffa0a05a0c29a9f6b5acf1b21dd313581fd6156c1ef722dc620e0114676' - 'd7655cadd3a3a9d3683a540413365310ca9503c38fd21a9bfccec40630ca72f1' - '60accb4b6114753232f2db0adf3fc3f46d4459bfedf79b888801a13c55d79fa9' - 'ec55674955af7a31da51b8b72b599e8519809287dad796a9b16155bcba471b79' - '3073b14619cb7b2c99c33f2d6cfd1e59ce5557899bffebaa65fa52f3caffadc7' - '1b7918c4bdd024607bcb49d7cea0a77cb70502d2fbb4dbe07024bb5b5699c8e0' - '73303ec32b7010c7f6d4fd66dde1a5baea07e73c79d3e516dce31000abdb4089' - '72b42c9939fda3fb56666813513029ed36194c1708bddce06bcb3e131e547492' - '0220e949b1f31832a205021c0a8615e77b27b73b7c9b16ef4a61bbd2774aeecb' - '59fe1aa68c43f4958afc397a0d6b35da263a20fcdb457005123a0d64cb1f7477' - '7f46e5e9ac9f204fb1564560c506a5bb4cede8823b89e3f1844e4f8be258e9ef') diff --git a/pcr/openrc-base/anacron-1.0-initd b/pcr/openrc-base/anacron-1.0-initd deleted file mode 100644 index 6462b900e..000000000 --- a/pcr/openrc-base/anacron-1.0-initd +++ /dev/null @@ -1,18 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-process/cronie/files/anacron-1.0-initd,v 1.4 2014/03/04 00:17:58 polynomial-c Exp $ - -# anacron forks itself when -d gets omitted. So s-s-d fails to create a valid -# pidfile. DO NOT remove -d from command_args and let s-s-d start anacron -# in background! - -command="/usr/sbin/anacron" -command_args="-d -s -S /var/spool/anacron" -pidfile="/var/run/anacron.pid" -command_background="true" - -depend() { - use clock logger - need localmount -} diff --git a/pcr/openrc-base/cronie-1.3-initd b/pcr/openrc-base/cronie-1.3-initd deleted file mode 100644 index 138530f5e..000000000 --- a/pcr/openrc-base/cronie-1.3-initd +++ /dev/null @@ -1,14 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-process/cronie/files/cronie-1.3-initd,v 1.3 2014/03/04 00:17:58 polynomial-c Exp $ - -command="/usr/sbin/crond" -command_args="${CRONDARGS}" -pidfile="/var/run/crond.pid" - -depend() { - use clock logger - need localmount - provide cron -} diff --git a/pcr/openrc-base/dbus.initd b/pcr/openrc-base/dbus.initd deleted file mode 100644 index 65271f69c..000000000 --- a/pcr/openrc-base/dbus.initd +++ /dev/null @@ -1,50 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2011 Gentoo Foundation -# Distributed under the terms of the GNU General Public License, v2 or later -# $Header: /var/cvsroot/gentoo-x86/sys-apps/dbus/files/dbus.initd,v 1.1 2011/11/05 13:56:10 ssuominen Exp $ - -extra_started_commands="reload" - -depend() { - need localmount - after bootmisc -} - -start() { - ebegin "Starting D-BUS system messagebus" - /usr/bin/dbus-uuidgen --ensure=/etc/machine-id - - # We need to test if /var/run/dbus exists, since script will fail if it does not - [ ! -e /var/run/dbus ] && mkdir /var/run/dbus - - start-stop-daemon --start --pidfile /var/run/dbus.pid --exec /usr/bin/dbus-daemon -- --system - eend $? -} - -stop() { - local retval - - ebegin "Stopping D-BUS system messagebus" - - start-stop-daemon --stop --pidfile /var/run/dbus.pid - retval=$? - - eend ${retval} - - [ -S /var/run/dbus/system_bus_socket ] && rm -f /var/run/dbus/system_bus_socket - - return ${retval} -} - -reload() { - local retval - - ebegin "Reloading D-BUS messagebus config" - - /usr/bin/dbus-send --print-reply --system --type=method_call \ - --dest=org.freedesktop.DBus \ - / org.freedesktop.DBus.ReloadConfig > /dev/null - retval=$? - eend ${retval} - return ${retval} -} diff --git a/pcr/openrc-base/device-mapper.conf-1.02.22-r3 b/pcr/openrc-base/device-mapper.conf-1.02.22-r3 deleted file mode 100644 index bc7a25158..000000000 --- a/pcr/openrc-base/device-mapper.conf-1.02.22-r3 +++ /dev/null @@ -1 +0,0 @@ -RC_AFTER="lvm" diff --git a/pcr/openrc-base/device-mapper.rc-2.02.105-r2 b/pcr/openrc-base/device-mapper.rc-2.02.105-r2 deleted file mode 100644 index 56e75037e..000000000 --- a/pcr/openrc-base/device-mapper.rc-2.02.105-r2 +++ /dev/null @@ -1,147 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ - -depend() { - # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that - # means dmeventd is NOT notified, as it cannot be safely running - before dmeventd checkfs fsck - after modules -} - -dm_in_proc() { - local retval=0 - for x in devices misc ; do - grep -qs 'device-mapper' /proc/${x} - retval=$((${retval} + $?)) - done - return ${retval} -} - -# char **build_dmsetup_command(volume) -# -# Returns complete dmsetup command given single volume name -build_dmsetup_command() { - local count dmsetup_cmd - - # Number of lines mentioning volume name - count=$(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | grep -c ${1}) - - # If there's just one line: - if [ ${count} -eq 1 ] ; then - echo "echo $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ - grep ${1} | awk '{$1=""; print $0}') | /sbin/dmsetup create ${1}" - - # For all cases with more lines: - elif [ ${count} -gt 1 ] ; then - for c in $( seq 1 ${count} ) ; do - if [ ${c} -eq 1 ] ; then - # Heavy escaping in awk-statement because we cannot use apostrophes - dmsetup_cmd="echo -e $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ - grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})" - else - # Append starting with newline - dmsetup_cmd="${dmsetup_cmd}\\\\n \ - $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ - grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})" - fi - done - echo "${dmsetup_cmd} | /sbin/dmsetup create ${1}" - fi - - return 0 -} - -# char **get_new_dm_volumes(void) -# -# Return unique volumes from /etc/dmtab -get_new_dm_volumes() { - local volume - - # Filter comments and blank lines - grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \ - awk '{ print $1 }' | \ - uniq | \ - while read volume ; do - # If it exists, skip it - dmvolume_exists "${volume%:}" && continue - - echo "${volume%:}" - done - - return 0 -} - -# int dmvolume_exists(volume) -# -# Return true if volume exists in DM table -dmvolume_exists() { - local x line volume=$1 - - [ -z "${volume}" ] && return 1 - - /sbin/dmsetup ls 2>/dev/null | \ - while read line ; do - for x in ${line} ; do - # the following conditonal return only breaks out - # of the while loop, as it is running in a pipe. - [ "${x}" = "${volume}" ] && return 1 - # We only want to check the volume name - break - done - done - - # if 1 was returned from the above loop, then indicate that - # volume exists - [ $? = 1 ] && return 0 - - # otherwise the loop exited normally and the volume does not - # exist - return 1 -} - -# int is_empty_dm_volume(volume) -# -# Return true if the volume exists in DM table, but is empty/non-valid -is_empty_dm_volume() { - local table volume=$1 - - set -- $(/sbin/dmsetup table 2>/dev/null | grep -e "^${volume}:") - [ "${volume}" = "$1" -a -z "$2" ] -} - - -start() { - if [ -e /proc/modules ] && ! dm_in_proc ; then - modprobe dm-mod 2>/dev/null - fi - # Ensure the dirs exist for locking and running - checkpath -q -d -m 0700 -o root:root /run/lvm /run/lock/lvm - - local x volume - - if [ -x /sbin/dmsetup -a -c /dev/mapper/control -a -f /etc/dmtab ] ; then - [ -n "$(get_new_dm_volumes)" ] && \ - einfo " Setting up device-mapper volumes:" - - get_new_dm_volumes | \ - while read x ; do - [ -n "${x}" ] || continue - - volume="${x##* }" - - ebegin " Creating volume: ${volume}" - if ! eval $(build_dmsetup_command ${volume}) >/dev/null 2>/dev/null ; then - eend 1 " Error creating volume: ${volume}" - # dmsetup still adds an empty volume in some cases, - # so lets remove it - is_empty_dm_volume "${volume}" && \ - /sbin/dmsetup remove "${volume}" 2>/dev/null - else - eend 0 - fi - done - fi -} - diff --git a/pcr/openrc-base/dhcpcd.initd b/pcr/openrc-base/dhcpcd.initd deleted file mode 100644 index d88b0610d..000000000 --- a/pcr/openrc-base/dhcpcd.initd +++ /dev/null @@ -1,17 +0,0 @@ -#!/sbin/runscript -# Copyright 2007-2008 Roy Marples <roy@marples.name> -# All rights reserved. Released under the 2-clause BSD license. - -command=/sbin/dhcpcd -pidfile=/var/run/dhcpcd.pid -command_args=-q -name="DHCP Client Daemon" - -depend() -{ - provide net - need localmount - use logger network - after bootmisc modules - before dns -} diff --git a/pcr/openrc-base/dmeventd.initd-2.02.67-r1 b/pcr/openrc-base/dmeventd.initd-2.02.67-r1 deleted file mode 100644 index 3c2f5f327..000000000 --- a/pcr/openrc-base/dmeventd.initd-2.02.67-r1 +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1,v 1.3 2014/02/08 21:17:46 robbat2 Exp $ - -PIDFILE=/run/dmeventd.pid -BIN=/sbin/dmeventd - -depend() { - # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that - # means dmeventd is NOT notified, as it cannot be safely running - after lvm device-mapper -} - -start() { - ebegin "Starting dmeventd" - start-stop-daemon --start --exec $BIN --pidfile $PIDFILE - eend $? -} - -stop() { - ebegin "Stopping dmeventd" - start-stop-daemon --stop --exec $BIN --pidfile $PIDFILE - eend $? -} - diff --git a/pcr/openrc-base/eudev.install b/pcr/openrc-base/eudev.install deleted file mode 100644 index 0043774fa..000000000 --- a/pcr/openrc-base/eudev.install +++ /dev/null @@ -1,14 +0,0 @@ -_svc="udev-postmount" -_rlvl="default" - -post_install() { - rc-update add ${_svc} ${_rlvl} -} - -post_upgrade() { - post_install "$1" -} - -pre_remove() { - rc-update del ${_svc} ${_rlvl} -} diff --git a/pcr/openrc-base/inetutils.confd b/pcr/openrc-base/ftpd.confd index df58eab46..df58eab46 100644 --- a/pcr/openrc-base/inetutils.confd +++ b/pcr/openrc-base/ftpd.confd diff --git a/pcr/openrc-base/inetutils.initd b/pcr/openrc-base/ftpd.initd index a53184c4c..a53184c4c 100644 --- a/pcr/openrc-base/inetutils.initd +++ b/pcr/openrc-base/ftpd.initd diff --git a/pcr/openrc-base/lvm-monitoring.initd-2.02.105-r2 b/pcr/openrc-base/lvm-monitoring.initd-2.02.105-r2 deleted file mode 100644 index c53a60465..000000000 --- a/pcr/openrc-base/lvm-monitoring.initd-2.02.105-r2 +++ /dev/null @@ -1,39 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ - -# This script is based on upstream file -# LVM2.2.02.67/scripts/lvm2_monitoring_init_red_hat.in - -depend() { - # As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that - # means dmeventd is NOT notified, as it cannot be safely running - need lvm dmeventd -} - -VGCHANGE=/sbin/vgchange -VGS=/sbin/vgs - -start() { - ret=0 - # TODO do we want to separate out already active groups only? - VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null` - ebegin "Starting LVM monitoring for VGs ${VGSLIST}:" - $VGCHANGE --monitor y --poll y ${VGSLIST} - ret=$? - eend $ret - return $ret - -} - -stop() { - ret=0 - # TODO do we want to separate out already active groups only? - VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null` - ebegin "Stopping LVM monitoring for VGs ${VGSLIST}:" - $VGCHANGE --monitor n ${VGSLIST} - ret=$? - eend $ret - return $ret -} diff --git a/pcr/openrc-base/lvm.confd-2.02.28-r2 b/pcr/openrc-base/lvm.confd-2.02.28-r2 deleted file mode 100644 index 2fbd8668c..000000000 --- a/pcr/openrc-base/lvm.confd-2.02.28-r2 +++ /dev/null @@ -1,5 +0,0 @@ -# LVM should normally only be started after mdraid is available -# this is because LVM physical volumes are very often MD devices. -RC_AFTER="mdraid" - -# vim: ft=gentoo-conf-d diff --git a/pcr/openrc-base/lvm.rc-2.02.105-r2 b/pcr/openrc-base/lvm.rc-2.02.105-r2 deleted file mode 100644 index 7fdf50e18..000000000 --- a/pcr/openrc-base/lvm.rc-2.02.105-r2 +++ /dev/null @@ -1,97 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $ - -depend() { - before checkfs fsck - after modules device-mapper - need lvmetad sysfs -} - -config='global { locking_dir = "/run/lock/lvm" }' - -dm_in_proc() { - local retval=0 - for x in devices misc ; do - grep -qs 'device-mapper' /proc/${x} - retval=$((${retval} + $?)) - done - return ${retval} -} - -start() { - # LVM support for /usr, /home, /opt .... - # This should be done *before* checking local - # volumes, or they never get checked. - - # NOTE: Add needed modules for LVM or RAID, etc - # to /etc/modules.autoload if needed - for lvm_path in /bin/lvm /sbin/lvm ; do - [ -x "$lvm_path" ] && break - done - if [ ! -x "$lvm_path" ]; then - eerror "Cannot find lvm binary in /sbin or /bin!" - return 1 - fi - if [ -z "${CDBOOT}" ] ; then - if [ -e /proc/modules ] && ! dm_in_proc ; then - modprobe dm-mod 2>/dev/null - fi - if [ -d /proc/lvm ] || dm_in_proc ; then - ebegin "Setting up the Logical Volume Manager" - #still echo stderr for debugging - lvm_commands="#! ${lvm_path} --config '${config}'\n" - # Extra PV find pass because some devices might not have been available until very recently - lvm_commands="${lvm_commands}pvscan\n" - # Now make the nodes - lvm_commands="${lvm_commands}vgscan --mknodes\n" - # And turn them on! - lvm_commands="${lvm_commands}vgchange --sysinit -a ly\n" - # Order of this is important, have to work around dash and LVM readline - printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null - eend $? "Failed to setup the LVM" - fi - fi -} - -stop() { - for lvm_path in /bin/lvm /sbin/lvm ; do - [ -x "$lvm_path" ] && break - done - if [ ! -x "$lvm_path" ]; then - eerror "Cannot find lvm binary in /sbin or /bin!" - return 1 - fi -# Stop LVM2 -if [ -x /sbin/vgs ] && \ - [ -x /sbin/vgchange ] && \ - [ -x /sbin/lvchange ] && \ - [ -f /etc/lvmtab -o -d /etc/lvm ] && \ - [ -d /proc/lvm -o "`grep device-mapper /proc/misc 2>/dev/null`" ] -then - einfo "Shutting down the Logical Volume Manager" - - - VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null) - - if [ "$VGS" ] - then - ebegin " Shutting Down LVs & VGs" - #still echo stderr for debugging - lvm_commands="#! ${lvm_path} --config '${config}'\n" - # Extra PV find pass because some devices might not have been available until very recently - lvm_commands="${lvm_commands}lvchange --sysinit -a ln ${VGS}\n" - # Now make the nodes - lvm_commands="${lvm_commands}vgchange --sysinit -a ln ${VGS}\n" - # Order of this is important, have to work around dash and LVM readline - printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null - eend $? "Failed (possibly some LVs still needed for /usr or root)" - fi - - einfo "Finished shutting down the Logical Volume Manager" - return 0 -fi -} - -# vim:ts=4 diff --git a/pcr/openrc-base/lvmetad.initd-2.02.105-r2 b/pcr/openrc-base/lvmetad.initd-2.02.105-r2 deleted file mode 100644 index e16d55c46..000000000 --- a/pcr/openrc-base/lvmetad.initd-2.02.105-r2 +++ /dev/null @@ -1,13 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2,v 1.2 2014/02/08 21:17:46 robbat2 Exp $ - -pidfile="/run/lvmetad.pid" -command="/sbin/lvmetad" -command_args="${LVMETAD_OPTS:=-p ${pidfile}}" -start_stop_daemon_args="--pidfile ${pidfile}" - -depend() { - : -} diff --git a/pcr/openrc-base/mdadm.confd b/pcr/openrc-base/mdadm.confd deleted file mode 100644 index a4ead14dc..000000000 --- a/pcr/openrc-base/mdadm.confd +++ /dev/null @@ -1,7 +0,0 @@ -# /etc/conf.d/mdadm: config file for /etc/init.d/mdadm - -# Misc options to pass to mdadm in monitor mode. -# For more info, run `mdadm --monitor --help` or see -# the mdadm(8) manpage. - -MDADM_OPTS="--syslog" diff --git a/pcr/openrc-base/mdadm.rc b/pcr/openrc-base/mdadm.rc deleted file mode 100644 index c30004d0b..000000000 --- a/pcr/openrc-base/mdadm.rc +++ /dev/null @@ -1,26 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2006 Gentoo Technologies, Inc. -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/mdadm/files/mdadm.rc,v 1.2 2006/04/25 05:41:51 vapier Exp $ - -depend() { - use logger dns net -} - -start() { - ebegin "Starting mdadm monitor" - mdadm --monitor --scan \ - --daemonise \ - --pid-file /var/run/mdadm.pid \ - ${MDADM_OPTS} - eend $? -} - -stop() { - local ret - ebegin "Stopping mdadm monitor" - start-stop-daemon --stop --pidfile /var/run/mdadm.pid - ret=$? - rm -f /var/run/mdadm.pid - eend ${ret} -} diff --git a/pcr/openrc-base/mdraid.confd b/pcr/openrc-base/mdraid.confd deleted file mode 100644 index daa17abd8..000000000 --- a/pcr/openrc-base/mdraid.confd +++ /dev/null @@ -1,5 +0,0 @@ -# /etc/conf.d/mdraid: config file for /etc/init.d/mdraid - -# For people who run raid on top of some other layer (like -# dmcrypt), use rc_need to specify that requirement. See -# the runscript(8) man page for more information. diff --git a/pcr/openrc-base/mdraid.rc b/pcr/openrc-base/mdraid.rc deleted file mode 100644 index 27421e26e..000000000 --- a/pcr/openrc-base/mdraid.rc +++ /dev/null @@ -1,40 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2011 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-fs/mdadm/files/mdraid.rc,v 1.6 2011/11/12 21:06:44 vapier Exp $ - -depend() { - before checkfs fsck - after modules -} - -start() { - local output - - ebegin "Starting up RAID devices" - output=$(mdadm -As 2>&1) - eend $? "${output}" - - local pat="/dev/md_d*" - set -- ${pat} - if [ "$*" != "${pat}" ] ; then - ebegin "Creating RAID device partitions" - blockdev "$@" - eend $? - # wait because vgscan runs next, and we want udev to fire - sleep 1 - fi - - return 0 -} - -stop() { - local output - - # XXX: Maybe drop this check ? - [ ! -e /etc/mdadm/mdadm.conf ] && [ ! -e /etc/mdadm.conf ] && return 0 - - ebegin "Shutting down RAID devices (mdadm)" - output=$(mdadm -Ss 2>&1) - eend $? "${output}" -} diff --git a/pcr/openrc-base/nscd b/pcr/openrc-base/nscd deleted file mode 100644 index b102de070..000000000 --- a/pcr/openrc-base/nscd +++ /dev/null @@ -1,64 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2005 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-libs/glibc/files/nscd,v 1.7 2007/02/23 12:09:39 uberlord Exp $ - -depend() { - use dns ldap net slapd -} - -checkconfig() { - if [ ! -d /var/run/nscd ] ; then - mkdir -p /var/run/nscd - chmod 755 /var/run/nscd - fi - if [ -z "${NSCD_PERMS_OK}" ] && [ "$(stat -c %a /var/run/nscd)" != "755" ] ; then - echo "" - ewarn "nscd run dir is not world readable, you should reset the perms:" - ewarn "chmod 755 /var/run/nscd" - ewarn "chmod a+rw /var/run/nscd/socket" - echo "" - ewarn "To disable this warning, set 'NSCD_PERMS_OK' in /etc/conf.d/nscd" - echo "" - fi -} - -start() { - checkconfig - - ebegin "Starting Name Service Cache Daemon" - local secure=`while read curline ; do - table=${curline%:*} - entries=${curline##$table:} - table=${table%%[^a-z]*} - case $table in - passwd*|group*|hosts) - for entry in $entries ; do - case $entry in - nisplus*) - /usr/sbin/nscd_nischeck $table || \ - /echo "-S $table,yes" - ;; - esac - done - ;; - esac - done < /etc/nsswitch.conf` - local pidfile="$(strings /usr/sbin/nscd | grep nscd.pid)" - mkdir -p "$(dirname ${pidfile})" - save_options pidfile "${pidfile}" - start-stop-daemon --start --quiet \ - --exec /usr/sbin/nscd --pidfile "${pidfile}" \ - -- $secure - eend $? -} - -stop() { - local pidfile="$(get_options pidfile)" - [ -n "${pidfile}" ] && pidfile="--pidfile ${pidfile}" - ebegin "Shutting down Name Service Cache Daemon" - start-stop-daemon --stop --quiet --exec /usr/sbin/nscd ${pidfile} - eend $? -} - -# vim:ts=4 diff --git a/pcr/openrc-base/udev-postmount b/pcr/openrc-base/udev-postmount deleted file mode 100644 index e433736db..000000000 --- a/pcr/openrc-base/udev-postmount +++ /dev/null @@ -1,55 +0,0 @@ -#!/sbin/runscript -# Copyright 1999-2013 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -depend() -{ - need localmount - keyword -vserver -lxc -} - -dir_writeable() -{ - touch "$1"/.test.$$ 2>/dev/null && rm "$1"/.test.$$ -} - -# store persistent-rules that got created while booting -# when / was still read-only -store_persistent_rules() -{ - # create /etc/udev/rules.d if it does not exist and /etc/udev is writable - [ -d /etc/udev/rules.d ] || \ - dir_writeable /etc/udev && \ - mkdir -p /etc/udev/rules.d - - # only continue if rules-directory is writable - dir_writeable /etc/udev/rules.d || return 0 - - local file dest - for file in /run/udev/tmp-rules--*; do - dest=${file##*tmp-rules--} - [ "$dest" = '*' ] && break - type=${dest##70-persistent-} - type=${type%%.rules} - ebegin "Saving udev persistent ${type} rules to /etc/udev/rules.d" - cat "$file" >> /etc/udev/rules.d/"$dest" && rm -f "$file" - eend $? "Failed moving persistent rules!" - done -} - -start() -{ - # check if this system uses udev - [ -d /run/udev ] || return 0 - - # store persistent-rules that got created while booting - # when / was still read-only - store_persistent_rules -} - -stop() -{ - return 0 -} - -# vim:ts=4 |