uboot-omap4_panda: add new package to [libre]

4 files changed, 0 insertions, 210 deletions

diff --git a/libre/uboot-pandaboard-linux-libre/0001-parabola-arm-modifications.patch b/libre/uboot-pandaboard-linux-libre/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 01c7ca80a..000000000
--- a/libre/uboot-pandaboard-linux-libre/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
-index 1c93aab..e8b6c90 100644
---- a/include/configs/ti_omap4_common.h
-+++ b/include/configs/ti_omap4_common.h
-@@ -46,7 +46,6 @@
-  * the timings to use or use pre-determined timings (based on using the
-  * dynamic method.  Default to the static timing infomation.
-  */
--#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
- #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-@@ -82,6 +81,12 @@
- #undef CONFIG_CMD_NET
- #undef CONFIG_CMD_NFS
- 
-+/* Parabola GNU/Linux-libre extras */
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+#define CONFIG_SUPPORT_RAW_INITRD
-+#define CONFIG_CMD_PART
-+#define CONFIG_PARTITION_UUIDS
-+
- /*
-  * Environment setup
-  */
-@@ -89,32 +94,57 @@
- 	DEFAULT_LINUX_BOOT_ENV \
- 	"console=ttyO2,115200n8\0" \
- 	"fdtfile=undefined\0" \
--	"bootpart=0:2\0" \
-+	"bootpart=0:1\0" \
- 	"bootdir=/boot\0" \
--	"bootfile=zImage\0" \
-+	"fdtdir=/boot/dtbs/linux-libre\0" \
-+	"bootfile=vmlinuz-linux-libre\0" \
-+	"rdfile=initramfs-linux-libre.img\0" \
- 	"usbtty=cdc_acm\0" \
- 	"vram=16M\0" \
- 	"mmcdev=0\0" \
--	"mmcroot=/dev/mmcblk0p2 rw\0" \
--	"mmcrootfstype=ext3 rootwait\0" \
-+	"optargs=\0" \
-+	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
- 		"vram=${vram} " \
--		"root=${mmcroot} " \
--		"rootfstype=${mmcrootfstype}\0" \
--	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
--	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
--		"source ${loadaddr}\0" \
--	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
--	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
--		"env import -t ${loadaddr} ${filesize}\0" \
--	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
--	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
--	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
--		"run mmcargs; " \
--		"bootz ${loadaddr} - ${fdtaddr}\0" \
--	"uimageboot=echo Booting from mmc${mmcdev} ...; " \
--		"run mmcargs; " \
--		"bootm ${loadaddr}\0" \
-+		"root=${root} " \
-+		"${optargs}\0" \
-+	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+	"mmcboot=usb start;" \
-+		"for devtype in mmc usb; do " \
-+			"setenv devnum 0;" \
-+			"while ${devtype} dev ${devnum}; do " \
-+				"echo ${devtype} found on device ${devnum};" \
-+				"setenv bootpart ${devnum}:1;" \
-+				"part uuid ${devtype} ${bootpart} uuid;" \
-+				"setenv root PARTUUID=${uuid} rw rootwait;" \
-+				"echo Checking for: ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt ...;" \
-+				"if test -e ${devtype} ${bootpart} ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt; then " \
-+					"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt;" \
-+					"env import -t ${loadaddr} ${filesize};" \
-+					"echo Loaded environment from ${bootdir}/uboot-pandaboard-linux-libre/uEnv.txt;" \
-+					"echo Checking if uenvcmd is set ...;" \
-+					"if test -n ${uenvcmd}; then " \
-+						"echo Running uenvcmd ...;" \
-+						"run uenvcmd;" \
-+					"fi;" \
-+				"fi;" \
-+				"if run loadimage; then " \
-+					"run mmcargs;" \
-+					"if run loadfdt; then " \
-+						"if run loadrd; then " \
-+							"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+						"else " \
-+							"bootz ${loadaddr} - ${fdtaddr};" \
-+						"fi;" \
-+					"fi;" \
-+				"else " \
-+					"echo No kernel found;" \
-+				"fi;" \
-+				"setexpr devnum ${devnum} + 1;" \
-+			"done;" \
-+		"done;\0" \
- 	"findfdt="\
- 		"if test $board_name = sdp4430; then " \
- 			"setenv fdtfile omap4-sdp.dtb; fi; " \
-@@ -127,32 +157,11 @@
- 		"if test $board_name = duovero; then " \
- 			"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
- 		"if test $fdtfile = undefined; then " \
--			"echo WARNING: Could not determine device tree to use; fi; \0" \
--	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-+			"echo WARNING: Could not determine device tree to use; fi; \0"
- 
- #define CONFIG_BOOTCOMMAND \
- 	"run findfdt; " \
--	"mmc dev ${mmcdev}; if mmc rescan; then " \
--		"echo SD/MMC found on device ${mmcdev};" \
--		"if run loadbootscript; then " \
--			"run bootscript; " \
--		"else " \
--			"if run loadbootenv; then " \
--				"run importbootenv; " \
--			"fi;" \
--			"if test -n ${uenvcmd}; then " \
--				"echo Running uenvcmd ...;" \
--				"run uenvcmd;" \
--			"fi;" \
--		"fi;" \
--		"if run loadimage; then " \
--			"run loadfdt;" \
--			"run mmcboot; " \
--		"fi; " \
--		"if run loaduimage; then " \
--			"run uimageboot;" \
--		"fi; " \
--	"fi"
-+	"run mmcboot"
- 
- /*
-  * Defines for SPL
--- 
-2.4.2
-
diff --git a/libre/uboot-pandaboard-linux-libre/PKGBUILD b/libre/uboot-pandaboard-linux-libre/PKGBUILD
deleted file mode 100644
index ca3f1beab..000000000
--- a/libre/uboot-pandaboard-linux-libre/PKGBUILD
+++ /dev/null
@@ -1,46 +0,0 @@
-# U-Boot: PandaBoard and PandaBoard ES
-# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org>
-# Contributor: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-_pkgname=linux-libre
-pkgname=uboot-pandaboard-${_pkgname}
-pkgver=2015.04
-pkgrel=1.1
-pkgdesc="U-Boot for PandaBoard and PandaBoard ES (built for the linux-libre kernel package)"
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-makedepends=('bc')
-replaces=('uboot-pandaboard')
-license=('GPL')
-install=${pkgname}.install
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
-        '0001-parabola-arm-modifications.patch'
-        'uEnv.txt')
-md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
-         'ed3771f68122d6846dc9d906df6a1e6d'
-         '86004660f2912861a040e335c9c0e85b')
-
-prepare() {
-  cd u-boot-${pkgver}
-
-  patch -Np1 -i ../0001-parabola-arm-modifications.patch
-}
-
-build() {
-  cd u-boot-${pkgver}
-
-  unset LDFLAGS
-
-  make distclean 
-  make omap4_panda_config
-  make
-}
-
-package() {
-  cd u-boot-${pkgver}
-
-  mkdir -p "${pkgdir}/boot/${pkgname}"
-  cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}/boot/${pkgname}"
-}
diff --git a/libre/uboot-pandaboard-linux-libre/uEnv.txt b/libre/uboot-pandaboard-linux-libre/uEnv.txt
deleted file mode 100644
index 55298e1a9..000000000
--- a/libre/uboot-pandaboard-linux-libre/uEnv.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-# Uncomment and add any additional kernel parameters to optargs
-#optargs=
diff --git a/libre/uboot-pandaboard-linux-libre/uboot-pandaboard-linux-libre.install b/libre/uboot-pandaboard-linux-libre/uboot-pandaboard-linux-libre.install
deleted file mode 100644
index 8d28bcdcf..000000000
--- a/libre/uboot-pandaboard-linux-libre/uboot-pandaboard-linux-libre.install
+++ /dev/null
@@ -1,21 +0,0 @@
-flash_uboot() {
-  echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
-  echo "Do this now? [y|N]"
-  read -r shouldwe
-  if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
-    dd if=/boot/uboot-pandaboard-linux-libre/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k
-    dd if=/boot/uboot-pandaboard-linux-libre/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k
-  else
-    echo "You can do this later by running:"
-    echo "# dd if=/boot/uboot-pandaboard-linux-libre/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
-    echo "# dd if=/boot/uboot-pandaboard-linux-libre/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
-  fi
-}
-
-post_install() {
-  flash_uboot
-}
-
-post_upgrade() {
-  flash_uboot
-}