summaryrefslogtreecommitdiff
path: root/libre-testing
diff options
context:
space:
mode:
Diffstat (limited to 'libre-testing')
-rw-r--r--libre-testing/uboot-am335x_bone/0001-parabola-arm-modifications.patch232
-rw-r--r--libre-testing/uboot-am335x_bone/PKGBUILD47
-rw-r--r--libre-testing/uboot-am335x_bone/extlinux.conf34
-rw-r--r--libre-testing/uboot-am335x_bone/uEnv.txt1
-rw-r--r--libre-testing/uboot-am335x_bone/uboot-am335x_bone.install32
5 files changed, 346 insertions, 0 deletions
diff --git a/libre-testing/uboot-am335x_bone/0001-parabola-arm-modifications.patch b/libre-testing/uboot-am335x_bone/0001-parabola-arm-modifications.patch
new file mode 100644
index 000000000..062ec61c3
--- /dev/null
+++ b/libre-testing/uboot-am335x_bone/0001-parabola-arm-modifications.patch
@@ -0,0 +1,232 @@
+diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig
+--- u-boot-2015.04.orig/configs/am335x_evm_defconfig 2015-04-13 11:53:03.000000000 -0300
++++ u-boot-2015.04/configs/am335x_evm_defconfig 2016-02-21 22:12:00.228331339 -0300
+@@ -1,7 +1,6 @@
+ CONFIG_SPL=y
+ CONFIG_SPL_STACK_R=y
+ CONFIG_SPL_STACK_R_ADDR=0x82000000
+-CONFIG_SYS_EXTRA_OPTIONS="NAND"
+-CONFIG_CONS_INDEX=1
++CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
+ CONFIG_ARM=y
+ CONFIG_TARGET_AM335X_EVM=y
+diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h
+--- u-boot-2015.04.orig/include/configs/am335x_evm.h 2015-04-13 11:53:03.000000000 -0300
++++ u-boot-2015.04/include/configs/am335x_evm.h 2016-02-21 22:49:46.009920163 -0300
+@@ -17,6 +17,7 @@
+ #define __CONFIG_AM335X_EVM_H
+
+ #include <configs/ti_am335x_common.h>
++#define CONFIG_ENV_IS_NOWHERE
+
+ #ifndef CONFIG_SPL_BUILD
+ #ifndef CONFIG_FIT
+@@ -45,6 +46,9 @@
+ /* Enhance our eMMC support / experience. */
+ #define CONFIG_CMD_GPT
+ #define CONFIG_EFI_PARTITION
++#define CONFIG_CMD_PART
++#define CONFIG_PARTITION_UUIDS
++#define CONFIG_CMD_SETEXPR
+
+ #ifdef CONFIG_NAND
+ #define NANDARGS \
+@@ -67,130 +71,80 @@
+
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
++/* Enable extlinux boot support */
++#define CONFIG_CMD_PXE
++#define CONFIG_MENU
++#define BOOT_TARGET_DEVICES(func)
++#include <config_distro_bootcmd.h>
++
++/*
++ * 512M RAM (512M minimum minus space for the framebuffer),
++ * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
++ * 1M script, 1M pxe and the ramdisk at the end.
++ */
++#define MEM_LAYOUT_ENV_SETTINGS \
++ "bootm_size=0x10000000\0" \
++ "kernel_addr_r=0x82000000\0" \
++ "fdt_addr_r=0x88000000\0" \
++ "scriptaddr=0x43100000\0" \
++ "pxefile_addr_r=0x43200000\0" \
++ "ramdisk_addr_r=0x88080000\0"
++
+ #ifndef CONFIG_SPL_BUILD
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
+- "boot_fdt=try\0" \
+- "bootpart=0:2\0" \
++ MEM_LAYOUT_ENV_SETTINGS \
++ "bootpart=0:1\0" \
+ "bootdir=/boot\0" \
+- "bootfile=zImage\0" \
+- "fdtfile=undefined\0" \
+ "console=ttyO0,115200n8\0" \
+ "partitions=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ "optargs=\0" \
+- "mmcdev=0\0" \
+- "mmcroot=/dev/mmcblk0p2 ro\0" \
+- "mmcrootfstype=ext4 rootwait\0" \
+- "rootpath=/export/rootfs\0" \
+- "nfsopts=nolock\0" \
+- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
+- "::off\0" \
+- "ramroot=/dev/ram0 rw\0" \
+- "ramrootfstype=ext2\0" \
++ "cape_disable=\0" \
++ "cape_enable=\0" \
++ "cmdline=\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+- "root=${mmcroot} " \
+- "rootfstype=${mmcrootfstype}\0" \
+- "spiroot=/dev/mtdblock4 rw\0" \
+- "spirootfstype=jffs2\0" \
+- "spisrcaddr=0xe0000\0" \
+- "spiimgsize=0x362000\0" \
+- "spibusno=0\0" \
+- "spiargs=setenv bootargs console=${console} " \
+- "${optargs} " \
+- "root=${spiroot} " \
+- "rootfstype=${spirootfstype}\0" \
+- "netargs=setenv bootargs console=${console} " \
+- "${optargs} " \
+- "root=/dev/nfs " \
+- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+- "ip=dhcp\0" \
+- "bootenv=uEnv.txt\0" \
+- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+- "source ${loadaddr}\0" \
+- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+- "importbootenv=echo Importing environment from mmc ...; " \
+- "env import -t -r $loadaddr $filesize\0" \
+- "ramargs=setenv bootargs console=${console} " \
+- "${optargs} " \
+- "root=${ramroot} " \
+- "rootfstype=${ramrootfstype}\0" \
+- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+- "mmcloados=run mmcargs; " \
+- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+- "if run loadfdt; then " \
+- "bootz ${loadaddr} - ${fdtaddr}; " \
+- "else " \
+- "if test ${boot_fdt} = try; then " \
+- "bootz; " \
+- "else " \
+- "echo WARN: Cannot load the DT; " \
+- "fi; " \
+- "fi; " \
+- "else " \
+- "bootz; " \
+- "fi;\0" \
+- "mmcboot=mmc dev ${mmcdev}; " \
+- "if mmc rescan; then " \
+- "echo SD/MMC found on device ${mmcdev};" \
+- "if run loadbootscript; then " \
+- "run bootscript;" \
+- "else " \
+- "if run loadbootenv; then " \
+- "echo Loaded environment from ${bootenv};" \
+- "run importbootenv;" \
+- "fi;" \
+- "if test -n $uenvcmd; then " \
+- "echo Running uenvcmd ...;" \
+- "run uenvcmd;" \
++ "${cape_disable} " \
++ "${cape_enable} " \
++ "root=${root} " \
++ "${cmdline}\0" \
++ "mmcboot=usb start;" \
++ "for devtype in mmc usb; do " \
++ "for devnum in 0 1; do " \
++ "if ${devtype} dev ${devnum}; then " \
++ "echo ${devtype} found on device ${devnum};" \
++ "setenv bootpart ${devnum}:1;" \
++ "part uuid ${devtype} ${bootpart} uuid;" \
++ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \
++ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
++ "gpio set 54;" \
++ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
++ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
++ "env import -t ${loadaddr} ${filesize};" \
++ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
++ "echo Checking if uenvcmd is set ...;" \
++ "if test -n ${uenvcmd}; then " \
++ "echo Running uenvcmd ...;" \
++ "run uenvcmd;" \
++ "fi;" \
++ "fi;" \
++ "gpio set 55;" \
++ "run scan_dev_for_boot;" \
++ "gpio clear 54; gpio clear 55;" \
++ "setexpr devnum ${devnum} + 1;" \
+ "fi;" \
+- "if run loadimage; then " \
+- "run mmcloados;" \
+- "fi;" \
+- "fi ;" \
+- "fi;\0" \
+- "spiboot=echo Booting from spi ...; " \
+- "run spiargs; " \
+- "sf probe ${spibusno}:0; " \
+- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
+- "bootz ${loadaddr}\0" \
+- "netboot=echo Booting from network ...; " \
+- "setenv autoload no; " \
+- "dhcp; " \
+- "tftp ${loadaddr} ${bootfile}; " \
+- "tftp ${fdtaddr} ${fdtfile}; " \
+- "run netargs; " \
+- "bootz ${loadaddr} - ${fdtaddr}\0" \
+- "ramboot=echo Booting from ramdisk ...; " \
+- "run ramargs; " \
+- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+- "findfdt="\
+- "if test $board_name = A335BONE; then " \
+- "setenv fdtfile am335x-bone.dtb; fi; " \
+- "if test $board_name = A335BNLT; then " \
+- "setenv fdtfile am335x-boneblack.dtb; fi; " \
+- "if test $board_name = A33515BB; then " \
+- "setenv fdtfile am335x-evm.dtb; fi; " \
+- "if test $board_name = A335X_SK; then " \
+- "setenv fdtfile am335x-evmsk.dtb; fi; " \
+- "if test $fdtfile = undefined; then " \
+- "echo WARNING: Could not determine device tree to use; fi; \0" \
++ "done;" \
++ "done;\0" \
+ NANDARGS \
+ DFUARGS
+ #endif
+
+ #define CONFIG_BOOTCOMMAND \
+- "run findfdt; " \
+- "run mmcboot;" \
+- "setenv mmcdev 1; " \
+- "setenv bootpart 1:2; " \
++ "gpio set 53;" \
+ "run mmcboot;" \
+- "run nandboot;"
++ "gpio clear 54; gpio clear 55;"
+
+ /* NS16550 Configuration */
+ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
+@@ -329,9 +283,8 @@
+ #endif
+
+ #ifdef CONFIG_MUSB_GADGET
+-#define CONFIG_USB_ETHER
+-#define CONFIG_USB_ETH_RNDIS
+-#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
++#define CONFIG_CMD_USB_MASS_STORAGE
++#define CONFIG_USB_GADGET_MASS_STORAGE
+
+ /* USB TI's IDs */
+ #define CONFIG_G_DNL_VENDOR_NUM 0x0451
diff --git a/libre-testing/uboot-am335x_bone/PKGBUILD b/libre-testing/uboot-am335x_bone/PKGBUILD
new file mode 100644
index 000000000..bfce9b132
--- /dev/null
+++ b/libre-testing/uboot-am335x_bone/PKGBUILD
@@ -0,0 +1,47 @@
+# U-Boot: BeagleBone and BeagleBone Black
+# Maintainer: André Silva <emulatorman@parabola.nu>
+
+buildarch=4
+
+pkgname=uboot-am335x_bone
+pkgver=2015.04
+pkgrel=1
+pkgdesc="U-Boot for Beaglebone and Beaglebone Black"
+arch=('armv7h')
+url="http://git.denx.de/u-boot.git/"
+replaces=('uboot-beaglebone')
+conflicts=('uboot-beaglebone')
+provides=('uboot-beaglebone')
+makedepends=('bc')
+license=('GPL')
+install=${pkgname}.install
+source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
+ '0001-parabola-arm-modifications.patch'
+ 'extlinux.conf'
+ 'uEnv.txt')
+md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
+ '4f4078a4d5558a56a9144b7e8ed94fb5'
+ '9bf446920d4344d17eb0673b7a49701a'
+ 'ccb79775b81654e16fca18825c7f2506')
+
+prepare() {
+ cd u-boot-${pkgver}
+ patch -Np1 -i ../0001-parabola-arm-modifications.patch
+}
+
+build() {
+ cd u-boot-${pkgver}
+
+ unset CFLAGS CXXFLAGS LDFLAGS
+
+ make distclean
+ make am335x_evm_config
+ make
+}
+
+package() {
+ cd u-boot-${pkgver}
+ mkdir -p "${pkgdir}"/boot/extlinux
+ cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
+ cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
+}
diff --git a/libre-testing/uboot-am335x_bone/extlinux.conf b/libre-testing/uboot-am335x_bone/extlinux.conf
new file mode 100644
index 000000000..0273d81c3
--- /dev/null
+++ b/libre-testing/uboot-am335x_bone/extlinux.conf
@@ -0,0 +1,34 @@
+# Config file
+# /boot/extlinux/extlinux.conf
+
+DEFAULT parabola-boneblack
+TIMEOUT 500
+
+# Menu Configuration
+UI menu.c32
+
+# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
+MENU TITLE Parabola GNU/Linux-libre
+MENU COLOR border 35;40 #ff777caa #a0000000 std
+MENU COLOR title 1;35;40 #ff777caa #a0000000 std
+MENU COLOR sel 7;35;47 #e0ffffff #20777caa all
+MENU COLOR unsel 35;40 #ff777caa #a0000000 std
+MENU COLOR help 35;40 #c0b2b2b2 #a0000000 std
+MENU COLOR timeout_msg 35;40 #ff777caa #00000000 std
+MENU COLOR timeout 1;35;40 #ff777caa #00000000 std
+MENU COLOR msg07 35;40 #ff777caa #a0000000 std
+MENU COLOR tabmsg 35;40 #ff777caa #00000000 std
+
+# Boot sections
+
+LABEL parabola-bone
+ MENU LABEL Parabola GNU/Linux-libre w/ linux-libre kernel for BeagleBone
+ LINUX /boot/vmlinuz-linux-libre
+ APPEND console=ttyO0,115200n8 console=tty1 loglevel=8 rootwait rw earlyprintk root=/dev/mmcblk0p1
+ FDTDIR /boot/dtbs/linux-libre/am335x-bone.dtb
+
+LABEL parabola-boneblack
+ MENU LABEL Parabola GNU/Linux-libre w/ linux-libre kernel for BeagleBone Black
+ LINUX /boot/vmlinuz-linux-libre
+ APPEND console=ttyO0,115200n8 console=tty1 loglevel=8 rootwait rw earlyprintk root=/dev/mmcblk0p1
+ FDTDIR /boot/dtbs/linux-libre/am335x-boneblack.dtb
diff --git a/libre-testing/uboot-am335x_bone/uEnv.txt b/libre-testing/uboot-am335x_bone/uEnv.txt
new file mode 100644
index 000000000..f432efc6b
--- /dev/null
+++ b/libre-testing/uboot-am335x_bone/uEnv.txt
@@ -0,0 +1 @@
+optargs=coherent_pool=1M
diff --git a/libre-testing/uboot-am335x_bone/uboot-am335x_bone.install b/libre-testing/uboot-am335x_bone/uboot-am335x_bone.install
new file mode 100644
index 000000000..24ccc1acb
--- /dev/null
+++ b/libre-testing/uboot-am335x_bone/uboot-am335x_bone.install
@@ -0,0 +1,32 @@
+flash_instructions() {
+ echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
+ echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
+}
+
+flash_uboot() {
+ root=$(mount | awk '/ on \/ / { print $1; }')
+ if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
+ root=${root:0:12}
+ echo "A new U-Boot version needs to be flashed onto $root."
+ echo "Do this now? [y|N]"
+ read -r shouldwe
+ if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
+ dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
+ dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
+ else
+ echo "You can do this later by running:"
+ flash_instructions
+ fi
+ else
+ echo "Flash the new U-Boot version onto your boot device. For example:"
+ flash_instructions
+ fi
+}
+
+post_install() {
+ flash_uboot
+}
+
+post_upgrade() {
+ flash_uboot
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 05:31:26 +0000