diff options
Diffstat (limited to 'libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch')
-rw-r--r-- | libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch | 1685 |
1 files changed, 0 insertions, 1685 deletions
diff --git a/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch b/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch deleted file mode 100644 index cbe029a69..000000000 --- a/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch +++ /dev/null @@ -1,1685 +0,0 @@ -From 22efc5d711cf5a91a236b3a54f94cbcad0fc7b5e Mon Sep 17 00:00:00 2001 -From: Kevin Mihelich <kevin@archlinuxarm.org> -Date: Sat, 29 Aug 2015 08:56:32 -0600 -Subject: [PATCH 5/6] chiliboard support - ---- - board/grinn/chiliboard/Makefile | 13 + - board/grinn/chiliboard/board.c | 447 +++++++++++++++++++ - board/grinn/chiliboard/board.h | 20 + - board/grinn/chiliboard/mux.c | 99 +++++ - board/grinn/chiliboard/u-boot.lds | 131 ++++++ - boards.cfg | 5 + - drivers/mtd/nand/omap_gpmc.c | 6 +- - include/configs/chiliboard.h | 878 ++++++++++++++++++++++++++++++++++++++ - 8 files changed, 1597 insertions(+), 2 deletions(-) - create mode 100644 board/grinn/chiliboard/Makefile - create mode 100644 board/grinn/chiliboard/board.c - create mode 100644 board/grinn/chiliboard/board.h - create mode 100644 board/grinn/chiliboard/mux.c - create mode 100644 board/grinn/chiliboard/u-boot.lds - create mode 100644 include/configs/chiliboard.h - -diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile -new file mode 100644 -index 0000000..804ac37 ---- /dev/null -+++ b/board/grinn/chiliboard/Makefile -@@ -0,0 +1,13 @@ -+# -+# Makefile -+# -+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) -+obj-y := mux.o -+endif -+ -+obj-y += board.o -diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c -new file mode 100644 -index 0000000..ed8ab63 ---- /dev/null -+++ b/board/grinn/chiliboard/board.c -@@ -0,0 +1,447 @@ -+/* -+ * board.c -+ * -+ * Board functions for Grinn chiliboard, AM335X based boards -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include <common.h> -+#include <errno.h> -+#include <spl.h> -+#include <asm/arch/cpu.h> -+#include <asm/arch/hardware.h> -+#include <asm/arch/omap.h> -+#include <asm/arch/ddr_defs.h> -+#include <asm/arch/clock.h> -+#include <asm/arch/gpio.h> -+#include <asm/arch/mmc_host_def.h> -+#include <asm/arch/sys_proto.h> -+#include <asm/arch/mem.h> -+#include <asm/io.h> -+#include <asm/emif.h> -+#include <asm/gpio.h> -+#include <i2c.h> -+#include <miiphy.h> -+#include <cpsw.h> -+#include <power/tps65217.h> -+#include <power/tps65910.h> -+#include <environment.h> -+#include <watchdog.h> -+#include <environment.h> -+#include "board.h" -+ -+DECLARE_GLOBAL_DATA_PTR; -+#define HDR_NAME_LEN 8 -+ -+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; -+ -+#ifndef CONFIG_SKIP_LOWLEVEL_INIT -+static const struct ddr_data ddr2_chilisom_gcs1_data = { -+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | -+ (MT47H128M16RT25E_RD_DQS<<20) | -+ (MT47H128M16RT25E_RD_DQS<<10) | -+ (MT47H128M16RT25E_RD_DQS<<0)), -+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | -+ (MT47H128M16RT25E_WR_DQS<<20) | -+ (MT47H128M16RT25E_WR_DQS<<10) | -+ (MT47H128M16RT25E_WR_DQS<<0)), -+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | -+ (MT47H128M16RT25E_PHY_WRLVL<<20) | -+ (MT47H128M16RT25E_PHY_WRLVL<<10) | -+ (MT47H128M16RT25E_PHY_WRLVL<<0)), -+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | -+ (MT47H128M16RT25E_PHY_GATELVL<<20) | -+ (MT47H128M16RT25E_PHY_GATELVL<<10) | -+ (MT47H128M16RT25E_PHY_GATELVL<<0)), -+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | -+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) | -+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) | -+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)), -+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | -+ (MT47H128M16RT25E_PHY_WR_DATA<<20) | -+ (MT47H128M16RT25E_PHY_WR_DATA<<10) | -+ (MT47H128M16RT25E_PHY_WR_DATA<<0)), -+}; -+ -+static const struct cmd_control ddr2_chilisom_gcs1_cmd_ctrl_data = { -+ .cmd0csratio = MT47H128M16RT25E_RATIO, -+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, -+ -+ .cmd1csratio = MT47H128M16RT25E_RATIO, -+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, -+ -+ .cmd2csratio = MT47H128M16RT25E_RATIO, -+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, -+}; -+ -+static const struct emif_regs ddr2_chilisom_gcs1_emif_reg_data = { -+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, -+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, -+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, -+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, -+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, -+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, -+}; -+ -+static const struct ddr_data ddr3_chilisom_gcs2_data = { -+ .datardsratio0 = MT41K256M16HA125E_RD_DQS, -+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS, -+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, -+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, -+}; -+ -+static const struct cmd_control ddr3_chilisom_gcs2_cmd_ctrl_data = { -+ .cmd0csratio = MT41K256M16HA125E_RATIO, -+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -+ -+ .cmd1csratio = MT41K256M16HA125E_RATIO, -+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -+ -+ .cmd2csratio = MT41K256M16HA125E_RATIO, -+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -+}; -+ -+static struct emif_regs ddr3_chilisom_gcs2_emif_reg_data = { -+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, -+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, -+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, -+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, -+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, -+ .zq_config = MT41K256M16HA125E_ZQ_CFG, -+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, -+}; -+ -+#ifdef CONFIG_SPL_OS_BOOT -+int spl_start_uboot(void) -+{ -+ /* break into full u-boot on 'c' */ -+ if (serial_tstc() && serial_getc() == 'c') -+ return 1; -+ -+#ifdef CONFIG_SPL_ENV_SUPPORT -+ env_init(); -+ env_relocate_spec(); -+ if (getenv_yesno("boot_os") != 1) -+ return 1; -+#endif -+ -+ return 0; -+} -+#endif -+ -+#define OSC (V_OSCK/1000000) -+const struct dpll_params dpll_ddr_chilisom_gcs1 = { -+ 266, OSC-1, 1, -1, -1, -1, -1}; -+const struct dpll_params dpll_ddr_chilisom_gcs2 = { -+ 400, OSC-1, 1, -1, -1, -1, -1}; -+ -+void am33xx_spl_board_init(void) -+{ -+ int mpu_vdd; -+ -+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); -+ -+ int usb_cur_lim; -+ -+ if (i2c_probe(TPS65217_CHIP_PM)) -+ return; -+ -+ uchar pmic_status_reg; -+ if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg)) -+ return; -+ if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) { -+ puts("No AC power, disabling frequency switch\n"); -+ return; -+ } -+ -+ /* -+ * Increase USB current limit to 1300mA or 1800mA and set -+ * the MPU voltage controller as needed. -+ */ -+ if (dpll_mpu_opp100.m == MPUPLL_M_1000) { -+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; -+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; -+ } else { -+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; -+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; -+ } -+ -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, -+ TPS65217_POWER_PATH, -+ usb_cur_lim, -+ TPS65217_USB_INPUT_CUR_LIMIT_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ -+ /* Set DCDC3 (CORE) voltage to 1.125V */ -+ if (tps65217_voltage_update(TPS65217_DEFDCDC3, -+ TPS65217_DCDC_VOLT_SEL_1125MV)) { -+ puts("tps65217_voltage_update failure\n"); -+ return; -+ } -+ -+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); -+ if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { -+ puts("tps65217_voltage_update failure\n"); -+ return; -+ } -+ -+ /* Set LDO3, LDO4 output voltage to 3.3V for GCS1. -+ * Set LDO3 to 1.8V and LDO4 to 3.3V for GCS2. */ -+ -+ #ifdef CONFIG_CHILISOM_GCS2 -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS1, -+ TPS65217_LDO_VOLTAGE_OUT_1_8, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS2, -+ TPS65217_LDO_VOLTAGE_OUT_3_3, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ #else -+ -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS1, -+ TPS65217_LDO_VOLTAGE_OUT_3_3, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS2, -+ TPS65217_LDO_VOLTAGE_OUT_3_3, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ #endif -+ -+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); -+} -+ -+const struct dpll_params *get_dpll_ddr_params(void) -+{ -+ enable_i2c0_pin_mux(); -+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); -+ -+#ifndef CONFIG_CHILISOM_GCS2 -+ return &dpll_ddr_chilisom_gcs1; -+#else -+ return &dpll_ddr_chilisom_gcs2; -+#endif -+} -+ -+void set_uart_mux_conf(void) -+{ -+#ifdef CONFIG_SERIAL1 -+ enable_uart0_pin_mux(); -+#endif /* CONFIG_SERIAL1 */ -+} -+ -+void set_mux_conf_regs(void) -+{ -+ enable_board_pin_mux(); -+} -+ -+const struct ctrl_ioregs ioregs_chilisom_gcs1 = { -+ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+}; -+ -+const struct ctrl_ioregs ioregs_chilisom_gcs2 = { -+ .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+}; -+ -+void sdram_init(void) -+{ -+#ifndef CONFIG_CHILISOM_GCS2 -+ config_ddr(266, &ioregs_chilisom_gcs1, -+ &ddr2_chilisom_gcs1_data, -+ &ddr2_chilisom_gcs1_cmd_ctrl_data, -+ &ddr2_chilisom_gcs1_emif_reg_data, 0); -+#else -+ config_ddr(400, &ioregs_chilisom_gcs2, -+ &ddr3_chilisom_gcs2_data, -+ &ddr3_chilisom_gcs2_cmd_ctrl_data, -+ &ddr3_chilisom_gcs2_emif_reg_data, 0); -+#endif -+} -+#endif -+ -+/* -+ * Basic board specific setup. Pinmux has been handled already. -+ */ -+int board_init(void) -+{ -+#if defined(CONFIG_HW_WATCHDOG) -+ hw_watchdog_init(); -+#endif -+ -+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -+#if defined(CONFIG_NOR) || defined(CONFIG_NAND) -+ gpmc_init(); -+#endif -+ return 0; -+} -+ -+#ifdef CONFIG_BOARD_LATE_INIT -+int board_late_init(void) -+{ -+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG -+ char safe_string[HDR_NAME_LEN + 1]; -+ -+ /* Now set variables based on the header. */ -+ strncpy(safe_string, (char *)"CHILISOM", 8); -+ safe_string[8] = 0; -+ setenv("board_name", safe_string); -+ -+#ifndef CONFIG_CHILISOM_GCS2 -+ strncpy(safe_string, (char *)"1.1", 3); -+ safe_string[3] = 0; -+ setenv("board_rev", safe_string); -+#else -+ strncpy(safe_string, (char *)"2.2", 3); -+ safe_string[3] = 0; -+ setenv("board_rev", safe_string); -+#endif -+#endif -+ return 0; -+} -+#endif -+ -+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ -+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) -+static void cpsw_control(int enabled) -+{ -+ /* VTP can be added here */ -+ -+ return; -+} -+ -+static struct cpsw_slave_data cpsw_slaves[] = { -+ { -+ .slave_reg_ofs = 0x208, -+ .sliver_reg_ofs = 0xd80, -+ .phy_addr = 0, -+ }, -+ { -+ .slave_reg_ofs = 0x308, -+ .sliver_reg_ofs = 0xdc0, -+ .phy_addr = 1, -+ }, -+}; -+ -+static struct cpsw_platform_data cpsw_data = { -+ .mdio_base = CPSW_MDIO_BASE, -+ .cpsw_base = CPSW_BASE, -+ .mdio_div = 0xff, -+ .channels = 8, -+ .cpdma_reg_ofs = 0x800, -+ .slaves = 1, -+ .slave_data = cpsw_slaves, -+ .ale_reg_ofs = 0xd00, -+ .ale_entries = 1024, -+ .host_port_reg_ofs = 0x108, -+ .hw_stats_reg_ofs = 0x900, -+ .bd_ram_ofs = 0x2000, -+ .mac_control = (1 << 5), -+ .control = cpsw_control, -+ .host_port_num = 0, -+ .version = CPSW_CTRL_VERSION_2, -+}; -+#endif -+ -+/* -+ * This function will: -+ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr -+ * in the environment -+ * Perform fixups to the PHY present on certain boards. We only need this -+ * function in: -+ * - SPL with either CPSW or USB ethernet support -+ * - Full U-Boot, with either CPSW or USB ethernet -+ * Build in only these cases to avoid warnings about unused variables -+ * when we build an SPL that has neither option but full U-Boot will. -+ */ -+ -+#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \ -+ && defined(CONFIG_SPL_BUILD)) || \ -+ ((defined(CONFIG_DRIVER_TI_CPSW) || \ -+ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ -+ !defined(CONFIG_SPL_BUILD)) -+int board_eth_init(bd_t *bis) -+{ -+ int rv, n = 0; -+ uint8_t mac_addr[6]; -+ uint32_t mac_hi, mac_lo; -+ -+ /* try reading mac address from efuse */ -+ mac_lo = readl(&cdev->macid0l); -+ mac_hi = readl(&cdev->macid0h); -+ mac_addr[0] = mac_hi & 0xFF; -+ mac_addr[1] = (mac_hi & 0xFF00) >> 8; -+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16; -+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24; -+ mac_addr[4] = mac_lo & 0xFF; -+ mac_addr[5] = (mac_lo & 0xFF00) >> 8; -+ -+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ -+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) -+ if (!getenv("ethaddr")) { -+ printf("<ethaddr> not set. Validating first E-fuse MAC\n"); -+ -+ if (is_valid_ether_addr(mac_addr)) -+ eth_setenv_enetaddr("ethaddr", mac_addr); -+ } -+ -+#ifdef CONFIG_DRIVER_TI_CPSW -+ -+ mac_lo = readl(&cdev->macid1l); -+ mac_hi = readl(&cdev->macid1h); -+ mac_addr[0] = mac_hi & 0xFF; -+ mac_addr[1] = (mac_hi & 0xFF00) >> 8; -+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16; -+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24; -+ mac_addr[4] = mac_lo & 0xFF; -+ mac_addr[5] = (mac_lo & 0xFF00) >> 8; -+ -+ if (!getenv("eth1addr")) { -+ if (is_valid_ether_addr(mac_addr)) -+ eth_setenv_enetaddr("eth1addr", mac_addr); -+ } -+ -+ /* writel(MII_MODE_ENABLE, &cdev->miisel); */ -+ writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel); -+ -+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII; -+ -+ rv = cpsw_register(&cpsw_data); -+ if (rv < 0) -+ printf("Error %d registering CPSW switch\n", rv); -+ else -+ n += rv; -+#endif -+#endif -+#if defined(CONFIG_USB_ETHER) && \ -+ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) -+ if (is_valid_ether_addr(mac_addr)) -+ eth_setenv_enetaddr("usbnet_devaddr", mac_addr); -+ -+ rv = usb_eth_initialize(bis); -+ if (rv < 0) -+ printf("Error %d registering USB_ETHER\n", rv); -+ else -+ n += rv; -+#endif -+ return n; -+} -+#endif -diff --git a/board/grinn/chiliboard/board.h b/board/grinn/chiliboard/board.h -new file mode 100644 -index 0000000..6753e74 ---- /dev/null -+++ b/board/grinn/chiliboard/board.h -@@ -0,0 +1,20 @@ -+/* -+ * board.h -+ * -+ * Grinn AM335x boards information header -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _BOARD_H_ -+#define _BOARD_H_ -+ -+void enable_uart0_pin_mux(void); -+void enable_i2c0_pin_mux(void); -+void enable_board_pin_mux(void); -+#endif -diff --git a/board/grinn/chiliboard/mux.c b/board/grinn/chiliboard/mux.c -new file mode 100644 -index 0000000..644f211 ---- /dev/null -+++ b/board/grinn/chiliboard/mux.c -@@ -0,0 +1,99 @@ -+/* -+ * mux.c -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include <common.h> -+#include <asm/arch/sys_proto.h> -+#include <asm/arch/hardware.h> -+#include <asm/arch/mux.h> -+#include <asm/io.h> -+#include <i2c.h> -+#include "board.h" -+ -+static struct module_pin_mux uart0_pin_mux[] = { -+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ -+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ -+ {-1}, -+}; -+ -+static struct module_pin_mux mmc0_pin_mux[] = { -+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ -+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ -+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ -+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ -+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ -+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ -+ {-1}, -+}; -+ -+static struct module_pin_mux i2c0_pin_mux[] = { -+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | -+ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ -+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | -+ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ -+ {-1}, -+}; -+ -+static struct module_pin_mux rmii1_pin_mux[] = { -+ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ -+ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ -+ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ -+ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ -+ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ -+ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ -+ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ -+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ -+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ -+ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ -+ {-1}, -+}; -+ -+static struct module_pin_mux nand_pin_mux[] = { -+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ -+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ -+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ -+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ -+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ -+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ -+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ -+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ -+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ -+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ -+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ -+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ -+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ -+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ -+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ -+ {-1}, -+}; -+ -+void enable_uart0_pin_mux(void) -+{ -+ configure_module_pin_mux(uart0_pin_mux); -+} -+ -+void enable_i2c0_pin_mux(void) -+{ -+ configure_module_pin_mux(i2c0_pin_mux); -+} -+ -+void enable_board_pin_mux(void) -+{ -+ /* chiliboard pinmux */ -+ configure_module_pin_mux(rmii1_pin_mux); -+ configure_module_pin_mux(nand_pin_mux); -+ configure_module_pin_mux(mmc0_pin_mux); -+ -+#ifndef CONFIG_CHILISOM_GCS2 -+ puts("Configuration for Chilisom GCS1\n"); -+#else -+ puts("Configuration for Chilisom GCS2\n"); -+#endif -+} -diff --git a/board/grinn/chiliboard/u-boot.lds b/board/grinn/chiliboard/u-boot.lds -new file mode 100644 -index 0000000..bf70d88 ---- /dev/null -+++ b/board/grinn/chiliboard/u-boot.lds -@@ -0,0 +1,131 @@ -+/* -+ * Copyright (c) 2004-2008 Texas Instruments -+ * -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ *(.__image_copy_start) -+ *(.vectors) -+ CPUDIR/start.o (.text*) -+ board/grinn/chiliboard/built-in.o (.text*) -+ *(.text*) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } -+ -+ . = ALIGN(4); -+ .data : { -+ *(.data*) -+ } -+ -+ . = ALIGN(4); -+ -+ . = .; -+ -+ . = ALIGN(4); -+ .u_boot_list : { -+ KEEP(*(SORT(.u_boot_list*))); -+ } -+ -+ . = ALIGN(4); -+ -+ .image_copy_end : -+ { -+ *(.__image_copy_end) -+ } -+ -+ .rel_dyn_start : -+ { -+ *(.__rel_dyn_start) -+ } -+ -+ .rel.dyn : { -+ *(.rel*) -+ } -+ -+ .rel_dyn_end : -+ { -+ *(.__rel_dyn_end) -+ } -+ -+ .hash : { *(.hash*) } -+ -+ .end : -+ { -+ *(.__end) -+ } -+ -+ _image_binary_end = .; -+ -+ /* -+ * Deprecated: this MMU section is used by pxa at present but -+ * should not be used by new boards/CPUs. -+ */ -+ . = ALIGN(4096); -+ .mmutable : { -+ *(.mmutable) -+ } -+ -+/* -+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c -+ * __bss_base and __bss_limit are for linker only (overlay ordering) -+ */ -+ -+ .bss_start __rel_dyn_start (OVERLAY) : { -+ KEEP(*(.__bss_start)); -+ __bss_base = .; -+ } -+ -+ .bss __bss_base (OVERLAY) : { -+ *(.bss*) -+ . = ALIGN(4); -+ __bss_limit = .; -+ } -+ -+ .bss_end __bss_limit (OVERLAY) : { -+ KEEP(*(.__bss_end)); -+ } -+ -+ .dynsym _image_binary_end : { *(.dynsym) } -+ .dynbss : { *(.dynbss) } -+ .dynstr : { *(.dynstr*) } -+ .dynamic : { *(.dynamic*) } -+ .gnu.hash : { *(.gnu.hash) } -+ .plt : { *(.plt*) } -+ .interp : { *(.interp*) } -+ .gnu : { *(.gnu*) } -+ .ARM.exidx : { *(.ARM.exidx*) } -+} -diff --git a/boards.cfg b/boards.cfg -index 1ba2081..b432704 100644 ---- a/boards.cfg -+++ b/boards.cfg -@@ -258,6 +258,11 @@ Active arm armv7 am33xx BuR tseries - Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier <hannes.petermaier@br-automation.com> - Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier <hannes.petermaier@br-automation.com> - Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg <grinberg@compulab.co.il> -+Active arm armv7 am33xx grinn chiliboard chiliboard_ram128m chiliboard:CHILISOM_GCS2,NAND,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com> -+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m_ram128m chiliboard:CHILISOM_GCS2,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com> -+Active arm armv7 am33xx grinn chiliboard chiliboard_nand512m chiliboard:CHILISOM_GCS2,NAND,NAND512MB Grzegorz Glomb <g.glomb@grinn-global.com> -+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m chiliboard:CHILISOM_GCS2 Grzegorz Glomb <g.glomb@grinn-global.com> -+Active arm armv7 am33xx grinn chiliboard chiliboard chiliboard:CHILISOM_GCS2,NAND Grzegorz Glomb <g.glomb@grinn-global.com> - Active arm armv7 am33xx gumstix pepper pepper - Ash Charles <ash@gumstix.com> - Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com> - Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de> -diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c -index 1acf06b..0c9cde3 100644 ---- a/drivers/mtd/nand/omap_gpmc.c -+++ b/drivers/mtd/nand/omap_gpmc.c -@@ -478,11 +478,13 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, - oob += eccbytes) { - chip->ecc.hwctl(mtd, NAND_ECC_READ); - /* read data */ -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); -+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); */ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1); - chip->read_buf(mtd, p, eccsize); - - /* read respective ecc from oob area */ -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); -+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); */ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); - chip->read_buf(mtd, oob, eccbytes); - /* read syndrome */ - chip->ecc.calculate(mtd, p, &ecc_calc[i]); -diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h -new file mode 100644 -index 0000000..eacc9af ---- /dev/null -+++ b/include/configs/chiliboard.h -@@ -0,0 +1,878 @@ -+/* -+ * chiliboard.h -+ * -+ * Grinn chiliboard configuration header -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_CHILIBOARD_H -+#define __CONFIG_CHILIBOARD_H -+ -+#define CONFIG_AM33XX -+#define CONFIG_ARCH_CPU_INIT -+#define CONFIG_SYS_CACHELINE_SIZE 64 -+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ -+#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC -+ -+#include <asm/arch/omap.h> -+ -+/* NS16550 Configuration */ -+#define CONFIG_SYS_NS16550 -+#define CONFIG_SYS_NS16550_SERIAL -+#define CONFIG_SYS_NS16550_REG_SIZE (-4) -+#define CONFIG_SYS_NS16550_CLK 48000000 -+ -+/* Network defines. */ -+#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ -+#define CONFIG_CMD_DHCP -+#define CONFIG_CMD_MII -+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ -+#define CONFIG_BOOTP_DNS2 -+#define CONFIG_BOOTP_SEND_HOSTNAME -+#define CONFIG_BOOTP_GATEWAY -+#define CONFIG_BOOTP_SUBNETMASK -+#define CONFIG_NET_RETRY_COUNT 10 -+#define CONFIG_CMD_PING -+#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ -+#define CONFIG_MII /* Required in net/eth.c */ -+ -+/* -+ * RTC related defines. To use bootcount you must set bootlimit in the -+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT -+ * in the board config. -+ */ -+#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 -+ -+/* Enable the HW watchdog, since we can use this with bootcount */ -+#define CONFIG_HW_WATCHDOG -+#define CONFIG_OMAP_WATCHDOG -+ -+/* -+ * SPL related defines. The Public RAM memory map the ROM defines the -+ * area between 0x402F0400 and 0x4030B800 as a download area and -+ * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also -+ * supports X-MODEM loading via UART, and we leverage this and then use -+ * Y-MODEM to load u-boot.img, when booted over UART. -+ */ -+#define CONFIG_SPL_TEXT_BASE 0x402F0400 -+#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) -+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ -+ (128 << 20)) -+ -+/* Enable the watchdog inside of SPL */ -+#define CONFIG_SPL_WATCHDOG_SUPPORT -+ -+/* -+ * Since SPL did pll and ddr initialization for us, -+ * we don't need to do it twice. -+ */ -+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#endif -+ -+/* -+ * When building U-Boot such that there is no previous loader -+ * we need to call board_early_init_f. This is taken care of in -+ * s_init when we have SPL used. -+ */ -+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) -+#define CONFIG_BOARD_EARLY_INIT_F -+#endif -+ -+#ifdef CONFIG_NAND -+#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ -+#endif -+ -+/* Common define for many platforms. */ -+#define CONFIG_OMAP -+#define CONFIG_OMAP_COMMON -+#define CONFIG_SYS_GENERIC_BOARD -+ -+/* -+ * We typically do not contain NOR flash. In the cases where we do, we -+ * undefine this later. -+ */ -+#define CONFIG_SYS_NO_FLASH -+ -+/* Support both device trees and ATAGs. */ -+#define CONFIG_OF_LIBFDT -+#define CONFIG_CMDLINE_TAG -+#define CONFIG_SETUP_MEMORY_TAGS -+#define CONFIG_INITRD_TAG -+ -+/* -+ * Our DDR memory always starts at 0x80000000 and U-Boot shall have -+ * relocated itself to higher in memory by the time this value is used. -+ * However, set this to a 32MB offset to allow for easier Linux kernel -+ * booting as the default is often used as the kernel load address. -+ */ -+#define CONFIG_SYS_LOAD_ADDR 0x82000000 -+ -+/* -+ * We setup defaults based on constraints from the Linux kernel, which should -+ * also be safe elsewhere. We have the default load at 32MB into DDR (for -+ * the kernel), FDT above 128MB (the maximum location for the end of the -+ * kernel), and the ramdisk 512KB above that (allowing for hopefully never -+ * seen large trees). We say all of this must be within the first 256MB -+ * as that will normally be within the kernel lowmem and thus visible via -+ * bootm_size and we only run on platforms with 256MB or more of memory. -+ */ -+#ifdef CONFIG_RAM128MB -+#define DEFAULT_LINUX_BOOT_ENV \ -+ "loadaddr=0x82000000\0" \ -+ "kernel_addr_r=0x82000000\0" \ -+ "fdtaddr=0x84000000\0" \ -+ "fdt_addr_r=0x84000000\0" \ -+ "rdaddr=0x84080000\0" \ -+ "ramdisk_addr_r=0x84080000\0" \ -+ "bootm_size=0x8000000\0" -+#else -+#define DEFAULT_LINUX_BOOT_ENV \ -+ "loadaddr=0x82000000\0" \ -+ "kernel_addr_r=0x82000000\0" \ -+ "fdtaddr=0x88000000\0" \ -+ "fdt_addr_r=0x88000000\0" \ -+ "rdaddr=0x88080000\0" \ -+ "ramdisk_addr_r=0x88080000\0" \ -+ "bootm_size=0x10000000\0" -+#endif -+ -+/* -+ * Default to a quick boot delay. -+ */ -+#define CONFIG_BOOTDELAY 1 -+ -+/* -+ * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined, -+ * we say (for simplicity) that we have 1 bank, always, even when -+ * we have more. We always start at 0x80000000, and we place the -+ * initial stack pointer in our SRAM. Otherwise, we can define -+ * CONFIG_NR_DRAM_BANKS before including this file. -+ */ -+#ifndef CONFIG_NR_DRAM_BANKS -+#define CONFIG_NR_DRAM_BANKS 1 -+#endif -+#define CONFIG_SYS_SDRAM_BASE 0x80000000 -+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ -+ GENERATED_GBL_DATA_SIZE) -+ -+/* Timer information. */ -+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -+ -+/* I2C IP block */ -+#define CONFIG_I2C -+#define CONFIG_CMD_I2C -+#define CONFIG_SYS_I2C -+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -+#define CONFIG_SYS_I2C_OMAP24XX -+ -+/* MMC/SD IP block */ -+#define CONFIG_MMC -+#define CONFIG_GENERIC_MMC -+#define CONFIG_OMAP_HSMMC -+#define CONFIG_CMD_MMC -+ -+/* McSPI IP block */ -+#define CONFIG_SPI -+#define CONFIG_OMAP3_SPI -+#define CONFIG_CMD_SPI -+ -+/* GPIO block */ -+#define CONFIG_OMAP_GPIO -+#define CONFIG_CMD_GPIO -+ -+/* -+ * GPMC NAND block. We support 1 device and the physical address to -+ * access CS0 at is 0x8000000. -+ */ -+#ifdef CONFIG_NAND -+#define CONFIG_NAND_OMAP_GPMC -+#ifndef CONFIG_SYS_NAND_BASE -+#define CONFIG_SYS_NAND_BASE 0x8000000 -+#endif -+#define CONFIG_SYS_MAX_NAND_DEVICE 1 -+#define CONFIG_CMD_NAND -+#endif -+ -+/* -+ * The following are general good-enough settings for U-Boot. We set a -+ * large malloc pool as we generally have a lot of DDR, and we opt for -+ * function over binary size in the main portion of U-Boot as this is -+ * generally easily constrained later if needed. We enable the config -+ * options that give us information in the environment about what board -+ * we are on so we do not need to rely on the command prompt. We set a -+ * console baudrate of 115200 and use the default baud rate table. -+ */ -+#define CONFIG_SYS_MALLOC_LEN (16 << 20) -+#define CONFIG_SYS_HUSH_PARSER -+#define CONFIG_SYS_PROMPT "U-Boot# " -+#define CONFIG_SYS_CONSOLE_INFO_QUIET -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ -+#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ -+ -+/* As stated above, the following choices are optional. */ -+#define CONFIG_SYS_LONGHELP -+#define CONFIG_AUTO_COMPLETE -+#define CONFIG_CMDLINE_EDITING -+#define CONFIG_VERSION_VARIABLE -+ -+/* We set the max number of command args high to avoid HUSH bugs. */ -+#define CONFIG_SYS_MAXARGS 64 -+ -+/* Console I/O Buffer Size */ -+#define CONFIG_SYS_CBSIZE 512 -+/* Print Buffer Size */ -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ -+ + sizeof(CONFIG_SYS_PROMPT) + 16) -+/* Boot Argument Buffer Size */ -+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -+ -+/* -+ * When we have SPI, NOR or NAND flash we expect to be making use of -+ * mtdparts, both for ease of use in U-Boot and for passing information -+ * on to the Linux kernel. -+ */ -+#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) -+#define CONFIG_MTD_DEVICE /* Required for mtdparts */ -+#define CONFIG_CMD_MTDPARTS -+#endif -+ -+/* -+ * For commands to use, we take the default list and add a few other -+ * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH -+ * prior to this include, in order to skip a few commands. When we do -+ * have flash, if we expect these commands they must be enabled in that -+ * config. If desired, a specific list of desired commands can be used -+ * instead. -+ */ -+#include <config_cmd_default.h> -+#define CONFIG_CMD_ASKENV -+#define CONFIG_CMD_ECHO -+#define CONFIG_CMD_BOOTZ -+ -+/* -+ * Common filesystems support. When we have removable storage we -+ * enabled a number of useful commands and support. -+ */ -+#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) -+#define CONFIG_DOS_PARTITION -+#define CONFIG_CMD_FAT -+#define CONFIG_FAT_WRITE -+#define CONFIG_CMD_EXT2 -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC -+#endif -+ -+/* -+ * Our platforms make use of SPL to initalize the hardware (primarily -+ * memory) enough for full U-Boot to be loaded. We also support Falcon -+ * Mode so that the Linux kernel can be booted directly from SPL -+ * instead, if desired. We make use of the general SPL framework found -+ * under common/spl/. Given our generally common memory map, we set a -+ * number of related defaults and sizes here. -+ */ -+#if !defined(CONFIG_NOR_BOOT) && \ -+ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX)) -+#define CONFIG_SPL -+#define CONFIG_SPL_FRAMEWORK -+#define CONFIG_SPL_OS_BOOT -+ -+/* -+ * Place the image at the start of the ROM defined image space. -+ * We limit our size to the ROM-defined downloaded image area, and use the -+ * rest of the space for stack. We load U-Boot itself into memory at -+ * 0x80800000 for legacy reasons (to not conflict with older SPLs). We -+ * have our BSS be placed 1MiB after this, to allow for the default -+ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case. -+ * We have the SPL malloc pool at the end of the BSS area. -+ */ -+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -+#ifndef CONFIG_SYS_TEXT_BASE -+#define CONFIG_SYS_TEXT_BASE 0x80800000 -+#endif -+#ifndef CONFIG_SPL_BSS_START_ADDR -+#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 -+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -+#endif -+#ifndef CONFIG_SYS_SPL_MALLOC_START -+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ -+ CONFIG_SPL_BSS_MAX_SIZE) -+#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -+#endif -+ -+/* RAW SD card / eMMC locations. */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -+ -+/* FAT sd card locations. */ -+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -+ -+#ifdef CONFIG_SPL_OS_BOOT -+/* FAT */ -+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" -+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" -+ -+/* RAW SD card / eMMC */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ -+ -+/* NAND */ -+#ifdef CONFIG_NAND -+#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ -+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -+#endif -+ -+/* spl export command */ -+#define CONFIG_CMD_SPL -+#endif -+ -+#ifdef CONFIG_MMC -+#define CONFIG_SPL_LIBDISK_SUPPORT -+#define CONFIG_SPL_MMC_SUPPORT -+#define CONFIG_SPL_FAT_SUPPORT -+#endif -+ -+/* General parts of the framework, required. */ -+#define CONFIG_SPL_I2C_SUPPORT -+#define CONFIG_SPL_LIBCOMMON_SUPPORT -+#define CONFIG_SPL_LIBGENERIC_SUPPORT -+#define CONFIG_SPL_SERIAL_SUPPORT -+#define CONFIG_SPL_GPIO_SUPPORT -+#define CONFIG_SPL_BOARD_INIT -+ -+#ifdef CONFIG_NAND -+#define CONFIG_SPL_NAND_SUPPORT -+#define CONFIG_SPL_NAND_BASE -+#define CONFIG_SPL_NAND_DRIVERS -+#define CONFIG_SPL_NAND_ECC -+#define CONFIG_SPL_MTD_SUPPORT -+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -+/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ /* Defined later in this configuration */ -+#endif -+#endif /* !CONFIG_NOR_BOOT */ -+ -+#ifndef CONFIG_SPL_BUILD -+# define CONFIG_FIT -+# define CONFIG_TIMESTAMP -+# define CONFIG_LZO -+# ifdef CONFIG_ENABLE_VBOOT -+# define CONFIG_OF_CONTROL -+# define CONFIG_OF_SEPARATE -+# define CONFIG_DEFAULT_DEVICE_TREE am335x-chiliboard -+# define CONFIG_FIT_SIGNATURE -+# define CONFIG_RSA -+# endif -+#endif -+ -+#define CONFIG_SYS_BOOTM_LEN (16 << 20) -+ -+#define CONFIG_BOARD_LATE_INIT -+ -+#define CONFIG_SERIAL1 1 -+#define CONFIG_CONS_INDEX 1 -+ -+/* Clock Defines */ -+#define V_OSCK 24000000 /* Clock output from T2 */ -+#define V_SCLK (V_OSCK) -+ -+/* Custom script for NOR */ -+#define CONFIG_SYS_LDSCRIPT "board/grinn/chiliboard/u-boot.lds" -+ -+/* Always 128 KiB env size */ -+#define CONFIG_ENV_SIZE (128 << 10) -+ -+/* Enhance our eMMC support / experience. */ -+#define CONFIG_CMD_GPT -+#define CONFIG_EFI_PARTITION -+#define CONFIG_PARTITION_UUIDS -+#define CONFIG_CMD_PART -+ -+#ifdef CONFIG_NAND -+#ifndef CONFIG_NAND512MB -+#define NANDARGS \ -+ "mtdids=" MTDIDS_DEFAULT "\0" \ -+ "mtdparts=" MTDPARTS_DEFAULT "\0" \ -+ "nandargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${nandroot} " \ -+ "rootfstype=${nandrootfstype}\0" \ -+ "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \ -+ "nandrootfstype=ubifs rootwait=1\0" \ -+ "nandboot=echo Booting from nand ...; " \ -+ "run nandargs; " \ -+ "nand read ${fdtaddr} u-boot-spl-os; " \ -+ "nand read ${loadaddr} kernel; " \ -+ "bootz ${loadaddr} - ${fdtaddr}\0" -+#else -+#define NANDARGS \ -+ "mtdids=" MTDIDS_DEFAULT "\0" \ -+ "mtdparts=" MTDPARTS_DEFAULT "\0" \ -+ "nandargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${nandroot} " \ -+ "rootfstype=${nandrootfstype}\0" \ -+ "nandroot=ubi0:rootfs rw ubi.mtd=8,4096\0" \ -+ "nandrootfstype=ubifs rootwait=1\0" \ -+ "nandboot=echo Booting from nand ...; " \ -+ "run nandargs; " \ -+ "nand read ${fdtaddr} u-boot-spl-os; " \ -+ "nand read ${loadaddr} kernel; " \ -+ "bootz ${loadaddr} - ${fdtaddr}\0" -+#endif -+#else -+#define NANDARGS "" -+#endif -+ -+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG -+ -+#ifndef CONFIG_SPL_BUILD -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ DEFAULT_LINUX_BOOT_ENV \ -+ "boot_fdt=try\0" \ -+ "bootpart=0:2\0" \ -+ "bootdir=/boot\0" \ -+ "bootfile=zImage\0" \ -+ "fdtfile=undefined\0" \ -+ "console=ttyO0,115200n8\0" \ -+ "partitions=" \ -+ "uuid_disk=${uuid_gpt_disk};" \ -+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ -+ "optargs=\0" \ -+ "mmcdev=0\0" \ -+ "mmcroot=/dev/mmcblk0p2 rw\0" \ -+ "mmcrootfstype=ext4 rootwait\0" \ -+ "rootpath=/export/rootfs\0" \ -+ "nfsopts=nolock\0" \ -+ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ -+ "::off\0" \ -+ "ramroot=/dev/ram0 rw\0" \ -+ "ramrootfstype=ext2\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${mmcroot} " \ -+ "rootfstype=${mmcrootfstype}\0" \ -+ "spiroot=/dev/mtdblock4 rw\0" \ -+ "spirootfstype=jffs2\0" \ -+ "spisrcaddr=0xe0000\0" \ -+ "spiimgsize=0x362000\0" \ -+ "spibusno=0\0" \ -+ "spiargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${spiroot} " \ -+ "rootfstype=${spirootfstype}\0" \ -+ "netargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=/dev/nfs " \ -+ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ -+ "ip=dhcp\0" \ -+ "bootenv=uEnv.txt\0" \ -+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -+ "importbootenv=echo Importing environment from mmc ...; " \ -+ "env import -t $loadaddr $filesize\0" \ -+ "ramargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${ramroot} " \ -+ "rootfstype=${ramrootfstype}\0" \ -+ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -+ "mmcloados=run mmcargs; " \ -+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -+ "if run loadfdt; then " \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ -+ "else " \ -+ "if test ${boot_fdt} = try; then " \ -+ "bootz; " \ -+ "else " \ -+ "echo WARN: Cannot load the DT; " \ -+ "fi; " \ -+ "fi; " \ -+ "else " \ -+ "bootz; " \ -+ "fi;\0" \ -+ "mmcboot=mmc dev ${mmcdev}; " \ -+ "if mmc rescan; then " \ -+ "echo SD/MMC found on device ${mmcdev};" \ -+ "if run loadbootenv; then " \ -+ "echo Loaded environment from ${bootenv};" \ -+ "run importbootenv;" \ -+ "fi;" \ -+ "if test -n $uenvcmd; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "if run loadimage; then " \ -+ "run mmcloados;" \ -+ "fi;" \ -+ "fi;\0" \ -+ "spiboot=echo Booting from spi ...; " \ -+ "run spiargs; " \ -+ "sf probe ${spibusno}:0; " \ -+ "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ -+ "bootz ${loadaddr}\0" \ -+ "netboot=echo Booting from network ...; " \ -+ "setenv autoload no; " \ -+ "dhcp; " \ -+ "tftp ${loadaddr} ${bootfile}; " \ -+ "tftp ${fdtaddr} ${fdtfile}; " \ -+ "run netargs; " \ -+ "bootz ${loadaddr} - ${fdtaddr}\0" \ -+ "ramboot=echo Booting from ramdisk ...; " \ -+ "run ramargs; " \ -+ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ -+ "findfdt="\ -+ "setenv fdtfile am335x-chiliboard.dtb;\0" \ -+ NANDARGS \ -+ DFUARGS -+#endif -+ -+#define CONFIG_BOOTCOMMAND \ -+ "run findfdt; " \ -+ "run mmcboot;" \ -+ "setenv mmcdev 1; " \ -+ "setenv bootpart 1:2; " \ -+ "run mmcboot;" \ -+ "run nandboot;" -+ -+/* NS16550 Configuration */ -+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -+#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -+#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -+#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -+#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ -+#define CONFIG_BAUDRATE 115200 -+ -+/* -+#define CONFIG_CMD_EEPROM -+#define CONFIG_ENV_EEPROM_IS_ON_I2C -+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -+#define CONFIG_SYS_I2C_MULTI_EEPROMS -+*/ -+ -+/* PMIC support */ -+#define CONFIG_POWER_TPS65217 -+/* #define CONFIG_POWER_TPS65910 */ -+ -+/* SPL */ -+#ifndef CONFIG_NOR_BOOT -+#define CONFIG_SPL_POWER_SUPPORT -+#define CONFIG_SPL_YMODEM_SUPPORT -+ -+/* Bootcount using the RTC block */ -+#define CONFIG_BOOTCOUNT_LIMIT -+#define CONFIG_BOOTCOUNT_AM33XX -+ -+/* USB gadget RNDIS */ -+#define CONFIG_SPL_MUSB_NEW_SUPPORT -+ -+/* General network SPL, both CPSW and USB gadget RNDIS */ -+#define CONFIG_SPL_NET_SUPPORT -+#define CONFIG_SPL_ENV_SUPPORT -+#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -+ -+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" -+ -+#ifdef CONFIG_NAND -+#define CONFIG_NAND_OMAP_GPMC -+#define CONFIG_NAND_OMAP_ELM -+#define CONFIG_SYS_NAND_5_ADDR_CYCLE -+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ -+ CONFIG_SYS_NAND_PAGE_SIZE) -+ -+#ifndef CONFIG_NAND512MB -+#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -+#define CONFIG_SYS_NAND_OOBSIZE 64 -+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ -+ 10, 11, 12, 13, 14, 15, 16, 17, \ -+ 18, 19, 20, 21, 22, 23, 24, 25, \ -+ 26, 27, 28, 29, 30, 31, 32, 33, \ -+ 34, 35, 36, 37, 38, 39, 40, 41, \ -+ 42, 43, 44, 45, 46, 47, 48, 49, \ -+ 50, 51, 52, 53, 54, 55, 56, 57, } -+ -+#define CONFIG_SYS_NAND_ECCSIZE 512 -+#define CONFIG_SYS_NAND_ECCBYTES 14 -+#define CONFIG_SYS_NAND_ONFI_DETECTION -+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -+#else -+#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -+#define CONFIG_SYS_NAND_OOBSIZE 224 -+#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) -+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -+#define CONFIG_SYS_NAND_ECCPOS {\ -+ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ -+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ -+ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ -+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ -+ 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\ -+ 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\ -+ 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\ -+ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\ -+ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,\ -+ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119,\ -+ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129,\ -+ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139,\ -+ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149,\ -+ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,\ -+ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,\ -+ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179,\ -+ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189,\ -+ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199,\ -+ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} -+ -+#define CONFIG_SYS_NAND_ECCSIZE 512 -+#define CONFIG_SYS_NAND_ECCBYTES 26 -+#define CONFIG_SYS_NAND_ONFI_DETECTION -+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW -+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x100000 -+#endif -+ -+#endif -+#endif -+ -+/* -+ * For NOR boot, we must set this to the start of where NOR is mapped -+ * in memory. -+ */ -+#ifdef CONFIG_NOR_BOOT -+#define CONFIG_SYS_TEXT_BASE 0x08000000 -+#endif -+ -+/* -+ * USB configuration. We enable MUSB support, both for host and for -+ * gadget. We set USB0 as peripheral and USB1 as host, based on the -+ * board schematic and physical port wired to each. Then for host we -+ * add mass storage support and for gadget we add both RNDIS ethernet -+ * and DFU. -+ */ -+#define CONFIG_USB_MUSB_DSPS -+#define CONFIG_ARCH_MISC_INIT -+#define CONFIG_MUSB_GADGET -+#define CONFIG_MUSB_PIO_ONLY -+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT -+#define CONFIG_USB_GADGET -+#define CONFIG_USBDOWNLOAD_GADGET -+#define CONFIG_USB_GADGET_DUALSPEED -+#define CONFIG_USB_GADGET_VBUS_DRAW 2 -+#define CONFIG_MUSB_HOST -+#define CONFIG_AM335X_USB0 -+#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -+#define CONFIG_AM335X_USB1 -+#define CONFIG_AM335X_USB1_MODE MUSB_HOST -+ -+#ifdef CONFIG_MUSB_HOST -+#define CONFIG_CMD_USB -+#define CONFIG_USB_STORAGE -+#endif -+ -+#ifdef CONFIG_MUSB_GADGET -+#define CONFIG_USB_ETHER -+#define CONFIG_USB_ETH_RNDIS -+#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" -+ -+/* USB TI's IDs */ -+#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 -+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" -+#endif /* CONFIG_MUSB_GADGET */ -+ -+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) -+/* disable host part of MUSB in SPL */ -+#undef CONFIG_MUSB_HOST -+/* disable EFI partitions and partition UUID support */ -+#undef CONFIG_PARTITION_UUIDS -+#undef CONFIG_EFI_PARTITION -+/* -+ * Disable CPSW SPL support so we fit within the 101KiB limit. -+ */ -+#undef CONFIG_SPL_ETH_SUPPORT -+#endif -+ -+/* USB Device Firmware Update support */ -+#ifndef CONFIG_SPL_BUILD -+#define CONFIG_DFU_FUNCTION -+#define CONFIG_DFU_MMC -+#define CONFIG_CMD_DFU -+#define DFU_ALT_INFO_MMC \ -+ "dfu_alt_info_mmc=" \ -+ "boot part 0 1;" \ -+ "rootfs part 0 2;" \ -+ "MLO fat 0 1;" \ -+ "MLO.raw mmc 0x100 0x100;" \ -+ "u-boot.img.raw mmc 0x300 0x400;" \ -+ "spl-os-args.raw mmc 0x80 0x80;" \ -+ "spl-os-image.raw mmc 0x900 0x2000;" \ -+ "spl-os-args fat 0 1;" \ -+ "spl-os-image fat 0 1;" \ -+ "u-boot.img fat 0 1;" \ -+ "uEnv.txt fat 0 1\0" -+#ifdef CONFIG_NAND -+#define CONFIG_DFU_NAND -+#define DFU_ALT_INFO_NAND \ -+ "dfu_alt_info_nand=" \ -+ "SPL part 0 1;" \ -+ "SPL.backup1 part 0 2;" \ -+ "SPL.backup2 part 0 3;" \ -+ "SPL.backup3 part 0 4;" \ -+ "u-boot part 0 5;" \ -+ "u-boot-spl-os part 0 6;" \ -+ "kernel part 0 8;" \ -+ "rootfs part 0 9\0" -+#else -+#define DFU_ALT_INFO_NAND "" -+#endif -+#define CONFIG_DFU_RAM -+#define DFU_ALT_INFO_RAM \ -+ "dfu_alt_info_ram=" \ -+ "kernel ram 0x80200000 0xD80000;" \ -+ "fdt ram 0x80F80000 0x80000;" \ -+ "ramdisk ram 0x81000000 0x4000000\0" -+#define DFUARGS \ -+ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \ -+ DFU_ALT_INFO_MMC \ -+ DFU_ALT_INFO_RAM \ -+ DFU_ALT_INFO_NAND -+#endif -+ -+/* -+ * Default to using SPI for environment, etc. -+ * 0x000000 - 0x020000 : SPL (128KiB) -+ * 0x020000 - 0x0A0000 : U-Boot (512KiB) -+ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) -+ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) -+ * 0x0E0000 - 0x442000 : Linux Kernel -+ * 0x442000 - 0x800000 : Userland -+ */ -+#if defined(CONFIG_SPI_BOOT) -+/* SPL related */ -+#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ -+#define CONFIG_SPL_SPI_SUPPORT -+#define CONFIG_SPL_SPI_FLASH_SUPPORT -+#define CONFIG_SPL_SPI_LOAD -+#define CONFIG_SPL_SPI_BUS 0 -+#define CONFIG_SPL_SPI_CS 0 -+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -+ -+#define CONFIG_ENV_IS_IN_SPI_FLASH -+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -+#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ -+#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ -+#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ -+#define MTDIDS_DEFAULT "nor0=m25p80-flash.0" -+#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \ -+ "512k(u-boot),128k(u-boot-env1)," \ -+ "128k(u-boot-env2),3464k(kernel)," \ -+ "-(rootfs)" -+#elif defined(CONFIG_EMMC_BOOT) -+#undef CONFIG_ENV_IS_NOWHERE -+#define CONFIG_ENV_IS_IN_MMC -+#define CONFIG_SYS_MMC_ENV_DEV 1 -+#define CONFIG_SYS_MMC_ENV_PART 2 -+#define CONFIG_ENV_OFFSET 0x0 -+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -+#endif -+ -+/* SPI flash. */ -+#define CONFIG_CMD_SF -+#define CONFIG_SPI_FLASH -+#define CONFIG_SPI_FLASH_WINBOND -+#define CONFIG_SF_DEFAULT_SPEED 24000000 -+ -+/* Network. */ -+#define CONFIG_PHY_GIGE -+#define CONFIG_PHYLIB -+#define CONFIG_PHY_SMSC -+ -+/* NAND support */ -+#ifdef CONFIG_NAND -+#define CONFIG_CMD_NAND -+#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT) -+#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -+ -+#ifndef CONFIG_NAND512MB -+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ -+ "128k(SPL.backup1)," \ -+ "128k(SPL.backup2)," \ -+ "128k(SPL.backup3),1792k(u-boot)," \ -+ "128k(u-boot-spl-os)," \ -+ "128k(u-boot-env),5m(kernel),-(rootfs)" -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ -+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -+#else -+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:256k(SPL)," \ -+ "256k(SPL.backup1)," \ -+ "256k(SPL.backup2)," \ -+ "256k(SPL.backup3),2048k(u-boot)," \ -+ "256k(u-boot-spl-os)," \ -+ "256k(u-boot-env),5m(kernel),-(rootfs)" -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_OFFSET 0x340000 /* environment starts here */ -+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -+#endif -+ -+#endif -+#endif -+ -+/* -+ * NOR Size = 16 MiB -+ * Number of Sectors/Blocks = 128 -+ * Sector Size = 128 KiB -+ * Word length = 16 bits -+ * Default layout: -+ * 0x000000 - 0x07FFFF : U-Boot (512 KiB) -+ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) -+ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) -+ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) -+ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) -+ */ -+#if defined(CONFIG_NOR) -+#undef CONFIG_SYS_NO_FLASH -+#define CONFIG_CMD_FLASH -+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -+#define CONFIG_SYS_FLASH_PROTECTION -+#define CONFIG_SYS_FLASH_CFI -+#define CONFIG_FLASH_CFI_DRIVER -+#define CONFIG_FLASH_CFI_MTD -+#define CONFIG_SYS_MAX_FLASH_SECT 128 -+#define CONFIG_SYS_MAX_FLASH_BANKS 1 -+#define CONFIG_SYS_FLASH_BASE (0x08000000) -+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -+/* Reduce SPL size by removing unlikey targets */ -+#ifdef CONFIG_NOR_BOOT -+#define CONFIG_ENV_IS_IN_FLASH -+#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -+#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ -+#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ -+#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -+#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ -+ "512k(u-boot)," \ -+ "128k(u-boot-env1)," \ -+ "128k(u-boot-env2)," \ -+ "4m(kernel),-(rootfs)" -+#endif -+#endif /* NOR support */ -+ -+#endif /* ! __CONFIG_CHILISOM_H */ --- -2.5.0 - |