summaryrefslogtreecommitdiff
path: root/kernels
diff options
context:
space:
mode:
Diffstat (limited to 'kernels')
-rw-r--r--kernels/linux-libre-xen/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch6
-rw-r--r--kernels/linux-libre-xen/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch8
-rw-r--r--kernels/linux-libre-xen/0003-SMILE-Plug-device-tree-file.patch10
-rw-r--r--kernels/linux-libre-xen/0004-fix-mvsdio-eMMC-timing.patch6
-rw-r--r--kernels/linux-libre-xen/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch13
-rw-r--r--kernels/linux-libre-xen/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch8
-rw-r--r--kernels/linux-libre-xen/0007-set-default-cubietruck-led-triggers.patch6
-rw-r--r--kernels/linux-libre-xen/0008-USB-armory-support.patch681
-rw-r--r--kernels/linux-libre-xen/0008-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch (renamed from kernels/linux-libre-xen/0010-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch)8
-rw-r--r--kernels/linux-libre-xen/0009-ARM-dts-imx6ul-pico-hobbit-Add-Wifi-support.patch63
-rw-r--r--kernels/linux-libre-xen/0011-usb-musb-Call-pm_runtime-from-musb_gadget_queue.patch56
-rw-r--r--kernels/linux-libre-xen/0012-phy-twl4030-usb-better-handle-musb_mailbox-failure.patch62
-rw-r--r--kernels/linux-libre-xen/0013-Revert-gpu-drm-omapdrm-dss-of-add-missing-of_node_pu.patch38
-rw-r--r--kernels/linux-libre-xen/PKGBUILD54
-rw-r--r--kernels/linux-libre-xen/config.armv7h330
-rw-r--r--kernels/linux-libre-xen/config.i686390
-rw-r--r--kernels/linux-libre-xen/net_handle_no_dst_on_skb_in_icmp6_send.patch68
17 files changed, 447 insertions, 1360 deletions
diff --git a/kernels/linux-libre-xen/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch b/kernels/linux-libre-xen/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch
index c4e315141..7ab3b23d7 100644
--- a/kernels/linux-libre-xen/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch
+++ b/kernels/linux-libre-xen/0001-ARM-atags-add-support-for-Marvell-s-u-boot.patch
@@ -1,7 +1,7 @@
-From 3a71f920fb71aaf3c8a74a73d5bba925752e8390 Mon Sep 17 00:00:00 2001
+From 001565916ddb8589ec7920b0d3c0d007225c79c4 Mon Sep 17 00:00:00 2001
From: Willy Tarreau <w@xxxxxx>
Date: Sun, 2 Dec 2012 19:59:28 +0100
-Subject: [PATCH 01/13] ARM: atags: add support for Marvell's u-boot
+Subject: [PATCH 1/8] ARM: atags: add support for Marvell's u-boot
Marvell uses a specific atag in its u-boot which includes among other
information the MAC addresses for up to 4 network interfaces.
@@ -47,5 +47,5 @@ index 979ff40..d1d0c19 100644
};
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch b/kernels/linux-libre-xen/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch
index 79d0dfb7e..719475bad 100644
--- a/kernels/linux-libre-xen/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch
+++ b/kernels/linux-libre-xen/0002-ARM-atags-fdt-retrieve-MAC-addresses-from-Marvell-bo.patch
@@ -1,8 +1,8 @@
-From f414d34637b5ffb6cf3e3b9849cd5cc584ef8f19 Mon Sep 17 00:00:00 2001
+From c25c95072f199e0d0a56cbd4db701ab5b36a9f0c Mon Sep 17 00:00:00 2001
From: Willy Tarreau <w@xxxxxx>
Date: Sun, 2 Dec 2012 19:56:58 +0100
-Subject: [PATCH 02/13] ARM: atags/fdt: retrieve MAC addresses from Marvell
- boot loader
+Subject: [PATCH 2/8] ARM: atags/fdt: retrieve MAC addresses from Marvell boot
+ loader
The atags are parsed and if a Marvell atag is found, up to 4 MAC
addresses are extracted there and assigned to node aliases eth0..3
@@ -43,5 +43,5 @@ index 9448aa0..ac7b6ae 100644
}
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0003-SMILE-Plug-device-tree-file.patch b/kernels/linux-libre-xen/0003-SMILE-Plug-device-tree-file.patch
index b52ebad33..b686a3298 100644
--- a/kernels/linux-libre-xen/0003-SMILE-Plug-device-tree-file.patch
+++ b/kernels/linux-libre-xen/0003-SMILE-Plug-device-tree-file.patch
@@ -1,7 +1,7 @@
-From 922440581e2bf77e75230b926ad5fe746327209a Mon Sep 17 00:00:00 2001
+From 3822d03ac84e6581583c3e533eb0e015334242bd Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Fri, 5 Sep 2014 15:41:19 -0600
-Subject: [PATCH 03/13] SMILE Plug device tree file
+Subject: [PATCH 3/8] SMILE Plug device tree file
This adds a dts file for the SMILE Plug, which only differs from the Mirabox
dts with the LED definitions.
@@ -14,10 +14,10 @@ Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index faacd52..b41e5b0 100644
+index befcd26..2be4c48 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -871,6 +871,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
+@@ -906,6 +906,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
armada-370-dlink-dns327l.dtb \
armada-370-mirabox.dtb \
@@ -205,5 +205,5 @@ index 0000000..d01308a
+ };
+};
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0004-fix-mvsdio-eMMC-timing.patch b/kernels/linux-libre-xen/0004-fix-mvsdio-eMMC-timing.patch
index 13910397d..050e8a0e5 100644
--- a/kernels/linux-libre-xen/0004-fix-mvsdio-eMMC-timing.patch
+++ b/kernels/linux-libre-xen/0004-fix-mvsdio-eMMC-timing.patch
@@ -1,7 +1,7 @@
-From edb8d8e73417db6941473734b9cfb673c7089f72 Mon Sep 17 00:00:00 2001
+From 51597a7978cb561ba33d2fe4f9fb3aa07f448cc4 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Fri, 5 Sep 2014 15:43:56 -0600
-Subject: [PATCH 04/13] fix mvsdio eMMC timing
+Subject: [PATCH 4/8] fix mvsdio eMMC timing
These changes from Globalscale change the MMC timing to allow the eMMC versions
of the Mirabox and SMILE Plug to work.
@@ -34,5 +34,5 @@ index 42296e5..e5ce6d2 100644
host->clock = ios->clock;
host->ns_per_clk = 1000000000 / (host->base_clock / (m+1));
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch b/kernels/linux-libre-xen/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch
index e89e6388e..09b889f59 100644
--- a/kernels/linux-libre-xen/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch
+++ b/kernels/linux-libre-xen/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch
@@ -1,15 +1,14 @@
-From a6b9bd0029d9453d4f59bc367f9a33e1a3285709 Mon Sep 17 00:00:00 2001
+From f0e29c8c8744317cfe946faf4f4ebae76f2c4eb1 Mon Sep 17 00:00:00 2001
From: popcornmix <popcornmix@gmail.com>
Date: Tue, 18 Feb 2014 01:43:50 -0300
-Subject: [PATCH 05/13] net/smsc95xx: Allow mac address to be set as a
- parameter
+Subject: [PATCH 5/8] net/smsc95xx: Allow mac address to be set as a parameter
---
drivers/net/usb/smsc95xx.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
-index dc989a8..912be75 100644
+index 831aa33..0362554 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -60,6 +60,7 @@
@@ -20,7 +19,7 @@ index dc989a8..912be75 100644
#define CARRIER_CHECK_DELAY (2 * HZ)
-@@ -80,6 +81,10 @@ static bool turbo_mode = true;
+@@ -82,6 +83,10 @@ static bool turbo_mode = true;
module_param(turbo_mode, bool, 0644);
MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
@@ -31,7 +30,7 @@ index dc989a8..912be75 100644
static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
u32 *data, int in_pm)
{
-@@ -809,8 +814,59 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+@@ -910,8 +915,59 @@ static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
@@ -92,5 +91,5 @@ index dc989a8..912be75 100644
/* maybe the boot loader passed the MAC address in devicetree */
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch b/kernels/linux-libre-xen/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch
index b310bdfc8..44e766b8d 100644
--- a/kernels/linux-libre-xen/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch
+++ b/kernels/linux-libre-xen/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch
@@ -1,7 +1,7 @@
-From 927b66f6154db0cf7eb5a6d016a1e53d742a8098 Mon Sep 17 00:00:00 2001
+From 200fab4de6f535e626095b9782b56e0ed101409c Mon Sep 17 00:00:00 2001
From: dobatog <dobatog@gmail.com>
Date: Thu, 26 Feb 2015 12:32:27 +0100
-Subject: [PATCH 06/13] ARM: TLV320AIC23 SoC Audio Codec: Fix errors reported
+Subject: [PATCH 6/8] ARM: TLV320AIC23 SoC Audio Codec: Fix errors reported
related to input routing signals.
The following patch, based on stable v3.19, corrects the errors that are reported in the boot trace in reference to the Input Signals of the audio codec TLV320AIC23:
@@ -27,7 +27,7 @@ Tested-by: Max Filippov <jcmvbkbc@gmail.com>
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
-index cd8c02b..95e6b11 100644
+index 410cae0..0bb8e26 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -174,10 +174,10 @@ static const struct snd_soc_dapm_route tlv320aic23_intercon[] = {
@@ -45,5 +45,5 @@ index cd8c02b..95e6b11 100644
/* input mux */
{"Capture Source", "Line", "Line Input"},
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0007-set-default-cubietruck-led-triggers.patch b/kernels/linux-libre-xen/0007-set-default-cubietruck-led-triggers.patch
index fcad9ed0a..7464f8281 100644
--- a/kernels/linux-libre-xen/0007-set-default-cubietruck-led-triggers.patch
+++ b/kernels/linux-libre-xen/0007-set-default-cubietruck-led-triggers.patch
@@ -1,7 +1,7 @@
-From 42885038fd78080edabbce377800994337fbc644 Mon Sep 17 00:00:00 2001
+From 011f5e6c9ef7350ac6e7bbd486318b1b96d78652 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Sat, 14 Feb 2015 12:32:27 +0100
-Subject: [PATCH 07/13] set default cubietruck led triggers
+Subject: [PATCH 7/8] set default cubietruck led triggers
Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
---
@@ -29,5 +29,5 @@ index 83f39b0..15e9626 100644
};
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0008-USB-armory-support.patch b/kernels/linux-libre-xen/0008-USB-armory-support.patch
deleted file mode 100644
index 6b99d160c..000000000
--- a/kernels/linux-libre-xen/0008-USB-armory-support.patch
+++ /dev/null
@@ -1,681 +0,0 @@
-From e603d79db1ce38be15a8b7d1514301a67d88f920 Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Sat, 7 Feb 2015 12:32:27 +0100
-Subject: [PATCH 08/13] USB armory support
-
----
- arch/arm/boot/dts/Makefile | 5 +
- arch/arm/boot/dts/imx53-usbarmory-common.dtsi | 286 ++++++++++++++++++++++++++
- arch/arm/boot/dts/imx53-usbarmory-gpio.dts | 62 ++++++
- arch/arm/boot/dts/imx53-usbarmory-host.dts | 54 +++++
- arch/arm/boot/dts/imx53-usbarmory-i2c.dts | 68 ++++++
- arch/arm/boot/dts/imx53-usbarmory-spi.dts | 81 ++++++++
- arch/arm/boot/dts/imx53-usbarmory.dts | 54 +++++
- 7 files changed, 610 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx53-usbarmory-common.dtsi
- create mode 100644 arch/arm/boot/dts/imx53-usbarmory-gpio.dts
- create mode 100644 arch/arm/boot/dts/imx53-usbarmory-host.dts
- create mode 100644 arch/arm/boot/dts/imx53-usbarmory-i2c.dts
- create mode 100644 arch/arm/boot/dts/imx53-usbarmory-spi.dts
- create mode 100644 arch/arm/boot/dts/imx53-usbarmory.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index b41e5b0..3ce4c32 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -315,6 +315,11 @@ dtb-$(CONFIG_SOC_IMX53) += \
- imx53-smd.dtb \
- imx53-tx53-x03x.dtb \
- imx53-tx53-x13x.dtb \
-+ imx53-usbarmory.dtb \
-+ imx53-usbarmory-gpio.dtb \
-+ imx53-usbarmory-host.dtb \
-+ imx53-usbarmory-i2c.dtb \
-+ imx53-usbarmory-spi.dtb \
- imx53-voipac-bsb.dtb
- dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-apf6dev.dtb \
-diff --git a/arch/arm/boot/dts/imx53-usbarmory-common.dtsi b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi
-new file mode 100644
-index 0000000..ab5d00a
---- /dev/null
-+++ b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi
-@@ -0,0 +1,286 @@
-+/*
-+ * USB armory MkI device tree include file
-+ * https://inversepath.com/usbarmory
-+ *
-+ * Copyright (C) 2015, Inverse Path
-+ * Andrej Rosano <andrej@inversepath.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "imx53.dtsi"
-+
-+/ {
-+ model = "Inverse Path USB armory";
-+ compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
-+};
-+
-+/ {
-+ chosen {
-+ stdout-path = &uart1;
-+ };
-+
-+ memory {
-+ reg = <0x70000000 0x20000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pin_gpio4_27>;
-+
-+ user {
-+ label = "LED";
-+ gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+ };
-+
-+ soc {
-+ aips@60000000 {
-+ scc2: scc2@63fb4000 {
-+ compatible = "fsl,imx53-scc2";
-+ reg = <0x63fb4000 0x4000>,
-+ <0x07000000 0x4000>;
-+ interrupts = <21 23>;
-+ };
-+ };
-+ };
-+};
-+
-+&cpu0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a8";
-+ reg = <0x0>;
-+ clocks = <&clks IMX5_CLK_ARM>;
-+ clock-latency = <61036>;
-+ voltage-tolerance = <5>;
-+ operating-points = <
-+ /* kHz */
-+ 166666 850000
-+ 400000 900000
-+ 800000 1050000
-+ >;
-+};
-+
-+&esdhc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_esdhc1>;
-+ status = "okay";
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+
-+ imx53-usbarmory {
-+ led_pin_gpio4_27: led_gpio4_27@0 {
-+ fsl,pins = <
-+ MX53_PAD_DISP0_DAT6__GPIO4_27 0x0
-+ >;
-+ };
-+
-+ pinctrl_esdhc1: esdhc1grp {
-+ fsl,pins = <
-+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
-+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
-+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
-+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
-+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
-+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
-+ >;
-+ };
-+
-+ pinctrl_i2c1_pmic: i2c1grp_pmic {
-+ fsl,pins = <
-+ MX53_PAD_EIM_D21__I2C1_SCL 0x0
-+ MX53_PAD_EIM_D28__I2C1_SDA 0x0
-+ >;
-+ };
-+
-+ /*
-+ UART mode pin header configration:
-+ pin number: 1 2 3 4 5 6 7
-+ function: GND 5V ? ? TX RX ?
-+ */
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
-+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
-+ >;
-+ };
-+
-+ /*
-+ GPIO mode pin header configuration:
-+ 1 2 3 4 5 6 7
-+ GND 5V GPIO5[26] GPIO5[27] GPIO5[28] GPIO5[29] GPIO5[30]
-+ */
-+ pinctrl_gpio5: gpio5grp {
-+ fsl,pins = <
-+ MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0
-+ MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0
-+ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0
-+ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0
-+ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0
-+ >;
-+ };
-+
-+ /*
-+ SPI mode pin header configuration:
-+ 1 2 3 4 5 6 7
-+ GND 5V SCLK MOSI MISO /SS0 /SS1
-+ */
-+ pinctrl_ecspi2: ecspi2grp {
-+ fsl,pins = <
-+ MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x0
-+ MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x0
-+ MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x0
-+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x0
-+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x0
-+ >;
-+ };
-+
-+ /*
-+ WILC1000 wifi module pin header configuration:
-+ 1 2 3 4 5 6 7
-+ GND 5V SCLK MOSI MISO /SS0 GPIO_IRQ
-+ */
-+ pinctrl_wilc1000: wilc1000grp {
-+ fsl,pins = <
-+ MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x0
-+ MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x0
-+ MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x0
-+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x0
-+ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0
-+ >;
-+ };
-+
-+ /*
-+ I2C mode pin header configuration:
-+ 1 2 3 4 5 6 7
-+ GND 5V SDA SCL GPIO5[28] GPIO5[29] GPIO5[30]
-+ */
-+ pinctrl_i2c1_pinheader: i2c1grp_pinheader {
-+ fsl,pins = <
-+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0x0
-+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x0
-+ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0
-+ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0
-+ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0
-+ >;
-+ };
-+ };
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ pinctrl-0 = <&pinctrl_i2c1_pmic>;
-+ status = "okay";
-+ ltc3589: pmic@34 {
-+ compatible = "lltc,ltc3589-2";
-+ reg = <0x34>;
-+ regulators {
-+ sw1_reg: sw1 {
-+ regulator-min-microvolt = <591930>;
-+ regulator-max-microvolt = <1224671>;
-+ lltc,fb-voltage-divider = <100000 158000>;
-+ regulator-ramp-delay = <7000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <704123>;
-+ regulator-max-microvolt = <1456803>;
-+ lltc,fb-voltage-divider = <180000 191000>;
-+ regulator-ramp-delay = <7000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: sw3 {
-+ regulator-min-microvolt = <1341250>;
-+ regulator-max-microvolt = <2775000>;
-+ lltc,fb-voltage-divider = <270000 100000>;
-+ regulator-ramp-delay = <7000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ bb_out_reg: bb-out {
-+ regulator-min-microvolt = <3387341>;
-+ regulator-max-microvolt = <3387341>;
-+ lltc,fb-voltage-divider = <511000 158000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+ ldo1_reg: ldo1 {
-+ regulator-min-microvolt = <1306329>;
-+ regulator-max-microvolt = <1306329>;
-+ lltc,fb-voltage-divider = <100000 158000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ldo2 {
-+ regulator-min-microvolt = <704123>;
-+ regulator-max-microvolt = <1456806>;
-+ lltc,fb-voltage-divider = <180000 191000>;
-+ regulator-ramp-delay = <7000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo3_reg: ldo3 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-boot-on;
-+ };
-+
-+ ldo4_reg: ldo4 {
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <3200000>;
-+ };
-+ };
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx53-usbarmory-gpio.dts b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts
-new file mode 100644
-index 0000000..8d54dd2
---- /dev/null
-+++ b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts
-@@ -0,0 +1,62 @@
-+/*
-+ * USB armory MkI device tree file
-+ * https://inversepath.com/usbarmory
-+ *
-+ * Copyright (C) 2015, Inverse Path
-+ * Andrej Rosano <andrej@inversepath.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx53-usbarmory-common.dtsi"
-+
-+&usbotg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&iomuxc {
-+ pinctrl-0 = <&pinctrl_gpio5>;
-+};
-+
-+&uart1 {
-+ status = "disabled";
-+};
-diff --git a/arch/arm/boot/dts/imx53-usbarmory-host.dts b/arch/arm/boot/dts/imx53-usbarmory-host.dts
-new file mode 100644
-index 0000000..d4e3b4c
---- /dev/null
-+++ b/arch/arm/boot/dts/imx53-usbarmory-host.dts
-@@ -0,0 +1,54 @@
-+/*
-+ * USB armory MkI device tree file
-+ * https://inversepath.com/usbarmory
-+ *
-+ * Copyright (C) 2015, Inverse Path
-+ * Andrej Rosano <andrej@inversepath.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx53-usbarmory-common.dtsi"
-+
-+&usbotg {
-+ dr_mode = "host";
-+ status = "okay";
-+};
-diff --git a/arch/arm/boot/dts/imx53-usbarmory-i2c.dts b/arch/arm/boot/dts/imx53-usbarmory-i2c.dts
-new file mode 100644
-index 0000000..158fbac
---- /dev/null
-+++ b/arch/arm/boot/dts/imx53-usbarmory-i2c.dts
-@@ -0,0 +1,68 @@
-+/*
-+ * USB armory MkI device tree file
-+ * https://inversepath.com/usbarmory
-+ *
-+ * Copyright (C) 2015, Inverse Path
-+ * Andrej Rosano <andrej@inversepath.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx53-usbarmory-common.dtsi"
-+
-+&usbotg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ status = "disabled";
-+};
-+
-+&iomuxc {
-+ pinctrl-0 = <&pinctrl_i2c1_pinheader>;
-+};
-+
-+&i2c1 {
-+ ltc3589: pmic@34 {
-+ status = "disabled";
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx53-usbarmory-spi.dts b/arch/arm/boot/dts/imx53-usbarmory-spi.dts
-new file mode 100644
-index 0000000..f26f7ec
---- /dev/null
-+++ b/arch/arm/boot/dts/imx53-usbarmory-spi.dts
-@@ -0,0 +1,81 @@
-+/*
-+ * USB armory MkI device tree file
-+ * https://inversepath.com/usbarmory
-+ *
-+ * Copyright (C) 2015, Inverse Path
-+ * Andrej Rosano <andrej@inversepath.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx53-usbarmory-common.dtsi"
-+
-+&usbotg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ status = "disabled";
-+};
-+
-+&iomuxc {
-+ pinctrl-0 = <&pinctrl_ecspi2>;
-+};
-+
-+&ecspi2 {
-+ fsl,spi-num-chipselects = <2>;
-+ cs-gpios = <&gpio5 29 0>, <&gpio5 30 0>;
-+ status = "okay";
-+
-+ flash: m25p40@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "st,m25p40", "st,m25p";
-+ spi-max-frequency = <20000000>;
-+ reg = <0>;
-+
-+ partition@0 {
-+ label = "test-partition";
-+ reg = <0x0 0x80000>;
-+ };
-+ };
-+};
-diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
-new file mode 100644
-index 0000000..33719f7
---- /dev/null
-+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
-@@ -0,0 +1,54 @@
-+/*
-+ * USB armory MkI device tree file
-+ * https://inversepath.com/usbarmory
-+ *
-+ * Copyright (C) 2015, Inverse Path
-+ * Andrej Rosano <andrej@inversepath.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx53-usbarmory-common.dtsi"
-+
-+&usbotg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
---
-2.10.2
-
diff --git a/kernels/linux-libre-xen/0010-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch b/kernels/linux-libre-xen/0008-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch
index 9892d2dfc..8f6952f19 100644
--- a/kernels/linux-libre-xen/0010-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch
+++ b/kernels/linux-libre-xen/0008-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch
@@ -1,7 +1,7 @@
-From bbaf3b78f27ea3557ce35e4267398e215091b68a Mon Sep 17 00:00:00 2001
+From 21fd4defb20c41ae93e86c4a5e6adcb1afd36be9 Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Thu, 11 Aug 2016 00:42:37 -0600
-Subject: [PATCH 10/13] exynos4412-odroid: set higher minimum buck2 regulator
+Subject: [PATCH 8/8] exynos4412-odroid: set higher minimum buck2 regulator
voltage
Set a higher minimum voltage to help reboot issue.
@@ -13,7 +13,7 @@ Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
-index 58ad48e7..f7c5571 100644
+index 8aa19ba..8e2d94e 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -423,7 +423,7 @@
@@ -26,5 +26,5 @@ index 58ad48e7..f7c5571 100644
regulator-always-on;
regulator-boot-on;
--
-2.10.2
+2.10.0
diff --git a/kernels/linux-libre-xen/0009-ARM-dts-imx6ul-pico-hobbit-Add-Wifi-support.patch b/kernels/linux-libre-xen/0009-ARM-dts-imx6ul-pico-hobbit-Add-Wifi-support.patch
deleted file mode 100644
index 653269f69..000000000
--- a/kernels/linux-libre-xen/0009-ARM-dts-imx6ul-pico-hobbit-Add-Wifi-support.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From aff9e86fd148f61a7c70333cf02b70189790df26 Mon Sep 17 00:00:00 2001
-From: Vanessa Maegima <vanessa.maegima@nxp.com>
-Date: Mon, 1 Aug 2016 09:54:14 -0300
-Subject: [PATCH 09/13] ARM: dts: imx6ul-pico-hobbit: Add Wifi support
-
-imx6ul-pico-hobbit has a bcm4339 wifi chip connected to usdhc2 port.
-
-Add support for the WL_REG_ON regulator, so that Wifi can be functional
-on this board.
-
-Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
-Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
----
- arch/arm/boot/dts/imx6ul-pico-hobbit.dts | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
-diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
-index 86f68fa..d3dfa5f 100644
---- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
-+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
-@@ -100,6 +100,18 @@
- gpio = <&gpio1 6 0>;
- };
-
-+ reg_brcm: brcm-reg {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_brcm_reg>;
-+ regulator-name = "brcm_reg";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <200000>;
-+ };
-+
- sound {
- compatible = "fsl,imx-audio-sgtl5000";
- model = "imx6ul-sgtl5000";
-@@ -325,12 +337,20 @@
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- no-1-8-v;
-+ non-removable;
- keep-power-in-suspend;
- wakeup-source;
-+ vmmc-supply = <&reg_brcm>;
- status = "okay";
- };
-
- &iomuxc {
-+ pinctrl_brcm_reg: brcmreggrp {
-+ fsl,pins = <
-+ MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x10b0 /* WL_REG_ON */
-+ >;
-+ };
-+
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x1b0b0
---
-2.10.2
-
diff --git a/kernels/linux-libre-xen/0011-usb-musb-Call-pm_runtime-from-musb_gadget_queue.patch b/kernels/linux-libre-xen/0011-usb-musb-Call-pm_runtime-from-musb_gadget_queue.patch
deleted file mode 100644
index 3d39037f2..000000000
--- a/kernels/linux-libre-xen/0011-usb-musb-Call-pm_runtime-from-musb_gadget_queue.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 7b64f74c06cacdba5eab9275f57df212540cad2e Mon Sep 17 00:00:00 2001
-From: Tony Lindgren <tony@atomide.com>
-Date: Fri, 30 Sep 2016 11:10:10 -0700
-Subject: [PATCH 11/13] usb: musb: Call pm_runtime from musb_gadget_queue
-
-If we're booting pandaboard using NFSroot over built-in g_ether, we
-can get the following after booting once and doing a warm reset:
-
-g_ether gadget: ecm_open
-g_ether gadget: notify connect true
-...
-WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147
-l3_interrupt_handler+0x220/0x34c
-44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Read):
-Data Access in User mode du ring Functional access
-...
-
-Fix the issue by calling pm_runtime functions from
-musb_gadget_queue.
-
-Note that in the long run we should be able to queue the pending
-transfers if pm_runtime is not active, and flush the queue from
-pm_runtime_resume.
-
-Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-Signed-off-by: Tony Lindgren <tony@atomide.com>
----
- drivers/usb/musb/musb_gadget.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
-index 6d1e975..8ccc1b1 100644
---- a/drivers/usb/musb/musb_gadget.c
-+++ b/drivers/usb/musb/musb_gadget.c
-@@ -1255,6 +1255,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
-
- map_dma_buffer(request, musb, musb_ep);
-
-+ pm_runtime_get_sync(musb->controller);
- spin_lock_irqsave(&musb->lock, lockflags);
-
- /* don't queue if the ep is down */
-@@ -1275,6 +1276,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
-
- unlock:
- spin_unlock_irqrestore(&musb->lock, lockflags);
-+ pm_runtime_mark_last_busy(musb->controller);
-+ pm_runtime_put_autosuspend(musb->controller);
-+
- return status;
- }
-
---
-2.10.2
-
diff --git a/kernels/linux-libre-xen/0012-phy-twl4030-usb-better-handle-musb_mailbox-failure.patch b/kernels/linux-libre-xen/0012-phy-twl4030-usb-better-handle-musb_mailbox-failure.patch
deleted file mode 100644
index 47581e739..000000000
--- a/kernels/linux-libre-xen/0012-phy-twl4030-usb-better-handle-musb_mailbox-failure.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 842bdf96a2e7a63ece87458ad7ecf1ded6a40a12 Mon Sep 17 00:00:00 2001
-From: Andreas Kemnade <andreas@kemnade.info>
-Date: Mon, 22 Aug 2016 21:24:22 +0200
-Subject: [PATCH 12/13] phy-twl4030-usb: better handle musb_mailbox() failure
-
-setting twl->linkstat = MUSB_UNKNOWN upon error in musb_mailbox as
-introduced in
-commit 12b7db2bf8b8 ("usb: musb: Return error value from musb_mailbox")
-causes twl4030_usb_irq() to not detect a state change form cable connected
-to cable disconnected after such an error so that
-pm_runtime_put_autosuspend() will not be called and the usage counter
-gets unbalanced. Such errors happen e.g. if the omap2430 module is not
-(yet) loaded during plug/unplug events.
-
-This patch introduces a flag instead that indicates whether there is
-information for the musb_mailbox pending and calls musb_mailbox() if
-that flag is set.
-
-Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
-Tested-by: Tony Lindgren <tony@atomide.com>
----
- drivers/phy/phy-twl4030-usb.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
-index d9b10a3..81067b4 100644
---- a/drivers/phy/phy-twl4030-usb.c
-+++ b/drivers/phy/phy-twl4030-usb.c
-@@ -172,6 +172,7 @@ struct twl4030_usb {
- int irq;
- enum musb_vbus_id_status linkstat;
- bool vbus_supplied;
-+ bool musb_mailbox_pending;
-
- struct delayed_work id_workaround_work;
- };
-@@ -569,9 +570,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_autosuspend(twl->dev);
- }
-+ twl->musb_mailbox_pending = true;
-+ }
-+ if (twl->musb_mailbox_pending) {
- err = musb_mailbox(status);
-- if (err)
-- twl->linkstat = MUSB_UNKNOWN;
-+ if (!err)
-+ twl->musb_mailbox_pending = false;
- }
-
- /* don't schedule during sleep - irq works right then */
-@@ -676,6 +680,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
- twl->irq = platform_get_irq(pdev, 0);
- twl->vbus_supplied = false;
- twl->linkstat = MUSB_UNKNOWN;
-+ twl->musb_mailbox_pending = false;
-
- twl->phy.dev = twl->dev;
- twl->phy.label = "twl4030";
---
-2.10.2
-
diff --git a/kernels/linux-libre-xen/0013-Revert-gpu-drm-omapdrm-dss-of-add-missing-of_node_pu.patch b/kernels/linux-libre-xen/0013-Revert-gpu-drm-omapdrm-dss-of-add-missing-of_node_pu.patch
deleted file mode 100644
index 4a99756a4..000000000
--- a/kernels/linux-libre-xen/0013-Revert-gpu-drm-omapdrm-dss-of-add-missing-of_node_pu.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From edbf64b26ba15e05cd15ea75bca263a5e748049f Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Tue, 4 Oct 2016 22:15:41 -0600
-Subject: [PATCH 13/13] Revert "gpu: drm: omapdrm: dss-of: add missing
- of_node_put after calling of_parse_phandle"
-
-This reverts commit 2ab9f5879162499e1c4e48613287e3f59e593c4f.
----
- drivers/gpu/drm/omapdrm/dss/dss-of.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/gpu/drm/omapdrm/dss/dss-of.c b/drivers/gpu/drm/omapdrm/dss/dss-of.c
-index e256d87..dfd4e96 100644
---- a/drivers/gpu/drm/omapdrm/dss/dss-of.c
-+++ b/drivers/gpu/drm/omapdrm/dss/dss-of.c
-@@ -125,16 +125,15 @@ u32 dss_of_port_get_port_number(struct device_node *port)
-
- static struct device_node *omapdss_of_get_remote_port(const struct device_node *node)
- {
-- struct device_node *np, *np_parent;
-+ struct device_node *np;
-
- np = of_parse_phandle(node, "remote-endpoint", 0);
- if (!np)
- return NULL;
-
-- np_parent = of_get_next_parent(np);
-- of_node_put(np);
-+ np = of_get_next_parent(np);
-
-- return np_parent;
-+ return np;
- }
-
- struct device_node *
---
-2.10.2
-
diff --git a/kernels/linux-libre-xen/PKGBUILD b/kernels/linux-libre-xen/PKGBUILD
index e6cdf4ef4..8444a9fba 100644
--- a/kernels/linux-libre-xen/PKGBUILD
+++ b/kernels/linux-libre-xen/PKGBUILD
@@ -9,8 +9,8 @@
# Based on linux-xen package
pkgbase=linux-libre-xen
-_pkgbasever=4.8-gnu
-_pkgver=4.8.17-gnu
+_pkgbasever=4.9-gnu
+_pkgver=4.9.6-gnu
_replacesarchkernel=('linux%') # '%' gets replaced with _kernelname
_replacesoldkernels=() # '%' gets replaced with _kernelname
@@ -44,7 +44,6 @@ source=("https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/l
# standard config files for mkinitcpio ramdisk
'linux.preset'
'change-default-console-loglevel.patch'
- 'net_handle_no_dst_on_skb_in_icmp6_send.patch'
'0001-x86-fpu-Fix-invalid-FPU-ptrace-state-after-execve.patch'
'0001-usb-serial-gadget-no-TTY-hangup-on-USB-disconnect-WI.patch'
'0002-fix-Atmel-maXTouch-touchscreen-support.patch'
@@ -58,15 +57,10 @@ source=("https://linux-libre.fsfla.org/pub/linux-libre/releases/${_pkgbasever}/l
'0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch'
'0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch'
'0007-set-default-cubietruck-led-triggers.patch'
- '0008-USB-armory-support.patch'
- '0009-ARM-dts-imx6ul-pico-hobbit-Add-Wifi-support.patch'
- '0010-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch'
- '0011-usb-musb-Call-pm_runtime-from-musb_gadget_queue.patch'
- '0012-phy-twl4030-usb-better-handle-musb_mailbox-failure.patch'
- '0013-Revert-gpu-drm-omapdrm-dss-of-add-missing-of_node_pu.patch')
-sha512sums=('728da6c27bd73a41866d37c82bfdc350a3bff59e15291e80a94af9e0b7b4401ea161da4c2ec4d8fc25d30c35becd85624ac32d068afff4c12ee7790c5649da2d'
+ '0008-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch')
+sha512sums=('885eb0a7fab45dc749acb4329b4330a43b704df2d5f2f5aac1811503c132ca53ca49452f9b1cc80b0826c7a4962dbe4937aecb697aa823b2543ba2cabc704816'
'SKIP'
- 'e8e52f5a4ea0a8c78cf9704963710962cfc33e764f3de14359591d5ed656b42212ccd83a20923e3c755375c040e155520aad01d41adebface831b5decc62c08e'
+ 'b2e545f9d71232ca5c6bc91fafe27594441a09df1822b3653370ed96fab8b1c155728c481cf53b9f9329cac9c3930d4bf8d13f6cd71a43df2fcc59ac2da15264'
'SKIP'
'13cb5bc42542e7b8bb104d5f68253f6609e463b6799800418af33eb0272cc269aaa36163c3e6f0aacbdaaa1d05e2827a4a7c4a08a029238439ed08b89c564bb3'
'SKIP'
@@ -74,30 +68,24 @@ sha512sums=('728da6c27bd73a41866d37c82bfdc350a3bff59e15291e80a94af9e0b7b4401ea16
'SKIP'
'7a3716bfe3b9f546da309c7492f3e08f8f506813afeb1c737a474c83313d5c313cf4582b65215c2cfce3b74d9d1021c96e8badafe8f6e5b01fe28d2b5c61ae78'
'SKIP'
- '77a6110b7417b10358281e29ff44acbeae00e6f5764cbc7be815bb62ce20e645658210b07ab43b2eb9a24b5d98c82ae052f36df9fbed7d5a4801d1944849143e'
- 'b45b4e43b34cebaa2188010ace502466158cef5853404c0124142d02487058123e968801fe9f66ea2610a0a556e34b80df3c0ed46672083d89f33932165e36a4'
+ '3019a601f5ea1b1de29284dc173021b79110ac8318a35a7802ecbc53bc52bceb64ffa517be504adf3dcef7bd8a31c1dfd859fa61f40c53c14808ff04e5cb1f03'
+ 'b66e9c26702baacc169b8155c8e0575d1597974d6f1f49f9191914979ee6be0bdfb1210195bf0632f5ce194d2b457d5f9b022eef8ba5a1ded43aae3336315098'
'd6faa67f3ef40052152254ae43fee031365d0b1524aa0718b659eb75afc21a3f79ea8d62d66ea311a800109bed545bc8f79e8752319cd378eef2cbd3a09aba22'
'2dc6b0ba8f7dbf19d2446c5c5f1823587de89f4e28e9595937dd51a87755099656f2acec50e3e2546ea633ad1bfd1c722e0c2b91eef1d609103d8abdc0a7cbaf'
'd9d28e02e964704ea96645a5107f8b65cae5f4fb4f537e224e5e3d087fd296cb770c29ac76e0ce95d173bc420ea87fb8f187d616672a60a0cae618b0ef15b8c8'
- 'c53bd47527adbd2599a583e05a7d24f930dc4e86b1de017486588205ad6f262a51a4551593bc7a1218c96541ea073ea03b770278d947b1cd0d2801311fcc80e5'
'002d5e0ccfa5824c1750912a6400ff722672d6587b74ba66b1127cf1228048f604bba107617cf4f4477884039af4d4d196cf1b74cefe43b0bddc82270f11940d'
'02af4dd2a007e41db0c63822c8ab3b80b5d25646af1906dc85d0ad9bb8bbf5236f8e381d7f91cf99ed4b0978c50aee37cb9567cdeef65b7ec3d91b882852b1af'
'b8fe56e14006ab866970ddbd501c054ae37186ddc065bb869cf7d18db8c0d455118d5bda3255fb66a0dde38b544655cfe9040ffe46e41d19830b47959b2fb168'
- 'fe200825918b2a6730000b78f940e76deb4c8a7f6bf8fbc6076b9f83696e21e7018a0fa70ba03342d1c0fcfb28fb398d5445b2a469efa97f9214e8e8cdf666f0'
+ '73024c09811a98292a6d0d8b74a5c85ef576cec256459fc66070eef142501742c6b49632dcaf45875e65404ea945da39a14ef1787e40e447cf05bede320c32da'
'SKIP'
- 'b465e902c387804d7ad7721cbd49d6c5d5b15cc321948fcaa620db3dfa9d3476b449cd7c3106ff2f30bc35e0250438464f95c69fecd393b78bb5aec102616891'
- '26029098acbfd12ebc9201df86faa7f906bf37e9df6929ddd2851bcc700828c808331d95874189cfab2c4396e48f257f71c468db6ff367ca3ff8d391d664e7a0'
- '7061ca97ae79c5fa22bdc46aab9f94e3d5079a6fe328816b8ec41c8df705ee8364b0452e3b780b5ebc5a1142e3dc41e0456bad2c9bfb877954f77795e028b07d'
- '34e8f42c10d75a9a1c89d6264af1a3f0b33c136fcd46267bbc20c348ce464743c06fdc0ca2da95a1215bd6ca5e9db9130aa0d85c88280344367a9c035f010db6'
- '2aca4f30c1fcc8032e511b9ee89ef9230d58e377e725e22fecc131e04ef93b0723e040539768cc7917f1be7067d24d371eac61536cc32ba0b404fe85c8657139'
- '9b882ac5ae02355e0c306fa7b3d074df05415a17a02bdc6e7c2d4a8c36bd00987aacc54b5c0af3264f4ee7c3bd49bd5f08bb73d994f2db1b3d0883e52598cc28'
- 'ed9b1f86f41547da9862c3b0aef27ca3944141af36392ea8bc2ac22954c4cb4d593e222ebbdcfaf8d45c55e632d1eaa733a25048046ee2960cbe359e8794fa95'
- 'a8f577cad348ac190f6b3462870b5a4ceeea9b732408074a4a0caed12f5cddc2ea5de3a7c9292e7b1de256670acf43741a80ad57d1f7a5fd3f9d5d9a80e39c73'
- '6fbb354cfa8c42406da016d300db39b831b4977f1bd33483045615c86ace2d570b9624946ef1ce2bc73cea4f849f7d692d8e81a7c8b173f5066afcb4b315810a'
- '2392019b53c2d4003956dc925f7b1c54506bdf32a848579d846a9230ba6526fbd3aa9d69d2cabf5a9d7b0b0bf77d17b7e6f71b6793339a61d3d592cc00098eba'
- 'c2c5a6187f64401423ce4edc857f27957b244f1b1f9b86a19ec556e7d9c42d27bf032605f842cc1b0b2f4967ca739e535b7f12f3dd798d4d70a325c336384055'
- 'e15c3ff1cc17e964aa69f7d3bc0df878a267298d73066c883542bf8e4373b797d5080aa5a26d05c6d03ec864f6898899183bd76dffec71e9bcb160aeb51033e0'
- 'f91a68687e5191057ebb6fd0aebe0ed5be0148589d15f3e0c4363de7bf7160e29686d4a22725e69d7c5f546c523618b6fad9cfb3444cdc46eaa4a89bc3be237b')
+ 'ccf18eb2c3d33a57871cbadd5ad825d2f2f489e69c54c7293b160abdc3e9e5c6a664ba7926a617d31affcf20b7ecb4e8de54fa78438c574aa1b257f686faade9'
+ '69f13bb2e353727acbe39034978729272511c6578aa2faf8c829e1bb89c22e769262289b76d93254314304ebd7547c45cdc8ba6afc278444a8fd09f71dff9757'
+ '47038a476ff90d7106e1ce2cf5dd3f2c356c75ab8cefc6901f8eddcbf7cd0f23c44f6ce96b2b3d57a6e3f30bdd5192cf3e75759277ab0ac6fbb179423f2431a0'
+ '75513d1d6dfeb6425763dc8fe8d7f607ddd11d2a8397230333a4e556b303ceb7e68bfdb26d0a10f4b557ef13adbf54c3aab00f5b493772a94b5cd87d143663c4'
+ '37df06631772200edc7e5a4450719155156a781e9a475383283627f6f1b8cbe94db6ba2e2fbc59107ea288846b56881b892e9b21d3d899b974fad4226c4def10'
+ '73916b59fd8f269ce2831d9a0710f503b9cd1004d94caf9e061ebff870a115cc8455409040574a609473e48c60b2f0b833c907327dacb085509e615c27dd463f'
+ 'eef5d8161edcc9817832de2000ad30320507a1e16fc321fb2b97dd2d159825b8f924cd29e5a4ffa29c339c8727f106730e6b6858c50d8afe7a5000629507badd'
+ 'b3aad9fd9292122fd3227f05d54742731bf4d6d57aaac680b34eca19597dfb56a7f54c7ad54f37cfc2ec7f622fbd90abe7f288f11f8eb98278ab07df32cf890a')
validpgpkeys=(
'474402C8C582DAFBE389C427BCB7CF877E7D47A7' # Alexandre Oliva
'C92BAA713B8D53D3CAE63FC9E6974752F9704456' # André Silva
@@ -137,21 +125,13 @@ prepare() {
patch -p1 -i "${srcdir}/0005-net-smsc95xx-Allow-mac-address-to-be-set-as-a-parame.patch"
patch -p1 -i "${srcdir}/0006-ARM-TLV320AIC23-SoC-Audio-Codec-Fix-errors-reported-.patch"
patch -p1 -i "${srcdir}/0007-set-default-cubietruck-led-triggers.patch"
- patch -p1 -i "${srcdir}/0008-USB-armory-support.patch"
- patch -p1 -i "${srcdir}/0009-ARM-dts-imx6ul-pico-hobbit-Add-Wifi-support.patch"
- patch -p1 -i "${srcdir}/0010-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch"
- patch -p1 -i "${srcdir}/0011-usb-musb-Call-pm_runtime-from-musb_gadget_queue.patch"
- patch -p1 -i "${srcdir}/0012-phy-twl4030-usb-better-handle-musb_mailbox-failure.patch"
- patch -p1 -i "${srcdir}/0013-Revert-gpu-drm-omapdrm-dss-of-add-missing-of_node_pu.patch"
+ patch -p1 -i "${srcdir}/0008-exynos4412-odroid-set-higher-minimum-buck2-regulator.patch"
fi
# add freedo as boot logo
install -m644 -t drivers/video/logo \
"${srcdir}/logo_linux_"{clut224.ppm,vga16.ppm,mono.pbm}
- # https://bugzilla.kernel.org/show_bug.cgi?id=189851
- patch -p1 -i "${srcdir}/net_handle_no_dst_on_skb_in_icmp6_send.patch"
-
# Revert a commit that causes memory corruption in i686 chroots
# ("valgrind bash" immediately crashes)
# https://bugzilla.kernel.org/show_bug.cgi?id=190061
diff --git a/kernels/linux-libre-xen/config.armv7h b/kernels/linux-libre-xen/config.armv7h
index a486a38a7..1ced2c004 100644
--- a/kernels/linux-libre-xen/config.armv7h
+++ b/kernels/linux-libre-xen/config.armv7h
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/arm 4.8.12-gnu-1-xen Kernel Configuration
+# Linux/arm 4.9.1-gnu-1-xen Kernel Configuration
#
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
@@ -76,6 +76,7 @@ CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
@@ -114,6 +115,7 @@ CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@@ -207,7 +209,7 @@ CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
-# CONFIG_SLAB_FREELIST_RANDOM is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
CONFIG_PROFILING=y
@@ -266,6 +268,7 @@ CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
@@ -318,6 +321,7 @@ CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
+CONFIG_BLK_MQ_PCI=y
#
# IO Schedulers
@@ -413,6 +417,7 @@ CONFIG_ARCH_BCM=y
# Other Architectures
#
CONFIG_ARCH_BCM2835=y
+# CONFIG_ARCH_BCM_53573 is not set
# CONFIG_ARCH_BCM_63XX is not set
# CONFIG_ARCH_BRCMSTB is not set
# CONFIG_ARCH_BERLIN is not set
@@ -503,10 +508,8 @@ CONFIG_SOC_TI81XX=y
#
# OMAP Legacy Platform Data Board Type
#
-# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OMAP3517EVM is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
CONFIG_OMAP5_ERRATA_801819=y
# CONFIG_ARCH_MMP is not set
@@ -625,6 +628,7 @@ CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_L2X0_PMU=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_PL310_ERRATA_727915=y
CONFIG_PL310_ERRATA_753970=y
@@ -674,6 +678,7 @@ CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
@@ -703,6 +708,7 @@ CONFIG_PCIE_XILINX=y
# CONFIG_PCI_LAYERSCAPE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCIE_ARMADA_8K is not set
+# CONFIG_PCIE_ROCKCHIP is not set
# CONFIG_PCCARD is not set
#
@@ -732,8 +738,14 @@ CONFIG_ARCH_NR_GPIO=1024
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
-CONFIG_HZ_FIXED=200
-CONFIG_HZ=200
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_100=y
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_ARM_PATCH_IDIV=y
@@ -852,13 +864,14 @@ CONFIG_ARM_IMX6Q_CPUFREQ=y
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
CONFIG_ARM_TEGRA20_CPUFREQ=y
CONFIG_ARM_TEGRA124_CPUFREQ=y
-CONFIG_QORIQ_CPUFREQ=y
+CONFIG_ARM_TI_CPUFREQ=y
+# CONFIG_QORIQ_CPUFREQ is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
+# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_DT_IDLE_STATES=y
@@ -867,7 +880,7 @@ CONFIG_DT_IDLE_STATES=y
#
CONFIG_ARM_CPUIDLE=y
# CONFIG_ARM_BIG_LITTLE_CPUIDLE is not set
-CONFIG_ARM_HIGHBANK_CPUIDLE=y
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
CONFIG_ARM_ZYNQ_CPUIDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
CONFIG_ARM_MVEBU_V7_CPUIDLE=y
@@ -892,6 +905,9 @@ CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
@@ -1001,6 +1017,7 @@ CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
+CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -1096,9 +1113,10 @@ CONFIG_NF_TABLES_INET=m
CONFIG_NF_TABLES_NETDEV=m
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
+CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
-CONFIG_NFT_RBTREE=m
-CONFIG_NFT_HASH=m
+CONFIG_NFT_SET_RBTREE=m
+CONFIG_NFT_SET_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
@@ -1106,9 +1124,11 @@ CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
+CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
@@ -1264,7 +1284,6 @@ CONFIG_IP_VS_PE_SIP=m
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_REJECT_IPV4=m
@@ -1421,6 +1440,7 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_HWMON=y
CONFIG_NET_DSA_TAG_BRCM=y
+CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
@@ -1530,7 +1550,9 @@ CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
+# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
+# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
@@ -1541,6 +1563,7 @@ CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_BATMAN_ADV_DEBUGFS=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
@@ -1730,6 +1753,7 @@ CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_MRVL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -1739,9 +1763,12 @@ CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_IPV6 is not set
+# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
# CONFIG_AF_KCM is not set
+# CONFIG_STREAM_PARSER is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
@@ -1796,7 +1823,7 @@ CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
-# CONFIG_NFC_NCI_UART is not set
+CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
@@ -1804,10 +1831,11 @@ CONFIG_NFC_SHDLC=y
# Near Field Communication (NFC) devices
#
CONFIG_NFC_WILINK=m
-# CONFIG_NFC_TRF7970A is not set
+CONFIG_NFC_TRF7970A=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
-# CONFIG_NFC_FDP is not set
+CONFIG_NFC_FDP=m
+CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN533=m
@@ -1817,14 +1845,19 @@ CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
-# CONFIG_NFC_MRVL_I2C is not set
-# CONFIG_NFC_MRVL_SPI is not set
-# CONFIG_NFC_ST21NFCA_I2C is not set
-# CONFIG_NFC_ST_NCI_I2C is not set
-# CONFIG_NFC_ST_NCI_SPI is not set
-# CONFIG_NFC_NXP_NCI is not set
-# CONFIG_NFC_S3FWRN5_I2C is not set
-# CONFIG_NFC_ST95HF is not set
+CONFIG_NFC_MRVL_UART=m
+CONFIG_NFC_MRVL_I2C=m
+CONFIG_NFC_MRVL_SPI=m
+CONFIG_NFC_ST21NFCA=m
+CONFIG_NFC_ST21NFCA_I2C=m
+CONFIG_NFC_ST_NCI=m
+CONFIG_NFC_ST_NCI_I2C=m
+CONFIG_NFC_ST_NCI_SPI=m
+CONFIG_NFC_NXP_NCI=m
+CONFIG_NFC_NXP_NCI_I2C=m
+CONFIG_NFC_S3FWRN5=m
+CONFIG_NFC_S3FWRN5_I2C=m
+CONFIG_NFC_ST95HF=m
CONFIG_LWTUNNEL=y
CONFIG_DST_CACHE=y
# CONFIG_NET_DEVLINK is not set
@@ -1856,6 +1889,7 @@ CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_SOC_BUS=y
@@ -1893,6 +1927,7 @@ CONFIG_ARM_CCI400_PORT_CTRL=y
CONFIG_MVEBU_MBUS=y
CONFIG_OMAP_INTERCONNECT=y
CONFIG_OMAP_OCP2SCP=y
+CONFIG_SIMPLE_PM_BUS=y
CONFIG_SUNXI_RSB=y
CONFIG_VEXPRESS_CONFIG=y
CONFIG_CONNECTOR=y
@@ -1996,7 +2031,7 @@ CONFIG_MTD_NAND_RICOH=m
# CONFIG_MTD_NAND_DOCG4 is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_NANDSIM=m
+# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_GPMI_NAND is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_PLATFORM is not set
@@ -2045,7 +2080,6 @@ CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_MTD=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
@@ -2110,9 +2144,6 @@ CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_ARM_CHARLCD=y
-CONFIG_BMP085=m
-CONFIG_BMP085_I2C=m
-CONFIG_BMP085_SPI=m
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
@@ -2258,6 +2289,7 @@ CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
+# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
@@ -2449,7 +2481,6 @@ CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set
-CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
@@ -2461,11 +2492,8 @@ CONFIG_FUSION_CTL=m
#
# IEEE 1394 (FireWire) support
#
-CONFIG_FIREWIRE=m
-CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_SBP2=m
-CONFIG_FIREWIRE_NET=m
-CONFIG_FIREWIRE_NOSY=m
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
@@ -2531,6 +2559,8 @@ CONFIG_B53_MDIO_DRIVER=m
# CONFIG_B53_MMAP_DRIVER is not set
# CONFIG_B53_SRAB_DRIVER is not set
CONFIG_NET_DSA_MV88E6XXX=m
+CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
+# CONFIG_NET_DSA_QCA8K is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
@@ -2546,6 +2576,7 @@ CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
+CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
CONFIG_PCNET32=m
@@ -2707,6 +2738,7 @@ CONFIG_QED=m
CONFIG_QEDE=m
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000 is not set
+# CONFIG_QCOM_EMAC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
@@ -2783,40 +2815,46 @@ CONFIG_PHYLIB=y
CONFIG_SWPHY=y
#
+# MDIO bus device drivers
+#
+CONFIG_MDIO_BCM_UNIMAC=m
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+CONFIG_MDIO_SUN4I=m
+
+#
# MII PHY device drivers
#
+CONFIG_AMD_PHY=m
CONFIG_AQUANTIA_PHY=m
CONFIG_AT803X_PHY=m
-CONFIG_AMD_PHY=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=y
-CONFIG_TERANETICS_PHY=m
-CONFIG_SMSC_PHY=y
-CONFIG_BCM_NET_PHYLIB=m
-CONFIG_BROADCOM_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM87XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
+CONFIG_BCM_NET_PHYLIB=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_DAVICOM_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
-CONFIG_MICROCHIP_PHY=m
CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_MDIO_SUN4I=m
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-CONFIG_MDIO_BCM_UNIMAC=m
+CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=m
+CONFIG_MICROCHIP_PHY=m
+# CONFIG_MICROSEMI_PHY is not set
+CONFIG_NATIONAL_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_SMSC_PHY=y
+CONFIG_STE10XP=m
+CONFIG_TERANETICS_PHY=m
+CONFIG_VITESSE_PHY=y
+# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
@@ -3144,6 +3182,7 @@ CONFIG_INPUT_EVDEV=m
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADC is not set
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
@@ -3243,6 +3282,7 @@ CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
@@ -3259,11 +3299,11 @@ CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
-CONFIG_TOUCHSCREEN_FT6236=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
@@ -3342,6 +3382,7 @@ CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_BEEPER=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
+CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
@@ -3381,6 +3422,7 @@ CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
+# CONFIG_RMI4_F54 is not set
#
# Hardware I/O ports
@@ -3628,6 +3670,7 @@ CONFIG_SPI_MASTER=y
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
+# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_DAVINCI=y
@@ -3686,12 +3729,11 @@ CONFIG_SSI_PROTOCOL=m
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
-CONFIG_NTP_PPS=y
#
# PPS clients support
#
-# CONFIG_PPS_CLIENT_KTIMER is not set
+CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_GPIO=m
@@ -3750,6 +3792,7 @@ CONFIG_PINCTRL_SUNXI=y
CONFIG_PINCTRL_SUN4I_A10=y
CONFIG_PINCTRL_SUN5I_A10S=y
CONFIG_PINCTRL_SUN5I_A13=y
+CONFIG_PINCTRL_GR8=y
CONFIG_PINCTRL_SUN6I_A31=y
CONFIG_PINCTRL_SUN6I_A31S=y
CONFIG_PINCTRL_SUN6I_A31_R=y
@@ -3770,7 +3813,6 @@ CONFIG_PINCTRL_TEGRA124=y
CONFIG_PINCTRL_TEGRA_XUSB=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
@@ -3784,11 +3826,13 @@ CONFIG_GPIO_MAX730X=m
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
+CONFIG_GPIO_AXP209=y
CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EM is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_MPC8XXX is not set
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_MXC=y
@@ -3816,6 +3860,7 @@ CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_TPIC2810=m
+# CONFIG_GPIO_TS4900 is not set
#
# MFD GPIO expanders
@@ -3823,6 +3868,7 @@ CONFIG_GPIO_TPIC2810=m
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=m
+# CONFIG_HTC_EGPIO is not set
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_STMPE is not set
# CONFIG_GPIO_TPS65086 is not set
@@ -3889,6 +3935,24 @@ CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_BQ27000=m
+CONFIG_POWER_AVS=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_AS3722=y
+# CONFIG_POWER_RESET_BRCMKONA is not set
+# CONFIG_POWER_RESET_BRCMSTB is not set
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_IMX=y
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_QNAP is not set
+CONFIG_POWER_RESET_RESTART=y
+CONFIG_POWER_RESET_VERSATILE=y
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_RESET_KEYSTONE=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
@@ -3929,30 +3993,12 @@ CONFIG_CHARGER_TPS65217=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_AXP20X_POWER=y
+CONFIG_POWER_SEQUENCE=y
#
# Power Sequence Support
#
-# CONFIG_PWRSEQ_GENERIC is not set
-# CONFIG_PWRSEQ_SAMPLE is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_AS3722=y
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_GPIO_RESTART=y
-CONFIG_POWER_RESET_IMX=y
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_QNAP is not set
-CONFIG_POWER_RESET_RESTART=y
-CONFIG_POWER_RESET_VERSATILE=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_RESET_KEYSTONE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_POWER_AVS=y
-CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_PWRSEQ_GENERIC=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
@@ -4123,6 +4169,7 @@ CONFIG_CLOCK_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_IMX_THERMAL=y
+# CONFIG_QORIQ_THERMAL is not set
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_ARMADA_THERMAL=y
@@ -4198,6 +4245,11 @@ CONFIG_XEN_WDT=m
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
+
+#
+# Watchdog Pretimeout Governors
+#
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
#
@@ -4244,6 +4296,7 @@ CONFIG_MFD_AS3722=y
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=y
+# CONFIG_MFD_AC100 is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
@@ -4260,11 +4313,11 @@ CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_DLN2=m
+CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
@@ -4325,6 +4378,7 @@ CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
+# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
@@ -4377,6 +4431,7 @@ CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX14577=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
@@ -4438,6 +4493,7 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
# CONFIG_V4L2_FLASH_LED_CLASS is not set
@@ -4591,6 +4647,7 @@ CONFIG_VIDEO_TM6000_DVB=m
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
@@ -4657,6 +4714,7 @@ CONFIG_MEDIA_PCI_SUPPORT=y
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
+# CONFIG_VIDEO_TW5864 is not set
CONFIG_VIDEO_TW68=m
# CONFIG_VIDEO_TW686X is not set
@@ -4733,7 +4791,6 @@ CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
-# CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
CONFIG_VIDEO_AM437X_VPFE=m
CONFIG_VIDEO_XILINX=m
CONFIG_VIDEO_XILINX_TPG=m
@@ -4786,12 +4843,6 @@ CONFIG_RADIO_WL1273=m
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
-
-#
-# Supported FireWire (IEEE 1394) Adapters
-#
-CONFIG_DVB_FIREDTV=m
-CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
@@ -4809,7 +4860,7 @@ CONFIG_SMS_SIANO_RC=y
CONFIG_VIDEO_V4L2_TPG=m
#
-# Media ancillary drivers (tuners, sensors, i2c, frontends)
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
@@ -4863,6 +4914,7 @@ CONFIG_VIDEO_SAA7127=m
#
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9V011=m
#
@@ -5020,6 +5072,7 @@ CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
+CONFIG_DVB_GP8PSK_FE=m
#
# DVB-C (cable) frontends
@@ -5118,11 +5171,9 @@ CONFIG_DRM_I2C_ADIHDMI=m
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
-# CONFIG_DRM_TDFX is not set
CONFIG_DRM_ARM=y
# CONFIG_DRM_HDLCD is not set
CONFIG_DRM_MALI_DISPLAY=m
-# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
@@ -5134,9 +5185,6 @@ CONFIG_NOUVEAU_PLATFORM_DRIVER=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
-# CONFIG_DRM_MGA is not set
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VGEM=m
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS_IOMMU=y
@@ -5225,6 +5273,7 @@ CONFIG_DRM_PANEL=y
# Display Panels
#
CONFIG_DRM_PANEL_SIMPLE=y
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
@@ -5237,6 +5286,7 @@ CONFIG_DRM_BRIDGE=y
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=m
+# CONFIG_DRM_DUMB_VGA_DAC is not set
CONFIG_DRM_DW_HDMI=m
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_NXP_PTN3460=y
@@ -5257,6 +5307,8 @@ CONFIG_DRM_VC4=m
CONFIG_DRM_ETNAVIV=m
# CONFIG_DRM_ETNAVIV_REGISTER_LOGGING is not set
# CONFIG_DRM_ARCPGU is not set
+# CONFIG_DRM_LEGACY is not set
+# CONFIG_DRM_TINYDRM is not set
#
# Frame buffer Devices
@@ -5336,9 +5388,6 @@ CONFIG_FB_MX3=y
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_MXS is not set
CONFIG_FB_SIMPLE=y
-CONFIG_EXYNOS_VIDEO=y
-CONFIG_EXYNOS_MIPI_DSI=y
-# CONFIG_EXYNOS_LCD_S6E8AX0 is not set
CONFIG_FB_SSD1307=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -5541,15 +5590,6 @@ CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
-CONFIG_SND_FIREWIRE=y
-CONFIG_SND_FIREWIRE_LIB=m
-CONFIG_SND_DICE=m
-CONFIG_SND_OXFW=m
-CONFIG_SND_ISIGHT=m
-CONFIG_SND_FIREWORKS=m
-CONFIG_SND_BEBOB=m
-CONFIG_SND_FIREWIRE_DIGI00X=m
-CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
@@ -5610,6 +5650,7 @@ CONFIG_SND_SOC_ROCKCHIP_I2S=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
+# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set
CONFIG_SND_SOC_SAMSUNG=m
CONFIG_SND_SAMSUNG_PCM=m
CONFIG_SND_SAMSUNG_SPDIF=m
@@ -5641,6 +5682,7 @@ CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_SND_SOC_TEGRA_RT5677=m
+CONFIG_SND_SOC_TEGRA_SGTL5000=m
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
@@ -5674,6 +5716,7 @@ CONFIG_SND_SOC_CS42L51=m
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
CONFIG_SND_SOC_DMIC=m
+CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
@@ -5710,6 +5753,7 @@ CONFIG_SND_SOC_SPDIF=m
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
+CONFIG_SND_SOC_TDM=m
# CONFIG_SND_SOC_TFA9879 is not set
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
@@ -5742,9 +5786,11 @@ CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WM9712=m
CONFIG_SND_SOC_MC13783=m
+# CONFIG_SND_SOC_NAU8810 is not set
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
@@ -5878,7 +5924,7 @@ CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_OTG_FSM=y
-CONFIG_USB_ULPI_BUS=y
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
@@ -5964,6 +6010,8 @@ CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_VHCI_HC_PORTS=8
+CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
@@ -6121,6 +6169,7 @@ CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_HSIC_USB4604=y
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
@@ -6212,6 +6261,7 @@ CONFIG_USB_G_DBGP=m
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
CONFIG_USB_LED_TRIG=y
+CONFIG_USB_ULPI_BUS=y
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
@@ -6297,8 +6347,8 @@ CONFIG_LEDS_CLASS_FLASH=m
# LED drivers
#
# CONFIG_LEDS_AAT1290 is not set
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
+CONFIG_LEDS_BCM6328=m
+CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_PCA9532=m
@@ -6327,7 +6377,8 @@ CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_KTD2692 is not set
-# CONFIG_LEDS_IS31FL32XX is not set
+CONFIG_LEDS_IS31FL319X=m
+CONFIG_LEDS_IS31FL32XX=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
@@ -6417,6 +6468,7 @@ CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1307_HWMON=y
+# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
@@ -6430,7 +6482,6 @@ CONFIG_RTC_DRV_RK808=y
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_ISL12057=y
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF85063=m
@@ -6639,9 +6690,6 @@ CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_R8188EU=m
CONFIG_88EU_AP_MODE=y
-CONFIG_R8723AU=m
-CONFIG_8723AU_AP_MODE=y
-CONFIG_8723AU_BT_COEXIST=y
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
@@ -6746,7 +6794,6 @@ CONFIG_I2C_BCM2048=m
# CONFIG_MEDIA_CEC is not set
CONFIG_DVB_CXD2099=m
CONFIG_VIDEO_OMAP4=m
-# CONFIG_VIDEO_TW686X_KH is not set
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IMON=m
@@ -6764,9 +6811,14 @@ CONFIG_ASHMEM=y
# CONFIG_ION is not set
# CONFIG_STAGING_BOARD is not set
CONFIG_LTE_GDM724X=m
-# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_LNET is not set
+CONFIG_LNET=m
+CONFIG_LNET_MAX_PAYLOAD=1048576
+CONFIG_LNET_SELFTEST=m
+CONFIG_LUSTRE_FS=m
+CONFIG_LUSTRE_OBD_MAX_IOCTL_BUFFER=8192
+# CONFIG_LUSTRE_DEBUG_EXPENSIVE_CHECK is not set
+CONFIG_LUSTRE_TRANSLATE_ERRNOS=y
# CONFIG_DGNC is not set
CONFIG_GS_FPGABOOT=m
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
@@ -6804,10 +6856,13 @@ CONFIG_FB_TFT_UPD161704=m
CONFIG_FB_TFT_WATTEROTT=m
CONFIG_FB_FLEX=m
CONFIG_FB_TFT_FBTFT_DEVICE=m
-# CONFIG_WILC1000_SDIO is not set
-# CONFIG_WILC1000_SPI is not set
+CONFIG_WILC1000=m
+CONFIG_WILC1000_SDIO=m
+CONFIG_WILC1000_SPI=m
+# CONFIG_WILC1000_HW_OOB_INTR is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
+# CONFIG_GREYBUS is not set
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC_CHARDEV=y
@@ -6822,9 +6877,7 @@ CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_VERSATILE=y
CONFIG_CLK_SP810=y
CONFIG_CLK_VEXPRESS_OSC=y
-CONFIG_COMMON_CLK_MAX_GEN=y
CONFIG_COMMON_CLK_MAX77686=y
-CONFIG_COMMON_CLK_MAX77802=y
CONFIG_COMMON_CLK_RK808=y
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
@@ -6860,12 +6913,16 @@ CONFIG_SUNXI_CCU_DIV=y
CONFIG_SUNXI_CCU_FRAC=y
CONFIG_SUNXI_CCU_GATE=y
CONFIG_SUNXI_CCU_MUX=y
+CONFIG_SUNXI_CCU_MULT=y
CONFIG_SUNXI_CCU_PHASE=y
CONFIG_SUNXI_CCU_NK=y
CONFIG_SUNXI_CCU_NKM=y
CONFIG_SUNXI_CCU_NKMP=y
CONFIG_SUNXI_CCU_NM=y
CONFIG_SUNXI_CCU_MP=y
+CONFIG_SUN6I_A31_CCU=y
+CONFIG_SUN8I_A23_CCU=y
+CONFIG_SUN8I_A33_CCU=y
CONFIG_SUN8I_H3_CCU=y
CONFIG_TEGRA_CLK_EMC=y
CONFIG_COMMON_CLK_TI_ADPLL=y
@@ -6911,6 +6968,7 @@ CONFIG_CLKSRC_VERSATILE=y
CONFIG_CLKSRC_IMX_GPT=y
CONFIG_MAILBOX=y
# CONFIG_ARM_MHU is not set
+# CONFIG_PLATFORM_MHU is not set
CONFIG_PL320_MBOX=y
CONFIG_OMAP2PLUS_MBOX=y
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
@@ -6951,6 +7009,7 @@ CONFIG_WKUP_M3_RPROC=y
# Rpmsg drivers
#
CONFIG_RPMSG=m
+CONFIG_RPMSG_VIRTIO=m
#
# SOC (System On Chip) specific Drivers
@@ -6990,9 +7049,11 @@ CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
CONFIG_ARM_TEGRA_DEVFREQ=y
+# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
CONFIG_PM_DEVFREQ_EVENT=y
-# CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP is not set
+CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
+CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=y
CONFIG_EXTCON=y
#
@@ -7006,6 +7067,7 @@ CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
CONFIG_EXTCON_USB_GPIO=y
@@ -7361,6 +7423,7 @@ CONFIG_PWM_BCM2835=m
CONFIG_PWM_CROS_EC=m
# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_IMX=m
+CONFIG_PWM_MESON=m
CONFIG_PWM_OMAP_DMTIMER=m
CONFIG_PWM_PCA9685=m
CONFIG_PWM_ROCKCHIP=m
@@ -7389,7 +7452,16 @@ CONFIG_IPACK_BUS=y
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_ATH79 is not set
+# CONFIG_RESET_BERLIN is not set
+# CONFIG_RESET_LPC18XX is not set
+CONFIG_RESET_MESON=y
+# CONFIG_RESET_PISTACHIO is not set
+CONFIG_RESET_SOCFPGA=y
+# CONFIG_RESET_STM32 is not set
+CONFIG_RESET_SUNXI=y
CONFIG_TI_SYSCON_RESET=y
+CONFIG_RESET_ZYNQ=y
# CONFIG_FMC is not set
#
@@ -7417,8 +7489,11 @@ CONFIG_PHY_EXYNOS4X12_USB2=y
CONFIG_PHY_EXYNOS5250_USB2=y
CONFIG_PHY_EXYNOS5_USBDRD=y
CONFIG_PHY_ROCKCHIP_USB=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_EMMC=y
CONFIG_PHY_ROCKCHIP_DP=y
+CONFIG_PHY_ROCKCHIP_PCIE=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
# CONFIG_PHY_TUSB1210 is not set
CONFIG_PHY_TEGRA_XUSB=y
# CONFIG_POWERCAP is not set
@@ -7815,7 +7890,7 @@ CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-# CONFIG_WQ_WATCHDOG is not set
+CONFIG_WQ_WATCHDOG=y
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
@@ -7914,6 +7989,7 @@ CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
@@ -7953,6 +8029,7 @@ CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_SMACK_BRINGUP=y
# CONFIG_SECURITY_SMACK_NETFILTER is not set
+# CONFIG_SECURITY_SMACK_APPEND_SIGNALS is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
@@ -8131,6 +8208,7 @@ CONFIG_CRYPTO_DEV_S5P=m
# CONFIG_CRYPTO_DEV_MXS_DCP is not set
CONFIG_CRYPTO_DEV_SUN4I_SS=m
CONFIG_CRYPTO_DEV_ROCKCHIP=m
+# CONFIG_CRYPTO_DEV_CHELSIO is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
@@ -8221,7 +8299,6 @@ CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
@@ -8246,6 +8323,7 @@ CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
+CONFIG_SBITMAP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_ARM_HOST=y
diff --git a/kernels/linux-libre-xen/config.i686 b/kernels/linux-libre-xen/config.i686
index ad32987c2..31d275ff1 100644
--- a/kernels/linux-libre-xen/config.i686
+++ b/kernels/linux-libre-xen/config.i686
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Linux/x86 4.8.0-gnu-1-xen Kernel Configuration
+# Linux/x86 4.9.5-gnu-1-xen Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
@@ -43,6 +43,7 @@ CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
+CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
@@ -157,7 +158,7 @@ CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
-# CONFIG_CGROUP_PERF is not set
+CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
@@ -295,6 +296,7 @@ CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+# CONFIG_HAVE_ARCH_VMAP_STACK is not set
#
# GCOV-based kernel profiling
@@ -348,6 +350,7 @@ CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
+CONFIG_BLK_MQ_PCI=y
#
# IO Schedulers
@@ -386,7 +389,7 @@ CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
+CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
@@ -395,7 +398,8 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
+# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
@@ -605,13 +609,11 @@ CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
-CONFIG_DPM_WATCHDOG=y
-CONFIG_DPM_WATCHDOG_TIMEOUT=60
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_ACPI=y
@@ -661,8 +663,11 @@ CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_DPTF_POWER=m
+CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
-# CONFIG_PMIC_OPREGION is not set
+CONFIG_PMIC_OPREGION=y
+CONFIG_CRC_PMIC_OPREGION=y
+CONFIG_BXT_WC_PMIC_OPREGION=y
CONFIG_ACPI_CONFIGFS=m
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
@@ -684,15 +689,15 @@ CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
@@ -759,6 +764,7 @@ CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
+CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
@@ -835,7 +841,6 @@ CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
-CONFIG_VMD=m
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
@@ -907,6 +912,7 @@ CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
+CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -1002,9 +1008,10 @@ CONFIG_NF_TABLES_INET=m
CONFIG_NF_TABLES_NETDEV=m
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
+CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
-CONFIG_NFT_RBTREE=m
-CONFIG_NFT_HASH=m
+CONFIG_NFT_SET_RBTREE=m
+CONFIG_NFT_SET_HASH=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
@@ -1012,9 +1019,11 @@ CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_QUEUE=m
+CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
@@ -1170,7 +1179,6 @@ CONFIG_IP_VS_PE_SIP=m
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_REJECT_IPV4=m
@@ -1321,8 +1329,10 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_HWMON=y
CONFIG_NET_DSA_TAG_BRCM=y
+CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_DSA_TAG_QCA=y
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
@@ -1404,7 +1414,15 @@ CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_CANID=m
+CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
@@ -1419,9 +1437,12 @@ CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
+CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_IFE=m
+CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
+CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -1432,6 +1453,7 @@ CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
+CONFIG_BATMAN_ADV_DEBUGFS=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
@@ -1636,6 +1658,7 @@ CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
+CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -1649,9 +1672,12 @@ CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
+CONFIG_AF_RXRPC_IPV6=y
+# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
CONFIG_AF_KCM=m
+CONFIG_STREAM_PARSER=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
@@ -1764,6 +1790,7 @@ CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
@@ -1900,7 +1927,6 @@ CONFIG_OF_NET=y
CONFIG_OF_MDIO=m
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_MTD=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
@@ -1992,9 +2018,6 @@ CONFIG_HMC6352=m
CONFIG_DS1682=m
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
-CONFIG_BMP085=m
-CONFIG_BMP085_I2C=m
-# CONFIG_BMP085_SPI is not set
CONFIG_PCH_PHUB=m
CONFIG_USB_SWITCH_FSA9480=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
@@ -2118,7 +2141,6 @@ CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
-CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
@@ -2143,7 +2165,6 @@ CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
-CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
@@ -2155,6 +2176,7 @@ CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
@@ -2173,7 +2195,6 @@ CONFIG_FCOE_FNIC=m
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
@@ -2200,7 +2221,6 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
@@ -2212,12 +2232,6 @@ CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
-CONFIG_SCSI_T128=m
-CONFIG_SCSI_U14_34F=m
-# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
-# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
-CONFIG_SCSI_U14_34F_MAX_TAGS=8
-CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_WD719X=m
# CONFIG_SCSI_DEBUG is not set
@@ -2501,6 +2515,8 @@ CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_NET_DSA_MV88E6XXX=m
+CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
+CONFIG_NET_DSA_QCA8K=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
@@ -2518,6 +2534,8 @@ CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=m
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_LANCE=m
@@ -2678,6 +2696,7 @@ CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCA7000=m
+CONFIG_QCOM_EMAC=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
@@ -2748,41 +2767,47 @@ CONFIG_PHYLIB=m
CONFIG_SWPHY=y
#
+# MDIO bus device drivers
+#
+CONFIG_MDIO_BCM_UNIMAC=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_MDIO_BUS_MUX=m
+CONFIG_MDIO_BUS_MUX_GPIO=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=m
+# CONFIG_MDIO_GPIO is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+
+#
# MII PHY device drivers
#
+CONFIG_AMD_PHY=m
CONFIG_AQUANTIA_PHY=m
CONFIG_AT803X_PHY=m
-CONFIG_AMD_PHY=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_TERANETICS_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BCM_NET_PHYLIB=m
-CONFIG_BROADCOM_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM87XX_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
-CONFIG_MICREL_PHY=m
+CONFIG_BCM_NET_PHYLIB=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_DAVICOM_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
-CONFIG_MICROCHIP_PHY=m
CONFIG_FIXED_PHY=m
-CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MDIO_BUS_MUX=m
-CONFIG_MDIO_BUS_MUX_GPIO=m
-CONFIG_MDIO_BUS_MUX_MMIOREG=m
-CONFIG_MDIO_BCM_UNIMAC=m
+CONFIG_ICPLUS_PHY=m
CONFIG_INTEL_XWAY_PHY=m
-# CONFIG_MDIO_HISI_FEMAC is not set
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_MICROCHIP_PHY=m
+CONFIG_MICROSEMI_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_STE10XP=m
+CONFIG_TERANETICS_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_XILINX_GMII2RGMII=m
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PLIP=m
CONFIG_PPP=m
@@ -3280,6 +3305,7 @@ CONFIG_INPUT_EVDEV=m
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADC is not set
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=m
@@ -3384,6 +3410,7 @@ CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
@@ -3399,11 +3426,11 @@ CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
-CONFIG_TOUCHSCREEN_FT6236=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
+CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
@@ -3481,6 +3508,7 @@ CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_BEEPER=m
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
@@ -3516,6 +3544,7 @@ CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
+CONFIG_RMI4_F54=y
#
# Hardware I/O ports
@@ -3599,6 +3628,7 @@ CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=m
CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_MOXA=m
CONFIG_SERIAL_OF_PLATFORM=m
@@ -3835,7 +3865,6 @@ CONFIG_SPMI=m
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
-# CONFIG_NTP_PPS is not set
#
# PPS clients support
@@ -3872,7 +3901,6 @@ CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
@@ -3890,6 +3918,7 @@ CONFIG_GPIO_SYSFS=y
# CONFIG_GPIO_GRGPIO is not set
CONFIG_GPIO_ICH=m
CONFIG_GPIO_LYNXPOINT=y
+# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set
@@ -3902,6 +3931,7 @@ CONFIG_GPIO_LYNXPOINT=y
# CONFIG_GPIO_104_IDIO_16 is not set
# CONFIG_GPIO_104_IDI_48 is not set
# CONFIG_GPIO_F7188X is not set
+# CONFIG_GPIO_GPIO_MM is not set
# CONFIG_GPIO_IT87 is not set
CONFIG_GPIO_SCH=m
CONFIG_GPIO_SCH311X=m
@@ -3918,6 +3948,7 @@ CONFIG_GPIO_SCH311X=m
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TPIC2810 is not set
+# CONFIG_GPIO_TS4900 is not set
#
# MFD GPIO expanders
@@ -3928,6 +3959,7 @@ CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_UCB1400 is not set
+CONFIG_GPIO_WHISKEY_COVE=y
#
# PCI GPIO expanders
@@ -3956,6 +3988,16 @@ CONFIG_GPIO_AMD8111=m
#
CONFIG_GPIO_VIPERBOARD=m
# CONFIG_W1 is not set
+CONFIG_POWER_AVS=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_RESTART is not set
+# CONFIG_POWER_RESET_SYSCON is not set
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+CONFIG_REBOOT_MODE=m
+CONFIG_SYSCON_REBOOT_MODE=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
@@ -3984,16 +4026,6 @@ CONFIG_CHARGER_BQ24735=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-CONFIG_REBOOT_MODE=m
-CONFIG_SYSCON_REBOOT_MODE=m
-CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
@@ -4176,6 +4208,7 @@ CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
+# CONFIG_QORIQ_THERMAL is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
@@ -4187,6 +4220,7 @@ CONFIG_INTEL_SOC_DTS_THERMAL=m
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
CONFIG_INT3406_THERMAL=m
+CONFIG_INTEL_BXT_PMIC_THERMAL=m
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_QCOM_SPMI_TEMP_ALARM=m
CONFIG_GENERIC_ADC_THERMAL=m
@@ -4200,6 +4234,7 @@ CONFIG_WATCHDOG_SYSFS=y
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_GPIO_WATCHDOG=m
+CONFIG_WDAT_WDT=m
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
# CONFIG_CADENCE_WATCHDOG is not set
@@ -4265,6 +4300,15 @@ CONFIG_WDTPCI=m
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
+
+#
+# Watchdog Pretimeout Governors
+#
+CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
+# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
+CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
+CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m
+CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
CONFIG_SSB_POSSIBLE=y
#
@@ -4324,6 +4368,7 @@ CONFIG_MFD_CROS_EC_SPI=m
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
CONFIG_MFD_MC13XXX=m
# CONFIG_MFD_MC13XXX_SPI is not set
CONFIG_MFD_MC13XXX_I2C=m
@@ -4387,6 +4432,7 @@ CONFIG_TPS6507X=m
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=m
+# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS65218=m
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
@@ -4434,6 +4480,7 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
# CONFIG_V4L2_FLASH_LED_CLASS is not set
@@ -4589,6 +4636,7 @@ CONFIG_VIDEO_TM6000_DVB=m
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
@@ -4656,6 +4704,7 @@ CONFIG_MEDIA_PCI_SUPPORT=y
#
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SOLO6X10=m
+CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
CONFIG_VIDEO_ZORAN=m
@@ -4791,7 +4840,7 @@ CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
#
-# Media ancillary drivers (tuners, sensors, i2c, frontends)
+# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
@@ -4995,6 +5044,7 @@ CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
+CONFIG_DVB_GP8PSK_FE=m
#
# DVB-C (cable) frontends
@@ -5100,15 +5150,13 @@ CONFIG_DRM_TTM=m
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
-# CONFIG_DRM_RADEON_USERPTR is not set
+CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=m
-# CONFIG_DRM_AMDGPU_CIK is not set
+CONFIG_DRM_AMDGPU_SI=y
+CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-CONFIG_DRM_AMD_POWERPLAY=y
#
# ACP (Audio CoProcessor) Configuration
@@ -5122,10 +5170,6 @@ CONFIG_DRM_I915=m
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
-CONFIG_DRM_MGA=m
-CONFIG_DRM_SIS=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
CONFIG_DRM_VGEM=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
@@ -5145,6 +5189,7 @@ CONFIG_DRM_PANEL=y
# Display Panels
#
# CONFIG_DRM_PANEL_SIMPLE is not set
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
@@ -5157,6 +5202,7 @@ CONFIG_DRM_BRIDGE=y
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=m
+# CONFIG_DRM_DUMB_VGA_DAC is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SII902X is not set
@@ -5164,6 +5210,7 @@ CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_I2C_ADV7511=m
# CONFIG_DRM_I2C_ADV7533 is not set
# CONFIG_DRM_ARCPGU is not set
+# CONFIG_DRM_LEGACY is not set
#
# Frame buffer Devices
@@ -5305,6 +5352,7 @@ CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
+CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
@@ -5558,6 +5606,7 @@ CONFIG_SND_SOC_INTEL_HASWELL=m
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
+CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
@@ -5568,13 +5617,6 @@ CONFIG_SND_SOC_INTEL_SKYLAKE=m
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
-
-#
-# Allwinner SoC Audio support
-#
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN4I_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
@@ -5606,6 +5648,7 @@ CONFIG_SND_SOC_AC97_CODEC=m
# CONFIG_SND_SOC_CS53L30 is not set
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
+CONFIG_SND_SOC_HDMI_CODEC=m
# CONFIG_SND_SOC_ES8328 is not set
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=m
@@ -5630,8 +5673,10 @@ CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
+CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
-# CONFIG_SND_SOC_RT5677_SPI is not set
+CONFIG_SND_SOC_RT5677=m
+CONFIG_SND_SOC_RT5677_SPI=m
# CONFIG_SND_SOC_SGTL5000 is not set
CONFIG_SND_SOC_SI476X=m
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
@@ -5672,10 +5717,12 @@ CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
+# CONFIG_SND_SOC_NAU8810 is not set
CONFIG_SND_SOC_NAU8825=m
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
@@ -5808,7 +5855,7 @@ CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_ULPI_BUS is not set
+CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
@@ -5887,13 +5934,12 @@ CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
+CONFIG_USBIP_VHCI_HC_PORTS=8
+CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
-CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
CONFIG_USB_MUSB_HDRC=m
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_DUAL_ROLE=y
+CONFIG_USB_MUSB_HOST=y
#
# Platform Glue Layer
@@ -5993,6 +6039,7 @@ CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HSIC_USB3503=m
+CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=m
CONFIG_UCSI=m
@@ -6011,85 +6058,9 @@ CONFIG_NOP_USB_XCEIV=m
CONFIG_TAHVO_USB=m
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=m
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-# CONFIG_U_SERIAL_CONSOLE is not set
-
-#
-# USB Peripheral Controller
-#
-CONFIG_USB_FUSB300=m
-# CONFIG_USB_FOTG210_UDC is not set
-CONFIG_USB_GR_UDC=m
-CONFIG_USB_R8A66597=m
-CONFIG_USB_PXA27X=m
-CONFIG_USB_MV_UDC=m
-CONFIG_USB_MV_U3D=m
-CONFIG_USB_M66592=m
-CONFIG_USB_BDC_UDC=m
-
-#
-# Platform Support
-#
-CONFIG_USB_BDC_PCI=m
-CONFIG_USB_AMD5536UDC=m
-CONFIG_USB_NET2272=m
-CONFIG_USB_NET2272_DMA=y
-CONFIG_USB_NET2280=m
-CONFIG_USB_GOKU=m
-CONFIG_USB_EG20T=m
-CONFIG_USB_GADGET_XILINX=m
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_LIBCOMPOSITE=m
-CONFIG_USB_F_ACM=m
-CONFIG_USB_U_SERIAL=m
-CONFIG_USB_U_ETHER=m
-CONFIG_USB_F_SERIAL=m
-CONFIG_USB_F_OBEX=m
-CONFIG_USB_F_NCM=m
-CONFIG_USB_F_ECM=m
-CONFIG_USB_F_SUBSET=m
-CONFIG_USB_F_RNDIS=m
-CONFIG_USB_F_MASS_STORAGE=m
-CONFIG_USB_F_FS=m
-CONFIG_USB_F_UAC2=m
-CONFIG_USB_F_UVC=m
-CONFIG_USB_F_MIDI=m
-CONFIG_USB_F_HID=m
-CONFIG_USB_F_PRINTER=m
-CONFIG_USB_F_TCM=m
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_AUDIO=m
-# CONFIG_GADGET_UAC1 is not set
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-CONFIG_USB_G_NCM=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FUNCTIONFS=m
-CONFIG_USB_FUNCTIONFS_ETH=y
-CONFIG_USB_FUNCTIONFS_RNDIS=y
-CONFIG_USB_FUNCTIONFS_GENERIC=y
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_GADGET_TARGET=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_MULTI is not set
-CONFIG_USB_G_HID=m
-CONFIG_USB_G_DBGP=m
-# CONFIG_USB_G_DBGP_PRINTK is not set
-CONFIG_USB_G_DBGP_SERIAL=y
-CONFIG_USB_G_WEBCAM=m
+# CONFIG_USB_GADGET is not set
CONFIG_USB_LED_TRIG=y
+# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
@@ -6187,6 +6158,7 @@ CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_KTD2692=m
+# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
@@ -6294,6 +6266,7 @@ CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
+# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
@@ -6303,7 +6276,6 @@ CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
-CONFIG_RTC_DRV_ISL12057=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=m
@@ -6403,7 +6375,7 @@ CONFIG_PCH_DMA=m
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
-CONFIG_DW_DMAC_PCI=m
+CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y
#
@@ -6416,12 +6388,14 @@ CONFIG_ASYNC_TX_DMA=y
# DMABUF options
#
CONFIG_SYNC_FILE=y
+# CONFIG_SW_SYNC is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
+# CONFIG_IMG_ASCII_LCD is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
@@ -6645,9 +6619,6 @@ CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_R8188EU=m
CONFIG_88EU_AP_MODE=y
-CONFIG_R8723AU=m
-CONFIG_8723AU_AP_MODE=y
-CONFIG_8723AU_BT_COEXIST=y
CONFIG_RTS5208=m
CONFIG_VT6655=m
CONFIG_VT6656=m
@@ -6776,7 +6747,6 @@ CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_LNET=m
CONFIG_LNET_MAX_PAYLOAD=1048576
CONFIG_LNET_SELFTEST=m
-CONFIG_LNET_XPRT_IB=m
CONFIG_LUSTRE_FS=m
CONFIG_LUSTRE_OBD_MAX_IOCTL_BUFFER=8192
# CONFIG_LUSTRE_DEBUG_EXPENSIVE_CHECK is not set
@@ -6795,6 +6765,7 @@ CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_ACT2000=m
# CONFIG_KS7010 is not set
+# CONFIG_GREYBUS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
@@ -6885,7 +6856,6 @@ CONFIG_COMMON_CLK_RK808=m
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_SUNXI_CCU is not set
#
# Hardware Spinlock drivers
@@ -6961,6 +6931,7 @@ CONFIG_EXTCON=m
# CONFIG_EXTCON_ARIZONA is not set
CONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=m
# CONFIG_EXTCON_USB_GPIO is not set
@@ -6982,12 +6953,15 @@ CONFIG_IIO_SW_TRIGGER=m
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
# CONFIG_BMC150_ACCEL is not set
+# CONFIG_DMARD06 is not set
+# CONFIG_DMARD09 is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=m
+# CONFIG_MC3230 is not set
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=m
@@ -7013,6 +6987,7 @@ CONFIG_MMA7660=m
# CONFIG_AD799X is not set
# CONFIG_HI8435 is not set
# CONFIG_INA2XX_ADC is not set
+# CONFIG_LTC2485 is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MCP320X is not set
@@ -7020,9 +6995,12 @@ CONFIG_MMA7660=m
# CONFIG_NAU7802 is not set
# CONFIG_QCOM_SPMI_IADC is not set
# CONFIG_QCOM_SPMI_VADC is not set
+# CONFIG_STX104 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
+# CONFIG_TI_ADC12138 is not set
# CONFIG_TI_ADC128S052 is not set
+# CONFIG_TI_ADC161S626 is not set
# CONFIG_TI_ADS1015 is not set
# CONFIG_TI_ADS8688 is not set
# CONFIG_TI_AM335X_ADC is not set
@@ -7074,12 +7052,13 @@ CONFIG_IIO_ST_SENSORS_CORE=m
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
+# CONFIG_CIO_DAC is not set
+# CONFIG_AD8801 is not set
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
-# CONFIG_STX104 is not set
# CONFIG_VF610_DAC is not set
#
@@ -7174,6 +7153,7 @@ CONFIG_RPR0521=m
# CONFIG_MAX44000 is not set
CONFIG_OPT3001=m
CONFIG_PA12203001=m
+# CONFIG_SI1145 is not set
CONFIG_STK3310=m
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
@@ -7186,6 +7166,7 @@ CONFIG_STK3310=m
#
# Magnetometer sensors
#
+# CONFIG_AK8974 is not set
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
# CONFIG_BMC150_MAGN_I2C is not set
@@ -7226,6 +7207,7 @@ CONFIG_IIO_TIGHTLOOP_TRIGGER=m
#
# Pressure sensors
#
+# CONFIG_BMP280 is not set
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_HP03 is not set
# CONFIG_MPL115_I2C is not set
@@ -7236,6 +7218,7 @@ CONFIG_IIO_TIGHTLOOP_TRIGGER=m
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
+# CONFIG_ZPA2326 is not set
#
# Lightning sensors
@@ -7251,6 +7234,7 @@ CONFIG_IIO_TIGHTLOOP_TRIGGER=m
#
# Temperature sensors
#
+# CONFIG_MAXIM_THERMOCOUPLE is not set
# CONFIG_MLX90614 is not set
# CONFIG_TMP006 is not set
# CONFIG_TSYS01 is not set
@@ -7273,7 +7257,16 @@ CONFIG_IPACK_BUS=m
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_ATH79 is not set
+# CONFIG_RESET_BERLIN is not set
+# CONFIG_RESET_LPC18XX is not set
+# CONFIG_RESET_MESON is not set
+# CONFIG_RESET_PISTACHIO is not set
+# CONFIG_RESET_SOCFPGA is not set
+# CONFIG_RESET_STM32 is not set
+# CONFIG_RESET_SUNXI is not set
# CONFIG_TI_SYSCON_RESET is not set
+# CONFIG_RESET_ZYNQ is not set
CONFIG_FMC=m
CONFIG_FMC_FAKEDEV=m
CONFIG_FMC_TRIVIAL=m
@@ -7309,9 +7302,19 @@ CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_DEV_DAX=m
+CONFIG_NR_DEV_DAX=32768
CONFIG_NVMEM=m
-# CONFIG_STM is not set
-# CONFIG_INTEL_TH is not set
+CONFIG_STM=m
+# CONFIG_STM_DUMMY is not set
+CONFIG_STM_SOURCE_CONSOLE=m
+CONFIG_STM_SOURCE_HEARTBEAT=m
+CONFIG_INTEL_TH=m
+CONFIG_INTEL_TH_PCI=m
+CONFIG_INTEL_TH_GTH=m
+CONFIG_INTEL_TH_STH=m
+CONFIG_INTEL_TH_MSU=m
+CONFIG_INTEL_TH_PTI=m
+# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
@@ -7344,6 +7347,7 @@ CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_CAPSULE_LOADER=m
+# CONFIG_EFI_TEST is not set
CONFIG_UEFI_CPER=y
#
@@ -7357,7 +7361,8 @@ CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXT4_ENCRYPTION=y
+CONFIG_EXT4_ENCRYPTION=y
+CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
@@ -7600,7 +7605,7 @@ CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
@@ -7610,15 +7615,7 @@ CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
CONFIG_CIFS_SMB311=y
CONFIG_CIFS_FSCACHE=y
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_SMALLDOS=y
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
@@ -7698,7 +7695,7 @@ CONFIG_DYNAMIC_DEBUG=y
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
@@ -7807,7 +7804,6 @@ CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
@@ -7828,6 +7824,7 @@ CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
+CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
@@ -7887,6 +7884,7 @@ CONFIG_TEST_KSTRTOX=m
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
@@ -7929,7 +7927,6 @@ CONFIG_DEFAULT_IO_DELAY_TYPE=0
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
-CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_KEY_DH_OPERATIONS=y
@@ -7972,7 +7969,7 @@ CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
@@ -8121,6 +8118,7 @@ CONFIG_CRYPTO_DEV_QAT_C62X=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
+CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
@@ -8234,7 +8232,6 @@ CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
@@ -8261,3 +8258,4 @@ CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
+CONFIG_SBITMAP=y
diff --git a/kernels/linux-libre-xen/net_handle_no_dst_on_skb_in_icmp6_send.patch b/kernels/linux-libre-xen/net_handle_no_dst_on_skb_in_icmp6_send.patch
deleted file mode 100644
index 06448a90a..000000000
--- a/kernels/linux-libre-xen/net_handle_no_dst_on_skb_in_icmp6_send.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 79dc7e3f1cd323be4c81aa1a94faa1b3ed987fb2 Mon Sep 17 00:00:00 2001
-From: David Ahern <dsa@cumulusnetworks.com>
-Date: Sun, 27 Nov 2016 18:52:53 -0800
-Subject: [PATCH] net: handle no dst on skb in icmp6_send
-
-Andrey reported the following while fuzzing the kernel with syzkaller:
-
-kasan: CONFIG_KASAN_INLINE enabled
-kasan: GPF could be caused by NULL-ptr deref or user memory access
-general protection fault: 0000 [#1] SMP KASAN
-Modules linked in:
-CPU: 0 PID: 3859 Comm: a.out Not tainted 4.9.0-rc6+ #429
-Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
-task: ffff8800666d4200 task.stack: ffff880067348000
-RIP: 0010:[<ffffffff833617ec>] [<ffffffff833617ec>]
-icmp6_send+0x5fc/0x1e30 net/ipv6/icmp.c:451
-RSP: 0018:ffff88006734f2c0 EFLAGS: 00010206
-RAX: ffff8800666d4200 RBX: 0000000000000000 RCX: 0000000000000000
-RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000018
-RBP: ffff88006734f630 R08: ffff880064138418 R09: 0000000000000003
-R10: dffffc0000000000 R11: 0000000000000005 R12: 0000000000000000
-R13: ffffffff84e7e200 R14: ffff880064138484 R15: ffff8800641383c0
-FS: 00007fb3887a07c0(0000) GS:ffff88006cc00000(0000) knlGS:0000000000000000
-CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
-CR2: 0000000020000000 CR3: 000000006b040000 CR4: 00000000000006f0
-Stack:
- ffff8800666d4200 ffff8800666d49f8 ffff8800666d4200 ffffffff84c02460
- ffff8800666d4a1a 1ffff1000ccdaa2f ffff88006734f498 0000000000000046
- ffff88006734f440 ffffffff832f4269 ffff880064ba7456 0000000000000000
-Call Trace:
- [<ffffffff83364ddc>] icmpv6_param_prob+0x2c/0x40 net/ipv6/icmp.c:557
- [< inline >] ip6_tlvopt_unknown net/ipv6/exthdrs.c:88
- [<ffffffff83394405>] ip6_parse_tlv+0x555/0x670 net/ipv6/exthdrs.c:157
- [<ffffffff8339a759>] ipv6_parse_hopopts+0x199/0x460 net/ipv6/exthdrs.c:663
- [<ffffffff832ee773>] ipv6_rcv+0xfa3/0x1dc0 net/ipv6/ip6_input.c:191
- ...
-
-icmp6_send / icmpv6_send is invoked for both rx and tx paths. In both
-cases the dst->dev should be preferred for determining the L3 domain
-if the dst has been set on the skb. Fallback to the skb->dev if it has
-not. This covers the case reported here where icmp6_send is invoked on
-Rx before the route lookup.
-
-Fixes: 5d41ce29e ("net: icmp6_send should use dst dev to determine L3 domain")
-Reported-by: Andrey Konovalov <andreyknvl@google.com>
-Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv6/icmp.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
-index 7370ad2..2772004 100644
---- a/net/ipv6/icmp.c
-+++ b/net/ipv6/icmp.c
-@@ -447,8 +447,10 @@ static void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info,
-
- if (__ipv6_addr_needs_scope_id(addr_type))
- iif = skb->dev->ifindex;
-- else
-- iif = l3mdev_master_ifindex(skb_dst(skb)->dev);
-+ else {
-+ dst = skb_dst(skb);
-+ iif = l3mdev_master_ifindex(dst ? dst->dev : skb->dev);
-+ }
-
- /*
- * Must not send error if the source does not uniquely