diff options
Diffstat (limited to 'libre-testing')
4 files changed, 173 insertions, 894 deletions
diff --git a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch index ac4f758fe..326b4aaa0 100644 --- a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch +++ b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch @@ -1,6 +1,6 @@ diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg --- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-24 01:42:53.330380669 -0300 ++++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-23 18:15:32.854611743 -0300 @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Seco USA Inc @@ -62,7 +62,7 @@ diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg --- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-24 01:42:53.330380669 -0300 ++++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-23 18:15:32.854611743 -0300 @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2013 Seco USA Inc @@ -150,7 +150,7 @@ diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/u +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg --- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-24 01:42:53.330380669 -0300 ++++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-23 18:15:32.854611743 -0300 @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2013 Boundary Devices @@ -183,15 +183,24 @@ diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/u +#include "clocks.cfg" diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig --- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-24 01:42:53.330380669 -0300 ++++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-23 18:15:32.854611743 -0300 @@ -0,0 +1,3 @@ +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" +CONFIG_ARM=y +CONFIG_TARGET_UDOO=y diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h --- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 -+++ u-boot-2015.01/include/configs/udoo.h 2016-02-24 01:47:09.384245992 -0300 -@@ -96,11 +96,26 @@ ++++ u-boot-2015.01/include/configs/udoo.h 2016-02-23 18:24:17.779054304 -0300 +@@ -78,7 +78,7 @@ + #define CONFIG_CMD_BMODE + #define CONFIG_CMD_SETEXPR + +-#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTDELAY 1 + + #define CONFIG_SYS_MEMTEST_START 0x10000000 + #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) +@@ -96,60 +96,107 @@ #define CONFIG_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT @@ -207,35 +216,174 @@ diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/conf #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" +#endif + -+/* Enable extlinux boot support */ ++/* Enable Extlinux boot support */ +#define CONFIG_CMD_PXE +#define CONFIG_MENU +#define BOOT_TARGET_DEVICES(func) +#include <config_distro_bootcmd.h> #define CONFIG_EXTRA_ENV_SETTINGS \ +- "script=boot.scr\0" \ +- "image=zImage\0" \ +- "console=ttymxc1\0" \ + BOOTENV \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc1\0" \ -@@ -111,9 +126,11 @@ - "fdt_addr=0x18000000\0" \ - "boot_fdt=try\0" \ ++ "bootfile=zImage\0" \ ++ "bootdir=/boot\0" \ ++ "console=ttymxc1,115200\0" \ + "splashpos=m,m\0" \ + "fdt_high=0xffffffff\0" \ ++ "rdaddr=0x12A00000\0" \ ++ "rdfile=initramfs-linux.img\0" \ + "initrd_high=0xffffffff\0" \ +- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ +- "fdt_addr=0x18000000\0" \ +- "boot_fdt=try\0" \ ++ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ ++ "fdtdir=/boot/dtbs\0" \ ++ "fdtaddr=0x18000000\0" \ "ip_dyn=yes\0" \ ++ "optargs=\0" \ ++ "video=\0" \ + "devtype=mmc\0" \ + "devnum=0\0" \ "mmcdev=0\0" \ - "mmcpart=1\0" \ +- "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ +- "update_sd_firmware_filename=u-boot.imx\0" \ +- "update_sd_firmware=" \ +- "if test ${ip_dyn} = yes; then " \ +- "setenv get_cmd dhcp; " \ + "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ - "update_sd_firmware_filename=u-boot.imx\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ -@@ -178,6 +195,7 @@ ++ "mmcargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=${mmcroot} " \ ++ "video=${video}\0" \ ++ "videoargs=" \ ++ "setenv nextcon 0; " \ ++ "if hdmidet; then " \ ++ "setenv bootargs ${bootargs} " \ ++ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ ++ "if=RGB24; " \ ++ "setenv fbmem fbmem=28M; " \ ++ "setexpr nextcon ${nextcon} + 1; " \ + "else " \ +- "setenv get_cmd tftp; " \ ++ "echo - no HDMI monitor;" \ + "fi; " \ +- "if mmc dev ${mmcdev}; then " \ +- "if ${get_cmd} ${update_sd_firmware_filename}; then " \ +- "setexpr fw_sz ${filesize} / 0x200; " \ +- "setexpr fw_sz ${fw_sz} + 1; " \ +- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ +- "fi; " \ +- "fi\0" \ +- "mmcargs=setenv bootargs console=${console},${baudrate} " \ +- "root=${mmcroot}\0" \ +- "loadbootscript=" \ +- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ +- "bootscript=echo Running bootscript from mmc ...; " \ +- "source\0" \ +- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ +- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ +- "mmcboot=echo Booting from mmc ...; " \ +- "run mmcargs; " \ +- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +- "if run loadfdt; then " \ +- "bootz ${loadaddr} - ${fdt_addr}; " \ ++ "i2c dev 1; " \ ++ "if i2c probe 0x10; then " \ ++ "setenv bootargs ${bootargs} " \ ++ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ ++ "if=RGB666; " \ ++ "if test 0 -eq ${nextcon}; then " \ ++ "setenv fbmem fbmem=10M; " \ + "else " \ +- "if test ${boot_fdt} = try; then " \ +- "bootz; " \ +- "else " \ +- "echo WARN: Cannot load the DT; " \ +- "fi; " \ ++ "setenv fbmem ${fbmem},10M; " \ + "fi; " \ ++ "setexpr nextcon ${nextcon} + 1; " \ + "else " \ +- "bootz; " \ ++ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ ++ "fi; " \ ++ "setenv bootargs ${bootargs} ${fbmem}\0" \ ++ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ ++ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ ++ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ ++ "mmcboot=mmc dev ${mmcdev}; " \ ++ "if mmc rescan; then " \ ++ "echo SD/MMC found on device ${mmcdev};" \ ++ "setenv bootpart ${mmcdev}:1; " \ ++ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ ++ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \ ++ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ ++ "env import -t ${loadaddr} ${filesize};" \ ++ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ ++ "echo Checking if uenvcmd is set ...;" \ ++ "if test -n ${uenvcmd}; then " \ ++ "echo Running uenvcmd ...;" \ ++ "run uenvcmd;" \ ++ "fi;" \ ++ "fi; " \ ++ "run scan_dev_for_boot;" \ ++ "if run loadimage; then " \ ++ "if run loadfdt; then " \ ++ "run mmcargs;" \ ++ "if run loadrd; then " \ ++ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ ++ "else " \ ++ "bootz ${loadaddr} - ${fdtaddr};" \ ++ "fi;" \ ++ "else " \ ++ "echo Kernel found, but no device tree found;" \ ++ "fi;" \ ++ "else " \ ++ "echo No kernel found;" \ ++ "fi;" \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ +@@ -161,10 +208,10 @@ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ +- "${get_cmd} ${image}; " \ ++ "${get_cmd} ${bootfile}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ +- "bootz ${loadaddr} - ${fdt_addr}; " \ ++ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \ ++ "bootz ${loadaddr} - ${fdtaddr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ +@@ -177,16 +224,7 @@ + "fi;\0" #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ -+ "run scan_dev_for_boot;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ +- "mmc dev ${mmcdev}; if mmc rescan; then " \ +- "if run loadbootscript; then " \ +- "run bootscript; " \ +- "else " \ +- "if run loadimage; then " \ +- "run mmcboot; " \ +- "else run netboot; " \ +- "fi; " \ +- "fi; " \ +- "else run netboot; fi" ++ "run mmcboot;" + + /* Miscellaneous configurable options */ + #define CONFIG_SYS_LONGHELP +@@ -227,6 +265,7 @@ + + #define CONFIG_OF_LIBFDT + #define CONFIG_CMD_BOOTZ ++#define CONFIG_SUPPORT_RAW_INITRD + + #ifndef CONFIG_SYS_DCACHE_OFF + #define CONFIG_CMD_CACHE diff --git a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 deleted file mode 100644 index ac4f758fe..000000000 --- a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 +++ /dev/null @@ -1,241 +0,0 @@ -diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg ---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D -+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 -+ -+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3 -+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63 -+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -+ -+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -+ -+ -+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -+ -+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -+ -+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -+ -+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -+ -+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -+ -+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251 -+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200 -+ -+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45 -+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744 -+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336 -+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630 -+ -+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038 -+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -+ -+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000 -+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D -+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg ---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,84 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Device Configuration Data (DCD) -+ * -+ * Each entry must have the format: -+ * Addr-type Address Value -+ * -+ * where: -+ * Addr-type register length (1,2 or 4 bytes) -+ * Address absolute address of the register -+ * value value to be stored in the register -+ */ -+ -+/* -+ * DDR3 settings -+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6DL ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 32 bits x16/x32 -+ */ -+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 -+ -+/* (differential input) */ -+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -+/* (differential input) */ -+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -+/* disable ddr pullups */ -+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 -+ -+/* Read data DQ Byte0-3 delay */ -+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 -diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg ---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,29 @@ -+/* -+ * Copyright (C) 2013 Boundary Devices -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Refer doc/README.imximage for more details about how-to configure -+ * and create imximage boot image -+ * -+ * The syntax is taken as close as possible with the kwbimage -+ */ -+ -+/* image version */ -+IMAGE_VERSION 2 -+ -+/* -+ * Boot Device : one of -+ * spi, sd (the board has no nand neither onenand) -+ */ -+BOOT_FROM sd -+ -+#define __ASSEMBLY__ -+#include <config.h> -+#include "asm/arch/mx6-ddr.h" -+#include "asm/arch/iomux.h" -+#include "asm/arch/crm_regs.h" -+ -+#include "ddr-setup_dl.cfg" -+#include "1066mhz_4x256mx16_dl.cfg" -+#include "clocks.cfg" -diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig ---- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,3 @@ -+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" -+CONFIG_ARM=y -+CONFIG_TARGET_UDOO=y -diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h ---- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 -+++ u-boot-2015.01/include/configs/udoo.h 2016-02-24 01:47:09.384245992 -0300 -@@ -96,11 +96,26 @@ - #define CONFIG_BOUNCE_BUFFER - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC - #define CONFIG_DOS_PARTITION - -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre ARM" -+ -+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) -+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb" -+#elif defined(CONFIG_MX6Q) - #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" -+#endif -+ -+/* Enable extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include <config_distro_bootcmd.h> - - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc1\0" \ -@@ -111,9 +126,11 @@ - "fdt_addr=0x18000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ -+ "devtype=mmc\0" \ -+ "devnum=0\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ -- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ -+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ - "update_sd_firmware_filename=u-boot.imx\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ -@@ -178,6 +195,7 @@ - - #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ -+ "run scan_dev_for_boot;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ diff --git a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing2 b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing2 deleted file mode 100644 index dbb449c7c..000000000 --- a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing2 +++ /dev/null @@ -1,628 +0,0 @@ -diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg ---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D -+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 -+ -+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3 -+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63 -+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -+ -+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -+ -+ -+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -+ -+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -+ -+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -+ -+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -+ -+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -+ -+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251 -+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200 -+ -+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45 -+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744 -+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336 -+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630 -+ -+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038 -+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -+ -+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000 -+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D -+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg ---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,84 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Device Configuration Data (DCD) -+ * -+ * Each entry must have the format: -+ * Addr-type Address Value -+ * -+ * where: -+ * Addr-type register length (1,2 or 4 bytes) -+ * Address absolute address of the register -+ * value value to be stored in the register -+ */ -+ -+/* -+ * DDR3 settings -+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6DL ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 32 bits x16/x32 -+ */ -+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 -+ -+/* (differential input) */ -+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -+/* (differential input) */ -+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -+/* disable ddr pullups */ -+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 -+ -+/* Read data DQ Byte0-3 delay */ -+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 -diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg ---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,29 @@ -+/* -+ * Copyright (C) 2013 Boundary Devices -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Refer doc/README.imximage for more details about how-to configure -+ * and create imximage boot image -+ * -+ * The syntax is taken as close as possible with the kwbimage -+ */ -+ -+/* image version */ -+IMAGE_VERSION 2 -+ -+/* -+ * Boot Device : one of -+ * spi, sd (the board has no nand neither onenand) -+ */ -+BOOT_FROM sd -+ -+#define __ASSEMBLY__ -+#include <config.h> -+#include "asm/arch/mx6-ddr.h" -+#include "asm/arch/iomux.h" -+#include "asm/arch/crm_regs.h" -+ -+#include "ddr-setup_dl.cfg" -+#include "1066mhz_4x256mx16_dl.cfg" -+#include "clocks.cfg" -diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig ---- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,3 @@ -+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" -+CONFIG_ARM=y -+CONFIG_TARGET_UDOO=y -diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h ---- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 -+++ u-boot-2015.01/include/configs/udoo.h 2016-02-23 18:24:17.779054304 -0300 -@@ -78,7 +78,7 @@ - #define CONFIG_CMD_BMODE - #define CONFIG_CMD_SETEXPR - --#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTDELAY 1 - - #define CONFIG_SYS_MEMTEST_START 0x10000000 - #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) -@@ -96,60 +96,107 @@ - #define CONFIG_BOUNCE_BUFFER - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC - #define CONFIG_DOS_PARTITION - -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre ARM" -+ -+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) -+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb" -+#elif defined(CONFIG_MX6Q) - #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" -+#endif -+ -+/* Enable extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include <config_distro_bootcmd.h> - - #define CONFIG_EXTRA_ENV_SETTINGS \ -- "script=boot.scr\0" \ -- "image=zImage\0" \ -- "console=ttymxc1\0" \ -+ BOOTENV \ -+ "bootfile=zImage\0" \ -+ "bootdir=/boot\0" \ -+ "console=ttymxc1,115200\0" \ - "splashpos=m,m\0" \ - "fdt_high=0xffffffff\0" \ -+ "rdaddr=0x12A00000\0" \ -+ "rdfile=initramfs-linux.img\0" \ - "initrd_high=0xffffffff\0" \ -- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ -- "fdt_addr=0x18000000\0" \ -- "boot_fdt=try\0" \ -+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ -+ "fdtdir=/boot/dtbs\0" \ -+ "fdtaddr=0x18000000\0" \ - "ip_dyn=yes\0" \ -+ "optargs=\0" \ -+ "video=\0" \ -+ "devtype=mmc\0" \ -+ "devnum=0\0" \ - "mmcdev=0\0" \ -- "mmcpart=1\0" \ -- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ -- "update_sd_firmware_filename=u-boot.imx\0" \ -- "update_sd_firmware=" \ -- "if test ${ip_dyn} = yes; then " \ -- "setenv get_cmd dhcp; " \ -+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${mmcroot} " \ -+ "video=${video}\0" \ -+ "videoargs=" \ -+ "setenv nextcon 0; " \ -+ "if hdmidet; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ -+ "if=RGB24; " \ -+ "setenv fbmem fbmem=28M; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ -- "setenv get_cmd tftp; " \ -+ "echo - no HDMI monitor;" \ - "fi; " \ -- "if mmc dev ${mmcdev}; then " \ -- "if ${get_cmd} ${update_sd_firmware_filename}; then " \ -- "setexpr fw_sz ${filesize} / 0x200; " \ -- "setexpr fw_sz ${fw_sz} + 1; " \ -- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ -- "fi; " \ -- "fi\0" \ -- "mmcargs=setenv bootargs console=${console},${baudrate} " \ -- "root=${mmcroot}\0" \ -- "loadbootscript=" \ -- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ -- "bootscript=echo Running bootscript from mmc ...; " \ -- "source\0" \ -- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ -- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ -- "mmcboot=echo Booting from mmc ...; " \ -- "run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "i2c dev 1; " \ -+ "if i2c probe 0x10; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ -+ "if=RGB666; " \ -+ "if test 0 -eq ${nextcon}; then " \ -+ "setenv fbmem fbmem=10M; " \ - "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -+ "setenv fbmem ${fbmem},10M; " \ - "fi; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ -- "bootz; " \ -+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ -+ "fi; " \ -+ "setenv bootargs ${bootargs} ${fbmem}\0" \ -+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=mmc dev ${mmcdev}; " \ -+ "if mmc rescan; then " \ -+ "echo SD/MMC found on device ${mmcdev};" \ -+ "setenv bootpart ${mmcdev}:1; " \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi; " \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "if run loadfdt; then " \ -+ "run mmcargs;" \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "else " \ -+ "echo Kernel found, but no device tree found;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ -@@ -161,10 +208,10 @@ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ -- "${get_cmd} ${image}; " \ -+ "${get_cmd} ${bootfile}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ -@@ -177,16 +224,7 @@ - "fi;\0" - - #define CONFIG_BOOTCOMMAND \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadimage; then " \ -- "run mmcboot; " \ -- "else run netboot; " \ -- "fi; " \ -- "fi; " \ -- "else run netboot; fi" -+ "run mmcboot;" - - /* Miscellaneous configurable options */ - #define CONFIG_SYS_LONGHELP -@@ -227,6 +265,7 @@ - - #define CONFIG_OF_LIBFDT - #define CONFIG_CMD_BOOTZ -+#define CONFIG_SUPPORT_RAW_INITRD - - #ifndef CONFIG_SYS_DCACHE_OFF - #define CONFIG_CMD_CACHE -diff -Nur u-boot-2015.01.orig/include/configs/udoo.h.orig u-boot-2015.01/include/configs/udoo.h.orig ---- u-boot-2015.01.orig/include/configs/udoo.h.orig 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/include/configs/udoo.h.orig 2015-01-12 12:39:08.000000000 -0200 -@@ -0,0 +1,235 @@ -+/* -+ * Copyright (C) 2013 Freescale Semiconductor, Inc. -+ * -+ * Configuration settings for Udoo board. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+#include "mx6_common.h" -+#include <asm/arch/imx-regs.h> -+#include <asm/imx-common/gpio.h> -+#include <linux/sizes.h> -+ -+#define CONFIG_MX6 -+#define CONFIG_DISPLAY_CPUINFO -+#define CONFIG_DISPLAY_BOARDINFO -+ -+#define MACH_TYPE_UDOO 4800 -+#define CONFIG_MACH_TYPE MACH_TYPE_UDOO -+ -+#define CONFIG_CMDLINE_TAG -+#define CONFIG_SETUP_MEMORY_TAGS -+#define CONFIG_INITRD_TAG -+#define CONFIG_REVISION_TAG -+ -+#define CONFIG_SYS_GENERIC_BOARD -+ -+/* Size of malloc() pool */ -+#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M) -+ -+#define CONFIG_BOARD_EARLY_INIT_F -+#define CONFIG_MXC_GPIO -+ -+#define CONFIG_MXC_UART -+#define CONFIG_MXC_UART_BASE UART2_BASE -+ -+/* SATA Configs */ -+ -+#define CONFIG_CMD_SATA -+#ifdef CONFIG_CMD_SATA -+#define CONFIG_DWC_AHSATA -+#define CONFIG_SYS_SATA_MAX_DEVICE 1 -+#define CONFIG_DWC_AHSATA_PORT_ID 0 -+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -+#define CONFIG_LBA48 -+#define CONFIG_LIBATA -+#endif -+ -+/* Network support */ -+ -+#define CONFIG_CMD_PING -+#define CONFIG_CMD_DHCP -+#define CONFIG_CMD_MII -+#define CONFIG_CMD_NET -+#define CONFIG_FEC_MXC -+#define CONFIG_MII -+#define IMX_FEC_BASE ENET_BASE_ADDR -+#define CONFIG_FEC_XCV_TYPE RGMII -+#define CONFIG_ETHPRIME "FEC" -+#define CONFIG_FEC_MXC_PHYADDR 6 -+#define CONFIG_PHYLIB -+#define CONFIG_PHY_MICREL -+#define CONFIG_PHY_MICREL_KSZ9031 -+ -+/* allow to overwrite serial and ethaddr */ -+#define CONFIG_ENV_OVERWRITE -+#define CONFIG_CONS_INDEX 1 -+#define CONFIG_BAUDRATE 115200 -+ -+/* Command definition */ -+#include <config_cmd_default.h> -+ -+#undef CONFIG_CMD_IMLS -+ -+#define CONFIG_CMD_BMODE -+#define CONFIG_CMD_SETEXPR -+ -+#define CONFIG_BOOTDELAY 3 -+ -+#define CONFIG_SYS_MEMTEST_START 0x10000000 -+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) -+#define CONFIG_LOADADDR 0x12000000 -+#define CONFIG_SYS_TEXT_BASE 0x17800000 -+ -+/* MMC Configuration */ -+#define CONFIG_FSL_ESDHC -+#define CONFIG_FSL_USDHC -+#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -+ -+#define CONFIG_MMC -+#define CONFIG_CMD_MMC -+#define CONFIG_GENERIC_MMC -+#define CONFIG_BOUNCE_BUFFER -+#define CONFIG_CMD_EXT2 -+#define CONFIG_CMD_FAT -+#define CONFIG_DOS_PARTITION -+ -+#define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" -+ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "script=boot.scr\0" \ -+ "image=zImage\0" \ -+ "console=ttymxc1\0" \ -+ "splashpos=m,m\0" \ -+ "fdt_high=0xffffffff\0" \ -+ "initrd_high=0xffffffff\0" \ -+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ -+ "fdt_addr=0x18000000\0" \ -+ "boot_fdt=try\0" \ -+ "ip_dyn=yes\0" \ -+ "mmcdev=0\0" \ -+ "mmcpart=1\0" \ -+ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ -+ "update_sd_firmware_filename=u-boot.imx\0" \ -+ "update_sd_firmware=" \ -+ "if test ${ip_dyn} = yes; then " \ -+ "setenv get_cmd dhcp; " \ -+ "else " \ -+ "setenv get_cmd tftp; " \ -+ "fi; " \ -+ "if mmc dev ${mmcdev}; then " \ -+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \ -+ "setexpr fw_sz ${filesize} / 0x200; " \ -+ "setexpr fw_sz ${fw_sz} + 1; " \ -+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ -+ "fi; " \ -+ "fi\0" \ -+ "mmcargs=setenv bootargs console=${console},${baudrate} " \ -+ "root=${mmcroot}\0" \ -+ "loadbootscript=" \ -+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ -+ "bootscript=echo Running bootscript from mmc ...; " \ -+ "source\0" \ -+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ -+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ -+ "mmcboot=echo Booting from mmc ...; " \ -+ "run mmcargs; " \ -+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -+ "if run loadfdt; then " \ -+ "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "else " \ -+ "if test ${boot_fdt} = try; then " \ -+ "bootz; " \ -+ "else " \ -+ "echo WARN: Cannot load the DT; " \ -+ "fi; " \ -+ "fi; " \ -+ "else " \ -+ "bootz; " \ -+ "fi;\0" \ -+ "netargs=setenv bootargs console=${console},${baudrate} " \ -+ "root=/dev/nfs " \ -+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ -+ "netboot=echo Booting from net ...; " \ -+ "run netargs; " \ -+ "if test ${ip_dyn} = yes; then " \ -+ "setenv get_cmd dhcp; " \ -+ "else " \ -+ "setenv get_cmd tftp; " \ -+ "fi; " \ -+ "${get_cmd} ${image}; " \ -+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ -+ "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "else " \ -+ "if test ${boot_fdt} = try; then " \ -+ "bootz; " \ -+ "else " \ -+ "echo WARN: Cannot load the DT; " \ -+ "fi; " \ -+ "fi; " \ -+ "else " \ -+ "bootz; " \ -+ "fi;\0" -+ -+#define CONFIG_BOOTCOMMAND \ -+ "mmc dev ${mmcdev}; if mmc rescan; then " \ -+ "if run loadbootscript; then " \ -+ "run bootscript; " \ -+ "else " \ -+ "if run loadimage; then " \ -+ "run mmcboot; " \ -+ "else run netboot; " \ -+ "fi; " \ -+ "fi; " \ -+ "else run netboot; fi" -+ -+/* Miscellaneous configurable options */ -+#define CONFIG_SYS_LONGHELP -+#define CONFIG_SYS_HUSH_PARSER -+#define CONFIG_AUTO_COMPLETE -+#define CONFIG_SYS_CBSIZE 256 -+ -+/* Print Buffer Size */ -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -+#define CONFIG_SYS_MAXARGS 16 -+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -+ -+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -+ -+#define CONFIG_CMDLINE_EDITING -+ -+/* Physical Memory Map */ -+#define CONFIG_NR_DRAM_BANKS 1 -+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -+ -+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -+ -+#define CONFIG_SYS_INIT_SP_OFFSET \ -+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -+#define CONFIG_SYS_INIT_SP_ADDR \ -+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -+ -+/* FLASH and environment organization */ -+#define CONFIG_SYS_NO_FLASH -+ -+#define CONFIG_ENV_SIZE (8 * 1024) -+ -+#define CONFIG_ENV_IS_IN_MMC -+#define CONFIG_ENV_OFFSET (6 * 64 * 1024) -+#define CONFIG_SYS_MMC_ENV_DEV 0 -+ -+#define CONFIG_OF_LIBFDT -+#define CONFIG_CMD_BOOTZ -+ -+#ifndef CONFIG_SYS_DCACHE_OFF -+#define CONFIG_CMD_CACHE -+#endif -+ -+#endif /* __CONFIG_H * */ diff --git a/libre-testing/uboot-udoo/PKGBUILD b/libre-testing/uboot-udoo/PKGBUILD index 03f554e46..4765a2473 100644 --- a/libre-testing/uboot-udoo/PKGBUILD +++ b/libre-testing/uboot-udoo/PKGBUILD @@ -6,7 +6,7 @@ buildarch=4 pkgbase=uboot-udoo pkgname=('uboot-udoo_dl' 'uboot-udoo_quad') pkgver=2015.01 -pkgrel=1 +pkgrel=2 arch=('armv7h') url="http://git.denx.de/u-boot.git/" license=('GPL') @@ -17,7 +17,7 @@ source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" '0002-kernel-add-support-for-gcc-5.patch' 'extlinux.conf') md5sums=('7f08dc9e98a71652bd6968888ed6ec95' - '9ed11143b9f54b560bf503df3b721899' + '70ccab6e449dbd232d5ff97a7fd17f95' '721a46867e189d8dedc6b6f86a536a34' 'e05d2d41a1bdbbd5d6fec02534784dcd') |