summaryrefslogtreecommitdiff
path: root/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install
diff options
context:
space:
mode:
Diffstat (limited to 'libre-testing/kernel26-libre-lts/kernel26-libre-lts.install')
-rw-r--r--libre-testing/kernel26-libre-lts/kernel26-libre-lts.install147
1 files changed, 147 insertions, 0 deletions
diff --git a/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install b/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install
new file mode 100644
index 000000000..c3249445a
--- /dev/null
+++ b/libre-testing/kernel26-libre-lts/kernel26-libre-lts.install
@@ -0,0 +1,147 @@
+# arg 1: the new package version
+# arg 2: the old package version
+
+KERNEL_NAME=-lts
+KERNEL_VERSION=2.6.32-lts
+
+post_install () {
+ # updating module dependencies
+ echo ">>> Updating module dependencies. Please wait ..."
+ depmod $KERNEL_VERSION
+ # generate init ramdisks
+ echo ">>> MKINITCPIO SETUP"
+ echo ">>> ----------------"
+ echo ">>> If you use LVM2, Encrypted root or software RAID,"
+ echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
+ echo ">>> More information about mkinitcpio setup can be found here:"
+ echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
+ echo ""
+ echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
+ /sbin/mkinitcpio -p kernel26${KERNEL_NAME}
+}
+
+post_upgrade() {
+ pacman -Q grub &>/dev/null
+ hasgrub=$?
+ pacman -Q grub2 &>/dev/null
+ hasgrub2=$?
+ pacman -Q lilo &>/dev/null
+ haslilo=$?
+ # reminder notices
+ if [ $haslilo -eq 0 ]; then
+ echo ">>>"
+ if [ $hasgrub -eq 0 -o $hasgrub2 -eq 0 ]; then
+ echo ">>> If you use the LILO bootloader, you should run 'lilo' before rebooting."
+ else
+ echo ">>> You appear to be using the LILO bootloader. You should run"
+ echo ">>> 'lilo' before rebooting."
+ fi
+ echo ">>>"
+ fi
+
+ if grep "/boot" /etc/fstab 2>&1 >/dev/null; then
+ if ! grep "/boot" /etc/mtab 2>&1 >/dev/null; then
+ echo "WARNING: /boot appears to be a seperate partition but is not mounted"
+ echo " This is most likely not what you want. Please mount your /boot"
+ echo " partition and reinstall the kernel unless you are sure this is OK"
+ fi
+ fi
+
+ if [ "`vercmp $2 2.6.13`" -lt 0 ]; then
+ # important upgrade notice
+ echo ">>>"
+ echo ">>> IMPORTANT KERNEL UPGRADE NOTICE"
+ echo ">>> -------------------------------"
+ echo ">>> As of kernel 2.6.13, DevFS is NO LONGER AVAILABLE!"
+ echo ">>> If you still use DevFS, please make the transition to uDev before"
+ echo ">>> rebooting. If you really need to stay with DevFS for some reason,"
+ echo ">>> then you can manually downgrade to an older version:"
+ echo ">>>"
+ echo ">>> # pacman -U http://archlinux.org/~judd/kernel/kernel26-scsi-2.6.12.2-1.pkg.tar.gz"
+ echo ">>>"
+ echo ">>> If you choose to downgrade, don't forget to add kernel26-scsi to your"
+ echo ">>> IgnorePkg list in /etc/pacman.conf"
+ echo ">>>"
+ echo ">>> (NOTE: The following portion applies to uDev users as well!)"
+ echo ">>>"
+ echo ">>> If you use any DevFS paths in your GRUB menu.lst, then you will not"
+ echo ">>> be able to boot! Change your root= parameter to use the classic"
+ echo ">>> naming scheme."
+ echo ">>>"
+ echo ">>> EXAMPLES:"
+ echo ">>> - change root=/dev/discs/disc0/part3 to root=/dev/sda3"
+ echo ">>> - change root=/dev/md/0 to root=/dev/md0"
+ echo ">>>"
+ fi
+ # generate new init ramdisk
+ if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
+ echo ">>> --------------------------------------------------------------"
+ echo ">>> | WARNING: |"
+ echo ">>> |mkinitrd is not supported anymore in kernel >=2.6.18 series!|"
+ echo ">>> | Please change to Mkinitcpio setup. |"
+ echo ">>> --------------------------------------------------------------"
+ echo ">>>"
+ fi
+ # updating module dependencies
+ echo ">>> Updating module dependencies. Please wait ..."
+ depmod $KERNEL_VERSION
+ echo ">>> MKINITCPIO SETUP"
+ echo ">>> ----------------"
+ if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
+ echo ">>> Please change your bootloader config files:"
+ echo ">>> Grub: /boot/grub/menu.lst | Lilo: /etc/lilo.conf"
+ echo "------------------------------------------------"
+ echo "| - initrd26.img to kernel26${KERNEL_NAME}.img |"
+ echo "| - initrd26-full.img to kernel26${KERNEL_NAME}-fallback.img |"
+ echo "------------------------------------------------"
+ fi
+ if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
+ echo ""
+ echo ">>> New PATA/IDE subsystem - EXPERIMENTAL"
+ echo ">>> ----------"
+ echo ">>> To use the new pata drivers, change the 'ide' hook "
+ echo ">>> to 'pata' in /etc/mkinicpio.conf HOOKS="
+ echo ">>> The new system changes: /dev/hd? to /dev/sd?"
+ echo ">>> Don't forget to modify GRUB, LILO and fstab to the"
+ echo ">>> new naming system. "
+ echo ">>> eg: hda3 --> sda3, hdc8 --> sdc8"
+ echo ""
+ echo ">>> piix/ata_piix (Intel chipsets) - IMPORTANT"
+ echo "----------"
+ echo ">>> If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf"
+ echo ">>> the 'ata_piix' module will be used."
+ echo ">>> This may cause your devices to shift names, eg:"
+ echo ">>> - IDE: devices from hd? to sd?"
+ echo ">>> - SATA: sda might shift to sdc if you have 2 other disks on a PIIX IDE port."
+ echo ">>> To check if this will affect you, check 'mkinitcpio -M' for piix/ata_piix"
+ echo ""
+ fi
+
+ echo ">>> If you use LVM2, Encrypted root or software RAID,"
+ echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
+ echo ">>> More information about mkinitcpio setup can be found here:"
+ echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
+ echo ""
+ echo ">>> Generating initial ramdisk, using mkinitcpio. Please wait..."
+if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
+ /sbin/mkinitcpio -p kernel26${KERNEL_NAME} -m "ATTENTION:\nIf you get a kernel panic below
+and are using an Intel chipset, append 'earlymodules=piix' to the
+kernel commandline"
+else
+ /sbin/mkinitcpio -p kernel26${KERNEL_NAME}
+fi
+if [ "`vercmp $2 2.6.21`" -lt 0 ]; then
+ echo ""
+ echo "Important ACPI Information:"
+ echo ">>> Since 2.6.20.7 all possible ACPI parts are modularized."
+ echo ">>> The modules are located at:"
+ echo ">>> /lib/modules/$(uname -r)/kernel/drivers/acpi"
+ echo ">>> For more information about ACPI modules check this wiki page:"
+ echo ">>> 'http://wiki.archlinux.org/index.php/ACPI_modules'"
+fi
+}
+
+post_remove() {
+ rm -f /boot/kernel26${KERNEL_NAME}.img
+ rm -f /boot/kernel26${KERNEL_NAME}-fallback.img
+}