pcr/apertium: updated to 3.4.2

4 files changed, 0 insertions, 683 deletions

diff --git a/pcr/apertium/apertium-en-es/Makefile.am.patch b/pcr/apertium/apertium-en-es/Makefile.am.patch
deleted file mode 100644
index 29a51cfed..000000000
--- a/pcr/apertium/apertium-en-es/Makefile.am.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- apertium-en-es-0.8.0/Makefile.am	2011-08-03 20:20:35.000000000 +0200
-+++ src/apertium-en-es-0.8.0/Makefile.am	2014-10-06 10:41:50.408342594 +0200
-@@ -21,7 +21,7 @@
- 		 $(BASENAME).$(PREFIX1)-lextor.dix $(BASENAME).$(PREFIX2)-lextor.dix
- 
- 
--TARGETS = $(TARGETS_COMMON) 
-+TARGETS = $(TARGETS_COMMON)
- 
- $(BASENAME).$(LANG1)-lextor.dix: $(BASENAME).$(PREFIX1).dix
- 	apertium-validate-dictionary $(BASENAME).$(PREFIX1).dix
-@@ -61,8 +61,8 @@
- 	lt-comp lr .deps/$(LANG1).dix $@ $(BASENAME).$(LANG1).acx
- 
- #$(PREFIX1).automorf.bin: $(BASENAME).$(LANG1).metadix $(BASENAME).$(LANG1).acx
--#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp1gen.xsl 	 
--#	@xsltproc tmp1gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp1 
-+#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp1gen.xsl
-+#	@xsltproc tmp1gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp1
- #	@rm tmp1gen.xsl
- #	apertium-validate-acx $(BASENAME).$(LANG1).acx
- #	apertium-validate-dictionary $(BASENAME).$(LANG1).dixtmp1
-@@ -106,15 +106,15 @@
- 	lt-comp rl .deps/$(LANG1b).dix $@
- 
- #$(PREFIX2).autogen.bin: $(BASENAME).$(LANG1).metadix
--#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp2gen.xsl 	 
-+#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp2gen.xsl
- #	@xsltproc tmp2gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp2
- #	@rm tmp2gen.xsl
- #	apertium-validate-dictionary $(BASENAME).$(LANG1).dixtmp2
- #	lt-comp rl $(BASENAME).$(LANG1).dixtmp2 $@
- #	@rm $(BASENAME).$(LANG1).dixtmp2
- #	@rm $(BASENAME).$(LANG1).metadix
--#	@rm $(BASENAME).$(LANG2).dix	
--#	@rm $(BASENAME).$(LANG1)-$(LANG2).dix	
-+#	@rm $(BASENAME).$(LANG2).dix
-+#	@rm $(BASENAME).$(LANG1)-$(LANG2).dix
- 
- $(PREFIX2).autopgen.bin: $(BASENAME).post-$(LANG1).dix
- 	apertium-validate-dictionary $(BASENAME).post-$(LANG1).dix
-@@ -207,13 +207,13 @@
- 
- install-data-local:
- 	apertium-gen-modes modes.xml apertium-$(PREFIX1)
--	$(INSTALL_DATA) $(PREFIX1).mode $(apertium_en_modesdir)
--	$(INSTALL_DATA) $(PREFIX2).mode $(apertium_en_modesdir)
--	$(INSTALL_DATA) $(PREFIX2b).mode $(apertium_en_modesdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).genitive.t1x $(apertium_en_esdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t1x $(BASENAME).$(PREFIX1).t2x $(apertium_en_esdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t3x $(BASENAME).$(PREFIX2).t1x $(apertium_en_esdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX2).t2x $(BASENAME).$(PREFIX2).t3x $(apertium_en_esdir)
-+	$(INSTALL_DATA) $(PREFIX1).mode $(DESTDIR)$(apertium_en_modesdir)
-+	$(INSTALL_DATA) $(PREFIX2).mode $(DESTDIR)$(apertium_en_modesdir)
-+	$(INSTALL_DATA) $(PREFIX2b).mode $(DESTDIR)$(apertium_en_modesdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).genitive.t1x $(DESTDIR)$(apertium_en_esdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t1x $(BASENAME).$(PREFIX1).t2x $(DESTDIR)$(apertium_en_esdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t3x $(BASENAME).$(PREFIX2).t1x $(DESTDIR)$(apertium_en_esdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX2).t2x $(BASENAME).$(PREFIX2).t3x $(DESTDIR)$(apertium_en_esdir)
- 
- CLEANFILES = -rf $(TARGETS) modes
- 
diff --git a/pcr/apertium/apertium-en-es/Makefile.in.patch b/pcr/apertium/apertium-en-es/Makefile.in.patch
deleted file mode 100644
index fe7214320..000000000
--- a/pcr/apertium/apertium-en-es/Makefile.in.patch
+++ /dev/null
@@ -1,529 +0,0 @@
---- apertium-en-es-0.8.0/Makefile.in	2011-08-03 20:23:44.000000000 +0200
-+++ src/apertium-en-es-0.8.0/Makefile.in	2014-10-06 10:41:57.714504506 +0200
-@@ -1,9 +1,8 @@
--# Makefile.in generated by automake 1.11.1 from Makefile.am.
-+# Makefile.in generated by automake 1.14.1 from Makefile.am.
- # @configure_input@
- 
--# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
--# Inc.
-+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-+
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -16,6 +15,51 @@
- @SET_MAKE@
- 
- VPATH = @srcdir@
-+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-+am__make_running_with_option = \
-+  case $${target_option-} in \
-+      ?) ;; \
-+      *) echo "am__make_running_with_option: internal error: invalid" \
-+              "target option '$${target_option-}' specified" >&2; \
-+         exit 1;; \
-+  esac; \
-+  has_opt=no; \
-+  sane_makeflags=$$MAKEFLAGS; \
-+  if $(am__is_gnu_make); then \
-+    sane_makeflags=$$MFLAGS; \
-+  else \
-+    case $$MAKEFLAGS in \
-+      *\\[\ \	]*) \
-+        bs=\\; \
-+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-+    esac; \
-+  fi; \
-+  skip_next=no; \
-+  strip_trailopt () \
-+  { \
-+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-+  }; \
-+  for flg in $$sane_makeflags; do \
-+    test $$skip_next = yes && { skip_next=no; continue; }; \
-+    case $$flg in \
-+      *=*|--*) continue;; \
-+        -*I) strip_trailopt 'I'; skip_next=yes;; \
-+      -*I?*) strip_trailopt 'I';; \
-+        -*O) strip_trailopt 'O'; skip_next=yes;; \
-+      -*O?*) strip_trailopt 'O';; \
-+        -*l) strip_trailopt 'l'; skip_next=yes;; \
-+      -*l?*) strip_trailopt 'l';; \
-+      -[dEDm]) skip_next=yes;; \
-+      -[JT]) skip_next=yes;; \
-+    esac; \
-+    case $$flg in \
-+      *$$target_option*) has_opt=yes; break;; \
-+    esac; \
-+  done; \
-+  test $$has_opt = yes
-+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
- pkgdatadir = $(datadir)/@PACKAGE@
- pkgincludedir = $(includedir)/@PACKAGE@
- pkglibdir = $(libdir)/@PACKAGE@
-@@ -33,10 +77,10 @@
- PRE_UNINSTALL = :
- POST_UNINSTALL = :
- subdir = .
--DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
--	$(srcdir)/Makefile.in $(srcdir)/config.in \
--	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
--	install-sh missing
-+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-+	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-+	$(top_srcdir)/configure $(am__configure_deps) \
-+	$(srcdir)/config.in COPYING install-sh missing
- ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
- am__aclocal_m4_deps = $(top_srcdir)/configure.ac
- am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-@@ -47,8 +91,25 @@
- CONFIG_HEADER = config
- CONFIG_CLEAN_FILES =
- CONFIG_CLEAN_VPATH_FILES =
-+AM_V_P = $(am__v_P_@AM_V@)
-+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-+am__v_P_0 = false
-+am__v_P_1 = :
-+AM_V_GEN = $(am__v_GEN_@AM_V@)
-+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-+am__v_GEN_0 = @echo "  GEN     " $@;
-+am__v_GEN_1 =
-+AM_V_at = $(am__v_at_@AM_V@)
-+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-+am__v_at_0 = @
-+am__v_at_1 =
- SOURCES =
- DIST_SOURCES =
-+am__can_run_installinfo = \
-+  case $$AM_UPDATE_INFO_DIR in \
-+    n|no|NO) false;; \
-+    *) (install-info --version) >/dev/null 2>&1;; \
-+  esac
- am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
- am__vpath_adj = case $$p in \
-     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-@@ -70,25 +131,59 @@
- am__base_list = \
-   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-+am__uninstall_files_from_dir = { \
-+  test -z "$$files" \
-+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-+         $(am__cd) "$$dir" && rm -f $$files; }; \
-+  }
- am__installdirs = "$(DESTDIR)$(apertium_en_esdir)"
- DATA = $(apertium_en_es_DATA)
-+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
-+	$(LISP)config.in
-+# Read a list of newline-separated strings from the standard input,
-+# and print each of them once, without duplicates.  Input order is
-+# *not* preserved.
-+am__uniquify_input = $(AWK) '\
-+  BEGIN { nonempty = 0; } \
-+  { items[$$0] = 1; nonempty = 1; } \
-+  END { if (nonempty) { for (i in items) print i; }; } \
-+'
-+# Make sure the list of sources is unique.  This is necessary because,
-+# e.g., the same source file might be shared among _SOURCES variables
-+# for different programs/libraries.
-+am__define_uniq_tagged_files = \
-+  list='$(am__tagged_files)'; \
-+  unique=`for i in $$list; do \
-+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+  done | $(am__uniquify_input)`
-+ETAGS = etags
-+CTAGS = ctags
-+CSCOPE = cscope
-+AM_RECURSIVE_TARGETS = cscope
- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
- distdir = $(PACKAGE)-$(VERSION)
- top_distdir = $(distdir)
- am__remove_distdir = \
--  { test ! -d "$(distdir)" \
--    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
--         && rm -fr "$(distdir)"; }; }
-+  if test -d "$(distdir)"; then \
-+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-+      && rm -rf "$(distdir)" \
-+      || { sleep 5 && rm -rf "$(distdir)"; }; \
-+  else :; fi
-+am__post_remove_distdir = $(am__remove_distdir)
- DIST_ARCHIVES = $(distdir).tar.gz
- GZIP_ENV = --best
-+DIST_TARGETS = dist-gzip
- distuninstallcheck_listfiles = find . -type f -print
-+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
- distcleancheck_listfiles = find . -type f -print
- ACLOCAL = @ACLOCAL@
- ALTXSL = @ALTXSL@
- AMTAR = @AMTAR@
-+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
- APERTIUM_CFLAGS = @APERTIUM_CFLAGS@
- APERTIUM_LIBS = @APERTIUM_LIBS@
--APERTIUM_VER = @APERTIUM_VER@
- AUTOCONF = @AUTOCONF@
- AUTOHEADER = @AUTOHEADER@
- AUTOMAKE = @AUTOMAKE@
-@@ -183,7 +278,7 @@
- 		 $(BASENAME).$(LANG1)-lextor.dix $(BASENAME).$(LANG2)-lextor.dix \
- 		 $(BASENAME).$(PREFIX1)-lextor.dix $(BASENAME).$(PREFIX2)-lextor.dix
- 
--TARGETS = $(TARGETS_COMMON) 
-+TARGETS = $(TARGETS_COMMON)
- EXTRA_DIST = $(BASENAME).post-$(LANG1).dix $(BASENAME).post-$(LANG2).dix \
- 	   $(BASENAME).$(LANG1).tsx \
- 	   $(BASENAME).$(LANG2).tsx \
-@@ -221,7 +316,7 @@
- 	$(MAKE) $(AM_MAKEFLAGS) all-am
- 
- .SUFFIXES:
--am--refresh:
-+am--refresh: Makefile
- 	@:
- $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
- 	@for dep in $?; do \
-@@ -257,15 +352,13 @@
- $(am__aclocal_m4_deps):
- 
- config: stamp-h1
--	@if test ! -f $@; then \
--	  rm -f stamp-h1; \
--	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
--	else :; fi
-+	@test -f $@ || rm -f stamp-h1
-+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
- 
- stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
- 	@rm -f stamp-h1
- 	cd $(top_builddir) && $(SHELL) ./config.status config
--$(srcdir)/config.in:  $(am__configure_deps) 
-+$(srcdir)/config.in:  $(am__configure_deps)
- 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- 	rm -f stamp-h1
- 	touch $@
-@@ -274,8 +367,11 @@
- 	-rm -f config stamp-h1
- install-apertium_en_esDATA: $(apertium_en_es_DATA)
- 	@$(NORMAL_INSTALL)
--	test -z "$(apertium_en_esdir)" || $(MKDIR_P) "$(DESTDIR)$(apertium_en_esdir)"
- 	@list='$(apertium_en_es_DATA)'; test -n "$(apertium_en_esdir)" || list=; \
-+	if test -n "$$list"; then \
-+	  echo " $(MKDIR_P) '$(DESTDIR)$(apertium_en_esdir)'"; \
-+	  $(MKDIR_P) "$(DESTDIR)$(apertium_en_esdir)" || exit 1; \
-+	fi; \
- 	for p in $$list; do \
- 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- 	  echo "$$d$$p"; \
-@@ -289,15 +385,66 @@
- 	@$(NORMAL_UNINSTALL)
- 	@list='$(apertium_en_es_DATA)'; test -n "$(apertium_en_esdir)" || list=; \
- 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
--	test -n "$$files" || exit 0; \
--	echo " ( cd '$(DESTDIR)$(apertium_en_esdir)' && rm -f" $$files ")"; \
--	cd "$(DESTDIR)$(apertium_en_esdir)" && rm -f $$files
--tags: TAGS
--TAGS:
-+	dir='$(DESTDIR)$(apertium_en_esdir)'; $(am__uninstall_files_from_dir)
-+
-+ID: $(am__tagged_files)
-+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-+tags: tags-am
-+TAGS: tags
-+
-+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-+	set x; \
-+	here=`pwd`; \
-+	$(am__define_uniq_tagged_files); \
-+	shift; \
-+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-+	  test -n "$$unique" || unique=$$empty_fix; \
-+	  if test $$# -gt 0; then \
-+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-+	      "$$@" $$unique; \
-+	  else \
-+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-+	      $$unique; \
-+	  fi; \
-+	fi
-+ctags: ctags-am
- 
--ctags: CTAGS
--CTAGS:
-+CTAGS: ctags
-+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-+	$(am__define_uniq_tagged_files); \
-+	test -z "$(CTAGS_ARGS)$$unique" \
-+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-+	     $$unique
-+
-+GTAGS:
-+	here=`$(am__cd) $(top_builddir) && pwd` \
-+	  && $(am__cd) $(top_srcdir) \
-+	  && gtags -i $(GTAGS_ARGS) "$$here"
-+cscope: cscope.files
-+	test ! -s cscope.files \
-+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-+clean-cscope:
-+	-rm -f cscope.files
-+cscope.files: clean-cscope cscopelist
-+cscopelist: cscopelist-am
-+
-+cscopelist-am: $(am__tagged_files)
-+	list='$(am__tagged_files)'; \
-+	case "$(srcdir)" in \
-+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-+	  *) sdir=$(subdir)/$(srcdir) ;; \
-+	esac; \
-+	for i in $$list; do \
-+	  if test -f "$$i"; then \
-+	    echo "$(subdir)/$$i"; \
-+	  else \
-+	    echo "$$sdir/$$i"; \
-+	  fi; \
-+	done >> $(top_builddir)/cscope.files
- 
-+distclean-tags:
-+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
- 
- distdir: $(DISTFILES)
- 	$(am__remove_distdir)
-@@ -340,36 +487,42 @@
- 	|| chmod -R a+r "$(distdir)"
- dist-gzip: distdir
- 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
--	$(am__remove_distdir)
-+	$(am__post_remove_distdir)
- 
- dist-bzip2: distdir
--	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
--	$(am__remove_distdir)
-+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-+	$(am__post_remove_distdir)
- 
--dist-lzma: distdir
--	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
--	$(am__remove_distdir)
-+dist-lzip: distdir
-+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-+	$(am__post_remove_distdir)
- 
- dist-xz: distdir
--	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
--	$(am__remove_distdir)
-+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-+	$(am__post_remove_distdir)
- 
- dist-tarZ: distdir
-+	@echo WARNING: "Support for shar distribution archives is" \
-+	               "deprecated." >&2
-+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
- 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
--	$(am__remove_distdir)
-+	$(am__post_remove_distdir)
- 
- dist-shar: distdir
-+	@echo WARNING: "Support for distribution archives compressed with" \
-+		       "legacy program 'compress' is deprecated." >&2
-+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
- 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
--	$(am__remove_distdir)
-+	$(am__post_remove_distdir)
- 
- dist-zip: distdir
- 	-rm -f $(distdir).zip
- 	zip -rq $(distdir).zip $(distdir)
--	$(am__remove_distdir)
-+	$(am__post_remove_distdir)
- 
--dist dist-all: distdir
--	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
--	$(am__remove_distdir)
-+dist dist-all:
-+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-+	$(am__post_remove_distdir)
- 
- # This target untars the dist file and tries a VPATH configuration.  Then
- # it guarantees that the distribution is self-contained by making another
-@@ -380,8 +533,8 @@
- 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- 	*.tar.bz2*) \
- 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
--	*.tar.lzma*) \
--	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-+	*.tar.lz*) \
-+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
- 	*.tar.xz*) \
- 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- 	*.tar.Z*) \
-@@ -391,17 +544,19 @@
- 	*.zip*) \
- 	  unzip $(distdir).zip ;;\
- 	esac
--	chmod -R a-w $(distdir); chmod a+w $(distdir)
--	mkdir $(distdir)/_build
--	mkdir $(distdir)/_inst
-+	chmod -R a-w $(distdir)
-+	chmod u+w $(distdir)
-+	mkdir $(distdir)/_build $(distdir)/_inst
- 	chmod a-w $(distdir)
- 	test -d $(distdir)/_build || exit 0; \
- 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- 	  && am__cwd=`pwd` \
- 	  && $(am__cd) $(distdir)/_build \
--	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-+	  && ../configure \
-+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
- 	    $(DISTCHECK_CONFIGURE_FLAGS) \
-+	    --srcdir=.. --prefix="$$dc_install_base" \
- 	  && $(MAKE) $(AM_MAKEFLAGS) \
- 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
- 	  && $(MAKE) $(AM_MAKEFLAGS) check \
-@@ -424,13 +579,21 @@
- 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- 	  && cd "$$am__cwd" \
- 	  || exit 1
--	$(am__remove_distdir)
-+	$(am__post_remove_distdir)
- 	@(echo "$(distdir) archives ready for distribution: "; \
- 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
- distuninstallcheck:
--	@$(am__cd) '$(distuninstallcheck_dir)' \
--	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-+	@test -n '$(distuninstallcheck_dir)' || { \
-+	  echo 'ERROR: trying to run $@ with an empty' \
-+	       '$$(distuninstallcheck_dir)' >&2; \
-+	  exit 1; \
-+	}; \
-+	$(am__cd) '$(distuninstallcheck_dir)' || { \
-+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-+	  exit 1; \
-+	}; \
-+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
- 	   || { echo "ERROR: files left after uninstall:" ; \
- 	        if test -n "$(DESTDIR)"; then \
- 	          echo "  (check DESTDIR support)"; \
-@@ -463,10 +626,15 @@
- 
- installcheck: installcheck-am
- install-strip:
--	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
--	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
--	  `test -z '$(STRIP)' || \
--	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-+	if test -z '$(STRIP)'; then \
-+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-+	      install; \
-+	else \
-+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-+	fi
- mostlyclean-generic:
- 
- clean-generic:
-@@ -486,7 +654,7 @@
- distclean: distclean-am
- 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
- 	-rm -f Makefile
--distclean-am: clean-am distclean-generic distclean-hdr
-+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
- 
- dvi: dvi-am
- 
-@@ -550,20 +718,21 @@
- 
- .MAKE: all install-am install-strip
- 
--.PHONY: all all-am am--refresh check check-am clean clean-generic dist \
--	dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \
--	dist-xz dist-zip distcheck distclean distclean-generic \
--	distclean-hdr distcleancheck distdir distuninstallcheck dvi \
--	dvi-am html html-am info info-am install install-am \
--	install-apertium_en_esDATA install-data install-data-am \
--	install-data-local install-dvi install-dvi-am install-exec \
--	install-exec-am install-html install-html-am install-info \
--	install-info-am install-man install-pdf install-pdf-am \
--	install-ps install-ps-am install-strip installcheck \
--	installcheck-am installdirs maintainer-clean \
--	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
--	pdf-am ps ps-am uninstall uninstall-am \
--	uninstall-apertium_en_esDATA
-+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
-+	clean-cscope clean-generic cscope cscopelist-am ctags ctags-am \
-+	dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \
-+	dist-tarZ dist-xz dist-zip distcheck distclean \
-+	distclean-generic distclean-hdr distclean-tags distcleancheck \
-+	distdir distuninstallcheck dvi dvi-am html html-am info \
-+	info-am install install-am install-apertium_en_esDATA \
-+	install-data install-data-am install-data-local install-dvi \
-+	install-dvi-am install-exec install-exec-am install-html \
-+	install-html-am install-info install-info-am install-man \
-+	install-pdf install-pdf-am install-ps install-ps-am \
-+	install-strip installcheck installcheck-am installdirs \
-+	maintainer-clean maintainer-clean-generic mostlyclean \
-+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
-+	uninstall-am uninstall-apertium_en_esDATA
- 
- 
- $(BASENAME).$(LANG1)-lextor.dix: $(BASENAME).$(PREFIX1).dix
-@@ -604,8 +773,8 @@
- 	lt-comp lr .deps/$(LANG1).dix $@ $(BASENAME).$(LANG1).acx
- 
- #$(PREFIX1).automorf.bin: $(BASENAME).$(LANG1).metadix $(BASENAME).$(LANG1).acx
--#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp1gen.xsl 	 
--#	@xsltproc tmp1gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp1 
-+#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp1gen.xsl
-+#	@xsltproc tmp1gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp1
- #	@rm tmp1gen.xsl
- #	apertium-validate-acx $(BASENAME).$(LANG1).acx
- #	apertium-validate-dictionary $(BASENAME).$(LANG1).dixtmp1
-@@ -646,15 +815,15 @@
- 	lt-comp rl .deps/$(LANG1b).dix $@
- 
- #$(PREFIX2).autogen.bin: $(BASENAME).$(LANG1).metadix
--#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp2gen.xsl 	 
-+#	@xsltproc buscaPar.xsl apertium-en-es.en.metadix | uniq > tmp2gen.xsl
- #	@xsltproc tmp2gen.xsl apertium-en-es.en.metadix >$(BASENAME).$(LANG1).dixtmp2
- #	@rm tmp2gen.xsl
- #	apertium-validate-dictionary $(BASENAME).$(LANG1).dixtmp2
- #	lt-comp rl $(BASENAME).$(LANG1).dixtmp2 $@
- #	@rm $(BASENAME).$(LANG1).dixtmp2
- #	@rm $(BASENAME).$(LANG1).metadix
--#	@rm $(BASENAME).$(LANG2).dix	
--#	@rm $(BASENAME).$(LANG1)-$(LANG2).dix	
-+#	@rm $(BASENAME).$(LANG2).dix
-+#	@rm $(BASENAME).$(LANG1)-$(LANG2).dix
- 
- $(PREFIX2).autopgen.bin: $(BASENAME).post-$(LANG1).dix
- 	apertium-validate-dictionary $(BASENAME).post-$(LANG1).dix
-@@ -713,13 +882,13 @@
- 
- install-data-local:
- 	apertium-gen-modes modes.xml apertium-$(PREFIX1)
--	$(INSTALL_DATA) $(PREFIX1).mode $(apertium_en_modesdir)
--	$(INSTALL_DATA) $(PREFIX2).mode $(apertium_en_modesdir)
--	$(INSTALL_DATA) $(PREFIX2b).mode $(apertium_en_modesdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).genitive.t1x $(apertium_en_esdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t1x $(BASENAME).$(PREFIX1).t2x $(apertium_en_esdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t3x $(BASENAME).$(PREFIX2).t1x $(apertium_en_esdir)
--	$(INSTALL_DATA) $(BASENAME).$(PREFIX2).t2x $(BASENAME).$(PREFIX2).t3x $(apertium_en_esdir)
-+	$(INSTALL_DATA) $(PREFIX1).mode $(DESTDIR)$(apertium_en_modesdir)
-+	$(INSTALL_DATA) $(PREFIX2).mode $(DESTDIR)$(apertium_en_modesdir)
-+	$(INSTALL_DATA) $(PREFIX2b).mode $(DESTDIR)$(apertium_en_modesdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).genitive.t1x $(DESTDIR)$(apertium_en_esdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t1x $(BASENAME).$(PREFIX1).t2x $(DESTDIR)$(apertium_en_esdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX1).t3x $(BASENAME).$(PREFIX2).t1x $(DESTDIR)$(apertium_en_esdir)
-+	$(INSTALL_DATA) $(BASENAME).$(PREFIX2).t2x $(BASENAME).$(PREFIX2).t3x $(DESTDIR)$(apertium_en_esdir)
- 
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
- # Otherwise a system limit (for SysV at least) may be exceeded.
diff --git a/pcr/apertium/apertium-en-es/PKGBUILD b/pcr/apertium/apertium-en-es/PKGBUILD
deleted file mode 100644
index 406aca2bb..000000000
--- a/pcr/apertium/apertium-en-es/PKGBUILD
+++ /dev/null
@@ -1,43 +0,0 @@
-# Contributor: Kevin Brubeck Unhammer <unhammer@fsfe.org>
-# Maintainer: Kevin Brubeck Unhammer <unhammer@fsfe.org>
-pkgname=apertium-en-es
-pkgver=0.8.0
-pkgrel=1
-pkgdesc="Apertium language data for the English-Spanish translator."
-url="http://apertium.org"
-license=('GPL')
-makedepends=('pkgconfig')
-depends=('lttoolbox>=3.2' 'apertium>=3.2')
-arch=('i686' 'x86_64')
-source=("http://downloads.sourceforge.net/sourceforge/apertium/${pkgname}-${pkgver}.tar.gz"
-        "configure.ac.patch"
-	"Makefile.am.patch"
-	"Makefile.in.patch")
-md5sums=('4b82c32edbd5315432192799ed641930'
-         '4968bf33612ae8fc3f0d253d81de2c4b'
-         'dfae1753dac1a8720de76829a79c3401'
-         'a93870ddb3343f9913582b44d2a70a12')
-sha256sums=('b497b545982491d6e4c46b69e3167291bfdfae3d988917a996e5c44265f9fcdf'
-            'f8345047daf60bf45f9218a551f4207c5b08ce8d318e1f5462909695e2151875'
-            '35bd9284dcbbded62436f672fa32e5846b21897f23d526f90a1b53b5302e87c1'
-            '1be3c6d97cfd3677df4e85742c3e199e512abf301411a5df05b9ff71b29c5e39')
-
-build() {
-  patch -p1 < configure.ac.patch
-  patch -p1 < Makefile.am.patch
-  patch -p1 < Makefile.in.patch
-
-  cd "$srcdir/$pkgname-$pkgver"
-
-  autoreconf -fi
-
-  ./configure --prefix=/usr
-  make
-}
-
-package() {
-  mkdir -p "$pkgdir/usr/share/apertium/modes"
-
-  cd "$srcdir/$pkgname-$pkgver"
-  make DESTDIR="$pkgdir/" install
-}
\ No newline at end of file
diff --git a/pcr/apertium/apertium-en-es/configure.ac.patch b/pcr/apertium/apertium-en-es/configure.ac.patch
deleted file mode 100644
index 38219b361..000000000
--- a/pcr/apertium/apertium-en-es/configure.ac.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- src/apertium-en-es-0.8.0/configure.ac.old	2014-10-06 10:34:40.274729186 +0200
-+++ src/apertium-en-es-0.8.0/configure.ac	2014-10-06 10:34:47.024262162 +0200
-@@ -10,38 +10,7 @@
- AC_PROG_AWK
- AC_CONFIG_HEADER([config])
- 
--AC_DEFUN([PKG_CHECK_APERTIUM], [
--  APERTIUM_VER=0
--  PKG_CHECK_MODULES(APERTIUM, apertium-1.0 >= 1.0.0,
--  [
--      APERTIUM_VER=10
--  ],
--  [
--      PKG_CHECK_MODULES(APERTIUM, apertium-2.0 >= 2.0.0,
--      [
--          APERTIUM_VER=20
--      ],
--      [
--          PKG_CHECK_MODULES(APERTIUM, apertium-3.0 >= 3.0.0,
--          [
--              APERTIUM_VER=30
--          ],
--          [
--              PKG_CHECK_MODULES(APERTIUM, apertium-3.1 >= 3.1.0,
--              [
--                  APERTIUM_VER=31
--              ],
--              [
--                  PKG_CHECK_MODULES(APERTIUM, apertium-3.2 >= 3.2.0)
--                  APERTIUM_VER=32
--              ])
--          ])
--      ])
--  ])
--  AC_SUBST(APERTIUM_VER)
--])
--                          
--PKG_CHECK_APERTIUM
-+PKG_CHECK_MODULES(APERTIUM,   apertium >= required_apertium_version, [], [PKG_CHECK_MODULES(APERTIUM,   apertium-3.2 >= required_apertium_version)])
- 
- if test $APERTIUM_VER = 10;
- then MODES="";
-@@ -53,5 +22,5 @@
- AC_SUBST(MODES)
- AC_SUBST(ALTXSL)
- 
--  
-+
- AC_OUTPUT([Makefile])