diff options
Diffstat (limited to 'libre/linux-libre-pck')
18 files changed, 137 insertions, 73 deletions
diff --git a/libre/linux-libre-pck/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch b/libre/linux-libre-pck/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch index 693b8791b..7aaecf303 100644 --- a/libre/linux-libre-pck/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch +++ b/libre/linux-libre-pck/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch @@ -1,7 +1,7 @@ -From 8d124d916897d965eafd7e85524d38756fb2d5ce Mon Sep 17 00:00:00 2001 +From ba0f7bad7435de617093d47ac4f0895a71dcee00 Mon Sep 17 00:00:00 2001 From: Willy Tarreau <w@xxxxxx> Date: Sun, 2 Dec 2012 19:59:28 +0100 -Subject: [PATCH 01/13] ARM: atags: add support for Marvell's u-boot +Subject: [PATCH 01/14] ARM: atags: add support for Marvell's u-boot Marvell uses a specific atag in its u-boot which includes among other information the MAC addresses for up to 4 network interfaces. @@ -47,5 +47,5 @@ index 6b335a9ff8c8..614150b53643 100644 }; -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch b/libre/linux-libre-pck/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch index 1c12a7edd..67aaf723e 100644 --- a/libre/linux-libre-pck/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch +++ b/libre/linux-libre-pck/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch @@ -1,7 +1,7 @@ -From 6f181867df1ccab0836928cc91a9388239b89086 Mon Sep 17 00:00:00 2001 +From 89b2c1805d92a98ccc424ecad060cb08ba8e6211 Mon Sep 17 00:00:00 2001 From: Willy Tarreau <w@xxxxxx> Date: Sun, 2 Dec 2012 19:56:58 +0100 -Subject: [PATCH 02/13] ARM: atags/fdt: retrieve MAC addresses from Marvell +Subject: [PATCH 02/14] ARM: atags/fdt: retrieve MAC addresses from Marvell boot loader The atags are parsed and if a Marvell atag is found, up to 4 MAC @@ -43,5 +43,5 @@ index 41fa7316c52b..807ed160a4b9 100644 } -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0003-SMILE-Plug-device-tree-file.patch b/libre/linux-libre-pck/0003-SMILE-Plug-device-tree-file.patch index c9099e761..e1416218a 100644 --- a/libre/linux-libre-pck/0003-SMILE-Plug-device-tree-file.patch +++ b/libre/linux-libre-pck/0003-SMILE-Plug-device-tree-file.patch @@ -1,7 +1,7 @@ -From a89566aa1896a895360380a6a4e66b997c059e02 Mon Sep 17 00:00:00 2001 +From d441e0ca2b03d5cc7e5034efc6b15b56698b353f Mon Sep 17 00:00:00 2001 From: Kevin Mihelich <kevin@archlinuxarm.org> Date: Fri, 5 Sep 2014 15:41:19 -0600 -Subject: [PATCH 03/13] SMILE Plug device tree file +Subject: [PATCH 03/14] SMILE Plug device tree file This adds a dts file for the SMILE Plug, which only differs from the Mirabox dts with the LED definitions. @@ -205,5 +205,5 @@ index 000000000000..d01308ab848b + }; +}; -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0004-fix-mvsdio-eMMC-timing.patch b/libre/linux-libre-pck/0004-fix-mvsdio-eMMC-timing.patch index 3c1c94f65..965b849b8 100644 --- a/libre/linux-libre-pck/0004-fix-mvsdio-eMMC-timing.patch +++ b/libre/linux-libre-pck/0004-fix-mvsdio-eMMC-timing.patch @@ -1,7 +1,7 @@ -From 80d34ee9819ed5400e37d4a9801f976d1c8281c0 Mon Sep 17 00:00:00 2001 +From 23883cf4470afeb33dc9c171978df76f5470f4f0 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich <kevin@archlinuxarm.org> Date: Fri, 5 Sep 2014 15:43:56 -0600 -Subject: [PATCH 04/13] fix mvsdio eMMC timing +Subject: [PATCH 04/14] fix mvsdio eMMC timing These changes from Globalscale change the MMC timing to allow the eMMC versions of the Mirabox and SMILE Plug to work. @@ -34,5 +34,5 @@ index 210247b3d11a..1a1802dc9ef4 100644 host->clock = ios->clock; host->ns_per_clk = 1000000000 / (host->base_clock / (m+1)); -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch b/libre/linux-libre-pck/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch index bcba33beb..e90048ad6 100644 --- a/libre/linux-libre-pck/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch +++ b/libre/linux-libre-pck/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch @@ -1,7 +1,7 @@ -From 0818bb121a785e899a143871e7b567b4ab1cde91 Mon Sep 17 00:00:00 2001 +From b8082b65dc78228d48e693c7bdf9dbe75a2043ff Mon Sep 17 00:00:00 2001 From: popcornmix <popcornmix@gmail.com> Date: Tue, 18 Feb 2014 01:43:50 -0300 -Subject: [PATCH 05/13] net/smsc95xx: Allow mac address to be set as a +Subject: [PATCH 05/14] net/smsc95xx: Allow mac address to be set as a parameter --- @@ -92,5 +92,5 @@ index 309b88acd3d0..7bc9feb891a1 100644 /* maybe the boot loader passed the MAC address in devicetree */ -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0006-set-default-cubietruck-led-triggers.patch b/libre/linux-libre-pck/0006-set-default-cubietruck-led-triggers.patch index 952bc1f4b..a5a9bcc44 100644 --- a/libre/linux-libre-pck/0006-set-default-cubietruck-led-triggers.patch +++ b/libre/linux-libre-pck/0006-set-default-cubietruck-led-triggers.patch @@ -1,7 +1,7 @@ -From 0879744ffdf15d57e51a023edac391acf3af80da Mon Sep 17 00:00:00 2001 +From 0cf9ae3f97075a40cd14e09c91de0468459c45d3 Mon Sep 17 00:00:00 2001 From: Kevin Mihelich <kevin@archlinuxarm.org> Date: Sat, 14 Feb 2015 12:32:27 +0100 -Subject: [PATCH 06/13] set default cubietruck led triggers +Subject: [PATCH 06/14] set default cubietruck led triggers Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> --- @@ -29,5 +29,5 @@ index 5649161de1d7..2be64a886555 100644 }; -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch b/libre/linux-libre-pck/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch index 6572bc84f..e29c41c6c 100644 --- a/libre/linux-libre-pck/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch +++ b/libre/linux-libre-pck/0007-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch @@ -1,7 +1,7 @@ -From 655d9afac9327f9ac6884e82146508f1c0a66c01 Mon Sep 17 00:00:00 2001 +From 8d59092709da9dc0f852411cb1bad579decd457c Mon Sep 17 00:00:00 2001 From: Kevin Mihelich <kevin@archlinuxarm.org> Date: Thu, 11 Aug 2016 00:42:37 -0600 -Subject: [PATCH 07/13] exynos4412-odroid: set higher minimum buck2 regulator +Subject: [PATCH 07/14] exynos4412-odroid: set higher minimum buck2 regulator voltage Set a higher minimum voltage to help reboot issue. @@ -26,5 +26,5 @@ index d7ad07fd48f9..53c31c01713b 100644 regulator-always-on; regulator-boot-on; -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0008-ARM-dove-enable-ethernet-on-D3Plug.patch b/libre/linux-libre-pck/0008-ARM-dove-enable-ethernet-on-D3Plug.patch index 927c84e9e..8e85907d0 100644 --- a/libre/linux-libre-pck/0008-ARM-dove-enable-ethernet-on-D3Plug.patch +++ b/libre/linux-libre-pck/0008-ARM-dove-enable-ethernet-on-D3Plug.patch @@ -1,7 +1,7 @@ -From 288a284da4996b5420bda1635a2240d0615912a3 Mon Sep 17 00:00:00 2001 +From c26422909f777d60214288dfdb538fa8cf510c5f Mon Sep 17 00:00:00 2001 From: Kevin Mihelich <kevin@archlinuxarm.org> Date: Sun, 7 May 2017 13:32:25 -0600 -Subject: [PATCH 08/13] ARM: dove: enable ethernet on D3Plug +Subject: [PATCH 08/14] ARM: dove: enable ethernet on D3Plug Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> --- @@ -27,5 +27,5 @@ index 826026c28f90..a4c9963e1261 100644 /* Samsung M8G2F eMMC */ &sdio0 { -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0009-power-add-power-sequence-library.patch b/libre/linux-libre-pck/0009-power-add-power-sequence-library.patch index a9fbf1ee8..e2dbaf12b 100644 --- a/libre/linux-libre-pck/0009-power-add-power-sequence-library.patch +++ b/libre/linux-libre-pck/0009-power-add-power-sequence-library.patch @@ -1,7 +1,7 @@ -From 19a5d3c65f38ed602ab452ab7226d533b4ca66df Mon Sep 17 00:00:00 2001 +From ce6183d0a8a9aea1a1d9acc9a85a05d73e741023 Mon Sep 17 00:00:00 2001 From: Peter Chen <peter.chen@nxp.com> Date: Wed, 21 Jun 2017 14:42:03 +0800 -Subject: [PATCH 09/13] power: add power sequence library +Subject: [PATCH 09/14] power: add power sequence library We have an well-known problem that the device needs to do some power sequence before it can be recognized by related host, the typical @@ -786,5 +786,5 @@ index 000000000000..c5b278f5f2ae + +#endif /* __LINUX_PWRSEQ_H */ -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch b/libre/linux-libre-pck/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch index 7b51f8047..5737cac20 100644 --- a/libre/linux-libre-pck/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch +++ b/libre/linux-libre-pck/0010-usb-core-add-power-sequence-handling-for-USB-devices.patch @@ -1,7 +1,7 @@ -From 3725bba0f1591b698482f4b144dc311199ef492b Mon Sep 17 00:00:00 2001 +From 5b874f0a1f92812bc797c01fa558f0ab4ed338ae Mon Sep 17 00:00:00 2001 From: Peter Chen <peter.chen@nxp.com> Date: Wed, 21 Jun 2017 14:42:05 +0800 -Subject: [PATCH 10/13] usb: core: add power sequence handling for USB devices +Subject: [PATCH 10/14] usb: core: add power sequence handling for USB devices Some hard-wired USB devices need to do power sequence to let the device work normally, the typical power sequence like: enable USB @@ -39,7 +39,7 @@ index 987fc5ba6321..bd09fc8ff763 100644 ---help--- Universal Serial Bus (USB) is a specification for a serial bus diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c -index aa9968d90a48..14b93b844aaa 100644 +index e3bf65e213cd..f6a739bbe754 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -28,6 +28,7 @@ @@ -160,5 +160,5 @@ index 4dc769ee9c74..b5d5c4818f90 100644 /** -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch b/libre/linux-libre-pck/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch index f77b425fd..7c5261680 100644 --- a/libre/linux-libre-pck/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch +++ b/libre/linux-libre-pck/0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch @@ -1,7 +1,7 @@ -From bc2e28fa4c09da9f27de359a576ad46f0c108dae Mon Sep 17 00:00:00 2001 +From dd0ec5ddeff7c8435888e7250eb47954740e7e5d Mon Sep 17 00:00:00 2001 From: Joshua Clayton <stillcompiling@gmail.com> Date: Wed, 21 Jun 2017 14:42:06 +0800 -Subject: [PATCH 11/13] ARM: dts: imx6qdl: Enable usb node children with <reg> +Subject: [PATCH 11/14] ARM: dts: imx6qdl: Enable usb node children with <reg> Give usb nodes #address and #size attributes, so that a child node representing a permanently connected device such as an onboard hub may @@ -45,5 +45,5 @@ index c003e62bf290..7ffd2f1f769e 100644 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_USBOH3>; -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch b/libre/linux-libre-pck/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch index fb95ba5d7..606b49708 100644 --- a/libre/linux-libre-pck/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch +++ b/libre/linux-libre-pck/0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch @@ -1,7 +1,7 @@ -From b2ad93788d10a09f72eb170cf0f13ddecc540ff4 Mon Sep 17 00:00:00 2001 +From 01dea63eabb838525a193c32526791f6880c2b79 Mon Sep 17 00:00:00 2001 From: Peter Chen <peter.chen@nxp.com> Date: Wed, 21 Jun 2017 14:42:07 +0800 -Subject: [PATCH 12/13] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB +Subject: [PATCH 12/14] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property The current dts describes USB HUB's property at USB controller's @@ -76,5 +76,5 @@ index 906387915dc5..d3cc0b666e0d 100644 &usdhc3 { -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch b/libre/linux-libre-pck/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch index 16c3f2336..0eaf2c470 100644 --- a/libre/linux-libre-pck/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch +++ b/libre/linux-libre-pck/0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch @@ -1,7 +1,7 @@ -From 90445c490f11a0afefc9ccbae3ca5893ad0ddb15 Mon Sep 17 00:00:00 2001 +From 29a513109fa45d1039d7f52aacb3fc4a188e60d4 Mon Sep 17 00:00:00 2001 From: Joshua Clayton <stillcompiling@gmail.com> Date: Wed, 21 Jun 2017 14:42:08 +0800 -Subject: [PATCH 13/13] ARM: dts: imx6q-evi: Fix onboard hub reset line +Subject: [PATCH 13/14] ARM: dts: imx6q-evi: Fix onboard hub reset line Previously the onboard hub was made to work by treating its reset gpio as a regulator enable. @@ -70,5 +70,5 @@ index fcd257bc5ac3..d32fa81bba95 100644 >; }; -- -2.17.0 +2.18.0 diff --git a/libre/linux-libre-pck/0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch b/libre/linux-libre-pck/0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch new file mode 100644 index 000000000..8dbde1ca0 --- /dev/null +++ b/libre/linux-libre-pck/0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch @@ -0,0 +1,61 @@ +From ac139b06e1b309c605c65cea2d547cbba4ae5370 Mon Sep 17 00:00:00 2001 +From: Ethan Tuttle <ethan@ethantuttle.com> +Date: Tue, 19 Jun 2018 21:31:08 -0700 +Subject: [PATCH 14/14] ARM: mvebu: declare asm symbols as character arrays in + pmsu.c + +With CONFIG_FORTIFY_SOURCE, memcpy uses the declared size of operands to +detect buffer overflows. If src or dest is declared as a char, attempts to +copy more than byte will result in a fortify_panic(). + +Address this problem in mvebu_setup_boot_addr_wa() by declaring +mvebu_boot_wa_start and mvebu_boot_wa_end as character arrays. Also remove +a couple addressof operators to avoid "arithmetic on pointer to an +incomplete type" compiler error. + +See commit 54a7d50b9205 ("x86: mark kprobe templates as character arrays, +not single characters") for a similar fix. + +Fixes "detected buffer overflow in memcpy" error during init on some mvebu +systems (armada-370-xp, armada-375): + +(fortify_panic) from (mvebu_setup_boot_addr_wa+0xb0/0xb4) +(mvebu_setup_boot_addr_wa) from (mvebu_v7_cpu_pm_init+0x154/0x204) +(mvebu_v7_cpu_pm_init) from (do_one_initcall+0x7c/0x1a8) +(do_one_initcall) from (kernel_init_freeable+0x1bc/0x254) +(kernel_init_freeable) from (kernel_init+0x8/0x114) +(kernel_init) from (ret_from_fork+0x14/0x2c) + +Signed-off-by: Ethan Tuttle <ethan@ethantuttle.com> +Tested-by: Ethan Tuttle <ethan@ethantuttle.com> +--- + arch/arm/mach-mvebu/pmsu.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c +index 27a78c80e5b1..73d5d72dfc3e 100644 +--- a/arch/arm/mach-mvebu/pmsu.c ++++ b/arch/arm/mach-mvebu/pmsu.c +@@ -116,8 +116,8 @@ void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) + PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); + } + +-extern unsigned char mvebu_boot_wa_start; +-extern unsigned char mvebu_boot_wa_end; ++extern unsigned char mvebu_boot_wa_start[]; ++extern unsigned char mvebu_boot_wa_end[]; + + /* + * This function sets up the boot address workaround needed for SMP +@@ -130,7 +130,7 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, + phys_addr_t resume_addr_reg) + { + void __iomem *sram_virt_base; +- u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start; ++ u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start; + + mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute, +-- +2.18.0 + diff --git a/libre/linux-libre-pck/PKGBUILD b/libre/linux-libre-pck/PKGBUILD index 9e0ef8dff..452dacd38 100644 --- a/libre/linux-libre-pck/PKGBUILD +++ b/libre/linux-libre-pck/PKGBUILD @@ -11,7 +11,7 @@ pkgbase=linux-libre-pck _pkgbasever=4.17-gnu -_pkgver=4.17.3-gnu +_pkgver=4.17.6-gnu _pckpatchver=pck1 _replacesarchkernel=('linux-zen') @@ -22,7 +22,7 @@ _srcname=linux-${_pkgbasever%-*} _archpkgver=${_pkgver%-*} pkgver=${_pkgver//-/_}.${_pckpatchver} pkgrel=1 -rcnrel=armv7-x3 +rcnrel=armv7-x7 arch=('i686' 'x86_64' 'armv7h') url="https://wiki.parabola.nu/PCK" license=('GPL2') @@ -56,6 +56,7 @@ source=( '0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch' '0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch' '0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch' + '0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch' # other patches '0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch' '0002-fix-Atmel-maXTouch-touchscreen-support.patch' @@ -66,9 +67,9 @@ validpgpkeys=( ) sha512sums=('a09014005d64839e958cabb20dbd50e051907b1afea2f517f41f0a9312fa1bc8447690e64ec0e6488a778be8a7384891c003f39029ff5799f9884482628aadf2' 'SKIP' - 'f885c0025d1c5c4a7b194fc0c59c602760a2e4bc382c8dd66987d8de8c4c18d463793d137c9beb0030edb63bedd215587e6bf3e254d8e03f1f59ffe49ee1752f' + 'e87d8039431db2fc26480d2079705056638a2147e97840a331f520ad273e4a0ac57b4d939ee1fe8fff9ac8518680be21513a2a0ab7dda618ca85b603b218c22b' 'SKIP' - 'cbcc6835f2097fe62c98d9c87cb53fbff65e5d2b47e9a1055d26b096e48e40066aded1b971f5124bd1b631c2357b2514e77db8122605c24cf921758452264a53' + 'f83e76d558c4c5c0581edd5a9d0d076050f371a0e45afe4df4a2e275319c330a79b8fa9385fe1a421355691bbb4424dd3ee431ac78e8faaf66d9a78ec841d751' 'SKIP' '13cb5bc42542e7b8bb104d5f68253f6609e463b6799800418af33eb0272cc269aaa36163c3e6f0aacbdaaa1d05e2827a4a7c4a08a029238439ed08b89c564bb3' 'SKIP' @@ -76,27 +77,28 @@ sha512sums=('a09014005d64839e958cabb20dbd50e051907b1afea2f517f41f0a9312fa1bc8447 'SKIP' '7a3716bfe3b9f546da309c7492f3e08f8f506813afeb1c737a474c83313d5c313cf4582b65215c2cfce3b74d9d1021c96e8badafe8f6e5b01fe28d2b5c61ae78' 'SKIP' - '12259e94b4c97d7f2532a5478b7227d4c335a76a145fcd95d2aedcf8e2959427086acb670b17d7c1aa8fe564b04854ac70ee8003e914c311e681023a9d293651' - '1bd028a2d9f20398177ff99fb469acb01006e2fad23fa4d2b75e289557005135fad500451485af8cf5bf1b3a58474f4c544f402f10d0f684e2d7eaff3c1ae601' - '79acba4759d39c7682cf34e7cb1740335f1d0c38aaeba88cc79f1df0aa359092c81c0c43f0afa89411b6c9f90219be890d0c6741980b0bae417f58095db6089d' + '9de11b796d1acd3e02b8cd1e024f7af1c57d896c92ffed41bb728ea3457d5b5241dce51d5961d2637aa2909d65827f32fb0debd4c6772cb75a85a6658b72f9d1' + 'c0688d828813eaeb1f837cb0ffc25ebba584d47e7080f27873bd9ad6dfec2c3fbc781106d25204128ad3385f9af82a5cf7a3ed92dad69632bc5d1bfcf7dd61c5' + 'a6fb9fd8c42232457de3dafa6291afeb31a595119b91adb6d673080899942a6ca4718438b54c011c6b87031cce746af94a12ee81ceb033c69a354d19fe6b60c0' '7ad5be75ee422dda3b80edd2eb614d8a9181e2c8228cd68b3881e2fb95953bf2dea6cbe7900ce1013c9de89b2802574b7b24869fc5d7a95d3cc3112c4d27063a' '4a8b324aee4cccf3a512ad04ce1a272d14e5b05c8de90feb82075f55ea3845948d817e1b0c6f298f5816834ddd3e5ce0a0e2619866289f3c1ab8fd2f35f04f44' '2dc6b0ba8f7dbf19d2446c5c5f1823587de89f4e28e9595937dd51a87755099656f2acec50e3e2546ea633ad1bfd1c722e0c2b91eef1d609103d8abdc0a7cbaf' - 'e48864992df4f40d828a5dc5cb5d35e520b9d498638f0e44d2c2c21dc9b0555d3d211e655cf15bd2e1f5d23594f8f380aa2d8a4293b0cdf4dc6c53020ba6d421' + '93909dee8e89a5e243489c3c47b6b1023b4064bea7688e6d395912383e1d2e69b64c2dea161ef85ce9a52ff24b0de8fe975297cd1b17eaebc1f72a9d6a5cafbe' 'SKIP' - '8b946f1baa0ecbae0d70781ff67d9cc6ab4abbb8c5768bfd1fbf211de3a3d17f3b9c5a0e5bc588bd90a730051bdfb6b530ab2b30b8142e9adb33f84684b008fe' - '382ae823f4a1c9105ab9bae6a5d2871eba7f1a888da3a2acdb17cecdbe542613f2f27bb5aaab236d205593bebb57cd91cb7d3de9b70b837f35c3eeb96ace44e3' - '1f1826e3e1be079f6153e927151d3d0beaed5ed6b5032841d443f25d5af89c0c769d2ba00c5b95cb7338bc7bc04ea65a312116640431e7fbe17e9850f43df894' - '1c578fa28c25557b2ad647974330c4238f3bd70212bda23d1eac45ca7815b573768ec88d61c7d2b61e59d48f58d25883b2f862124b6bacafde754b8883d6cdb5' - '0be0572cee24d7d34782f8b0fb2e8597bd7ad1ccc2603e1fd7372f7e8cae9ba5f1e627aaa2960aa4f145032e2ddee11021a226bbcd1439c24a61cb66d82b13a6' - 'c0568844b4eae0ff56ff4293d075b4523ef69e75c2ee0349c3a5460c18a048bafad3f95bad957fc3692c43d7843354ee0603048d17d73c6ac0b97162e1c295c2' - 'dd889b8e64baef3f9fee6a75111f4e1c5c420a8c72e25d89ff0db765bd7fbbae985a7cc6327d8bdb80e32d59e7fca9dc2e0dee2c4811bfdbab32783ce29ea842' - 'a34fc71e4dccadba3bef57cdb5fddb8524771b095a437d0449bc76da031dcc40edb083209f25731b58478a2c713f7245676adfed22a453a74aa85cf245a76944' - '6cd12c8947a661fda1a1f0f1d84cfaa8d6f66300d4495a59131b7df1ed6b10ce21cddb3291d25f1ebb0798d9b711af68c18b46c34122425b21f946000ab743e8' - 'ae2432ade54b0a703473ed804a08fc6346bf20b427dd56d0bd188bf56398aee3dc61e3e7740353943a7928992073894215f222c24a46fe5440a2058567ba5452' - '09ee66f32cdc0d17a200e1f87175030a0180158840dec18be45f6329039f08100782a9f30af939a09f94fa4ab11739620c9993078555de5a5b1942affad3047f' - '9a2ef810d62c2120e6a662f4c58e4644dac83e6fd8317ce7d5641421b89ac60de117204e4fa4024c76a61db495a066802af37c21a9470c536b8d86ae0ac398ba' - '850e6b8684db4dd6946f69690caaa34a350228d3fed0e08b461835337250c78f511d064fb8fcd2003c5112e68fd9a66b61111c5e3ca4f53b80a0922d8d5f5fba' + 'c6e758931e599199db07276a51b204a4030e0da80f08df60783278cf3d4d3ee6c0c280cc1788ca024cdf2043a39dd527e2205dd678368097b68240a7e80b931c' + '3e0852e188549e60fa35b70e82740d5124936688d5f5ff0314c4e555ad9cc4c7688c56b5949baa8fd67ede22a579019919b09091b59eafac60409fdf18105af5' + 'f80538cfb1af660a3dc2a8bf31ada1132d24d81064b347419d221417ad8e0e949431ef277b22fee771b6f9d43abf47d3e6a92ce4f5928a6cc4f25f0b628ba02a' + 'e09ef9f021515474d41a3cb3d11b88a133db012b322a604cc6597b675d9b98c96dbd5cc447426f053bcb00598d640f9ba0651d1496762cf39ee3f698b03b0416' + 'f0573b49e4184ddcac6e273c46a63439dfcea7ca0b7a232bf35fb22979bf593fdb18f6dbe243505a22dd94b465c22f2a92cab13d159d76aa330f9a4cf3f17971' + '56f20c4f0683e9a2d0936fe0669449485043431d8b77fcbdec30bad88349db8ed7d1286af5f3ad4732561533e716b0df6faa094d7a5b9a84acfea756d3139ac0' + 'a5f73c34912393bdf49cde6dd4e99d16f6a95a267e9384a5bc33633d89a0669a3dac49fdf3efb43aa0e477d520fcb577d826f3a2907f11d1d7584ca9e2d90faa' + '155b2b44d320a2605473c95ffb6664ba34ba806f8e53f951f2471adb45f0f6e18f04e409b31620c4fa096090916a4f1af69a3d7e467395a2845d4c0657927891' + '9b6f5fbc5738e1d83caad3328d2cc9bfc7e60a1a09a9eaaffb739952e13f630c029bb3472f7b4385fa52bd6953fd7e7492a44258d5b4baf30f81c99c71965b9a' + 'd32f7808c35cb58d7218c4cfe42d0967ee0975346827580b3fd34c1a45a975560b276cec909954d27a6feff23f4364b8a802501a03f46ac8e6b61f16910cb784' + 'b6b39a2fdc5963611806d387866edab43eb52c591b05d92e0ed887657d43383ddfc2e088b7063bd6586ff872203fdbf0348fecc2c1f673134a8cc5112a1d4179' + '79da6491df96d8bc13edc2bd071b8859a7f915a72244992869e3be44c3118fd3421d9fff4fe6c858895ad8c19dcc02d8d3b458dc6f3efbae3120693708af31b4' + '1d0626f6e95ffe71dbbf281167d312a8acfc300930b39e80ef7771a2b65091e974e2ec703d463d8fc16d36472f5f5deb28b77d854c0e96685d31e42040d18f6d' + 'a4d72cdcddc3f43f27e0d415e1d8ce45bc552ee07d29b566cd8128715daf8267f549968434ca6a949b39aed8bbd6b8790f65f7f4641d8008d1b856d8f1a8ee94' '02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af' 'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168') @@ -142,6 +144,7 @@ prepare() { patch -p1 -i ../0011-ARM-dts-imx6qdl-Enable-usb-node-children-with-reg.patch patch -p1 -i ../0012-ARM-dts-imx6qdl-udoo.dtsi-fix-onboard-USB-HUB-proper.patch patch -p1 -i ../0013-ARM-dts-imx6q-evi-Fix-onboard-hub-reset-line.patch + patch -p1 -i ../0014-ARM-mvebu-declare-asm-symbols-as-character-arrays-in.patch fi # add freedo as boot logo diff --git a/libre/linux-libre-pck/config.armv7h b/libre/linux-libre-pck/config.armv7h index 45e5cb947..7096fe86e 100644 --- a/libre/linux-libre-pck/config.armv7h +++ b/libre/linux-libre-pck/config.armv7h @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.17.3-gnu-1-pck Kernel Configuration +# Linux/arm 4.17.6-gnu-1-pck Kernel Configuration # CONFIG_ARM=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -6937,7 +6937,6 @@ CONFIG_DMA_ENGINE_RAID=y CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_AUXDISPLAY is not set -CONFIG_ARM_CHARLCD=y CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV_GENIRQ=m diff --git a/libre/linux-libre-pck/config.i686 b/libre/linux-libre-pck/config.i686 index 68d8e5206..c18d42faa 100644 --- a/libre/linux-libre-pck/config.i686 +++ b/libre/linux-libre-pck/config.i686 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 4.17.3-gnu-1-pck Kernel Configuration +# Linux/x86 4.17.6-gnu-1-pck Kernel Configuration # # CONFIG_64BIT is not set CONFIG_X86_32=y @@ -48,7 +48,7 @@ CONFIG_THREAD_INFO_IN_TASK=y # General setup # CONFIG_PCK_INTERACTIVE=y -CONFIG_SCHED_MUQSS=y +# CONFIG_SCHED_MUQSS is not set CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set @@ -161,6 +161,9 @@ CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_CGROUP_WRITEBACK=y CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +# CONFIG_RT_GROUP_SCHED is not set CONFIG_CGROUP_PIDS=y CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y @@ -168,6 +171,7 @@ CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y CONFIG_CGROUP_BPF=y # CONFIG_CGROUP_DEBUG is not set @@ -179,6 +183,7 @@ CONFIG_USER_NS=y # CONFIG_USER_NS_UNPRIVILEGED is not set CONFIG_PID_NS=y CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y @@ -524,13 +529,9 @@ CONFIG_NR_CPUS_RANGE_END=8 CONFIG_NR_CPUS_DEFAULT=8 CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y -CONFIG_SMT_NICE=y CONFIG_SCHED_MC=y CONFIG_SCHED_MC_PRIO=y CONFIG_RQ_NONE=y -# CONFIG_RQ_SMT is not set -# CONFIG_RQ_MC is not set -# CONFIG_RQ_SMP is not set CONFIG_SHARERQ=0 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set @@ -7420,7 +7421,6 @@ CONFIG_ASYNC_TX_DMA=y CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set CONFIG_AUXDISPLAY=y -CONFIG_CHARLCD=m CONFIG_HD44780=m CONFIG_KS0108=m CONFIG_KS0108_PORT=0x378 @@ -7433,6 +7433,7 @@ CONFIG_PANEL=m CONFIG_PANEL_PARPORT=0 CONFIG_PANEL_PROFILE=5 # CONFIG_PANEL_CHANGE_MESSAGE is not set +CONFIG_CHARLCD=m CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV_GENIRQ=m diff --git a/libre/linux-libre-pck/config.x86_64 b/libre/linux-libre-pck/config.x86_64 index 4794bf35a..5c4c7a93f 100644 --- a/libre/linux-libre-pck/config.x86_64 +++ b/libre/linux-libre-pck/config.x86_64 @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 4.17.3-gnu-1-pck Kernel Configuration +# Linux/x86 4.17.6-gnu-1-pck Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y @@ -6252,7 +6252,7 @@ CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m +# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m @@ -7343,7 +7343,6 @@ CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set CONFIG_DCA=m CONFIG_AUXDISPLAY=y -CONFIG_CHARLCD=m CONFIG_HD44780=m CONFIG_KS0108=m CONFIG_KS0108_PORT=0x378 @@ -7356,6 +7355,7 @@ CONFIG_PANEL=m CONFIG_PANEL_PARPORT=0 CONFIG_PANEL_PROFILE=5 # CONFIG_PANEL_CHANGE_MESSAGE is not set +CONFIG_CHARLCD=m CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV_GENIRQ=m |