diff options
Diffstat (limited to 'libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch')
-rw-r--r-- | libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch | 423 |
1 files changed, 0 insertions, 423 deletions
diff --git a/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch b/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch deleted file mode 100644 index fc41962ef..000000000 --- a/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch +++ /dev/null @@ -1,423 +0,0 @@ -diff -Nur u-boot-2014.07.orig/include/config_distro_bootcmd.h u-boot-2014.07/include/config_distro_bootcmd.h ---- u-boot-2014.07.orig/include/config_distro_bootcmd.h 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2014.07/include/config_distro_bootcmd.h 2015-04-13 11:53:03.000000000 -0300 -@@ -0,0 +1,236 @@ -+/* -+ * (C) Copyright 2014 -+ * NVIDIA Corporation <www.nvidia.com> -+ * -+ * Copyright 2014 Red Hat, Inc. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H -+#define _CONFIG_CMD_DISTRO_BOOTCMD_H -+ -+/* -+ * A note on error handling: It is possible for BOOT_TARGET_DEVICES to -+ * reference a device that is not enabled in the U-Boot configuration, e.g. -+ * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given -+ * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor -+ * at compile time, it's not possible to detect and report such problems via -+ * a simple #ifdef/#error combination. Still, the code needs to report errors. -+ * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to -+ * reference a non-existent symbol, and have the name of that symbol encode -+ * the error message. Consequently, this file contains references to e.g. -+ * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the -+ * prevalence of capitals here, this looks like a pre-processor macro and -+ * hence seems like it should be all capitals, but it's really an error -+ * message that includes some other pre-processor symbols in the text. -+ */ -+ -+/* We need the part command */ -+#define CONFIG_PARTITION_UUIDS -+#define CONFIG_CMD_PART -+ -+#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \ -+ "if " #devtypel " dev ${devnum}; then " \ -+ "setenv devtype " #devtypel "; " \ -+ "run scan_dev_for_boot_part; " \ -+ "fi\0" -+ -+#define BOOTENV_SHARED_BLKDEV(devtypel) \ -+ #devtypel "_boot=" \ -+ BOOTENV_SHARED_BLKDEV_BODY(devtypel) -+ -+#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \ -+ "bootcmd_" #devtypel #instance "=" \ -+ "setenv devnum " #instance "; " \ -+ "run " #devtypel "_boot\0" -+ -+#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \ -+ #devtypel #instance " " -+ -+#ifdef CONFIG_CMD_MMC -+#define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc) -+#define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_SHARED_MMC -+#define BOOTENV_DEV_MMC \ -+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC -+#define BOOTENV_DEV_NAME_MMC \ -+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC -+#endif -+ -+#ifdef CONFIG_CMD_SATA -+#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata) -+#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_SHARED_SATA -+#define BOOTENV_DEV_SATA \ -+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA -+#define BOOTENV_DEV_NAME_SATA \ -+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA -+#endif -+ -+#ifdef CONFIG_CMD_SCSI -+#define BOOTENV_RUN_SCSI_INIT "run scsi_init; " -+#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; " -+#define BOOTENV_SHARED_SCSI \ -+ "scsi_init=" \ -+ "if ${scsi_need_init}; then " \ -+ "setenv scsi_need_init false; " \ -+ "scsi scan; " \ -+ "fi\0" \ -+ \ -+ "scsi_boot=" \ -+ BOOTENV_RUN_SCSI_INIT \ -+ BOOTENV_SHARED_BLKDEV_BODY(scsi) -+#define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_RUN_SCSI_INIT -+#define BOOTENV_SET_SCSI_NEED_INIT -+#define BOOTENV_SHARED_SCSI -+#define BOOTENV_DEV_SCSI \ -+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI -+#define BOOTENV_DEV_NAME_SCSI \ -+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI -+#endif -+ -+#ifdef CONFIG_CMD_IDE -+#define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide) -+#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_SHARED_IDE -+#define BOOTENV_DEV_IDE \ -+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE -+#define BOOTENV_DEV_NAME_IDE \ -+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE -+#endif -+ -+#ifdef CONFIG_CMD_USB -+#define BOOTENV_RUN_USB_INIT "usb start; " -+#define BOOTENV_SHARED_USB \ -+ "usb_boot=" \ -+ BOOTENV_RUN_USB_INIT \ -+ BOOTENV_SHARED_BLKDEV_BODY(usb) -+#define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_RUN_USB_INIT -+#define BOOTENV_SHARED_USB -+#define BOOTENV_DEV_USB \ -+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB -+#define BOOTENV_DEV_NAME_USB \ -+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB -+#endif -+ -+#if defined(CONFIG_CMD_DHCP) -+#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \ -+ "bootcmd_dhcp=" \ -+ BOOTENV_RUN_USB_INIT \ -+ "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \ -+ "source ${scriptaddr}; " \ -+ "fi\0" -+#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ -+ "dhcp " -+#else -+#define BOOTENV_DEV_DHCP \ -+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP -+#define BOOTENV_DEV_NAME_DHCP \ -+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP -+#endif -+ -+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE) -+#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \ -+ "bootcmd_pxe=" \ -+ BOOTENV_RUN_USB_INIT \ -+ "dhcp; " \ -+ "if pxe get; then " \ -+ "pxe boot; " \ -+ "fi\0" -+#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \ -+ "pxe " -+#else -+#define BOOTENV_DEV_PXE \ -+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE -+#define BOOTENV_DEV_NAME_PXE \ -+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE -+#endif -+ -+#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \ -+ BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance) -+#define BOOTENV_BOOT_TARGETS \ -+ "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" -+ -+#define BOOTENV_DEV(devtypeu, devtypel, instance) \ -+ BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance) -+#define BOOTENV \ -+ BOOTENV_SHARED_MMC \ -+ BOOTENV_SHARED_USB \ -+ BOOTENV_SHARED_SATA \ -+ BOOTENV_SHARED_SCSI \ -+ BOOTENV_SHARED_IDE \ -+ "boot_prefixes=/ /boot/\0" \ -+ "boot_scripts=boot.scr.uimg boot.scr\0" \ -+ "boot_script_dhcp=boot.scr.uimg\0" \ -+ BOOTENV_BOOT_TARGETS \ -+ \ -+ "boot_extlinux=" \ -+ "sysboot ${devtype} ${devnum}:${bootpart} any " \ -+ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \ -+ \ -+ "scan_dev_for_extlinux=" \ -+ "if test -e ${devtype} ${devnum}:${bootpart} " \ -+ "${prefix}extlinux/extlinux.conf; then " \ -+ "echo Found ${prefix}extlinux/extlinux.conf; " \ -+ "run boot_extlinux; " \ -+ "echo SCRIPT FAILED: continuing...; " \ -+ "fi\0" \ -+ \ -+ "boot_a_script=" \ -+ "load ${devtype} ${devnum}:${bootpart} " \ -+ "${scriptaddr} ${prefix}${script}; " \ -+ "source ${scriptaddr}\0" \ -+ \ -+ "scan_dev_for_scripts=" \ -+ "for script in ${boot_scripts}; do " \ -+ "if test -e ${devtype} ${devnum}:${bootpart} " \ -+ "${prefix}${script}; then " \ -+ "echo Found U-Boot script " \ -+ "${prefix}${script}; " \ -+ "run boot_a_script; " \ -+ "echo SCRIPT FAILED: continuing...; " \ -+ "fi; " \ -+ "done\0" \ -+ \ -+ "scan_dev_for_boot=" \ -+ "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \ -+ "for prefix in ${boot_prefixes}; do " \ -+ "run scan_dev_for_extlinux; " \ -+ "run scan_dev_for_scripts; " \ -+ "done\0" \ -+ \ -+ "scan_dev_for_boot_part=" \ -+ "part list ${devtype} ${devnum} -bootable devplist; " \ -+ "env exists devplist || setenv devplist 1; " \ -+ "for bootpart in ${devplist}; do " \ -+ "if fstype ${devtype} ${devnum}:${bootpart} " \ -+ "bootfstype; then " \ -+ "run scan_dev_for_boot; " \ -+ "fi; " \ -+ "done\0" \ -+ \ -+ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ -+ \ -+ "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ -+ "for target in ${boot_targets}; do " \ -+ "run bootcmd_${target}; " \ -+ "done\0" -+ -+#ifndef CONFIG_BOOTCOMMAND -+#define CONFIG_BOOTCOMMAND "run distro_bootcmd" -+#endif -+ -+#endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ -diff -Nur u-boot-2014.07.orig/include/configs/chiliboard.h u-boot-2014.07/include/configs/chiliboard.h ---- u-boot-2014.07.orig/include/configs/chiliboard.h 2016-02-25 00:53:19.766846991 -0300 -+++ u-boot-2014.07/include/configs/chiliboard.h 2016-02-25 00:57:01.436205462 -0300 -@@ -124,7 +124,6 @@ - * as that will normally be within the kernel lowmem and thus visible via - * bootm_size and we only run on platforms with 256MB or more of memory. - */ --#ifdef CONFIG_RAM128MB - #define DEFAULT_LINUX_BOOT_ENV \ - "loadaddr=0x82000000\0" \ - "kernel_addr_r=0x82000000\0" \ -@@ -133,16 +132,6 @@ - "rdaddr=0x84080000\0" \ - "ramdisk_addr_r=0x84080000\0" \ - "bootm_size=0x8000000\0" --#else --#define DEFAULT_LINUX_BOOT_ENV \ -- "loadaddr=0x82000000\0" \ -- "kernel_addr_r=0x82000000\0" \ -- "fdtaddr=0x88000000\0" \ -- "fdt_addr_r=0x88000000\0" \ -- "rdaddr=0x88080000\0" \ -- "ramdisk_addr_r=0x88080000\0" \ -- "bootm_size=0x10000000\0" --#endif - - /* - * Default to a quick boot delay. -@@ -258,6 +247,7 @@ - #define CONFIG_CMD_ASKENV - #define CONFIG_CMD_ECHO - #define CONFIG_CMD_BOOTZ -+#define CONFIG_SUPPORT_RAW_INITRD - - /* - * Common filesystems support. When we have removable storage we -@@ -398,6 +388,9 @@ - #define CONFIG_EFI_PARTITION - #define CONFIG_PARTITION_UUIDS - #define CONFIG_CMD_PART -+#define CONFIG_CMD_SETEXPR -+ -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" - - #ifdef CONFIG_NAND - #ifndef CONFIG_NAND512MB -@@ -437,12 +430,20 @@ - - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include <config_distro_bootcmd.h> -+ - #ifndef CONFIG_SPL_BUILD - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - DEFAULT_LINUX_BOOT_ENV \ - "boot_fdt=try\0" \ -- "bootpart=0:2\0" \ -+ "bootpart=0:1\0" \ - "bootdir=/boot\0" \ -+ "fdtdir=/boot/dtbs\0" \ - "bootfile=zImage\0" \ - "fdtfile=undefined\0" \ - "console=ttyO0,115200n8\0" \ -@@ -450,9 +451,6 @@ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ - "optargs=\0" \ -- "mmcdev=0\0" \ -- "mmcroot=/dev/mmcblk0p2 rw\0" \ -- "mmcrootfstype=ext4 rootwait\0" \ - "rootpath=/export/rootfs\0" \ - "nfsopts=nolock\0" \ - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ -@@ -461,8 +459,7 @@ - "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ -- "root=${mmcroot} " \ -- "rootfstype=${mmcrootfstype}\0" \ -+ "root=${root}\0" \ - "spiroot=/dev/mtdblock4 rw\0" \ - "spirootfstype=jffs2\0" \ - "spisrcaddr=0xe0000\0" \ -@@ -477,46 +474,48 @@ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ -- "bootenv=uEnv.txt\0" \ -- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -- "importbootenv=echo Importing environment from mmc ...; " \ -- "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ -- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -- "mmcloados=run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdtaddr}; " \ -- "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -- "fi; " \ -- "else " \ -- "bootz; " \ -- "fi;\0" \ -- "mmcboot=mmc dev ${mmcdev}; " \ -- "if mmc rescan; then " \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootenv; then " \ -- "echo Loaded environment from ${bootenv};" \ -- "run importbootenv;" \ -- "fi;" \ -- "if test -n $uenvcmd; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "if run loadimage; then " \ -- "run mmcloados;" \ -- "fi;" \ -- "fi;\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=for devtype in mmc; do " \ -+ "for devnum in 0 1; do " \ -+ "if ${devtype} dev ${devnum}; then " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "part uuid ${devtype} ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "setexpr devnum ${devnum} + 1;" \ -+ "fi;" \ -+ "done;" \ -+ "done;\0" \ - "spiboot=echo Booting from spi ...; " \ - "run spiargs; " \ - "sf probe ${spibusno}:0; " \ -@@ -541,9 +540,6 @@ - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run mmcboot;" \ -- "setenv mmcdev 1; " \ -- "setenv bootpart 1:2; " \ -- "run mmcboot;" \ - "run nandboot;" - - /* NS16550 Configuration */ |