diff options
Diffstat (limited to 'libre/uboot-udoo-linux-libre')
5 files changed, 0 insertions, 595 deletions
diff --git a/libre/uboot-udoo-linux-libre/0001-parabola-arm-modifications.patch b/libre/uboot-udoo-linux-libre/0001-parabola-arm-modifications.patch deleted file mode 100644 index 88a2afa8c..000000000 --- a/libre/uboot-udoo-linux-libre/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,391 +0,0 @@ -diff --git a/board/udoo/1066mhz_4x256mx16_dl.cfg b/board/udoo/1066mhz_4x256mx16_dl.cfg -new file mode 100644 -index 0000000..e37c9f9 ---- /dev/null -+++ b/board/udoo/1066mhz_4x256mx16_dl.cfg -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D -+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 -+ -+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3 -+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63 -+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -+ -+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -+ -+ -+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -+ -+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -+ -+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -+ -+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -+ -+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -+ -+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251 -+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200 -+ -+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45 -+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744 -+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336 -+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630 -+ -+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038 -+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -+ -+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000 -+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D -+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -diff --git a/board/udoo/ddr-setup_dl.cfg b/board/udoo/ddr-setup_dl.cfg -new file mode 100644 -index 0000000..487570e ---- /dev/null -+++ b/board/udoo/ddr-setup_dl.cfg -@@ -0,0 +1,84 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Device Configuration Data (DCD) -+ * -+ * Each entry must have the format: -+ * Addr-type Address Value -+ * -+ * where: -+ * Addr-type register length (1,2 or 4 bytes) -+ * Address absolute address of the register -+ * value value to be stored in the register -+ */ -+ -+/* -+ * DDR3 settings -+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6DL ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 32 bits x16/x32 -+ */ -+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 -+ -+/* (differential input) */ -+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -+/* (differential input) */ -+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -+/* disable ddr pullups */ -+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 -+ -+/* Read data DQ Byte0-3 delay */ -+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 -diff --git a/board/udoo/udoo-dl.cfg b/board/udoo/udoo-dl.cfg -new file mode 100644 -index 0000000..46953c1 ---- /dev/null -+++ b/board/udoo/udoo-dl.cfg -@@ -0,0 +1,29 @@ -+/* -+ * Copyright (C) 2013 Boundary Devices -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Refer doc/README.imximage for more details about how-to configure -+ * and create imximage boot image -+ * -+ * The syntax is taken as close as possible with the kwbimage -+ */ -+ -+/* image version */ -+IMAGE_VERSION 2 -+ -+/* -+ * Boot Device : one of -+ * spi, sd (the board has no nand neither onenand) -+ */ -+BOOT_FROM sd -+ -+#define __ASSEMBLY__ -+#include <config.h> -+#include "asm/arch/mx6-ddr.h" -+#include "asm/arch/iomux.h" -+#include "asm/arch/crm_regs.h" -+ -+#include "ddr-setup_dl.cfg" -+#include "1066mhz_4x256mx16_dl.cfg" -+#include "clocks.cfg" -diff --git a/configs/udoo_dl_defconfig b/configs/udoo_dl_defconfig -new file mode 100644 -index 0000000..5dc9016 ---- /dev/null -+++ b/configs/udoo_dl_defconfig -@@ -0,0 +1,3 @@ -+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" -+CONFIG_ARM=y -+CONFIG_TARGET_UDOO=y -diff --git a/include/configs/udoo.h b/include/configs/udoo.h -index 700e9c1..7fdce0f 100644 ---- a/include/configs/udoo.h -+++ b/include/configs/udoo.h -@@ -78,7 +78,7 @@ - #define CONFIG_CMD_BMODE - #define CONFIG_CMD_SETEXPR - --#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTDELAY 1 - - #define CONFIG_SYS_MEMTEST_START 0x10000000 - #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) -@@ -96,60 +96,97 @@ - #define CONFIG_BOUNCE_BUFFER - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC - #define CONFIG_DOS_PARTITION - -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+ -+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) -+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb" -+#elif defined(CONFIG_MX6Q) - #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" -+#endif - - #define CONFIG_EXTRA_ENV_SETTINGS \ -- "script=boot.scr\0" \ -- "image=zImage\0" \ -- "console=ttymxc1\0" \ -+ "bootfile=vmlinuz-linux-libre\0" \ -+ "bootdir=/boot\0" \ -+ "console=ttymxc1,115200\0" \ - "splashpos=m,m\0" \ - "fdt_high=0xffffffff\0" \ -+ "rdaddr=0x12A00000\0" \ -+ "rdfile=initramfs-linux-libre.img\0" \ - "initrd_high=0xffffffff\0" \ -- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ -- "fdt_addr=0x18000000\0" \ -- "boot_fdt=try\0" \ -+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ -+ "fdtdir=/boot/dtbs/linux-libre\0" \ -+ "fdtaddr=0x18000000\0" \ - "ip_dyn=yes\0" \ -+ "optargs=\0" \ -+ "video=\0" \ - "mmcdev=0\0" \ -- "mmcpart=1\0" \ -- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ -- "update_sd_firmware_filename=u-boot.imx\0" \ -- "update_sd_firmware=" \ -- "if test ${ip_dyn} = yes; then " \ -- "setenv get_cmd dhcp; " \ -+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${mmcroot} " \ -+ "video=${video}\0" \ -+ "videoargs=" \ -+ "setenv nextcon 0; " \ -+ "if hdmidet; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ -+ "if=RGB24; " \ -+ "setenv fbmem fbmem=28M; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ -- "setenv get_cmd tftp; " \ -+ "echo - no HDMI monitor;" \ - "fi; " \ -- "if mmc dev ${mmcdev}; then " \ -- "if ${get_cmd} ${update_sd_firmware_filename}; then " \ -- "setexpr fw_sz ${filesize} / 0x200; " \ -- "setexpr fw_sz ${fw_sz} + 1; " \ -- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ -- "fi; " \ -- "fi\0" \ -- "mmcargs=setenv bootargs console=${console},${baudrate} " \ -- "root=${mmcroot}\0" \ -- "loadbootscript=" \ -- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ -- "bootscript=echo Running bootscript from mmc ...; " \ -- "source\0" \ -- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ -- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ -- "mmcboot=echo Booting from mmc ...; " \ -- "run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "i2c dev 1; " \ -+ "if i2c probe 0x10; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ -+ "if=RGB666; " \ -+ "if test 0 -eq ${nextcon}; then " \ -+ "setenv fbmem fbmem=10M; " \ - "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -+ "setenv fbmem ${fbmem},10M; " \ - "fi; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ -- "bootz; " \ -+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ -+ "fi; " \ -+ "setenv bootargs ${bootargs} ${fbmem}\0" \ -+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=mmc dev ${mmcdev}; " \ -+ "if mmc rescan; then " \ -+ "echo SD/MMC found on device ${mmcdev};" \ -+ "setenv bootpart ${mmcdev}:1; " \ -+ "echo Checking for: ${bootdir}/uboot-udoo-linux-libre/uEnv.txt ...;" \ -+ "if test -e mmc ${bootpart} ${bootdir}/uboot-udoo-linux-libre/uEnv.txt; then " \ -+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uboot-udoo-linux-libre/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uboot-udoo-linux-libre/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi; " \ -+ "if run loadimage; then " \ -+ "if run loadfdt; then " \ -+ "run mmcargs;" \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "else " \ -+ "echo Kernel found, but no device tree found;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ -@@ -161,10 +198,10 @@ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ -- "${get_cmd} ${image}; " \ -+ "${get_cmd} ${bootfile}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ -@@ -177,16 +214,7 @@ - "fi;\0" - - #define CONFIG_BOOTCOMMAND \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadimage; then " \ -- "run mmcboot; " \ -- "else run netboot; " \ -- "fi; " \ -- "fi; " \ -- "else run netboot; fi" -+ "run mmcboot;" - - /* Miscellaneous configurable options */ - #define CONFIG_SYS_LONGHELP -@@ -228,6 +256,7 @@ - - #define CONFIG_OF_LIBFDT - #define CONFIG_CMD_BOOTZ -+#define CONFIG_SUPPORT_RAW_INITRD - - #ifndef CONFIG_SYS_DCACHE_OFF - #define CONFIG_CMD_CACHE --- -2.2.1 - diff --git a/libre/uboot-udoo-linux-libre/0002-kernel-add-support-for-gcc-5.patch b/libre/uboot-udoo-linux-libre/0002-kernel-add-support-for-gcc-5.patch deleted file mode 100644 index 30718c561..000000000 --- a/libre/uboot-udoo-linux-libre/0002-kernel-add-support-for-gcc-5.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001 -From: Sasha Levin <sasha.levin@oracle.com> -Date: Mon, 13 Oct 2014 15:51:05 -0700 -Subject: [PATCH 2/6] kernel: add support for gcc 5 - -We're missing include/linux/compiler-gcc5.h which is required now -because gcc branched off to v5 in trunk. - -Just copy the relevant bits out of include/linux/compiler-gcc4.h, -no new code is added as of now. - -This fixes a build error when using gcc 5. - -Signed-off-by: Sasha Levin <sasha.levin@oracle.com> -Cc: <stable@vger.kernel.org> -Signed-off-by: Andrew Morton <akpm@linux-foundation.org> -Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> ---- - include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 66 insertions(+) - create mode 100644 include/linux/compiler-gcc5.h - -diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h -new file mode 100644 -index 0000000..cdd1cc2 ---- /dev/null -+++ b/include/linux/compiler-gcc5.h -@@ -0,0 +1,66 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __must_check __attribute__((warn_unused_result)) -+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) -+ -+/* Mark functions as cold. gcc will assume any path leading to a call -+ to them will be unlikely. This means a lot of manual unlikely()s -+ are unnecessary now for any paths leading to the usual suspects -+ like BUG(), printk(), panic() etc. [but let's keep them for now for -+ older compilers] -+ -+ Early snapshots of gcc 4.3 don't support this and we can't detect this -+ in the preprocessor, but we can live with this because they're unreleased. -+ Maketime probing would be overkill here. -+ -+ gcc also has a __attribute__((__hot__)) to move hot functions into -+ a special section, but I don't see any sense in this right now in -+ the kernel context */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+ -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__)) -+ -+/* -+ * Tell the optimizer that something else uses this function or variable. -+ */ -+#define __visible __attribute__((externally_visible)) -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * Fixed in GCC 4.8.2 and later versions. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ --- -2.4.4 - diff --git a/libre/uboot-udoo-linux-libre/PKGBUILD b/libre/uboot-udoo-linux-libre/PKGBUILD deleted file mode 100644 index 001d5bf99..000000000 --- a/libre/uboot-udoo-linux-libre/PKGBUILD +++ /dev/null @@ -1,61 +0,0 @@ -# U-Boot: UDOO -# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org> -# Contributor: André Silva <emulatorman@parabola.nu> - -buildarch=4 - -_pkgbase=linux-libre -pkgbase=uboot-udoo-${_pkgbase} -pkgname=("uboot-udoo-dual-${_pkgbase}" "uboot-udoo-quad-${_pkgbase}") -pkgver=2015.01 -pkgrel=1.1 -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -license=('GPL') -makedepends=('bc') -depends=('linux-libre') -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - '0002-kernel-add-support-for-gcc-5.patch') -md5sums=('7f08dc9e98a71652bd6968888ed6ec95' - '818143fb9e57d4aef9684365b0623901' - '721a46867e189d8dedc6b6f86a536a34') - -prepare() { - cd u-boot-${pkgver} - - patch -Np1 -i ../0001-parabola-arm-modifications.patch - patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch -} - -build() { - cd u-boot-${pkgver} - - unset CFLAGS CXXFLAGS LDFLAGS - - mkdir bins - for i in dl quad; do - make distclean - make udoo_${i}_config - make - mv u-boot.imx bins/u-boot-${i}.imx - done -} - -package_uboot-udoo-dual-linux-libre() { - pkgdesc="U-Boot for UDOO Dual (built for the linux-libre kernel package)" - replaces=('uboot-udoo-dual') - install=${pkgname}.install - - mkdir -p "${pkgdir}/boot/${pkgname}" - cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}/boot/${pkgname}"/u-boot.imx -} - -package_uboot-udoo-quad-linux-libre() { - pkgdesc="U-Boot for UDOO Quad (built for the linux-libre kernel package)" - replaces=('uboot-udoo-quad') - install=${pkgname}.install - - mkdir -p "${pkgdir}/boot/${pkgname}" - cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}/boot/${pkgname}"/u-boot.imx -} diff --git a/libre/uboot-udoo-linux-libre/uboot-udoo-dual-linux-libre.install b/libre/uboot-udoo-linux-libre/uboot-udoo-dual-linux-libre.install deleted file mode 100644 index 64a7695b0..000000000 --- a/libre/uboot-udoo-linux-libre/uboot-udoo-dual-linux-libre.install +++ /dev/null @@ -1,23 +0,0 @@ -flash_uboot() { - echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." - echo "Do you want to do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/uboot-udoo-dual-linux-libre/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2 - sync - else - echo "You can do this later by running:" - echo "# dd if=/boot/uboot-udoo-dual-linux-libre/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2" - fi -} - -## arg 1: the new package version -post_install() { - flash_uboot -} - -## arg 1: the new package version -## arg 2: the old package version -post_upgrade() { - flash_uboot -} diff --git a/libre/uboot-udoo-linux-libre/uboot-udoo-quad-linux-libre.install b/libre/uboot-udoo-linux-libre/uboot-udoo-quad-linux-libre.install deleted file mode 100644 index 60376bc46..000000000 --- a/libre/uboot-udoo-linux-libre/uboot-udoo-quad-linux-libre.install +++ /dev/null @@ -1,23 +0,0 @@ -flash_uboot() { - echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." - echo "Do you want to do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/uboot-udoo-quad-linux-libre/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2 - sync - else - echo "You can do this later by running:" - echo "# dd if=/boot/uboot-udoo-quad-linux-libre/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2" - fi -} - -## arg 1: the new package version -post_install() { - flash_uboot -} - -## arg 1: the new package version -## arg 2: the old package version -post_upgrade() { - flash_uboot -} |