summaryrefslogtreecommitdiff
path: root/libre
diff options
context:
space:
mode:
Diffstat (limited to 'libre')
-rw-r--r--libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch243
-rw-r--r--libre/uboot4extlinux-am335x_bone/PKGBUILD53
-rw-r--r--libre/uboot4extlinux-am335x_bone/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-am335x_bone/uEnv.txt1
-rw-r--r--libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install37
-rw-r--r--libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch93
-rw-r--r--libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch76
-rw-r--r--libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch31
-rw-r--r--libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch109
-rw-r--r--libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch1685
-rw-r--r--libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch423
-rw-r--r--libre/uboot4extlinux-chiliboard/PKGBUILD62
-rw-r--r--libre/uboot4extlinux-chiliboard/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-chiliboard/uEnv.txt1
-rw-r--r--libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install37
-rw-r--r--libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch312
-rw-r--r--libre/uboot4extlinux-omap3_beagle/PKGBUILD51
-rw-r--r--libre/uboot4extlinux-omap3_beagle/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-omap3_beagle/uEnv.txt0
-rw-r--r--libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install11
-rw-r--r--libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch135
-rw-r--r--libre/uboot4extlinux-omap4_panda/PKGBUILD49
-rw-r--r--libre/uboot4extlinux-omap4_panda/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-omap4_panda/uEnv.txt2
-rw-r--r--libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install26
-rw-r--r--libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch66
-rw-r--r--libre/uboot4extlinux-sunxi/PKGBUILD237
-rw-r--r--libre/uboot4extlinux-sunxi/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install27
-rw-r--r--libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch389
-rw-r--r--libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch97
-rw-r--r--libre/uboot4extlinux-udoo/PKGBUILD69
-rw-r--r--libre/uboot4extlinux-udoo/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install28
-rw-r--r--libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch153
-rw-r--r--libre/uboot4extlinux-wandboard/PKGBUILD46
-rw-r--r--libre/uboot4extlinux-wandboard/extlinux.conf46
-rw-r--r--libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install29
38 files changed, 0 insertions, 4900 deletions
diff --git a/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 0f1c145da..000000000
--- a/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig
---- u-boot-2015.04.orig/configs/am335x_evm_defconfig 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/configs/am335x_evm_defconfig 2016-02-24 12:05:57.627551576 -0300
-@@ -1,7 +1,6 @@
- CONFIG_SPL=y
- CONFIG_SPL_STACK_R=y
- CONFIG_SPL_STACK_R_ADDR=0x82000000
--CONFIG_SYS_EXTRA_OPTIONS="NAND"
--CONFIG_CONS_INDEX=1
-+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
- CONFIG_ARM=y
- CONFIG_TARGET_AM335X_EVM=y
-diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h
---- u-boot-2015.04.orig/include/configs/am335x_evm.h 2015-04-13 11:53:03.000000000 -0300
-+++ u-boot-2015.04/include/configs/am335x_evm.h 2016-02-24 12:09:41.983016704 -0300
-@@ -17,6 +17,7 @@
- #define __CONFIG_AM335X_EVM_H
-
- #include <configs/ti_am335x_common.h>
-+#define CONFIG_ENV_IS_NOWHERE
-
- #ifndef CONFIG_SPL_BUILD
- #ifndef CONFIG_FIT
-@@ -45,6 +46,9 @@
- /* Enhance our eMMC support / experience. */
- #define CONFIG_CMD_GPT
- #define CONFIG_EFI_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_SETEXPR
-
- #ifdef CONFIG_NAND
- #define NANDARGS \
-@@ -67,113 +71,90 @@
-
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- DEFAULT_LINUX_BOOT_ENV \
-- "boot_fdt=try\0" \
-- "bootpart=0:2\0" \
-+ "bootpart=0:1\0" \
- "bootdir=/boot\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "bootfile=zImage\0" \
- "fdtfile=undefined\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "console=ttyO0,115200n8\0" \
- "partitions=" \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- "optargs=\0" \
-- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 ro\0" \
-- "mmcrootfstype=ext4 rootwait\0" \
-- "rootpath=/export/rootfs\0" \
-- "nfsopts=nolock\0" \
-- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-- "::off\0" \
-- "ramroot=/dev/ram0 rw\0" \
-- "ramrootfstype=ext2\0" \
-+ "cape_disable=\0" \
-+ "cape_enable=\0" \
-+ "cmdline=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "spiroot=/dev/mtdblock4 rw\0" \
-- "spirootfstype=jffs2\0" \
-- "spisrcaddr=0xe0000\0" \
-- "spiimgsize=0x362000\0" \
-- "spibusno=0\0" \
-- "spiargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${spiroot} " \
-- "rootfstype=${spirootfstype}\0" \
-- "netargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=/dev/nfs " \
-- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-- "ip=dhcp\0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcloados=run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdtaddr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-- "mmcboot=mmc dev ${mmcdev}; " \
-- "if mmc rescan; then " \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootscript; then " \
-- "run bootscript;" \
-- "else " \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-+ "${cape_disable} " \
-+ "${cape_enable} " \
-+ "root=${root} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "for devnum in 0 1; do " \
-+ "if ${devtype} dev ${devnum}; then " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "gpio set 54;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "if test -n ${cape}; then " \
-+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \
-+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \
-+ "fi; " \
-+ "echo using: $fdtfile...; " \
-+ "fi; " \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "gpio set 55;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "gpio set 56;" \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "gpio clear 54; gpio clear 55;" \
-+ "setexpr devnum ${devnum} + 1;" \
- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadimage; then " \
-- "run mmcloados;" \
-- "fi;" \
-- "fi ;" \
-- "fi;\0" \
-- "spiboot=echo Booting from spi ...; " \
-- "run spiargs; " \
-- "sf probe ${spibusno}:0; " \
-- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
-- "bootz ${loadaddr}\0" \
-- "netboot=echo Booting from network ...; " \
-- "setenv autoload no; " \
-- "dhcp; " \
-- "tftp ${loadaddr} ${bootfile}; " \
-- "tftp ${fdtaddr} ${fdtfile}; " \
-- "run netargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+ "done;" \
-+ "done;\0" \
- "findfdt="\
- "if test $board_name = A335BONE; then " \
-- "setenv fdtfile am335x-bone.dtb; fi; " \
-+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \
- "if test $board_name = A335BNLT; then " \
-- "setenv fdtfile am335x-boneblack.dtb; fi; " \
-+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \
- "if test $board_name = A33515BB; then " \
- "setenv fdtfile am335x-evm.dtb; fi; " \
- "if test $board_name = A335X_SK; then " \
-@@ -185,12 +166,11 @@
- #endif
-
- #define CONFIG_BOOTCOMMAND \
-- "run findfdt; " \
-- "run mmcboot;" \
-- "setenv mmcdev 1; " \
-- "setenv bootpart 1:2; " \
-+ "gpio set 53;" \
-+ "run findfdt;" \
- "run mmcboot;" \
-- "run nandboot;"
-+ "gpio clear 54; gpio clear 55;" \
-+ "gpio set 56"
-
- /* NS16550 Configuration */
- #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-@@ -329,9 +309,8 @@
- #endif
-
- #ifdef CONFIG_MUSB_GADGET
--#define CONFIG_USB_ETHER
--#define CONFIG_USB_ETH_RNDIS
--#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-+#define CONFIG_CMD_USB_MASS_STORAGE
-+#define CONFIG_USB_GADGET_MASS_STORAGE
-
- /* USB TI's IDs */
- #define CONFIG_G_DNL_VENDOR_NUM 0x0451
diff --git a/libre/uboot4extlinux-am335x_bone/PKGBUILD b/libre/uboot4extlinux-am335x_bone/PKGBUILD
deleted file mode 100644
index f1436af02..000000000
--- a/libre/uboot4extlinux-am335x_bone/PKGBUILD
+++ /dev/null
@@ -1,53 +0,0 @@
-# U-Boot: BeagleBone and BeagleBone Black
-# Maintainer: André Silva <emulatorman@parabola.nu>
-# Contributor: Jookia <166291@gmail.com>
-# Contributor: Márcio Silva <coadde@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot4extlinux-am335x_bone
-pkgver=2015.04
-pkgrel=1
-pkgdesc="U-Boot with Extlinux support for BeagleBone and BeagleBone Black"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-replaces=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts'
- 'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck'
- 'uboot-beaglebone' 'uboot-am335x_bone')
-conflicts=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts'
- 'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck'
- 'uboot-beaglebone' 'uboot-am335x_bone' 'uboot4grub-am335x_bone')
-makedepends=('bc')
-license=('GPL')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
- '37784c8f8f52a615d65e775018d237fb'
- '068f6b4e8047115e73f29af5f384889b'
- 'ccb79775b81654e16fca18825c7f2506')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- make distclean
- make am335x_evm_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-am335x_bone/extlinux.conf b/libre/uboot4extlinux-am335x_bone/extlinux.conf
deleted file mode 100644
index 52de94d49..000000000
--- a/libre/uboot4extlinux-am335x_bone/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /boot/vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /boot/vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /boot/vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /boot/vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /boot/vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /boot/vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /boot/vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /boot/vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-am335x_bone/uEnv.txt b/libre/uboot4extlinux-am335x_bone/uEnv.txt
deleted file mode 100644
index f432efc6b..000000000
--- a/libre/uboot4extlinux-am335x_bone/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=coherent_pool=1M
diff --git a/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install b/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install
deleted file mode 100644
index 4467c694e..000000000
--- a/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install
+++ /dev/null
@@ -1,37 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-}
-
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch b/libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
deleted file mode 100644
index bdb6699e6..000000000
--- a/libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 0a3f119b5221e16feb1cbe4036cc16d1dc4c194c Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 7 Feb 2015 22:52:40 +0100
-Subject: [PATCH 1/6] Add linux/compiler-gcc5.h to fix builds with gcc5
-
-Add linux/compiler-gcc5/h from the kernel sources at:
-
-commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
-Author: Steven Noonan <steven@uplinklabs.net>
-Date: Sat Oct 25 15:09:42 2014 -0700
-
- compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 65 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 0000000..c8c5659
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,65 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ in the preprocessor, but we can live with this because they're unreleased.
-+ Maketime probing would be overkill here.
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased. Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
---
-2.5.0
-
diff --git a/libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch b/libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
deleted file mode 100644
index 6ec3d82fc..000000000
--- a/libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From a29b67a36a2b59acfc9cb7adc6e3bc06c490d4ee Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Sun, 22 Jun 2014 23:10:39 +0200
-Subject: [PATCH 2/6] ARM:asm:io.h use static inline
-
-When compiling u-boot with W=1 the extern inline void for
-read* is likely causing the most noise. gcc / clang will
-warn there is never a actual declaration for these functions.
-Instead of declaring these extern make them static inline so
-it is actually declared.
-
-cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
----
- arch/arm/include/asm/io.h | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
-index 214f3ea..dc6138a 100644
---- a/arch/arm/include/asm/io.h
-+++ b/arch/arm/include/asm/io.h
-@@ -77,7 +77,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
- #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
- #define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v))
-
--extern inline void __raw_writesb(unsigned long addr, const void *data,
-+static inline void __raw_writesb(unsigned long addr, const void *data,
- int bytelen)
- {
- uint8_t *buf = (uint8_t *)data;
-@@ -85,7 +85,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
- __arch_putb(*buf++, addr);
- }
-
--extern inline void __raw_writesw(unsigned long addr, const void *data,
-+static inline void __raw_writesw(unsigned long addr, const void *data,
- int wordlen)
- {
- uint16_t *buf = (uint16_t *)data;
-@@ -93,7 +93,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
- __arch_putw(*buf++, addr);
- }
-
--extern inline void __raw_writesl(unsigned long addr, const void *data,
-+static inline void __raw_writesl(unsigned long addr, const void *data,
- int longlen)
- {
- uint32_t *buf = (uint32_t *)data;
-@@ -101,21 +101,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
- __arch_putl(*buf++, addr);
- }
-
--extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
-+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
- {
- uint8_t *buf = (uint8_t *)data;
- while(bytelen--)
- *buf++ = __arch_getb(addr);
- }
-
--extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
-+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
- {
- uint16_t *buf = (uint16_t *)data;
- while(wordlen--)
- *buf++ = __arch_getw(addr);
- }
-
--extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
-+static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
- {
- uint32_t *buf = (uint32_t *)data;
- while(longlen--)
---
-2.5.0
-
diff --git a/libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch b/libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
deleted file mode 100644
index baf1efd5d..000000000
--- a/libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From dc7efb77bbd59224855713a554bb3721568a85c6 Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Thu, 26 Jun 2014 20:18:31 +0200
-Subject: [PATCH 3/6] common: main.c: make show_boot_progress __weak
-
-This not only looks a bit better it also prevents a
-warning with W=1 (no previous prototype).
-
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
-Acked-by: Simon Glass <sjg@chromium.org>
----
- common/main.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/common/main.c b/common/main.c
-index 32618f1..2979fbe 100644
---- a/common/main.c
-+++ b/common/main.c
-@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
- /*
- * Board-specific Platform code can reimplement show_boot_progress () if needed
- */
--void inline __show_boot_progress (int val) {}
--void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
-+__weak void show_boot_progress(int val) {}
-
- static void modem_init(void)
- {
---
-2.5.0
-
diff --git a/libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch b/libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
deleted file mode 100644
index f2237a229..000000000
--- a/libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From ea9b2d003712ae2c6158abb5c9f285f593e8fcb0 Mon Sep 17 00:00:00 2001
-From: Jeroen Hofstee <jeroen@myspectrum.nl>
-Date: Mon, 23 Jun 2014 23:20:19 +0200
-Subject: [PATCH 4/6] common: board_f: cosmetic use __weak for leds
-
-First of all this looks a lot better, but it also
-prevents a gcc warning (W=1), that the weak function
-has no previous prototype.
-
-cc: Simon Glass <sjg@chromium.org>
-Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
-Acked-by: Simon Glass <sjg@chromium.org>
----
- common/board_f.c | 29 ++++++++++-------------------
- include/status_led.h | 22 +++++++++++-----------
- 2 files changed, 21 insertions(+), 30 deletions(-)
-
-diff --git a/common/board_f.c b/common/board_f.c
-index 4ea4cb2..bdab38e 100644
---- a/common/board_f.c
-+++ b/common/board_f.c
-@@ -37,6 +37,7 @@
- #include <os.h>
- #include <post.h>
- #include <spi.h>
-+#include <status_led.h>
- #include <trace.h>
- #include <watchdog.h>
- #include <asm/errno.h>
-@@ -78,25 +79,15 @@ DECLARE_GLOBAL_DATA_PTR;
- ************************************************************************
- * May be supplied by boards if desired
- */
--inline void __coloured_LED_init(void) {}
--void coloured_LED_init(void)
-- __attribute__((weak, alias("__coloured_LED_init")));
--inline void __red_led_on(void) {}
--void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
--inline void __red_led_off(void) {}
--void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
--inline void __green_led_on(void) {}
--void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
--inline void __green_led_off(void) {}
--void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
--inline void __yellow_led_on(void) {}
--void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
--inline void __yellow_led_off(void) {}
--void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
--inline void __blue_led_on(void) {}
--void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
--inline void __blue_led_off(void) {}
--void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
-+__weak void coloured_LED_init(void) {}
-+__weak void red_led_on(void) {}
-+__weak void red_led_off(void) {}
-+__weak void green_led_on(void) {}
-+__weak void green_led_off(void) {}
-+__weak void yellow_led_on(void) {}
-+__weak void yellow_led_off(void) {}
-+__weak void blue_led_on(void) {}
-+__weak void blue_led_off(void) {}
-
- /*
- * Why is gd allocated a register? Prior to reloc it might be better to
-diff --git a/include/status_led.h b/include/status_led.h
-index 0eb91b8..b8aaaf7 100644
---- a/include/status_led.h
-+++ b/include/status_led.h
-@@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state);
- # include <asm/status_led.h>
- #endif
-
-+#endif /* CONFIG_STATUS_LED */
-+
- /*
- * Coloured LEDs API
- */
- #ifndef __ASSEMBLY__
--extern void coloured_LED_init (void);
--extern void red_led_on(void);
--extern void red_led_off(void);
--extern void green_led_on(void);
--extern void green_led_off(void);
--extern void yellow_led_on(void);
--extern void yellow_led_off(void);
--extern void blue_led_on(void);
--extern void blue_led_off(void);
-+void coloured_LED_init(void);
-+void red_led_on(void);
-+void red_led_off(void);
-+void green_led_on(void);
-+void green_led_off(void);
-+void yellow_led_on(void);
-+void yellow_led_off(void);
-+void blue_led_on(void);
-+void blue_led_off(void);
- #else
- .extern LED_init
- .extern red_led_on
-@@ -297,6 +299,4 @@ extern void blue_led_off(void);
- .extern blue_led_off
- #endif
-
--#endif /* CONFIG_STATUS_LED */
--
- #endif /* _STATUS_LED_H_ */
---
-2.5.0
-
diff --git a/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch b/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch
deleted file mode 100644
index cbe029a69..000000000
--- a/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch
+++ /dev/null
@@ -1,1685 +0,0 @@
-From 22efc5d711cf5a91a236b3a54f94cbcad0fc7b5e Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Sat, 29 Aug 2015 08:56:32 -0600
-Subject: [PATCH 5/6] chiliboard support
-
----
- board/grinn/chiliboard/Makefile | 13 +
- board/grinn/chiliboard/board.c | 447 +++++++++++++++++++
- board/grinn/chiliboard/board.h | 20 +
- board/grinn/chiliboard/mux.c | 99 +++++
- board/grinn/chiliboard/u-boot.lds | 131 ++++++
- boards.cfg | 5 +
- drivers/mtd/nand/omap_gpmc.c | 6 +-
- include/configs/chiliboard.h | 878 ++++++++++++++++++++++++++++++++++++++
- 8 files changed, 1597 insertions(+), 2 deletions(-)
- create mode 100644 board/grinn/chiliboard/Makefile
- create mode 100644 board/grinn/chiliboard/board.c
- create mode 100644 board/grinn/chiliboard/board.h
- create mode 100644 board/grinn/chiliboard/mux.c
- create mode 100644 board/grinn/chiliboard/u-boot.lds
- create mode 100644 include/configs/chiliboard.h
-
-diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile
-new file mode 100644
-index 0000000..804ac37
---- /dev/null
-+++ b/board/grinn/chiliboard/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# Makefile
-+#
-+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
-+#
-+# SPDX-License-Identifier: GPL-2.0+
-+#
-+
-+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
-+obj-y := mux.o
-+endif
-+
-+obj-y += board.o
-diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c
-new file mode 100644
-index 0000000..ed8ab63
---- /dev/null
-+++ b/board/grinn/chiliboard/board.c
-@@ -0,0 +1,447 @@
-+/*
-+ * board.c
-+ *
-+ * Board functions for Grinn chiliboard, AM335X based boards
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <errno.h>
-+#include <spl.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/omap.h>
-+#include <asm/arch/ddr_defs.h>
-+#include <asm/arch/clock.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/mmc_host_def.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/mem.h>
-+#include <asm/io.h>
-+#include <asm/emif.h>
-+#include <asm/gpio.h>
-+#include <i2c.h>
-+#include <miiphy.h>
-+#include <cpsw.h>
-+#include <power/tps65217.h>
-+#include <power/tps65910.h>
-+#include <environment.h>
-+#include <watchdog.h>
-+#include <environment.h>
-+#include "board.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+#define HDR_NAME_LEN 8
-+
-+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-+
-+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+static const struct ddr_data ddr2_chilisom_gcs1_data = {
-+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
-+ (MT47H128M16RT25E_RD_DQS<<20) |
-+ (MT47H128M16RT25E_RD_DQS<<10) |
-+ (MT47H128M16RT25E_RD_DQS<<0)),
-+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
-+ (MT47H128M16RT25E_WR_DQS<<20) |
-+ (MT47H128M16RT25E_WR_DQS<<10) |
-+ (MT47H128M16RT25E_WR_DQS<<0)),
-+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
-+ (MT47H128M16RT25E_PHY_WRLVL<<20) |
-+ (MT47H128M16RT25E_PHY_WRLVL<<10) |
-+ (MT47H128M16RT25E_PHY_WRLVL<<0)),
-+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
-+ (MT47H128M16RT25E_PHY_GATELVL<<20) |
-+ (MT47H128M16RT25E_PHY_GATELVL<<10) |
-+ (MT47H128M16RT25E_PHY_GATELVL<<0)),
-+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
-+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
-+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
-+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
-+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
-+ (MT47H128M16RT25E_PHY_WR_DATA<<20) |
-+ (MT47H128M16RT25E_PHY_WR_DATA<<10) |
-+ (MT47H128M16RT25E_PHY_WR_DATA<<0)),
-+};
-+
-+static const struct cmd_control ddr2_chilisom_gcs1_cmd_ctrl_data = {
-+ .cmd0csratio = MT47H128M16RT25E_RATIO,
-+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
-+
-+ .cmd1csratio = MT47H128M16RT25E_RATIO,
-+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
-+
-+ .cmd2csratio = MT47H128M16RT25E_RATIO,
-+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
-+};
-+
-+static const struct emif_regs ddr2_chilisom_gcs1_emif_reg_data = {
-+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
-+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
-+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
-+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
-+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
-+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
-+};
-+
-+static const struct ddr_data ddr3_chilisom_gcs2_data = {
-+ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
-+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
-+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
-+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
-+};
-+
-+static const struct cmd_control ddr3_chilisom_gcs2_cmd_ctrl_data = {
-+ .cmd0csratio = MT41K256M16HA125E_RATIO,
-+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-+
-+ .cmd1csratio = MT41K256M16HA125E_RATIO,
-+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-+
-+ .cmd2csratio = MT41K256M16HA125E_RATIO,
-+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
-+};
-+
-+static struct emif_regs ddr3_chilisom_gcs2_emif_reg_data = {
-+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
-+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
-+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
-+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
-+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
-+ .zq_config = MT41K256M16HA125E_ZQ_CFG,
-+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
-+};
-+
-+#ifdef CONFIG_SPL_OS_BOOT
-+int spl_start_uboot(void)
-+{
-+ /* break into full u-boot on 'c' */
-+ if (serial_tstc() && serial_getc() == 'c')
-+ return 1;
-+
-+#ifdef CONFIG_SPL_ENV_SUPPORT
-+ env_init();
-+ env_relocate_spec();
-+ if (getenv_yesno("boot_os") != 1)
-+ return 1;
-+#endif
-+
-+ return 0;
-+}
-+#endif
-+
-+#define OSC (V_OSCK/1000000)
-+const struct dpll_params dpll_ddr_chilisom_gcs1 = {
-+ 266, OSC-1, 1, -1, -1, -1, -1};
-+const struct dpll_params dpll_ddr_chilisom_gcs2 = {
-+ 400, OSC-1, 1, -1, -1, -1, -1};
-+
-+void am33xx_spl_board_init(void)
-+{
-+ int mpu_vdd;
-+
-+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
-+
-+ int usb_cur_lim;
-+
-+ if (i2c_probe(TPS65217_CHIP_PM))
-+ return;
-+
-+ uchar pmic_status_reg;
-+ if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg))
-+ return;
-+ if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) {
-+ puts("No AC power, disabling frequency switch\n");
-+ return;
-+ }
-+
-+ /*
-+ * Increase USB current limit to 1300mA or 1800mA and set
-+ * the MPU voltage controller as needed.
-+ */
-+ if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
-+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
-+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
-+ } else {
-+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
-+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
-+ }
-+
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
-+ TPS65217_POWER_PATH,
-+ usb_cur_lim,
-+ TPS65217_USB_INPUT_CUR_LIMIT_MASK))
-+ puts("tps65217_reg_write failure\n");
-+
-+ /* Set DCDC3 (CORE) voltage to 1.125V */
-+ if (tps65217_voltage_update(TPS65217_DEFDCDC3,
-+ TPS65217_DCDC_VOLT_SEL_1125MV)) {
-+ puts("tps65217_voltage_update failure\n");
-+ return;
-+ }
-+
-+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
-+ if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
-+ puts("tps65217_voltage_update failure\n");
-+ return;
-+ }
-+
-+ /* Set LDO3, LDO4 output voltage to 3.3V for GCS1.
-+ * Set LDO3 to 1.8V and LDO4 to 3.3V for GCS2. */
-+
-+ #ifdef CONFIG_CHILISOM_GCS2
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS1,
-+ TPS65217_LDO_VOLTAGE_OUT_1_8,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS2,
-+ TPS65217_LDO_VOLTAGE_OUT_3_3,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ #else
-+
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS1,
-+ TPS65217_LDO_VOLTAGE_OUT_3_3,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
-+ TPS65217_DEFLS2,
-+ TPS65217_LDO_VOLTAGE_OUT_3_3,
-+ TPS65217_LDO_MASK))
-+ puts("tps65217_reg_write failure\n");
-+ #endif
-+
-+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
-+}
-+
-+const struct dpll_params *get_dpll_ddr_params(void)
-+{
-+ enable_i2c0_pin_mux();
-+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
-+
-+#ifndef CONFIG_CHILISOM_GCS2
-+ return &dpll_ddr_chilisom_gcs1;
-+#else
-+ return &dpll_ddr_chilisom_gcs2;
-+#endif
-+}
-+
-+void set_uart_mux_conf(void)
-+{
-+#ifdef CONFIG_SERIAL1
-+ enable_uart0_pin_mux();
-+#endif /* CONFIG_SERIAL1 */
-+}
-+
-+void set_mux_conf_regs(void)
-+{
-+ enable_board_pin_mux();
-+}
-+
-+const struct ctrl_ioregs ioregs_chilisom_gcs1 = {
-+ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
-+};
-+
-+const struct ctrl_ioregs ioregs_chilisom_gcs2 = {
-+ .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+ .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
-+};
-+
-+void sdram_init(void)
-+{
-+#ifndef CONFIG_CHILISOM_GCS2
-+ config_ddr(266, &ioregs_chilisom_gcs1,
-+ &ddr2_chilisom_gcs1_data,
-+ &ddr2_chilisom_gcs1_cmd_ctrl_data,
-+ &ddr2_chilisom_gcs1_emif_reg_data, 0);
-+#else
-+ config_ddr(400, &ioregs_chilisom_gcs2,
-+ &ddr3_chilisom_gcs2_data,
-+ &ddr3_chilisom_gcs2_cmd_ctrl_data,
-+ &ddr3_chilisom_gcs2_emif_reg_data, 0);
-+#endif
-+}
-+#endif
-+
-+/*
-+ * Basic board specific setup. Pinmux has been handled already.
-+ */
-+int board_init(void)
-+{
-+#if defined(CONFIG_HW_WATCHDOG)
-+ hw_watchdog_init();
-+#endif
-+
-+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-+#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
-+ gpmc_init();
-+#endif
-+ return 0;
-+}
-+
-+#ifdef CONFIG_BOARD_LATE_INIT
-+int board_late_init(void)
-+{
-+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-+ char safe_string[HDR_NAME_LEN + 1];
-+
-+ /* Now set variables based on the header. */
-+ strncpy(safe_string, (char *)"CHILISOM", 8);
-+ safe_string[8] = 0;
-+ setenv("board_name", safe_string);
-+
-+#ifndef CONFIG_CHILISOM_GCS2
-+ strncpy(safe_string, (char *)"1.1", 3);
-+ safe_string[3] = 0;
-+ setenv("board_rev", safe_string);
-+#else
-+ strncpy(safe_string, (char *)"2.2", 3);
-+ safe_string[3] = 0;
-+ setenv("board_rev", safe_string);
-+#endif
-+#endif
-+ return 0;
-+}
-+#endif
-+
-+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
-+static void cpsw_control(int enabled)
-+{
-+ /* VTP can be added here */
-+
-+ return;
-+}
-+
-+static struct cpsw_slave_data cpsw_slaves[] = {
-+ {
-+ .slave_reg_ofs = 0x208,
-+ .sliver_reg_ofs = 0xd80,
-+ .phy_addr = 0,
-+ },
-+ {
-+ .slave_reg_ofs = 0x308,
-+ .sliver_reg_ofs = 0xdc0,
-+ .phy_addr = 1,
-+ },
-+};
-+
-+static struct cpsw_platform_data cpsw_data = {
-+ .mdio_base = CPSW_MDIO_BASE,
-+ .cpsw_base = CPSW_BASE,
-+ .mdio_div = 0xff,
-+ .channels = 8,
-+ .cpdma_reg_ofs = 0x800,
-+ .slaves = 1,
-+ .slave_data = cpsw_slaves,
-+ .ale_reg_ofs = 0xd00,
-+ .ale_entries = 1024,
-+ .host_port_reg_ofs = 0x108,
-+ .hw_stats_reg_ofs = 0x900,
-+ .bd_ram_ofs = 0x2000,
-+ .mac_control = (1 << 5),
-+ .control = cpsw_control,
-+ .host_port_num = 0,
-+ .version = CPSW_CTRL_VERSION_2,
-+};
-+#endif
-+
-+/*
-+ * This function will:
-+ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr
-+ * in the environment
-+ * Perform fixups to the PHY present on certain boards. We only need this
-+ * function in:
-+ * - SPL with either CPSW or USB ethernet support
-+ * - Full U-Boot, with either CPSW or USB ethernet
-+ * Build in only these cases to avoid warnings about unused variables
-+ * when we build an SPL that has neither option but full U-Boot will.
-+ */
-+
-+#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
-+ && defined(CONFIG_SPL_BUILD)) || \
-+ ((defined(CONFIG_DRIVER_TI_CPSW) || \
-+ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
-+ !defined(CONFIG_SPL_BUILD))
-+int board_eth_init(bd_t *bis)
-+{
-+ int rv, n = 0;
-+ uint8_t mac_addr[6];
-+ uint32_t mac_hi, mac_lo;
-+
-+ /* try reading mac address from efuse */
-+ mac_lo = readl(&cdev->macid0l);
-+ mac_hi = readl(&cdev->macid0h);
-+ mac_addr[0] = mac_hi & 0xFF;
-+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-+ mac_addr[4] = mac_lo & 0xFF;
-+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-+
-+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
-+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
-+ if (!getenv("ethaddr")) {
-+ printf("<ethaddr> not set. Validating first E-fuse MAC\n");
-+
-+ if (is_valid_ether_addr(mac_addr))
-+ eth_setenv_enetaddr("ethaddr", mac_addr);
-+ }
-+
-+#ifdef CONFIG_DRIVER_TI_CPSW
-+
-+ mac_lo = readl(&cdev->macid1l);
-+ mac_hi = readl(&cdev->macid1h);
-+ mac_addr[0] = mac_hi & 0xFF;
-+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-+ mac_addr[4] = mac_lo & 0xFF;
-+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-+
-+ if (!getenv("eth1addr")) {
-+ if (is_valid_ether_addr(mac_addr))
-+ eth_setenv_enetaddr("eth1addr", mac_addr);
-+ }
-+
-+ /* writel(MII_MODE_ENABLE, &cdev->miisel); */
-+ writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
-+
-+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII;
-+
-+ rv = cpsw_register(&cpsw_data);
-+ if (rv < 0)
-+ printf("Error %d registering CPSW switch\n", rv);
-+ else
-+ n += rv;
-+#endif
-+#endif
-+#if defined(CONFIG_USB_ETHER) && \
-+ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
-+ if (is_valid_ether_addr(mac_addr))
-+ eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
-+
-+ rv = usb_eth_initialize(bis);
-+ if (rv < 0)
-+ printf("Error %d registering USB_ETHER\n", rv);
-+ else
-+ n += rv;
-+#endif
-+ return n;
-+}
-+#endif
-diff --git a/board/grinn/chiliboard/board.h b/board/grinn/chiliboard/board.h
-new file mode 100644
-index 0000000..6753e74
---- /dev/null
-+++ b/board/grinn/chiliboard/board.h
-@@ -0,0 +1,20 @@
-+/*
-+ * board.h
-+ *
-+ * Grinn AM335x boards information header
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _BOARD_H_
-+#define _BOARD_H_
-+
-+void enable_uart0_pin_mux(void);
-+void enable_i2c0_pin_mux(void);
-+void enable_board_pin_mux(void);
-+#endif
-diff --git a/board/grinn/chiliboard/mux.c b/board/grinn/chiliboard/mux.c
-new file mode 100644
-index 0000000..644f211
---- /dev/null
-+++ b/board/grinn/chiliboard/mux.c
-@@ -0,0 +1,99 @@
-+/*
-+ * mux.c
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/mux.h>
-+#include <asm/io.h>
-+#include <i2c.h>
-+#include "board.h"
-+
-+static struct module_pin_mux uart0_pin_mux[] = {
-+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
-+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
-+ {-1},
-+};
-+
-+static struct module_pin_mux mmc0_pin_mux[] = {
-+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
-+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
-+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
-+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
-+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
-+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
-+ {-1},
-+};
-+
-+static struct module_pin_mux i2c0_pin_mux[] = {
-+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
-+ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
-+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
-+ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
-+ {-1},
-+};
-+
-+static struct module_pin_mux rmii1_pin_mux[] = {
-+ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */
-+ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */
-+ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */
-+ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */
-+ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */
-+ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */
-+ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */
-+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
-+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
-+ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */
-+ {-1},
-+};
-+
-+static struct module_pin_mux nand_pin_mux[] = {
-+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
-+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
-+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
-+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
-+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
-+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
-+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
-+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
-+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
-+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
-+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
-+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
-+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
-+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
-+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
-+ {-1},
-+};
-+
-+void enable_uart0_pin_mux(void)
-+{
-+ configure_module_pin_mux(uart0_pin_mux);
-+}
-+
-+void enable_i2c0_pin_mux(void)
-+{
-+ configure_module_pin_mux(i2c0_pin_mux);
-+}
-+
-+void enable_board_pin_mux(void)
-+{
-+ /* chiliboard pinmux */
-+ configure_module_pin_mux(rmii1_pin_mux);
-+ configure_module_pin_mux(nand_pin_mux);
-+ configure_module_pin_mux(mmc0_pin_mux);
-+
-+#ifndef CONFIG_CHILISOM_GCS2
-+ puts("Configuration for Chilisom GCS1\n");
-+#else
-+ puts("Configuration for Chilisom GCS2\n");
-+#endif
-+}
-diff --git a/board/grinn/chiliboard/u-boot.lds b/board/grinn/chiliboard/u-boot.lds
-new file mode 100644
-index 0000000..bf70d88
---- /dev/null
-+++ b/board/grinn/chiliboard/u-boot.lds
-@@ -0,0 +1,131 @@
-+/*
-+ * Copyright (c) 2004-2008 Texas Instruments
-+ *
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ *(.__image_copy_start)
-+ *(.vectors)
-+ CPUDIR/start.o (.text*)
-+ board/grinn/chiliboard/built-in.o (.text*)
-+ *(.text*)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-+
-+ . = ALIGN(4);
-+ .data : {
-+ *(.data*)
-+ }
-+
-+ . = ALIGN(4);
-+
-+ . = .;
-+
-+ . = ALIGN(4);
-+ .u_boot_list : {
-+ KEEP(*(SORT(.u_boot_list*)));
-+ }
-+
-+ . = ALIGN(4);
-+
-+ .image_copy_end :
-+ {
-+ *(.__image_copy_end)
-+ }
-+
-+ .rel_dyn_start :
-+ {
-+ *(.__rel_dyn_start)
-+ }
-+
-+ .rel.dyn : {
-+ *(.rel*)
-+ }
-+
-+ .rel_dyn_end :
-+ {
-+ *(.__rel_dyn_end)
-+ }
-+
-+ .hash : { *(.hash*) }
-+
-+ .end :
-+ {
-+ *(.__end)
-+ }
-+
-+ _image_binary_end = .;
-+
-+ /*
-+ * Deprecated: this MMU section is used by pxa at present but
-+ * should not be used by new boards/CPUs.
-+ */
-+ . = ALIGN(4096);
-+ .mmutable : {
-+ *(.mmutable)
-+ }
-+
-+/*
-+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
-+ * __bss_base and __bss_limit are for linker only (overlay ordering)
-+ */
-+
-+ .bss_start __rel_dyn_start (OVERLAY) : {
-+ KEEP(*(.__bss_start));
-+ __bss_base = .;
-+ }
-+
-+ .bss __bss_base (OVERLAY) : {
-+ *(.bss*)
-+ . = ALIGN(4);
-+ __bss_limit = .;
-+ }
-+
-+ .bss_end __bss_limit (OVERLAY) : {
-+ KEEP(*(.__bss_end));
-+ }
-+
-+ .dynsym _image_binary_end : { *(.dynsym) }
-+ .dynbss : { *(.dynbss) }
-+ .dynstr : { *(.dynstr*) }
-+ .dynamic : { *(.dynamic*) }
-+ .gnu.hash : { *(.gnu.hash) }
-+ .plt : { *(.plt*) }
-+ .interp : { *(.interp*) }
-+ .gnu : { *(.gnu*) }
-+ .ARM.exidx : { *(.ARM.exidx*) }
-+}
-diff --git a/boards.cfg b/boards.cfg
-index 1ba2081..b432704 100644
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -258,6 +258,11 @@ Active arm armv7 am33xx BuR tseries
- Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier <hannes.petermaier@br-automation.com>
- Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier <hannes.petermaier@br-automation.com>
- Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg <grinberg@compulab.co.il>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_ram128m chiliboard:CHILISOM_GCS2,NAND,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m_ram128m chiliboard:CHILISOM_GCS2,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_nand512m chiliboard:CHILISOM_GCS2,NAND,NAND512MB Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m chiliboard:CHILISOM_GCS2 Grzegorz Glomb <g.glomb@grinn-global.com>
-+Active arm armv7 am33xx grinn chiliboard chiliboard chiliboard:CHILISOM_GCS2,NAND Grzegorz Glomb <g.glomb@grinn-global.com>
- Active arm armv7 am33xx gumstix pepper pepper - Ash Charles <ash@gumstix.com>
- Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
- Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de>
-diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
-index 1acf06b..0c9cde3 100644
---- a/drivers/mtd/nand/omap_gpmc.c
-+++ b/drivers/mtd/nand/omap_gpmc.c
-@@ -478,11 +478,13 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
- oob += eccbytes) {
- chip->ecc.hwctl(mtd, NAND_ECC_READ);
- /* read data */
-- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page);
-+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1);
- chip->read_buf(mtd, p, eccsize);
-
- /* read respective ecc from oob area */
-- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page);
-+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); */
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
- chip->read_buf(mtd, oob, eccbytes);
- /* read syndrome */
- chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
-new file mode 100644
-index 0000000..eacc9af
---- /dev/null
-+++ b/include/configs/chiliboard.h
-@@ -0,0 +1,878 @@
-+/*
-+ * chiliboard.h
-+ *
-+ * Grinn chiliboard configuration header
-+ *
-+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
-+ *
-+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
-+ * Grzegorz Glomb, g.glomb@grinn-global.com
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __CONFIG_CHILIBOARD_H
-+#define __CONFIG_CHILIBOARD_H
-+
-+#define CONFIG_AM33XX
-+#define CONFIG_ARCH_CPU_INIT
-+#define CONFIG_SYS_CACHELINE_SIZE 64
-+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
-+#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
-+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
-+
-+#include <asm/arch/omap.h>
-+
-+/* NS16550 Configuration */
-+#define CONFIG_SYS_NS16550
-+#define CONFIG_SYS_NS16550_SERIAL
-+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-+#define CONFIG_SYS_NS16550_CLK 48000000
-+
-+/* Network defines. */
-+#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_MII
-+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
-+#define CONFIG_BOOTP_DNS2
-+#define CONFIG_BOOTP_SEND_HOSTNAME
-+#define CONFIG_BOOTP_GATEWAY
-+#define CONFIG_BOOTP_SUBNETMASK
-+#define CONFIG_NET_RETRY_COUNT 10
-+#define CONFIG_CMD_PING
-+#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
-+#define CONFIG_MII /* Required in net/eth.c */
-+
-+/*
-+ * RTC related defines. To use bootcount you must set bootlimit in the
-+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
-+ * in the board config.
-+ */
-+#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
-+
-+/* Enable the HW watchdog, since we can use this with bootcount */
-+#define CONFIG_HW_WATCHDOG
-+#define CONFIG_OMAP_WATCHDOG
-+
-+/*
-+ * SPL related defines. The Public RAM memory map the ROM defines the
-+ * area between 0x402F0400 and 0x4030B800 as a download area and
-+ * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
-+ * supports X-MODEM loading via UART, and we leverage this and then use
-+ * Y-MODEM to load u-boot.img, when booted over UART.
-+ */
-+#define CONFIG_SPL_TEXT_BASE 0x402F0400
-+#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
-+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
-+ (128 << 20))
-+
-+/* Enable the watchdog inside of SPL */
-+#define CONFIG_SPL_WATCHDOG_SUPPORT
-+
-+/*
-+ * Since SPL did pll and ddr initialization for us,
-+ * we don't need to do it twice.
-+ */
-+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#endif
-+
-+/*
-+ * When building U-Boot such that there is no previous loader
-+ * we need to call board_early_init_f. This is taken care of in
-+ * s_init when we have SPL used.
-+ */
-+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
-+#define CONFIG_BOARD_EARLY_INIT_F
-+#endif
-+
-+#ifdef CONFIG_NAND
-+#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
-+#endif
-+
-+/* Common define for many platforms. */
-+#define CONFIG_OMAP
-+#define CONFIG_OMAP_COMMON
-+#define CONFIG_SYS_GENERIC_BOARD
-+
-+/*
-+ * We typically do not contain NOR flash. In the cases where we do, we
-+ * undefine this later.
-+ */
-+#define CONFIG_SYS_NO_FLASH
-+
-+/* Support both device trees and ATAGs. */
-+#define CONFIG_OF_LIBFDT
-+#define CONFIG_CMDLINE_TAG
-+#define CONFIG_SETUP_MEMORY_TAGS
-+#define CONFIG_INITRD_TAG
-+
-+/*
-+ * Our DDR memory always starts at 0x80000000 and U-Boot shall have
-+ * relocated itself to higher in memory by the time this value is used.
-+ * However, set this to a 32MB offset to allow for easier Linux kernel
-+ * booting as the default is often used as the kernel load address.
-+ */
-+#define CONFIG_SYS_LOAD_ADDR 0x82000000
-+
-+/*
-+ * We setup defaults based on constraints from the Linux kernel, which should
-+ * also be safe elsewhere. We have the default load at 32MB into DDR (for
-+ * the kernel), FDT above 128MB (the maximum location for the end of the
-+ * kernel), and the ramdisk 512KB above that (allowing for hopefully never
-+ * seen large trees). We say all of this must be within the first 256MB
-+ * as that will normally be within the kernel lowmem and thus visible via
-+ * bootm_size and we only run on platforms with 256MB or more of memory.
-+ */
-+#ifdef CONFIG_RAM128MB
-+#define DEFAULT_LINUX_BOOT_ENV \
-+ "loadaddr=0x82000000\0" \
-+ "kernel_addr_r=0x82000000\0" \
-+ "fdtaddr=0x84000000\0" \
-+ "fdt_addr_r=0x84000000\0" \
-+ "rdaddr=0x84080000\0" \
-+ "ramdisk_addr_r=0x84080000\0" \
-+ "bootm_size=0x8000000\0"
-+#else
-+#define DEFAULT_LINUX_BOOT_ENV \
-+ "loadaddr=0x82000000\0" \
-+ "kernel_addr_r=0x82000000\0" \
-+ "fdtaddr=0x88000000\0" \
-+ "fdt_addr_r=0x88000000\0" \
-+ "rdaddr=0x88080000\0" \
-+ "ramdisk_addr_r=0x88080000\0" \
-+ "bootm_size=0x10000000\0"
-+#endif
-+
-+/*
-+ * Default to a quick boot delay.
-+ */
-+#define CONFIG_BOOTDELAY 1
-+
-+/*
-+ * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
-+ * we say (for simplicity) that we have 1 bank, always, even when
-+ * we have more. We always start at 0x80000000, and we place the
-+ * initial stack pointer in our SRAM. Otherwise, we can define
-+ * CONFIG_NR_DRAM_BANKS before including this file.
-+ */
-+#ifndef CONFIG_NR_DRAM_BANKS
-+#define CONFIG_NR_DRAM_BANKS 1
-+#endif
-+#define CONFIG_SYS_SDRAM_BASE 0x80000000
-+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
-+ GENERATED_GBL_DATA_SIZE)
-+
-+/* Timer information. */
-+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
-+
-+/* I2C IP block */
-+#define CONFIG_I2C
-+#define CONFIG_CMD_I2C
-+#define CONFIG_SYS_I2C
-+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-+#define CONFIG_SYS_I2C_OMAP24XX
-+
-+/* MMC/SD IP block */
-+#define CONFIG_MMC
-+#define CONFIG_GENERIC_MMC
-+#define CONFIG_OMAP_HSMMC
-+#define CONFIG_CMD_MMC
-+
-+/* McSPI IP block */
-+#define CONFIG_SPI
-+#define CONFIG_OMAP3_SPI
-+#define CONFIG_CMD_SPI
-+
-+/* GPIO block */
-+#define CONFIG_OMAP_GPIO
-+#define CONFIG_CMD_GPIO
-+
-+/*
-+ * GPMC NAND block. We support 1 device and the physical address to
-+ * access CS0 at is 0x8000000.
-+ */
-+#ifdef CONFIG_NAND
-+#define CONFIG_NAND_OMAP_GPMC
-+#ifndef CONFIG_SYS_NAND_BASE
-+#define CONFIG_SYS_NAND_BASE 0x8000000
-+#endif
-+#define CONFIG_SYS_MAX_NAND_DEVICE 1
-+#define CONFIG_CMD_NAND
-+#endif
-+
-+/*
-+ * The following are general good-enough settings for U-Boot. We set a
-+ * large malloc pool as we generally have a lot of DDR, and we opt for
-+ * function over binary size in the main portion of U-Boot as this is
-+ * generally easily constrained later if needed. We enable the config
-+ * options that give us information in the environment about what board
-+ * we are on so we do not need to rely on the command prompt. We set a
-+ * console baudrate of 115200 and use the default baud rate table.
-+ */
-+#define CONFIG_SYS_MALLOC_LEN (16 << 20)
-+#define CONFIG_SYS_HUSH_PARSER
-+#define CONFIG_SYS_PROMPT "U-Boot# "
-+#define CONFIG_SYS_CONSOLE_INFO_QUIET
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
-+#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
-+
-+/* As stated above, the following choices are optional. */
-+#define CONFIG_SYS_LONGHELP
-+#define CONFIG_AUTO_COMPLETE
-+#define CONFIG_CMDLINE_EDITING
-+#define CONFIG_VERSION_VARIABLE
-+
-+/* We set the max number of command args high to avoid HUSH bugs. */
-+#define CONFIG_SYS_MAXARGS 64
-+
-+/* Console I/O Buffer Size */
-+#define CONFIG_SYS_CBSIZE 512
-+/* Print Buffer Size */
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
-+ + sizeof(CONFIG_SYS_PROMPT) + 16)
-+/* Boot Argument Buffer Size */
-+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-+
-+/*
-+ * When we have SPI, NOR or NAND flash we expect to be making use of
-+ * mtdparts, both for ease of use in U-Boot and for passing information
-+ * on to the Linux kernel.
-+ */
-+#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND)
-+#define CONFIG_MTD_DEVICE /* Required for mtdparts */
-+#define CONFIG_CMD_MTDPARTS
-+#endif
-+
-+/*
-+ * For commands to use, we take the default list and add a few other
-+ * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH
-+ * prior to this include, in order to skip a few commands. When we do
-+ * have flash, if we expect these commands they must be enabled in that
-+ * config. If desired, a specific list of desired commands can be used
-+ * instead.
-+ */
-+#include <config_cmd_default.h>
-+#define CONFIG_CMD_ASKENV
-+#define CONFIG_CMD_ECHO
-+#define CONFIG_CMD_BOOTZ
-+
-+/*
-+ * Common filesystems support. When we have removable storage we
-+ * enabled a number of useful commands and support.
-+ */
-+#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-+#define CONFIG_DOS_PARTITION
-+#define CONFIG_CMD_FAT
-+#define CONFIG_FAT_WRITE
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
-+#endif
-+
-+/*
-+ * Our platforms make use of SPL to initalize the hardware (primarily
-+ * memory) enough for full U-Boot to be loaded. We also support Falcon
-+ * Mode so that the Linux kernel can be booted directly from SPL
-+ * instead, if desired. We make use of the general SPL framework found
-+ * under common/spl/. Given our generally common memory map, we set a
-+ * number of related defaults and sizes here.
-+ */
-+#if !defined(CONFIG_NOR_BOOT) && \
-+ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
-+#define CONFIG_SPL
-+#define CONFIG_SPL_FRAMEWORK
-+#define CONFIG_SPL_OS_BOOT
-+
-+/*
-+ * Place the image at the start of the ROM defined image space.
-+ * We limit our size to the ROM-defined downloaded image area, and use the
-+ * rest of the space for stack. We load U-Boot itself into memory at
-+ * 0x80800000 for legacy reasons (to not conflict with older SPLs). We
-+ * have our BSS be placed 1MiB after this, to allow for the default
-+ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case.
-+ * We have the SPL malloc pool at the end of the BSS area.
-+ */
-+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-+#ifndef CONFIG_SYS_TEXT_BASE
-+#define CONFIG_SYS_TEXT_BASE 0x80800000
-+#endif
-+#ifndef CONFIG_SPL_BSS_START_ADDR
-+#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
-+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-+#endif
-+#ifndef CONFIG_SYS_SPL_MALLOC_START
-+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
-+ CONFIG_SPL_BSS_MAX_SIZE)
-+#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
-+#endif
-+
-+/* RAW SD card / eMMC locations. */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-+
-+/* FAT sd card locations. */
-+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
-+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
-+
-+#ifdef CONFIG_SPL_OS_BOOT
-+/* FAT */
-+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
-+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
-+
-+/* RAW SD card / eMMC */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
-+
-+/* NAND */
-+#ifdef CONFIG_NAND
-+#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
-+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
-+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
-+#endif
-+
-+/* spl export command */
-+#define CONFIG_CMD_SPL
-+#endif
-+
-+#ifdef CONFIG_MMC
-+#define CONFIG_SPL_LIBDISK_SUPPORT
-+#define CONFIG_SPL_MMC_SUPPORT
-+#define CONFIG_SPL_FAT_SUPPORT
-+#endif
-+
-+/* General parts of the framework, required. */
-+#define CONFIG_SPL_I2C_SUPPORT
-+#define CONFIG_SPL_LIBCOMMON_SUPPORT
-+#define CONFIG_SPL_LIBGENERIC_SUPPORT
-+#define CONFIG_SPL_SERIAL_SUPPORT
-+#define CONFIG_SPL_GPIO_SUPPORT
-+#define CONFIG_SPL_BOARD_INIT
-+
-+#ifdef CONFIG_NAND
-+#define CONFIG_SPL_NAND_SUPPORT
-+#define CONFIG_SPL_NAND_BASE
-+#define CONFIG_SPL_NAND_DRIVERS
-+#define CONFIG_SPL_NAND_ECC
-+#define CONFIG_SPL_MTD_SUPPORT
-+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-+/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ /* Defined later in this configuration */
-+#endif
-+#endif /* !CONFIG_NOR_BOOT */
-+
-+#ifndef CONFIG_SPL_BUILD
-+# define CONFIG_FIT
-+# define CONFIG_TIMESTAMP
-+# define CONFIG_LZO
-+# ifdef CONFIG_ENABLE_VBOOT
-+# define CONFIG_OF_CONTROL
-+# define CONFIG_OF_SEPARATE
-+# define CONFIG_DEFAULT_DEVICE_TREE am335x-chiliboard
-+# define CONFIG_FIT_SIGNATURE
-+# define CONFIG_RSA
-+# endif
-+#endif
-+
-+#define CONFIG_SYS_BOOTM_LEN (16 << 20)
-+
-+#define CONFIG_BOARD_LATE_INIT
-+
-+#define CONFIG_SERIAL1 1
-+#define CONFIG_CONS_INDEX 1
-+
-+/* Clock Defines */
-+#define V_OSCK 24000000 /* Clock output from T2 */
-+#define V_SCLK (V_OSCK)
-+
-+/* Custom script for NOR */
-+#define CONFIG_SYS_LDSCRIPT "board/grinn/chiliboard/u-boot.lds"
-+
-+/* Always 128 KiB env size */
-+#define CONFIG_ENV_SIZE (128 << 10)
-+
-+/* Enhance our eMMC support / experience. */
-+#define CONFIG_CMD_GPT
-+#define CONFIG_EFI_PARTITION
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_PART
-+
-+#ifdef CONFIG_NAND
-+#ifndef CONFIG_NAND512MB
-+#define NANDARGS \
-+ "mtdids=" MTDIDS_DEFAULT "\0" \
-+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
-+ "nandargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${nandroot} " \
-+ "rootfstype=${nandrootfstype}\0" \
-+ "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
-+ "nandrootfstype=ubifs rootwait=1\0" \
-+ "nandboot=echo Booting from nand ...; " \
-+ "run nandargs; " \
-+ "nand read ${fdtaddr} u-boot-spl-os; " \
-+ "nand read ${loadaddr} kernel; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0"
-+#else
-+#define NANDARGS \
-+ "mtdids=" MTDIDS_DEFAULT "\0" \
-+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
-+ "nandargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${nandroot} " \
-+ "rootfstype=${nandrootfstype}\0" \
-+ "nandroot=ubi0:rootfs rw ubi.mtd=8,4096\0" \
-+ "nandrootfstype=ubifs rootwait=1\0" \
-+ "nandboot=echo Booting from nand ...; " \
-+ "run nandargs; " \
-+ "nand read ${fdtaddr} u-boot-spl-os; " \
-+ "nand read ${loadaddr} kernel; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0"
-+#endif
-+#else
-+#define NANDARGS ""
-+#endif
-+
-+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-+
-+#ifndef CONFIG_SPL_BUILD
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+ DEFAULT_LINUX_BOOT_ENV \
-+ "boot_fdt=try\0" \
-+ "bootpart=0:2\0" \
-+ "bootdir=/boot\0" \
-+ "bootfile=zImage\0" \
-+ "fdtfile=undefined\0" \
-+ "console=ttyO0,115200n8\0" \
-+ "partitions=" \
-+ "uuid_disk=${uuid_gpt_disk};" \
-+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
-+ "optargs=\0" \
-+ "mmcdev=0\0" \
-+ "mmcroot=/dev/mmcblk0p2 rw\0" \
-+ "mmcrootfstype=ext4 rootwait\0" \
-+ "rootpath=/export/rootfs\0" \
-+ "nfsopts=nolock\0" \
-+ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-+ "::off\0" \
-+ "ramroot=/dev/ram0 rw\0" \
-+ "ramrootfstype=ext2\0" \
-+ "mmcargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${mmcroot} " \
-+ "rootfstype=${mmcrootfstype}\0" \
-+ "spiroot=/dev/mtdblock4 rw\0" \
-+ "spirootfstype=jffs2\0" \
-+ "spisrcaddr=0xe0000\0" \
-+ "spiimgsize=0x362000\0" \
-+ "spibusno=0\0" \
-+ "spiargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${spiroot} " \
-+ "rootfstype=${spirootfstype}\0" \
-+ "netargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=/dev/nfs " \
-+ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-+ "ip=dhcp\0" \
-+ "bootenv=uEnv.txt\0" \
-+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-+ "importbootenv=echo Importing environment from mmc ...; " \
-+ "env import -t $loadaddr $filesize\0" \
-+ "ramargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${ramroot} " \
-+ "rootfstype=${ramrootfstype}\0" \
-+ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-+ "mmcloados=run mmcargs; " \
-+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-+ "if run loadfdt; then " \
-+ "bootz ${loadaddr} - ${fdtaddr}; " \
-+ "else " \
-+ "if test ${boot_fdt} = try; then " \
-+ "bootz; " \
-+ "else " \
-+ "echo WARN: Cannot load the DT; " \
-+ "fi; " \
-+ "fi; " \
-+ "else " \
-+ "bootz; " \
-+ "fi;\0" \
-+ "mmcboot=mmc dev ${mmcdev}; " \
-+ "if mmc rescan; then " \
-+ "echo SD/MMC found on device ${mmcdev};" \
-+ "if run loadbootenv; then " \
-+ "echo Loaded environment from ${bootenv};" \
-+ "run importbootenv;" \
-+ "fi;" \
-+ "if test -n $uenvcmd; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "if run loadimage; then " \
-+ "run mmcloados;" \
-+ "fi;" \
-+ "fi;\0" \
-+ "spiboot=echo Booting from spi ...; " \
-+ "run spiargs; " \
-+ "sf probe ${spibusno}:0; " \
-+ "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
-+ "bootz ${loadaddr}\0" \
-+ "netboot=echo Booting from network ...; " \
-+ "setenv autoload no; " \
-+ "dhcp; " \
-+ "tftp ${loadaddr} ${bootfile}; " \
-+ "tftp ${fdtaddr} ${fdtfile}; " \
-+ "run netargs; " \
-+ "bootz ${loadaddr} - ${fdtaddr}\0" \
-+ "ramboot=echo Booting from ramdisk ...; " \
-+ "run ramargs; " \
-+ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
-+ "findfdt="\
-+ "setenv fdtfile am335x-chiliboard.dtb;\0" \
-+ NANDARGS \
-+ DFUARGS
-+#endif
-+
-+#define CONFIG_BOOTCOMMAND \
-+ "run findfdt; " \
-+ "run mmcboot;" \
-+ "setenv mmcdev 1; " \
-+ "setenv bootpart 1:2; " \
-+ "run mmcboot;" \
-+ "run nandboot;"
-+
-+/* NS16550 Configuration */
-+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
-+#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
-+#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
-+#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
-+#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
-+#define CONFIG_BAUDRATE 115200
-+
-+/*
-+#define CONFIG_CMD_EEPROM
-+#define CONFIG_ENV_EEPROM_IS_ON_I2C
-+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-+#define CONFIG_SYS_I2C_MULTI_EEPROMS
-+*/
-+
-+/* PMIC support */
-+#define CONFIG_POWER_TPS65217
-+/* #define CONFIG_POWER_TPS65910 */
-+
-+/* SPL */
-+#ifndef CONFIG_NOR_BOOT
-+#define CONFIG_SPL_POWER_SUPPORT
-+#define CONFIG_SPL_YMODEM_SUPPORT
-+
-+/* Bootcount using the RTC block */
-+#define CONFIG_BOOTCOUNT_LIMIT
-+#define CONFIG_BOOTCOUNT_AM33XX
-+
-+/* USB gadget RNDIS */
-+#define CONFIG_SPL_MUSB_NEW_SUPPORT
-+
-+/* General network SPL, both CPSW and USB gadget RNDIS */
-+#define CONFIG_SPL_NET_SUPPORT
-+#define CONFIG_SPL_ENV_SUPPORT
-+#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
-+
-+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
-+
-+#ifdef CONFIG_NAND
-+#define CONFIG_NAND_OMAP_GPMC
-+#define CONFIG_NAND_OMAP_ELM
-+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
-+ CONFIG_SYS_NAND_PAGE_SIZE)
-+
-+#ifndef CONFIG_NAND512MB
-+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-+#define CONFIG_SYS_NAND_OOBSIZE 64
-+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
-+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
-+ 10, 11, 12, 13, 14, 15, 16, 17, \
-+ 18, 19, 20, 21, 22, 23, 24, 25, \
-+ 26, 27, 28, 29, 30, 31, 32, 33, \
-+ 34, 35, 36, 37, 38, 39, 40, 41, \
-+ 42, 43, 44, 45, 46, 47, 48, 49, \
-+ 50, 51, 52, 53, 54, 55, 56, 57, }
-+
-+#define CONFIG_SYS_NAND_ECCSIZE 512
-+#define CONFIG_SYS_NAND_ECCBYTES 14
-+#define CONFIG_SYS_NAND_ONFI_DETECTION
-+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
-+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-+#else
-+#define CONFIG_SYS_NAND_PAGE_SIZE 4096
-+#define CONFIG_SYS_NAND_OOBSIZE 224
-+#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024)
-+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
-+#define CONFIG_SYS_NAND_ECCPOS {\
-+ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\
-+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\
-+ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\
-+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\
-+ 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\
-+ 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\
-+ 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\
-+ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\
-+ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,\
-+ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119,\
-+ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129,\
-+ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139,\
-+ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149,\
-+ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,\
-+ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,\
-+ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179,\
-+ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189,\
-+ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199,\
-+ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
-+
-+#define CONFIG_SYS_NAND_ECCSIZE 512
-+#define CONFIG_SYS_NAND_ECCBYTES 26
-+#define CONFIG_SYS_NAND_ONFI_DETECTION
-+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
-+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x100000
-+#endif
-+
-+#endif
-+#endif
-+
-+/*
-+ * For NOR boot, we must set this to the start of where NOR is mapped
-+ * in memory.
-+ */
-+#ifdef CONFIG_NOR_BOOT
-+#define CONFIG_SYS_TEXT_BASE 0x08000000
-+#endif
-+
-+/*
-+ * USB configuration. We enable MUSB support, both for host and for
-+ * gadget. We set USB0 as peripheral and USB1 as host, based on the
-+ * board schematic and physical port wired to each. Then for host we
-+ * add mass storage support and for gadget we add both RNDIS ethernet
-+ * and DFU.
-+ */
-+#define CONFIG_USB_MUSB_DSPS
-+#define CONFIG_ARCH_MISC_INIT
-+#define CONFIG_MUSB_GADGET
-+#define CONFIG_MUSB_PIO_ONLY
-+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
-+#define CONFIG_USB_GADGET
-+#define CONFIG_USBDOWNLOAD_GADGET
-+#define CONFIG_USB_GADGET_DUALSPEED
-+#define CONFIG_USB_GADGET_VBUS_DRAW 2
-+#define CONFIG_MUSB_HOST
-+#define CONFIG_AM335X_USB0
-+#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
-+#define CONFIG_AM335X_USB1
-+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-+
-+#ifdef CONFIG_MUSB_HOST
-+#define CONFIG_CMD_USB
-+#define CONFIG_USB_STORAGE
-+#endif
-+
-+#ifdef CONFIG_MUSB_GADGET
-+#define CONFIG_USB_ETHER
-+#define CONFIG_USB_ETH_RNDIS
-+#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-+
-+/* USB TI's IDs */
-+#define CONFIG_G_DNL_VENDOR_NUM 0x0403
-+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
-+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
-+#endif /* CONFIG_MUSB_GADGET */
-+
-+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
-+/* disable host part of MUSB in SPL */
-+#undef CONFIG_MUSB_HOST
-+/* disable EFI partitions and partition UUID support */
-+#undef CONFIG_PARTITION_UUIDS
-+#undef CONFIG_EFI_PARTITION
-+/*
-+ * Disable CPSW SPL support so we fit within the 101KiB limit.
-+ */
-+#undef CONFIG_SPL_ETH_SUPPORT
-+#endif
-+
-+/* USB Device Firmware Update support */
-+#ifndef CONFIG_SPL_BUILD
-+#define CONFIG_DFU_FUNCTION
-+#define CONFIG_DFU_MMC
-+#define CONFIG_CMD_DFU
-+#define DFU_ALT_INFO_MMC \
-+ "dfu_alt_info_mmc=" \
-+ "boot part 0 1;" \
-+ "rootfs part 0 2;" \
-+ "MLO fat 0 1;" \
-+ "MLO.raw mmc 0x100 0x100;" \
-+ "u-boot.img.raw mmc 0x300 0x400;" \
-+ "spl-os-args.raw mmc 0x80 0x80;" \
-+ "spl-os-image.raw mmc 0x900 0x2000;" \
-+ "spl-os-args fat 0 1;" \
-+ "spl-os-image fat 0 1;" \
-+ "u-boot.img fat 0 1;" \
-+ "uEnv.txt fat 0 1\0"
-+#ifdef CONFIG_NAND
-+#define CONFIG_DFU_NAND
-+#define DFU_ALT_INFO_NAND \
-+ "dfu_alt_info_nand=" \
-+ "SPL part 0 1;" \
-+ "SPL.backup1 part 0 2;" \
-+ "SPL.backup2 part 0 3;" \
-+ "SPL.backup3 part 0 4;" \
-+ "u-boot part 0 5;" \
-+ "u-boot-spl-os part 0 6;" \
-+ "kernel part 0 8;" \
-+ "rootfs part 0 9\0"
-+#else
-+#define DFU_ALT_INFO_NAND ""
-+#endif
-+#define CONFIG_DFU_RAM
-+#define DFU_ALT_INFO_RAM \
-+ "dfu_alt_info_ram=" \
-+ "kernel ram 0x80200000 0xD80000;" \
-+ "fdt ram 0x80F80000 0x80000;" \
-+ "ramdisk ram 0x81000000 0x4000000\0"
-+#define DFUARGS \
-+ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
-+ DFU_ALT_INFO_MMC \
-+ DFU_ALT_INFO_RAM \
-+ DFU_ALT_INFO_NAND
-+#endif
-+
-+/*
-+ * Default to using SPI for environment, etc.
-+ * 0x000000 - 0x020000 : SPL (128KiB)
-+ * 0x020000 - 0x0A0000 : U-Boot (512KiB)
-+ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
-+ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
-+ * 0x0E0000 - 0x442000 : Linux Kernel
-+ * 0x442000 - 0x800000 : Userland
-+ */
-+#if defined(CONFIG_SPI_BOOT)
-+/* SPL related */
-+#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
-+#define CONFIG_SPL_SPI_SUPPORT
-+#define CONFIG_SPL_SPI_FLASH_SUPPORT
-+#define CONFIG_SPL_SPI_LOAD
-+#define CONFIG_SPL_SPI_BUS 0
-+#define CONFIG_SPL_SPI_CS 0
-+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
-+
-+#define CONFIG_ENV_IS_IN_SPI_FLASH
-+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-+#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
-+#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
-+#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
-+#define MTDIDS_DEFAULT "nor0=m25p80-flash.0"
-+#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \
-+ "512k(u-boot),128k(u-boot-env1)," \
-+ "128k(u-boot-env2),3464k(kernel)," \
-+ "-(rootfs)"
-+#elif defined(CONFIG_EMMC_BOOT)
-+#undef CONFIG_ENV_IS_NOWHERE
-+#define CONFIG_ENV_IS_IN_MMC
-+#define CONFIG_SYS_MMC_ENV_DEV 1
-+#define CONFIG_SYS_MMC_ENV_PART 2
-+#define CONFIG_ENV_OFFSET 0x0
-+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-+#endif
-+
-+/* SPI flash. */
-+#define CONFIG_CMD_SF
-+#define CONFIG_SPI_FLASH
-+#define CONFIG_SPI_FLASH_WINBOND
-+#define CONFIG_SF_DEFAULT_SPEED 24000000
-+
-+/* Network. */
-+#define CONFIG_PHY_GIGE
-+#define CONFIG_PHYLIB
-+#define CONFIG_PHY_SMSC
-+
-+/* NAND support */
-+#ifdef CONFIG_NAND
-+#define CONFIG_CMD_NAND
-+#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
-+#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-+
-+#ifndef CONFIG_NAND512MB
-+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
-+ "128k(SPL.backup1)," \
-+ "128k(SPL.backup2)," \
-+ "128k(SPL.backup3),1792k(u-boot)," \
-+ "128k(u-boot-spl-os)," \
-+ "128k(u-boot-env),5m(kernel),-(rootfs)"
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
-+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-+#else
-+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:256k(SPL)," \
-+ "256k(SPL.backup1)," \
-+ "256k(SPL.backup2)," \
-+ "256k(SPL.backup3),2048k(u-boot)," \
-+ "256k(u-boot-spl-os)," \
-+ "256k(u-boot-env),5m(kernel),-(rootfs)"
-+#define CONFIG_ENV_IS_IN_NAND
-+#define CONFIG_ENV_OFFSET 0x340000 /* environment starts here */
-+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-+#endif
-+
-+#endif
-+#endif
-+
-+/*
-+ * NOR Size = 16 MiB
-+ * Number of Sectors/Blocks = 128
-+ * Sector Size = 128 KiB
-+ * Word length = 16 bits
-+ * Default layout:
-+ * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
-+ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
-+ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
-+ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
-+ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
-+ */
-+#if defined(CONFIG_NOR)
-+#undef CONFIG_SYS_NO_FLASH
-+#define CONFIG_CMD_FLASH
-+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-+#define CONFIG_SYS_FLASH_PROTECTION
-+#define CONFIG_SYS_FLASH_CFI
-+#define CONFIG_FLASH_CFI_DRIVER
-+#define CONFIG_FLASH_CFI_MTD
-+#define CONFIG_SYS_MAX_FLASH_SECT 128
-+#define CONFIG_SYS_MAX_FLASH_BANKS 1
-+#define CONFIG_SYS_FLASH_BASE (0x08000000)
-+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-+/* Reduce SPL size by removing unlikey targets */
-+#ifdef CONFIG_NOR_BOOT
-+#define CONFIG_ENV_IS_IN_FLASH
-+#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-+#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */
-+#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */
-+#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
-+#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
-+ "512k(u-boot)," \
-+ "128k(u-boot-env1)," \
-+ "128k(u-boot-env2)," \
-+ "4m(kernel),-(rootfs)"
-+#endif
-+#endif /* NOR support */
-+
-+#endif /* ! __CONFIG_CHILISOM_H */
---
-2.5.0
-
diff --git a/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch b/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch
deleted file mode 100644
index fc41962ef..000000000
--- a/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,423 +0,0 @@
-diff -Nur u-boot-2014.07.orig/include/config_distro_bootcmd.h u-boot-2014.07/include/config_distro_bootcmd.h
---- u-boot-2014.07.orig/include/config_distro_bootcmd.h 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2014.07/include/config_distro_bootcmd.h 2015-04-13 11:53:03.000000000 -0300
-@@ -0,0 +1,236 @@
-+/*
-+ * (C) Copyright 2014
-+ * NVIDIA Corporation <www.nvidia.com>
-+ *
-+ * Copyright 2014 Red Hat, Inc.
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
-+#define _CONFIG_CMD_DISTRO_BOOTCMD_H
-+
-+/*
-+ * A note on error handling: It is possible for BOOT_TARGET_DEVICES to
-+ * reference a device that is not enabled in the U-Boot configuration, e.g.
-+ * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given
-+ * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor
-+ * at compile time, it's not possible to detect and report such problems via
-+ * a simple #ifdef/#error combination. Still, the code needs to report errors.
-+ * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to
-+ * reference a non-existent symbol, and have the name of that symbol encode
-+ * the error message. Consequently, this file contains references to e.g.
-+ * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the
-+ * prevalence of capitals here, this looks like a pre-processor macro and
-+ * hence seems like it should be all capitals, but it's really an error
-+ * message that includes some other pre-processor symbols in the text.
-+ */
-+
-+/* We need the part command */
-+#define CONFIG_PARTITION_UUIDS
-+#define CONFIG_CMD_PART
-+
-+#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \
-+ "if " #devtypel " dev ${devnum}; then " \
-+ "setenv devtype " #devtypel "; " \
-+ "run scan_dev_for_boot_part; " \
-+ "fi\0"
-+
-+#define BOOTENV_SHARED_BLKDEV(devtypel) \
-+ #devtypel "_boot=" \
-+ BOOTENV_SHARED_BLKDEV_BODY(devtypel)
-+
-+#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \
-+ "bootcmd_" #devtypel #instance "=" \
-+ "setenv devnum " #instance "; " \
-+ "run " #devtypel "_boot\0"
-+
-+#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \
-+ #devtypel #instance " "
-+
-+#ifdef CONFIG_CMD_MMC
-+#define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc)
-+#define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_MMC
-+#define BOOTENV_DEV_MMC \
-+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
-+#define BOOTENV_DEV_NAME_MMC \
-+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC
-+#endif
-+
-+#ifdef CONFIG_CMD_SATA
-+#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata)
-+#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_SATA
-+#define BOOTENV_DEV_SATA \
-+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
-+#define BOOTENV_DEV_NAME_SATA \
-+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
-+#endif
-+
-+#ifdef CONFIG_CMD_SCSI
-+#define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
-+#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; "
-+#define BOOTENV_SHARED_SCSI \
-+ "scsi_init=" \
-+ "if ${scsi_need_init}; then " \
-+ "setenv scsi_need_init false; " \
-+ "scsi scan; " \
-+ "fi\0" \
-+ \
-+ "scsi_boot=" \
-+ BOOTENV_RUN_SCSI_INIT \
-+ BOOTENV_SHARED_BLKDEV_BODY(scsi)
-+#define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_RUN_SCSI_INIT
-+#define BOOTENV_SET_SCSI_NEED_INIT
-+#define BOOTENV_SHARED_SCSI
-+#define BOOTENV_DEV_SCSI \
-+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
-+#define BOOTENV_DEV_NAME_SCSI \
-+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
-+#endif
-+
-+#ifdef CONFIG_CMD_IDE
-+#define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide)
-+#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_SHARED_IDE
-+#define BOOTENV_DEV_IDE \
-+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
-+#define BOOTENV_DEV_NAME_IDE \
-+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
-+#endif
-+
-+#ifdef CONFIG_CMD_USB
-+#define BOOTENV_RUN_USB_INIT "usb start; "
-+#define BOOTENV_SHARED_USB \
-+ "usb_boot=" \
-+ BOOTENV_RUN_USB_INIT \
-+ BOOTENV_SHARED_BLKDEV_BODY(usb)
-+#define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV
-+#define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV
-+#else
-+#define BOOTENV_RUN_USB_INIT
-+#define BOOTENV_SHARED_USB
-+#define BOOTENV_DEV_USB \
-+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
-+#define BOOTENV_DEV_NAME_USB \
-+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB
-+#endif
-+
-+#if defined(CONFIG_CMD_DHCP)
-+#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \
-+ "bootcmd_dhcp=" \
-+ BOOTENV_RUN_USB_INIT \
-+ "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \
-+ "source ${scriptaddr}; " \
-+ "fi\0"
-+#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \
-+ "dhcp "
-+#else
-+#define BOOTENV_DEV_DHCP \
-+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
-+#define BOOTENV_DEV_NAME_DHCP \
-+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP
-+#endif
-+
-+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
-+#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \
-+ "bootcmd_pxe=" \
-+ BOOTENV_RUN_USB_INIT \
-+ "dhcp; " \
-+ "if pxe get; then " \
-+ "pxe boot; " \
-+ "fi\0"
-+#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \
-+ "pxe "
-+#else
-+#define BOOTENV_DEV_PXE \
-+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
-+#define BOOTENV_DEV_NAME_PXE \
-+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
-+#endif
-+
-+#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \
-+ BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance)
-+#define BOOTENV_BOOT_TARGETS \
-+ "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
-+
-+#define BOOTENV_DEV(devtypeu, devtypel, instance) \
-+ BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
-+#define BOOTENV \
-+ BOOTENV_SHARED_MMC \
-+ BOOTENV_SHARED_USB \
-+ BOOTENV_SHARED_SATA \
-+ BOOTENV_SHARED_SCSI \
-+ BOOTENV_SHARED_IDE \
-+ "boot_prefixes=/ /boot/\0" \
-+ "boot_scripts=boot.scr.uimg boot.scr\0" \
-+ "boot_script_dhcp=boot.scr.uimg\0" \
-+ BOOTENV_BOOT_TARGETS \
-+ \
-+ "boot_extlinux=" \
-+ "sysboot ${devtype} ${devnum}:${bootpart} any " \
-+ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \
-+ \
-+ "scan_dev_for_extlinux=" \
-+ "if test -e ${devtype} ${devnum}:${bootpart} " \
-+ "${prefix}extlinux/extlinux.conf; then " \
-+ "echo Found ${prefix}extlinux/extlinux.conf; " \
-+ "run boot_extlinux; " \
-+ "echo SCRIPT FAILED: continuing...; " \
-+ "fi\0" \
-+ \
-+ "boot_a_script=" \
-+ "load ${devtype} ${devnum}:${bootpart} " \
-+ "${scriptaddr} ${prefix}${script}; " \
-+ "source ${scriptaddr}\0" \
-+ \
-+ "scan_dev_for_scripts=" \
-+ "for script in ${boot_scripts}; do " \
-+ "if test -e ${devtype} ${devnum}:${bootpart} " \
-+ "${prefix}${script}; then " \
-+ "echo Found U-Boot script " \
-+ "${prefix}${script}; " \
-+ "run boot_a_script; " \
-+ "echo SCRIPT FAILED: continuing...; " \
-+ "fi; " \
-+ "done\0" \
-+ \
-+ "scan_dev_for_boot=" \
-+ "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \
-+ "for prefix in ${boot_prefixes}; do " \
-+ "run scan_dev_for_extlinux; " \
-+ "run scan_dev_for_scripts; " \
-+ "done\0" \
-+ \
-+ "scan_dev_for_boot_part=" \
-+ "part list ${devtype} ${devnum} -bootable devplist; " \
-+ "env exists devplist || setenv devplist 1; " \
-+ "for bootpart in ${devplist}; do " \
-+ "if fstype ${devtype} ${devnum}:${bootpart} " \
-+ "bootfstype; then " \
-+ "run scan_dev_for_boot; " \
-+ "fi; " \
-+ "done\0" \
-+ \
-+ BOOT_TARGET_DEVICES(BOOTENV_DEV) \
-+ \
-+ "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \
-+ "for target in ${boot_targets}; do " \
-+ "run bootcmd_${target}; " \
-+ "done\0"
-+
-+#ifndef CONFIG_BOOTCOMMAND
-+#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
-+#endif
-+
-+#endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */
-diff -Nur u-boot-2014.07.orig/include/configs/chiliboard.h u-boot-2014.07/include/configs/chiliboard.h
---- u-boot-2014.07.orig/include/configs/chiliboard.h 2016-02-25 00:53:19.766846991 -0300
-+++ u-boot-2014.07/include/configs/chiliboard.h 2016-02-25 00:57:01.436205462 -0300
-@@ -124,7 +124,6 @@
- * as that will normally be within the kernel lowmem and thus visible via
- * bootm_size and we only run on platforms with 256MB or more of memory.
- */
--#ifdef CONFIG_RAM128MB
- #define DEFAULT_LINUX_BOOT_ENV \
- "loadaddr=0x82000000\0" \
- "kernel_addr_r=0x82000000\0" \
-@@ -133,16 +132,6 @@
- "rdaddr=0x84080000\0" \
- "ramdisk_addr_r=0x84080000\0" \
- "bootm_size=0x8000000\0"
--#else
--#define DEFAULT_LINUX_BOOT_ENV \
-- "loadaddr=0x82000000\0" \
-- "kernel_addr_r=0x82000000\0" \
-- "fdtaddr=0x88000000\0" \
-- "fdt_addr_r=0x88000000\0" \
-- "rdaddr=0x88080000\0" \
-- "ramdisk_addr_r=0x88080000\0" \
-- "bootm_size=0x10000000\0"
--#endif
-
- /*
- * Default to a quick boot delay.
-@@ -258,6 +247,7 @@
- #define CONFIG_CMD_ASKENV
- #define CONFIG_CMD_ECHO
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
-
- /*
- * Common filesystems support. When we have removable storage we
-@@ -398,6 +388,9 @@
- #define CONFIG_EFI_PARTITION
- #define CONFIG_PARTITION_UUIDS
- #define CONFIG_CMD_PART
-+#define CONFIG_CMD_SETEXPR
-+
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-
- #ifdef CONFIG_NAND
- #ifndef CONFIG_NAND512MB
-@@ -437,12 +430,20 @@
-
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- DEFAULT_LINUX_BOOT_ENV \
- "boot_fdt=try\0" \
-- "bootpart=0:2\0" \
-+ "bootpart=0:1\0" \
- "bootdir=/boot\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "bootfile=zImage\0" \
- "fdtfile=undefined\0" \
- "console=ttyO0,115200n8\0" \
-@@ -450,9 +451,6 @@
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
- "optargs=\0" \
-- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext4 rootwait\0" \
- "rootpath=/export/rootfs\0" \
- "nfsopts=nolock\0" \
- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-@@ -461,8 +459,7 @@
- "ramrootfstype=ext2\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-+ "root=${root}\0" \
- "spiroot=/dev/mtdblock4 rw\0" \
- "spirootfstype=jffs2\0" \
- "spisrcaddr=0xe0000\0" \
-@@ -477,46 +474,48 @@
- "root=/dev/nfs " \
- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
- "ip=dhcp\0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t $loadaddr $filesize\0" \
- "ramargs=setenv bootargs console=${console} " \
- "${optargs} " \
- "root=${ramroot} " \
- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcloados=run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdtaddr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-- "mmcboot=mmc dev ${mmcdev}; " \
-- "if mmc rescan; then " \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadimage; then " \
-- "run mmcloados;" \
-- "fi;" \
-- "fi;\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=for devtype in mmc; do " \
-+ "for devnum in 0 1; do " \
-+ "if ${devtype} dev ${devnum}; then " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "fi;" \
-+ "done;" \
-+ "done;\0" \
- "spiboot=echo Booting from spi ...; " \
- "run spiargs; " \
- "sf probe ${spibusno}:0; " \
-@@ -541,9 +540,6 @@
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
- "run mmcboot;" \
-- "setenv mmcdev 1; " \
-- "setenv bootpart 1:2; " \
-- "run mmcboot;" \
- "run nandboot;"
-
- /* NS16550 Configuration */
diff --git a/libre/uboot4extlinux-chiliboard/PKGBUILD b/libre/uboot4extlinux-chiliboard/PKGBUILD
deleted file mode 100644
index 0a2f97131..000000000
--- a/libre/uboot4extlinux-chiliboard/PKGBUILD
+++ /dev/null
@@ -1,62 +0,0 @@
-# U-Boot: ChiliBoard
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot4extlinux-chiliboard
-pkgver=2014.07
-pkgrel=1
-pkgdesc="U-Boot with Extlinux support for ChiliBoard"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-replaces=('uboot-chiliboard-linux-libre' 'uboot-chiliboard')
-conflicts=('uboot-chiliboard-linux-libre' 'uboot-chiliboard' 'uboot4grub-chiliboard')
-makedepends=('bc')
-license=('GPL')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch'
- '0002-ARM-asm-io.h-use-static-inline.patch'
- '0003-common-main.c-make-show_boot_progress-__weak.patch'
- '0004-common-board_f-cosmetic-use-__weak-for-leds.patch'
- '0005-chiliboard-support.patch'
- '0006-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-md5sums=('36d4bad687edcafa396fee607e505d4e'
- 'e070e8b5cf8628b6440dfc9dbd87cb65'
- '318310de19110167fe15ceac3ae32f7d'
- '1792346431786e1442c4059cd3f288ed'
- '2a32a77f123391c02935754ced2743c2'
- '5951c799b35c526f02edbcb3eb1295fc'
- '35147d090738dd0c8104a565de0f404e'
- '068f6b4e8047115e73f29af5f384889b'
- '0afad1f6f3f8609db6e1f5bb322b2a1a')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
- patch -Np1 -i ../0002-ARM-asm-io.h-use-static-inline.patch
- patch -Np1 -i ../0003-common-main.c-make-show_boot_progress-__weak.patch
- patch -Np1 -i ../0004-common-board_f-cosmetic-use-__weak-for-leds.patch
- patch -Np1 -i ../0005-chiliboard-support.patch
- patch -Np1 -i ../0006-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- make distclean
- make chiliboard_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-chiliboard/extlinux.conf b/libre/uboot4extlinux-chiliboard/extlinux.conf
deleted file mode 100644
index 52de94d49..000000000
--- a/libre/uboot4extlinux-chiliboard/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /boot/vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /boot/vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /boot/vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /boot/vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /boot/vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /boot/vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /boot/vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /boot/vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8
-# fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-chiliboard/uEnv.txt b/libre/uboot4extlinux-chiliboard/uEnv.txt
deleted file mode 100644
index a9f26096d..000000000
--- a/libre/uboot4extlinux-chiliboard/uEnv.txt
+++ /dev/null
@@ -1 +0,0 @@
-optargs=
diff --git a/libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install b/libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install
deleted file mode 100644
index 4467c694e..000000000
--- a/libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install
+++ /dev/null
@@ -1,37 +0,0 @@
-flash_instructions() {
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-}
-
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- root=$(mount | awk '/ on \/ / { print $1; }')
- if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
- root=${root:0:12}
- echo "A new U-Boot version needs to be flashed onto $root."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- flash_instructions
- fi
- else
- echo "Flash the new U-Boot version onto your boot device. For example:"
- flash_instructions
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch
deleted file mode 100644
index c99cd89b8..000000000
--- a/libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-diff -Nur u-boot-2016.01.orig/board/ti/beagle/beagle.c u-boot-2016.01/board/ti/beagle/beagle.c
---- u-boot-2016.01.orig/board/ti/beagle/beagle.c 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/board/ti/beagle/beagle.c 2016-02-24 19:45:05.779336247 -0300
-@@ -56,6 +56,7 @@
- #define BBTOYS_WIFI 0x01000B00
- #define BBTOYS_VGA 0x02000B00
- #define BBTOYS_LCD 0x03000B00
-+#define BBTOYS_ULCD 0x04000B00
- #define BCT_BRETTL3 0x01000F00
- #define BCT_BRETTL4 0x02000F00
- #define LSR_COM6L_ADPT 0x01001300
-@@ -211,25 +212,25 @@
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
--static unsigned int get_expansion_id(void)
-+static unsigned int get_expansion_id(int eeprom_address)
- {
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-+ if (i2c_probe(eeprom_address) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
- sizeof(expansion_config));
- }
-
-@@ -341,15 +342,18 @@
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -390,7 +394,7 @@
- generate_fake_mac = true;
- }
-
-- switch (get_expansion_id()) {
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
-@@ -471,6 +475,30 @@
- }
-
- if (expansion_config.content == 1)
-+ setenv(expansion_config.env_var, expansion_config.env_setting);
-+
-+ /* Scan 0x51 as well for loop-thru boards */
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
-+ case BBTOYS_ULCD:
-+ printf("Recognized BeagleBoardToys uLCD-lite board\n");
-+ setenv("buddy2", "bbtoys-ulcd");
-+ setenv("defaultdisplay", "dvi");
-+ setenv("dvimode", "800x480MR-16@60");
-+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
-+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
-+ setenv("kmsmode", "video=DVI-D-1:800x480");
-+ break;
-+ case BEAGLE_NO_EEPROM:
-+ printf("No EEPROM on expansion board\n");
-+ setenv("buddy2", "none");
-+ break;
-+ default:
-+ printf("Unrecognized expansion board: %x\n",
-+ expansion_config.device_vendor);
-+ setenv("buddy2", "unknown");
-+ }
-+
-+ if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
-
- twl4030_power_init();
-diff -Nur u-boot-2016.01.orig/include/configs/omap3_beagle.h u-boot-2016.01/include/configs/omap3_beagle.h
---- u-boot-2016.01.orig/include/configs/omap3_beagle.h 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/include/configs/omap3_beagle.h 2016-02-24 19:50:25.959802093 -0300
-@@ -91,6 +91,12 @@
- #define CONFIG_USB_ETHER_MCS7830
- #define CONFIG_USB_ETHER_SMSC95XX
-
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /* GPIO banks */
- #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
- #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-@@ -124,51 +130,71 @@
- #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
- /* devices */
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "rdaddr=0x81000000\0" \
-+ BOOTENV \
-+ "loadaddr=0x82000000\0" \
-+ "rdaddr=0x88080000\0" \
- "fdt_high=0xffffffff\0" \
-- "fdtaddr=0x80f80000\0" \
-- "usbtty=cdc_acm\0" \
-- "bootfile=uImage\0" \
-- "ramdisk=ramdisk.gz\0" \
-- "bootdir=/boot\0" \
-- "bootpart=0:2\0" \
-+ "fdtaddr=0x88000000\0" \
- "console=ttyO2,115200n8\0" \
-- "mpurate=auto\0" \
-- "buddy=none\0" \
-- "optargs=\0" \
-- "camera=none\0" \
-- "vram=12M\0" \
-- "dvimode=640x480MR-16@60\0" \
-- "defaultdisplay=dvi\0" \
-+ "fdtfile=undefined\0" \
-+ "bootpart=0:1\0" \
-+ "bootdir=\0" \
-+ "fdtdir=/dtbs\0" \
-+ "bootfile=zImage\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext3 rootwait\0" \
-- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
-- "nandrootfstype=ubifs\0" \
-- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-- "ramrootfstype=ext2\0" \
-+ "optargs=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "nandargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${nandroot} " \
-- "rootfstype=${nandrootfstype}\0" \
-+ "root=${root} " \
-+ "${musb} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
-+ "part uuid ${devtype} ${rootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "findfdt=" \
- "if test $beaglerev = AxBx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
-@@ -181,81 +207,11 @@
- "if test $beaglerev = xMC; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "validatefdt=" \
-- "if test $beaglerev = xMAB; then " \
-- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; " \
-- "fi; " \
-- "fi; \0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "bootm ${loadaddr}\0" \
-- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
-- "run mmcargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "nandboot=echo Booting from nand ...; " \
-- "run nandargs; " \
-- "nand read ${loadaddr} 280000 400000; " \
-- "bootm ${loadaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootm ${loadaddr}\0" \
-- "userbutton=if gpio input 173; then run userbutton_xm; " \
-- "else run userbutton_nonxm; fi;\0" \
-- "userbutton_xm=gpio input 4;\0" \
-- "userbutton_nonxm=gpio input 7;\0"
--/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-+ "echo WARNING: Could not determine device tree to use; fi; \0"
-+
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run userbutton; then " \
-- "setenv bootenv uEnv.txt;" \
-- "else " \
-- "setenv bootenv user.txt;" \
-- "fi;" \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot;" \
-- "fi;" \
-- "fi; " \
-- "fi;" \
-- "run nandboot;" \
-- "setenv bootfile zImage;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcbootz; " \
-- "fi; " \
-+ "run mmcboot"
-
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
diff --git a/libre/uboot4extlinux-omap3_beagle/PKGBUILD b/libre/uboot4extlinux-omap3_beagle/PKGBUILD
deleted file mode 100644
index a3c16f7cc..000000000
--- a/libre/uboot4extlinux-omap3_beagle/PKGBUILD
+++ /dev/null
@@ -1,51 +0,0 @@
-# U-Boot: BeagleBoard and BeagleBoard-xM
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot4extlinux-omap3_beagle
-pkgver=2016.01
-pkgrel=1
-pkgdesc="U-Boot with Extlinux support for BeagleBoard and BeagleBoard-xM"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-replaces=('uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts'
- 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck'
- 'uboot-beagleboard' 'uboot-omap3_beagle')
-conflicts=('uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts'
- 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck'
- 'uboot-beagleboard' 'uboot-omap3_beagle' 'uboot4grub-omap3_beagle')
-makedepends=('bc')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-md5sums=('7d4f65fd43d4d706f5c5650e020d899d'
- 'da3d52f785bce02602f88fb85f74de2f'
- '5172c86fd491728aad8109ebb8a997f8'
- 'd41d8cd98f00b204e9800998ecf8427e')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS CFLAGS CXXFLAGS
-
- make distclean
- make omap3_beagle_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-omap3_beagle/extlinux.conf b/libre/uboot4extlinux-omap3_beagle/extlinux.conf
deleted file mode 100644
index 708bfcddb..000000000
--- a/libre/uboot4extlinux-omap3_beagle/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-omap3_beagle/uEnv.txt b/libre/uboot4extlinux-omap3_beagle/uEnv.txt
deleted file mode 100644
index e69de29bb..000000000
--- a/libre/uboot4extlinux-omap3_beagle/uEnv.txt
+++ /dev/null
diff --git a/libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install b/libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install
deleted file mode 100644
index 8aff26699..000000000
--- a/libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install
+++ /dev/null
@@ -1,11 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-post_install() {
- extlinux_warning
-}
-
-post_upgrade() {
- extlinux_warning
-}
diff --git a/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 09aee7ce0..000000000
--- a/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-diff -Nur u-boot-2016.01.orig/include/configs/ti_omap4_common.h u-boot-2016.01/include/configs/ti_omap4_common.h
---- u-boot-2016.01.orig/include/configs/ti_omap4_common.h 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/include/configs/ti_omap4_common.h 2016-02-24 23:19:09.761629260 -0300
-@@ -46,7 +46,6 @@
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method. Default to the static timing infomation.
- */
--#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
- #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-@@ -79,33 +78,74 @@
- #define CONFIG_USB_TTY 1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- /*
- * Environment setup
- */
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- DEFAULT_LINUX_BOOT_ENV \
- DEFAULT_MMC_TI_ARGS \
- "console=ttyO2,115200n8\0" \
- "fdtfile=undefined\0" \
- "bootpart=0:2\0" \
- "bootdir=/boot\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "bootfile=zImage\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "usbtty=cdc_acm\0" \
- "vram=16M\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-- "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-- "env import -t ${loadaddr} ${filesize}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
-- "mmcboot=echo Booting from mmc${mmcdev} ...; " \
-- "run args_mmc; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "uimageboot=echo Booting from mmc${mmcdev} ...; " \
-- "run args_mmc; " \
-- "bootm ${loadaddr}\0" \
-+ "optargs=\0" \
-+ "mmcargs=setenv bootargs console=${console} " \
-+ "vram=${vram} " \
-+ "root=${root} " \
-+ "${optargs}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "findfdt="\
- "if test $board_name = sdp4430; then " \
- "setenv fdtfile omap4-sdp.dtb; fi; " \
-@@ -118,32 +158,11 @@
- "if test $board_name = duovero; then " \
- "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-+ "echo WARNING: Could not determine device tree to use; fi; \0"
-
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadbootenv; then " \
-- "run importbootenv; " \
-- "fi;" \
-- "if test -n ${uenvcmd}; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "fi;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcboot; " \
-- "fi; " \
-- "if run loaduimage; then " \
-- "run uimageboot;" \
-- "fi; " \
-- "fi"
-+ "run mmcboot"
-
- /*
- * Defines for SPL
diff --git a/libre/uboot4extlinux-omap4_panda/PKGBUILD b/libre/uboot4extlinux-omap4_panda/PKGBUILD
deleted file mode 100644
index cf9132074..000000000
--- a/libre/uboot4extlinux-omap4_panda/PKGBUILD
+++ /dev/null
@@ -1,49 +0,0 @@
-# U-Boot: PandaBoard and PandaBoard ES
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot4extlinux-omap4_panda
-pkgver=2016.01
-pkgrel=1
-pkgdesc="U-Boot with Extlinux support for PandaBoard and PandaBoard ES"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-replaces=('uboot-pandaboard-linux-libre' 'uboot-pandaboard' 'uboot-omap4_panda')
-conflicts=('uboot-pandaboard-linux-libre' 'uboot-pandaboard' 'uboot-omap4_panda' 'uboot4grub-omap4_panda')
-makedepends=('bc')
-license=('GPL')
-install=${pkgname}.install
-backup=('boot/extlinux/extlinux.conf' 'boot/uEnv.txt')
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-md5sums=('7d4f65fd43d4d706f5c5650e020d899d'
- 'b74e858feeed48acaba5ac0548d675ca'
- '12c61073bb860f4c8d8ec59145c267ed'
- '86004660f2912861a040e335c9c0e85b')
-
-prepare() {
- cd u-boot-${pkgver}
-
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS
-
- make distclean
- make omap4_panda_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
-
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-omap4_panda/extlinux.conf b/libre/uboot4extlinux-omap4_panda/extlinux.conf
deleted file mode 100644
index 725121811..000000000
--- a/libre/uboot4extlinux-omap4_panda/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /boot/vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /boot/vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /boot/vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /boot/vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /boot/vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /boot/vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /boot/vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /boot/vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-omap4_panda/uEnv.txt b/libre/uboot4extlinux-omap4_panda/uEnv.txt
deleted file mode 100644
index 55298e1a9..000000000
--- a/libre/uboot4extlinux-omap4_panda/uEnv.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-# Uncomment and add any additional kernel parameters to optargs
-#optargs=
diff --git a/libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install b/libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install
deleted file mode 100644
index 771f1f0b3..000000000
--- a/libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install
+++ /dev/null
@@ -1,26 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k
- dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
- fi
- extlinux_warning
-}
-
-post_install() {
- flash_uboot
-}
-
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 5b59f18af..000000000
--- a/libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-diff -Nur u-boot-2016.01.orig/include/config_distro_defaults.h u-boot-2016.01/include/config_distro_defaults.h
---- u-boot-2016.01.orig/include/config_distro_defaults.h 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/include/config_distro_defaults.h 2016-02-26 13:23:28.880315683 -0300
-@@ -67,4 +67,7 @@
- #define CONFIG_SUPPORT_RAW_INITRD
- #define CONFIG_SYS_HUSH_PARSER
-
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- #endif /* _CONFIG_CMD_DISTRO_DEFAULTS_H */
-diff -Nur u-boot-2016.01.orig/include/configs/sunxi-common.h u-boot-2016.01/include/configs/sunxi-common.h
---- u-boot-2016.01.orig/include/configs/sunxi-common.h 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/include/configs/sunxi-common.h 2016-02-26 14:37:41.077919620 -0300
-@@ -173,7 +173,7 @@
- #define CONFIG_SYS_NO_FLASH
-
- #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
--#define CONFIG_IDENT_STRING " Allwinner Technology"
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-
- #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */
- #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
-@@ -449,6 +449,9 @@
- #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \
- "fel "
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
- #define BOOT_TARGET_DEVICES(func) \
- func(FEL, fel, na) \
- BOOT_TARGET_DEVICES_MMC(func) \
-@@ -457,6 +460,7 @@
- BOOT_TARGET_DEVICES_USB(func) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-+#include <config_distro_bootcmd.h>
-
- #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
- #define BOOTCMD_SUNXI_COMPAT \
-@@ -474,8 +478,6 @@
- #define BOOTCMD_SUNXI_COMPAT
- #endif
-
--#include <config_distro_bootcmd.h>
--
- #ifdef CONFIG_USB_KEYBOARD
- #define CONSOLE_STDIN_SETTINGS \
- "preboot=usb start\0" \
-@@ -500,13 +502,13 @@
- CONSOLE_STDOUT_SETTINGS
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- CONSOLE_ENV_SETTINGS \
- MEM_LAYOUT_ENV_SETTINGS \
- DFU_ALT_INFO_RAM \
- "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
- "console=ttyS0,115200\0" \
-- BOOTCMD_SUNXI_COMPAT \
-- BOOTENV
-+ BOOTCMD_SUNXI_COMPAT
-
- #else /* ifndef CONFIG_SPL_BUILD */
- #define CONFIG_EXTRA_ENV_SETTINGS
diff --git a/libre/uboot4extlinux-sunxi/PKGBUILD b/libre/uboot4extlinux-sunxi/PKGBUILD
deleted file mode 100644
index 7c82f57e8..000000000
--- a/libre/uboot4extlinux-sunxi/PKGBUILD
+++ /dev/null
@@ -1,237 +0,0 @@
-# U-Boot: sunXi
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgbase=uboot4extlinux-sunxi
-pkgname=('uboot4extlinux-a10-olinuxino-lime'
- 'uboot4extlinux-a10s-olinuxino-micro'
- 'uboot4extlinux-a13-olinuxino'
- 'uboot4extlinux-a13-olinuxino-micro'
- 'uboot4extlinux-a20-olinuxino-lime'
- 'uboot4extlinux-a20-olinuxino-lime2'
- 'uboot4extlinux-a20-olinuxino-micro'
- 'uboot4extlinux-cubieboard'
- 'uboot4extlinux-cubieboard2'
- 'uboot4extlinux-cubietruck'
- 'uboot4extlinux-pcduino'
- 'uboot4extlinux-pcduino3'
- 'uboot4extlinux-pcduino3-nano')
-pkgver=2016.01
-pkgrel=1
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-makedepends=('bc' 'dtc')
-backup=(boot/extlinux/extlinux.conf)
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf')
-md5sums=('7d4f65fd43d4d706f5c5650e020d899d'
- '8cac8444bd1d229063a150d212cc360a'
- 'acd3e7b3c45c2801c2435f4a5de3f58c')
-
-boards=('A10-OLinuXino-Lime'
- 'A10s-OLinuXino-M'
- 'A13-OLinuXino'
- 'A13-OLinuXinoM'
- 'A20-OLinuXino-Lime'
- 'A20-OLinuXino-Lime2'
- 'A20-OLinuXino_MICRO'
- 'Cubieboard'
- 'Cubieboard2'
- 'Cubietruck'
- 'Linksprite_pcDuino'
- 'Linksprite_pcDuino3'
- 'Linksprite_pcDuino3_Nano')
-
-prepare() {
- cd u-boot-${pkgver}
-
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS
- unset CXXFLAGS
- unset LDFLAGS
-
- for i in ${boards[@]}; do
- mkdir ../bin_${i}
- make distclean
- make ${i}_config
- make EXTRAVERSION=-${pkgrel}
- mv u-boot-sunxi-with-spl.bin ../bin_${i}
- done
-}
-
-package_uboot4extlinux-a10-olinuxino-lime() {
- pkgdesc="U-Boot with Extlinux support for A10 OLinuXino Lime"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-a10-olinuxino-lime' 'uboot-a10-olinuxino-lime-linux-libre')
- replaces=('uboot-a10-olinuxino-lime' 'uboot-a10-olinuxino-lime-linux-libre' 'uboot4grub-a10-olinuxino-lime')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_A10-OLinuXino-Lime/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-a10s-olinuxino-micro() {
- pkgdesc="U-Boot with Extlinux support for A10s OLinuXino Micro"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-a10s-olinuxino-micro' 'uboot-a10s-olinuxino-micro-linux-libre')
- replaces=('uboot-a10s-olinuxino-micro' 'uboot-a10s-olinuxino-micro-linux-libre' 'uboot4grub-a10s-olinuxino-micro')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_A10s-OLinuXino-M/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-a13-olinuxino() {
- pkgdesc="U-Boot with Extlinux support for A13 OLinuXino"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-a13-olinuxino' 'uboot-a13-olinuxino-linux-libre')
- replaces=('uboot-a13-olinuxino' 'uboot-a13-olinuxino-linux-libre' 'uboot4grub-a13-olinuxino')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_A13-OLinuXino/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-a13-olinuxino-micro() {
- pkgdesc="U-Boot with Extlinux support for A13 OLinuXino Micro"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-a13-olinuxino-micro' 'uboot-a13-olinuxino-micro-linux-libre')
- replaces=('uboot-a13-olinuxino-micro' 'uboot-a13-olinuxino-micro-linux-libre' 'uboot4grub-a13-olinuxino-micro')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_A13-OLinuXinoM/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-a20-olinuxino-lime() {
- pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Lime"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-a20-olinuxino-lime' 'uboot-a20-olinuxino-lime-linux-libre')
- replaces=('uboot-a20-olinuxino-lime' 'uboot-a20-olinuxino-lime-linux-libre' 'uboot4grub-a20-olinuxino-lime')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_A20-OLinuXino-Lime/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-a20-olinuxino-lime2() {
- pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Lime2"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-a20-olinuxino-lime2' 'uboot-a20-olinuxino-lime2-linux-libre')
- replaces=('uboot-a20-olinuxino-lime2' 'uboot-a20-olinuxino-lime2-linux-libre' 'uboot4grub-a20-olinuxino-lime2')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_A20-OLinuXino-Lime2/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-a20-olinuxino-micro() {
- pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Micro"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-a20-olinuxino-micro' 'uboot-a20-olinuxino-micro-linux-libre')
- replaces=('uboot-a20-olinuxino-micro' 'uboot-a20-olinuxino-micro-linux-libre' 'uboot4grub-a20-olinuxino-micro')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_A20-OLinuXino_MICRO/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-cubieboard() {
- pkgdesc="U-Boot with Extlinux support for Cubieboard"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-cubieboard' 'uboot-cubieboard-linux-libre')
- replaces=('uboot-cubieboard' 'uboot-cubieboard-linux-libre' 'uboot4grub-cubieboard')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_Cubieboard/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot-sunxi-with-spl.bin
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-cubieboard2() {
- pkgdesc="U-Boot with Extlinux support for Cubieboard 2"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-cubieboard2' 'uboot-cubieboard2-linux-libre')
- replaces=('uboot-cubieboard2' 'uboot-cubieboard2-linux-libre' 'uboot4grub-cubieboard2')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_Cubieboard2/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot-sunxi-with-spl.bin
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-cubietruck() {
- pkgdesc="U-Boot with Extlinux support for Cubietruck"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-cubietruck' 'uboot-cubietruck-linux-libre')
- replaces=('uboot-cubietruck' 'uboot-cubietruck-linux-libre' 'uboot4grub-cubietruck')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_Cubietruck/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot-sunxi-with-spl.bin
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-pcduino() {
- pkgdesc="U-Boot with Extlinux support for pcDuino"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-pcduino' 'uboot-pcduino-linux-libre')
- replaces=('uboot-pcduino' 'uboot-pcduino-linux-libre' 'uboot4grub-pcduino')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_Linksprite_pcDuino/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-pcduino3() {
- pkgdesc="U-Boot with Extlinux support for pcDuino3"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-pcduino3' 'uboot-pcduino3-linux-libre')
- replaces=('uboot-pcduino3' 'uboot-pcduino3-linux-libre' 'uboot4grub-pcduino3')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_Linksprite_pcDuino3/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-pcduino3-nano() {
- pkgdesc="U-Boot with Extlinux support for pcDuino3 Nano"
- install=${pkgbase}.install
- provides=('uboot-sunxi')
- conflicts=('uboot-sunxi' 'uboot-pcduino3-nano' 'uboot-pcduino3-nano-linux-libre')
- replaces=('uboot-pcduino3-nano' 'uboot-pcduino3-nano-linux-libre' 'uboot4grub-pcduino3-nano')
-
- install -d "${pkgdir}"/boot/extlinux
- install -Dm644 bin_Linksprite_pcDuino3_Nano/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot
-
- install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-sunxi/extlinux.conf b/libre/uboot4extlinux-sunxi/extlinux.conf
deleted file mode 100644
index 66f6b30d5..000000000
--- a/libre/uboot4extlinux-sunxi/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyS0,115200
- fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /boot/vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /boot/vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /boot/vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /boot/vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /boot/vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /boot/vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /boot/vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /boot/vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttyS0,115200
-# fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install b/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install
deleted file mode 100644
index e39c2cd2e..000000000
--- a/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install
+++ /dev/null
@@ -1,27 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do you want to do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8"
- fi
- extlinux_warning
-}
-
-## arg 1: the new package version
-post_install() {
- flash_uboot
-}
-
-## arg 1: the new package version
-## arg 2: the old package version
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 7328d1ad7..000000000
--- a/libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,389 +0,0 @@
-diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg
---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+
-+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D
-+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040
-+
-+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3
-+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63
-+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
-+
-+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
-+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
-+
-+
-+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
-+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
-+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000
-+
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
-+
-+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
-+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003
-+
-+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
-+
-+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
-+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
-+
-+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251
-+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200
-+
-+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45
-+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744
-+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336
-+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630
-+
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F
-+
-+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000
-+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000
-+
-+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D
-+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
-+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
-diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg
---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,84 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ *
-+ * Device Configuration Data (DCD)
-+ *
-+ * Each entry must have the format:
-+ * Addr-type Address Value
-+ *
-+ * where:
-+ * Addr-type register length (1,2 or 4 bytes)
-+ * Address absolute address of the register
-+ * value value to be stored in the register
-+ */
-+
-+/*
-+ * DDR3 settings
-+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock),
-+ * memory bus width: 64 bits x16/x32/x64
-+ * MX6DL ddr is limited to 800 MHz(400 MHz clock)
-+ * memory bus width: 64 bits x16/x32/x64
-+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
-+ * memory bus width: 32 bits x16/x32
-+ */
-+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028
-+
-+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028
-+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028
-+
-+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028
-+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028
-+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028
-+
-+/* (differential input) */
-+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
-+/* (differential input) */
-+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
-+/* disable ddr pullups */
-+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
-+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
-+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
-+
-+/* Read data DQ Byte0-3 delay */
-+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
-diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg
---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2013 Boundary Devices
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ *
-+ * Refer doc/README.imximage for more details about how-to configure
-+ * and create imximage boot image
-+ *
-+ * The syntax is taken as close as possible with the kwbimage
-+ */
-+
-+/* image version */
-+IMAGE_VERSION 2
-+
-+/*
-+ * Boot Device : one of
-+ * spi, sd (the board has no nand neither onenand)
-+ */
-+BOOT_FROM sd
-+
-+#define __ASSEMBLY__
-+#include <config.h>
-+#include "asm/arch/mx6-ddr.h"
-+#include "asm/arch/iomux.h"
-+#include "asm/arch/crm_regs.h"
-+
-+#include "ddr-setup_dl.cfg"
-+#include "1066mhz_4x256mx16_dl.cfg"
-+#include "clocks.cfg"
-diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig
---- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024"
-+CONFIG_ARM=y
-+CONFIG_TARGET_UDOO=y
-diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h
---- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200
-+++ u-boot-2015.01/include/configs/udoo.h 2016-02-23 18:24:17.779054304 -0300
-@@ -78,7 +78,7 @@
- #define CONFIG_CMD_BMODE
- #define CONFIG_CMD_SETEXPR
-
--#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTDELAY 1
-
- #define CONFIG_SYS_MEMTEST_START 0x10000000
- #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-@@ -96,60 +96,107 @@
- #define CONFIG_BOUNCE_BUFFER
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
-
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb"
-+#elif defined(CONFIG_MX6Q)
- #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb"
-+#endif
-+
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "script=boot.scr\0" \
-- "image=zImage\0" \
-- "console=ttymxc1\0" \
-+ BOOTENV \
-+ "bootfile=zImage\0" \
-+ "bootdir=/boot\0" \
-+ "console=ttymxc1,115200\0" \
- "splashpos=m,m\0" \
- "fdt_high=0xffffffff\0" \
-+ "rdaddr=0x12A00000\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "initrd_high=0xffffffff\0" \
-- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-- "fdt_addr=0x18000000\0" \
-- "boot_fdt=try\0" \
-+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-+ "fdtdir=/boot/dtbs\0" \
-+ "fdtaddr=0x18000000\0" \
- "ip_dyn=yes\0" \
-+ "optargs=\0" \
-+ "video=\0" \
-+ "devtype=mmc\0" \
-+ "devnum=0\0" \
- "mmcdev=0\0" \
-- "mmcpart=1\0" \
-- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-- "update_sd_firmware_filename=u-boot.imx\0" \
-- "update_sd_firmware=" \
-- "if test ${ip_dyn} = yes; then " \
-- "setenv get_cmd dhcp; " \
-+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
-+ "mmcargs=setenv bootargs console=${console} " \
-+ "${optargs} " \
-+ "root=${mmcroot} " \
-+ "video=${video}\0" \
-+ "videoargs=" \
-+ "setenv nextcon 0; " \
-+ "if hdmidet; then " \
-+ "setenv bootargs ${bootargs} " \
-+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
-+ "if=RGB24; " \
-+ "setenv fbmem fbmem=28M; " \
-+ "setexpr nextcon ${nextcon} + 1; " \
- "else " \
-- "setenv get_cmd tftp; " \
-+ "echo - no HDMI monitor;" \
- "fi; " \
-- "if mmc dev ${mmcdev}; then " \
-- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
-- "setexpr fw_sz ${filesize} / 0x200; " \
-- "setexpr fw_sz ${fw_sz} + 1; " \
-- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-- "fi; " \
-- "fi\0" \
-- "mmcargs=setenv bootargs console=${console},${baudrate} " \
-- "root=${mmcroot}\0" \
-- "loadbootscript=" \
-- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-- "bootscript=echo Running bootscript from mmc ...; " \
-- "source\0" \
-- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-+ "i2c dev 1; " \
-+ "if i2c probe 0x10; then " \
-+ "setenv bootargs ${bootargs} " \
-+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-+ "if=RGB666; " \
-+ "if test 0 -eq ${nextcon}; then " \
-+ "setenv fbmem fbmem=10M; " \
- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-+ "setenv fbmem ${fbmem},10M; " \
- "fi; " \
-+ "setexpr nextcon ${nextcon} + 1; " \
- "else " \
-- "bootz; " \
-+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-+ "fi; " \
-+ "setenv bootargs ${bootargs} ${fbmem}\0" \
-+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=mmc dev ${mmcdev}; " \
-+ "if mmc rescan; then " \
-+ "echo SD/MMC found on device ${mmcdev};" \
-+ "setenv bootpart ${mmcdev}:1; " \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi; " \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "if run loadfdt; then " \
-+ "run mmcargs;" \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "else " \
-+ "echo Kernel found, but no device tree found;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
-@@ -161,10 +208,10 @@
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
-- "${get_cmd} ${image}; " \
-+ "${get_cmd} ${bootfile}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-+ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \
-+ "bootz ${loadaddr} - ${fdtaddr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
-@@ -177,16 +224,7 @@
- "fi;\0"
-
- #define CONFIG_BOOTCOMMAND \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot; " \
-- "else run netboot; " \
-- "fi; " \
-- "fi; " \
-- "else run netboot; fi"
-+ "run mmcboot;"
-
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_LONGHELP
-@@ -227,6 +265,7 @@
-
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
-
- #ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE
diff --git a/libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch b/libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch
deleted file mode 100644
index 30718c561..000000000
--- a/libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001
-From: Sasha Levin <sasha.levin@oracle.com>
-Date: Mon, 13 Oct 2014 15:51:05 -0700
-Subject: [PATCH 2/6] kernel: add support for gcc 5
-
-We're missing include/linux/compiler-gcc5.h which is required now
-because gcc branched off to v5 in trunk.
-
-Just copy the relevant bits out of include/linux/compiler-gcc4.h,
-no new code is added as of now.
-
-This fixes a build error when using gcc 5.
-
-Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
- include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 0000000..cdd1cc2
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,66 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used __attribute__((__used__))
-+#define __must_check __attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ to them will be unlikely. This means a lot of manual unlikely()s
-+ are unnecessary now for any paths leading to the usual suspects
-+ like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ older compilers]
-+
-+ Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ in the preprocessor, but we can live with this because they're unreleased.
-+ Maketime probing would be overkill here.
-+
-+ gcc also has a __attribute__((__hot__)) to move hot functions into
-+ a special section, but I don't see any sense in this right now in
-+ the kernel context */
-+#define __cold __attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable. This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased. Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone __attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ * Fixed in GCC 4.8.2 and later versions.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
---
-2.4.4
-
diff --git a/libre/uboot4extlinux-udoo/PKGBUILD b/libre/uboot4extlinux-udoo/PKGBUILD
deleted file mode 100644
index 41f6960a4..000000000
--- a/libre/uboot4extlinux-udoo/PKGBUILD
+++ /dev/null
@@ -1,69 +0,0 @@
-# U-Boot: UDOO
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgbase=uboot4extlinux-udoo
-pkgname=('uboot4extlinux-udoo_dl' 'uboot4extlinux-udoo_quad')
-pkgver=2015.01
-pkgrel=1
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-makedepends=('bc')
-backup=(boot/extlinux/extlinux.conf)
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- '0002-kernel-add-support-for-gcc-5.patch'
- 'extlinux.conf')
-md5sums=('7f08dc9e98a71652bd6968888ed6ec95'
- 'f90125a266a2cd80980464f949d03d88'
- '721a46867e189d8dedc6b6f86a536a34'
- 'e05d2d41a1bdbbd5d6fec02534784dcd')
-
-prepare() {
- cd u-boot-${pkgver}
-
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
- patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset CFLAGS CXXFLAGS LDFLAGS
-
- mkdir bins
- for i in dl quad; do
- make distclean
- make udoo_${i}_config
- make
- mv u-boot.imx bins/u-boot-${i}.imx
- done
-}
-
-package_uboot4extlinux-udoo_dl() {
- pkgdesc="U-Boot with Extlinux support for UDOO Dual"
- replaces=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec'
- 'uboot-udoo-dual' 'uboot-udoo_dl')
- conflicts=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec'
- 'uboot-udoo-dual' 'uboot-udoo_dl' 'uboot4extlinux-udoo_quad' 'uboot4grub-udoo_dl' 'uboot4grub-udoo_quad')
- install=${pkgbase}.install
-
- mkdir -p "${pkgdir}"/boot/extlinux
- cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}"/boot/u-boot.imx
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-udoo_quad() {
- pkgdesc="U-Boot with Extlinux support for UDOO Quad"
- replaces=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec'
- 'uboot-udoo-quad' 'uboot-udoo_quad')
- conflicts=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec'
- 'uboot-udoo-quad' 'uboot-udoo_quad' 'uboot4extlinux-udoo_dl' 'uboot4grub-udoo_dl' 'uboot4grub-udoo_quad')
- install=${pkgbase}.install
-
- mkdir -p "${pkgdir}"/boot/extlinux
- cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}"/boot/u-boot.imx
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-udoo/extlinux.conf b/libre/uboot4extlinux-udoo/extlinux.conf
deleted file mode 100644
index 45d603094..000000000
--- a/libre/uboot4extlinux-udoo/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
- fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /boot/vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /boot/vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /boot/vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /boot/vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /boot/vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /boot/vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /boot/vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /boot/vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-# fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install b/libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install
deleted file mode 100644
index 8a45c3b16..000000000
--- a/libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install
+++ /dev/null
@@ -1,28 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do you want to do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
- sync
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
- fi
- extlinux_warning
-}
-
-## arg 1: the new package version
-post_install() {
- flash_uboot
-}
-
-## arg 1: the new package version
-## arg 2: the old package version
-post_upgrade() {
- flash_uboot
-}
diff --git a/libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch
deleted file mode 100644
index c50ca9e00..000000000
--- a/libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-diff -Nur u-boot-2015.10.orig/include/configs/mx6_common.h u-boot-2015.10/include/configs/mx6_common.h
---- u-boot-2015.10.orig/include/configs/mx6_common.h 2015-10-19 20:59:38.000000000 -0300
-+++ u-boot-2015.10/include/configs/mx6_common.h 2016-02-26 20:52:16.196805960 -0300
-@@ -68,7 +68,7 @@
- #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
- #ifndef CONFIG_BOOTDELAY
--#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTDELAY 1
- #endif
-
- /* allow to overwrite serial and ethaddr */
-@@ -82,6 +82,8 @@
- #define CONFIG_SUPPORT_RAW_INITRD
- #define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_EXT4
- #define CONFIG_CMD_EXT4_WRITE
-diff -Nur u-boot-2015.10.orig/include/configs/wandboard.h u-boot-2015.10/include/configs/wandboard.h
---- u-boot-2015.10.orig/include/configs/wandboard.h 2015-10-19 20:59:38.000000000 -0300
-+++ u-boot-2015.10/include/configs/wandboard.h 2016-02-26 20:55:20.041265918 -0300
-@@ -86,19 +86,33 @@
- #define CONFIG_IMX_HDMI
- #define CONFIG_IMX_VIDEO_SKIP
-
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- #define CONFIG_EXTRA_ENV_SETTINGS \
-+ BOOTENV \
- "script=boot.scr\0" \
- "image=zImage\0" \
-+ "bootdir=/boot\0" \
- "console=ttymxc0\0" \
- "splashpos=m,m\0" \
- "fdtfile=undefined\0" \
-+ "fdtdir=/boot/dtbs\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_addr=0x18000000\0" \
-+ "rdaddr=0x12A00000\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "boot_fdt=try\0" \
-+ "optargs=\0" \
- "ip_dyn=yes\0" \
-- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-+ "mmcdev=0\0" \
- "mmcpart=1\0" \
- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
- "update_sd_firmware_filename=u-boot.imx\0" \
-@@ -116,7 +130,9 @@
- "fi; " \
- "fi\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
-- "root=${mmcroot}; run videoargs\0" \
-+ "${optargs} " \
-+ "root=${root} " \
-+ "video=${video}\0" \
- "videoargs=" \
- "setenv nextcon 0; " \
- "if hdmidet; then " \
-@@ -143,27 +159,44 @@
- "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
- "fi; " \
- "setenv bootargs ${bootargs} ${fbmem}\0" \
-- "loadbootscript=" \
-- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-- "bootscript=echo Running bootscript from mmc ...; " \
-- "source\0" \
-- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-- "if run loadfdt; then " \
-- "bootz ${loadaddr} - ${fdt_addr}; " \
-- "else " \
-- "if test ${boot_fdt} = try; then " \
-- "bootz; " \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${image}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdt_addr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "part uuid ${devtype} ${bootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdt_addr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdt_addr};" \
-+ "fi;" \
-+ "fi;" \
- "else " \
-- "echo WARN: Cannot load the DT; " \
-- "fi; " \
-- "fi; " \
-- "else " \
-- "bootz; " \
-- "fi;\0" \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-@@ -202,16 +235,7 @@
-
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot; " \
-- "else run netboot; " \
-- "fi; " \
-- "fi; " \
-- "else run netboot; fi"
-+ "run mmcboot;"
-
- /* Physical Memory Map */
- #define CONFIG_NR_DRAM_BANKS 1
diff --git a/libre/uboot4extlinux-wandboard/PKGBUILD b/libre/uboot4extlinux-wandboard/PKGBUILD
deleted file mode 100644
index b97e0b1df..000000000
--- a/libre/uboot4extlinux-wandboard/PKGBUILD
+++ /dev/null
@@ -1,46 +0,0 @@
-# U-Boot: Wandboard
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot4extlinux-wandboard
-pkgver=2015.10
-pkgrel=1
-pkgdesc="U-Boot with Extlinux support for Wandboard"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-makedepends=('bc')
-replaces=('uboot-wandboard-solo' 'uboot-wandboard-dual' 'uboot-wandboard-quad' 'uboot-wandboard' 'uboot-wandboard-linux-libre')
-conflicts=('uboot-wandboard' 'uboot-wandboard-linux-libre' 'uboot4grub-wandboard')
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf')
-md5sums=('7c203b0fc3390a122d8e8b75f147eac5'
- 'b456e16c44508868ce6d265da625d768'
- '3367c0142a98a62fed243be74f5c465d')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS
-
- make distclean
- make wandboard_defconfig
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
-
- mkdir -p "${pkgdir}"/boot
- cp SPL u-boot.img "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot4extlinux-wandboard/extlinux.conf b/libre/uboot4extlinux-wandboard/extlinux.conf
deleted file mode 100644
index 16cc3a38f..000000000
--- a/libre/uboot4extlinux-wandboard/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /boot/vmlinuz-linux-libre
- append root=/dev/mmcblk0p2 rw console=ttymxc0
- fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /boot/vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /boot/vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /boot/vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /boot/vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /boot/vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /boot/vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /boot/vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /boot/vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p2 rw console=ttymxc0
-# fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install b/libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install
deleted file mode 100644
index ddfb5c83f..000000000
--- a/libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install
+++ /dev/null
@@ -1,29 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
- echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
- echo "Do this now? [y|N]"
- read -r shouldwe
- if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
- dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k
- dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k
- else
- echo "You can do this later by running:"
- echo "# dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k"
- echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k"
- fi
- extlinux_warning
-}
-
-## arg 1: the new package version
-post_install() {
- flash_uboot
-}
-
-## arg 1: the new package version
-## arg 2: the old package version
-post_upgrade() {
- flash_uboot
-}