summaryrefslogtreecommitdiff
path: root/libre/texlive-bin-libre
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2014-08-26 07:04:44 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2014-08-26 07:04:44 -0300
commit224ff53c78c2e8df8c6ac3f5b84964a9fd228ee3 (patch)
tree21f0f00d6ca7a856bde8310b4558a527717a6d85 /libre/texlive-bin-libre
parent317a3b1d822c252c9f341170cf47a85d72cddde6 (diff)
downloadabslibre-224ff53c78c2e8df8c6ac3f5b84964a9fd228ee3.tar.gz
abslibre-224ff53c78c2e8df8c6ac3f5b84964a9fd228ee3.tar.bz2
abslibre-224ff53c78c2e8df8c6ac3f5b84964a9fd228ee3.zip
add parabola suffix on some packages
Diffstat (limited to 'libre/texlive-bin-libre')
-rw-r--r--libre/texlive-bin-libre/09-texlive-fonts.conf9
-rw-r--r--libre/texlive-bin-libre/PKGBUILD311
-rw-r--r--libre/texlive-bin-libre/fix-fontforge-encoding.patch12
-rw-r--r--libre/texlive-bin-libre/luatex-poppler-0.20.patch77
-rw-r--r--libre/texlive-bin-libre/luatex-r4449-radical-rule-thickness.patch23
-rw-r--r--libre/texlive-bin-libre/poppler-0.20.patch22
-rw-r--r--libre/texlive-bin-libre/poppler-0.26.patch104
-rw-r--r--libre/texlive-bin-libre/texlive.install50
-rw-r--r--libre/texlive-bin-libre/texmf.cnf724
9 files changed, 0 insertions, 1332 deletions
diff --git a/libre/texlive-bin-libre/09-texlive-fonts.conf b/libre/texlive-bin-libre/09-texlive-fonts.conf
deleted file mode 100644
index f870fbd7a..000000000
--- a/libre/texlive-bin-libre/09-texlive-fonts.conf
+++ /dev/null
@@ -1,9 +0,0 @@
-<?xml version="1.0"?>
-<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
-<fontconfig>
- <dir>/usr/share/texmf-dist/fonts/opentype</dir>
- <dir>/usr/share/texmf-dist/fonts/truetype</dir>
- <dir>/usr/local/share/texmf/fonts/opentype</dir>
- <dir>/usr/local/share/texmf/fonts/truetype</dir>
-</fontconfig>
-
diff --git a/libre/texlive-bin-libre/PKGBUILD b/libre/texlive-bin-libre/PKGBUILD
deleted file mode 100644
index 03d829d53..000000000
--- a/libre/texlive-bin-libre/PKGBUILD
+++ /dev/null
@@ -1,311 +0,0 @@
-# $Id: PKGBUILD 211863 2014-04-28 15:07:05Z jgc $
-# Maintainer (Arch): Rémy Oudompheng <remy@archlinux.org>
-# Contributor (Arch): francois <francois.archlinux.org>
-# Maintainer: Michał Masłowski <mtjm@mtjm.eu>
-# Contributor: André Silva <emulatorman@parabola.nu>
-
-pkgname=texlive-bin-libre
-pkgver=2013.30973
-pkgrel=10
-pkgdesc="TeX Live binaries, without biber binaries (Parabola rebranded)"
-license=('GPL')
-arch=('i686' 'x86_64' 'mips64el')
-depends=('cairo' 'pixman' 'graphite' 't1lib' 'gd' 'poppler'
- 'libsigsegv' 'zziplib' 'libpng' 'libjpeg' 'freetype2'
- 'icu' 'harfbuzz' 'harfbuzz-icu')
-makedepends=('perl' 'clisp' 'ffcall')
-optdepends=('ed: for texconfig')
-provides=('texlive-bin' 'lcdf-typetools' 'kpathsea' 'xindy' 'pdfjam')
-conflicts=('texlive-bin' 'pdfjam')
-replaces=('texlive-bin')
-options=('!strip')
-url='http://tug.org/texlive/'
-install="texlive.install"
-source=('fix-fontforge-encoding.patch'
- "http://mirrors.kernel.org/archlinux/other/texlive/texlive-bin-source-${pkgver}.tar.xz"
- poppler-0.26.patch
-)
-md5sums=('bfb9716aa00c86c08cd31e5b32edeb98'
- '0a8ffd5c0002a080a4202057b1f106c6'
- '65f5eef04fdf65fe8ff2df873509c855')
-
-prepare() {
- cd source
- patch -Np2 -i ../poppler-0.26.patch
-}
-
-build() {
- cd "$srcdir"
-
- if [ "${CARCH}" != "i686" ]; then
- export CFLAGS="${CFLAGS} -fPIC"
- export CXXFLAGS="${CXXFLAGS} -fPIC"
- fi
-
- # this patch removes spurious error message with locale "xx_YY.utf8"
- #patch -Np0 -i fix-fontforge-encoding.patch
- # t4ht expects to be un /usr/share/texmf/bin/t4ht (FS#27251)
- sed -i s/SELFAUTOPARENT/TEXMFROOT/ source/texk/tex4htk/t4ht.c
- #############################################################
- ### configure
- cd source
- ## prevent compiling Xdvi with libXp
- sed -i~ 's|-lXp ||' texk/xdvik/configure
- test ! -d Work && mkdir Work
- cd Work
- echo "--> Initial configuration..."
- # we use temporary prefix to avoid messing the existing
- # $pkgdir/usr/share/texmf tree
- # system zlib is disabled due to issues with zlib 1.2.6 (FS#28221)
- ../configure --prefix=/usr -C \
- --sysconfdir=/etc \
- --datarootdir=/usr/share \
- --datadir=/usr/share \
- --mandir=/usr/share/man \
- --disable-native-texlive-build \
- --with-banner-add="/Parabola GNU/Linux-libre" \
- --disable-multiplatform \
- --disable-dialog \
- --disable-psutils \
- --disable-t1utils \
- --disable-bibtexu \
- --disable-xz \
- --enable-shared \
- --disable-static \
- --with-system-zlib \
- --with-system-zziplib \
- --with-system-pnglib \
- --with-system-ncurses \
- --with-system-t1lib \
- --with-system-gd \
- --with-system-poppler \
- --with-system-xpdf \
- --with-system-freetype2 \
- --with-system-pixman \
- --with-system-cairo \
- --with-system-harfbuzz \
- --with-system-graphite \
- --with-system-icu \
- --with-freetype2-libdir=/usr/lib \
- --with-freetype2-include=/usr/include/freetype2 \
- --with-xdvi-x-toolkit=xaw \
- --disable-dump-share \
- --disable-aleph \
- --enable-luatex \
- --with-clisp-runtime=default \
- --enable-xindy --disable-xindy-rules --disable-xindy-docs
- #############################################################
- ### make
- echo "-------------------------------------------------------"
- echo "--> Building the whole beast ..."
- echo "-------------------------------------------------------"
- make
-}
-
-package() {
- cd "$srcdir"
-
- #############################################################
- ### install
- cd source
- # fixes for xindy
- find utils/xindy -name Makefile -exec sed -i -e "s|^prefix =.\+$|prefix = $pkgdir/usr|" -e "s|^mandir =.\+$|mandir = \${prefix}/share/man|" -e "s|^datadir =.\+$|datadir = \${datarootdir}/texmf|" -e "s|^docdir =.\+$|docdir = \${datadir}/doc/xindy|" '{}' \;
-
- echo "-------------------------------------------------------"
- echo "--> Proceeding with make install ..."
- echo "-------------------------------------------------------"
- cd Work
- make DESTDIR="${pkgdir}" texmf="$pkgdir"/usr/share/texmf install
- rm -rf "${pkgdir}"/usr/{texmf,share/texmf-dist}
-
- ## install Perl libraries
- mkdir -p "$pkgdir"/usr/share/tlpkg/TeXLive
- install -m644 "${srcdir}"/source/utils/biber/TeXLive/*.pm "${pkgdir}/usr/share/tlpkg/TeXLive"
-
- ## symlink engines by hand. texlinks has moved to texlive-core...
- mkdir -p ${pkgdir}/usr/bin
- ln -s eptex ${pkgdir}/usr/bin/platex
- ln -s euptex ${pkgdir}/usr/bin/uplatex
- ln -s luatex ${pkgdir}/usr/bin/dvilualatex
- ln -s luatex ${pkgdir}/usr/bin/dviluatex
- ln -s luatex ${pkgdir}/usr/bin/lualatex
- ln -s pdftex ${pkgdir}/usr/bin/amstex
- ln -s pdftex ${pkgdir}/usr/bin/cslatex
- ln -s pdftex ${pkgdir}/usr/bin/csplain
- ln -s pdftex ${pkgdir}/usr/bin/eplain
- ln -s pdftex ${pkgdir}/usr/bin/etex
- ln -s pdftex ${pkgdir}/usr/bin/jadetex
- ln -s pdftex ${pkgdir}/usr/bin/latex
- ln -s pdftex ${pkgdir}/usr/bin/mex
- ln -s pdftex ${pkgdir}/usr/bin/mllatex
- ln -s pdftex ${pkgdir}/usr/bin/mltex
- ln -s pdftex ${pkgdir}/usr/bin/pdfetex
- ln -s pdftex ${pkgdir}/usr/bin/pdfcslatex
- ln -s pdftex ${pkgdir}/usr/bin/pdfcsplain
- ln -s pdftex ${pkgdir}/usr/bin/pdfjadetex
- ln -s pdftex ${pkgdir}/usr/bin/pdflatex
- ln -s pdftex ${pkgdir}/usr/bin/pdfmex
- ln -s pdftex ${pkgdir}/usr/bin/pdfxmltex
- ln -s pdftex ${pkgdir}/usr/bin/texsis
- ln -s pdftex ${pkgdir}/usr/bin/utf8mex
- ln -s pdftex ${pkgdir}/usr/bin/xmltex
- ln -s xetex ${pkgdir}/usr/bin/xelatex
-
- #############################################################
- # remove dangling symlinks
- _bibtexextra_scripts="
-bibexport
-listbib
-multibibliography
-urlbst
-"
- _core_scripts="
-a2ping
-a5toa4
-adhocfilelist
-afm2afm
-allcm
-allec
-allneeded
-arara
-arlatex
-autoinst
-bundledoc
-checkcites
-chkweb
-context
-ctanify
-ctanupload
-ctxtools
-de-macro
-deweb
-dosepsbin
-dtxgen
-dvi2fax
-dviasm
-dvired
-e2pall
-epstopdf
-findhyph
-fmtutil
-fmtutil-sys
-fontinst
-fragmaster
-installfont-tl
-kpsepath
-kpsetool
-kpsewhere
-kpsexpand
-latex2man
-latexdiff
-latexdiff-vc
-latexfileversion
-latexmk
-latexpand
-latexrevise
-listings-ext.sh
-ltxfileinfo
-lua2dox_filter
-luaotfload-tool
-luatools
-match_parens
-mf2pt1
-mkjobtexmf
-mkluatexfontdb
-mkt1font
-mktexfmt
-mptopdf
-mtxrun
-ot2kpx
-pdf180
-pdf270
-pdf90
-pdfatfi
-pdfbook
-pdfcrop
-pdfflip
-pdfjam
-pdfjam-pocketmod
-pdfjam-slides3up
-pdfjam-slides6up
-pdfjoin
-pdfnup
-pdfpun
-pfarrei
-pkfix
-pkfix-helper
-ps2eps
-ps2frag
-pslatex
-pstopdf
-purifyeps
-repstopdf
-rpdfcrop
-rungs
-simpdftex
-sty2dtx
-texconfig
-texconfig-dialog
-texconfig-sys
-texcount
-texdef
-texdiff
-texdirflatten
-texdoc
-texdoctk
-texexec
-texindy
-texlinks
-texliveonfly
-texloganalyser
-texmfstart
-thumbpdf
-typeoutfileinfo
-updmap
-updmap-sys
-vpl2ovp
-vpl2vpl
-xindy
-"
- _htmlxml_scripts="ht htcontext htlatex htmex httex httexi htxelatex htxetex mk4ht"
- _langcyrillic_scripts="rubibtex rumakeindex"
- _langcjk_scripts="convbkmk ptex2pdf
-kanji-fontmap-creator
-kanji-config-updmap
-kanji-config-updmap-sys
-"
- _langextra_scripts="ebong"
- _langgreek_scripts="mkgrkindex"
- _latexextra_scripts="
-authorindex
-exceltex
-makeglossaries
-pdfannotextractor
-perltex
-ps4pdf
-splitindex
-svn-multi
-vpe"
- _music_scripts="m-tx musixtex musixflx pmx2pdf"
- _pictures_scripts="cachepic epspdf epspdftk fig4latex mathspic"
- _pstricks_scripts="pedigree pst2pdf"
- _science_scripts="ulqda"
- for s in \
- ${_bibtexextra_scripts} \
- ${_core_scripts} \
- ${_htmlxml_scripts} \
- ${_langcjk_scripts} \
- ${_langcyrillic_scripts} \
- ${_langextra_scripts} \
- ${_langgreek_scripts} \
- ${_latexextra_scripts} \
- ${_music_scripts} \
- ${_pictures_scripts} \
- ${_pstricks_scripts} \
- ${_science_scripts} \
- tlmgr; do
- ! readlink -e "$pkgdir"/usr/bin/$s && rm "$pkgdir"/usr/bin/$s
- done
- ###################################################################
-}
-
diff --git a/libre/texlive-bin-libre/fix-fontforge-encoding.patch b/libre/texlive-bin-libre/fix-fontforge-encoding.patch
deleted file mode 100644
index 8104b3289..000000000
--- a/libre/texlive-bin-libre/fix-fontforge-encoding.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c.orig 2009-09-30 19:27:00.935039526 +0200
-+++ source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c 2009-09-30 19:28:04.908364646 +0200
-@@ -495,6 +495,9 @@
- { "Big5HKSCS", e_big5hkscs },
- { "Big5-HKSCS", e_big5hkscs },
- { "UTF-8", e_utf8 },
-+ { "utf-8", e_utf8 },
-+ { "UTF8", e_utf8 },
-+ { "utf8", e_utf8 },
- { "ISO-10646/UTF-8", e_utf8 },
- { "ISO_10646/UTF-8", e_utf8 },
- { "UCS2", e_unicode },
diff --git a/libre/texlive-bin-libre/luatex-poppler-0.20.patch b/libre/texlive-bin-libre/luatex-poppler-0.20.patch
deleted file mode 100644
index 175824f3e..000000000
--- a/libre/texlive-bin-libre/luatex-poppler-0.20.patch
+++ /dev/null
@@ -1,77 +0,0 @@
---- source/texk/web2c/luatexdir/lua/lepdflib.cc.orig 2011-10-06 06:14:20.000000000 +0000
-+++ source/texk/web2c/luatexdir/lua/lepdflib.cc 2012-05-17 11:30:26.327236883 +0000
-@@ -157,7 +157,7 @@
- pdfdoc_changed_error(L);
- uout = new_Annot_userdata(L);
- uout->d =
-- new Annot((XRef *) uxref->d, (Dict *) udict->d, (Catalog *) ucatalog->d,
-+ new Annot((PDFDoc *) uxref->pd, (Dict *) udict->d,
- (Object *) uref->d);
- uout->atype = ALLOC_LEPDF;
- uout->pc = uxref->pc;
-@@ -179,7 +179,7 @@
- pdfdoc_changed_error(L);
- uout = new_Annots_userdata(L);
- uout->d =
-- new Annots((XRef *) uxref->d, (Catalog *) ucatalog->d,
-+ new Annots((PDFDoc *) uxref->pd,
- (Object *) uannotsobj->d);
- uout->atype = ALLOC_LEPDF;
- uout->pc = uxref->pc;
-@@ -369,7 +369,7 @@
- // Annot
-
- m_poppler_get_BOOL(Annot, isOk);
--m_poppler_get_OBJECT(Annot, getAppearance);
-+m_poppler_get_OBJECT(Annot, getAppearanceResDict);
- m_poppler_get_poppler(Annot, AnnotBorder, getBorder);
-
- static int m_Annot_match(lua_State * L)
-@@ -408,7 +408,7 @@
-
- static const struct luaL_Reg Annot_m[] = {
- {"isOk", m_Annot_isOk},
-- {"getAppearance", m_Annot_getAppearance},
-+ {"getAppearance", m_Annot_getAppearanceResDict},
- {"getBorder", m_Annot_getBorder},
- {"match", m_Annot_match},
- {"__tostring", m_Annot__tostring},
-@@ -1433,7 +1433,7 @@
-
- static int m_Object_getTypeName(lua_State * L)
- {
-- char *s;
-+ const char *s;
- udstruct *uin;
- uin = (udstruct *) luaL_checkudata(L, 1, M_Object);
- if (uin->pd != NULL && uin->pd->pc != uin->pc)
-@@ -2120,7 +2120,7 @@
- if ((uin->pd != NULL && uin->pd->pc != uin->pc)
- || (ucat->pd != NULL && ucat->pd->pc != ucat->pd->pc))
- pdfdoc_changed_error(L);
-- links = ((Page *) uin->d)->getLinks((Catalog *) ucat->d);
-+ links = ((Page *) uin->d)->getLinks();
- if (links != NULL) {
- uout = new_Links_userdata(L);
- uout->d = links;
-@@ -2738,7 +2738,10 @@
- return 1;
- }
-
--m_poppler_get_INT(XRef, getSize);
-+static int m_XRef_getSize(lua_State * L)
-+{
-+ return m_XRef_getNumObjects(L);
-+}
-
- static int m_XRef_getEntry(lua_State * L)
- {
-@@ -2748,7 +2751,7 @@
- if (uin->pd != NULL && uin->pd->pc != uin->pc)
- pdfdoc_changed_error(L);
- i = luaL_checkint(L, 2);
-- size = ((XRef *) uin->d)->getSize();
-+ size = ((XRef *) uin->d)->getNumObjects();
- if (i > 0 && i <= size) {
- uout = new_XRefEntry_userdata(L);
- uout->d = ((XRef *) uin->d)->getEntry(i);
diff --git a/libre/texlive-bin-libre/luatex-r4449-radical-rule-thickness.patch b/libre/texlive-bin-libre/luatex-r4449-radical-rule-thickness.patch
deleted file mode 100644
index f925a1a93..000000000
--- a/libre/texlive-bin-libre/luatex-r4449-radical-rule-thickness.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-Index: source/texk/web2c/luatexdir/tex/mlist.w
-===================================================================
---- source/texk/web2c/luatexdir/tex/mlist.w (revision 4448)
-+++ source/texk/web2c/luatexdir/tex/mlist.w (revision 4449)
-@@ -1798,7 +1798,17 @@
- theta = fraction_rule(cur_style);
- y = var_delimiter(left_delimiter(q), cur_size,
- height(x) + depth(x) + clr + theta, NULL, cur_style);
-- theta = height(y);
-+ /* If |y| is a composite then set |theta| to the height of its top
-+ character, else set it to the height of |y|. */
-+ if (list_ptr(y) != null
-+ && type(list_ptr(y)) == hlist_node
-+ && list_ptr(list_ptr(y)) != null
-+ && type(list_ptr(list_ptr(y))) == glyph_node) { /* and it should be */
-+ theta = char_height(font(list_ptr(list_ptr(y))),
-+ character(list_ptr(list_ptr(y))));
-+ } else {
-+ theta = height(y);
-+ }
- } else {
- y = var_delimiter(left_delimiter(q), cur_size,
- height(x) + depth(x) + clr + theta, NULL, cur_style);
diff --git a/libre/texlive-bin-libre/poppler-0.20.patch b/libre/texlive-bin-libre/poppler-0.20.patch
deleted file mode 100644
index 3bd8183ab..000000000
--- a/libre/texlive-bin-libre/poppler-0.20.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- source/texk/web2c/luatexdir/lua/lepdflib.cc.orig 2011-10-06 06:14:20.000000000 +0000
-+++ source/texk/web2c/luatexdir/lua/lepdflib.cc 2012-05-17 11:30:26.327236883 +0000
-@@ -1433,7 +1433,7 @@
-
- static int m_Object_getTypeName(lua_State * L)
- {
-- char *s;
-+ const char *s;
- udstruct *uin;
- uin = (udstruct *) luaL_checkudata(L, 1, M_Object);
- if (uin->pd != NULL && uin->pd->pc != uin->pc)
---- source/texk/web2c/pdftexdir/pdftosrc.cc.orig 2012-06-24 17:12:34.376329435 +0200
-+++ source/texk/web2c/pdftexdir/pdftosrc.cc 2012-06-24 17:12:25.490003152 +0200
-@@ -134,7 +134,7 @@
- exit(1);
- }
- if (extract_xref_table) {
-- int size = xref->getSize();
-+ int size = xref->getNumObjects();
- int i;
- for (i = 0; i < size; i++) {
- if (xref->getEntry(i)->offset == 0xffffffff)
diff --git a/libre/texlive-bin-libre/poppler-0.26.patch b/libre/texlive-bin-libre/poppler-0.26.patch
deleted file mode 100644
index fde123f62..000000000
--- a/libre/texlive-bin-libre/poppler-0.26.patch
+++ /dev/null
@@ -1,104 +0,0 @@
---- trunk/source/texk/web2c/luatexdir/image/epdf.h 2013/01/20 19:58:26 4559
-+++ trunk/source/texk/web2c/luatexdir/image/epdf.h 2014/01/02 15:35:31 4718
-@@ -40,21 +40,22 @@
- # include <goo/GooString.h>
- # include <goo/gmem.h>
- # include <goo/gfile.h>
--# include "Object.h"
--# include "Stream.h"
--# include "Gfx.h"
--# include "Annot.h"
--# include "Array.h"
--# include "Dict.h"
--# include "XRef.h"
--# include "Catalog.h"
--# include "Link.h"
--# include "Page.h"
--# include "GfxFont.h"
--# include "PDFDoc.h"
--# include "GlobalParams.h"
--# include "Error.h"
--# include "FileSpec.h"
-+# include <Object.h>
-+# include <Stream.h>
-+# include <Gfx.h>
-+# include <Annot.h>
-+# include <Array.h>
-+# include <Dict.h>
-+# include <XRef.h>
-+# include <Catalog.h>
-+# include <StructTreeRoot.h>
-+# include <Link.h>
-+# include <Page.h>
-+# include <GfxFont.h>
-+# include <PDFDoc.h>
-+# include <GlobalParams.h>
-+# include <Error.h>
-+# include <FileSpec.h>
-
- extern "C" {
-
-@@ -81,8 +82,8 @@
- # include "utils/avlstuff.h"
- # include "pdf/pdftypes.h"
-
--# include "lua52/lua.h"
--# include "lua52/lauxlib.h"
-+# include "lua.h"
-+# include "lauxlib.h"
-
- /* pdfgen.w */
- extern int ten_pow[10];
---- trunk/source/texk/web2c/luatexdir/lua/lepdflib.cc 2013/04/05 10:54:08 4629
-+++ trunk/source/texk/web2c/luatexdir/lua/lepdflib.cc 2014/01/02 15:35:31 4718
-@@ -65,6 +65,7 @@
- #define M_PDFRectangle "PDFRectangle"
- #define M_Ref "Ref"
- #define M_Stream "Stream"
-+#define M_StructTreeRoot "StructTreeRoot"
- #define M_XRefEntry "XRefEntry"
- #define M_XRef "XRef"
-
-@@ -96,6 +97,7 @@
- new_poppler_userdata(PDFRectangle);
- new_poppler_userdata(Ref);
- new_poppler_userdata(Stream);
-+new_poppler_userdata(StructTreeRoot);
- new_poppler_userdata(XRef);
-
- //**********************************************************************
-@@ -573,7 +575,11 @@
-
- m_poppler_get_GOOSTRING(Catalog, getBaseURI);
- m_poppler_get_GOOSTRING(Catalog, readMetadata);
-+#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT
- m_poppler_get_poppler(Catalog, Object, getStructTreeRoot);
-+#else
-+m_poppler_get_poppler(Catalog, StructTreeRoot, getStructTreeRoot);
-+#endif
-
- static int m_Catalog_findPage(lua_State * L)
- {
-@@ -2146,14 +2152,22 @@
-
- static int m_PDFDoc_getStructTreeRoot(lua_State * L)
- {
-+#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT
- Object *obj;
-+#else
-+ StructTreeRoot *obj;
-+#endif
- udstruct *uin, *uout;
- uin = (udstruct *) luaL_checkudata(L, 1, M_PDFDoc);
- if (uin->pd != NULL && uin->pd->pc != uin->pc)
- pdfdoc_changed_error(L);
- if (((PdfDocument *) uin->d)->doc->getCatalog()->isOk()) {
- obj = ((PdfDocument *) uin->d)->doc->getStructTreeRoot();
-+#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT
- uout = new_Object_userdata(L);
-+#else
-+ uout = new_StructTreeRoot_userdata(L);
-+#endif
- uout->d = obj;
- uout->pc = uin->pc;
- uout->pd = uin->pd;
diff --git a/libre/texlive-bin-libre/texlive.install b/libre/texlive-bin-libre/texlive.install
deleted file mode 100644
index 4932650e6..000000000
--- a/libre/texlive-bin-libre/texlive.install
+++ /dev/null
@@ -1,50 +0,0 @@
-infodir=usr/share/info
-filelist=(dvipng.info dvips.info eplain.info epspdf.info fontname.info kpathsea.info latex2e-es.info latex2e.info latex2man.info mf2pt1.info tds.info texdraw.info web2c.info)
-
-post_install() {
- if [[ -f usr/bin/mktexlsr ]]; then
- echo ">>> texlive: updating the filename database..."
- usr/bin/mktexlsr
- fi
- if [[ -f usr/bin/fmtutil-sys ]]; then
- echo -n "creating all formats..."
- usr/bin/fmtutil-sys --all 1>/dev/null
- echo " done."
- echo " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)"
- fi
- [[ -x usr/bin/install-info ]] || return 0
- for file in "${filelist[@]}"; do
- install-info "$infodir/$file.gz" "$infodir/dir" 2> /dev/null
- done
-}
-
-post_upgrade() {
- local corename corever _pacout
- if [[ -f usr/bin/mktexlsr ]]; then
- echo ">>> texlive: updating the filename database..."
- usr/bin/mktexlsr
- fi
- _pacout=$(pacman -Q texlive-core 2>/dev/null)
- read corename corever <<< ${_pacout}
- if [[ ${corever} == 2013* ]]; then
- if [[ -f usr/bin/fmtutil-sys ]]; then
- echo -n "recreating all formats..."
- usr/bin/fmtutil-sys --all 1>/dev/null
- echo " done."
- echo " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)"
- fi
- else
- echo "WARNING: not recreating formats since texlive-core has version '$corever'"
- fi
- [[ -x usr/bin/install-info ]] || return 0
- for file in "${filelist[@]}"; do
- install-info "$infodir/$file.gz" "$infodir/dir" 2> /dev/null
- done
-}
-
-pre_remove() {
- [[ -x usr/bin/install-info ]] || return 0
- for file in "${filelist[@]}"; do
- install-info --delete "$infodir/$file.gz" "$infodir/dir" 2> /dev/null
- done
-}
diff --git a/libre/texlive-bin-libre/texmf.cnf b/libre/texlive-bin-libre/texmf.cnf
deleted file mode 100644
index 76975ee5c..000000000
--- a/libre/texlive-bin-libre/texmf.cnf
+++ /dev/null
@@ -1,724 +0,0 @@
-% texmf.cnf for TeXLive/Arch Linux -- runtime path configuration file for kpathsea.
-% Public domain.
-%
-% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
-% updated. Instead, put your changes -- and only your changes, not an
-% entire copy of the full texmf.cnf! -- in ../../texmf.cnf. That is, if
-% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf,
-% add your custom settings to /some/path/to/texlive/2011/texmf.cnf.
-%
-% What follows is a super-summary of what this .cnf file can
-% contain. Please read the Kpathsea manual for more information.
-%
-% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
-% The `=' (and surrounding spaces) is optional.
-% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
-% Long lines can be continued with a \.
-%
-% Earlier entries (in the same or another file) override later ones, and
-% an environment variable foo overrides any texmf.cnf definition of foo.
-%
-% All definitions are read before anything is expanded, so you can use
-% variables before they are defined.
-%
-% If a variable assignment is qualified with `.PROGRAM', it is ignored
-% unless the current executable (last filename component of argv[0]) is
-% named PROGRAM. This foo.PROGRAM construct is not recognized on the
-% right-hand side. For environment variables, use FOO_PROGRAM.
-%
-% Which file formats use which paths for searches is described in the
-% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
-%
-% // means to search subdirectories (recursively).
-% A leading !! means to look only in the ls-R db, never on the disk.
-% In this file, either ; or : can be used to separate path components.
-% A leading/trailing/doubled path separator in the paths will be
-% expanded into the compile-time default. Probably not what you want.
-%
-% Brace notation is supported, for example: /usr/local/{mytex,othertex}
-% expands to /usr/local/mytex:/usr/local/othertex. We make extensive
-% use of this.
-
-
-% Part 1: Search paths and directories.
-
-% This is the parent directory of our several trees, i.e.,
-% /usr/local/texlive/YYYY in the original TeX Live distribution.
-%
-% All trees must be organized according to the TeX Directory Structure
-% (http://tug.org/tds), or files may not be found.
-%
-% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
-TEXMFROOT = $SELFAUTODIR/share
-
-% The tree containing runtime files related to the specific
-% distribution and version.
-TEXMFMAIN = $TEXMFROOT/texmf
-
-% The main tree of packages, distribution-agnostic:
-TEXMFDIST = $TEXMFROOT/texmf-dist
-
-% Local additions to the distribution trees.
-TEXMFLOCAL = /usr/local/share/texmf
-
-% TEXMFSYSVAR, where *-sys store cached runtime data.
-TEXMFSYSVAR = /var/lib/texmf
-
-% TEXMFSYSCONFIG, where *-sys store configuration data.
-TEXMFSYSCONFIG = /etc/texmf
-
-% Per-user texmf tree(s) -- organized per the TDS, as usual. To define
-% more than one per-user tree, set this to a list of directories in
-% braces, as described above. (This used to be HOMETEXMF.) ~ expands
-% to %USERPROFILE% on Windows, $HOME otherwise.
-TEXMFHOME = ~/texmf
-
-% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
-TEXMFVAR = ~/.texlive/texmf-var
-
-% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
-TEXMFCONFIG = ~/.texlive/texmf-config
-
-% List all the texmf trees.
-%
-% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
-% explicitly and before all other trees.
-%
-% TEXMFLOCAL follows TEXMFMAIN (and precedes TEXMFDIST) because the
-% files in TEXMFMAIN are tightly coupled with the particular version of
-% the distribution, such as configuration files. Overriding them would
-% be more likely to cause trouble than help. On the other hand, the
-% bulk of packages and fonts are in TEXMFDIST, and locally-installed
-% versions should take precedence over those -- although it is generally
-% a source of confusion to have different versions of a package
-% installed, whatever the trees, so try to avoid it.
-TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
-
-% Where to look for ls-R files. There need not be an ls-R in the
-% directories in this path, but if there is one, Kpathsea will use it.
-% By default, this is only the !! elements of TEXMF, so that mktexlsr
-% does not create ls-R files in the non-!! elements -- because if an
-% ls-R is present, it will be used, and the disk will not be searched.
-% This is arguably a bug in kpathsea.
-TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
-
-% The system trees. These are the trees that are shared by all users.
-% If a tree appears in this list, the mktex* scripts will use
-% VARTEXFONTS for generated files, if the original tree isn't writable;
-% otherwise the current working directory is used.
-SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFDIST
-
-% Where generated fonts may be written. This tree is used when the sources
-% were found in a system tree and either that tree wasn't writable, or the
-% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
-VARTEXFONTS = $TEXMFVAR/fonts
-
-% On some systems, there will be a system tree which contains all the font
-% files that may be created as well as the formats. For example
-% TEXMFVAR = /var/lib/texmf
-% is used in many distros. In this case, set VARTEXFONTS like this
-%VARTEXFONTS = $TEXMFVAR/fonts
-% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
-%
-% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
-% one of the TEXMF directories (avoids overlapping ls-R files).
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% Usually you will not need to edit any of the following variables.
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% WEB2C is for Web2C specific files. The current directory may not be
-% a good place to look for them.
-WEB2C = $TEXMF/web2c
-
-% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
-% or \openin, including .sty, .eps, etc. We specify paths for all known
-% formats, past or present. Not all of them are built these days.
-
-% Plain TeX. Have the command tex check all directories as a last
-% resort, we may have plain-compatible stuff anywhere.
-TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
-
-% Fontinst needs to read afm files.
-TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}//
-
-% Other plain-based formats.
-TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
-TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
-TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}//
-TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
-TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
-
-% LaTeX 2e specific macros are stored in latex/, macros that can only be
-% used with 2.09 in latex209/. In addition, we look in the directory
-% latex209, useful for macros that were written for 2.09 and do not
-% mention 2e at all, but can be used with 2e.
-TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
-TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//
-TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}//
-
-% MLTeX.
-TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}//
-TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}//
-TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}//
-
-% e-TeX.
-TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}//
-
-% pdfTeX.
-TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
-TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}//
-TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
-TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}//
-
-% pdfeTeX.
-TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}//
-
-% pdfxTeX.
-TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}//
-
-% LuaTeX.
-TEXINPUTS.lualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-TEXINPUTS.luatex = .;$TEXMF/tex/{luatex,plain,generic,}//
-TEXINPUTS.dvilualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-TEXINPUTS.dviluatex = .;$TEXMF/tex/{luatex,plain,generic,}//
-
-% XeTeX.
-TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}//
-TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}//
-TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}//
-
-% Omega / Aleph.
-TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}//
-TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}//
-TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
-TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
-
-% p(La)TeX.
-TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
-TEXINPUTS.platex = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}//
-
-% epTeX.
-TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
-
-% pBibTeX bibliographies and style files.
-BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib//
-BSTINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bst//
-
-% ConTeXt.
-TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic,}//
-
-% jadetex.
-TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
-TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,latex,generic,}//
-
-% XMLTeX.
-TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
-TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
-
-% Miscellany, no longer built.
-TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}//
-TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
-TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}//
-TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}//
-
-% Earlier entries override later ones, so put this generic one last.
-TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}//
-
-% ttf2tfm.
-TTF2TFMINPUTS = .;$TEXMF/ttf2pk//
-
-% Metafont, MetaPost inputs.
-MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
-MPINPUTS = .;$TEXMF/metapost//
-
-% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
-% We want to find the engine-specific file, e.g., cont-en.fmt can
-% exist under both pdftex/ and xetex/. But just in case some formats
-% end up without an engine directory, look directly in web2c/ too.
-% We repeat the same definition three times because of the way fmtutil
-% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
-% will not be found.
-TEXFORMATS = .;$TEXMF/web2c{/$engine,}
-MFBASES = .;$TEXMF/web2c{/$engine,}
-MPMEMS = .;$TEXMF/web2c{/$engine,}
-%
-% As of 2008, pool files don't exist any more (the strings are compiled
-% into the binaries), but just in case something expects to find these:
-TEXPOOL = .;$TEXMF/web2c
-MFPOOL = ${TEXPOOL}
-MPPOOL = ${TEXPOOL}
-
-% support the original xdvi. Must come before the generic settings.
-PKFONTS.XDvi = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
-VFFONTS.XDvi = .;$TEXMF/%s
-PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
-TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}//
-
-% Device-independent font metric files.
-VFFONTS = .;$TEXMF/fonts/vf//
-TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
-
-% The $MAKETEX_MODE below means the drivers will not use a cx font when
-% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init
-% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual.
-% The modeless part guarantees that bitmaps for PostScript fonts are found.
-PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
-
-% Similarly for the GF format, which only remains in existence because
-% Metafont outputs it (and MF isn't going to change).
-GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
-
-% A backup for PKFONTS and GFFONTS. Not used for anything.
-GLYPHFONTS = .;$TEXMF/fonts
-
-% A place to puth everything that doesn't fit the other font categories.
-MISCFONTS = .;$TEXMF/fonts/misc//
-
-% font name map files. This isn't just fonts/map// because ConTeXt
-% wants support for having files with the same name in the different
-% subdirs. Maybe if the programs ever get unified to accepting the same
-% map file syntax the definition can be simplified again.
-TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
-
-% BibTeX bibliographies and style files. bibtex8 also uses these.
-BIBINPUTS = .;$TEXMF/bibtex/bib//
-BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
-
-% MlBibTeX.
-MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
-MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
-
-% .ris and .bltxml bibliography formats.
-RISINPUTS = .;$TEXMF/bibtex/ris//
-BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml//
-
-% MFT style files.
-MFTINPUTS = .;$TEXMF/mft//
-
-% PostScript headers and prologues (.pro); unfortunately, some programs
-% also use this for acessing font files (enc, type1, truetype)
-TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
-TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
-
-% OSFONTDIR is to provide a convenient hook for allowing TeX to find
-% fonts installed on the system (outside of TeX). An empty default
-% value would add "//" to the search paths, so we give it a dummy value.
-% OSFONTDIR = /usr/share/fonts
-
-% PostScript Type 1 outline fonts.
-T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
-
-% PostScript AFM metric files.
-AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
-
-% TrueType outline fonts.
-TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR//
-
-% OpenType outline fonts.
-OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR//
-
-% Type 42 outline fonts.
-T42FONTS = .;$TEXMF/fonts/type42//
-
-% Ligature definition files.
-LIGFONTS = .;$TEXMF/fonts/lig//
-
-% Dvips' config.* files (this name should not start with `TEX'!).
-TEXCONFIG = $TEXMF/dvips//
-
-% Makeindex style (.ist) files.
-INDEXSTYLE = .;$TEXMF/makeindex//
-
-% Font encoding files (.enc).
-ENCFONTS = .;$TEXMF/fonts/enc//
-
-% CMap files.
-CMAPFONTS = .;$TEXMF/fonts/cmap//
-
-% Subfont definition files.
-SFDFONTS = .;$TEXMF/fonts/sfd//
-
-% OpenType feature files (.fea).
-FONTFEATURES=.;$TEXMF/fonts/fea//
-
-% .cid and .cidmap
-FONTCIDMAPS=.;$TEXMF/fonts/cid//
-
-% pdftex config files:
-PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
-
-% Used by DMP (ditroff-to-mpx), called by makempx -troff.
-TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps
-MPSUPPORT = .;$TEXMF/metapost/support
-
-% For xdvi to find mime.types and .mailcap, if they do not exist in
-% ~. These are single directories, not paths.
-% (But the default mime.types, at least, may well suffice.)
-MIMELIBDIR = /etc
-MAILCAPLIBDIR = /etc
-
-% Default settings for the fontconfig library as used by the Windows
-% versions of xetex/xdvipdfmx. On Unixish systems, fontconfig ignores
-% this. ConTeXT MkIV (all platforms) also use these values.
-%
-FONTCONFIG_FILE = fonts.conf
-FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf
-FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache
-
-% TeX documentation and source files, for use with texdoc and kpsewhich.
-TEXDOCS = $TEXMF/doc//
-TEXSOURCES = .;$TEXMF/source//
-
-% Web and CWeb input paths.
-WEBINPUTS = .;$TEXMF/web//
-CWEBINPUTS = .;$TEXMF/cweb//
-
-% Omega-related fonts and other files.
-OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
-OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
-OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
-OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
-OTPINPUTS = .;$TEXMF/omega/otp//
-OCPINPUTS = .;$TEXMF/omega/ocp//
-
-% Some additional input variables for several programs. If you add
-% a program that uses the `other text files' or `other binary files'
-% search formats, you'll want to add their variables here as well.
-T4HTINPUTS = .;$TEXMF/tex4ht//
-
-%% t4ht utility, sharing files with TeX4ht
-TEX4HTFONTSET=alias,iso8859,unicode
-TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
-
-% TeXworks editor configuration and settings
-TW_LIBPATH = $TEXMFCONFIG/texworks
-TW_INIPATH = $TW_LIBPATH
-
-% For security, do not look in . for dvipdfmx.cfg, since the D option
-% would allow command execution.
-DVIPDFMXINPUTS = $TEXMF/dvipdfmx
-
-% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
-%
-% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in
-% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended
-% default expansion of TEXINPUTS will not happen and .lua files under
-% the /tex/ will not be found.
-%
-% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex.
-% The default LUAINPUTS sufficess for luatex and dviluatex.
-%
-LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}//
-
-% Lua needs to look for binary lua libraries distributed with packages.
-CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
-
-% Architecture independent executables.
-TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}//
-
-% Other languages.
-JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java//
-PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl//
-PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
-RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
-
-
-%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
-% KPSE_DOT = .
-
-% This definition isn't used from this .cnf file itself (that would be
-% paradoxical), but the compile-time default in paths.h is built from it.
-% The SELFAUTO* variables are set automatically from the location of
-% argv[0], in kpse_set_program_name.
-%
-% This main texmf.cnf file is installed, for a release YYYY, in a
-% directory such as /usr/local/texlive/YYYY/texmf/web2c/texmf.cnf.
-% Since this file is subject to future updates, the TeX Live installer
-% or human administrator may also create a file
-% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
-% will take precedence over the distributed one under texmf/web2c.
-%
-% For security reasons, it is better not to include . in this path.
-%
-TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
-
-% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
-% expansions from binaries linked against an earlier version of the
-% library, we set $progname and $engine to something non-empty:
-progname = unsetprogname
-engine = unsetengine
-
-
-% Part 2: Options.
-
-% If this option is set to true, `tex a.b' will look first for a.b.tex
-% (within each path element), and then for a.b, i.e., we try standard
-% extensions first. If this is false, we first look for a.b and then
-% a.b.tex, i.e., we try the name as-is first.
-%
-% Both names are always tried; the difference is the order in which they
-% are tried. The setting applies to all searches, not just .tex.
-%
-% This setting only affects names being looked up which *already* have
-% an extension. A name without an extension (e.g., `tex story') will
-% always have an extension added first.
-%
-% The default is true, because we already avoid adding the standard
-% extension(s) in the usual cases. E.g., babel.sty will only look for
-% babel.sty, not babel.sty.tex, regardless of this setting.
-try_std_extension_first = t
-
-% Enable system commands via \write18{...}. When enabled fully (set to
-% t), obviously insecure. When enabled partially (set to p), only the
-% commands listed in shell_escape_commands are allowed. Although this
-% is not fully secure either, it is much better, and so useful that we
-% enable it for everything but bare tex.
-shell_escape = p
-
-% No spaces in this command list.
-%
-% The programs listed here are as safe as any we know: they either do
-% not write any output files, respect openout_any, or have hard-coded
-% restrictions similar or higher to openout_any=p. They also have no
-% features to invoke arbitrary other programs, and no known exploitable
-% bugs. All to the best of our knowledge. They also have practical use
-% for being called from TeX.
-%
-shell_escape_commands = \
-bibtex,bibtex8,\
-kpsewhich,\
-makeindex,\
-repstopdf,\
-
-% we'd like to allow:
-% dvips - but external commands can be executed, need at least -R1.
-% epspdf, ps2pdf, pstopdf - need to respect openout_any,
-% and gs -dSAFER must be used and check for shell injection with filenames.
-% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides,
-% without Unix convert it hardly seems worth it, and Windows convert
-% is something completely different that destroys filesystems, so skip.
-% pygmentize - but is the filter feature insecure?
-% ps4pdf - but it calls an unrestricted latex.
-% rpdfcrop - maybe ok, but let's get experience with repstopdf first.
-% texindy,xindy - but is the module feature insecure?
-% ulqda - but requires optional SHA1.pm, so why bother.
-% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any.
-
-% plain TeX should remain unenhanced.
-shell_escape.tex = f
-shell_escape.initex = f
-
-% This is used by the Windows script wrapper for restricting searching
-% for the purportedly safe shell_escape_commands above to system
-% directories.
-TEXMF_RESTRICTED_SCRIPTS = \
- {!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}//
-
-% Allow TeX \openin, \openout, or \input on filenames starting with `.'
-% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
-% a (any) : any file can be opened.
-% r (restricted) : disallow opening "dotfiles".
-% p (paranoid) : as `r' and disallow going to parent directories, and
-% restrict absolute paths to be under $TEXMFOUTPUT.
-openout_any = p
-openin_any = a
-
-% Write .log/.dvi/etc. files here, if the current directory is unwritable.
-%TEXMFOUTPUT = /tmp
-
-% If a dynamic file creation fails, log the command to this file, in
-% either the current directory or TEXMFOUTPUT. Set to the
-% empty string or 0 to avoid logging.
-MISSFONT_LOG = missfont.log
-
-% Set to a colon-separated list of words specifying warnings to suppress.
-% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
-% TEX_HUSH = checksum:lostchar:readable:special
-% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
-TEX_HUSH = none
-
-% Allow TeX, and MF to parse the first line of an input file for
-% the %&format construct.
-parse_first_line = t
-
-% But don't parse the first line if invoked as "tex", since we want that
-% to remain Knuth-compatible. The src_specials and
-% file_line_error_style settings, as well as the options -enctex,
-% -mltex, -8bit, etc., also affect this, but they are all off by default.
-parse_first_line.tex = f
-parse_first_line.initex = f
-
-% Control file:line:error style messages.
-file_line_error_style = f
-
-% Enable the mktex... scripts by default? These must be set to 0 or 1.
-% Particular programs can and do override these settings, for example
-% dvips's -M option. Your first chance to specify whether the scripts
-% are invoked by default is at configure time.
-%
-% These values are ignored if the script names are changed; e.g., if you
-% set DVIPSMAKEPK to `foo', what counts is the value of the environment
-% variable/config value `FOO', not the `MKTEXPK' value.
-%
-%MKTEXTEX = 0
-%MKTEXPK = 0
-%MKTEXMF = 0
-%MKTEXTFM = 0
-%MKTEXFMT = 0
-%MKOCP = 0
-%MKOFM = 0
-
-% Used by makempx to run TeX. We use "etex" because MetaPost is
-% expecting DVI, and not "tex" because we want first line parsing.
-TEX = etex
-
-% These variables specify the external program called for the
-% interactive `e' option. %d is replaced by the line number and %s by
-% the current filename. The default is specified at compile-time, and
-% we let that stay in place since different platforms like different values.
-%TEXEDIT = vi +%d '%s' % default for Unix
-%TEXEDIT = texworks --position=+%d "%s" % default for Windows
-%MFEDIT = ${TEXEDIT}
-%MPEDIT = ${TEXEDIT}
-
-% The default `codepage and sort order' file for BibTeX8, when none is
-% given as command line option or environment variable.
-BIBTEX_CSFILE = 88591lat.csf
-
-% This variable is specific to Windows. It must be set to 0 or 1. The
-% default is 0. Setting it to 1 tells the Windows script wrappers to
-% use an already installed Perl interpreter if one is found on the
-% search path, in preference to the Perl shipped with TeX Live. Thus,
-% it may be useful if you both (a) installed a full Perl distribution
-% for general use, and (b) need to run Perl programs from TL that use
-% additional modules we don't provide. The TL Perl does provide all the
-% standard Perl modules.
-%
-%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
-
-
-% Part 3: Array and other sizes for TeX (and Metafont).
-%
-% If you want to change some of these sizes only for a certain TeX
-% variant, the usual dot notation works, e.g.,
-% main_memory.hugetex = 20000000
-%
-% If a change here appears to be ignored, try redumping the format file.
-
-% Memory. Must be less than 8,000,000 total.
-%
-% main_memory is relevant only to initex, extra_mem_* only to non-ini.
-% Thus, have to redump the .fmt file after changing main_memory; to add
-% to existing fmt files, increase extra_mem_*. (To get an idea of how
-% much, try \tracingstats=2 in your TeX source file;
-% web2c/tests/memtest.tex might also be interesting.)
-%
-% To increase space for boxes (as might be needed by, e.g., PiCTeX),
-% increase extra_mem_bot.
-%
-% For some xy-pic samples, you may need as much as 700000 words of memory.
-% For the vast majority of documents, 60000 or less will do.
-%
-main_memory = 3000000 % words of inimemory available; also applies to inimf&mp
-extra_mem_top = 0 % extra high memory for chars, tokens, etc.
-extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
-
-% ConTeXt needs lots of memory.
-extra_mem_top.context = 2000000
-extra_mem_bot.context = 4000000
-
-% Words of font info for TeX (total size of all TFM files, approximately).
-% Must be >= 20000 and <= 147483647 (without tex.ch changes).
-font_mem_size = 3000000
-
-% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
-font_max = 9000
-
-% Extra space for the hash table of control sequences.
-hash_extra = 200000
-
-% Max number of characters in all strings, including all error messages,
-% help texts, font names, control sequences. These values apply to TeX.
-pool_size = 3250000
-% Minimum pool space after TeX's own strings; must be at least
-% 25000 less than pool_size, but doesn't need to be nearly that large.
-string_vacancies = 90000
-% Maximum number of strings.
-max_strings = 500000
-% min pool space left after loading .fmt
-pool_free = 47500
-
-% Buffer size. TeX uses the buffer to contain input lines, but macro
-% expansion works by writing material into the buffer and reparsing the
-% line. As a consequence, certain constructs require the buffer to be
-% very large, even though most documents can be handled with a small value.
-buf_size = 200000
-
-% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in
-% the sources), but we don't need that much. The value here suffices
-% for all known free hyphenation patterns to be loaded simultaneously
-% (as TeX Live does).
-%
-trie_size = 1000000
-
-hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767.
- % http://primes.utm.edu/curios/page.php/8191.html
-nest_size = 500 % simultaneous semantic levels (e.g., groups)
-max_in_open = 15 % simultaneous input files and error insertions,
- % also applies to MetaPost
-param_size = 10000 % simultaneous macro parameters, also applies to MP
-save_size = 50000 % for saving values outside current group
-stack_size = 5000 % simultaneous input sources
-
-% These are Omega-specific.
-ocp_buf_size = 500000 % character buffers for ocp filters.
-ocp_stack_size = 10000 % stacks for ocp computations.
-ocp_list_size = 1000 % control for multiple ocps.
-
-% These work best if they are the same as the I/O buffer size, but it
-% doesn't matter much. Must be a multiple of 8.
-dvi_buf_size = 16384 % TeX
-gf_buf_size = 16384 % MF
-
-% It's probably inadvisable to change these. At any rate, we must have:
-% 45 < error_line < 255;
-% 30 < half_error_line < error_line - 15;
-% 60 <= max_print_line;
-% These apply to TeX, Metafont, and MetaPost.
-error_line = 79
-half_error_line = 50
-max_print_line = 79
-
-% Metafont only.
-screen_width.mf = 1664
-screen_depth.mf = 1200
-
-% BibTeX only (max_strings also determines hash_size and hash_prime).
-ent_str_size = 250
-glob_str_size = 5000
-max_strings.bibtex = 35307
-max_strings.bibtex8 = 35307
-max_strings.bibtexu = 35307
-max_strings.pbibtex = 35307
-
-% GFtype only.
-line_length.gftype = 500
-max_rows.gftype = 8191
-max_cols.gftype = 8191