diff options
Diffstat (limited to 'libre')
| -rw-r--r-- | libre/uboot4extlinux-sunxi/PKGBUILD | 206 |
1 files changed, 201 insertions, 5 deletions
diff --git a/libre/uboot4extlinux-sunxi/PKGBUILD b/libre/uboot4extlinux-sunxi/PKGBUILD index 78c9ead9e..22cd02aa2 100644 --- a/libre/uboot4extlinux-sunxi/PKGBUILD +++ b/libre/uboot4extlinux-sunxi/PKGBUILD @@ -56,7 +56,7 @@ pkgname=("${pkgbase}" 'uboot4extlinux-orangepi_plus') pkgver=2021.07 -pkgrel=2 +pkgrel=3 arch=('armv7h' 'i686' 'x86_64') url="http://git.denx.de/u-boot.git/" license=('GPL') @@ -64,13 +64,15 @@ makedepends=('bc' 'dtc' 'python' 'python-setuptools' 'python2' 'swig') makedepends_i686+=('arm-none-eabi-gcc') makedepends_ppc64le+=('arm-none-eabi-gcc') makedepends_x86_64+=('arm-none-eabi-gcc') -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - 'extlinux.conf' +mksource=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2") +noextract=("u-boot-${pkgver}.tar.bz2") +mksha256sums=('312b7eeae44581d1362c3a3f02c28d806647756c82ba8c72241c7cdbe68ba77e') + +source=('extlinux.conf' "${pkgbase}.hook.in" 'install-uboot4extlinux.sh.in' "generate-${pkgbase}-install-text.sh") -sha256sums=('312b7eeae44581d1362c3a3f02c28d806647756c82ba8c72241c7cdbe68ba77e' - 'SKIP' +sha256sums=('SKIP' 'SKIP' 'SKIP' 'SKIP') @@ -155,6 +157,200 @@ _build_uboot_target() } +mksource() +{ + cd u-boot-${pkgver} + + # The licenses of some microcodes are nonfree because the header contains the + # following: ".No reverse engineering, decompilation, or disassembly of this + # software is permitted." + rm -rf arch/x86/dts/microcode/ + + # The license is nonfree because it contains the following: "Reverse + # engineering, decompilation, or disassembly of this software is not + # permitted." + rm -f Licenses/r8a779x_usb3.txt + rm -f drivers/usb/host/xhci-rcar-r8a779x_usb3_v3.h + + # The documentation contains instructions to download and install nonfree + # software. Note that if a board doesn't have such instructions it doesn't + # necessarily means that it can boot with only free software and viceversa. + + ########### + # Amlogic # + ########### + # Amlogic SOCs Usually have various nonfree components, like the first stages + # of the bootloaders and code that runs in TrustZone. They are most likely + # not signed. + # --------- + # TODO: List the nonfree software of specific documentation + rm -f doc/board/amlogic/beelink-gtkingpro.rst + rm -f doc/board/amlogic/beelink-gtking.rst + rm -f doc/board/amlogic/index.rst + rm -f doc/board/amlogic/khadas-vim2.rst + rm -f doc/board/amlogic/khadas-vim3l.rst + rm -f doc/board/amlogic/khadas-vim3.rst + rm -f doc/board/amlogic/khadas-vim.rst + rm -f doc/board/amlogic/libretech-ac.rst + rm -f doc/board/amlogic/libretech-cc.rst + rm -f doc/board/amlogic/nanopi-k2.rst + rm -f doc/board/amlogic/odroid-c2.rst + rm -f doc/board/amlogic/odroid-c4.rst + rm -f doc/board/amlogic/odroid-n2.rst + rm -f doc/board/amlogic/p200.rst + rm -f doc/board/amlogic/p201.rst + rm -f doc/board/amlogic/p212.rst + rm -f doc/board/amlogic/q200.rst + rm -f doc/board/amlogic/s400.rst + rm -f doc/board/amlogic/sei510.rst + rm -f doc/board/amlogic/sei610.rst + rm -f doc/board/amlogic/u200.rst + rm -f doc/board/amlogic/w400.rst + rm -f doc/board/amlogic/wetek-core2.rst + + ######### + # Linux # + ######### + # Has intructions to build Linux which is not FSDG compliant. + # TODO: Use linux-libre instead, especially because documentation about vboot + # could be interesting to have. Vboot is a chain of trust that can work with + # only free software. The hardware root of trust can be created by booting on + # a flash chip whose security registers are configured to set the first + # bootloader component read-only. + rm -f doc/uImage.FIT/beaglebone_vboot.txt + # Steers very strongly users into using Linux as it shows that the only tested + # kernels are Broadcom forks of Linux. We would need to have linux-libre + # versions of these or test it with stock linux-libre instead. + rm -f doc/README.bcm7xxx + + ############ + # Mediatek # + ############ + # The instructions uses binaries that lack any corresponding source code. + rm -f doc/README.mediatek + + ############# + # NXP I.MX8 # + ############# + # I.MX8 SOCs require a nonfree firmware for the DDR4 controller. In some + # documentation, I didn't find that requirement mentioned, but instead + # there are still nonfree files mentioned. So I assume that they might + # somehow contain code for that nonfree DDR4 controller, but it might be + # worth checking if it's the case or not. The DDR4 controller firmware is not + # signed. In addition the I.MX8 HDMI controller requires a signed firmware. + # ----------- + # nonfree DDR4 controller firmware + rm -f doc/board/freescale/imx8mp_evk.rst + # nonfree DDR4 controller and HDMI firmwares + rm -f doc/board/freescale/imx8mq_evk.rst + # nonfree DDR4 controller firmware + rm -f doc/board/freescale/imx8mn_evk.rst + # nonfree imx-sc-firmware-1.2.7.1.bin and imx-seco-2.3.1.bin firmwares + rm -f doc/board/freescale/imx8qxp_mek.rst + # nonfree DDR4 controller firmware + rm -f doc/board/freescale/imx8mm_evk.rst + # nonfree imx-sc-firmware-1.1.bin and firmware-imx-8.0.bin firmwares + rm -f doc/board/advantech/imx8qm-rom7720-a1.rst + # TODO + rm -f doc/board/verdin-imx8mm.rst + rm -f doc/board/toradex/colibri-imx8x.rst + rm -f doc/board/toradex/apalix-imx8x.rst + rm -f doc/board/toradex/apalix-imx8.rst + + ####################### + # NXP nonfree srktool # + ####################### + # The SRK tool is a tool that is involved in one way or another with + # authenticated or encrypted boot. I'm unsure if free software replacements + # exists or if could easily be replaced with a free software implementation. + # In any case the I.MX6 and I.MX5 can proabably be setup for encrypted or + # authenticated boot with free software tools. The first and second versions + # of the USB Armory has documentation on how to do that. + # --------------------- + rm -f doc/imx/board/toradex/colibri_imx7.rst + rm -f doc/imx/habv4/introduction_habv4.txt + + ################## + # Samsung Exynos # + ################## + # The instructions makes users nonfree components like a nonfree first stage + # bootloaders, and nonfree code that runs in TrustZone. + rm -f doc/README.odroid + # The instructions makes its users download an image and update u-boot in that + # image. Because of that, it's extremely likely that the images contains + # nonfree components that cannot even be redistributed in another form, and + # that the instructions uses that images because of that. + rm -f doc/README.s5p4418 + + ##################### + # Texas Instruments # + ##################### + # Users are expected to use nonfree tools and even sign an NDA to get access + # to them. + rm -f doc/README.ti-secure + + ########### + # Unknown # + ########### + # Everything looks free software, but the code still needs to be reviewed. + rm -f doc/board/microchip/mpfs_icicle.rst + # OP-TEE is under a free software license but its code needs to be reviewed. + rm -f doc/README.tee + # The tutorial has instructions to download a downstream u-boot, so it might + # have the same issues than u-boot itself if the u-boot is recent enough. + rm -f doc/chromium/run_vboot.rst + + ####### + # x86 # + ####### + # Unless the computer is supported by Libreboot, or that u-boot runs after + # some other nonfree boot software like a BIOS or UEFI, it's unlikely to be + # able to run with only free software. Though I'm pretty sure that some + # exceptions do exists, but they are probably not supported by u-boot. + # ----- + # nonfree Management Engine firmware, RAM intialization code, and video BIOS + rm -f doc/board/google/chromebook_link.rst + # nonfree SDRAM and hardware intialization code + rm -f doc/board/google/chromebook_coral.rst + + # nonfree FSP, video BIOS, Management Engine firmware + rm -f doc/board/intel/minnowmax.rst + # nonfree FSP, Chipset Micro Code (CMC), microcode + rm -f doc/board/intel/crownbay.rst + + # TODO: check + # board/intel/edison.rst + # Steers userstoward using nonfree FSP + rm -f board/intel/slimbootloader.rst + + # Steers users and developers toward using nonfree FSP + rm -f doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-m.txt + + # Steers users and developers toward using nonfree FSP + rm -f doc/device-tree-bindings/fsp/fsp2/apollolake/fsp-s.txt + + ############ + # Rockchip # + ############ + # rkbin binaries without license nor source code + rm -f doc/board/rockchip/rockchip.rst + + # TODO: check the following files + # imx/common/mxs.txt + # README.armada-secureboot + # README.fdt-control + # README.fsl-ddr + # README.m54418twr + # README.marvell + # README.mpc85xxcds + # README.mpc85xx-sd-spi-boot + # README.OFT + # README.rmobile + # README.rockchip + # README.rockusb + # README.socfpga +} + build() { cd u-boot-${pkgver} |