diff options
Diffstat (limited to 'libre/pacman')
| -rw-r--r-- | libre/pacman/pacman.conf.armv7h | 80 | ||||
| -rw-r--r-- | libre/pacman/pacman.conf.i686 | 80 | ||||
| -rw-r--r-- | libre/pacman/pacman.conf.x86_64 | 92 |
3 files changed, 208 insertions, 44 deletions
diff --git a/libre/pacman/pacman.conf.armv7h b/libre/pacman/pacman.conf.armv7h index 85d24e3e5..7e07d64e2 100644 --- a/libre/pacman/pacman.conf.armv7h +++ b/libre/pacman/pacman.conf.armv7h @@ -61,16 +61,57 @@ LocalFileSigLevel = Optional # Include = IncludePath # # The header [repo-name] is crucial - it must be present and -# uncommented to enable the repo. +# un-commented to enable the repo. # +# An example of a custom package repository is given below +# in the "User-defined repos" section +# +# Some repositories are disabled by default. To enable them, un-comment the +# repo name header (e.g. '[nonprism]') and the following 'Include' line. +# You can add preferred servers for each repo between the header and "Include" line, +# according to the format in /etc/pacman.d/mirrorlist, +# and those will be preferred over the standard mirrors for that repo. +# +# The order in which these entries appear in this file is critical. +# Much of the Parabola magic that supports advanced features such as +# multiple init-systems and multiple layers of freedom and privacy, +# depends on the order in which these repos are defined. +# Moving or adding repos out of the expected order can make your system insane. -# The testing repositories are disabled by default. To enable, uncomment the -# repo name header and Include lines. You can add preferred servers immediately -# after the header, and they will be used before the default mirrors. +# Notes on special repositories: +# +# Non-prism is a repository for enhanced privacy, beyond the FSDG requirements. +# It contains specially patched versions of certain software from the standard repos, +# that are known to include privacy-sensative features that some people may want to use, +# but that others may consider to be undesirable anti-features. +# For more info see: https://wiki.parabola.nu/Nonprism +# +# The non-systemd repository contains packages that are important and relevant only to +# Parabola systems using an init-system other than systemd. +# Parabola systems using systemd SHOULD NOT have this enabled;. +# while Parabola systems using any other init-system SHOULD have this enabled. +# +# The kernels repository contains additional special kernels for particular use-cases, +# such as maximal security hardening and real-time systems. +# +# The PCR (Parabola Community Repository) contains additional packages, +# most often requested by Parabola users, that are not considered to be +# part of the standard Parabola/Arch system, but are nonetheless useful or fun. +# +# Multi-lib repositories allow 32-bit applications to run on x86_64 systems. +# +# The Parabola system also supports custom, user-defined, repositories; +# but be aware that the Parabola team can not recommend nor support their use. +# The Parabola team can only support the use of software that is published by Parabola. +# The use of third-party software is discouraged with a "use at your own risk" warning. +# These may be community-maintained or maintained privately by the local user or sysadmin. +# They may be hosted on the internet, on the local network, or only on the local computer. +# See the pacman manpage for details on creating your own repositories. -# NOTE: Nonprism is a particular repository that aims to provide software built -# and patched without services under global data surveillance programs like PRISM, -# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism + +########################### +# Parabola standard repos # +########################### #[nonprism-testing] #Include = /etc/pacman.d/mirrorlist @@ -84,6 +125,11 @@ LocalFileSigLevel = Optional [libre] Include = /etc/pacman.d/mirrorlist + +####################### +# Arch standard repos # +####################### + #[testing] #Include = /etc/pacman.d/mirrorlist @@ -99,9 +145,10 @@ Include = /etc/pacman.d/mirrorlist [community] Include = /etc/pacman.d/mirrorlist -# The PCR (Parabola Community Repository) contains packages maintained by trusted -# members of the Parabola community. It also contains packages maintained by -# Parabola developers, but that the developer decided didn't belong in core/libre. + +###################### +# Supplemental repos # +###################### #[pcr-testing] #Include = /etc/pacman.d/mirrorlist @@ -109,13 +156,18 @@ Include = /etc/pacman.d/mirrorlist [pcr] Include = /etc/pacman.d/mirrorlist -# Parabola also supports another community projects and personal repositories, to -# find them check out this wiki page: https://wiki.parabola.nu/Repositories -# An example of a custom package repository. See the pacman manpage for -# tips on creating your own repositories. +###################### +# User-defined repos # +###################### + #[custom] #SigLevel = Optional TrustAll #Server = file:///home/custompkgs + +############## +# Over-rides # +############## + Include = /etc/pacman.d/*.conf diff --git a/libre/pacman/pacman.conf.i686 b/libre/pacman/pacman.conf.i686 index 2bdd4a3a9..c52c43e6a 100644 --- a/libre/pacman/pacman.conf.i686 +++ b/libre/pacman/pacman.conf.i686 @@ -61,16 +61,57 @@ LocalFileSigLevel = Optional # Include = IncludePath # # The header [repo-name] is crucial - it must be present and -# uncommented to enable the repo. +# un-commented to enable the repo. # +# An example of a custom package repository is given below +# in the "User-defined repos" section +# +# Some repositories are disabled by default. To enable them, un-comment the +# repo name header (e.g. '[nonprism]') and the following 'Include' line. +# You can add preferred servers for each repo between the header and "Include" line, +# according to the format in /etc/pacman.d/mirrorlist, +# and those will be preferred over the standard mirrors for that repo. +# +# The order in which these entries appear in this file is critical. +# Much of the Parabola magic that supports advanced features such as +# multiple init-systems and multiple layers of freedom and privacy, +# depends on the order in which these repos are defined. +# Moving or adding repos out of the expected order can make your system insane. -# The testing repositories are disabled by default. To enable, uncomment the -# repo name header and Include lines. You can add preferred servers immediately -# after the header, and they will be used before the default mirrors. +# Notes on special repositories: +# +# Non-prism is a repository for enhanced privacy, beyond the FSDG requirements. +# It contains specially patched versions of certain software from the standard repos, +# that are known to include privacy-sensative features that some people may want to use, +# but that others may consider to be undesirable anti-features. +# For more info see: https://wiki.parabola.nu/Nonprism +# +# The non-systemd repository contains packages that are important and relevant only to +# Parabola systems using an init-system other than systemd. +# Parabola systems using systemd SHOULD NOT have this enabled;. +# while Parabola systems using any other init-system SHOULD have this enabled. +# +# The kernels repository contains additional special kernels for particular use-cases, +# such as maximal security hardening and real-time systems. +# +# The PCR (Parabola Community Repository) contains additional packages, +# most often requested by Parabola users, that are not considered to be +# part of the standard Parabola/Arch system, but are nonetheless useful or fun. +# +# Multi-lib repositories allow 32-bit applications to run on x86_64 systems. +# +# The Parabola system also supports custom, user-defined, repositories; +# but be aware that the Parabola team can not recommend nor support their use. +# The Parabola team can only support the use of software that is published by Parabola. +# The use of third-party software is discouraged with a "use at your own risk" warning. +# These may be community-maintained or maintained privately by the local user or sysadmin. +# They may be hosted on the internet, on the local network, or only on the local computer. +# See the pacman manpage for details on creating your own repositories. -# NOTE: Nonprism is a particular repository that aims to provide software built -# and patched without services under global data surveillance programs like PRISM, -# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism + +########################### +# Parabola standard repos # +########################### #[nonprism-testing] #Include = /etc/pacman.d/mirrorlist @@ -84,6 +125,11 @@ LocalFileSigLevel = Optional [libre] Include = /etc/pacman.d/mirrorlist + +####################### +# Arch standard repos # +####################### + #[testing] #Include = /etc/pacman.d/mirrorlist @@ -99,9 +145,10 @@ Include = /etc/pacman.d/mirrorlist [community] Include = /etc/pacman.d/mirrorlist -# The PCR (Parabola Community Repository) contains packages maintained by trusted -# members of the Parabola community. It also contains packages maintained by -# Parabola developers, but that the developer decided didn't belong in core/libre. + +###################### +# Supplemental repos # +###################### #[pcr-testing] #Include = /etc/pacman.d/mirrorlist @@ -109,13 +156,18 @@ Include = /etc/pacman.d/mirrorlist [pcr] Include = /etc/pacman.d/mirrorlist -# Parabola also supports another community projects and personal repositories, to -# find them check out this wiki page: https://wiki.parabola.nu/Repositories -# An example of a custom package repository. See the pacman manpage for -# tips on creating your own repositories. +###################### +# User-defined repos # +###################### + #[custom] #SigLevel = Optional TrustAll #Server = file:///home/custompkgs + +############## +# Over-rides # +############## + Include = /etc/pacman.d/*.conf diff --git a/libre/pacman/pacman.conf.x86_64 b/libre/pacman/pacman.conf.x86_64 index 67e6a00dd..1af5cc2ae 100644 --- a/libre/pacman/pacman.conf.x86_64 +++ b/libre/pacman/pacman.conf.x86_64 @@ -61,16 +61,57 @@ LocalFileSigLevel = Optional # Include = IncludePath # # The header [repo-name] is crucial - it must be present and -# uncommented to enable the repo. +# un-commented to enable the repo. # +# An example of a custom package repository is given below +# in the "User-defined repos" section +# +# Some repositories are disabled by default. To enable them, un-comment the +# repo name header (e.g. '[nonprism]') and the following 'Include' line. +# You can add preferred servers for each repo between the header and "Include" line, +# according to the format in /etc/pacman.d/mirrorlist, +# and those will be preferred over the standard mirrors for that repo. +# +# The order in which these entries appear in this file is critical. +# Much of the Parabola magic that supports advanced features such as +# multiple init-systems and multiple layers of freedom and privacy, +# depends on the order in which these repos are defined. +# Moving or adding repos out of the expected order can make your system insane. + +# Notes on special repositories: +# +# Non-prism is a repository for enhanced privacy, beyond the FSDG requirements. +# It contains specially patched versions of certain software from the standard repos, +# that are known to include privacy-sensative features that some people may want to use, +# but that others may consider to be undesirable anti-features. +# For more info see: https://wiki.parabola.nu/Nonprism +# +# The non-systemd repository contains packages that are important and relevant only to +# Parabola systems using an init-system other than systemd. +# Parabola systems using systemd SHOULD NOT have this enabled;. +# while Parabola systems using any other init-system SHOULD have this enabled. +# +# The kernels repository contains additional special kernels for particular use-cases, +# such as maximal security hardening and real-time systems. +# +# The PCR (Parabola Community Repository) contains additional packages, +# most often requested by Parabola users, that are not considered to be +# part of the standard Parabola/Arch system, but are nonetheless useful or fun. +# +# Multi-lib repositories allow 32-bit applications to run on x86_64 systems. +# +# The Parabola system also supports custom, user-defined, repositories; +# but be aware that the Parabola team can not recommend nor support their use. +# The Parabola team can only support the use of software that is published by Parabola. +# The use of third-party software is discouraged with a "use at your own risk" warning. +# These may be community-maintained or maintained privately by the local user or sysadmin. +# They may be hosted on the internet, on the local network, or only on the local computer. +# See the pacman manpage for details on creating your own repositories. -# The testing repositories are disabled by default. To enable, uncomment the -# repo name header and Include lines. You can add preferred servers immediately -# after the header, and they will be used before the default mirrors. -# NOTE: Nonprism is a particular repository that aims to provide software built -# and patched without services under global data surveillance programs like PRISM, -# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism +########################### +# Parabola standard repos # +########################### #[nonprism-testing] #Include = /etc/pacman.d/mirrorlist @@ -84,6 +125,17 @@ LocalFileSigLevel = Optional [libre] Include = /etc/pacman.d/mirrorlist +#[kernels-testing] +#Include = /etc/pacman.d/mirrorlist + +#[kernels] +#Include = /etc/pacman.d/mirrorlist + + +####################### +# Arch standard repos # +####################### + #[testing] #Include = /etc/pacman.d/mirrorlist @@ -99,9 +151,10 @@ Include = /etc/pacman.d/mirrorlist [community] Include = /etc/pacman.d/mirrorlist -# The PCR (Parabola Community Repository) contains packages maintained by trusted -# members of the Parabola community. It also contains packages maintained by -# Parabola developers, but that the developer decided didn't belong in core/libre. + +###################### +# Supplemental repos # +###################### #[pcr-testing] #Include = /etc/pacman.d/mirrorlist @@ -109,8 +162,10 @@ Include = /etc/pacman.d/mirrorlist [pcr] Include = /etc/pacman.d/mirrorlist -# If you want to run 32 bit applications on your x86_64 system, -# enable the libre-multilib, multilib and pcr-multilib repositories as required here. + +############################ +# Cross-architecture repos # +############################ #[nonprism-multilib-testing] #Include = /etc/pacman.d/mirrorlist @@ -136,13 +191,18 @@ Include = /etc/pacman.d/mirrorlist #[pcr-multilib] #Include = /etc/pacman.d/mirrorlist -# Parabola also supports another community projects and personal repositories, to -# find them check out this wiki page: https://wiki.parabola.nu/Repositories -# An example of a custom package repository. See the pacman manpage for -# tips on creating your own repositories. +###################### +# User-defined repos # +###################### + #[custom] #SigLevel = Optional TrustAll #Server = file:///home/custompkgs + +############## +# Over-rides # +############## + Include = /etc/pacman.d/*.conf |