diff options
Diffstat (limited to 'libre/uboot4extlinux-sunxi/PKGBUILD')
| -rw-r--r-- | libre/uboot4extlinux-sunxi/PKGBUILD | 600 |
1 files changed, 370 insertions, 230 deletions
diff --git a/libre/uboot4extlinux-sunxi/PKGBUILD b/libre/uboot4extlinux-sunxi/PKGBUILD index f3d069855..a9577d4d3 100644 --- a/libre/uboot4extlinux-sunxi/PKGBUILD +++ b/libre/uboot4extlinux-sunxi/PKGBUILD @@ -2,9 +2,38 @@ # Maintainer: Isaac David <isacdaavid@at@isacdaavid@dot@info> # Contributor: André Silva <emulatorman@hyperbola.info> # Contributor: Timothy Redaelli <timothy.redaelli@gmail.com> +# Contributor: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> + +# To add a new board (that uses an Allwinner System On a Chip) you need: +# - The package name. Example: uboot4extlinux-a20-olinuxino_micro +# - The u-boot configuration. Example: A20-OLinuXino_MICRO_defconfig +# - The name of the board(s). Example: A20 OLinuXino Micro +# A single package / u-boot configuration sometimes support multiple +# boards and the configuration name doesn't always have the boards names +# in it. Example: uboot4extlinux-am335x_bone supports various BeagleBones, +# the AM335x GP EVM and the EVM SK all in one u-boot binary and package. +# - If relevant, the packages it replaces, if there are older u-boot packages +# also supporting that board. Example:uboot-a20-olinuxino-micro +# +# Ideally we'd like to enable people to only add these 4 variables in this +# package to add a new board. These 4 variables could go in something like +# a CVS file that is parsed, but that would require to be able to dynamically +# define packages, but even if eval package_{$_pkgname}() { [...] } works, +# it doesn't make that package function visible to makepkg. +# +# Because of that, contributors wanting to add new boards will have to search +# for example of the information mentioned above and add it in the PKGBUILD +# for their boards. +# +# After adding a new board in this PKGBUILD, to get the board officially +# supported by Parabola.you also need to create a page for it in the +# Parabola wiki for that board and update the ARM installation guide to +# point to it when relevant. Examples of that are available for other +# boards in the ARM installation guide. pkgbase=uboot4extlinux-sunxi -pkgname=('uboot4extlinux-a10-olinuxino-lime' +pkgname=("${pkgbase}" + 'uboot4extlinux-a10-olinuxino-lime' 'uboot4extlinux-a10s-olinuxino-m' 'uboot4extlinux-a13-olinuxino' 'uboot4extlinux-a13-olinuxinom' @@ -25,330 +54,441 @@ pkgname=('uboot4extlinux-a10-olinuxino-lime' 'uboot4extlinux-orangepi_one' 'uboot4extlinux-orangepi_pc' 'uboot4extlinux-orangepi_plus') + pkgver=2020.04 pkgrel=1 -arch=('armv7h') +arch=('armv7h' 'i686' 'ppc64le' 'x86_64') url="http://git.denx.de/u-boot.git/" license=('GPL') makedepends=('bc' 'dtc' 'python' 'python2' 'swig') -backup=(boot/extlinux/extlinux.conf) +makedepends_i686+=('arm-none-eabi-gcc') +makedepends_ppc64le+=('arm-none-eabi-gcc') +makedepends_x86_64+=('arm-none-eabi-gcc') source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - 'extlinux.conf') + 'extlinux.conf' + "${pkgbase}.hook.in" + 'install-uboot4extlinux.sh.in' + "generate-${pkgbase}-install-text.sh") sha256sums=('fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372' + 'SKIP' + 'SKIP' + 'SKIP' 'SKIP') -boards=('A10-OLinuXino-Lime' - 'A10s-OLinuXino-M' - 'A13-OLinuXino' - 'A13-OLinuXinoM' - 'A20-OLinuXino-Lime' - 'A20-OLinuXino-Lime2' - 'A20-OLinuXino-Lime2-eMMC' - 'A20-OLinuXino_MICRO' - 'Bananapi' - 'Bananapro' - 'CHIP' - 'Cubieboard' - 'Cubieboard2' - 'Cubietruck' - 'Linksprite_pcDuino' - 'Linksprite_pcDuino3' - 'Linksprite_pcDuino3_Nano' - 'orangepi_2' - 'orangepi_one' - 'orangepi_pc' - 'orangepi_plus') - -build() { - cd u-boot-${pkgver} +_defconfigs=('A10-OLinuXino-Lime_defconfig' + 'A10s-OLinuXino-M_defconfig' + 'A13-OLinuXino_defconfig' + 'A13-OLinuXinoM_defconfig' + 'A20-OLinuXino-Lime_defconfig' + 'A20-OLinuXino-Lime2_defconfig' + 'A20-OLinuXino-Lime2-eMMC_defconfig' + 'A20-OLinuXino_MICRO_defconfig' + 'Bananapi_defconfig' + 'Bananapro_defconfig' + 'CHIP_defconfig' + 'Cubieboard_defconfig' + 'Cubieboard2_defconfig' + 'Cubietruck_defconfig' + 'Linksprite_pcDuino_defconfig' + 'Linksprite_pcDuino3_defconfig' + 'Linksprite_pcDuino3_Nano_defconfig' + 'orangepi_2_defconfig' + 'orangepi_one_defconfig' + 'orangepi_pc_defconfig' + 'orangepi_plus_defconfig') + +# Offset at which to install u-boot +u_boot_with_spl_offset=8192 + +case "$CARCH" in + armv7h) ARCH=arm;; + i686|ppc64le|x86_64) ARCH=arm;CROSS_COMPILE=arm-none-eabi-;; +esac + +_nr_targets=0 +for _defconfig in ${_defconfigs[@]}; do + _nr_targets=$(expr ${_nr_targets} + 1) +done + +_get_target_name() +{ + _defconfig="$1" + + echo ${_defconfig} | \ + sed 's/_defconfig$//' | \ + awk '{print tolower($0)}' +} + +_get_target_destdir() +{ + _defconfig="$1" + + _target_name="$(_get_target_name ${_defconfig})" + + echo "build/uboot4extlinux-${_target_name}" +} + +_build_uboot_target() +{ + _defconfig="$1" + + _destdir="$(_get_target_destdir ${_defconfig})" + _target_name="$(_get_target_name ${_defconfig})" - unset CFLAGS CXXFLAGS LDFLAGS + unset CFLAGS CXXFLAGS LDFLAGS + + make "ARCH=${ARCH}" distclean + make "ARCH=${ARCH}" ${_defconfig} - for i in ${boards[@]}; do - mkdir -p ../bin_${i} - make distclean - make ${i}_defconfig echo 'CONFIG_IDENT_STRING=" Parabola GNU/Linux-libre"' >> .config - make EXTRAVERSION=-${pkgrel} - mv -f u-boot-sunxi-with-spl.bin ../bin_${i} + + if [ "$CARCH" = "armv7h" ]; then + make "ARCH=${ARCH}" EXTRAVERSION=-${pkgrel} + else + make "ARCH=${ARCH}" "CROSS_COMPILE=${CROSS_COMPILE}" \ + EXTRAVERSION=-${pkgrel} + fi + + echo "==> Installing ${_target_name} to ${_destdir}" + install -d ${_destdir} + mv -f u-boot-sunxi-with-spl.bin "${_destdir}" + +} + +build() +{ + cd u-boot-${pkgver} + + _target_nr=0 + for _defconfig in ${_defconfigs[@]}; do + _target_nr=$(expr ${_target_nr} + 1) + _target_name="$(_get_target_name ${_defconfig})" + + echo "==> Building ${_target_name} " \ + "[${_target_nr} of ${_nr_targets} targets]" + + _build_uboot_target "${_defconfig}" + done +} + +_check_uboot_target() +{ + _defconfig="$1" + + _image="$(_get_target_destdir ${_defconfig})/u-boot-sunxi-with-spl.bin" + _image_size="$(du --bytes --apparent-size ${_image} | awk '{print $1}')" + _offset="${u_boot_with_spl_offset}" + + _image_end=$(expr ${_image_size} + ${_offset}) + + # This test comes from install-uboot4extlinux.sh.in + if [ ${_image_end} -gt $(expr 1024 \* 1024) ] ; then + echo "Error: ${_image} is too big:" + echo " offset: ${_offset}" + echo " size: ${_image_size}" + echo " By default, "\ + "partitioing tools makes the first partition start at 1MiB" + echo " Instaling ${_image} "\ + "would overwrite that first partition (if it's present)." + + false # Fail the test + fi +} + +check() +{ + cd u-boot-${pkgver} + + _target_nr=0 + for _defconfig in ${_defconfigs[@]}; do + _target_nr=$(expr ${_target_nr} + 1) + _target_name="$(_get_target_name ${_defconfig})" + + echo "==> Testing target ${_target_name} " \ + "[${_target_nr} of ${_nr_targets} targets]" + _check_uboot_target "${_defconfig}" done + } -package_uboot4extlinux-a10-olinuxino-lime() { - pkgdesc="U-Boot with Extlinux support for A10 OLinuXino Lime" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +_make_uboot_package() +{ + _pkgname="$1" + + if [ -n "${pkgdir}" ] ; then + cd "u-boot-${pkgver}" + + # Install the u-boot binary + install -d "${pkgdir}/usr/lib/u-boot/${_pkgname}/" + install -Dm644 "build/${_pkgname}/u-boot-sunxi-with-spl.bin" \ + "${pkgdir}/usr/lib/u-boot/${_pkgname}" + + # Install the u-boot installation script + sed < "${srcdir}/install-uboot4extlinux.sh.in" > \ + "${pkgdir}/usr/lib/u-boot/${_pkgname}/install-uboot4extlinux.sh" \ + -e "s|@u_boot_with_spl[@]|/usr/lib/u-boot/${_pkgname}/u-boot-sunxi-with-spl.bin|g" \ + -e "s|@u_boot_with_spl_offset[@]|${u_boot_with_spl_offset}|g" + + chmod +x \ + "${pkgdir}/usr/lib/u-boot/${_pkgname}/install-uboot4extlinux.sh" + + # Install what is required for the pacman hook + install -d "${pkgdir}/usr/share/libalpm/hooks/" + sed < "${srcdir}/${pkgbase}.hook.in" > \ + "${pkgdir}/usr/share/libalpm/hooks/${_pkgname}.hook" \ + -e "s|@pkgname[@]|${_pkgname}|g" + + install -d "${pkgdir}/usr/share/doc/u-boot/${_pkgname}/" + # If we install several uboot4extlinux, we need a way to clearly + # separate each postinstall message. To do that we wrapped the + # text in an ASCII art square, but doing that is complicated when + # using sed as the package name as well as the installation script + # path both have variable length. + sh "${srcdir}/generate-${pkgbase}-install-text.sh" \ + "${_pkgname}" \ + "${pkgbase}" \ + "/usr/lib/u-boot/${_pkgname}/install-uboot4extlinux.sh" > \ + "${pkgdir}/usr/share/doc/u-boot/${_pkgname}/install-uboot4extlinux.txt" + fi +} + +_make_pkgdesc() +{ + board_name="$1" + echo "U-Boot with Extlinux support for ${board_name}" +} - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A10-OLinuXino-Lime/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ +package_uboot4extlinux-sunxi() +{ + pkgdesc="Scripts for managing U-Boot installations for computers with Allwinner System On a Chip" - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + depends=('uboot-tools') + + # Users are expected to use this as a base for /boot/extlinux/extlinux.conf + install -d "${pkgdir}/usr/lib/u-boot/${pkgname}/" + install -Dm644 \ + "${srcdir}/extlinux.conf" \ + "${pkgdir}/usr/lib/u-boot/${pkgname}/" } -package_uboot4extlinux-a10s-olinuxino-m() { - pkgdesc="U-Boot with Extlinux support for A10s OLinuXino Micro" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') - replaces=('uboot4extlinux-a10s-olinuxino-micro') +package_uboot4extlinux-a10-olinuxino-lime() +{ + pkgdesc=$(_make_pkgdesc "A10 OLinuXino Lime") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A10s-OLinuXino-M/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-a13-olinuxino() { - pkgdesc="U-Boot with Extlinux support for A13 OLinuXino" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-a10s-olinuxino-m() +{ + pkgdesc=$(_make_pkgdesc "A10s OLinuXino Micro") + + replaces=('uboot4extlinux-a10s-olinuxino-micro') - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A13-OLinuXino/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-a13-olinuxinom() { - pkgdesc="U-Boot with Extlinux support for A13 OLinuXino Micro" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') - replaces=('uboot4extlinux-a13-olinuxino-micro') +package_uboot4extlinux-a13-olinuxino() +{ + pkgdesc=$(_make_pkgdesc "A13 OLinuXino") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A13-OLinuXinoM/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-a20-olinuxino-lime() { - pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Lime" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-a13-olinuxinom() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-a13-olinuxino-micro") + + replaces=('uboot4extlinux-a13-olinuxino-micro') - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A20-OLinuXino-Lime/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-a20-olinuxino-lime2() { - pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Lime2" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-a20-olinuxino-lime() +{ + pkgdesc=$(_make_pkgdesc "A20 OLinuXino Lime") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A20-OLinuXino-Lime2/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-a20-olinuxino-lime2-emmc() { - pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Lime2 with eMMC" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-a20-olinuxino-lime2() +{ + pkgdesc=$(_make_pkgdesc "A20 OLinuXino Lime2") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A20-OLinuXino-Lime2-eMMC/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-a20-olinuxino_micro() { - pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Micro" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') - replaces=('uboot-a20-olinuxino-micro') +package_uboot4extlinux-a20-olinuxino-lime2-emmc() +{ + pkgdesc=$(_make_pkgdesc "A20 OLinuXino Lime2 with eMMC") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_A20-OLinuXino_MICRO/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-bananapi() { - pkgdesc="U-Boot with Extlinux support for Banana Pi" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-a20-olinuxino_micro() +{ + pkgdesc=$(_make_pkgdesc "uboot-a20-olinuxino-micro") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Bananapi/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + replaces=('uboot-a20-olinuxino-micro') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-bananapro() { - pkgdesc="U-Boot with Extlinux support for Banana Pro" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-bananapi() +{ + pkgdesc=$(_make_pkgdesc "Banana Pi") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Bananapro/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-chip() { - pkgdesc="U-Boot with Extlinux support for C.H.I.P" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-bananapro() +{ + pkgdesc=$(_make_pkgdesc "Banana Pro") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_CHIP/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-cubieboard() { - pkgdesc="U-Boot with Extlinux support for Cubieboard" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-chip() +{ + PKGDESC=$(_make_pkgdesc "C.H.I.P") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Cubieboard/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-cubieboard2() { - pkgdesc="U-Boot with Extlinux support for Cubieboard 2" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-cubieboard() +{ + pkgdesc=$(_make_pkgdesc "Cubieboard") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Cubieboard2/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-cubietruck() { - pkgdesc="U-Boot with Extlinux support for Cubietruck" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-cubieboard2() +{ + pkgdesc=$(_make_pkgdesc "Cubieboard 2") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Cubietruck/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-linksprite_pcduino() { - pkgdesc="U-Boot with Extlinux support for pcDuino" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') - replaces=('uboot4extlinux-pcduino') +package_uboot4extlinux-cubietruck() +{ + pkgdesc=$(_make_pkgdesc "Cubietruck") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Linksprite_pcDuino/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-linksprite_pcduino3() { - pkgdesc="U-Boot with Extlinux support for pcDuino3" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') - replaces=('uboot4extlinux-pcduino3') +package_uboot4extlinux-linksprite_pcduino() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-pcduino") + + replaces=('uboot4extlinux-pcduino') - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Linksprite_pcDuino3/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-linksprite_pcduino3_nano() { - pkgdesc="U-Boot with Extlinux support for pcDuino3 Nano" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') - replaces=('uboot4extlinux-pcduino3-nano') +package_uboot4extlinux-linksprite_pcduino3() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-pcduino3") + + replaces=('uboot4extlinux-pcduino3') + + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') + + _make_uboot_package "${pkgname}" +} + +package_uboot4extlinux-linksprite_pcduino3_nano() +{ + pkgdesc=$(_make_pkgdesc "uboot4extlinux-pcduino3-nano") + + replaces=('uboot4extlinux-pcduino3-nano') - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_Linksprite_pcDuino3_Nano/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-orangepi_2() { - pkgdesc="U-Boot with Extlinux for Orange Pi 2" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-orangepi_2() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi 2") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_orangepi_2/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-orangepi_one() { - pkgdesc="U-Boot with Extlinux for Orange Pi One" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-orangepi_one() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi One") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_orangepi_one/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-orangepi_pc() { - pkgdesc="U-Boot with Extlinux for Orange Pi PC" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-orangepi_pc() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi PC") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_orangepi_pc/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } -package_uboot4extlinux-orangepi_plus() { - pkgdesc="U-Boot with Extlinux for Orange Pi Plus" - install=${pkgbase}.install - provides=('uboot4extlinux-sunxi') - conflicts=('uboot-sunxi' 'uboot4extlinux-sunxi' 'uboot4grub-sunxi') +package_uboot4extlinux-orangepi_plus() +{ + pkgdesc=$(_make_pkgdesc "Orange Pi Plus") - install -d "${pkgdir}"/boot/extlinux - install -d "${pkgdir}"/boot/u-boot/images/ - install -Dm644 bin_orangepi_plus/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot/images/ + # util-linux is needed for blkid for install-uboot4extlinux.sh + depends=("${pkgbase}" 'util-linux') - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux + _make_uboot_package "${pkgname}" } |