summaryrefslogtreecommitdiff
path: root/libre/uboot-omap3_beagle
diff options
context:
space:
mode:
Diffstat (limited to 'libre/uboot-omap3_beagle')
-rw-r--r--libre/uboot-omap3_beagle/0001-parabola-arm-modifications.patch312
-rw-r--r--libre/uboot-omap3_beagle/PKGBUILD51
-rw-r--r--libre/uboot-omap3_beagle/extlinux.conf46
-rw-r--r--libre/uboot-omap3_beagle/uEnv.txt0
-rw-r--r--libre/uboot-omap3_beagle/uboot-omap3_beagle.install11
5 files changed, 0 insertions, 420 deletions
diff --git a/libre/uboot-omap3_beagle/0001-parabola-arm-modifications.patch b/libre/uboot-omap3_beagle/0001-parabola-arm-modifications.patch
deleted file mode 100644
index c99cd89b8..000000000
--- a/libre/uboot-omap3_beagle/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,312 +0,0 @@
-diff -Nur u-boot-2016.01.orig/board/ti/beagle/beagle.c u-boot-2016.01/board/ti/beagle/beagle.c
---- u-boot-2016.01.orig/board/ti/beagle/beagle.c 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/board/ti/beagle/beagle.c 2016-02-24 19:45:05.779336247 -0300
-@@ -56,6 +56,7 @@
- #define BBTOYS_WIFI 0x01000B00
- #define BBTOYS_VGA 0x02000B00
- #define BBTOYS_LCD 0x03000B00
-+#define BBTOYS_ULCD 0x04000B00
- #define BCT_BRETTL3 0x01000F00
- #define BCT_BRETTL4 0x02000F00
- #define LSR_COM6L_ADPT 0x01001300
-@@ -211,25 +212,25 @@
- * bus 1 for the availability of an AT24C01B serial EEPROM.
- * returns the device_vendor field from the EEPROM
- */
--static unsigned int get_expansion_id(void)
-+static unsigned int get_expansion_id(int eeprom_address)
- {
- i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
- /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-+ if (i2c_probe(eeprom_address) == 1) {
- i2c_set_bus_num(TWL4030_I2C_BUS);
- return BEAGLE_NO_EEPROM;
- }
-
- /* read configuration data */
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
- sizeof(expansion_config));
-
- /* retry reading configuration data with 16bit addressing */
- if ((expansion_config.device_vendor == 0xFFFFFF00) ||
- (expansion_config.device_vendor == 0xFFFFFFFF)) {
- printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
- sizeof(expansion_config));
- }
-
-@@ -341,15 +342,18 @@
- case REVISION_AXBX:
- printf("Beagle Rev Ax/Bx\n");
- setenv("beaglerev", "AxBx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- break;
- case REVISION_CX:
- printf("Beagle Rev C1/C2/C3\n");
- setenv("beaglerev", "Cx");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- break;
- case REVISION_C4:
- printf("Beagle Rev C4\n");
- setenv("beaglerev", "C4");
-+ setenv("musb", "musb_hdrc.fifo_mode=5");
- MUX_BEAGLE_C();
- /* Set VAUX2 to 1.8V for EHCI PHY */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -390,7 +394,7 @@
- generate_fake_mac = true;
- }
-
-- switch (get_expansion_id()) {
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
- case TINCANTOOLS_ZIPPY:
- printf("Recognized Tincantools Zippy board (rev %d %s)\n",
- expansion_config.revision,
-@@ -471,6 +475,30 @@
- }
-
- if (expansion_config.content == 1)
-+ setenv(expansion_config.env_var, expansion_config.env_setting);
-+
-+ /* Scan 0x51 as well for loop-thru boards */
-+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
-+ case BBTOYS_ULCD:
-+ printf("Recognized BeagleBoardToys uLCD-lite board\n");
-+ setenv("buddy2", "bbtoys-ulcd");
-+ setenv("defaultdisplay", "dvi");
-+ setenv("dvimode", "800x480MR-16@60");
-+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
-+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
-+ setenv("kmsmode", "video=DVI-D-1:800x480");
-+ break;
-+ case BEAGLE_NO_EEPROM:
-+ printf("No EEPROM on expansion board\n");
-+ setenv("buddy2", "none");
-+ break;
-+ default:
-+ printf("Unrecognized expansion board: %x\n",
-+ expansion_config.device_vendor);
-+ setenv("buddy2", "unknown");
-+ }
-+
-+ if (expansion_config.content == 1)
- setenv(expansion_config.env_var, expansion_config.env_setting);
-
- twl4030_power_init();
-diff -Nur u-boot-2016.01.orig/include/configs/omap3_beagle.h u-boot-2016.01/include/configs/omap3_beagle.h
---- u-boot-2016.01.orig/include/configs/omap3_beagle.h 2016-01-12 11:06:54.000000000 -0300
-+++ u-boot-2016.01/include/configs/omap3_beagle.h 2016-02-24 19:50:25.959802093 -0300
-@@ -91,6 +91,12 @@
- #define CONFIG_USB_ETHER_MCS7830
- #define CONFIG_USB_ETHER_SMSC95XX
-
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /* GPIO banks */
- #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
- #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-@@ -124,51 +130,71 @@
- #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
- /* devices */
-
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
-+
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "rdaddr=0x81000000\0" \
-+ BOOTENV \
-+ "loadaddr=0x82000000\0" \
-+ "rdaddr=0x88080000\0" \
- "fdt_high=0xffffffff\0" \
-- "fdtaddr=0x80f80000\0" \
-- "usbtty=cdc_acm\0" \
-- "bootfile=uImage\0" \
-- "ramdisk=ramdisk.gz\0" \
-- "bootdir=/boot\0" \
-- "bootpart=0:2\0" \
-+ "fdtaddr=0x88000000\0" \
- "console=ttyO2,115200n8\0" \
-- "mpurate=auto\0" \
-- "buddy=none\0" \
-- "optargs=\0" \
-- "camera=none\0" \
-- "vram=12M\0" \
-- "dvimode=640x480MR-16@60\0" \
-- "defaultdisplay=dvi\0" \
-+ "fdtfile=undefined\0" \
-+ "bootpart=0:1\0" \
-+ "bootdir=\0" \
-+ "fdtdir=/dtbs\0" \
-+ "bootfile=zImage\0" \
-+ "rdfile=initramfs-linux.img\0" \
- "mmcdev=0\0" \
-- "mmcroot=/dev/mmcblk0p2 rw\0" \
-- "mmcrootfstype=ext3 rootwait\0" \
-- "nandroot=ubi0:rootfs ubi.mtd=4\0" \
-- "nandrootfstype=ubifs\0" \
-- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-- "ramrootfstype=ext2\0" \
-+ "optargs=\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${mmcroot} " \
-- "rootfstype=${mmcrootfstype}\0" \
-- "nandargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "camera=${camera} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${nandroot} " \
-- "rootfstype=${nandrootfstype}\0" \
-+ "root=${root} " \
-+ "${musb} " \
-+ "${cmdline}\0" \
-+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+ "mmcboot=usb start;" \
-+ "for devtype in mmc usb; do " \
-+ "setenv devnum 0;" \
-+ "while ${devtype} dev ${devnum}; do " \
-+ "echo ${devtype} found on device ${devnum};" \
-+ "setenv bootpart ${devnum}:1;" \
-+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
-+ "part uuid ${devtype} ${rootpart} uuid;" \
-+ "setenv root PARTUUID=${uuid} rw rootwait;" \
-+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
-+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+ "env import -t ${loadaddr} ${filesize};" \
-+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+ "echo Checking if uenvcmd is set ...;" \
-+ "if test -n ${uenvcmd}; then " \
-+ "echo Running uenvcmd ...;" \
-+ "run uenvcmd;" \
-+ "fi;" \
-+ "fi;" \
-+ "run scan_dev_for_boot;" \
-+ "if run loadimage; then " \
-+ "run mmcargs;" \
-+ "if run loadfdt; then " \
-+ "if run loadrd; then " \
-+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+ "else " \
-+ "bootz ${loadaddr} - ${fdtaddr};" \
-+ "fi;" \
-+ "fi;" \
-+ "else " \
-+ "echo No kernel found;" \
-+ "fi;" \
-+ "setexpr devnum ${devnum} + 1;" \
-+ "done;" \
-+ "done;\0" \
- "findfdt=" \
- "if test $beaglerev = AxBx; then " \
- "setenv fdtfile omap3-beagle.dtb; fi; " \
-@@ -181,81 +207,11 @@
- "if test $beaglerev = xMC; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
-- "echo WARNING: Could not determine device tree to use; fi; \0" \
-- "validatefdt=" \
-- "if test $beaglerev = xMAB; then " \
-- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-- "setenv fdtfile omap3-beagle-xm.dtb; " \
-- "fi; " \
-- "fi; \0" \
-- "bootenv=uEnv.txt\0" \
-- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-- "importbootenv=echo Importing environment from mmc ...; " \
-- "env import -t -r $loadaddr $filesize\0" \
-- "ramargs=setenv bootargs console=${console} " \
-- "${optargs} " \
-- "mpurate=${mpurate} " \
-- "buddy=${buddy} "\
-- "vram=${vram} " \
-- "omapfb.mode=dvi:${dvimode} " \
-- "omapdss.def_disp=${defaultdisplay} " \
-- "root=${ramroot} " \
-- "rootfstype=${ramrootfstype}\0" \
-- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-- "source ${loadaddr}\0" \
-- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-- "mmcboot=echo Booting from mmc ...; " \
-- "run mmcargs; " \
-- "bootm ${loadaddr}\0" \
-- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
-- "run mmcargs; " \
-- "bootz ${loadaddr} - ${fdtaddr}\0" \
-- "nandboot=echo Booting from nand ...; " \
-- "run nandargs; " \
-- "nand read ${loadaddr} 280000 400000; " \
-- "bootm ${loadaddr}\0" \
-- "ramboot=echo Booting from ramdisk ...; " \
-- "run ramargs; " \
-- "bootm ${loadaddr}\0" \
-- "userbutton=if gpio input 173; then run userbutton_xm; " \
-- "else run userbutton_nonxm; fi;\0" \
-- "userbutton_xm=gpio input 4;\0" \
-- "userbutton_nonxm=gpio input 7;\0"
--/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
-+ "echo WARNING: Could not determine device tree to use; fi; \0"
-+
- #define CONFIG_BOOTCOMMAND \
- "run findfdt; " \
-- "mmc dev ${mmcdev}; if mmc rescan; then " \
-- "if run userbutton; then " \
-- "setenv bootenv uEnv.txt;" \
-- "else " \
-- "setenv bootenv user.txt;" \
-- "fi;" \
-- "echo SD/MMC found on device ${mmcdev};" \
-- "if run loadbootenv; then " \
-- "echo Loaded environment from ${bootenv};" \
-- "run importbootenv;" \
-- "fi;" \
-- "if test -n $uenvcmd; then " \
-- "echo Running uenvcmd ...;" \
-- "run uenvcmd;" \
-- "fi;" \
-- "if run loadbootscript; then " \
-- "run bootscript; " \
-- "else " \
-- "if run loadimage; then " \
-- "run mmcboot;" \
-- "fi;" \
-- "fi; " \
-- "fi;" \
-- "run nandboot;" \
-- "setenv bootfile zImage;" \
-- "if run loadimage; then " \
-- "run loadfdt;" \
-- "run mmcbootz; " \
-- "fi; " \
-+ "run mmcboot"
-
- /*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
diff --git a/libre/uboot-omap3_beagle/PKGBUILD b/libre/uboot-omap3_beagle/PKGBUILD
deleted file mode 100644
index 2b41eb15a..000000000
--- a/libre/uboot-omap3_beagle/PKGBUILD
+++ /dev/null
@@ -1,51 +0,0 @@
-# U-Boot: BeagleBoard and BeagleBoard-xM
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgname=uboot-omap3_beagle
-pkgver=2016.01
-pkgrel=2
-pkgdesc="U-Boot for BeagleBoard and BeagleBoard-xM"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-replaces=('uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts'
- 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck'
- 'uboot-beagleboard')
-conflicts=('uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts'
- 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck'
- 'uboot-beagleboard' 'uboot4grub-omap3_beagle')
-makedepends=('bc')
-backup=(boot/extlinux/extlinux.conf)
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
- '0001-parabola-arm-modifications.patch'
- 'extlinux.conf'
- 'uEnv.txt')
-md5sums=('7d4f65fd43d4d706f5c5650e020d899d'
- 'da3d52f785bce02602f88fb85f74de2f'
- '5172c86fd491728aad8109ebb8a997f8'
- 'd41d8cd98f00b204e9800998ecf8427e')
-
-prepare() {
- cd u-boot-${pkgver}
- patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
- cd u-boot-${pkgver}
-
- unset LDFLAGS CFLAGS CXXFLAGS
-
- make distclean
- make omap3_beagle_config
- make
-}
-
-package() {
- cd u-boot-${pkgver}
- mkdir -p "${pkgdir}"/boot/extlinux
- cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
- cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre/uboot-omap3_beagle/extlinux.conf b/libre/uboot-omap3_beagle/extlinux.conf
deleted file mode 100644
index 708bfcddb..000000000
--- a/libre/uboot-omap3_beagle/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
- kernel /vmlinuz-linux-libre
- append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
- fdtdir /dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-# kernel /vmlinuz-linux-libre-lts
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-# kernel /vmlinuz-linux-libre-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-# kernel /vmlinuz-linux-libre-lts-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-# kernel /vmlinuz-linux-libre-grsec
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-# kernel /vmlinuz-linux-libre-grsec-knock
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-# kernel /vmlinuz-linux-libre-audit
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-# kernel /vmlinuz-linux-libre-pck
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-# kernel /vmlinuz-linux-libre-rt
-# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8
-# fdtdir /dtbs/linux-libre-rt
diff --git a/libre/uboot-omap3_beagle/uEnv.txt b/libre/uboot-omap3_beagle/uEnv.txt
deleted file mode 100644
index e69de29bb..000000000
--- a/libre/uboot-omap3_beagle/uEnv.txt
+++ /dev/null
diff --git a/libre/uboot-omap3_beagle/uboot-omap3_beagle.install b/libre/uboot-omap3_beagle/uboot-omap3_beagle.install
deleted file mode 100644
index 8aff26699..000000000
--- a/libre/uboot-omap3_beagle/uboot-omap3_beagle.install
+++ /dev/null
@@ -1,11 +0,0 @@
-extlinux_warning() {
- echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-post_install() {
- extlinux_warning
-}
-
-post_upgrade() {
- extlinux_warning
-}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 13:57:38 +0000