Removed old install files

2 files changed, 0 insertions, 164 deletions

diff --git a/libre/linux-libre/kernel26.install b/libre/linux-libre/kernel26.install
deleted file mode 100644
index 8c0c80c85..000000000
--- a/libre/linux-libre/kernel26.install
+++ /dev/null
@@ -1,147 +0,0 @@
-# arg 1:  the new package version
-# arg 2:  the old package version
-
-KERNEL_NAME=
-KERNEL_VERSION=2.6.39-LIBRE
-
-post_install () {
-  # updating module dependencies
-  echo ">>> Updating module dependencies. Please wait ..."
-  /sbin/depmod $KERNEL_VERSION 
-  # generate init ramdisks
-  echo ">>> MKINITCPIO SETUP"
-  echo ">>> ----------------"
-  echo ">>> If you use LVM2, Encrypted root or software RAID,"
-  echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
-  echo ">>> More information about mkinitcpio setup can be found here:"
-  echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
-  echo ""
-  echo ">>> Generating initial ramdisk, using mkinitcpio.  Please wait..."
-  /sbin/mkinitcpio -p kernel26${KERNEL_NAME}
-}
-
-post_upgrade() {
-  pacman -Q grub &>/dev/null
-  hasgrub=$?
-  pacman -Q grub2 &>/dev/null
-  hasgrub2=$?
-  pacman -Q lilo &>/dev/null
-  haslilo=$?
-  # reminder notices
-  if [ $haslilo -eq 0 ]; then
-    echo ">>>"
-    if [ $hasgrub -eq 0 -o $hasgrub2 -eq 0 ]; then
-      echo ">>> If you use the LILO bootloader, you should run 'lilo' before rebooting."
-    else
-      echo ">>> You appear to be using the LILO bootloader. You should run"
-      echo ">>> 'lilo' before rebooting."
-    fi
-    echo ">>>"
-  fi
-
-  if grep "^[^#]*[[:space:]]/boot" /etc/fstab 2>&1 >/dev/null; then
-    if ! grep "[[:space:]]/boot" /etc/mtab 2>&1 >/dev/null; then
-      echo "WARNING: /boot appears to be a seperate partition but is not mounted"
-      echo "         This is most likely not what you want.  Please mount your /boot"
-      echo "         partition and reinstall the kernel unless you are sure this is OK"
-    fi
-  fi
-
-  if [ "`vercmp $2 2.6.13`" -lt 0 ]; then
-    # important upgrade notice
-    echo ">>>"
-    echo ">>> IMPORTANT KERNEL UPGRADE NOTICE"
-    echo ">>> -------------------------------"
-    echo ">>> As of kernel 2.6.13, DevFS is NO LONGER AVAILABLE!"
-    echo ">>> If you still use DevFS, please make the transition to uDev before"
-    echo ">>> rebooting.  If you really need to stay with DevFS for some reason,"
-    echo ">>> then you can manually downgrade to an older version:"
-    echo ">>>"
-    echo ">>> # pacman -U http://archlinux.org/~judd/kernel/kernel26-scsi-2.6.12.2-1.pkg.tar.gz"
-    echo ">>>"
-    echo ">>> If you choose to downgrade, don't forget to add kernel26-scsi to your"
-    echo ">>> IgnorePkg list in /etc/pacman.conf"
-    echo ">>>"
-    echo ">>> (NOTE: The following portion applies to uDev users as well!)"
-    echo ">>>"
-    echo ">>> If you use any DevFS paths in your GRUB menu.lst, then you will not"
-    echo ">>> be able to boot!  Change your root= parameter to use the classic"
-    echo ">>> naming scheme."
-    echo ">>>"
-    echo ">>> EXAMPLES:"
-    echo ">>> - change root=/dev/discs/disc0/part3 to root=/dev/sda3"
-    echo ">>> - change root=/dev/md/0 to root=/dev/md0"
-    echo ">>>"
-  fi
-  # generate new init ramdisk
-  if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
-    echo ">>> --------------------------------------------------------------"
-    echo ">>> |                          WARNING:                          |"
-    echo ">>> |mkinitrd is not supported anymore in kernel >=2.6.18 series!|"
-    echo ">>> |              Please change to Mkinitcpio setup.            |"
-    echo ">>> --------------------------------------------------------------"
-    echo ">>>"
-  fi
-  # updating module dependencies
-  echo ">>> Updating module dependencies. Please wait ..."
-  /sbin/depmod $KERNEL_VERSION
-  echo ">>> MKINITCPIO SETUP"
-  echo ">>> ----------------"
-  if [ "`vercmp $2 2.6.18`" -lt 0 ]; then
-    echo ">>> Please change your bootloader config files:"
-    echo ">>> Grub: /boot/grub/menu.lst | Lilo: /etc/lilo.conf"
-    echo "------------------------------------------------"
-    echo "| - initrd26.img to kernel26${KERNEL_NAME}.img               |"
-    echo "| - initrd26-full.img to kernel26${KERNEL_NAME}-fallback.img |"
-    echo "------------------------------------------------"
-  fi
-  if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
-    echo ""
-    echo ">>> New PATA/IDE subsystem - EXPERIMENTAL"
-    echo ">>> ----------"
-    echo ">>> To use the new pata drivers, change the 'ide' hook "
-    echo ">>> to 'pata' in /etc/mkinicpio.conf HOOKS="
-    echo ">>> The new system changes: /dev/hd? to /dev/sd?"
-    echo ">>> Don't forget to modify GRUB, LILO and fstab to the"
-    echo ">>> new naming system. "
-    echo ">>> eg: hda3 --> sda3, hdc8 --> sdc8"
-    echo ""
-    echo ">>> piix/ata_piix (Intel chipsets) - IMPORTANT"
-    echo "----------"
-    echo ">>> If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf" 
-    echo ">>> the 'ata_piix' module will be used."
-    echo ">>> This may cause your devices to shift names, eg:"
-    echo ">>> - IDE: devices from hd? to sd?"
-    echo ">>> - SATA: sda might shift to sdc if you have 2 other disks on a PIIX IDE port."
-    echo ">>> To check if this will affect you, check 'mkinitcpio -M' for piix/ata_piix"
-    echo ""
-  fi
-
-  echo ">>> If you use LVM2, Encrypted root or software RAID,"
-  echo ">>> Ensure you enable support in /etc/mkinitcpio.conf ."
-  echo ">>> More information about mkinitcpio setup can be found here:"
-  echo ">>> http://wiki.archlinux.org/index.php/Mkinitcpio"
-  echo ""
-  echo ">>> Generating initial ramdisk, using mkinitcpio.  Please wait..."
-if [ "`vercmp $2 2.6.19`" -lt 0 ]; then
-  /sbin/mkinitcpio -p kernel26${KERNEL_NAME} -m "ATTENTION:\nIf you get a kernel panic below
-and are using an Intel chipset, append 'earlymodules=piix' to the
-kernel commandline"
-else
-  /sbin/mkinitcpio -p kernel26${KERNEL_NAME}
-fi
-if [ "`vercmp $2 2.6.21`" -lt 0 ]; then
-  echo ""
-  echo "Important ACPI Information:"
-  echo ">>> Since 2.6.20.7 all possible ACPI parts are modularized."
-  echo ">>> The modules are located at:"
-  echo ">>> /lib/modules/$(uname -r)/kernel/drivers/acpi"
-  echo ">>> For more information about ACPI modules check this wiki page:"
-  echo ">>> 'http://wiki.archlinux.org/index.php/ACPI_modules'"
-fi
-}
-
-post_remove() {
-  rm -f /boot/kernel26${KERNEL_NAME}.img
-  rm -f /boot/kernel26${KERNEL_NAME}-fallback.img
-}
diff --git a/libre/linux-libre/kernel26.preset b/libre/linux-libre/kernel26.preset
deleted file mode 100644
index 742a44239..000000000
--- a/libre/linux-libre/kernel26.preset
+++ /dev/null
@@ -1,17 +0,0 @@
-# mkinitcpio preset file for kernel26
-
-########################################
-# DO NOT EDIT THIS LINE:
-source /etc/mkinitcpio.d/kernel26.kver
-########################################
-ALL_config="/etc/mkinitcpio.conf"
-
-PRESETS=('default' 'fallback')
-
-#default_config="/etc/mkinitcpio.conf"
-default_image="/boot/kernel26.img"
-#default_options=""
-
-#fallback_config="/etc/mkinitcpio.conf"
-fallback_image="/boot/kernel26-fallback.img" 
-fallback_options="-S autodetect"
\ No newline at end of file