19 files changed, 1075 insertions, 0 deletions
diff --git a/pcr/openrc-base/1.0.6-dmcrypt.confd b/pcr/openrc-base/1.0.6-dmcrypt.confd
new file mode 100644
index 000000000..9747dff11
--- /dev/null
+++ b/pcr/openrc-base/1.0.6-dmcrypt.confd
@@ -0,0 +1,98 @@
+# /etc/conf.d/dmcrypt
+
+# For people who run dmcrypt on top of some other layer (like raid),
+# use rc_need to specify that requirement.  See the runscript(8) man
+# page for more information.
+
+#--------------------
+# Instructions
+#--------------------
+
+# Note regarding the syntax of this file.  This file is *almost* bash,
+# but each line is evaluated separately.  Separate swaps/targets can be
+# specified.  The init-script which reads this file assumes that a
+# swap= or target= line starts a new section, similar to lilo or grub
+# configuration.
+
+# Note when using gpg keys and /usr on a separate partition, you will
+# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly
+# and ensure that gpg has been compiled statically.
+# See http://bugs.gentoo.org/90482 for more information.
+
+# Note that the init-script which reads this file detects whether your
+# partition is LUKS or not. No mkfs is run unless you specify a makefs
+# option.
+
+# Global options:
+#----------------
+
+# Max number of checks to perform (1 per second)
+#dmcrypt_max_timeout=120
+
+# Arguments:
+#-----------
+# target=<name>                      == Mapping name for partition.
+# swap=<name>                        == Mapping name for swap partition.
+# source='<dev>'                     == Real device for partition.
+# key='</path/to/keyfile>[:<mode>]'  == Fullpath from / or from inside removable media.
+# remdev='<dev>'                     == Device that will be assigned to removable media.
+# gpg_options='<opts>'               == Default are --quiet --decrypt
+# options='<opts>'                   == cryptsetup, for LUKS you can only use --readonly
+# loop_file='<file>'                 == Loopback file.
+# pre_mount='cmds'                   == commands to execute before mounting partition.
+# post_mount='cmds'                  == commands to execute after mounting partition.
+#-----------
+# Supported Modes
+# gpg					== decrypt and pipe key into cryptsetup.
+#						Note: new-line character must not be part of key.
+#						Command to erase \n char: 'cat key | tr -d '\n' > cleanKey'
+
+#--------------------
+# dm-crypt examples
+#--------------------
+
+## swap
+# Swap partitions. These should come first so that no keys make their
+# way into unencrypted swap.
+# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom
+# If no makefs is given then mkswap will be assumed
+#swap=crypt-swap
+#source='/dev/hda2'
+
+## /home with passphrase
+#target=crypt-home
+#source='/dev/hda5'
+
+## /home with regular keyfile
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey'
+
+## /home with gpg protected key
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey:gpg'
+
+## /home with regular keyfile on removable media(such as usb-stick)
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey'
+#remdev='/dev/sda1'
+
+##/home with gpg protected key on removable media(such as usb-stick)
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey:gpg'
+#remdev='/dev/sda1'
+
+##/tmp with regular keyfile
+#target=crypt-tmp
+#source='/dev/hda6'
+#key='/full/path/to/tmpkey'
+#pre_mount='/sbin/mkreiserfs -f -f ${dev}'
+#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}'
+
+## Loopback file example
+#target='crypt-loop-home'
+#source='/dev/loop0'
+#loop_file='/mnt/crypt/home'
diff --git a/pcr/openrc-base/1.5.1-dmcrypt.rc b/pcr/openrc-base/1.5.1-dmcrypt.rc
new file mode 100644
index 000000000..9415a0bce
--- /dev/null
+++ b/pcr/openrc-base/1.5.1-dmcrypt.rc
@@ -0,0 +1,353 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/cryptsetup/files/1.5.1-dmcrypt.rc,v 1.2 2014/10/19 04:37:19 vapier Exp $
+
+depend() {
+	before checkfs fsck
+}
+
+# We support multiple dmcrypt instances based on $SVCNAME
+execute_hook="dm_crypt_execute_dmcrypt"
+# XXX: Should we drop this ?
+# execute_hook="dm_crypt_execute_localmount"
+conf_file="/etc/conf.d/${SVCNAME}"
+
+# Get splash helpers if available.
+if [ -e /sbin/splash-functions.sh ] ; then
+	. /sbin/splash-functions.sh
+fi
+
+# Setup mappings for an individual target/swap
+# Note: This relies on variables localized in the main body below.
+dm_crypt_execute_dmcrypt() {
+	local dev ret mode foo
+
+	if [ -n "${target}" ] ; then
+		# let user set options, otherwise leave empty
+		: ${options:=' '}
+	elif [ -n "${swap}" ] ; then
+		if cryptsetup isLuks ${source} 2>/dev/null ; then
+			ewarn "The swap you have defined is a LUKS partition. Aborting crypt-swap setup."
+			return
+		fi
+		target=${swap}
+		# swap contents do not need to be preserved between boots, luks not required.
+		# suspend2 users should have initramfs's init handling their swap partition either way.
+		: ${options:='-c aes -h sha1 -d /dev/urandom'}
+		: ${pre_mount:='mkswap ${dev}'}
+	else
+		return
+	fi
+	if [ "x${source#UUID}" != "x${source}" ]; then
+		source=${source#UUID=}
+		source="$(blkid -U ${source})"
+	fi
+	if [ -z "${source}" ] && [ ! -e "${source}" ] ; then
+		ewarn "source \"${source}\" for ${target} missing, skipping..."
+		return
+	fi
+
+	if [ -n "${loop_file}" ] ; then
+		dev="/dev/mapper/${target}"
+		ebegin "  Setting up loop device ${source}"
+		losetup ${source} ${loop_file}
+	fi
+
+	# cryptsetup:
+	# open   <device> <name>      # <device> is $source
+	# create <name>   <device>    # <name>   is $target
+	local arg1="create" arg2="${target}" arg3="${source}"
+	if cryptsetup isLuks ${source} 2>/dev/null ; then
+		arg1="open"
+		arg2="${source}"
+		arg3="${target}"
+	fi
+
+	# Older versions reported:
+	#	${target} is active:
+	# Newer versions report:
+	#	${target} is active[ and is in use.]
+	if cryptsetup status ${target} | egrep -q ' is active' ; then
+		einfo "dm-crypt mapping ${target} is already configured"
+		return
+	fi
+	splash svc_input_begin ${SVCNAME} >/dev/null 2>&1
+
+	# Handle keys
+	if [ -n "${key}" ] ; then
+		read_abort() {
+			# some colors
+			local ans savetty resettty
+			[ -z "${NORMAL}" ] && eval $(eval_ecolors)
+			einfon "  $1? (${WARN}yes${NORMAL}/${GOOD}No${NORMAL}) "
+			shift
+			# This is ugly as s**t.  But POSIX doesn't provide `read -t`, so
+			# we end up having to implement our own crap with stty/etc...
+			savetty=$(stty -g)
+			resettty='stty ${savetty}; trap - EXIT HUP INT TERM'
+			trap 'eval "${resettty}"' EXIT HUP INT TERM
+			stty -icanon
+			[ "${1}" = -t ] && stty min 0 time "$(( $2 * 10 ))"
+			ans=$(dd count=1 bs=1 2>/dev/null) || ans=''
+			eval "${resettty}"
+			if [ -z "${ans}" ] ; then
+				printf '\r'
+			else
+				echo
+			fi
+			case ${ans} in
+				[yY]) return 0;;
+				*) return 1;;
+			esac
+		}
+
+		# Notes: sed not used to avoid case where /usr partition is encrypted.
+		mode=${key/*:/} && ( [ "${mode}" = "${key}" ] || [ -z "${mode}" ] ) && mode=reg
+		key=${key/:*/}
+		case "${mode}" in
+		gpg|reg)
+			# handle key on removable device
+			if [ -n "${remdev}" ] ; then
+				# temp directory to mount removable device
+				local mntrem="${RC_SVCDIR}/dm-crypt-remdev.$$"
+				if [ ! -d "${mntrem}" ] ; then
+					if ! mkdir -p "${mntrem}" ; then
+						ewarn "${source} will not be decrypted ..."
+						einfo "Reason: Unable to create temporary mount point '${mntrem}'"
+						return
+					fi
+				fi
+				i=0
+				einfo "Please insert removable device for ${target}"
+				while [ ${i} -lt ${dmcrypt_max_timeout:-120} ] ; do
+					foo=""
+					if mount -n -o ro "${remdev}" "${mntrem}" 2>/dev/null >/dev/null ; then
+						# keyfile exists?
+						if [ ! -e "${mntrem}${key}" ] ; then
+							umount -n "${mntrem}"
+							rmdir "${mntrem}"
+							einfo "Cannot find ${key} on removable media."
+							read_abort "Abort" ${read_timeout:--t 1} && return
+						else
+							key="${mntrem}${key}"
+							break
+						fi
+					else
+						[ -e "${remdev}" ] \
+							&& foo="mount failed" \
+							|| foo="mount source not found"
+					fi
+					: $((i += 1))
+					read_abort "Stop waiting after $i attempts (${foo})" -t 1 && return
+				done
+			else    # keyfile ! on removable device
+				if [ ! -e "${key}" ] ; then
+					ewarn "${source} will not be decrypted ..."
+					einfo "Reason: keyfile ${key} does not exist."
+					return
+				fi
+			fi
+			;;
+		*)
+			ewarn "${source} will not be decrypted ..."
+			einfo "Reason: mode ${mode} is invalid."
+			return
+			;;
+		esac
+	else
+		mode=none
+	fi
+	ebegin "  ${target} using: ${options} ${arg1} ${arg2} ${arg3}"
+	if [ "${mode}" = "gpg" ] ; then
+		: ${gpg_options:='-q -d'}
+		# gpg available ?
+		if type -p gpg >/dev/null ; then
+			for i in 0 1 2 ; do
+				# paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected.
+				# save stdin stdout stderr "values"
+				gpg ${gpg_options} ${key} 2>/dev/null | cryptsetup ${options} ${arg1} ${arg2} ${arg3}
+				ret=$?
+				[ ${ret} -eq 0 ] && break
+			done
+			eend ${ret} "failure running cryptsetup"
+		else
+			ewarn "${source} will not be decrypted ..."
+			einfo "Reason: cannot find gpg application."
+			einfo "You have to install app-crypt/gnupg first."
+			einfo "If you have /usr on its own partition, try copying gpg to /bin ."
+		fi
+	else
+		if [ "${mode}" = "reg" ] ; then
+			cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3}
+			ret=$?
+			eend ${ret} "failure running cryptsetup"
+		else
+			cryptsetup ${options} ${arg1} ${arg2} ${arg3}
+			ret=$?
+			eend ${ret} "failure running cryptsetup"
+		fi
+	fi
+	if [ -d "${mntrem}" ] ; then
+		umount -n ${mntrem} 2>/dev/null >/dev/null
+		rmdir ${mntrem} 2>/dev/null >/dev/null
+	fi
+	splash svc_input_end ${SVCNAME} >/dev/null 2>&1
+
+	if [ ${ret} -ne 0 ] ; then
+		cryptfs_status=1
+	else
+		if [ -n "${pre_mount}" ] ; then
+			dev="/dev/mapper/${target}"
+			ebegin "    pre_mount: ${pre_mount}"
+			eval "${pre_mount}" > /dev/null
+			ewend $? || cryptfs_status=1
+		fi
+	fi
+}
+
+# Run any post_mount commands for an individual mount
+#
+# Note: This relies on variables localized in the main body below.
+dm_crypt_execute_localmount() {
+	local mount_point
+
+	[ -z "${target}" ] && [ -z "${post_mount}" ] && return
+
+	if ! cryptsetup status ${target} | egrep -q '\<active:' ; then
+		ewarn "Skipping unmapped target ${target}"
+		cryptfs_status=1
+		return
+	fi
+
+	mount_point=$(grep "/dev/mapper/${target}" /proc/mounts | cut -d' ' -f2)
+	if [ -z "${mount_point}" ] ; then
+		ewarn "Failed to find mount point for ${target}, skipping"
+		cryptfs_status=1
+	fi
+
+	if [ -n "${post_mount}" ] ; then
+		ebegin "Running post_mount commands for target ${target}"
+		eval "${post_mount}" >/dev/null
+		eend $? || cryptfs_status=1
+	fi
+}
+
+# Lookup optional bootparams
+get_bootparam_val() {
+	# We're given something like:
+	#    foo=bar=cow
+	# Return the "bar=cow" part.
+	case $1 in
+	*\=*)
+		local key=$(echo "$1" | cut -f1 -d=)
+		echo "$1" | cut -c $(( ${#key} + 2 ))
+		;;
+	esac
+}
+
+start() {
+	local header=true cryptfs_status=0
+	local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev
+
+	local x
+	for x in $(cat /proc/cmdline) ; do
+		case "${x}" in
+		key_timeout\=*)
+			local KEY_TIMEOUT=$(get_bootparam_val "${x}")
+			if [ ${KEY_TIMEOUT} -gt 0 ] ; then
+				read_timeout="-t ${KEY_TIMEOUT}"
+			fi
+		;;
+		esac
+	done
+
+	while read -u 3 targetline ; do
+		case ${targetline} in
+		# skip comments and blank lines
+		""|"#"*) continue ;;
+		# skip service-specific openrc configs #377927
+		rc_*) continue ;;
+		esac
+
+		${header} && ebegin "Setting up dm-crypt mappings"
+		header=false
+
+		# check for the start of a new target/swap
+		case ${targetline} in
+		target=*|swap=*)
+			# If we have a target queued up, then execute it
+			${execute_hook}
+
+			# Prepare for the next target/swap by resetting variables
+			unset gpg_options key loop_file target options pre_mount post_mount source swap remdev
+			;;
+
+		gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*)
+			if [ -z "${target}${swap}" ] ; then
+				ewarn "Ignoring setting outside target/swap section: ${targetline}"
+				continue
+			fi
+			;;
+
+		dmcrypt_max_timeout=*)
+			# ignore global options
+			continue
+			;;
+
+		*)
+			ewarn "Skipping invalid line in ${conf_file}: ${targetline}"
+			;;
+		esac
+
+		# Queue this setting for the next call to dm_crypt_execute_xxx
+		eval "${targetline}"
+	done 3< ${conf_file}
+
+	# If we have a target queued up, then execute it
+	${execute_hook}
+
+	ewend ${cryptfs_status} "Failed to setup dm-crypt devices"
+}
+
+stop() {
+	local line header
+
+	# Break down all mappings
+	header=true
+	egrep "^(target|swap)=" ${conf_file} | \
+	while read line ; do
+		${header} && einfo "Removing dm-crypt mappings"
+		header=false
+
+		target= swap=
+		eval ${line}
+
+		[ -n "${swap}" ] && target=${swap}
+		if [ -z "${target}" ] ; then
+			ewarn "invalid line in ${conf_file}: ${line}"
+			continue
+		fi
+
+		ebegin "  ${target}"
+		cryptsetup remove ${target}
+		eend $?
+	done
+
+	# Break down loop devices
+	header=true
+	grep '^source=./dev/loop' ${conf_file} | \
+	while read line ; do
+		${header} && einfo "Detaching dm-crypt loop devices"
+		header=false
+
+		source=
+		eval ${line}
+
+		ebegin "  ${source}"
+		losetup -d "${source}"
+		eend $?
+	done
+
+	return 0
+}
diff --git a/pcr/openrc-base/anacron-1.0-initd b/pcr/openrc-base/anacron-1.0-initd
new file mode 100644
index 000000000..6462b900e
--- /dev/null
+++ b/pcr/openrc-base/anacron-1.0-initd
@@ -0,0 +1,18 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-process/cronie/files/anacron-1.0-initd,v 1.4 2014/03/04 00:17:58 polynomial-c Exp $
+
+# anacron forks itself when -d gets omitted. So s-s-d fails to create a valid
+# pidfile. DO NOT remove -d from command_args and let s-s-d start anacron
+# in background!
+
+command="/usr/sbin/anacron"
+command_args="-d -s -S /var/spool/anacron"
+pidfile="/var/run/anacron.pid"
+command_background="true"
+
+depend() {
+	use clock logger
+	need localmount
+}
diff --git a/pcr/openrc-base/cronie-1.3-initd b/pcr/openrc-base/cronie-1.3-initd
new file mode 100644
index 000000000..138530f5e
--- /dev/null
+++ b/pcr/openrc-base/cronie-1.3-initd
@@ -0,0 +1,14 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-process/cronie/files/cronie-1.3-initd,v 1.3 2014/03/04 00:17:58 polynomial-c Exp $
+
+command="/usr/sbin/crond"
+command_args="${CRONDARGS}"
+pidfile="/var/run/crond.pid"
+
+depend() {
+	use clock logger
+	need localmount
+	provide cron	
+}
diff --git a/pcr/openrc-base/dbus.initd b/pcr/openrc-base/dbus.initd
new file mode 100644
index 000000000..65271f69c
--- /dev/null
+++ b/pcr/openrc-base/dbus.initd
@@ -0,0 +1,50 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2 or later
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/dbus/files/dbus.initd,v 1.1 2011/11/05 13:56:10 ssuominen Exp $
+
+extra_started_commands="reload"
+
+depend() {
+	need localmount
+	after bootmisc
+}
+
+start() {
+	ebegin "Starting D-BUS system messagebus"
+	/usr/bin/dbus-uuidgen --ensure=/etc/machine-id
+
+	# We need to test if /var/run/dbus exists, since script will fail if it does not
+	[ ! -e /var/run/dbus ] && mkdir /var/run/dbus 
+
+	start-stop-daemon --start --pidfile /var/run/dbus.pid --exec /usr/bin/dbus-daemon -- --system
+	eend $?
+}
+
+stop() {
+	local retval
+
+	ebegin "Stopping D-BUS system messagebus"
+
+	start-stop-daemon --stop --pidfile /var/run/dbus.pid
+	retval=$?
+
+	eend ${retval}
+
+	[ -S /var/run/dbus/system_bus_socket ] && rm -f /var/run/dbus/system_bus_socket
+
+	return ${retval}
+}
+
+reload() {
+	local retval
+
+	ebegin "Reloading D-BUS messagebus config"
+	
+	/usr/bin/dbus-send --print-reply --system --type=method_call \
+			--dest=org.freedesktop.DBus \
+			/ org.freedesktop.DBus.ReloadConfig > /dev/null
+	retval=$?
+	eend ${retval}
+	return ${retval}
+}
diff --git a/pcr/openrc-base/device-mapper.conf-1.02.22-r3 b/pcr/openrc-base/device-mapper.conf-1.02.22-r3
new file mode 100644
index 000000000..bc7a25158
--- /dev/null
+++ b/pcr/openrc-base/device-mapper.conf-1.02.22-r3
@@ -0,0 +1 @@
+RC_AFTER="lvm"
diff --git a/pcr/openrc-base/device-mapper.rc-2.02.105-r2 b/pcr/openrc-base/device-mapper.rc-2.02.105-r2
new file mode 100644
index 000000000..56e75037e
--- /dev/null
+++ b/pcr/openrc-base/device-mapper.rc-2.02.105-r2
@@ -0,0 +1,147 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/device-mapper.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $
+
+depend() {
+	# As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that
+	# means dmeventd is NOT notified, as it cannot be safely running
+	before dmeventd checkfs fsck
+	after modules
+}
+
+dm_in_proc() {
+	local retval=0
+	for x in devices misc ; do
+		grep -qs 'device-mapper' /proc/${x}
+		retval=$((${retval} + $?))
+	done
+	return ${retval}
+}
+
+# char **build_dmsetup_command(volume)
+#
+# Returns complete dmsetup command given single volume name
+build_dmsetup_command() {
+	local count dmsetup_cmd
+	
+	# Number of lines mentioning volume name
+	count=$(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | grep -c ${1})
+	
+	# If there's just one line:
+	if [ ${count} -eq 1 ] ; then
+		echo "echo $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \
+			  grep ${1} | awk '{$1=""; print $0}') | /sbin/dmsetup create ${1}"
+			  
+	# For all cases with more lines:
+	elif [ ${count} -gt 1 ] ; then
+		for c in $( seq 1 ${count} ) ; do
+			if [ ${c} -eq 1 ] ; then
+				# Heavy escaping in awk-statement because we cannot use apostrophes
+				dmsetup_cmd="echo -e $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \
+							 grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})"
+			else
+				# Append starting with newline
+				dmsetup_cmd="${dmsetup_cmd}\\\\n \
+							 $(grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \
+							 grep ${1} | awk NR==${c}\ \{\$1=\"\"\;\ print\ \$0\})"
+			fi
+		done
+		echo "${dmsetup_cmd} | /sbin/dmsetup create ${1}"
+	fi
+
+	return 0
+}
+
+# char **get_new_dm_volumes(void)
+#
+#   Return unique volumes from /etc/dmtab
+get_new_dm_volumes() {
+	local volume
+
+	# Filter comments and blank lines
+	grep -v -e '^[[:space:]]*\(#\|$\)' /etc/dmtab | \
+	awk '{ print $1 }' | \
+	uniq | \
+	while read volume ; do
+		# If it exists, skip it
+		dmvolume_exists "${volume%:}" && continue
+
+		echo "${volume%:}"
+	done
+
+	return 0
+}
+
+# int dmvolume_exists(volume)
+#
+#   Return true if volume exists in DM table
+dmvolume_exists() {
+	local x line volume=$1
+
+	[ -z "${volume}" ] && return 1
+
+	/sbin/dmsetup ls 2>/dev/null | \
+	while read line ; do
+		for x in ${line} ; do
+			# the following conditonal return only breaks out
+			# of the while loop, as it is running in a pipe.
+			[ "${x}" = "${volume}" ] && return 1
+			# We only want to check the volume name
+			break
+		done
+	done
+
+	# if 1 was returned from the above loop, then indicate that
+	# volume exists
+	[ $? = 1 ] && return 0
+
+	# otherwise the loop exited normally and the volume does not
+	# exist
+	return 1
+}
+
+# int is_empty_dm_volume(volume)
+#
+#   Return true if the volume exists in DM table, but is empty/non-valid
+is_empty_dm_volume() {
+	local table volume=$1
+
+	set -- $(/sbin/dmsetup table 2>/dev/null | grep -e "^${volume}:")
+	[ "${volume}" = "$1" -a -z "$2" ]
+}
+
+
+start() {
+	if [ -e /proc/modules ] && ! dm_in_proc ; then
+		modprobe dm-mod 2>/dev/null
+	fi
+	# Ensure the dirs exist for locking and running
+	checkpath -q -d -m 0700 -o root:root /run/lvm /run/lock/lvm
+
+	local x volume
+	
+	if [ -x /sbin/dmsetup -a -c /dev/mapper/control -a -f /etc/dmtab ] ; then
+		[ -n "$(get_new_dm_volumes)" ] && \
+			einfo " Setting up device-mapper volumes:"
+		
+		get_new_dm_volumes | \
+		while read x ; do
+			[ -n "${x}" ] || continue
+			
+			volume="${x##* }"
+			
+			ebegin "  Creating volume: ${volume}"
+			if ! eval $(build_dmsetup_command ${volume}) >/dev/null 2>/dev/null ; then
+				eend 1 "  Error creating volume: ${volume}"
+				# dmsetup still adds an empty volume in some cases,
+				#  so lets remove it
+				is_empty_dm_volume "${volume}" && \
+					/sbin/dmsetup remove "${volume}" 2>/dev/null
+			else
+				eend 0
+			fi
+		done
+	fi
+}
+
diff --git a/pcr/openrc-base/dhcpcd.initd b/pcr/openrc-base/dhcpcd.initd
new file mode 100644
index 000000000..d88b0610d
--- /dev/null
+++ b/pcr/openrc-base/dhcpcd.initd
@@ -0,0 +1,17 @@
+#!/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=/sbin/dhcpcd
+pidfile=/var/run/dhcpcd.pid
+command_args=-q
+name="DHCP Client Daemon"
+
+depend()
+{
+	provide net
+	need localmount
+	use logger network
+	after bootmisc modules
+	before dns
+}
diff --git a/pcr/openrc-base/dmeventd.initd-2.02.67-r1 b/pcr/openrc-base/dmeventd.initd-2.02.67-r1
new file mode 100644
index 000000000..3c2f5f327
--- /dev/null
+++ b/pcr/openrc-base/dmeventd.initd-2.02.67-r1
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/dmeventd.initd-2.02.67-r1,v 1.3 2014/02/08 21:17:46 robbat2 Exp $
+
+PIDFILE=/run/dmeventd.pid
+BIN=/sbin/dmeventd
+
+depend() {
+	# As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that
+	# means dmeventd is NOT notified, as it cannot be safely running
+	after lvm device-mapper
+}
+
+start() {
+	ebegin "Starting dmeventd"
+	start-stop-daemon --start --exec $BIN --pidfile $PIDFILE
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping dmeventd"
+	start-stop-daemon --stop --exec $BIN --pidfile $PIDFILE
+	eend $?
+}
+
diff --git a/pcr/openrc-base/lvm-monitoring.initd-2.02.105-r2 b/pcr/openrc-base/lvm-monitoring.initd-2.02.105-r2
new file mode 100644
index 000000000..c53a60465
--- /dev/null
+++ b/pcr/openrc-base/lvm-monitoring.initd-2.02.105-r2
@@ -0,0 +1,39 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm-monitoring.initd-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $
+
+# This script is based on upstream file
+# LVM2.2.02.67/scripts/lvm2_monitoring_init_red_hat.in
+
+depend() {
+	# As of .67-r1, we call ALL lvm start/stop scripts with --sysinit, that
+	# means dmeventd is NOT notified, as it cannot be safely running
+	need lvm dmeventd
+}
+
+VGCHANGE=/sbin/vgchange
+VGS=/sbin/vgs
+
+start() {
+	ret=0
+	# TODO do we want to separate out already active groups only?
+	VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null`
+	ebegin "Starting LVM monitoring for VGs ${VGSLIST}:"
+	$VGCHANGE --monitor y --poll y  ${VGSLIST}
+	ret=$?
+	eend $ret
+	return $ret
+
+}
+
+stop() {
+	ret=0
+	# TODO do we want to separate out already active groups only?
+	VGSLIST=`$VGS --noheadings -o name --rows 2> /dev/null`
+	ebegin "Stopping LVM monitoring for VGs ${VGSLIST}:"
+	$VGCHANGE --monitor n ${VGSLIST}
+	ret=$?
+	eend $ret
+	return $ret
+}
diff --git a/pcr/openrc-base/lvm.confd-2.02.28-r2 b/pcr/openrc-base/lvm.confd-2.02.28-r2
new file mode 100644
index 000000000..2fbd8668c
--- /dev/null
+++ b/pcr/openrc-base/lvm.confd-2.02.28-r2
@@ -0,0 +1,5 @@
+# LVM should normally only be started after mdraid is available
+# this is because LVM physical volumes are very often MD devices.
+RC_AFTER="mdraid"
+
+# vim: ft=gentoo-conf-d
diff --git a/pcr/openrc-base/lvm.rc-2.02.105-r2 b/pcr/openrc-base/lvm.rc-2.02.105-r2
new file mode 100644
index 000000000..7fdf50e18
--- /dev/null
+++ b/pcr/openrc-base/lvm.rc-2.02.105-r2
@@ -0,0 +1,97 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvm.rc-2.02.105-r2,v 1.1 2014/02/02 19:52:34 robbat2 Exp $
+
+depend() {
+	before checkfs fsck
+	after modules device-mapper
+	need lvmetad sysfs
+}
+
+config='global { locking_dir = "/run/lock/lvm" }'
+
+dm_in_proc() {
+	local retval=0
+	for x in devices misc ; do
+		grep -qs 'device-mapper' /proc/${x}
+		retval=$((${retval} + $?))
+	done
+	return ${retval}
+}
+
+start() {
+	# LVM support for /usr, /home, /opt ....
+	# This should be done *before* checking local
+	# volumes, or they never get checked.
+	
+	# NOTE: Add needed modules for LVM or RAID, etc
+	#       to /etc/modules.autoload if needed
+	for lvm_path in /bin/lvm /sbin/lvm ; do
+		[ -x "$lvm_path" ] && break
+	done
+	if [ ! -x "$lvm_path" ]; then
+		eerror "Cannot find lvm binary in /sbin or /bin!"
+		return 1
+	fi
+	if [ -z "${CDBOOT}" ] ; then
+		if [ -e /proc/modules ] && ! dm_in_proc ; then
+			modprobe dm-mod 2>/dev/null
+		fi
+		if [ -d /proc/lvm ] || dm_in_proc ; then
+			ebegin "Setting up the Logical Volume Manager"
+			#still echo stderr for debugging
+			lvm_commands="#! ${lvm_path} --config '${config}'\n"
+			# Extra PV find pass because some devices might not have been available until very recently
+			lvm_commands="${lvm_commands}pvscan\n"
+			# Now make the nodes
+			lvm_commands="${lvm_commands}vgscan --mknodes\n"
+			# And turn them on!
+			lvm_commands="${lvm_commands}vgchange --sysinit -a ly\n"
+			# Order of this is important, have to work around dash and LVM readline
+			printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
+			eend $? "Failed to setup the LVM"
+		fi
+	fi
+}
+
+stop() {
+	for lvm_path in /bin/lvm /sbin/lvm ; do
+		[ -x "$lvm_path" ] && break
+	done
+	if [ ! -x "$lvm_path" ]; then
+		eerror "Cannot find lvm binary in /sbin or /bin!"
+		return 1
+	fi
+# Stop LVM2
+if [ -x /sbin/vgs ] && \
+   [ -x /sbin/vgchange ] && \
+   [ -x /sbin/lvchange ] && \
+   [ -f /etc/lvmtab -o -d /etc/lvm ] && \
+   [ -d /proc/lvm  -o "`grep device-mapper /proc/misc 2>/dev/null`" ]
+then
+	einfo "Shutting down the Logical Volume Manager"
+	
+
+        VGS=$($lvm_path vgs --config "${config}" -o vg_name --noheadings --nosuffix --rows 2> /dev/null)
+
+        if [ "$VGS" ]
+        then
+            ebegin "  Shutting Down LVs & VGs"
+			#still echo stderr for debugging
+			lvm_commands="#! ${lvm_path} --config '${config}'\n"
+			# Extra PV find pass because some devices might not have been available until very recently
+			lvm_commands="${lvm_commands}lvchange --sysinit -a ln ${VGS}\n"
+			# Now make the nodes
+			lvm_commands="${lvm_commands}vgchange --sysinit -a ln ${VGS}\n"
+			# Order of this is important, have to work around dash and LVM readline
+			printf "%b\n" "${lvm_commands}" | $lvm_path /proc/self/fd/0 --config "${config}" >/dev/null
+			eend $? "Failed (possibly some LVs still needed for /usr or root)"
+        fi
+
+	einfo "Finished shutting down the Logical Volume Manager"
+	return 0
+fi
+}
+
+# vim:ts=4
diff --git a/pcr/openrc-base/lvmetad.initd-2.02.105-r2 b/pcr/openrc-base/lvmetad.initd-2.02.105-r2
new file mode 100644
index 000000000..e16d55c46
--- /dev/null
+++ b/pcr/openrc-base/lvmetad.initd-2.02.105-r2
@@ -0,0 +1,13 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/lvm2/files/lvmetad.initd-2.02.105-r2,v 1.2 2014/02/08 21:17:46 robbat2 Exp $
+
+pidfile="/run/lvmetad.pid"
+command="/sbin/lvmetad"
+command_args="${LVMETAD_OPTS:=-p ${pidfile}}"
+start_stop_daemon_args="--pidfile ${pidfile}"
+
+depend() {
+	:
+}
diff --git a/pcr/openrc-base/mdadm.confd b/pcr/openrc-base/mdadm.confd
new file mode 100644
index 000000000..a4ead14dc
--- /dev/null
+++ b/pcr/openrc-base/mdadm.confd
@@ -0,0 +1,7 @@
+# /etc/conf.d/mdadm: config file for /etc/init.d/mdadm
+
+# Misc options to pass to mdadm in monitor mode.
+# For more info, run `mdadm --monitor --help` or see
+# the mdadm(8) manpage.
+
+MDADM_OPTS="--syslog"
diff --git a/pcr/openrc-base/mdadm.rc b/pcr/openrc-base/mdadm.rc
new file mode 100644
index 000000000..c30004d0b
--- /dev/null
+++ b/pcr/openrc-base/mdadm.rc
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 1999-2006 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/mdadm/files/mdadm.rc,v 1.2 2006/04/25 05:41:51 vapier Exp $
+
+depend() {
+	use logger dns net
+}
+
+start() {
+	ebegin "Starting mdadm monitor"
+	mdadm --monitor --scan \
+		--daemonise \
+		--pid-file /var/run/mdadm.pid \
+		${MDADM_OPTS}
+	eend $?
+}
+
+stop() {
+	local ret
+	ebegin "Stopping mdadm monitor"
+	start-stop-daemon --stop --pidfile /var/run/mdadm.pid
+	ret=$?
+	rm -f /var/run/mdadm.pid
+	eend ${ret}
+}
diff --git a/pcr/openrc-base/mdraid.confd b/pcr/openrc-base/mdraid.confd
new file mode 100644
index 000000000..daa17abd8
--- /dev/null
+++ b/pcr/openrc-base/mdraid.confd
@@ -0,0 +1,5 @@
+# /etc/conf.d/mdraid: config file for /etc/init.d/mdraid
+
+# For people who run raid on top of some other layer (like
+# dmcrypt), use rc_need to specify that requirement.  See
+# the runscript(8) man page for more information.
diff --git a/pcr/openrc-base/mdraid.rc b/pcr/openrc-base/mdraid.rc
new file mode 100644
index 000000000..27421e26e
--- /dev/null
+++ b/pcr/openrc-base/mdraid.rc
@@ -0,0 +1,40 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/mdadm/files/mdraid.rc,v 1.6 2011/11/12 21:06:44 vapier Exp $
+
+depend() {
+	before checkfs fsck
+	after modules
+}
+
+start() {
+	local output
+
+	ebegin "Starting up RAID devices"
+	output=$(mdadm -As 2>&1)
+	eend $? "${output}"
+
+	local pat="/dev/md_d*"
+	set -- ${pat}
+	if [ "$*" != "${pat}" ] ; then
+		ebegin "Creating RAID device partitions"
+		blockdev "$@"
+		eend $?
+		# wait because vgscan runs next, and we want udev to fire
+		sleep 1
+	fi
+
+	return 0
+}
+
+stop() {
+	local output
+
+	# XXX: Maybe drop this check ?
+	[ ! -e /etc/mdadm/mdadm.conf ] && [ ! -e /etc/mdadm.conf ] && return 0
+
+	ebegin "Shutting down RAID devices (mdadm)"
+	output=$(mdadm -Ss 2>&1)
+	eend $? "${output}"
+}
diff --git a/pcr/openrc-base/nscd b/pcr/openrc-base/nscd
new file mode 100644
index 000000000..b102de070
--- /dev/null
+++ b/pcr/openrc-base/nscd
@@ -0,0 +1,64 @@
+#!/sbin/runscript
+# Copyright 1999-2005 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-libs/glibc/files/nscd,v 1.7 2007/02/23 12:09:39 uberlord Exp $
+
+depend() {
+	use dns ldap net slapd
+}
+
+checkconfig() {
+	if [ ! -d /var/run/nscd ] ; then
+		mkdir -p /var/run/nscd
+		chmod 755 /var/run/nscd
+	fi
+	if [ -z "${NSCD_PERMS_OK}" ] && [ "$(stat -c %a /var/run/nscd)" != "755" ] ; then
+		echo ""
+		ewarn "nscd run dir is not world readable, you should reset the perms:"
+		ewarn "chmod 755 /var/run/nscd"
+		ewarn "chmod a+rw /var/run/nscd/socket"
+		echo ""
+		ewarn "To disable this warning, set 'NSCD_PERMS_OK' in /etc/conf.d/nscd"
+		echo ""
+	fi
+}
+
+start() {
+	checkconfig
+
+	ebegin "Starting Name Service Cache Daemon"
+	local secure=`while read curline ; do
+		table=${curline%:*}
+		entries=${curline##$table:}
+		table=${table%%[^a-z]*}
+		case $table in
+			passwd*|group*|hosts)
+			for entry in $entries ; do
+			case $entry in
+				nisplus*)
+					/usr/sbin/nscd_nischeck $table || \
+					/echo "-S $table,yes"
+				;;
+			esac
+			done
+		;;
+		esac
+		done < /etc/nsswitch.conf`
+	local pidfile="$(strings /usr/sbin/nscd | grep nscd.pid)"
+	mkdir -p "$(dirname ${pidfile})"
+	save_options pidfile "${pidfile}"
+	start-stop-daemon --start --quiet \
+		--exec /usr/sbin/nscd --pidfile "${pidfile}" \
+		-- $secure
+	eend $?
+}
+
+stop() {
+	local pidfile="$(get_options pidfile)"
+	[ -n "${pidfile}" ] && pidfile="--pidfile ${pidfile}"
+	ebegin "Shutting down Name Service Cache Daemon"
+	start-stop-daemon --stop --quiet --exec /usr/sbin/nscd ${pidfile}
+	eend $?
+}
+
+# vim:ts=4
diff --git a/pcr/openrc-base/udev-postmount b/pcr/openrc-base/udev-postmount
new file mode 100644
index 000000000..e433736db
--- /dev/null
+++ b/pcr/openrc-base/udev-postmount
@@ -0,0 +1,55 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+depend()
+{
+	need localmount
+	keyword -vserver -lxc
+}
+
+dir_writeable()
+{
+        touch "$1"/.test.$$ 2>/dev/null && rm "$1"/.test.$$
+}
+
+# store persistent-rules that got created while booting
+# when / was still read-only
+store_persistent_rules()
+{
+	# create /etc/udev/rules.d if it does not exist and /etc/udev is writable
+	[ -d /etc/udev/rules.d ] || \
+		dir_writeable /etc/udev && \
+		mkdir -p /etc/udev/rules.d
+
+	# only continue if rules-directory is writable
+	dir_writeable /etc/udev/rules.d || return 0
+
+	local file dest
+	for file in /run/udev/tmp-rules--*; do
+		dest=${file##*tmp-rules--}
+		[ "$dest" = '*' ] && break
+		type=${dest##70-persistent-}
+		type=${type%%.rules}
+		ebegin "Saving udev persistent ${type} rules to /etc/udev/rules.d"
+		cat "$file" >> /etc/udev/rules.d/"$dest" && rm -f "$file"
+		eend $? "Failed moving persistent rules!"
+	done
+}
+
+start()
+{
+	# check if this system uses udev
+	[ -d /run/udev ] || return 0
+
+	# store persistent-rules that got created while booting
+	# when / was still read-only
+	store_persistent_rules
+}
+
+stop()
+{
+	return 0
+}
+
+# vim:ts=4