libre-testing: remove outdated u-boot packages

All these u-boot pakcages were consolidated in SOC specific packages
instead of board specific pakcages in libre.

In addition the libre packages are more recent and in sync with the
Parabola armv7h installation manual.

Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>

1 files changed, 0 insertions, 370 deletions

diff --git a/libre-testing/uboot4grub-udoo/0001-parabola-arm-modifications+grub-support.patch b/libre-testing/uboot4grub-udoo/0001-parabola-arm-modifications+grub-support.patch
deleted file mode 100644
index 70903de64..000000000
--- a/libre-testing/uboot4grub-udoo/0001-parabola-arm-modifications+grub-support.patch
+++ /dev/null
@@ -1,370 +0,0 @@
-diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg
---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg	2015-10-16 14:43:36.733740112 -0300
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+
-+DATA 4, MX6_MMDC_P0_MDPDC,	0x0002002D
-+DATA 4, MX6_MMDC_P0_MDOTC,	0x00333040
-+
-+DATA 4, MX6_MMDC_P0_MDCFG0,	0x3F4352F3
-+DATA 4, MX6_MMDC_P0_MDCFG1,	0xB66D8B63
-+DATA 4, MX6_MMDC_P0_MDCFG2,	0x01FF00DB
-+
-+DATA 4, MX6_MMDC_P0_MDMISC,	0x00001740
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00008000
-+DATA 4, MX6_MMDC_P0_MDRWD,	0x000026D2
-+
-+
-+DATA 4, MX6_MMDC_P0_MDOR,	0x00431023
-+DATA 4, MX6_MMDC_P0_MDASP,	0x00000027
-+DATA 4, MX6_MMDC_P0_MDCTL,	0x831A0000
-+
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x02008032
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00008033
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00048031
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x05208030
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x04008040
-+
-+DATA 4, MX6_MMDC_P0_MPZQHWCTRL,	0xa1390003
-+DATA 4, MX6_MMDC_P1_MPZQHWCTRL,	0xa1390003
-+
-+DATA 4, MX6_MMDC_P0_MDREF,	0x00007800
-+
-+DATA 4, MX6_MMDC_P0_MPODTCTRL,	0x00022227
-+DATA 4, MX6_MMDC_P1_MPODTCTRL,	0x00022227
-+
-+DATA 4, MX6_MMDC_P0_MPDGCTRL0,	0x425C0251
-+DATA 4, MX6_MMDC_P0_MPDGCTRL1,	0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL0,	0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL1,	0x01730200
-+
-+DATA 4, MX6_MMDC_P0_MPRDDLCTL,	0x45474C45
-+DATA 4, MX6_MMDC_P1_MPRDDLCTL,	0x44464744
-+DATA 4, MX6_MMDC_P0_MPWRDLCTL,	0x3F3F3336
-+DATA 4, MX6_MMDC_P1_MPWRDLCTL,	0x32383630
-+
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL0,	0x002F0038
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL1,	0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL0,	0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL1,	0x001F001F
-+
-+DATA 4, MX6_MMDC_P0_MPMUR0,	0x00000000
-+DATA 4, MX6_MMDC_P1_MPMUR0,	0x00000000
-+
-+DATA 4, MX6_MMDC_P0_MDPDC,	0x0002556D
-+DATA 4, MX6_MMDC_P0_MAPSR,	0x00011006
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00000000
-diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg
---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg	2015-10-16 14:43:36.733740112 -0300
-@@ -0,0 +1,84 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ *
-+ * Device Configuration Data (DCD)
-+ *
-+ * Each entry must have the format:
-+ * Addr-type           Address        Value
-+ *
-+ * where:
-+ *      Addr-type register length (1,2 or 4 bytes)
-+ *      Address   absolute address of the register
-+ *      value     value to be stored in the register
-+ */
-+
-+/*
-+ * DDR3 settings
-+ * MX6Q    ddr is limited to 1066 Mhz	currently 1056 MHz(528 MHz clock),
-+ *	   memory bus width: 64 bits	x16/x32/x64
-+ * MX6DL   ddr is limited to 800 MHz(400 MHz clock)
-+ *	   memory bus width: 64 bits	x16/x32/x64
-+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
-+ *	   memory bus width: 32 bits	x16/x32
-+ */
-+DATA 4, MX6_IOM_DRAM_SDQS0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS1,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS2,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS3,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS4,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS5,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS6,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS7,	0x00000028
-+
-+DATA 4, MX6_IOM_GRP_B0DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B1DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B2DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B3DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B4DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B5DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B6DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B7DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_ADDDS,	0x00000028
-+
-+DATA 4, MX6_IOM_GRP_CTLDS,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_DQM0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM1,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM2,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM3,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM4,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM5,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM6,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM7,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_CAS,	0x00000028
-+DATA 4, MX6_IOM_DRAM_RAS,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_1,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_RESET,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_SDODT0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDODT1,	0x00000028
-+
-+/* (differential input) */
-+DATA 4, MX6_IOM_DDRMODE_CTL,	0x00020000
-+/* (differential input) */
-+DATA 4, MX6_IOM_GRP_DDRMODE,	0x00020000
-+/* disable ddr pullups */
-+DATA 4, MX6_IOM_GRP_DDRPKE,	0x00000000
-+DATA 4, MX6_IOM_DRAM_SDBA2,	0x00000000
-+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-+DATA 4, MX6_IOM_GRP_DDR_TYPE,	0x000C0000
-+
-+/* Read data DQ Byte0-3 delay */
-+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL,	0x33333333
-diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg
---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/udoo-dl.cfg	2015-10-16 14:43:36.733740112 -0300
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2013 Boundary Devices
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ *
-+ * Refer doc/README.imximage for more details about how-to configure
-+ * and create imximage boot image
-+ *
-+ * The syntax is taken as close as possible with the kwbimage
-+ */
-+
-+/* image version */
-+IMAGE_VERSION 2
-+
-+/*
-+ * Boot Device : one of
-+ * spi, sd (the board has no nand neither onenand)
-+ */
-+BOOT_FROM      sd
-+
-+#define __ASSEMBLY__
-+#include <config.h>
-+#include "asm/arch/mx6-ddr.h"
-+#include "asm/arch/iomux.h"
-+#include "asm/arch/crm_regs.h"
-+
-+#include "ddr-setup_dl.cfg"
-+#include "1066mhz_4x256mx16_dl.cfg"
-+#include "clocks.cfg"
-diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig
---- u-boot-2015.01.orig/configs/udoo_dl_defconfig	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/configs/udoo_dl_defconfig	2015-10-16 14:43:36.747072798 -0300
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024"
-+CONFIG_ARM=y
-+CONFIG_TARGET_UDOO=y
-diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h
---- u-boot-2015.01.orig/include/configs/udoo.h	2015-01-12 12:39:08.000000000 -0200
-+++ u-boot-2015.01/include/configs/udoo.h	2015-10-16 18:33:35.589059733 -0300
-@@ -78,7 +78,7 @@
- #define CONFIG_CMD_BMODE
- #define CONFIG_CMD_SETEXPR
- 
--#define CONFIG_BOOTDELAY		3
-+#define CONFIG_BOOTDELAY		1
- 
- #define CONFIG_SYS_MEMTEST_START	0x10000000
- #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-@@ -96,60 +96,83 @@
- #define CONFIG_BOUNCE_BUFFER
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
- 
-+/* GRUB support */
-+#define CONFIG_API
-+#define CONFIG_SYS_MMC_MAX_DEVICE	1
-+
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-+#define CONFIG_DEFAULT_FDT_FILE		"imx6dl-udoo.dtb"
-+#elif defined(CONFIG_MX6Q)
- #define CONFIG_DEFAULT_FDT_FILE		"imx6q-udoo.dtb"
-+#endif
- 
- #define CONFIG_EXTRA_ENV_SETTINGS \
--	"script=boot.scr\0" \
--	"image=zImage\0" \
--	"console=ttymxc1\0" \
-+	"grubfile=grub/arm-uboot/core.img\0" \
-+	"bootdir=/boot\0" \
-+	"console=ttymxc1,115200\0" \
- 	"splashpos=m,m\0" \
--	"fdt_high=0xffffffff\0" \
--	"initrd_high=0xffffffff\0" \
--	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
--	"fdt_addr=0x18000000\0" \
--	"boot_fdt=try\0" \
- 	"ip_dyn=yes\0" \
-+	"optargs=\0" \
-+	"video=\0" \
- 	"mmcdev=0\0" \
--	"mmcpart=1\0" \
--	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
--	"update_sd_firmware_filename=u-boot.imx\0" \
--	"update_sd_firmware=" \
--		"if test ${ip_dyn} = yes; then " \
--			"setenv get_cmd dhcp; " \
-+	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
-+	"mmcargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
-+		"root=${mmcroot} " \
-+		"video=${video}\0" \
-+	"videoargs=" \
-+		"setenv nextcon 0; " \
-+		"if hdmidet; then " \
-+			"setenv bootargs ${bootargs} " \
-+				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
-+					"if=RGB24; " \
-+			"setenv fbmem fbmem=28M; " \
-+			"setexpr nextcon ${nextcon} + 1; " \
- 		"else " \
--			"setenv get_cmd tftp; " \
-+			"echo - no HDMI monitor;" \
- 		"fi; " \
--		"if mmc dev ${mmcdev}; then "	\
--			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
--				"setexpr fw_sz ${filesize} / 0x200; " \
--				"setexpr fw_sz ${fw_sz} + 1; "	\
--				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
--			"fi; "	\
--		"fi\0" \
--	"mmcargs=setenv bootargs console=${console},${baudrate} " \
--		"root=${mmcroot}\0" \
--	"loadbootscript=" \
--		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
--	"bootscript=echo Running bootscript from mmc ...; " \
--		"source\0" \
--	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
--	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
--	"mmcboot=echo Booting from mmc ...; " \
--		"run mmcargs; " \
--		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if run loadfdt; then " \
--				"bootz ${loadaddr} - ${fdt_addr}; " \
-+		"i2c dev 1; " \
-+		"if i2c probe 0x10; then " \
-+			"setenv bootargs ${bootargs} " \
-+				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-+					"if=RGB666; " \
-+			"if test 0 -eq ${nextcon}; then " \
-+				"setenv fbmem fbmem=10M; " \
- 			"else " \
--				"if test ${boot_fdt} = try; then " \
--					"bootz; " \
--				"else " \
--					"echo WARN: Cannot load the DT; " \
--				"fi; " \
-+				"setenv fbmem ${fbmem},10M; " \
- 			"fi; " \
-+			"setexpr nextcon ${nextcon} + 1; " \
- 		"else " \
--			"bootz; " \
-+			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-+		"fi; " \
-+		"setenv bootargs ${bootargs} ${fbmem}\0" \
-+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${grubfile}\0" \
-+	"mmcboot=mmc dev ${mmcdev}; " \
-+		"if mmc rescan; then " \
-+			"echo SD/MMC found on device ${mmcdev};" \
-+			"setenv bootpart ${mmcdev}:1; " \
-+			"echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+			"if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \
-+				"load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+				"env import -t ${loadaddr} ${filesize};" \
-+				"echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+				"echo Checking if uenvcmd is set ...;" \
-+				"if test -n ${uenvcmd}; then " \
-+					"echo Running uenvcmd ...;" \
-+					"run uenvcmd;" \
-+				"fi;" \
-+			"fi; " \
-+			"if run loadimage; then " \
-+				"run mmcargs;" \
-+			"else " \
-+				"echo No GRUB found;" \
-+			"fi;" \
- 		"fi;\0" \
- 	"netargs=setenv bootargs console=${console},${baudrate} " \
- 		"root=/dev/nfs " \
-@@ -161,32 +184,10 @@
- 		"else " \
- 			"setenv get_cmd tftp; " \
- 		"fi; " \
--		"${get_cmd} ${image}; " \
--		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
--				"bootz ${loadaddr} - ${fdt_addr}; " \
--			"else " \
--				"if test ${boot_fdt} = try; then " \
--					"bootz; " \
--				"else " \
--					"echo WARN: Cannot load the DT; " \
--				"fi; " \
--			"fi; " \
--		"else " \
--			"bootz; " \
--		"fi;\0"
-+		"${get_cmd} ${grubfile};\0"
- 
- #define CONFIG_BOOTCOMMAND \
--	   "mmc dev ${mmcdev}; if mmc rescan; then " \
--		   "if run loadbootscript; then " \
--			   "run bootscript; " \
--		   "else " \
--			   "if run loadimage; then " \
--				   "run mmcboot; " \
--			   "else run netboot; " \
--			   "fi; " \
--		   "fi; " \
--	   "else run netboot; fi"
-+	"run mmcboot;"
- 
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_LONGHELP
-@@ -227,6 +228,7 @@
- 
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
- 
- #ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE