diff options
Diffstat (limited to 'libre/uboot-beaglebone-linux-libre-grsec/0001-parabola-arm-modifications.patch')
| -rw-r--r-- | libre/uboot-beaglebone-linux-libre-grsec/0001-parabola-arm-modifications.patch | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/libre/uboot-beaglebone-linux-libre-grsec/0001-parabola-arm-modifications.patch b/libre/uboot-beaglebone-linux-libre-grsec/0001-parabola-arm-modifications.patch deleted file mode 100644 index ca64e8631..000000000 --- a/libre/uboot-beaglebone-linux-libre-grsec/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,238 +0,0 @@ -diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig -index 968d041..3406926 100644 ---- a/configs/am335x_evm_defconfig -+++ b/configs/am335x_evm_defconfig -@@ -1,7 +1,6 @@ - CONFIG_SPL=y - CONFIG_SPL_STACK_R=y - CONFIG_SPL_STACK_R_ADDR=0x82000000 --CONFIG_SYS_EXTRA_OPTIONS="NAND" --CONFIG_CONS_INDEX=1 -+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" - CONFIG_ARM=y - CONFIG_TARGET_AM335X_EVM=y -diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h -index a87059c..e68e848 100644 ---- a/include/configs/am335x_evm.h -+++ b/include/configs/am335x_evm.h -@@ -17,6 +17,7 @@ - #define __CONFIG_AM335X_EVM_H - - #include <configs/ti_am335x_common.h> -+#define CONFIG_ENV_IS_NOWHERE - - #ifndef CONFIG_SPL_BUILD - #ifndef CONFIG_FIT -@@ -45,6 +46,9 @@ - /* Enhance our eMMC support / experience. */ - #define CONFIG_CMD_GPT - #define CONFIG_EFI_PARTITION -+#define CONFIG_CMD_PART -+#define CONFIG_PARTITION_UUIDS -+#define CONFIG_CMD_SETEXPR - - #ifdef CONFIG_NAND - #define NANDARGS \ -@@ -70,110 +74,79 @@ - #ifndef CONFIG_SPL_BUILD - #define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ -- "boot_fdt=try\0" \ -- "bootpart=0:2\0" \ -+ "bootpart=0:1\0" \ - "bootdir=/boot\0" \ -- "bootfile=zImage\0" \ -+ "fdtdir=/boot/dtbs/linux-libre-grsec\0" \ -+ "bootfile=vmlinuz-linux-libre-grsec\0" \ - "fdtfile=undefined\0" \ -+ "rdfile=initramfs-linux-libre-grsec.img\0" \ - "console=ttyO0,115200n8\0" \ - "partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ - "optargs=\0" \ -- "mmcdev=0\0" \ -- "mmcroot=/dev/mmcblk0p2 ro\0" \ -- "mmcrootfstype=ext4 rootwait\0" \ -- "rootpath=/export/rootfs\0" \ -- "nfsopts=nolock\0" \ -- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ -- "::off\0" \ -- "ramroot=/dev/ram0 rw\0" \ -- "ramrootfstype=ext2\0" \ -+ "cape_disable=\0" \ -+ "cape_enable=\0" \ -+ "cmdline=\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ -- "root=${mmcroot} " \ -- "rootfstype=${mmcrootfstype}\0" \ -- "spiroot=/dev/mtdblock4 rw\0" \ -- "spirootfstype=jffs2\0" \ -- "spisrcaddr=0xe0000\0" \ -- "spiimgsize=0x362000\0" \ -- "spibusno=0\0" \ -- "spiargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "root=${spiroot} " \ -- "rootfstype=${spirootfstype}\0" \ -- "netargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "root=/dev/nfs " \ -- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ -- "ip=dhcp\0" \ -- "bootenv=uEnv.txt\0" \ -- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ -- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ -- "source ${loadaddr}\0" \ -- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -- "importbootenv=echo Importing environment from mmc ...; " \ -- "env import -t -r $loadaddr $filesize\0" \ -- "ramargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "root=${ramroot} " \ -- "rootfstype=${ramrootfstype}\0" \ -- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -- "mmcloados=run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdtaddr}; " \ -- "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -- "fi; " \ -- "else " \ -- "bootz; " \ -- "fi;\0" \ -- "mmcboot=mmc dev ${mmcdev}; " \ -- "if mmc rescan; then " \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootscript; then " \ -- "run bootscript;" \ -- "else " \ -- "if run loadbootenv; then " \ -- "echo Loaded environment from ${bootenv};" \ -- "run importbootenv;" \ -+ "${cape_disable} " \ -+ "${cape_enable} " \ -+ "root=${root} " \ -+ "${cmdline}\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=usb start;" \ -+ "for devtype in mmc usb; do " \ -+ "for devnum in 0 1; do " \ -+ "if ${devtype} dev ${devnum}; then " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "part uuid ${devtype} ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \ -+ "echo Checking for: ${bootdir}/uboot-beaglebone-linux-libre-grsec/uEnv.txt ...;" \ -+ "gpio set 54;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uboot-beaglebone-linux-libre-grsec/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uboot-beaglebone-linux-libre-grsec/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uboot-beaglebone-linux-libre-grsec/uEnv.txt;" \ -+ "if test -n ${cape}; then " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \ -+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \ -+ "fi; " \ -+ "echo using: $fdtfile...; " \ -+ "fi; " \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "gpio set 55;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "gpio set 56;" \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "gpio clear 54; gpio clear 55;" \ -+ "setexpr devnum ${devnum} + 1;" \ - "fi;" \ -- "if test -n $uenvcmd; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "if run loadimage; then " \ -- "run mmcloados;" \ -- "fi;" \ -- "fi ;" \ -- "fi;\0" \ -- "spiboot=echo Booting from spi ...; " \ -- "run spiargs; " \ -- "sf probe ${spibusno}:0; " \ -- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ -- "bootz ${loadaddr}\0" \ -- "netboot=echo Booting from network ...; " \ -- "setenv autoload no; " \ -- "dhcp; " \ -- "tftp ${loadaddr} ${bootfile}; " \ -- "tftp ${fdtaddr} ${fdtfile}; " \ -- "run netargs; " \ -- "bootz ${loadaddr} - ${fdtaddr}\0" \ -- "ramboot=echo Booting from ramdisk ...; " \ -- "run ramargs; " \ -- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ -+ "done;" \ -+ "done;\0" \ - "findfdt="\ - "if test $board_name = A335BONE; then " \ -- "setenv fdtfile am335x-bone.dtb; fi; " \ -+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \ - "if test $board_name = A335BNLT; then " \ -- "setenv fdtfile am335x-boneblack.dtb; fi; " \ -+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \ - "if test $board_name = A33515BB; then " \ - "setenv fdtfile am335x-evm.dtb; fi; " \ - "if test $board_name = A335X_SK; then " \ -@@ -185,12 +158,11 @@ - #endif - - #define CONFIG_BOOTCOMMAND \ -- "run findfdt; " \ -- "run mmcboot;" \ -- "setenv mmcdev 1; " \ -- "setenv bootpart 1:2; " \ -+ "gpio set 53;" \ -+ "run findfdt;" \ - "run mmcboot;" \ -- "run nandboot;" -+ "gpio clear 54; gpio clear 55;" \ -+ "gpio set 56" - - /* NS16550 Configuration */ - #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -@@ -329,9 +301,8 @@ - #endif - - #ifdef CONFIG_MUSB_GADGET --#define CONFIG_USB_ETHER --#define CONFIG_USB_ETH_RNDIS --#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" -+#define CONFIG_CMD_USB_MASS_STORAGE -+#define CONFIG_USB_GADGET_MASS_STORAGE - - /* USB TI's IDs */ - #define CONFIG_G_DNL_VENDOR_NUM 0x0451 --- -2.4.2 - |